Earnings Call Transcript
ICHOR HOLDINGS, LTD. (ICHR)
Earnings Call Transcript - ICHR Q1 2020
Operator, Operator
Good day, ladies and gentlemen. And welcome to the Ichor Systems' First Quarter 2020 Earnings Conference Call. At this time, all parties are in a listen-only mode. Later we will conduct a question-and-answer session and instructions will be given at that time. As a reminder, this conference is being recorded. I would now like to introduce your host for today's conference, Claire McAdams, Investor Relations for Ichor. Please go ahead.
Claire McAdams, Investor Relations
Thank you, Jessie. Good afternoon, and thank you for joining today's first quarter 2020 conference call. As you read our earnings press release and as you listen to this conference call, please recognize that both contain forward-looking statements within the meaning of the federal securities laws. These forward-looking statements, including those made about the impact of the ongoing COVID-19 pandemic on our operations and the industry at large, are subject to a number of risks and uncertainties, many of which are beyond our control and could cause actual results to differ materially from such statements. These risks and uncertainties include those spelled out in our earnings press release, those described in our Annual Report on Form 10-K for fiscal year 2019 on file with the SEC, and those described in subsequent filings with the SEC. As noted in these aforementioned filings, we remind you that the COVID-19 pandemic continues to create significant volatility, uncertainty and turmoil in our industry, limiting our ability to provide longer-term forward-looking statements. You should consider all forward-looking statements in light of those and other risks and uncertainties. Additionally, we will be providing certain non-GAAP financial measures during this conference call. Our earnings press release and the financial supplement posted to our IR website each provide a reconciliation of these non-GAAP financial measures to their most comparable GAAP financial measures. On the call with me today are Jeff Andreson, our CEO, and Larry Sparks, our CFO. Jeff will begin with an update on our business and a review of our results and outlook, and then Larry will provide additional details of our first quarter results and second quarter guidance. After their prepared remarks, we will open the line for questions. I'll now turn over the call to Jeff Andreson. Jeff?
Jeff Andreson, CEO
Thank you, Claire. Welcome to our Q1 earnings call. I hope that all of you on the call today and your families are healthy and safe. During the first quarter, our operations were impacted by the global COVID-19 pandemic with each of our locations being affected by shelter-in-place requirements. We had several of our sites temporarily experience full shutdowns, most notably our California and Malaysian operations. In spite of these challenges, our flexible manufacturing strategies and the exceptional efforts of our employees worldwide enabled us to achieve strong quarter-on-quarter revenue growth of 16%, ahead of the vast majority of our peers in the semiconductor equipment supply chain. Total sales of $220 million also represent industry-leading organic growth of 60% compared to the same period last year. We are immensely proud of our teams globally for their Q1 performance to achieve this level of revenue growth in light of the obstacles associated with the COVID-19 pandemic. Before I move to an update on our strategic growth initiatives, I'd like to provide you with more details regarding the impact of the COVID-19 pandemic on Ichor. Our first priority remains the safety of our workforce and business partners and their families. We are complying with all public health directives in place for each of our sites. We have implemented procedures in each site that include spacing, temperature monitoring, and additional cleaning procedures to protect the safety of our employees, as well as design plans to quickly react to any potential exposures we may face. Additionally, all employees who can perform their jobs remotely are working from home. During periods of shutdowns, we kept all our employees on our payroll. It is an integral part of our values to care for all our employees and to treat them with respect. While furloughs would have saved us money in the first quarter, we believe the long-term benefits of our approach will always outweigh the near-term cost. Our second priority is to maximize our output and support our customers' delivery requirements while continuing to drive our strategic growth initiatives. We are working closely with our customers to ensure that we support their shipment plans in light of challenges both in capacity and supply chain. The initial impacts of the pandemic were mainly associated with our supply base in China during February, as we had several key suppliers that were closed for three to four weeks, delaying our ability to ship some of our backlog. Those suppliers largely recovered by the end of the quarter and are operating well now. In mid-March, California and Malaysia announced the first shelter-in-place orders affecting our operations, with similar requirements following shortly thereafter at our sites in Texas, Oregon, and Minnesota. For a period of about two weeks, this essentially shut down our ability to provide certain weldments and components to our customers. More recently, Singapore expanded their shelter-in-place practices as well. Malaysia, in particular, has experienced the most prolonged disruption in their factories. Malaysia is a critical country in the worldwide WFE supply chain, and we are very pleased to have a manufacturing facility there. Our customers prefer suppliers to be close to their factories, and we will continue to be committed to Malaysia. It is great news that our Malaysia operation was just recently approved to resume full operation, and we expect to be near free COVID capacity level in the next several weeks as we readjust the factory for the new spacing requirements. In each of the countries in which we operate, we have been designated an essential business supporting the critical infrastructure IT industry, which allows us to operate. That being said, our capacity levels have been somewhat impacted by the spacing protocols that we are now required to follow. So while March and April were very challenging, we are seeing the situation improve here in early May. Our supply chain is strong. We are working closely with our supply base and supporting them during these challenging times. In return, they have kept parts flowing. We have built a strong inventory position in order to continue to support the strong level of demand from our customers. Ichor has been doing an excellent job executing our business continuity plans to address these challenges and uncertainties. And I want to thank everyone for their dedication and commitment to supporting the company as we navigate through the COVID-19 pandemic. Now I'd like to discuss the demand environment we are operating in today. In general, the demand for semiconductor equipment remains strong and has not changed much over the course of the last quarter. We are seeing increased demand from each of our largest customers and across all of our businesses, driven by continued strong levels of foundry and logic investment and a modest degree of recovery in memory spending. However, many in the industry are experiencing manufacturing output limitations, primarily as a result of the social distancing requirements, which is stretching lead times. We are seeing steady improvements in those constraints, and any unfilled backlog exiting the second quarter, we expect will roll into the following quarter. Before I discuss the outlook for the second quarter, I will review the progress that we’re making against our revenue growth objectives for the year. In spite of the current challenges, our team has executed on the fastest ever three-quarter ramp in the company's history, growing quarterly revenues organically by 60% since the second quarter of 2019. Given that we believe the underlying industry improvement was between 20% and 30% over the same period, at least half of this revenue growth was a direct result of our increased market share and growing footprint within our served markets. In gas delivery, we are continuing to execute on opportunities to increase our share with our largest customers and with our customer base in Asia. In weldments and in precision machining, we continue to work on additional qualifications across our customer base. We are on track with our plans so far this year, with some of these gains contributing to our revenue growth in the first quarter. Another factor driving our revenue growth in 2020 will be success in penetrating new customers, especially those in Asia. In the area of chemical delivery, specifically with our proprietary Liquid Delivery Module, the largest opportunity for this business is with customers in Japan and Korea, and we are actively in discussion with several potential new OEM customers. As I reported on our last call, we shipped the first beta unit to a Korean OEM in the first quarter, and we are in discussion with other potential new OEM customers, all of which will position us for a meaningful contribution from this region starting in 2021. And finally, we are benefiting from the continued ramp of EUV lithography with year-over-year growth in shipments expected for both 2020 and 2021. Each of these factors we believe will enable us to achieve revenue growth, outperforming the overall industry in 2020. Further, we continue to make progress on our strategy to increase the engineering and IP content for Ichor. We started with our Liquid Delivery Module and are making good strides there and are continuing to work on our next generation gas panel. We continue to invest in this area and are making good progress in the development of this proprietary gas delivery solution and expect to have our first beta units delivered this year. These proprietary products are the cornerstones of our strategy to increase the engineering and IP content for Ichor in order to drive longer-term expansion of our share of our served markets, as well as to drive the operating model towards increased levels of profitability. Before I turn the call over to Larry, I will share our outlook for the second quarter revenues. We expect revenues in the range of $180 million to $220 million. We have expanded the range given the level of uncertainties that remain, with the high end of the range incorporating no additional restrictions on our manufacturing sites and a quicker than anticipated recovery of our weldment capacity. At the midpoint of our revenue guidance, Ichor's first half of 2020 will be up over 50% from the same period last year, approximately twice the level of growth of our overall peer group. The range is wide, however, as while we are seeing improvements, we are still operating in a dynamic and changing environment. To summarize, the team did a great job managing through the challenges we've encountered as a result of the pandemic to deliver the third highest revenue quarter in the company's history, delivered solid financial performance, and made good strides against our strategic growth initiatives. We continue to operate in a strong demand environment and believe that the long-term growth drivers remain intact. I'll now turn the call over to Larry to provide an update on the financial performance and our outlook.
Larry Sparks, CFO
Thanks, Jeff. First, I would like to remind you that the P&L metrics discussed today are non-GAAP measures unless I identify the measure as GAAP based. These measures exclude the impact of share-based compensation expense, amortization of acquired intangible assets, non-recurring charges, and discrete tax items and adjustments. There is a very helpful schedule summarizing our GAAP and non-GAAP financial results, including the individual line items for non-GAAP operating expenses, such as R&D and SG&A in the investor's section of our website for reference during this call. As Jeff mentioned, the COVID-19 pandemic created a challenging operational environment for the company in the first quarter. In spite of these challenges, first quarter revenue was $220 million, an increase of 16% from the fourth quarter and up 60% from the same period last year. This was our fourth straight quarter of sequential revenue growth and reflects continued strength in customer demand. Gross margin for the quarter was 13.8%, unchanged from Q4. On the strength of higher revenue and improved factory utilization, we had forecast sequential improvement in gross margin of approximately 100 basis points in Q1. However, the disruption to our operations resulting from the COVID-19 pandemic had a negative impact on margin, completely offsetting the expected increase in the quarter. The pandemic affected gross margin from both a factory output and higher cost perspective. Most of the impact was the direct or indirect result of shelter-in-place orders and temporary shutdowns of our operations in multiple locations. These disruptions had a negative impact on factory overhead absorption and the mix of products we were able to ship during the quarter. For example, our higher margin weldment business was significantly constrained in the quarter and represented a smaller portion of our sales and expectations. We also incurred a number of additional direct costs related to managing the COVID-19 disruptions to our operations and changing customer priorities. To support our customers while ensuring the safety and health of our workforce required us to change production workflows, increase expedited freight, increase factory cleaning, expand employee PPE deployment, and incur higher overtime and shift premiums. In total, the COVID-19 pandemic had at least a 100 basis point negative impact on gross margin, and we expect a similar impact in the second quarter. Operating expenses came in above forecast for the quarter at $14.6 million, due primarily to higher seasonal, legal, and other G&A expenses versus forecast. The impact of COVID-19 on operating expenses was not significant, and we expect operating expenses to trend slightly lower in the coming quarters. Together, the negative gross margin impact due to COVID-19 and the higher operating expenses resulted in operating profit of $16 million, approximately $3 million lower than we forecast at the low end of our original revenue guidance. This equates to $0.12 per share of impact on EPS with our reported Q1 EPS of $0.52 versus the $0.64 guided at the low end of our original revenue guidance range. Our interest expense in the first quarter declined as expected to about $2.4 million, and our tax rate for the quarter was 10.2%. Our planning rate for tax over the next couple of years continues to be in the range of 10% to 13%. Net income for the quarter was $12 million, up 10% from Q4 and more than doubling from the same period last year. Now I will turn to the balance sheet. We ended the quarter with $42 million of cash compared to $61 million at year-end. We generated approximately $13 million of cash from the P&L. However, working capital increased by $34 million in the quarter, resulting in negative operating cash flow of $21 million. The primary increases in working capital were in inventory to support the significant ramp in revenue volumes and lower payables. Inventory turns remained at 5.6. Day sales outstanding were 36 days, an improvement compared to the last couple of quarters. We ended the quarter with total debt of $184 million, an increase of $3 million from year-end, with a net increase on our revolver of $5 million, offset by a $2 million reduction in our term loan. Our revolver balance was $24 million out of $125 million available. In the current COVID-19 environment, we are laser-focused on our cash situation and ensuring adequate liquidity in the company to support projected long-term business growth. Our revolving credit line gives us significant flexibility, and we are highly confident we will remain within all bank covenants governing our credit facilities. We continue to forecast much higher revenue levels than we sustained during the recent five-quarter long industry downturn. Even during the lowest 12-month revenue period, which ended September 2019, we remained below our contractual three times EBITDA coverage calculation. We feel very comfortable with our debt levels and capitalization given our current outlook. Now I will turn to our second quarter guidance. With revenue guidance in the range of $180 million to $220 million, our earnings guidance of $0.32 to $0.54 per share reflects similar gross margin levels as Q1 and slightly lower operating expenses. We are forecasting similar interest expenses and tax rates to Q1 and 23.2 million shares outstanding. While it is too early to say with great confidence, we expect the majority of the gross margin headwind related to COVID-19 will be behind us after this quarter. Our historical gross margin flow-through is in the low 20s, and the longer-term goal remains to drive greater gross margin accretion through incremental cost reduction programs, growing our share within higher margin component markets and increasing our content of proprietary IP within our products.
Operator, Operator
Thank you. We will now be conducting a question-and-answer session. Our first question comes from the line of Quinn Bolton of Needham and Company. Please proceed with your question.
Quinn Bolton, Analyst
Hey guys, congratulations on the nice revenue performance in a challenging environment. I guess I wanted to start off with recent commerce department actions last Monday, where they're changing some of the export license requirements for military use and military end users in China. Wondering if that's had any impact, if you've been able to take a look at those new regulations and what that might mean for the business?
Jeff Andreson, CEO
I had a feeling this might come up given some of the headlines in the last few days. But in general, we don't have to provide the license, so that would come from our customers. I would say, we haven't seen any effect of this. We're keeping a close eye on it. Many, many years ago, licenses were required for virtually everything shipped into China from the semiconductor industry. And getting the license takes some time, but we haven't really gotten a good feel on whether there's going to be any limitations there. So, unfortunately, it's probably better asked of one of our OEM customers as they're the ones that will actually do the licensing.
Quinn Bolton, Analyst
Understood, I asked because it's been a topic over the last week…
Jeff Andreson, CEO
Yeah.
Quinn Bolton, Analyst
Moving onto the business, you guys obviously had a big revenue ramp over the last few quarters. Inventory is sort of followed. Just kind of wondering how you're thinking about inventory as you come into the June quarter? And is the higher inventory balance sort of reflective of what you think the second half may hold, or is there anything we can read as how you're thinking about the second half of the year, given that higher inventory balance?
Jeff Andreson, CEO
What I would tell you is that the demand environment is still very, very strong. We opted to not overly constrain inbound inventory in light of some of the challenges. As we get through those challenges, we want to make sure we have the inventory and can turn it as well. Our inventory turn stayed pretty healthy. I would say as we look at next quarter, it’ll probably likely be a pretty flat number, maybe down slightly, depending on where we come out in the range. And so we’ll manage it down to some levels, but we still see a relatively strong demand environment as we go into Q3 as well.
Quinn Bolton, Analyst
And then just last question from me. Obviously, during periods of uncertainty and downturns, I think some of the suppliers, some of your customers may look to tighten the supplier base. I was wondering if you're seeing any increased activity from your customers to try to tighten up the supplier base, especially given some of the COVID driven supply effects that we've seen around the world?
Jeff Andreson, CEO
By tighten, you mean reduce, I think?
Quinn Bolton, Analyst
Yes, reduce the number of suppliers, kind of consolidate to the larger folks like yourself?
Jeff Andreson, CEO
Yes, I would tell you that I actually think it’s kind of miraculous what the industry has been able to accomplish, given the global nature of this and the global supply chain. So, I'm not seeing that happen. I would tell you that as the industry gets bigger and bigger, some of the smaller players become more challenged to ramp and things like that. So, I'd say it's more of a function of the ability to grow than it is to kind of reconfigure the entire global supply chain. I mean, we just, most companies that reported have done pretty well in addressing the ramp in the situation.
Operator, Operator
Thank you. Our next question comes from Sidney Ho with Deutsche Bank. Please proceed with your question.
Sidney Ho, Analyst
The first one is, maybe can you help us quantify what revenue would have been for Q1 and Q2, if there were no supply constraints?
Jeff Andreson, CEO
I would say when we look at Q1, I think certainly we would have probably been towards the upper end of the revenue range that we have provided had we not run into the headwinds beginning with China's supply base and then ending with a couple of weeks of shutdowns of two of our large operations. But I think as you look at Q2, I think the underlying demand is higher than the revenue guidance you’ll probably hear from the industry mainly because everyone in the industry has had to adjust, reflow, and realign with our customers. And our customers have been obviously impacted too because of their spacing requirements for everybody out there. So everybody is working their factories over to adjust.
Sidney Ho, Analyst
Kind of related to that, based on your comments or your competitors’ comments, sounds like you have lost some market share in Q1, because parts can get out of Malaysia or whatnot. Would you be able to quantify that impact? And can you talk about your expectation when you think that you will regain those shares? Is this simply just when your factories open, you can start shipping, and you get those back?
Jeff Andreson, CEO
Well, I think there was a comment made by one of our competitors about market share gains. We know we haven't lost any share in gas delivery. They do have duplicate weldments, but we think that's fairly small. So I think the inference that it came from us is maybe not 100% correct as we don't 100% overlap with our product lines. I'd also just point out when you compare our year-over-year revenue growth that we talked about since a year ago, you can see that we're significantly outgrowing what the industry has seen and that's just the effect really largely due to the market share that we've put in gains last year that we won and some additional market share gains this year as well.
Sidney Ho, Analyst
Maybe my last question is, you have talked about these share gain opportunities in the past, and you have given us some progress today as well. Can you talk about what your revenue expectation of these opportunities in aggregate this year, maybe a range would be more appropriate now? And how do you rank order these opportunities for calendar 2020?
Larry Sparks, CFO
I think we said on the last call, Sidney, we weren't going to try and do the quarter-by-quarter scorecard. What I would tell you is that we're working on opportunities on the component side of our businesses in weldments and in precision machining. There is opportunity in gas distribution to some degree, and then obviously, with our chemical delivery, we're looking at expanding that geographically really around some of the success we may have in qualifying additional customers here in the U.S. and the initial impact that may start late in the year for the LDM outside of the U.S.
Operator, Operator
Thank you. Our next question comes from the line of Karl Ackerman with Cowen. Please proceed with your question.
Unidentified Analyst, Analyst
This is Sam on for Karl. With many other semi-cap companies reluctant to put out guidance near-term, what kind of visibility do you have for the next few months that gives you confidence in the guide? And I guess to say it in a different way, how do your different exposures play in the comparability here with your customers? And then I have a follow-up, please.
Jeff Andreson, CEO
I think as we look at where we're at today and what we can do operationally, I think we were comfortable that we could set a range. We've widened it quite a bit from what we typically do. It's nearly twice as wide. I'd say, you think of the top end of our recovery of our range as being able to come back online faster than we're anticipating. But right now, I think we're pretty comfortable with where our supply chain is and its recovery. Malaysia is a big challenge for us. And now that we've been approved to operate completely, now we're bringing all of our employees back on, they're putting the spacing protocols in place, and we should be back to kind of near pre-COVID capacity levels there. And so with that, I think we're comfortable with providing a range now. If something happens where a lot of places put other restrictions in, which doesn’t feel like it's going to happen, but we can't predict the future.
Unidentified Analyst, Analyst
And then we talked about gross margins a bit on the call already, but how should we be thinking about linearity through the rest of the year given how impressive your revenue ramp has been to date? I think we’re expecting them to trend positively through the rest of the year, of course. But how long could it possibly take through your labor cost structure to catch up with the demand you've seen and speaking beyond June here, COVID-19 not considered? Thank you.
Larry Sparks, CFO
Well, I think before what we said when we were projecting a growth from the kind of $189 million range to the midpoint of $227 million. We said that should contribute around 100 basis point improvement in margin. I think we're still confident that as we kind of execute to and as Jeff mentioned, sort of get back to more normal capacity and kind of flow through the factories, we would expect to see at least that and a lot of it then beyond that will depend on overall customer demand and the strength of that demand, and what kind of volume leverage we can see in addition to where we are in Q2. And also, there's some cost programs that we have, the timing of which may happen in Q3 or Q4, just depending upon how quickly we can get those done and then how much we're responding to kind of changing customer dynamics. So we expect to get at least 100 basis points back. And then as we mentioned before, as we increase the amount of higher mix of products in the weldment and precision machining areas, we will go beyond that and try to get closer down the road to our model.
Operator, Operator
Thank you. Our next question comes from Tom Diffely with D.A. Davidson. Please proceed with your question.
Tom Diffely, Analyst
So Larry, taking the margin one step further. When you get back from the $250 million to $260 million range, are you going to be back at the 17 plus minus margin as well similar to what it was a couple of years ago?
Larry Sparks, CFO
I would say as we get towards the end of this year and if we're at that revenue level, we'll probably still be slightly under that, but very close to that. I think a lot of it's going to depend on the mix of product that we have at that point. If we can continue to capture the share that we expect to in the weldment areas and precision machining, I think that's definitely in the range of where we expect to be.
Jeff Andreson, CEO
We’re driving to try and increase, obviously, the mix of our weldment and our precision machine. I think we've got a good initial wave of market share gains and we're working on others in that space. So that will be helpful as well. And as Larry said, as we kind of go through the year, we'll have our cost reduction programs be continuing to kick in.
Tom Diffely, Analyst
And then on the weldment subject, why was that a little weaker in the quarter? Was it at just a facility that was hit more than the rest?
Jeff Andreson, CEO
We have three main weldment facilities, with the largest located in Malaysia. Malaysia was closed for nearly three weeks before we were permitted to bring in around 30% of our production staff. We also have a weldment facility in Alameda County, which accounts for most of our operations, plus a smaller facility in Portland. When California shut down, we were closed for about a week until we were classified as an essential industry. It took time to restart operations and bring employees back, resulting in nearly two weeks of lost revenue. The Malaysian facility produces weldments primarily for our internal gas panels, with some sold externally. Its downtime affected both our operations, highlighting the importance of getting Malaysia operational again. They are making good progress, and it has only been a week since they were authorized to resume full operations, but they are ramping up capacity quickly.
Tom Diffely, Analyst
Yes, I know it can be a little tough to weld at home sometimes. And then finally, when you look at the social distancing inside the factories. Has that reduced your capacity, or do you have enough kind of empty sort of that?
Jeff Andreson, CEO
So, the answer is yes. It limits our capacity to some degree. I would say, as you look at us, our integration sites where the actual gas panels are all assembled, I think the spacing requirements are not as impactful there because of the space they have and the clean rooms and other areas where we're seeing a little more of an impact is really in the weldments in the machining and not necessarily out where you're doing machining on the CNCs. But there's clean room operations and there's final Q&A and things like that, where the space gets a little constrained. So we've created a few bottlenecks. We're trying to work around those in creative ways. And I think the operations team is doing a really good job to try and eke out all the capacities that they can. We certainly have enough capacity to do the range of revenue that we see for next quarter that we just guided into.
Operator, Operator
Thank you. Our next question comes from Mitch Steves with RBC Capital Markets. Please proceed with your question.
Mitch Steves, Analyst
The first one I had is just kind of on the demand side. So I think, first it's pretty good, you guys are guiding relatively flat as for Q-over-Q just given the environment that we're in. But how do we think about demand disruption or potential demand disruption, let's say 12 months from now? I guess, my question there is what gives you guys confidence that this kind of demand is going to continue? I realized that last year was a very cyclical down year. But going forward here, just given all the news we’re seeing what type of visibility you guys have in terms of orders that are giving you confidence over the next call it 12 months or so?
Jeff Andreson, CEO
We don't receive input from our customers looking 12 months ahead. However, they indicate that demand remains strong, largely due to the robust performance in foundry and logic during the first half. We anticipate some recovery in the memory sector, though predicting global economic trends is challenging at this time. I don't want to be the first to speculate on this, but any impact could have a ripple effect on the semiconductor industry. Nevertheless, several significant technological advancements are taking place, such as the transition to 5G. The shift to remote work has also provided some benefits despite the challenges. While we may eventually see some impacts in smartphones, the PC market is currently very strong. I wish I could foresee the future. We manage the company with a balance of aggressive and cautious strategies, ready to respond swiftly if necessary. In the last cycle, we adapted our infrastructure quickly when required. We'll continue to monitor the situation and respond to demand changes. For now, our customers signal that demand is still quite strong.
Mitch Steves, Analyst
And then just a couple of follow-ups, so just the other one I had in mind was just the idea that the U.S. is probably going to incentivize. I wouldn't be surprised if they incentivize semiconductor companies to bring manufacturers to the United States to kind of start building on fabs here. Would that benefit you guys or does it not really matter if the fab is built or new fabs are built versus, I guess, filling in old fabs? That makes sense. So if you build the new one is that beneficial to you guys versus trying to fill an old one? And then the very last one is just if ASML is going to be a 10% plus or do you think this year, and I know it’s close to last year just curious if you had a thought on that?
Jeff Andreson, CEO
It was improving last year despite low revenue. This year, other customers, given the size of their business, are likely to outpace ASML's growth. The large numbers mean they won't be able to grow quickly enough to reach 10%. Regarding whether building fabs in the U.S. benefits us, I'd say we're mostly neutral on the location unless there are implications related to the Department of Commerce licensing, which could lead to more Greenfield sites that would be slightly advantageous to us. We prefer Greenfield fabs because they are filled entirely with tools. When there's a shift in technology nodes, they tend to equip parts of the fab and then fill in as needed for the new technology. If that occurs, it would likely result in a net benefit.
Operator, Operator
Thank you. Our next question comes from Patrick Ho with Stifel. Please proceed with your question.
Patrick Ho, Analyst
Maybe for you, Jeff or Larry, in terms of the gross margin impact specifically with COVID-19. You said 100 basis points, and based on at least the prepared remarks, it sounds like a lot of it in the March quarter was on manufacturing utilization, the shutdowns and things of that nature. As you look at the June quarter and that 100 basis point impact, is that still the biggest variable for that 100 point basis point of impact, or are logistics and supply chain maybe bigger impacts in the June quarter as manufacturing kind of gets back to more normal operations?
Larry Sparks, CFO
Yes, Patrick, I think you addressed the question well. As we look at logistics, we are experiencing significantly higher freight costs that will affect most of the quarter, rather than being limited to the end of last quarter. In addition, as we adapt to social distancing and gradually ramp up our factories, we've had to modify work schedules and shift coverage. This means more employees are on the late shifts, which come with shift premiums among other considerations. Consequently, we can expect a slight overall increase in hourly wages as we work towards our production goals. Regarding the direct shutdowns, as Jeff mentioned, we ended March with a considerable number of factories either shut down or operating under significant restrictions due to shelter-in-place orders while determining our next steps. As Jeff stated, we now have a clearer plan. We will incur some costs related to cleaning and additional equipment for our workforce. We're also exploring adjustments in operations within the factory to enhance output and increase the distance between workstations. There's a considerable amount of effort being put into how we organize our labor force, including their schedules and placements. Although the approach may differ, the overall impact on margins is expected to resemble what we experienced in Q1.
Patrick Ho, Analyst
And Jeff, maybe as my follow-up question, it's evident obviously in your year-to-year growth in revenues about the share gains you've talked about in weldments and precision machining. Given that the focus of yourself and your largest customers are right now on the current situation and just making sure that customers get their products. Have you seen any changes in the timing of the evaluations and the qualifications for the share gains? And what I'm looking at that is, does it just push out potentially into 2021 as everyone is focused on the near-term environment? Do you believe these evaluations are still on track?
Jeff Andreson, CEO
So, I'd probably split this in two pieces, Patrick. I mean, I think that if there is a continuity of supply and you have to go get something qualified, I think those are going really quickly now. So, if you need to change vendors or something, you would generally work with your customers to ensure that they qualify with us. New product qualifications, I have not seen them slow. I think, as I kind of talked about the operational aspects of how the industry has handled this, I think they're largely maintaining their R&D and development. So we have a couple of obviously Liquid Delivery Module betas, and we hope to have by the end of the year the next generation gas panel data out there. I think those are still progressing quite well in light of all of this as well.
Operator, Operator
Thank you. Our next question comes from Craig Ellis with B. Riley FBR. Please proceed with your question.
Carlin Lynch, Analyst
This is Carlin Lynch on for Craig. Just wanted to jump on the gross margin point and ask the follow-up. Looking beyond kind of the COVID-19 impact, you talked last quarter about the impact from the plastics division. I was wondering how you guys were thinking about that business through the year and what kind of impact it has as revenues ramp? And then I had a quick follow-up.
Larry Sparks, CFO
Well, the plastics business, certain aspects of it are growing, and certain aspects are not scaling right now with that. We still have some activity that we're doing there. But we do expect that, that margin will start to improve, but it's probably going to be a second half effect.
Carlin Lynch, Analyst
And then just in the OpEx point. You mentioned that OpEx is going to come down slightly in the second quarter, but given all the R&D projects and new customer qualifications. What are the kind of puts and takes there through the year? Just any color there would be great? Thanks.
Larry Sparks, CFO
Well, I think we continue to prioritize execution on those programs. I mean, we've been doing that for a couple of quarters now, especially in the liquid delivery module and the development of the kind of next generation gas panel efforts. I think that we have no intention to kind of shortchange that activity. We will probably adjust the G&A and other spending kind of around making sure that the R&D is preserved. And I think overall we're trying to hold the spending levels kind of to that lower level $14 million range that we communicated last time. So I think no change in strategy. If we have to prioritize where to make those investments, we'll do it in R&D and adjust on G&A and sales if we have to.
Jeff Andreson, CEO
Yes, I would add that we're kind of when I say OpEx light, I mean, we generally don't add OpEx until we have to. A perfect example of this year is we have to become SOX compliant by the end of the year and starting next year. So that costs money that's funded in there. And then the rest of our growth this year is largely around kind of what we acquired last year in the development of new R&D programs. When we do the acquisition of the flow control unit, we get the full impact of it this year. So that's another reason why it's up a bit. Having said that, if we see any softening in the second half, we have a few levers to pull on that as well.
Operator, Operator
Thank you. We have no additional questions at this time. So, I'd like to pass the floor back over to Mr. Andreson for any additional concluding comments.
Jeff Andreson, CEO
Thank you for joining us on our call this quarter. I'd like to thank our employees, suppliers, and customers for their support as we manage through these challenging times. We look forward to updating you again on our next earnings call in early August. In the meantime, we are scheduled to participate in the virtual tech conferences hosted by Cowen in late May and Stifel in early June, which will be available via webcast on our IR website. Operator, that concludes our call.
Operator, Operator
Thank you. Ladies and gentlemen, once again this does include today's teleconference. We thank you for your participation, and you may disconnect your lines at this time.