SECURITIES AND EXCHANGE COMMISSION

Washington, DC 20549

Form 8-K

CURRENT REPORT

Pursuant to Section 13 or 15(d) of the Securities Exchange Act of 1934

Date of Report (Date of earliest event reported): May 2, 2024

KULR TECHNOLOGY GROUP, INC.

(Exact name of the registrant as specified in its charter)

Delaware

001-40454

81-1004273

(State or other jurisdiction of
incorporation)

(Commission

File Number)

(IRS Employer Identification
No.)

4863 Shawline Street, San Diego, California 92111

(Address of principle executive offices) (Zip code)

Registrant’s telephone number, including area code: (408) 663-5247

(Former name or address if changed since last report)

Check the appropriate box below if the Form 8-K filing is intended to simultaneously satisfy the filing obligation of the registrant under any of the following provisions (see General Instruction A.2. below):

¨	Written communications pursuant to Rule 425 under the Securities Act (17 CFR 230.425)

¨	Soliciting material pursuant to Rule 14A-12 under the Exchange Act (17 CFR 240.14a-12)

¨	Pre-commencement communications pursuant to Rule 14D-2(b) under the Exchange Act (17 CFR 240.14d-2(b))

¨	Pre-commencement communications pursuant to Rule 13e-4(c) under the Exchange Act (17 CFR 240.13e-4(c))

Securities registered pursuant to Section 12(b) of the Act:

Title of Each Class		Trading Symbol(s)		Name of Each Exchange on Which Registered
Common Stock		KULR		NYSE American LLC

Indicate by check mark whether the registrant is an emerging growth company as defined in as defined in Rule 405 of the Securities Act of 1933 (§230.405) or Rule 12b-2 of the Securities Exchange Act of 1934 (§240.12b-2).

Emerging growth company ¨

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ¨

Item 7.01

Regulation FD Disclosure

On May 2, 2024, KULR Technology Group, Inc. (the “Company” or “KULR”) issued a press release announcing that the Company recently leveraged its battery production capabilities at its newly instituted Webster, Texas, facility to support NASA with rapid technical aid and production assistance to help prepare the administration’s R5 flight battery.

A copy of the above-mentioned press release is attached herewith as Exhibit 99.1.

By filing this Current Report on Form 8-K and furnishing the information contained herein, the Company makes no admission as to the materiality of any information in this report that is required to be disclosed solely by reason of Regulation FD. The Company uses, and will continue to use, its website, press releases, and various social media channels, including its Twitter account (twitter.com/kulrtech), its LinkedIn account (linkedin.com/company/kulr-technology-corporation), its Facebook account (facebook.com/KULRTechnology), its TikTok account (tiktok.com/Kulr_tech), its Instagram account (instagram.com/Kulr_tech), and its YouTube account (youtube.com/channel/UC3wZBPINQd51N6p35Mo5uQg), as additional means of disclosing public information to investors, the media and others interested in the Company. It is possible that certain information that the Company posts on its website, disseminated in press releases and on social media could be deemed to be material information, and the Company encourages investors, the media and others interested in the Company to review the business and financial information that the Company posts on its website, disseminates in press releases and on the social media channels identified above, as such information could be deemed as material information.

The information in this Item 7.01 disclosure, including Exhibit 99.1, is being furnished and shall not be deemed “filed” for purposes of Section 18 of the Securities Exchange Act of 1934, as amended (the “Exchange Act”), or otherwise subject to the liabilities under that Section. In addition, the information in this Item 7.01 disclosure, including Exhibits 99.1, shall not be incorporated by reference into the filings of the Company under the Securities Act of 1933, as amended, or the Exchange Act, except as shall be expressly set forth by specific reference in such filing.

Item 9.01

Exhibits

Exhibit No.		Description
99.1		Press Release dated May 2, 2024
104		Cover Page Interactive Data File (embedded within the Inline XBRL document)

SIGNATURES

Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on behalf of the undersigned hereunto duly authorized.

	KULR TECHNOLOGY GROUP, INC.

Date: May 2, 2024	By:	/s/ Michael Mo
		Michael Mo
		Chief Executive Officer

Exhibit 99.1

KULR Technology Group Lends Battery Production Infrastructure for Rapid Support of NASA's R5 Program

KULR’s New Texas Battery Center of Excellence Facility Demonstrates Fast Turn-Around Time for Customers

SAN DIEGO / GLOBENEWSWIRE / May 02, 2024 / KULR Technology Group, Inc. (NYSE American: KULR) (the "Company" or "KULR"), "), a global leader in safe and high-performance energy storage solutions, today announced the Company recently leveraged its battery production capabilities at its newly instituted Webster, Texas facility to support NASA with rapid technical aid and production assistance to help prepare the administration’s R5 flight battery for its quickly approaching Firefly mission. R5, or “Realizing Rapid, Reduced-cost high-Risk Research”, refers to CubeSats designed to operate in Low Earth Orbit (“LEO”) at an affordable cost.

Project objectives require the R5 teams to rely on commercial-off-the-shelf (“COTS”) components whenever possible. More information about the R5 program and its strategy can be found here. A recent round of testing revealed that the battery design required a more robust electrical interconnect (busbar) to supplement the COTS nature of the design. Within six hours of engagement, the KULR team was able to provide NASA’s R5 Team with a solution which successfully passed additional testing the following week. This engagement in particular highlights the collaborative spirit and mindset that drives the Company’s Webster, Texas facility where the singular goal is to provide rapid turnaround energy storage solutions, whether it be for KULR’s commercially marketed KULR ONE Space platform or something entirely customized, such as NASA’s R5 program. KULR’s current facility infrastructure was designed and built upon a goal of providing a holistic approach to battery design in the form of KULR ONE Design Solutions (K1-DS). With K1-DS, KULR can provide in-house and custom battery (1) Design, (2) Testing Services, (3) Analysis/Modeling, (4) Abuse Testing, (5) Cell-Level Characterization and Cycling, (6) Fabrication, and (7) Production Services, all in-one-shop.

Lithium battery technology has been utilized in satellites for over two decades, enhancing mission calendar life, reducing weight, and lowering total cost of ownership for satellite manufacturers and operators. As satellite manufacturers prioritize reduced size and costs, they are consistently seeking advancements in battery technology that offer lighter weight, longer lifespan, and enhanced safety. KULR's comprehensive services, coupled with rapid response turnaround, uniquely position the Company to provide battery solutions for the space industry.

As the space sector enters a new era, the space economy is projected to reach $1.8 trillion by 2035, driven by the increasing prevalence of satellite and rocket-enabled technologies. This forecast comes from a recent collaborative report by the World Economic Forum and consultancy firm McKinsey & Company.

The KULR team, which maintains around-the-clock preparedness for rapid turnaround engagements such as the R5 program, continues to keenly focus on in progress programs including, but not limited to, previously announced Army DEVCOM engagements (categorized as KULR ONE Guardian), expansion of the KULR ONE Space (K1S) portfolio into the CubeSat and SmallSat markets, customized battery design activities, and preparedness for low volume but high technical niche battery production. Additionally, KULR is currently relocating all abuse testing services to its Webster, Texas facility while expanding overall testing capacity by threefold.

William Walker, KULR CTO, stated, "The mission of KULR is bold and is more than just developing next generation energy storage systems. We aim to flip the script for how batteries are designed and what development timelines and costs customers can expect for both custom and semi-custom packs. What we are accomplishing in Webster, Texas exemplifies our execution towards accomplishing that mission. We look forward to adding additional capabilities to the facility soon, and more importantly, we look forward to continued customer engagements where we will focus on providing custom-designed KULR ONE solutions.”

About KULR Technology Group, Inc.

KULR Technology Group Inc. (NYSE American: KULR) is a leading energy management platform company offering proven solutions that play a critical role in accelerating the electrification of the circular economy. Leveraging a foundation in developing, manufacturing, and licensing next-generation carbon fiber thermal management technologies for batteries and electronic systems, KULR has evolved its holistic suite of products and services to enable its customers across disciplines to operate with efficiency and sustainability in mind. For more information, please visit www.kulrtechnology.com.

Safe Harbor Statement

This press release does not constitute an offer to sell or a solicitation of offers to buy any securities of any entity. This release contains certain forward-looking statements based on our current expectations, forecasts and assumptions that involve risks and uncertainties. Forward-looking statements in this release are based on information available to us as of the date hereof. Our actual results may differ materially from those stated or implied in such forward-looking statements, due to risks and uncertainties associated with our business, which include the risk factors disclosed in our Form 10-K filed with the Securities and Exchange Commission on April 12, 2024, as may be amended or supplemented by other reports we file with the Securities and Exchange Commission from time to time. Forward-looking statements include statements regarding our expectations, beliefs, intentions, or strategies regarding the future and can be identified by forward-looking words such as “anticipate,” “believe,” “could,” “estimate,” “expect,” “intend,” “may,” “should,” and “would” or similar words. All forecasts are provided by management in this release are based on information available at this time and management expects that internal projections and expectations may change over time. In addition, the forecasts are entirely on management’s best estimate of our future financial performance given our current contracts, current backlog of opportunities and conversations with new and existing customers about our products and services. We assume no obligation to update the information included in this press release, whether as a result of new information, future events or otherwise. 
 

Investor Relations:

KULR Technology Group, Inc.

Phone: 858-866-8478 x 847

Email: [email protected]