8-K

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 8-K

---

CURRENT REPORT

Pursuant to Section 13 OR 15(d)

of The Securities Exchange Act of 1934

Date of Report (Date of earliest event reported): February 4, 2020

ENCISION,INC.

(Exact name of registrant as specified in its charter)

Colorado	001-11789	84-1162056
(State or other jurisdiction <br><br>of incorporation)	(Commission<br><br>File Number)	(I.R.S. Employer<br><br> Identification No.)
6797 Winchester Circle, Boulder, Colorado	80301
---	---
(Address of principal executive offices)	(Zip Code)
(303) 444-2600
---
(Registrant’s telephone number, including area code)
(Former name or former address, if changed since last report.)
---
Check the appropriate box below if the Form 8-K filing is intended to simultaneously satisfy the filing obligation of the registrant under any of the following provisions (see General Instruction A.2. below):
☐ Written communications pursuant to Rule 425 under the Securities Act (17 CFR 230.425)
☐ Soliciting material pursuant to Rule 14a-12 under the Exchange Act (17 CFR 240.14a-12)
☐ Pre-commencement communications pursuant to Rule 14d-2(b) under the Exchange Act (17 CFR 240.14d-2(b))
☐ Pre-commencement communications pursuant to Rule 13e-4(c) under the Exchange Act (17 CFR 240.13e-4(c))

Securities registered pursuant to Section 12(b) of the Act:

Title of each class	Trading<br><br> <br>Symbol(s)	Name of each exchange<br><br> <br>on which registered
Common Stock, no par value	ECIA	OTC Bulletin Board

Indicate by check mark whether the registrant is an emerging growth company as defined in Rule 405 of the Securities Act of 1933 (§230.405 of this chapter) or Rule 12b-2 of the Securities Exchange Act of 1934 (§240.12b-2 of this chapter).

Emerging growth company ☐

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐

---

Item 2.02 Results of Operations and Financial Condition.

On February 4, 2020, Encision, Inc. issued a press release announcing its third quarter financial results for the quarter ended December 31, 2020. The full text of the press release is furnished as Exhibit 99.1 to this Current Report on Form 8-K.

---

---

Item 9.01 Financial Statements and Exhibits.

(d) Exhibits.

99.1	Press Release issued by Encision, Inc., February 4, 2021

The information included herein and in Exhibit 99.1 shall not be deemed “filed” for purposes of Section 18 of the Securities Exchange Act of 1934 (“Exchange Act”) or otherwise subject to the liabilities of that section, nor shall it be deemed incorporated by reference in any filing under the Securities Act of 1933 or the Exchange Act, except as expressly set forth by specific reference in such filing.

SIGNATURES

Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned hereunto duly authorized.

	ENCISION, INC.
	(Registrant)
Date:  February<br> 4, 2021
	/s/ Mala M Ray
	Mala M Ray
	Controller
	Principal Accounting Officer

Exhibit 99.1

February 4, 2021

Encision Reports Third Quarter Fiscal Year 2021 Results

Boulder, Colorado, February 4, 2021 -- Encision Inc. (PK:ECIA), a medical device company owning patented Active Electrode Monitoring (AEM®) Technology that prevents dangerous stray electrosurgical burns in minimally invasive surgery, today announced financial results for its fiscal 2021 third quarter that ended December 31, 2020.

The Company posted quarterly net revenue of $2.16 million for a quarterly net income of $599 thousand, or $0.05 per diluted share. Net income included $599 thousand of extinguishment of debt income. These results compare to net revenue of $2.04 million for a quarterly net income of $70 thousand, or $0.01 per diluted share, in the year-ago quarter. Gross margin on net revenue was 51% in the fiscal 2021 third quarter and 53% in the fiscal 2020 third quarter.

The Company posted nine months net revenue of $5.39 million for a nine months net income of $469 thousand, or $0.04 per diluted share. Net income included $599 thousand of extinguishment of debt income. These results compare to net revenue of $5.89 million for a nine months net loss of $82 thousand, or $(0.01) per diluted share, in the year-ago nine months. Gross margin on net revenue was 51% in the fiscal 2021 nine months and 52% in the fiscal 2020 nine months.

“As a result of COVID-19 limiting surgical procedures, product revenue for our third quarter of fiscal 2021 decreased 2% from our third quarter of last year. Total revenue, which included service revenue, increased 6% from our third quarter of last year,” said Gregory Trudel, President and CEO of Encision Inc. “With the current increases of Covid-19 cases, we remain watchful of the state of surgery and will do all we can to support our customers.”

“We entered into a Master Services Agreement with Auris Health, Inc. (“Auris Health”) in April 2020. Auris Health is a part of the Johnson & Johnson family of companies. Under the agreement, we will collaborate on the integration of AEM technology into monopolar instrumentation produced by Auris Health for advanced surgical applications. This work is ongoing and is reported separately, as service revenue, in our Statement of Operations.”

“At the end of our second quarter, we began to sell our AEM 2X enTouch® Scissors (“2X Scissors”). 2X Scissors bring new levels of performance and economy to the surgical scissor market by combining the best in class performance of our enTouch Disposable Scissors with the value and economy of a multi-use device. 2X Scissors are a game-changing product that will have a significant impact on the disposable laparoscopic scissor market. Our enTouch Disposable Scissors have long been the surgeon preferred product because of their sharpness and micro-serrations. Our new 2X Scissors provide all those benefits at half the cost per use and reduce hospital waste and the impact on the environment as well. The new thermochromic technology integrated into 2X Scissors lets the hospital know when to replace the scissors with new ones and makes tracking their use simple and easy. Superior performance, superior value, easy to use, and easy on the environment – that’s what customers want in a disposable scissor. It is the way that everything is going. We expect 2X Scissors to gain an attractive sales trajectory and to become a significant part of our portfolio of products. 2X Scissors work perfectly with hot AEM dissection and are priced to be used for cold dissection as well. 2X Scissors will open new use segments for us and create an opportunity for customers to standardize on our entire portfolio of Active Electrode Monitoring (AEM®) products. We are delighted to sell 2X Scissors and look forward to delivering other high performance and high customer value product innovations going forward.”

“In April, we entered into an unsecured promissory note under the Paycheck Protection Program (the “PPP”) for a principal amount of $598,567. Under the terms of the CARES Act, a PPP loan recipient may apply for, and be granted, forgiveness for all or a portion of loans granted under the PPP. Such forgiveness will be determined based upon the use of loan proceeds for payroll costs, rent and utility costs, and the maintenance of employee and compensation levels. In the quarter that ended December 31, 2020, we achieved the requirements for forgiveness, and all of the $598,567 was forgiven. We recognized the forgiveness as extinguishment of debt income of $598,567. In the quarter that ends March 31, 2021, we applied for a second PPP loan.

“On August 4, we received $150,000 in loan funding from the U.S. Small Business Administration (“SBA”) under the Economic Injury Disaster Loan (“EIDL”) program administered by the SBA, which program was expanded pursuant to the CARES Act. The EIDL is evidenced by a promissory note, dated August 1 in the original principal amount of $150,000 with the SBA, the lender. The EIDL note term is for thirty years.”

Encision Inc. designs and markets a portfolio of high-performance surgical instrumentation that delivers advances in patient safety with AEM technology, surgical performance, and value to hospitals across a broad range of minimally invasive surgical procedures. Based in Boulder, Colorado, the company pioneered the development and deployment of Active Electrode Monitoring, AEM technology, to eliminate dangerous stray energy burns during minimally invasive procedures. For additional information about all our products, please visit www.encision.com.

In accordance with the safe harborprovisions of the Private Securities Litigation Reform Act of 1995, the Company notes that statements in this press release andelsewhere that look forward in time, which include everything other than historical information, involve risks and uncertaintiesthat may cause actual results to differ materially from those indicated by the forward-looking statements. Factors that could causethe Company’s actual results to differ materially include, among others, its ability to develop new or enhanced productsand have such products accepted in the market, its ability to increase net sales through the Company’s distribution channels,its ability to compete successfully against other manufacturers of surgical instruments, insufficient quantity of new account conversions,insufficient cash to fund operations, delay in developing new products and receiving FDA approval for such new products and otherfactors discussed in the Company’s filings with the Securities and Exchange Commission. Readers are encouraged to reviewthe risk factors and other disclosures appearing in the Company’s Annual Report on Form 10-K for the year ended March 312020 and subsequent filings with the Securities and Exchange Commission. We do not undertake any obligation to update publiclyany forward-looking statements, whether as a result of the receipt of new information, future events, or otherwise.

CONTACT: Mala Ray, Encision Inc., 303-444-2600, mray@encision.com

---

---

---

---

Encision Inc.

Unaudited Condensed Statements of Operations

(in thousands, except per share information)

---

	Three Months Ended					Nine Months Ended
	December 31, 2020		December 31, 2019			December 31, 2020			December 31, 2019
Product revenue	$	1,999	$	2,039		$	5,093		$	5,892
Service revenue		164		—			298			—
Total revenue		2,163		2,039			5,391			5,892
Product cost of revenue		976		956			2,501			2,827
Service cost of revenue		81		—			150			—
Total cost of revenue		1,057		956			2,651			2,827
Gross profit		1,106		1,083			2,740			3,065
Operating expenses:
Sales and marketing		581		544			1,513			1,612
General and administrative		373		294			999			943
Research and development		139		159			443			568
Total operating expenses		1,093		997			2,955			3,123
Operating income (loss)		13		86			(215	)		(58	)
Interest expense and other expense, net		586		(16	)		684			(24	)
Loss before provision for income taxes		599		70			469			(82	)
Provision for income taxes		—		—			—			—
Net income (loss)	$	599	$	70		$	469		$	(82	)
Net income (loss) per share—basic and diluted	$	0.05	$	0.01		$	0.04		$	(0.01	)
Weighted average number of basic shares		11,583		11,578			11,583			11,565
Weighted average number of diluted shares		11,709		11,631			11,750			11,565

---

---

Encision Inc.

Unaudited Condensed Balance Sheets

(in thousands)

	December 31, 2020			March 31, 2020
ASSETS
Cash and cash equivalents	$	854		$	385
Accounts receivable, net		1,043			881
Inventories, net		1,522			1,626
Prepaid expenses		179			73
Total current assets		3,598			2,965
Equipment, net		166			207
Patents, net		222			228
Right of use asset		1,127			1,317
Other assets		20			20
Total assets	$	5,133		$	4,737
LIABILITIES AND SHAREHOLDERS’ EQUITY
Accounts payable	$	475		$	445
Line of credit		—			370
Accrued compensation		233			219
Other accrued liabilities		294			96
Accrued lease liability		296			278
Total current liabilities		1,298			1,408
Accrued lease liability		1,005			1,145
Economic injury disaster loan		152			—
Total liabilities		2,455			2,553
Common stock and additional paid-in capital		24,257			24,232
Accumulated (deficit)		(21,579	)		(22,048	)
Total shareholders’ equity		2,678			2,184
Total liabilities and shareholders’ equity	$	5,133		$	4,737

Encision Inc.

Unaudited Condensed Statements of Cash Flows

(in thousands)

---

	Nine Months Ended
	December 31, 2020			December 31, 2019
Operating activities:
Net income (loss)	$	469		$	(82	)
Adjustments to reconcile net loss to cash <br>(used in) operating activities:
Extinguishment of debt income		(599	)		—
Depreciation and amortization		68			112
Share-based compensation expense		25			22
(Recovery from) provision for doubtful accounts, net		(31	)		10
Provision for (recovery from) inventory obsolescence, net		24			(9	)
Other income from release of accounts payable		(56	)		—
Changes in operating assets and liabilities:
Right of use asset, net		68			30
Accounts receivable		(130	)		(59	)
Inventories		80			121
Prepaid expenses and other assets		(108	)		11
Accounts payable		87			(69	)
Accrued compensation and other accrued liabilities		212			(132	)
Net cash provided by (used in) operating activities		109			(45	)
Investing activities:
Acquisition of property and equipment		(4	)		(53	)
Patent costs		(16	)		(5	)
Net cash (used in) investing activities		(20	)		(58	)
Financing activities:
Paydown of credit facility, net change		(371	)		—
EIDL loan		152			—
Proceeds from PPP loan		599			—
Net cash generated by financing activities		380			—
Net increase (decrease) in cash and cash equivalents		469			(103	)
Cash and cash equivalents, beginning of period		385			298
Cash and cash equivalents, end of period	$	854		$	195

---

---

---