10-Q

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

---

FORM 10-Q

(Mark One)

x	QUARTERLY REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
	For the quarterly period ended June 30, 2020

or

¨	TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d)OF THE SECURITIES EXCHANGE ACT OF 1934
	For the transition period from                                  <br> to

---

Commission file number: 0-31641

SCI ENGINEERED MATERIALS, INC.

(Exact name of registrant as specified in its charter)

Ohio	31-1210318
(State or other jurisdiction of	(I.R.S. Employer
incorporation or organization)	Identification No.)

2839 Charter Street, Columbus, Ohio 43228

(Address of principal executive offices) (Zip Code)

(614) 486-0261

(Registrant’s telephone number, including area code)

Not Applicable

(Former name, former address and former fiscal year, if changed since last report)

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes x No ¨

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (section 232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files). Yes x No ¨

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company or an emerging growth company. See the definitions of “large accelerated filer”, “accelerated filer” “smaller reporting company” and “emerging growth company” in Rule 12b-2 of the Exchange Act.

Large accelerated filer ¨	Accelerated filer ¨	Non-accelerated filer x	Smaller reporting company x

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ¨

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes ¨ No x

4,421,604 shares of Common Stock, without par value, were outstanding at August 5, 2020.

Securities registered pursuant to Section 12(b) of the Act:

Title of each class	Trading Symbol(s)	Name of each exchange on which registered
Common stock, without par value	SCIA	OTCQB

FORM 10-Q

---

SCI ENGINEERED MATERIALS, INC.

Table of Contents

Page No.

PART I.        FINANCIAL INFORMATION
	Item 1.	Financial<br> Statements
		Balance<br> Sheets as of June 30, 2020 (unaudited) and December 31, 2019	3
		Statements<br> of Operations for the Three and Six Months Ended June 30, 2020 and 2019 (unaudited)	5
		Statements<br> of Shareholder’s Equity for the Three and Six Months Ended June 30, 2020 and 2019 (unaudited)	6
		Statements<br> of Cash Flows for the Six Months Ended June 30, 2020 and 2019 (unaudited)	7
		Notes<br> to Financial Statements (unaudited)	8
	Item<br> 2.	Management's<br> Discussion and Analysis of Financial Condition and Results of Operations	15
	Item<br> 3.	Quantitative<br> and Qualitative Disclosures About Market Risk	N/A
	Item<br> 4.	Controls<br> and Procedures	20
PART II.        OTHER INFORMATION
	Item<br> 1.	Legal<br> Proceedings	N/A
	Item<br> 1A.	Risk<br> Factors	N/A
	Item<br> 2.	Unregistered<br> Sales of Equity Securities and Use of Proceeds	N/A
	Item<br> 3.	Defaults<br> Upon Senior Securities	N/A
	Item<br> 4.	Mine<br> Safety Disclosures	N/A
	Item<br> 5.	Other<br> Information	N/A
	Item<br> 6.	Exhibits	23
	Signatures		24

2

PART I.  FINANCIALINFORMATION

ITEM 1. FINANCIAL STATEMENTS

SCI ENGINEEREDMATERIALS, INC.

BALANCE SHEETS

ASSETS

			December 31,
			2019
Current Assets
Cash	1,924,807		$	1,828,397
Accounts receivable, less allowance for doubtful accounts of 15,000	388,338			348,524
Inventories	871,024			2,749,038
Prepaid expenses	156,033			105,464
Total current assets	3,340,202			5,031,423
Property and Equipment, at cost
Machinery and equipment	8,240,616			8,258,578
Furniture and fixtures	137,680			137,680
Leasehold improvements	592,899			592,899
Construction in progress	140,900			-
	9,112,095			8,989,157
Less accumulated depreciation	(7,217,050	)		(7,036,955	)
	1,895,045			1,952,202
Right of use asset, net	396,686			434,492
Other assets	91,722			86,958
Total other assets	488,408			521,450
TOTAL ASSETS	5,723,655		$	7,505,075

All values are in US Dollars.

The accompanying notes are an integral part of these financial statements.

3

SCI ENGINEERED MATERIALS, INC.

BALANCE SHEETS

LIABILITIES AND SHAREHOLDERS' EQUITY

			December 31,
			2019
Current Liabilities
Finance lease obligations, current portion	101,115		$	98,524
Notes payable, current portion	143,976			-
Operating lease obligations, current portion	84,778			80,669
Accounts payable	179,614			254,004
Customer deposits	337,520			2,408,837
Accrued compensation	76,204			116,686
Accrued expenses and other	107,734			80,375
Total current liabilities	1,030,941			3,039,095
Finance lease obligations, net of current portion	74,100			125,311
Notes payable, net of current portion	181,324			-
Operating lease obligations, net of current portion	348,268			391,833
Total liabilities	1,634,633			3,556,239
Shareholders' Equity
Convertible preferred stock, Series B, 10% cumulative, nonvoting, no par value,<br> 10 stated value, optional  redemption at 103%; optional shareholder conversion 2 shares for 1; 24,152 shares issued and<br> outstanding	502,362			514,438
Common stock, no par value, authorized 15,000,000 shares; 4,421,604 and<br> 4,370,519 shares issued and outstanding, respectively	10,470,675			10,410,677
Additional paid-in capital	2,256,213			2,265,925
Accumulated deficit	(9,140,228	)		(9,242,204	)
	4,089,022			3,948,836
TOTAL LIABILITIES AND SHAREHOLDERS' EQUITY	5,723,655		$	7,505,075

All values are in US Dollars.

The accompanying notes are an integral part of these financial statements.

4

SCI ENGINEERED MATERIALS, INC.

STATEMENTS OF OPERATIONS

THREE MONTHS AND SIX MONTHS ENDED JUNE 30, 2020 AND 2019

(UNAUDITED)

	THREE MONTHS ENDED JUNE 30,				SIX MONTHS ENDED JUNE 30,
	2020		2019		2020		2019
Revenue	$	2,606,587	$	2,741,948	$	6,045,382	$	6,756,986
Cost of revenue		2,168,803		2,047,279		5,098,260		5,366,015
Gross profit		437,784		694,669		947,122		1,390,971
General and administrative expense		272,216		349,636		555,381		709,436
Research and development expense		90,421		94,600		177,325		203,469
Marketing and sales expense		47,387		69,346		99,171		137,965
Income from operations		27,760		181,087		115,245		340,101
Interest		7,300		14,669		11,369		13,481
Income before provision for income taxes		20,460		166,418		103,876		326,620
Income taxes		-		-		1,900		4,860
Net income		20,460		166,418		101,976		321,760
Dividends on preferred stock		6,038		6,038		12,076		12,076
INCOME APPLICABLE TO COMMON SHARES	$	14,422	$	160,380	$	89,900	$	309,684
Earnings per share - basic and diluted (Note 7)
Income per common share
Basic	$	0.00	$	0.04	$	0.02	$	0.07
Diluted	$	0.00	$	0.04	$	0.02	$	0.07
Weighted average shares outstanding
Basic		4,411,714		4,321,387		4,398,856		4,308,504
Diluted		4,418,325		4,363,276		4,406,478		4,352,297

The accompanying notes are an integral part of these financial statements.

5

SCI ENGINEEREDMATERIALS, INC.

STATEMENTS OFSHAREHOLDERS' EQUITY

THREEAND SIX MONTHS ENDED JUNE 30, 2020 AND 2019

	Convertible					Additional
	Preferred Stock,			Common		Paid-In			Accumulated
	Series B			Stock		Capital			Deficit			Total
Balance 12/31/2019	$	514,438		$	10,410,677	$	2,265,925		$	(9,242,204	)	$	3,948,836
Accretion of cumulative dividends		6,038			-		(6,038	)		-			-
Stock based compensation expense (Note 4)		-			-		1,182			-			1,182
Common stock issued (Note 4)		-			29,998		-			-			29,998
Net income		-			-		-			81,516			81,516
Balance 3/31/2020	$	520,476		$	10,440,675	$	2,261,069		$	(9,160,688	)	$	4,061,532
Accretion of cumulative dividends		6,038			-		(6,038	)		-			-
Payment of cumulative dividends (Note 5)		(24,152	)		-		-			-			(24,152	)
Stock based compensation expense (Note 4)		-			-		1,182			-			1,182
Common stock issued (Note 4)		-			30,000		-			-			30,000
Net income		-			-		-			20,460			20,460
Balance 6/30/2020	$	502,362		$	10,470,675	$	2,256,213		$	(9,140,228	)	$	4,089,022
Balance 12/31/2018	$	514,438		$	10,275,733	$	2,280,060		$	(9,547,555	)	$	3,522,676
Accretion of cumulative dividends		6,038			-		(6,038	)		-			-
Stock based compensation expense (Note 4)		-			-		4,158			-			4,158
Proceeds from exercise of stock options (Note 4)		-			14,952		-			-			14,952
Common stock issued (Note 4)		-			30,002		-			-			30,002
Net income		-			-		-			155,342			155,342
Balance 3/31/2019	$	520,476		$	10,320,687	$	2,278,180		$	(9,392,213	)	$	3,727,130
Accretion of cumulative dividends		6,038			-		(6,038	)		-			-
Payment of cumulative dividends (Note 5)		(24,152	)		-		-			-			(24,152	)
Stock based compensation expense (Note 4)		-			-		1,379			-			1,379
Common stock issued (Note 4)		-			29,997		-			-			29,997
Net income		-			-		-			166,418			166,418
Balance 6/30/2019	$	502,362		$	10,350,684	$	2,273,521		$	(9,225,795	)	$	3,900,772

The accompanying notes are an integral part of these financial statements.

6

SCI ENGINEERED MATERIALS, INC.

STATEMENTS OF CASH FLOWS

SIX MONTHS ENDED JUNE 30, 2020 AND 2019

(UNAUDITED)

	2020			2019
CASH FLOWS FROM OPERATING ACTIVITIES
Net income	$	101,976		$	321,760
Adjustments to reconcile net income to net cash provided by operating activities:
Depreciation and accretion		226,956			219,302
Amortization		1,724			36,261
Stock based compensation		62,362			65,536
(Gain) loss on disposal of equipment		(3,063	)		4,226
Inventory reserve		33,629			600
Changes in operating assets and liabilities:
Accounts receivable		(39,814	)		126,685
Note receivable		-			(7,477	)
Inventories		1,844,385			(809,964	)
Prepaid expenses		(50,569	)		558,476
Right of use asset		37,806			(505,700	)
Other assets		(6,488	)		(8,757	)
Accounts payable		(74,390	)		5,623
Operating lease obligations		(39,456	)		509,756
Accrued expenses and customer deposits		(2,086,240	)		(223,047	)
Net cash provided by operating activities		8,818			293,280
CASH FLOWS FROM INVESTING ACTIVITIES
Proceeds on sale of equipment		3,063			-
Purchases of property and equipment		(167,999	)		(212,195	)
Net cash used in investing activities		(164,936	)		(212,195	)
CASH FLOWS FROM FINANCING ACTIVITIES
Proceeds from exercise of common stock options		-			14,952
Payment of cumulative dividends on preferred stock		(24,152	)		(24,152	)
Proceeds from SBA Paycheck Protection Program		325,300			-
Principal payments on finance lease obligations and notes payable		(48,620	)		(76,391	)
Net cash provided by (used in) financing activities		252,528			(85,591	)
NET INCREASE (DECREASE) IN CASH		96,410			(4,506	)
CASH -<br> Beginning of period		1,828,397			1,802,839
CASH -<br> End of period	$	1,924,807		$	1,798,333
SUPPLEMENTAL DISCLOSURES OF CASH FLOW INFORMATION
Cash paid during the period for:
Interest	$	5,826		$	5,939
Income taxes		1,900			4,860
SUPPLEMENTAL DISCLOSURES OF NONCASH INVESTING AND FINANCING ACTIVITIES
Increase in asset retirement obligation		1,800			1,271

The accompanying notes are an integral part of these financial statements.

7

SCI ENGINEEREDMATERIALS, INC

NOTES TOFINANCIAL STATEMENTS

Note 1.	Business Organization and Purpose

---

SCI Engineered Materials, Inc. (“SCI”, or the “Company”), an Ohio corporation, was incorporated in 1987. The Company operates in one segment as a global supplier and manufacturer of advanced materials for Physical Vapor Deposition (“PVD”) Thin Film Applications. The Company is focused on specific markets within the PVD industry (Photonics, Thin Film Solar, Glass and Transparent Electronics). Substantially all of the Company’s revenues are generated from customers with multi-national operations. The Company develops innovative customized solutions enabling commercial success through collaboration with end users and Original Equipment Manufacturers.

Note 2.	Summary of Significant Accounting Policies

---

Basis of Presentation - The accompanying unaudited financial statements have been prepared in accordance with U.S. generally accepted accounting principles for interim financial information and with instructions to Form 10-Q and Article 10 of Regulation S-X. Accordingly, they do not include all of the information and footnotes required by U.S. generally accepted accounting principles for complete financial statements. In the opinion of management, all adjustments considered necessary for fair presentation of the results of operations for the periods presented have been included. The financial statements should be read in conjunction with the audited financial statements and the notes thereto for the year ended December 31, 2019. Interim results are not necessarily indicative of results for the full year.

Use of Estimates - The preparation of financial statements in conformity with U.S. generally accepted accounting principles requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities at the date of the financial statements and the reported amounts of revenues and expenses during the reporting period. Actual results could differ from those estimates.

Revenue Recognition - The Company enters into contracts with its customers that generally represent purchase orders specifying general terms and conditions, order quantities and per unit product prices. The Company has determined that each unit of product purchased represents a separate performance obligation. The Company satisfies its performance obligations and recognizes revenue at a point in time when control of a unit of product is transferred to the customer. Revenue is measured as the amount of consideration the Company expects to receive in exchange for transferring products. For the majority of product sales, transfer of control occurs when the products are shipped from the Company's manufacturing facility to the customer. The cost of delivering products to the Company's customers is recorded as a component of cost of products sold. Those costs may include the amounts paid to a third party to deliver the products. Any freight costs billed to and paid by a customer are included in revenue.

The Company considers collectability of amounts due under a contract to be probable upon inception of a sale based on an evaluation of the credit worthiness of each customer. The Company sells its products typically under agreements with payment terms less than 45 days. The Company does not typically include extended payment terms or significant financing components in contracts with customers. The majority of the Company’s contracts have an obligation to transfer products within one year. Thus, the Company elects to use the practical expedient where incremental cost of obtaining a contract, such as commissions, is expensed when incurred because the amortization period for those costs is one year or less. The Company treats shipping and handling activities that occur after control of the product transfers as fulfillment activities, and therefore, does not account for shipping and handling costs as a separate performance obligation. Customer deposits are funds received in advance from customers and are recognized as revenue when the Company has transferred control of product to the customer. Product revenues are recognized upon shipment of goods as the customer has assumed the significant risks and rewards of ownership and the Company is entitled to payment at this point. Service revenues are recognized upon completion as the customer cannot realize the benefit of the service until fully completed.

8

SCI ENGINEEREDMATERIALS, INC

NOTES TOFINANCIAL STATEMENTS

Note 2.	Summary of Significant Accounting Policies (continued)

During the three months ended June 30, 2020 and 2019, revenue from the photonics market was approximately 96% and 92% of total revenue, respectively. During the six months ended June 30, 2020 and 2019, revenue from the photonics market was approximately 98% and 95% of total revenue, respectively. The balance of the revenue in these periods was almost entirely from the thin film solar market. The top two customers represented approximately 87% and 76% of total revenue for the six months ended June 30, 2020 and 2019, respectively. International shipments resulted in 4% and 14% of total revenue for the first six months of 2020 and 2019, respectively.

Note 3.	Recent Accounting Pronouncements

In June 2016, the FASB issued ASU No. 2016-13 “Credit Losses - Measurement of Credit Losses on Financial Instruments.” ASU No. 2016-13 significantly changes how entities will measure credit losses for most financial assets, including accounts and notes receivables, by replacing today’s “incurred loss” approach with an “expected loss” model under which allowances will be recognized based on expected rather than incurred losses. ASU No. 2016-13 will become effective for us in the first quarter of 2023. We are evaluating the impact that the adoption of this update will have on our financial statements.

Note 4.	Common Stock and Stock Options

---

Stock Based Compensation cost for all stock awards is based on the grant date fair value and recognized over the required service (vesting) period. Non cash stock based compensation expense was $31,182 and $31,376 for the three months ended June 30, 2020 and 2019, respectively. Non cash stock based compensation expense was $62,362 and $65,536 for the six months ended June 30, 2020 and 2019, respectively. Unrecognized compensation expense was $13,398 as of June 30, 2020 and will be recognized through 2023. There was no tax benefit recorded for this compensation cost as the expense primarily relates to incentive stock options that do not qualify for a tax deduction until, and only if, a qualifying disposition occurs.

The non-employee Board members received compensation of 51,085 and 18,080 aggregate shares of common stock of the Company during the six months ended June 30, 2020 and 2019, respectively. The stock had an aggregate value of $59,998 and $59,999 for the six months ended June 30, 2020 and 2019, respectively, and was recorded as non-cash stock compensation expense in the financial statements.

9

SCI ENGINEEREDMATERIALS, INC

NOTES TO FINANCIAL STATEMENTS

Note 4.	Common Stock and Stock Options (continued)

The cumulative status of options granted and outstanding at June 30, 2020, and December 31, 2019, as well as options which became exercisable in connection with the Company’s stock option plans is summarized as follows:

Employee Stock Options

				Weighted
				Average
	Stock Options			Exercise Price
Outstanding at January 1, 2019		396,941		$	4.41
Exercised		(31,788	)		0.84
Expired		(271,500	)		6.00
Forfeited		(17,616	)		1.00
Outstanding at December 31, 2019		76,037		$	1.03
Outstanding at June 30, 2020		76,037		$	1.03
Options exercisable at December 31, 2019		48,265		$	0.90
Options exercisable at June 30, 2020		55,208		$	0.94

Exercise prices for options ranged from $0.84 to $1.25 at June 30, 2020. The weighted average option price for all options outstanding at June 30, 2020, was $1.03 with a weighted average remaining contractual life of 6.0 years. There were no non-employee director stock options outstanding during 2020 and 2019.

---

Note 5.	Preferred Stock

---

Dividends on the Series B preferred stock accrue at 10% annually on the outstanding shares. Dividends on the Series B preferred stock were $6,038 for the three months ended June 30, 2020 and 2019, and $12,076 for the six months ended June 30, 2020 and 2019. The Company had accrued dividends on Series B preferred stock of $253,596 at June 30, 2020, and $265,672 at December 31, 2019. These amounts are included in Convertible preferred stock, Series B, on the balance sheet at June 30, 2020, and December 31, 2019. During June 2020, a dividend payment of $24,152 was made to preferred shareholders of record as of December 31, 2019. Also, during 2019, a dividend payment of $24,152 was made to preferred shareholders of record as of December 31, 2018.

Note 6.	Inventories
Inventories consisted of the following:	June 30,			December 31,
---	---	---	---	---	---	---
	2020			2019
	(unaudited)
Raw materials	$	283,062		$	883,767
Work-in-process		574,943			1,802,092
Finished goods		68,645			85,176
Inventory reserve		(55,626	)		(21,997	)
	$	871,024		$	2,749,038

10

SCI ENGINEEREDMATERIALS, INC

NOTES TOFINANCIAL STATEMENTS

---

Note 7.	Earnings Per Share

---

Basic income per share is calculated as income applicable to common shareholders divided by the weighted average of common shares outstanding. Diluted earnings per share is calculated as diluted income applicable to common shareholders divided by the diluted weighted average number of common shares. Diluted weighted average number of common shares gives effect to all dilutive potential common shares outstanding during the period using the treasury stock method and convertible preferred stock using the if-converted method. Diluted earnings per share exclude all diluted potential shares if their effect is anti-dilutive. All convertible preferred stock and common stock options listed in Note 4 that were out-of-the-money or anti-dilutive were excluded from diluted earnings per share. The following is provided to reconcile the earnings per share calculations:

	Three months ended June 30,				Six months ended June 30,
	2020		2019		2020		2019
Income applicable to common shares	$	14,422	$	160,380	$	89,900	$	309,684
Weighted average common shares outstanding - basic		4,411,714		4,321,387		4,398,856		4,308,504
Effect of dilution		6,611		41,889		7,622		43,793
Weighted average shares outstanding - diluted		4,418,325		4,363,276		4,406,478		4,352,297
Note 8.	Notes Payable
---	---

---

On April 17, 2020 we entered into an unsecured promissory note under the Paycheck Protection Program (the “PPP”), with a principal amount of $325,300. The PPP was established under the recently enacted Coronavirus Aid, Relief, and Economic Security Act (the “CARES Act”) and is administered by the U.S. Small Business Administration (the “SBA”). The term of the PPP loan is two years. The interest rate on this loan is 1.0% per annum, which shall be deferred for the first six months of the term of the loan. After the initial six-month deferral period, the loan requires monthly payments of principal and interest until maturity with respect to any portion of the PPP loan which is not forgiven as described below. The Company is permitted to prepay or partially prepay the PPP loan at any time with no prepayment penalties. Under the terms of the CARES Act, PPP loan recipients can apply for, and be granted, forgiveness for all or a portion of loans granted under the PPP. Such forgiveness will be determined, subject to limitations and ongoing rulemaking by the SBA, based on the use of loan proceeds for payroll costs and mortgage interest, rent or utility costs and the maintenance of employee and compensation levels. While there is no assurance the Company will obtain forgiveness of the PPP loan in whole or in part, it expects most (if not all) of this loan to be forgiven by the SBA.

The Company renewed its line of credit with Huntington National Bank for $1 million during 2019. The line of credit bears interest at 0.5 percentage points over the Prime Commercial Rate with an expiration date of October 5, 2020. At June 30, 2020, no amounts were drawn on the line of credit.

11

SCI ENGINEEREDMATERIALS, INC

NOTES TOFINANCIAL STATEMENTS

Note 8.	Notes Payable (continued)

Notes payable at June 30, 2020 is included in the accompanying balance sheets as follows:

	2020
U.S. SBA Paycheck Protection Program	$	325,300
Less current portion		143,976
Notes payable, net of current portion	$	181,324

Annual maturities of notes payable:

2020	$	35,904
2021		216,685
2022		72,711
Total	$	325,300
Note 9.	Income Taxes
---	---

Following is the income tax expense for the three and six months ended June 30:

	Three months ended				Six months ended
	June 30,				June 30,
	2020		2019		2020		2019
Federal - deferred	$	-	$	-	$	-	$	-
State and local		-		-		1,900		4,860
	$	-	$	-	$	1,900	$	4,860

Deferred tax assets and liabilities result from temporary differences in the recognition of income and expense for tax and financial reporting purposes. A full valuation allowance has been recorded against the realization of the net deferred tax assets at June 30, 2020 and December 31, 2019. The Company has net operating loss carryforwards available for federal and state tax purposes of approximately $3,900,000 which expire in varying amounts through 2039.

12

SCI ENGINEEREDMATERIALS, INC

NOTES TOFINANCIAL STATEMENTS

Note 10.	Operating Lease

The Company entered into an operating lease with a third party on March 18, 2014 for its headquarters in Columbus, Ohio. The terms of the lease include monthly payments ranging from $9,000 to $9,700 with a maturity date of November 30, 2024. The Company has the option to extend the lease period for an additional five years beyond the original expiration date. There are no restrictions or covenants associated with the lease. The lease costs were approximately $53,900 and $52,300 during the six months ended June 30, 2020 and 2019, respectively.

The following is a maturity analysis, by year, of the annual undiscounted cash flows of the operating lease liabilities as of June 30, 2020:

2020	$	54,196
2021		110,364
2022		112,611
2023		114,857
2024		102,550
Total minimum lease payments	$	494,578
Operating cash flows from operating leases	112,272
---	---	---
Weighted average remaining lease term – operating leases	4.4 years
Weighted average discount rate – operating leases	5.5	%

---

Note 11.	Finance Lease

---

The Company leases certain equipment under finance leases. Future minimum lease payments, by year, with the present value of such payments, as of June 30, 2020, are shown in the following table.

2020	$	53,903
2021		91,398
2022		21,609
2023		18,129
Total minimum lease payments		185,039
Less amount representing interest		9,824
Present value of minimum lease payments		175,215
Less current portion		101,115
Finance lease obligations, net of current portion	$	74,100

The equipment under finance lease at June 30, 2020, and December 31, 2019, is included in the accompanying balance sheets as follows:

---

	June 30, 2020		Dec. 31, 2019
Machinery and equipment	$	438,316	$	438,316
Less accumulated depreciation and amortization		120,221		98,305
Net book value	$	318,095	$	340,011

13

SCI ENGINEEREDMATERIALS, INC

NOTES TOFINANCIAL STATEMENTS

Note 11.	Finance Lease (continued)

These assets are amortized over a period of ten years using the straight-line method and amortization is included in depreciation expense.

The finance leases are structured such that ownership of the leased asset reverts to the Company at the end of the lease term. Accordingly, leased assets are depreciated using the Company's normal depreciation methods and lives. Ownership of certain assets were transferred to the Company in accordance with the terms of the leases and these assets have been excluded from the leased asset disclosure above.

Note 12.	Subsequent Event

During July 2020, the Company was approved to enter into a finance lease agreement in the amount of $306,972 for the rebuild of production equipment. This lease includes a term of 47 months and an interest rate of 4.2%.

14

Item 2.	Management's Discussion and Analysis of FinancialCondition and Results of Operations

The following discussion should be read in conjunction with the Financial Statements and Notes contained herein and with those in our Form 10-K for the year ended December 31, 2019.

Except for the historical information contained herein, the matters discussed in this Quarterly Report on Form 10-Q include certain forward-looking statements within the meaning of Section 27A of the Securities Act of 1933, as amended, and Section 21E of the Securities Exchange Act of 1934, as amended, which are intended to be covered by the safe harbors created thereby. Those statements include, but may not be limited to, all statements regarding our intent, belief, and expectations, such as statements concerning our future profitability and operating and growth strategy. Words such as “believe,” “anticipate,” “expect,” “will,” “may,” “should,” “intend,” “plan,” “estimate,” “predict,” “potential,” “continue,” “likely” and similar expressions are intended to identify forward-looking statements. Investors are cautioned that all forward-looking statements contained in this Quarterly Report on Form 10-Q and in other statements we make involve risks and uncertainties including, without limitation, the factors set forth under the caption “Risk Factors” included in our Annual Report on Form 10-K for the year ended December 31, 2019, and other factors detailed from time to time in our other filings with the Securities and Exchange Commission. One or more of these factors have affected, and in the future could affect our business and financial condition and could cause actual results to differ materially from plans and projections. Although we believe the assumptions underlying the forward-looking statements contained herein are reasonable, there can be no assurance that any of the forward-looking statements included in this Quarterly Report on Form 10-Q will prove to be accurate. In light of the significant uncertainties inherent in the forward-looking statements included herein, the inclusion of such information should not be regarded as a representation by us or any other person that our objectives and plans will be achieved.

Any forward-looking statement speaks only as of the date on which such statement is made, and we undertake no obligation to update any forward-looking statement or statements to reflect events or circumstances after the date on which such statements are made or reflect the occurrence of unanticipated events, unless necessary to prevent such statements from becoming misleading. New factors emerge from time to time and it is not possible for us to predict all factors, nor can it assess the impact of each such factor on the business or the extent to which any factor, or combination of factors, may cause actual results to differ materially from those contained in any forward-looking statements.

15

Item 2.	Management's Discussion and Analysis of FinancialCondition and Results of Operations (continued)

Executive Summary

In March 2020, the World Health Organization declared the coronavirus disease (COVID-19) a global pandemic and recommended containment and mitigation measures worldwide. To date, COVID-19 has surfaced in nearly all regions around the world and resulted in restrictions and shutdowns implemented by national, state, and local authorities. As a result of the pandemic, we are complying with executive orders issued in Ohio and U.S. Centers for Disease Control and Prevention guidelines regarding safety procedures. These procedures include, but are not limited to: social distancing, staggering start times, remote working, and teleconferencing versus in person meetings. We are maintaining regular contact, via phone and other electronic means, with our customers and suppliers. During the third quarter of 2020, and perhaps longer, we may operate below our normal production schedule due to uncertainty in our domestic and global market due to COVID-19. Thus, we expect revenue to be lower in the second half of 2020 compared to the first six months of this year.

On April 17, 2020 we entered into an unsecured promissory note under the Paycheck Protection Program (the “PPP”), with a principal amount of $325,300. The PPP was established under the recently enacted Coronavirus Aid, Relief, and Economic Security Act (the “CARES Act”) and is administered by the U.S. Small Business Administration (the “SBA”). This loan allowed us to pay our employees a full 40-hour week while production was below normal capacity. We anticipate that most (if not all) of this loan will be forgiven by the SBA following achievement of the loan requirements. We value all employees and wish to aid them through this difficult period. Management will continue to monitor our production and payroll needs going forward based on evolving circumstances.

Some employees worked remotely during most of the second quarter of 2020 and we do not believe it adversely affected our ability to maintain operations, including financial reporting. The Chief Financial Officer maintained constant contact with the accounting staff in addition to the Chief Executive Officer and the Operations Manager. We do not believe our disclosure controls and procedures were materially affected and there were no changes in controls. Communication was maintained with the Board of Directors as well. These employees returned to work in our office in June 2020.

Based on recent conversations with customers, we do not expect to experience any material impairments and do not anticipate any changes in accounting judgements. We are not aware of any material adverse impact on our supply chain and remain in contact with our suppliers.

We continue to face a period of uncertainty regarding the ongoing impact of the COVID-19 pandemic on both our projected customer demand and supply chain. During this challenging economic environment, we are focused on continuing to take the necessary steps to respond quickly to changes in our business and maintaining our financial flexibility in the face of the unprecedented and continuing impact of COVID-19, including (but not limited to): reviewing and monitoring planned capital expenditures, reviewing all operating expenses for opportunities to reduce spending, and aligning inventory to estimated revenue.

We continue to monitor the rapidly evolving situation related to COVID-19 including guidance from federal, state and local public health authorities and may take additional actions based on these recommendations. In these circumstances, there may be developments outside our control requiring us to adjust our operating plan. As such, given the dynamic nature of this situation, we cannot reasonably estimate the impacts of COVID-19 on our results of operations, cash flows and liquidity in the future.

16

Item 2.	Management's Discussion and Analysis of FinancialCondition and Results of Operations (continued)

For the three months ended June 30, 2020, we had total revenue of $2,606,587. This was a decrease of $135,361, or 4.9%, compared to the three months ended June 30, 2019. For the six months ended June 30, 2020, we had total revenue of $6,045,382. This was a decrease of $711,604, or 10.5%, compared to the six months ended June 30, 2019. Volume was lower in 2020 compared to 2019 as international shipments decreased by $677,216.

Gross profit was $437,784 for the three months ended June 30, 2020 compared to $694,669 for the same three months in 2019 and $947,122 and $1,390,971 for the six months ended June 30, 2020 and 2019, respectively, primarily due to lower revenue.

Operating expenses were $410,024, and $513,582 for the three months ended June 30, 2020 and 2019, respectively and $831,877 and $1,050,870 for the six months ended June 30, 2020 and 2019, respectively. The decrease was primarily due to additional expenses incurred during our management transition in the first half of 2019. Our former president and CEO retired in June 2019.

RESULTSOF OPERATIONS

Three and six months endedJune 30, 2020 (unaudited) compared to three and six months ended June 30, 2019 (unaudited):

Revenue

For the three months ended June 30, 2020, we had total revenue of $2,606,587. This was a decrease of $135,361, or 4.9%, compared to the three months ended June 30, 2019. For the six months ended June 30, 2020, we had total revenue of $6,045,382. This was a decrease of $711,604, or 10.5%, compared to the six months ended June 30, 2019. Volume was lower in 2020 compared to 2019 as international shipments decreased by $677,216.

Gross Profit

Gross profit was $437,784 for the three months ended June 30, 2020 compared to $694,669 for the same three months in 2019. This was a decrease of $256,885, or 37.0%. Gross profit as a percentage of revenue (gross margin) was 16.8% for the second quarter of 2020 compared to 25.3% for the same period in 2019. Gross profit was $947,122 for the six months ended June 30, 2020 compared to $1,390,971 for the first six months of 2019. This was a decrease of $443,849 or 31.9%. Gross margin was 15.7% for the first six months of 2020 compared to 20.6% for the same period in 2019. The decrease in gross profit and gross margin was primarily related to lower revenue previously mentioned as well as product mix.

General and AdministrativeExpense

General and administrative expense for the three months ended June 30, 2020 and 2019, was $272,216 and $349,636, respectively, a decrease of 22.1%. General and administrative expense for the six months ended June 30, 2020 and 2019, was $555,381 and $709,436, respectively, a decrease of 21.7%. This decrease was primarily related to lower compensation of approximately $58,000 during the second quarter of 2020 and $139,000 during the first six months of 2020. Higher compensation expense for the same periods in 2019 was related to our new President and CEO working closely with our former President and CEO during the first half of 2019.

17

Item 2.	Management's Discussion and Analysis of FinancialCondition and Results of Operations (continued)

Professional Fees

Included in total expense was $56,555 and $53,953 for professional fees for the three months ended June 30, 2020 and 2019, respectively and $120,137 and $120,454 for the six months ended June 30, 2020 and 2019, respectively. These continued expenses were primarily related to SEC compliance costs for legal, accounting and stockholder relations fees.

Research and Development Expense

Research and development expense for the three months ended June 30, 2020, was $90,421 compared to $94,600 for the same period in 2019, a decrease of 4.4%. Research and development expense for the six months ended June 30, 2020, was $177,325 compared to $203,469 for the same period in 2019, a decrease of 12.8%. This decrease was primarily related to lower compensation expense due to staffing levels in the first half of 2019. We continue to invest in developing new applications for all of our markets including an innovative buffer layer for thin film solar cells, transparent conductive oxide systems for transparent electronics and thin film solar. These efforts include accelerating time to market for those applications and involve ongoing research and development expense.

Marketing and Sales Expense

Marketing and sales expense was $47,387 and $69,346 for the three months ended June 30, 2020 and 2019, respectively. This was a decrease of $21,959 or 31.7%. This decrease was primarily related to lower travel and compensation expenses of approximately $19,000.

Marketing and sales expense was $99,171 and $137,965 for the six months ended June 30, 2020 and 2019, respectively. This was a decrease of $38,794 or 28.1%. This decrease was primarily related to lower travel expenses of approximately $27,000 and lower outside sales commissions of $6,000. Travel was limited during the first six months of 2020 due the cancellation of tradeshows and limited direct contact with customers in response to COVID-19 orders issued by national health organizations and state officials.

Stock Compensation Expense

---

Included in total expenses were non-cash stock-based compensation costs of $31,182 and $31,376 for the three months ended June 30, 2020 and 2019, respectively, and $62,362 and $65,536 for the six months ended June 30, 2020 and 2019, respectively. Compensation expense for all stock-based awards is based on the grant date fair value and recognized over the required service (vesting) period. Unrecognized non-cash stock-based compensation expense was $13,398 as of June 30, 2020 and will be recognized through 2023.

---

Interest, net

Interest expense was $7,300 for the three months ended June 30, 2020 and $14,669 for the three months ended June 30, 2019. Interest expense was $11,369 for the six months ended June 30, 2020 and $13,481 for the six months ended June 30, 2019. The second quarter of 2019 included $17,396 of expense for the first six months of 2019 which was related to the new operating lease standard that became effective January 1, 2019.

18

Item 2.	Management's Discussion and Analysis of FinancialCondition and Results of Operations (continued)

Income Applicable to CommonStock

Income applicable to common stock for the three months ended June 30, 2020 and 2019, was $14,422 and $160,380, respectively. Income applicable to common stock for the six months ended June 30, 2020 and 2019 was $89,900 and $309,684, respectively. The decrease was the result of lower gross profit which was partially offset by lower operating expenses.

---

Liquidity and Capital Resources

Cash

As of June 30, 2020, cash on hand was $1,924,807 compared to $1,828,397 at December 31, 2019. On April 17, 2020 we entered into an unsecured promissory note under the Paycheck Protection Program (the “PPP”), with a principal amount of $325,300 received April 24, 2020. We anticipate that most (if not all) of this loan will be forgiven by the SBA.

Working Capital

At June 30, 2020 working capital was $2,309,261 compared to $1,992,328 at December 31, 2019, an increase of $316,933, or 15.9%. Inventories decreased $1,878,014 and customer deposits decreased $2,071,317 due to prepaid orders shipped during 2020. Also, accounts payable decreased $74,390.

Cash from Operations

Net cash provided by operating activities during the six months ended June 30, 2020, was $8,818 and $293,280 for the six months ended June 30, 2019. This included depreciation and amortization of $228,680 and $255,563 and non-cash stock-based compensation costs of $62,362 and $65,536 for the six months ended June 30, 2020 and 2019, respectively. In addition, accrued expenses and customer deposits decreased $2,086,240 and $223,047 for the six months ended June 30, 2020 and 2019, respectively, which were offset by reduced inventory levels in 2020. The inventory reserve increased $39,814 during the first six months of 2020 due to current uncertainties regarding specific product shipments to international customers.

Cash fromInvesting Activities

Cash of $167,999 was used in investing activities during the six months ended June 30, 2020, for the acquisition of production equipment. During the six months ended June 30, 2019, $212,195 was used in investing activities which included an in-plant office mezzanine in addition to the acquisition of production equipment.

Cash from FinancingActivities

Cash of $48,620 and $76,391 was used in financing activities for principal payments to third parties for finance lease obligations and notes payable during the six months ended June 30, 2020 and 2019, respectively. As previously mentioned, during the second quarter of 2020 we entered into an unsecured promissory note under the Paycheck Protection Program (the “PPP”), with a principal amount of $325,300, with the expectation that most (if not all) of this loan will be forgiven by the SBA. Also, a dividend payment of $24,152 was made to owners of our Series B preferred stock during the second quarter of 2020 and 2019.

19

Item 2.	Management's Discussion and Analysis of FinancialCondition and Results of Operations (continued)

Debt Outstanding

Total debt outstanding increased to $500,515 at June 30, 2020, from $223,835 at December 31, 2019. The increase was due to the proceeds received from the unsecured promissory note under the Paycheck Protection Program (the “PPP”)

Off BalanceSheet Arrangements

---

We have no off-balance sheet arrangements including special purpose entities.

Critical Accounting Policies

The preparation of financial statements and related disclosures in conformity with accounting principles generally accepted in the United States requires management to make judgments, assumptions and estimates that affect the amounts reported in the Financial Statements and accompanying notes*.*Note 2 to the Financial Statements in our Annual Report on Form 10-K for the year ended December 31, 2019, describes the significant accounting policies and methods used in the preparation of the Financial Statements. Estimates are used for, but not limited to, accounting for the allowance for doubtful accounts, inventory allowances, property and equipment depreciable lives, patents and licenses useful lives, revenue recognition, tax valuation allowance, stock-based compensation and assessing changes in which impairment of certain long-lived assets may occur. Actual results could differ from these estimates. The following critical accounting policies are impacted significantly by judgments, assumptions and estimates used in the preparation of the Financial Statements. The allowance for doubtful accounts is based on our assessment of the collectability of specific customer accounts and the aging of the accounts receivable. If there is a deterioration of a major customer’s credit worthiness or actual defaults are higher than our historical experience, our estimates of the recoverability of amounts due us could be adversely affected. Inventory purchases and commitments are based upon future demand forecasts. If there is a sudden and significant decrease in demand for our products or there is a higher risk of inventory obsolescence because of rapidly changing technology and customer requirements, we may be required to increase our inventory allowances and our gross margin could be adversely affected. Depreciable and useful lives estimated for property and equipment, licenses and patents are based on initial expectations of the period of time these assets and intangibles will benefit us. Changes in circumstances related to a change in our business, change in technology or other factors could result in these assets becoming impaired, which could adversely affect the value of these assets.

Item 4.	Controls and Procedures

---

Evaluation of Disclosure Controls andProcedures

Our management, with the participation of the Company’s Chief Executive Officer and Chief Financial Officer, has evaluated the effectiveness of the Company’s disclosure controls and procedures (as such term is defined in Rules 13a-15(e) and 15d-15(e) under the Securities Exchange Act of 1934, as amended (the “Exchange Act”)) as of the end of the period covered by this report. In designing and evaluating the disclosure controls and procedures, management recognized that any controls and procedures, no matter how well designed and operated, can only provide reasonable assurance of achieving the desired control objectives. Management is required to apply its judgment in evaluating the cost-benefit relationship of possible controls and procedures. Disclosure controls and procedures include, without limitation, controls and procedures designed to ensure that information required to be disclosed by the Company in the reports that it files or submits under the Exchange Act is accumulated and communicated to the Company’s management, including the Chief Executive Officer and Chief Financial Officer, to allow timely discussions regarding required disclosure.

20

Item 4.	Control and Procedures (continued)

Management previously disclosed a material weakness in internal control over financial reporting in its annual report on Form 10-K, filed on February 5, 2020, for the year ended December 31, 2019, relating to insufficient segregation of duties consistent with control objectives. Management is aware of the risks associated with the lack of segregation of duties due to the small number of employees currently working with general administrative and financial matters. Due to our size and nature, segregation of all conflicting duties may not always be possible and may not be economically feasible. However, to the extent possible, the initiation of transactions, the custody of assets and the recording of transactions shall be performed by separate individuals.

To address and remediate the material weakness in internal control over financial reporting described above, we performed a review of our related procedures and controls and strengthened cross approval of various functions, including financial reporting and disclosure review controls by the Chief Financial Officer, to include the Chief Executive Officer and Audit Committee Chairperson where appropriate. We continue to report to the Audit Committee and the Board of Directors at least monthly (and more often as necessary). This reporting includes balance sheets, statements of operations, statements of cash flows, and other detail supporting these statements.

Based on this evaluation, our Chief Executive Officer and Chief Financial Officer concluded that our disclosure controls and procedures are effective. Disclosure controls and procedures are defined by Rules 13a-15(e) and 15d-15(e) of the Exchange Act as controls and other procedures that are designed to ensure that information required to be disclosed by us in reports filed with the SEC under the Exchange Act is recorded, processed, summarized and reported within the time periods specified in the SEC’s rules and forms.

Inherent Limitations overInternal Controls

Our internal control over financial reporting is designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. Our internal control over financial reporting includes those policies and procedures that: (i) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of our assets; (ii) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures are being made only in accordance with authorizations of management and directors; and (iii) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of assets that could have a material effect on the financial statements.

Management is responsible for the consistency, integrity, and presentation of information. To fulfill our responsibility, we maintain systems of internal control designed to provide reasonable assurance that assets are safeguarded and transactions are executed in accordance with established procedures. The concept of reasonable assurance is based upon recognition that the cost of the controls should not exceed the benefit derived. We believe our systems of internal control provide this reasonable assurance.

The Board of Directors exercises its oversight role with respect to our systems of internal control primarily through its Audit Committee, which is comprised of independent directors. The Committee oversees our financial reporting, quarterly reviews and audits to assess whether their quality, integrity, and objectivity are sufficient to protect shareholders’ investments.

21

Item 4.	Control and Procedures (continued)

Changes in Internal Controlsover Financial Reporting

Other than the remediation described above, there were no changes in our internal controls over financial reporting for the three months ended June 30, 2020, that materially affected or were reasonably likely to materially affect our disclosure controls and procedures. Additionally, there were no changes in our internal controls that could materially affect our disclosure controls and procedures subsequent to the date of their evaluation.

22

Item6. Exhibits
3(a)		Certificate of Second Amended and Restated Articles of Incorporation of Superconductive Components, Inc. (Incorporated by reference to Exhibit 3(a) to the Company’s initial Form 10-SB, filed on September 28, 2000)
3(b)		Restated Code of Regulations of Superconductive Components, Inc. (Incorporated by reference to Exhibit 3(b) to the Company’s initial Form 10-SB, filed on September 28, 2000)
3(c)		Amendment to Articles of Incorporation recording the change of the corporate name to SCI Engineered Materials, Inc.  (Incorporated by reference to Exhibit 3.1 to the Company’s Quarterly Report on Form 10-QSB filed November 7, 2007).
4(a)		SCI Engineered Materials, Inc. 2011 Stock Incentive Plan (Incorporated      by reference to the Company’s Definitive Proxy Statement for the 2011  Annual Meeting of Shareholders held on June 10, 2011, filed April 28,  2011).
4(b)		Superconductive Components, Inc. 2006 Stock Incentive Plan (Incorporated by reference to Appendix A to the Company’s Definitive Proxy Statement for the 2006 Annual Meeting of Shareholders held on June 9, 2006, filed May 1, 2006).
10(a)		Description of Bonding Agreement between the Company and Konfoong Material International Co., Ltd. dated as of December 18, 2018 (Incorporated by reference to the Company’s Current Report on Form 8-K, dated December 18, 2018).
10(b)		Employment Agreement entered into as of December 13, 2018, between Jeremy Young and the Company.
10(c)		Description of Unsecured Promissory Note administered by the U.S. Small Business Administration for funds received April 24, 2020 (Incorporated by reference to the Company’s Current Report on Form 8-K, dated April 29, 2020).
14(a)		SCI Engineered Materials<br> Code of Ethics for the Chief Executive Officer and Chief Financial Officer (Incorporated by reference to the Company’s<br> Current Report via the Company’s website at www.sciengineeredmaterials.com)
31.1	*	Rule 13a-14(a) Certification of Principal Executive Officer.
31.2	*	Rule 13a-14(a) Certification of Principal Financial Officer.
32.1	*	Section 1350 Certification of Principal Executive Officer.
32.2	*	Section 1350 Certification of Principal Financial Officer.
99.1		Press Release dated August 7, 2020, entitled “SCI Engineered Materials, Inc., Reports Second Quarter and Year-to-Date 2020 Results.”
101		The Company’s Quarterly Report on Form 10-Q for the quarter ended June 30, 2020, formatted in XBRL (eXtensible Business Reporting  Language): (i) Consolidated Balance Sheets at June 30, 2020 and  December 31, 2019 (ii) Consolidated Statements of Operations for the three and six months ended June 30, 2020 and 2019, (iii)  Consolidated Statement of Changes in Equity for the three and six months ended June 30, 2020 and 2019, (iv) Consolidated Statements of Cash Flows for the six months ended June 30, 2020 and 2019, and (v) Notes to Financial  Statements.

* Filed herewith

---

23

---

Signatures

Pursuant to the requirements of the Securities Exchange Act of 1934, the Registrant has duly caused this report to be signed on its behalf by the undersigned thereunto duly authorized.

	SCI<br> ENGINEERED MATERIALS, INC.
Date:<br>   August 7, 2020	/s/ Jeremiah R. Young
	Jeremiah<br> R. Young, President and Chief Executive Officer
	(Principal<br> Executive Officer)
	/s/<br> Gerald S. Blaskie
	Gerald<br> S. Blaskie, Vice President and Chief Financial Officer
	(Principal<br> Financial Officer and Principal Accounting Officer)

24

Exhibit 31.1

CERTIFICATION OF CHIEF EXECUTIVE OFFICER

PURSUANT TO SECTION 302 OF THE SARBANES-OXLEYACT OF 2002

I, Jeremiah R. Young, certify that:

1.	I have reviewed this Quarterly Report on Form 10-Q of SCI Engineered Materials, Inc.;
2.	Based on my knowledge, this report does not contain any untrue statement of a material fact or<br>omit to state a material fact necessary to make the statements made, in light of the circumstances under which such statements<br>were made, not misleading with respect to the period covered by this report;
---	---
3.	Based on my knowledge, the financial statements, and other financial information included in this<br>report, fairly present in all material respects the financial condition, results of operations and cash flows of the registrant<br>as of, and for, the periods presented in this report;
---	---
4.	The registrant’s other certifying officer(s) and I are responsible for establishing and maintaining<br>disclosure controls and procedures (as defined in Exchange Act Rules 13a-15(e) and 15d-15(e)) and internal control over financial<br>reporting (as defined in Exchange Act Rules 13a-15(f) and 15d-15(f)) for the registrant and have:
---	---
a)	Designed such disclosure controls and procedures, or caused such disclosure controls and procedures<br>to be designed under our supervision, to ensure that material information relating to the registrant, including its consolidated<br>subsidiaries, is made known to us by others within those entities, particularly during the period in which this report is being<br>prepared;
---	---
b)	Designed such internal control over financial reporting, or caused such internal control over financial<br>reporting to be designed under our supervision, to provide reasonable assurance regarding the reliability of financial reporting<br>and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles;
---	---
c)	Evaluated the effectiveness of the registrant’s disclosure controls and procedures and presented<br>in this report our conclusions about the effectiveness of the disclosure controls and procedures, as of the end of the period covered<br>by this report based on such evaluation; and
---	---
d)	Disclosed in this report any change in the registrant’s internal control over financial reporting<br>that occurred during the registrant’s most recent fiscal quarter (the registrant’s fourth fiscal quarter in the case<br>of an annual report) that has materially affected, or is reasonably likely to materially affect, the registrant’s internal<br>control over financial reporting; and
---	---
5.	The registrant’s other certifying officer(s) and I have disclosed, based on our most recent<br>evaluation of internal control over financial reporting, to the registrant’s auditors and the audit committee of the registrant’s<br>board of directors (or persons performing the equivalent functions):
---	---
a)	All significant deficiencies and material weaknesses in the design or operation of internal control<br>over financial reporting which are reasonably likely to adversely affect the registrant’s ability to record, process, summarize<br>and report financial information; and
---	---
b)	Any fraud, whether or not material, that involves management or other employees who have a significant<br>role in the registrant’s internal control over financial reporting.
---	---
Date: August 7, 2020	/s/ Jeremiah R. Young
---	---
	Jeremiah R. Young
	President and Chief Executive Officer
	(Principal Executive Officer)

Exhibit31.2

CERTIFICATION OF CHIEF FINANCIAL OFFICER

PURSUANT TO SECTION 302 OF THE SARBANES-OXLEYACT OF 2002

I, Gerald S. Blaskie, certify that:

1.	I have reviewed this Quarterly Report on Form 10-Q of SCI Engineered Materials, Inc.;
2.	Based on my knowledge, this report does not contain any untrue statement of a material fact or<br>omit to state a material fact necessary to make the statements made, in light of the circumstances under which such statements<br>were made, not misleading with respect to the period covered by this report;
---	---
3.	Based on my knowledge, the financial statements, and other financial information included in this<br>report, fairly present in all material respects the financial condition, results of operations and cash flows of the registrant<br>as of, and for, the periods presented in this report;
---	---
4.	The registrant’s other certifying officer(s) and I are responsible for establishing and maintaining<br>disclosure controls and procedures (as defined in Exchange Act Rules 13a-15(e) and 15d-15(e)) and internal control over financial<br>reporting (as defined in Exchange Act Rules 13a-15(f) and 15d-15(f)) for the registrant and have:
---	---
a)	Designed such disclosure controls and procedures, or caused such disclosure controls and procedures<br>to be designed under our supervision, to ensure that material information relating to the registrant, including its consolidated<br>subsidiaries, is made known to us by others within those entities, particularly during the period in which this report is being<br>prepared;
---	---
b)	Designed such internal control over financial reporting, or caused such internal control over financial<br>reporting to be designed under our supervision, to provide reasonable assurance regarding the reliability of financial reporting<br>and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles;
c)	Evaluated the effectiveness of the registrant’s disclosure controls and procedures and presented<br>in this report our conclusions about the effectiveness of the disclosure controls and procedures, as of the end of the period covered<br>by this report based on such evaluation; and
d)	Disclosed in this report any change in the registrant’s internal control over financial reporting<br>that occurred during the registrant’s most recent fiscal quarter (the registrant’s fourth fiscal quarter in the case<br>of an annual report) that has materially affected, or is reasonably likely to materially affect, the registrant’s internal<br>control over financial reporting; and
5.	The registrant’s other certifying officer(s) and I have disclosed, based on our most recent<br>evaluation of internal control over financial reporting, to the registrant’s auditors and the audit committee of the registrant’s<br>board of directors (or persons performing the equivalent functions):
---	---
a)	All significant deficiencies and material weaknesses in the design or operation of internal control<br>over financial reporting which are reasonably likely to adversely affect the registrant’s ability to record, process, summarize<br>and report financial information; and
---	---
b)	Any fraud, whether or not material, that involves management or other employees who have a significant<br>role in the registrant’s internal control over financial reporting.
Date: August 7, 2020	/s/ Gerald S. Blaskie
---	---
	Gerald S. Blaskie
	Vice President and Chief Financial Officer
	(Principal Financial Officer and Principal Accounting Officer)

Exhibit 32.1

---

CERTIFICATION PURSUANT TO18 U.S.C. SECTION 1350,AS ADOPTED PURSUANT TOSECTION 906 OF THE SARBANES-OXLEY ACT OF 2002

In connection with the Quarterly Report of SCI Engineered Materials, Inc. (the “Company”) on Form 10-Q for the period ending June 30, 2020 as filed with the Securities and Exchange Commission on the date hereof (the “Report”), I, Jeremiah R. Young, President and Chief Executive Officer of the Company, certify, pursuant to 18 U.S.C. § 1350, as adopted pursuant to § 906 of the Sarbanes-Oxley Act of 2002, that:

(1)       The Report fully complies with the requirements of section 13(a) or 15(d) of the Securities Exchange Act of 1934; and

(2)       The information contained in the Report fairly presents, in all material respects, the financial condition and result of operations of the Company.

/s/ Jeremiah R. Young
Jeremiah R. Young
President and Chief Executive Officer of
SCI Engineered Materials, Inc.
(Principal Executive Officer)
August 7, 2020

Exhibit 32.2

CERTIFICATION PURSUANT TO18 U.S.C. SECTION 1350,AS ADOPTED PURSUANT TOSECTION 906 OF THE SARBANES-OXLEY ACT OF 2002

In connection with the Quarterly Report of SCI Engineered Materials, Inc. (the “Company”) on Form 10-Q for the period ending June 30, 2020 as filed with the Securities and Exchange Commission on the date hereof (the “Report”), I, Gerald S. Blaskie, Vice President and Chief Financial Officer of the Company, certify, pursuant to 18 U.S.C. § 1350, as adopted pursuant to § 906 of the Sarbanes-Oxley Act of 2002, that:

(1)       The Report fully complies with the requirements of section 13(a) or 15(d) of the Securities Exchange Act of 1934; and

(2)       The information contained in the Report fairly presents, in all material respects, the financial condition and result of operations of the Company.

/s/ Gerald S. Blaskie
Gerald S. Blaskie
Vice President and Chief Financial Officer of
SCI Engineered Materials, Inc. (Principal Financial Officer and Principal Accounting Officer)
August 7, 2020