DMC Global Inc 10-K for FY2025
DMC Global Inc. (BOOM)
10-K
2026-02-23
For: 2025-12-31
View Original
Added on
April 10, 2026
About this 10-K
DMC Global Inc filed this 10-K on February 23, 2026, covering the fiscal year ended December 31, 2025 (FY2025).
Headline figures
Fiscal year ended December 31, 2025, as reported in this filing, compared with the same period a year earlier where the filing states it.
- Revenue
- $609.84M
- down 5.1% from $642.85M a year earlier
- Net loss
- $13.45M
- compared with a net loss of $94.45M a year earlier
- Diluted EPS
- -$0.90
- compared with -$8.20 a year earlier
UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
WASHINGTON, D.C. 20549
Form 10-K
For the fiscal year ended December 31 , 2025
FOR THE TRANSITION PERIOD FROM ______ TO ______
Commission file number 001-14775
(Exact name of Registrant as Specified in its Charter)
| (State of Incorporation or Organization) | (I.R.S. Employer Identification No.) | |||||||
(Address of principal executive offices, including zip code)
(303 ) 665-5700
(Registrant’s telephone number, including area code)
Securities registered pursuant to Section 12(b) of the Act:
| Title of each class | Trading Symbol | Name of each exchange on which registered | ||||||||||||
Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes o No x
Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or 15(d) of the Act from their obligations under those sections. Yes o No x
Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes x No o
Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files). Yes x No o
Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company, or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company,” and “emerging growth company” in Rule 12b-2 of the Exchange Act.
Large accelerated filer o | ||||||||
Non-accelerated filer o | Smaller reporting company | |||||||
Emerging growth company | ||||||||
If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. o
Indicate by check mark whether the registrant has filed a report on and attestation to its management’s assessment of the effectiveness of its internal control over financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C. 7262(b)) by the registered public accounting firm that prepared or issued its audit report. ☒
If securities are registered pursuant to Section 12(b) of the Act, indicate by check mark whether the financial statements of the registrant included in the filing reflect the correction of an error to previously issued financial statements. ☐
Indicate by check mark whether any of those error corrections are restatements that required a recovery analysis of incentive-based compensation received by any of the registrant’s executive officers during the relevant recovery period pursuant to §240.10D-1(b). ☐
Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 under the Act). Yes ☐ No x
The approximate aggregate market value of the voting stock held by non-affiliates of the registrant was $155,821,973 as of June 30, 2025.
The number of shares of Common Stock outstanding was 20,485,914 as of February 17, 2026.
Certain information required by Items 10, 11, 12, 13 and 14 of Form 10-K is incorporated by reference into Part III hereof from the registrant’s proxy statement for its 2026 Annual Meeting of Stockholders, which is expected to be filed with the Securities and Exchange Commission (“SEC”) within 120 days of the close of the registrant’s fiscal year ended December 31, 2025.
TABLE OF CONTENTS
| Page | ||||||||
PART I
Forward-Looking Statements
This Annual Report on Form 10-K (“Form 10-K” or “this report”) and the documents incorporated by reference into it contain certain forward-looking statements within the meaning of Section 27A of the Securities Act of 1933, as amended and Section 21E of the Securities Exchange Act of 1934, as amended (the “Exchange Act”). All such statements are made pursuant to the safe harbor provisions of the Private Securities Litigation Reform Act of 1995. Words such as “anticipates,” “expects,” “intends,” “plans,” “believes,” “seeks,” “estimates,” “may,” “will,” “continue,” “project,” “forecast,” and similar expressions, as well as statements in the future tense, identify forward-looking statements. Statements addressing events or developments that we expect or anticipate will occur in the future, including statements relating to our future operating performance, any of our businesses’ future financial and operational growth or technical and product expansions, the potential acquisition of the 40% minority interest in Arcadia Products, LLC (“Arcadia Products”), our backlog and anticipated future sales and market share, as well as statements expressing optimism or pessimism about future operating results, are forward-looking statements within the meaning of the federal securities laws.
Forward-looking statements are not guarantees of our future performance and are subject to risks and uncertainties that could cause actual results to differ materially from the results contemplated by the forward-looking statements. These risks and uncertainties include those relating to:
•Changes in global economic conditions, including tariffs or reciprocal tariffs;
•The ability to obtain new contracts at attractive prices;
•The size and timing of customer orders and shipments;
•Product pricing and margins;
•Our ability to realize sales from our backlog and our ability to adjust our manufacturing and supply chain;
•Fluctuations in customer demand;
•Our ability to manage periods of growth and contraction effectively;
•General economic conditions, both domestic and foreign, impacting our business and the business of the end-market users we serve;
•Competitive factors;
•The timely completion of contracts;
•The timing and size of expenditures;
•The timely receipt of government approvals and permits;
•The price and availability of metal and other raw materials;
•The adequacy of local labor supplies at our facilities;
•Current or future limits on manufacturing capacity at our various operations;
•The impact of catastrophic weather events on our business and that of our customers;
•Our ability to successfully integrate acquired businesses;
•The ability to remain an innovative leader in our fields of business;
•The costs and impacts of pending or future litigation or regulatory matters;
•Changes to legislation, regulation or public sentiment related to our business and the industries in which our customers operate;
•The impacts of trade and economic sanctions or other restrictions imposed by the European Union, the United States or other countries;
•Costs and risks associated with compliance with laws and regulations, including the United States Foreign Corrupt Practices Act (“FCPA”) and similar legislation;
•The availability and cost of funds;
•Fluctuations in foreign currencies;
•Actions of activist stockholders or others; and
•The impact of our stockholder protection rights agreement, which includes terms and conditions that could discourage a takeover or other transaction that stockholders may consider favorable.
The effects of these factors are difficult to predict. New factors emerge from time to time, and we cannot assess the potential impact of any such factor on our business or the extent to which any factor, or combination of factors, may cause results to differ materially from those contained in any forward-looking statement. All forward-looking statements speak only as of the date of this annual report, and we do not undertake any obligation to update any forward-looking statement to reflect events or circumstances after the date of such statement or to reflect the occurrence of unanticipated events. In addition, readers of this report should refer to Part I, Item 1A. Risk Factors for a discussion of these and other factors that could materially affect our results of operations and financial condition.
ITEM 1. Business
References made in this Annual Report on Form 10-K to “we”, “our”, “us”, “DMC”, “DMC Global” and the “Company” refer to DMC Global Inc. and its consolidated subsidiaries. Unless stated otherwise, all dollar figures in this report are presented in thousands (000s).
Overview
DMC Global Inc. (“DMC”, “we”, “us”, “our”, or the “Company”) operates three manufacturing businesses: Arcadia Products, DynaEnergetics and NobelClad, which provide differentiated products and engineered solutions primarily for the construction, energy, and industrial processing markets. Arcadia Products designs, engineers, fabricates and finishes aluminum framing systems, windows, curtain walls, storefronts, entrance systems, and interior partitions for the commercial construction market. Arcadia Products also supplies customized windows and doors to the high-end residential construction market. DynaEnergetics is a vertically integrated, global manufacturer of advanced perforating systems used in oil and gas well completion and well plug-and-abandonment operations. DynaEnergetics designs, engineers, manufactures, and qualifies its perforating components and systems in-house. NobelClad produces explosion-welded clad metal plates for use in the construction of corrosion-resistant industrial processing equipment. NobelClad also produces specialized transition joints for a broad range of applications, including aluminum smelting, ship construction, and liquified natural gas (“LNG”) processing equipment.
Arcadia Products uses a network of manufacturing, fabrication and distribution centers throughout the United States to sell its products, while DynaEnergetics and NobelClad operate globally through an international network of manufacturing, distribution and sales facilities. Refer to Note 11 “Business Segments” within Part II, Item 8 — Financial Statements and Supplementary Data for net sales and operating income (loss) for each of our segments.
Our Strategy
Our strategy is to maximize the value of our company by capitalizing on the unique strengths of each of our three businesses. Arcadia Products, which has established a differentiated model for its core commercial building products, serves a multi-billion dollar addressable market and is seeking to grow its position in its targeted markets throughout the western and southwestern United States. DynaEnergetics and NobelClad each have established leadership positions in their respective segments of the energy and industrial equipment industries, and both are pursuing various growth opportunities.
Business Segments
Arcadia Products
Arcadia Products provides architectural building products to the U.S. construction industry through three branded product offerings: Arcadia, which serves the commercial exteriors market; Wilson Partitions, which serves the commercial interiors market; and Arcadia Custom, which is used in the high-end residential market.
Arcadia
The Arcadia product offering consists of designed, engineered, fabricated and finished aluminum framing systems, windows, curtain walls, storefronts, entrance systems, and other architectural components for use in the commercial exteriors
1
market. These products allow architects to create distinctive looks for buildings such as office towers, airports, hotels, education and athletic facilities, health care facilities, government buildings, retail centers, mixed use and multi-family residential buildings, and industrial and manufacturing centers. The products also help address functional requirements such as energy efficiency, hurricane, blast and other impact resistance and/or sound control.
Arcadia’s offerings are sold through an integrated “hub and satellite” network. Light manufacturing, anodizing and painting of aluminum components are performed in Vernon, California, and the component products are shipped to a network of service centers located in markets throughout the western and southwestern United States. Arcadia Products also sources some anodized material directly from third-party extruders. Products are designed to address regional needs and preferences, and each satellite seeks to offer superior product availability, short lead times, product customization, and design and engineering support. Arcadia has attracted a loyal base of regional glazing contractors, subcontractors, commercial architects and designers. In 2025, the Arcadia line accounted for approximately 77% of the net sales of Arcadia Products.
Wilson Partitions
The Wilson Partitions product line is used in the commercial interior framing and partitions markets across the United States, and consists of framing systems, aluminum doors, sliding systems and glazing systems. This line is manufactured in centralized production facilities in California, and is supported by facilities in Connecticut and Texas. The products address both new construction and repairs and remodels; and product capabilities include noise control, fire rating, built-to-order custom finishes, and other functional and aesthetic features. In 2025, the Wilson Partitions line accounted for approximately 13% of the net sales of Arcadia Products.
Arcadia Custom
The Arcadia Custom product line is used by the high-end residential construction market throughout the United States, and is manufactured at production facilities in California, Arizona and Connecticut. It consists of a broad range of custom, fully fabricated aluminum, steel and wood windows and doors for the luxury home market. The Arcadia Custom product team works closely with architects, owners, contractors and installers to provide support throughout the planning, design and installation phases of a residential construction process. In 2025, the Arcadia Custom line accounted for approximately 10% of the net sales of Arcadia Products.
Environmental Sustainability
Arcadia Products’ operations have an ongoing focus on environmental sustainability, including hazardous waste recycling and initiatives aimed at reducing waste. All of Arcadia’s commercial building products and many of our residential product offerings are made from aluminum, including recycled aluminum content.
Many of our architectural products help architects, developers, and building owners achieve their energy-efficiency and sustainability goals by improving energy performance, thereby reducing greenhouse gas emissions, providing daylight and natural ventilation, and increasing comfort and safety for occupants. Arcadia Products offers high-performance products that comply with the Leadership in Energy and Environmental Design (“LEED”) Green Building Rating System. In addition, Arcadia Products offers renovation solutions to help modernize aging buildings, providing significantly improved energy performance.
Operations
Arcadia Products is headquartered in Vernon, California, and operates four manufacturing facilities and 10 fabrication and distribution facilities. Anodized and painted aluminum components for Arcadia Products’ applicable offerings are manufactured in Vernon, with additional painting and manufacturing capacity in its Tucson, Arizona facility.
During the years ended December 31, 2025, 2024, and 2023, Arcadia Products represented approximately 40%, 39%, and 42% of DMC’s consolidated net sales, respectively.
Product Warranties
Arcadia Products offers product warranties that are believed to be competitive for the markets in which its products are sold. The nature and extent of these warranties depend upon the product, the market and, in some cases, the customer being served.
2
Suppliers and Raw Materials
Materials used in the Arcadia and Wilson Partitions commercial product lines include both finished and unfinished aluminum extrusions, paint and hardware. Materials used in the Arcadia Custom residential product line include aluminum, steel, wood, paint, fabricated glass and hardware. The availability, quality, and costs of many of these commodities have fluctuated, and may continue to fluctuate, over time and are primarily sourced in North America. Generally, we have been able to address raw material price increases in our product pricing to customers. Recently, however, persistently high interest rates, generally lower construction activity in core regional markets, and higher raw material and labor costs have created a competitive bidding environment which has impacted Arcadia Products’ ability to fully pass through higher input costs.
Aluminum is our most important raw material, and we currently have the ability to source from several major suppliers. Other raw materials are readily available from a variety of domestic sources. Arcadia Products generally has good relationships with its suppliers and strives to proactively manage raw material availability and pricing.
Competition
Arcadia and Wilson Partitions
The North American exterior and interior commercial construction markets are highly fragmented. Competitive factors include price, product quality, product attributes and performance, reliable service, regional satellites, local availability, lead-time, on-time delivery, project management, technical engineering and design services. To protect and enhance our competitive position, we maintain strong relationships with our customers and strive to provide value throughout the value chain. There is a great deal of competition in the North American commercial window, storefront and partition manufacturing industry, and the Arcadia and Wilson Partition product lines compete against several national, regional and local manufacturers, as well as regional paint and anodizing finishing companies.
We believe the Arcadia and Wilson Partitions product lines benefit from low-cost manufacturing platforms, effective supply chain management, broad model offerings, product quality and availability, short lead times and highly diversified and long-tenured customer bases. These benefits create significant competitive advantages relative to many other exterior and interior building products manufacturers.
Arcadia Custom
The Arcadia Custom line faces competition nationally from several large, well-known manufacturers and from many smaller, regional competitors. Competitive factors include product quality and design, aesthetics, dealer relationships and relationships with architects and luxury home builders.
Marketing, Sales, Distribution
The Arcadia line relies on a reputation for strong customer service, quality products and competitive lead times to maintain and attract customers. It benefits from strong relationships with local glaziers, installers and subcontractors.
Wilson Partitions products are sold through a national in-house sales force and external sales representatives.
The sales strategy for the Arcadia Custom line is focused on direct selling through a national internal sales team and a dealer network that markets our products to architects and luxury home builders. The sales team focuses on attracting and retaining dealers by striving to consistently provide exceptional customer service, leading product designs and quality, technical expertise and competitive pricing.
Ownership and Management
Following the closing of the Arcadia Products acquisition in December 2021, DMC (through its direct ownership and indirect ownership through our subsidiary DMC Korea) owns 60% of Arcadia Products and the remaining 40% is owned by New Arcadia Holdings, Inc., which is wholly-owned by Synergex Arcadia Holdings LLC, and successor to the previous majority owner of Arcadia, Inc. (“Munera”). Arcadia Products is governed by an Operating Agreement among the Company, Arcadia Products and Munera (the “Operating Agreement”). Pursuant to the Operating Agreement, the Company has the right to appoint four directors to Arcadia Products’ board of directors (the “Arcadia Board”), one of whom will serve as Chairman of the Arcadia Board, and Munera has the right to appoint three directors. If Munera’s ownership in Arcadia Products declines, the number of directors it has the right to appoint will be reduced in the manner set forth in the Operating Agreement. The Arcadia
3
Board generally acts by majority vote of the directors, but certain matters specified in the Operating Agreement require the affirmative vote of 80% of the directors.
At any time on or after September 6, 2026, Munera has the right (but not the obligation) to require the Company to purchase (the “Put Option”) its interests in Arcadia Products for a price based on the higher of (a) a value based on the acquisition purchase price and (b) a multiple of Arcadia Products’ average EBITDA for the preceding two fiscal years and its projected EBITDA for the then-current fiscal year (the “Option Purchase Price”), and at any time on or after December 23, 2024, the Company has the right (but not the obligation) to purchase all of Munera’s interests for a price calculated the same as above (the “Call Option”). If the Put Option is exercised, the Option Purchase Price may be paid, at DMC’s option, (i) in cash or (ii) 20% in cash and 80% in shares of a newly designated series of preferred stock of the Company (the “Put Preferred”) that would be authorized at that time. If the Company exercises the Call Option, the Option Purchase Price would be paid in cash. In addition, if the Company or all of its assets are acquired, the Call Option will be deemed to be exercised in connection with such a transaction. Refer to Note 2 “Significant Accounting Policies” within Part II, Item 8 — Financial Statements and Supplementary Data for additional discussion.
DynaEnergetics
DynaEnergetics designs, manufactures, markets and sells perforating systems and associated hardware for the global oil and gas industry. After the well drilling process, steel casing is inserted into the well and cemented in place to isolate and support the integrity of the wellbore. A perforating system, which contains a series of specialized explosive shaped charges, is used to punch holes through the casing and cement liner of the well and into the geologic formation surrounding the well bore. The channels created by the shaped charges allow hydrocarbons to flow back into the wellbore. When hydraulic fracturing is employed, the perforations and channels also provide a starting point and a path for the fracturing fluid to enter and return from the formation.
In unconventional wells, multiple perforating systems, which generally range from seven inches to three feet in length, are connected end-to-end into a perforating “string.” The string, which typically consists of 10 to 12 perforating systems, is lowered into the well and then pumped with fluid across the horizontal lateral to the target location within the shale formation. When the perforating systems are individually initiated via an electronic or digital signal from the surface, the shaped charges detonate. DynaEnergetics designs, manufactures and sells all five primary perforating-system components: the initiation system, shaped charges, detonating cord, gun hardware, and a control panel.
In North America’s well-completion industry, perforating components traditionally have been assembled by highly trained personnel at the well site or nearby assembly facility. In 2015, DynaEnergetics began assembling its perforating systems in a controlled environment at its manufacturing facilities in Blum, Texas. The systems, marketed as DynaStage® (“DS”) Factory-Assembled, Performance-Assured™ perforating systems, are shipped directly to the customers’ remote shop or well site. Since 2015, DynaEnergetics has added several new DS products to accommodate evolving industry conditions and needs.
Operations
The DynaEnergetics segment seeks to build on its products and technologies, as well as its sales, supply chain and distribution network. During the years ended December 31, 2025, 2024, and 2023, the DynaEnergetics segment represented approximately 44%, 45%, and 44% of DMC’s consolidated net sales, respectively.
DynaEnergetics operates manufacturing facilities in Germany and the United States. In Troisdorf, Germany, DynaEnergetics has six integrated detonator manufacturing lines, two shaped charge lines and a detonating cord manufacturing line. In Liebenscheid, Germany, DynaEnergetics operates a manufacturing facility for perforating guns and associated hardware. In the United States, DynaEnergetics has three shaped charge manufacturing lines in Blum, Texas, where product assembly and metal fabricating also occur. We have a second metal fabricating facility in Whitney, Texas. These locations provide global capacity for shaped charge and perforating system production and enhance delivery and customer service capabilities in key markets.
Products
IS2 / IS3: DynaEnergetics has focused on the advancement of safe and selective perforating products for use in North America’s shale, or onshore, unconventional, oil and gas industry. Among these products are the IS2™ and IS3™ Intrinsically Safe Initiating Systems, which include the IS2™ Customer Assembled (“CA”) detonator and the wire-free, plug-in, IS3 Top Fire (“TF”) detonator. The IS3 TF detonator is the key enabling technology in DynaEnergetics’ family of DS Factory-Assembled, Performance-Assured perforating systems. The IS3 detonators require a specific digital code for firing and are
4
immune from induced currents and voltages, static electricity and high-frequency irradiation. These safety features substantially reduce the risk of unintentional detonation and enable concurrent perforating and hydraulic fracturing operations at well sites with multiple wellbores, improving operating efficiencies for customers. In response to the exacting needs of customers, we expanded and enhanced the IS3 product line, including adding an IS3 igniter specifically designed for our DS Liberator 2.0 and the DS MicroSet™ 2.0.
DS Systems: The DS Infinity™ 2.0 Factory-Assembled, Performance-Assured perforating systems combine all of DynaEnergetics’ advanced technologies into a preassembled perforating gun that is armed at the well site with the Plug-and-Go™ IS3 TF detonator. The IS3 TF detonator is wire-free and eliminates the customary process of wiring the detonator into the perforating system at the well site. All DS systems are operated using in-house designed and manufactured Infinity™ Control Panels. The Infinity Panel is highly intuitive and allows the gun string to be safely tested and monitored throughout the pump-down operation. The system also incorporates a shot detection function resulting in significant time and cost savings. Design advancements to the IS2 / IS3 lines of initiation products enable customers to safely and reliably set a plug and fire up to 100 perforating systems in a single run. All DS systems can be tested before going down hole using the Infinity Surface Tester, reducing the risk of lost time, mishaps, misruns and misfires due to a system fault. DynaEnergetics is currently upgrading all of its perforating systems to utilize the next generation IS3 detonator, which will enhance the user experience.
DynaEnergetics has successfully expanded the family of DS perforating systems with various models: DS Gravity 2.0, a self-orienting system that features several shaped charges in a single lateral plane; DS NLine™ 2.0, a system that can be oriented at the surface before deployment; DS LoneStar™ 2.0, a single-shot system that delivers large, ultra-consistent entry holes with enhanced formation contact; and DS Echo™, a system designed for re-frac applications. These introductions continue DynaEnergetics’ work over many years to further improve performance and reliability, and expand its product offerings.
Shaped Charges: DynaEnergetics develops and sells a wide range of shaped charges for use in its perforating systems, including the LoneStar and EchoFrac™ charges specifically designed for sale in their respective systems. DynaEnergetics also sells HaloFrac™ charges, which incorporate advancements in liner materials and shaped charge geometry to improve hydraulic fracturing performance, the FracTune™ family of shaped charges, which delivers uniform hole diameter in the well casing independent of shot phasing and gun positioning within the well bore, and the DPEX™ family of charges, which feature energetic liners. All three charge lines can be used with the DS perforating system as well as conventional perforating gun systems across a range of gun diameters. In 2023, DynaEnergetics expanded on its portfolio of equal-entry hole shaped charges through the introduction of Oriented FracTune™, an improved oriented equal entry hole product designed to address the precise requirements of oriented perforating applications in the plug and perforating market. These charges enable exploration and production companies and their wireline service providers to choose from a variety of specifically designed shaped charges to match well completion design requirements.
TCP Systems: DynaEnergetics Tubing Conveyed Perforating (“TCP”) systems are customized for individual customer needs and well applications. TCP enables perforating of conventional vertical wells, as well as highly deviated and horizontal wells. These types of wells are increasingly being drilled by the offshore industry and in applications outside the U.S. TCP tools also perforate long intervals in a single trip, which significantly improves rig efficiency. The TCP tool range includes mechanical and hydraulic firing systems, gun releases, redundant firing heads, under-balancing devices and auxiliary components. DynaEnergetics’ tools are designed to withstand down-hole temperatures of up to 260 degrees Celsius (500 degrees Fahrenheit) for safe and quick assembly at the well site and to allow unrestricted total system length.
Setting and Ballistic Release Tools: DynaEnergetics also sells products that perform critical down-hole functions associated with the perforating process. DS MicroSet™ is a compact, disposable setting tool used to install the fracking plugs that isolate stages in a multi-stage, unconventional oil or gas well. In 2023, we launched DS Liberator™ 2.0, which is a newly designed ballistic release tool that enables wireline service companies to disengage from a perforating string that has become stuck in the well bore.
Plug and Abandonment: The DynaSlot™ perforating system is designed for plug and abandonment (“P&A”) operations. During well abandonment, the wellbore is encased and permanently sealed so that layers of sedimentary rock, and in particular freshwater aquifers, are pressure isolated from each other and the wellbore. The DynaSlot perforating system facilitates this process by creating access to a full 360-degree area between the rock formations and the tubing and/or casing. Customers use the unique helical perforation pattern created by DynaSlot to perform cement squeeze operations that seal off the wellbore. DynaEnergetics maintains its DPU and XPU shaped charge lines, which are designed for P&A and well remediation applications and enable perforating through two or more layers of casing and into the formation. DynaEnergetics also has successfully developed an encapsulated DynaSlot charge specifically designed for cutting down hole control lines. Most recently, DynaEnergetics developed its next generation DynaSlot shaped charges, designed specifically for severing and cutting
5
flat-pack control lines, which are mounted vertically behind the wellbore tubulars. Cutting control-lines without damaging the well’s integrity is a critical step in the process of permanently decommissioning offshore wells.
Suppliers and Raw Materials
DynaEnergetics’ product offering consists of complex components that require numerous high-end inputs. DynaEnergetics utilizes a variety of raw materials for the production of oilfield perforating products, including high-quality steel tubes, steel and copper, explosives, granulates, plastics and ancillary plastic product components. DynaEnergetics obtains its raw materials from a number of different producers in Germany, other European countries, and the U.S., but also purchases materials from other international suppliers.
Competition
DynaEnergetics faces competition from independent manufacturers of perforating products and from the industry’s three largest oil and gas service companies, which produce perforating systems for their own use and also buy systems and other perforating components and specialty products from independent suppliers such as DynaEnergetics. We compete for sales primarily on customer service, product quality, reliability, safety, performance, and price.
Customer Profile
DynaEnergetics’ perforating and seismic products are purchased by international and U.S. oilfield service companies of all sizes working in both onshore and offshore oil and gas fields. Its customers select perforating products based on their leading performance, system compatibility, product pricing, and ability to address a broad spectrum of factors, including pressures and temperatures in the wellbore and geological characteristics of the targeted formation.
The customers for DynaEnergetics’ energy products can be divided into four broad categories: purchasing centers of large service companies, international service companies, independent international and North America-based service companies (often referred to as “wireline” companies), and local resellers.
Marketing, Sales, Distribution
DynaEnergetics’ worldwide marketing and sales efforts for its oilfield products are managed from Troisdorf, Germany and Houston, Texas. DynaEnergetics’ sales strategy focuses on direct selling, distribution through licensed distributors and independent sales representatives, education of current and prospective service-company customers about its products and technologies, and education of E&P companies about the benefits of its products and technologies in an effort to generate pull-through demand. Currently, DynaEnergetics sells its oilfield and seismic products through wholly owned affiliates in Germany, the U.S., and Canada, and through independent sales agents in other parts of the world. DynaEnergetics serves the Americas region through its network of sales and distribution centers in the United States and Canada.
DynaEnergetics also designs and manufactures customized perforating products for third-party customers according to their designs and requirements.
Research and Development
DynaEnergetics devotes substantial resources to its research and development (“R&D”) programs. Based predominantly in Troisdorf, Germany, the R&D team works closely with sales, product management, and operations management teams to establish priorities and effectively manage individual projects. Through its ongoing involvement in oil and gas industry trade shows and conferences, DynaEnergetics maintains a strong profile in the oil and gas industry. In addition to its existing shaped charge test facility, which can simulate down-hole, wellbore, and reservoir pressure conditions to develop and test high performance perforating charges for both oil companies and service providers, the R&D group has a purpose-built pressure vessel which can reach 30,000 psi test pressures and be heated to up to 200 degrees Celsius (392 degrees F). This enables the R&D group to support the oil and gas industry with test methods for new products that realistically simulate potentially difficult down-hole conditions. In 2024, DynaEnergetics commissioned the horizontal test loop located at the Blum, Texas campus. This significant investment allows testing of the perforating systems in an environment mimicking down-hole flow conditions, which should enhance the development and testing programs. An R&D plan, which focuses on new technology, products, process support and contracted projects, is prepared and reviewed at least quarterly. R&D costs were $4,226, $4,415, and $5,610 for the years ended December 31, 2025, 2024, and 2023, respectively.
6
NobelClad
Explosion-welded cladding technology is a method for welding metals that cannot be joined using conventional welding processes, such as titanium-steel, aluminum-steel, and aluminum-copper. Explosion welding can also be used to weld compatible metals, such as stainless steels and nickel alloys to steel. The cladding metals are typically titanium, stainless steel, aluminum, copper alloys, nickel alloys, tantalum, and zirconium. The base metals are typically carbon steel, alloy steel, stainless steel and aluminum.
Explosion-welded clad metal is produced as flat plates or concentric cylinders, which can be further formed and fabricated into a broad range of industrial processing equipment or specialized transition joints. Created using a robust cold-welding technology, explosion-welded clad products exhibit high bond strength, often exceeding that of the parent metals. The dimensional capabilities of the process are broad: cladding metal layers can range from a few thousandths of an inch to several inches in thickness and base metal thickness and lateral dimensions are primarily limited by the capabilities of the world’s metal production mills.
Clad metal plates are used in the construction of heavy, corrosion-resistant pressure vessels and heat exchangers. Clad metal plates consist of a thin layer of an expensive, corrosion-resistant clad metal, such as titanium or nickel alloy, which is metallurgically welded to a less expensive structural backing metal, such as carbon steel. For heavy equipment, clad plates generally provide an economical alternative to building the equipment solely out of a corrosion-resistant alloy. While a significant portion of the demand for our clad metal products is driven by maintenance and retrofit projects at existing chemical processing, petrochemical processing, oil refining, and aluminum smelting facilities, new plant construction and large plant expansion projects also account for a significant portion of total demand. These industries tend to be cyclical in nature, and the timing of new order inflow remains difficult to predict.
Clad Metal End-Use Markets
The eight broad industrial sectors discussed below comprise the bulk of demand for NobelClad’s products, with oil and gas and chemical and petrochemical constituting approximately 68% of NobelClad bookings in 2025. This demand is driven by the underlying need for both new equipment and facility maintenance in these primary market sectors.
Oil and Gas: Oil and gas end use markets include both oil and gas production and petroleum refining. Oil and gas production covers a broad scope of operations related to recovering oil and/or gas for subsequent processing in refineries. Clad metal is used in separators, glycol contractors, pipelines, heat exchangers and other related equipment. Clad equipment is also advantageous for oil and gas production from deep, hot, and more corrosive fields. The primary clad metals for the oil and gas production market are stainless steel and nickel alloys clad to steel, with some use of reactive metals such as titanium.
Petroleum refining processes are frequently corrosive and operate at high temperatures and pressures. Clad metal is extensively used in a broad range of equipment including desulfurization hydrotreaters, coke drums, distillation columns, separators and heat exchangers. Reliance upon low-quality, high-sulfur crude drives demand for new corrosion-resistant equipment. Regulatory controls of sulfur emissions in gas, diesel and jet fuel also impact the need for clad equipment. Like the upstream oil and gas sector, the clad metals are primarily stainless steel and nickel alloys.
Chemical and Petrochemical: Many common products, ranging from plastics to prescription drugs to electronic materials, are produced by chemical processes. Because the production of these items often involves corrosive agents and is conducted under high pressure or temperatures, corrosion-resistant equipment is needed. One of the larger applications for clad equipment is in the manufacture of purified terephthalic acid (“PTA”), a precursor product for polyester, which is used in products as diverse as carpets and plastic bottles. The chemical market requires extensive use of stainless steel and nickel alloys, but also uses titanium, zirconium and tantalum.
Alternative Energy: Some alternative energy technologies involve conditions that necessitate clad metals. Solar panels predominantly incorporate high-purity polysilicon. Processes for manufacturing high-purity silicon utilize a broad range of highly corrosion-resistant clad alloys. Many geothermal fields are corrosive, requiring high alloy clad separators to handle the hot steam. In addition, some ethanol technologies and concentrating solar power technologies may require corrosion-resistant metals at thicknesses where clad is an attractive alternative.
Hydrometallurgy: The processes for the production of nickel, gold, and copper involve acids, high pressures, and high temperatures, and titanium-clad plates are used extensively for the construction of associated leaching and peripheral equipment such as autoclaves.
7
Aluminum Production: Primary aluminum is reduced from its oxide in large electric smelters called potlines. The electric current is carried via aluminum conductors. The electricity must be transmitted into steel components for the high temperature smelting operations. Aluminum cannot be welded to steel conventionally. Explosion-welded aluminum-steel transition joints provide an energy-efficient and highly durable solution for making these connections. Modern potlines use a large number of transition joints, which are typically replaced after approximately five years in service. Although primary aluminum production is the major electrochemical application for NobelClad products, there are several other electrochemical applications including the production of zinc, magnesium, chlorine and chlorate. We are seeing an increase for equipment related to processing biomass feedstocks and biofuel end products, mostly stainless and nickel alloy clad.
Shipbuilding: The combined problems of corrosion and top-side weight drive demand for our aluminum-steel transition joints, which serve as the juncture between a ship’s upper and lower structures. Top-side weight is often a significant problem with tall ships, including cruise ships, naval vessels, ferries and yachts. Use of aluminum in the upper structure and steel in the lower structure provides stability. Since aluminum cannot be welded directly to steel using conventional welding processes, and since bolted joints between aluminum and steel corrode quickly in seawater, explosion-welded transition joints are a common solution.
Power Generation: Fossil fuel and nuclear power generation plants require extensive use of heat exchangers, many of which require corrosion-resistant alloys to handle low-quality cooling water. Our clad plates are used for heat exchanger tube sheets, and the largest clad tube sheets are used in the final low-pressure condensers. For most coastal and brackish water-cooled plants, titanium is the metal of choice, and titanium-clad tube sheets are the low-cost solution for power plant condensers.
Industrial Refrigeration: Heat exchangers are a core component of refrigeration systems. When the cooling fluid is seawater, brackish, or even slightly polluted, corrosion-resistant metals are necessary. Metal selection can range from stainless steel to copper alloy to titanium. Explosion-welded clad metal is often the low-cost solution for making tube sheets. Applications range from refrigeration chillers on fishing boats to massive air conditioning units for skyscrapers, airports, and deep underground mines.
New Applications/Industry Development
NobelClad continues its efforts in applications and materials innovations, with the goal of expanding NobelClad’s end-use markets and customer base. Examples of these efforts include the development of a new application of clad in the production of engineered wood, development of improved electrical transition joints for smelting applications, high-pressure reactive metals chemical processing pipe systems and cryogenic joints to LNG and air separation units.
Operations
During the years ended December 31, 2025, 2024, and 2023, the NobelClad segment represented approximately 15%, 16%, and 15% of DMC’s consolidated net sales, respectively. NobelClad’s manufacturing facilities and their respective cladding sites in Pennsylvania and Germany provide the production capacity to address projects for NobelClad’s global customer base.
NobelClad uses proprietary processes and technology to produce high-quality clad metal products and limit re-work costs. The entire explosion-welding process involves significant precision in all stages, and any errors can be extremely costly as they often result in the discarding of the expensive raw material metals. NobelClad’s technological expertise helps ensure precision, minimize errors, and prevent costly waste.
NobelClad’s metal products are primarily produced for custom projects and conform to requirements set forth in customers’ purchase orders. Upon receipt of an order, NobelClad obtains the component materials from a variety of sources based on quality, availability and cost, and then produces the order in one of its manufacturing facilities. Final products are processed to meet contract-specific requirements for product configuration and quality/inspection level.
Products
NobelClad manufacturing technology is used in a variety of product applications.
DetaClad™: Our explosion clad plates and cylinders, available in 260 compatible and non-compatible metal combinations, are used in a range of industries as the basis for constructing pressure vessels, towers and crystallizers.
8
Tube Sheets: Our clad tube sheets are made from corrosion-resistant alloys, making them ideal for applications ranging from refrigeration chillers on fishing boats to air conditioners for use in food and pharmaceutical manufacturing.
Vessel Heads & Cylinders: NobelClad delivers high-quality clad heads of all sizes for reactors, heat exchangers and process vessels. We adapt our head forming process to specific clad metal combinations.
Structural Detacouple™ and Triclad™ Transition Joints: NobelClad’s structural transition joints permanently join metals without mechanical fasteners. Shipbuilders turn to us to connect superstructures and bulkheads to steel hulls, framing and deck components.
ETJ2000™, ETJ 2001™ and ETJ 3000™: NobelClad’s electrical transition joints offer strong, low electrical resistance solutions for aluminum and zinc smelting, when anode clad and cathode applications must operate at elevated temperatures.
Cylindra™ Cryogenic Transition Joints: Compared with bolted connection systems, Cylindra™ offers an easier, more reliable way to connect stainless steel to aluminum pipes for producing LNG and industrial gases in Air Separation Units.
DetaPipe™ Spools, Elbows and Branches: NobelClad develops reactive metal pipe spools and elbows for piping systems in demanding high-pressure and high-temperature processes. This new technology allows end users to benefit from the corrosion resistance performance and process safety that metals like zirconium, titanium and tantalum provide.
Suppliers and Raw Materials
NobelClad’s operations involve a range of alloys, steels and other materials, such as stainless steel, copper alloys, nickel alloys, titanium, zirconium, tantalum, aluminum and other metals. NobelClad sources its raw materials from a number of different producers and suppliers. It holds a limited metal inventory and purchases its raw materials based on contract specifications. Under most contracts, any raw material price increases are passed on to NobelClad’s customers. NobelClad closely monitors the quality of its supplies and inspects the type, dimensions, markings, and certification of all incoming metals to ensure that the materials will satisfy applicable construction codes. NobelClad sources its metals from top global manufacturers and distributors. In the U.S., NobelClad manufactures its own explosives from standard raw materials sourced from a qualified supplier in Europe.
Competition
Hot Roll Bonding and Weld Overlay. NobelClad faces competition from two primary alternative cladding technologies: hot roll bonding and weld overlay. These technologies do not always compete directly, as each has applications that are better suited, relating to the metals used and thicknesses required. However, specific project considerations such as technical specifications, price and delivery time allow these technologies to compete directly with explosion-welding. In the roll bond process, the clad metal and base metal are bonded during the hot rolling operation in which the metal slab is converted to plate. The weld overlay process is used by many vessel fabricators that are often also NobelClad customers. In weld overlay cladding, the clad metal layer is deposited on the base metal using arc-welding type processes.
Explosion-Welded Metal Cladding. Competition in the explosion-welded clad metal business is global, and we believe that NobelClad holds a premium market position in the industry. Within North America, NobelClad is one of the largest producers of explosion-welded clad products. In Europe, its manufacturing capacity gives NobelClad a strong position against competitors. In Asia, NobelClad has mixed competition ranging from competitors with strong brand names and competitive technology to other producers that are technically limited and offer minimal exports outside of their domestic markets. To remain competitive, NobelClad intends to continue developing and providing technologically advanced manufacturing services, maintaining quality levels, offering flexible delivery schedules, delivering finished products on a reliable basis and competing favorably on the basis of price.
Customer Profile
NobelClad’s customers can be divided into three tiers: the product end users (e.g., operators of chemical processing plants, and aluminum smelting plants), the engineering contractors that design and construct plants for end users, and the metal fabricators that manufacture the products or equipment that utilize NobelClad’s metal products. It is typically the fabricator that places the purchase order with NobelClad and pays the corresponding invoice. NobelClad has developed strong relationships over the years with the engineering contractors, process licensors, and equipment operating companies that frequently act as buying agents for fabricators.
9
Marketing, Sales, Distribution
NobelClad conducts its selling efforts by marketing its services to potential customers’ senior management, direct sales personnel, program managers, and independent sales representatives. Prospective customers in specific industries are identified through networking in the industry, cooperative relationships with suppliers, public relations, customer references, inquiries from technical articles and seminars, website inquiries, webinars, and trade shows. NobelClad’s sales office in the United States covers both North and South America. Its sales offices in Europe cover the full European continent, Africa, the Middle East, and India. NobelClad also has a sales office in South Korea and China to address the Asian markets and uses contract agents to cover various other countries. Contract agents typically work under multi-year agreements which are subject to sales performance targets as well as compliance with NobelClad quality, customer service and compliance expectations. By maintaining relationships with its existing customers, developing new relationships with prospective customers, and educating its customers as to the technical benefits of NobelClad’s products, NobelClad strives to assist in setting standard specifications, both by our customers and the American Society of Mechanical Engineers and ASTM International, to ensure the highest quality and reliability are achieved.
NobelClad’s products are generally shipped from its manufacturing locations in the United States and Germany. Any shipping costs or duties for which NobelClad is responsible will typically be included in the price paid by the customer. Regardless of where the sale is booked, NobelClad will produce it, capacity permitting, at the location closest to the delivery place. If there is a capacity issue at one facility, NobelClad can produce the order at its other production site, prioritizing timing. The two production sites allow NobelClad to meet customer production needs in a timely manner.
Research and Development
NobelClad prepares a formal research and development plan annually. It is supervised by a technical committee that reviews progress quarterly and meets once a year to establish the plan for the following 12 months. Research and development projects may address process support, new products, new applications, new technologies such as additive manufacturing, and special customer-paid or co-sponsored projects.
Corporate History and Recent Developments
The Company originated as an unincorporated business called “Explosive Fabricators,” which was formed in Colorado in 1965. The business was incorporated in Colorado in 1971 under the name “E. F. Industries, Inc.,” which was later changed to “Explosive Fabricators, Inc.” The Company became publicly traded in 1976. In 1994, the Company changed its name to “Dynamic Materials Corporation.” The Company reincorporated in Delaware in 1997.
In 2001, the Company acquired substantially all of the stock of NobelClad Europe SA, a French company (“NobelClad Europe”), which expanded the Company’s explosive metalworking operations to Europe.
In 2007, the Company acquired the German company DynaEnergetics GmbH and Co. KG (“DynaEnergetics”) and certain affiliates, which expanded the Company’s explosive metalworking operations in Europe and added a complementary energy products business.
In 2013, the Company branded its explosive metalworking operations under the single name NobelClad, and in 2014, the Company re-branded the energy products segment as DynaEnergetics.
In 2016, the Company changed its name to DMC Global Inc.
In 2021, the Company completed the acquisition of 60% of the membership interests in Arcadia Products. This acquisition diversified the markets and industries in which we operate and dramatically expanded our addressable markets.
In January 2024, the Company announced that the Board initiated a review of strategic alternatives for the DynaEnergetics and NobelClad businesses to maximize value for shareholders and other stakeholders. In October 2024, the Company announced that the Board was no longer actively marketing the DynaEnergetics and NobelClad segments.
Human Capital
DMC empowers its people and organizations by institutionalizing entrepreneurship and celebrating ingenuity. We stand behind our businesses in ways that truly add value. Our culture is based on four core values: Integrity, Courage, Teamwork, and Humility, which are embedded into our operating strategies.
10
DMC’s human capital resources and programs are managed by its Human Resources department, with support from business leaders across the Company. DMC’s senior management team plays a key role in setting and monitoring culture, values, and broader human capital management practices, with oversight by the Board.
Employee Base. As of December 31, 2025, we employed approximately 1,500 employees, of which 1,300 employees are located inside the U.S. and 200 are located internationally. The majority of our employees are engaged in manufacturing operations, with the remainder primarily in sales, marketing and administrative functions. None of our U.S. manufacturing employees are part of a labor union. In addition, we use a number of temporary workers at any given time, depending on workload at our businesses.
Compensation and Benefits. Our compensation and benefits teams regularly evaluate our comprehensive benefits program, and we strive to develop and implement policies and programs that are fair to employees, support our business goals, maintain competitiveness, and promote shared fiscal responsibility among DMC and our employees. We offer employees benefits that vary by country and are designed to promote employee well-being, meet or exceed the requirements of local laws, and be competitive in the marketplace. Examples of benefits offered in the U.S. include traditional and Roth 401(k) plans with matching employer contributions; health benefits; life and disability insurance; additional voluntary insurance; paid counseling assistance; paid time off and parental leave.
Health and Safety. The health and safety of our employees is fundamental to our success. We focus on the health and safety of our employees and engage various processes and programs to identify and manage risks through recognition, evaluation, and education. We empower our employees by fostering a sense of responsibility for managing their own work environment through open communication and training. Our occupational health and safety management system is designed to foster a robust safety culture, stringent risk management and effective leadership.
Respect For All People. We strive to maintain a culture that values and respects every individual. We believe that a broad range of perspectives drives innovation and empowers employees to excel, helping us achieve our business objectives. Our approach includes creating an environment where our employees feel supported and providing equal opportunities for all of our employees.
Employee Development. DMC is committed to recognizing top talent and fostering career growth within the organization. We seek to maximize the potential of our employees through learning and development initiatives. We believe that investing in skill enhancement is essential to driving engagement and supporting long-term retention.
Ethics. All employees, including senior management and the Board, are required to conduct themselves in accordance with professional and ethical standards, informed by a robust Code of Ethics and Business Conduct (the “Code”). We are committed to ensuring a work environment in which all employees are treated with dignity and respect. We have strict policies to protect against unlawful discrimination and harassment, and a Compliance Hotline that provides an alternative and anonymous method of reporting suspected violations of the Code, DMC’s corporate policies or applicable laws.
Government Regulations
DMC is subject to numerous environmental, legal and other governmental and regulatory requirements related to its operations worldwide. For additional details, see “Item 1A. Risk Factors—Legal and Regulatory Risks”, which is incorporated by reference in this Item 1.
Insurance
Our operations expose us to potential liabilities for property damage and personal injury or death as a result of the failure of a component that has been designed, manufactured, serviced, processed, or distributed by us. On an annual basis, we re-evaluate the purchase of insurance, coverage limits and deductibles. Currently, our insurance program includes, among other things, general liability, umbrella liability, personal property, vehicle, workers’ compensation, and employer’s liability coverage. We maintain coverage that we believe is prudent based on known risks and estimated loss potential, and we believe our insurance program is adequate for our business operations.
Intellectual Property
We hold a variety of intellectual property through our businesses including but not limited to patents, patent applications, registered and unregistered trademarks, trade secrets, proprietary information and know-how. We have followed a policy of
11
seeking patent and trademark protection in countries and regions throughout the world for products and methods that appear to have commercial significance.
No single patent or trademark is considered to be critical to any of Arcadia Products’, DynaEnergetics’, or NobelClad’s operations.
We are careful in protecting our proprietary know-how and manufacturing expertise in Arcadia Products, DynaEnergetics, and NobelClad, and each business unit has implemented measures and procedures designed to ensure that the information remains confidential.
Foreign and Domestic Operations and Export Sales
All sales are shipped from our manufacturing facilities and distribution centers located in the United States, Germany, and Canada. The following table presents our net sales based on the geographic destination of our shipment.
| (Dollars in Thousands) | |||||||||||||||||
| For the years ended December 31, | |||||||||||||||||
| 2025 | 2024 | 2023 | |||||||||||||||
| United States | $ | 492,433 | $ | 521,152 | $ | 597,324 | |||||||||||
| Canada | 21,694 | 32,443 | 30,992 | ||||||||||||||
| Germany | 18,500 | 10,150 | 5,713 | ||||||||||||||
| United Arab Emirates | 6,091 | 3,788 | 9,227 | ||||||||||||||
| Kuwait | 4,837 | 5,945 | 4,980 | ||||||||||||||
| Oman | 4,566 | 7,554 | 7,949 | ||||||||||||||
| Indonesia | 4,292 | 2,687 | 2,622 | ||||||||||||||
| South Korea | 4,281 | 850 | 4,562 | ||||||||||||||
| Egypt | 3,919 | 3,409 | 2,340 | ||||||||||||||
| China | 3,886 | 4,689 | 6,438 | ||||||||||||||
| Saudi Arabia | 3,393 | 5,316 | 4,252 | ||||||||||||||
| Ukraine | 3,304 | 3,975 | 2,332 | ||||||||||||||
| Belgium | 3,166 | 637 | 2,009 | ||||||||||||||
| Turkmenistan | 2,978 | 8 | 1,454 | ||||||||||||||
| France | 2,827 | 2,734 | 3,035 | ||||||||||||||
| Netherlands | 2,577 | 3,384 | 2,146 | ||||||||||||||
| Pakistan | 2,100 | 2,435 | 953 | ||||||||||||||
| India | 2,013 | 7,370 | 2,486 | ||||||||||||||
| Algeria | 1,935 | 1,929 | 1,429 | ||||||||||||||
| Bahrain | 1,864 | 2,892 | 1,277 | ||||||||||||||
| Turkey | 1,860 | 1,820 | 1,258 | ||||||||||||||
| Sweden | 1,819 | 673 | 2,014 | ||||||||||||||
| Iraq | 1,475 | 510 | 6,034 | ||||||||||||||
| Australia | 1,466 | 1,386 | 1,866 | ||||||||||||||
| Thailand | 1,391 | 1,153 | 580 | ||||||||||||||
| South Africa | 1,099 | 1,317 | 1,154 | ||||||||||||||
| Romania | 1,085 | 1,178 | 1,121 | ||||||||||||||
| Malaysia | 1,054 | 839 | 372 | ||||||||||||||
| Rest of the world | 7,935 | 10,628 | 11,269 | ||||||||||||||
| Net sales | $ | 609,840 | $ | 642,851 | $ | 719,188 | |||||||||||
12
Company Information
We are subject to the informational requirements of the Securities Exchange Act of 1934, as amended (the “Exchange Act”). We therefore file periodic reports, proxy statements and other information with the Securities Exchange Commission (the “SEC”). The SEC maintains an Internet site at www.sec.gov that contains reports, proxy and information statements and other information regarding issuers that file electronically.
Our Internet address is www.dmcglobal.com. Information contained on our website does not constitute part of this Form 10-K. Our annual report on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K, and all amendments to those reports filed or furnished pursuant to Section 13(a) or 15(d) of the Exchange Act are available free of charge on our website as soon as reasonably practicable after such material is electronically filed with, or furnished to, the SEC. We also regularly post information about our Company on our website under the “Investors” tab.
ITEM 1A. Risk Factors
Please carefully consider the following discussion of material factors, events, and uncertainties that make our business and an investment in our securities subject to risk. The events and consequences discussed in these risk factors could, in circumstances we may or may not be able to accurately predict, recognize, or control, have a material adverse effect on our business, growth, reputation, prospects, financial condition, operating results (including components of our financial results), cash flows, liquidity, and stock price. These risk factors do not identify all risks that we face; our operations could also be affected by factors, events, or uncertainties that are not presently known to us or that we currently do not consider to present significant risks to our operations.
Summary of Principal Risk Factors
The following is a summary of the principal risk factors that could adversely affect our business, financial condition, and results of operations. This summary should be read together with the more detailed descriptions of risks relating to our Company below.
Risk Factors Related to Arcadia Products
•North American and global economic and industry-related business conditions materially affect our sales and results of operations.
•We may not be able to continue to compete successfully against other companies in our industry.
•If we are unable to manage our supply chain effectively, including availability and price of materials used in our products, our results of operations will be negatively affected.
•An inability to successfully develop new products or improve existing products could negatively impact our ability to attract new customers and/or retain existing customers.
•Product quality issues and product liability claims could adversely affect our operating results.
Risk Factors Related to DynaEnergetics
•Demand for DynaEnergetics’ products is substantially dependent on the levels of capital expenditures by the oil and gas industry. Decreases or expected decreases in oil and gas prices and reduced expenditures in the oil and gas industry could have a material adverse effect on our financial condition, results of operations and cash flows.
•Customer concentration or consolidation of our customers and competitors may impact our results of operations.
•Failure to adjust our manufacturing and supply chain to accurately meet customer demands could have a material adverse effect on our results of operations.
•Failure to manage periods of growth or contraction may seriously harm our business.
•We may not be able to continue to compete successfully against other companies in our industry.
Risk Factors Related to NobelClad
•NobelClad’s business is dependent on sales to a limited number of customers in cyclical markets and our results are affected by the price of metals.
•We are dependent on a relatively small number of large projects and customers for a significant portion of our net sales.
•Our backlog figures may not accurately predict future sales.
•There is a limited availability of sites suitable for cladding operations.
•There is no assurance that we will continue to compete successfully against other manufacturers of competitive products.
•Our costs could substantially increase if we experience a large claim or a significant number of warranty claims.
13
Risk Factors Related to our Businesses Generally
•Our efforts to grow and transform our businesses may require significant investments; if our strategies are unsuccessful, our business, results of operations and/or financial condition may be materially adversely affected.
•Our operations are subject to political and economic instability and risk of government actions that could have a material adverse effect on our business, consolidated results of operations, and consolidated financial condition.
•Inflation and elevated interest rates have, and may continue to, adversely affect our financial position and results of operations.
•Our business, financial condition and results of operations could be adversely affected by disruptions in the global and European economies caused by the ongoing conflict between Russia and Ukraine and instability in the Middle East.
•Our operating results fluctuate from quarter to quarter.
•We are exposed to potentially volatile fluctuations of the U.S. dollar (our reporting currency) against the currencies of many of our operating subsidiaries.
•Disruptions or delays involving our suppliers or increases in prices for the components, raw materials and parts that we obtain from our suppliers could have a material adverse effect on our business and consolidated results of operations.
•The terms of our indebtedness contain a number of restrictive covenants, the breach of any of which could result in acceleration of payment of our credit facilities.
•If our customers delay paying or fail to pay a significant amount of our outstanding receivables, it could have a material adverse effect on our liquidity, consolidated results of operations, and consolidated financial condition.
•New or existing tariffs and other trade measures could adversely affect our results of operations, financial position and cash flows.
•Failure to attract and retain key personnel and source sufficient labor could adversely affect our current operating results.
•Changes in immigration laws or enforcement programs could adversely affect our business.
•A failure in our information technology systems or those of third parties, including those caused by security breaches, cyber-attacks or data protection failures, could disrupt our business, result in significant legal costs and other losses and damage our reputation.
•Artificial intelligence presents risks and challenges that could adversely affect our business.
•Failure to establish and maintain adequate internal controls over financial reporting could result in the inability to report our financial results in a timely and reliable manner, which could harm our business and impact the value of our securities.
Legal and Regulatory Risks
•Our operations require us to comply with numerous laws and regulations, violations of which could have a material adverse effect on our consolidated results of operations, financial condition or cash flows.
•The use of explosives in our DynaEnergetics and NobelClad manufacturing processes and products subject us to additional environmental, health and safety laws and any accidents or injuries could subject us to significant liabilities.
•Demand for our products could be reduced by existing and future legislation, regulations and public sentiment.
•We are subject to extensive environmental, health and safety laws and failure to comply with such laws and regulations could result in restrictions or prohibitions on our facilities, substantial civil or criminal liabilities and could have a material adverse effect on our business, consolidated results of operations, and consolidated financial condition.
•Failure to comply with applicable federal, state and local employment and labor laws and regulations could have a material, adverse impact on our business.
•The regulatory environment governing information, data security and privacy is increasingly demanding and evolving and a data security breach could result in litigation, enforcement actions and related penalties and fines.
Intellectual Property Risks
•Our failure to protect our proprietary information and any successful intellectual property challenges against us could materially and adversely affect our competitive position.
•We may incur substantial costs defending against third parties alleging that we infringe their proprietary rights.
Risks Related to Acquisitions
•We have incurred debt to finance the acquisition of 60% of Arcadia Products and may incur additional substantial financial obligations in connection with the acquisition of the remaining 40% of Arcadia Products.
•DMC is the majority shareholder of Arcadia Products, and our interest in Arcadia Products is subject to the risks normally associated with the conduct of businesses with a minority shareholder.
•To the extent that we seek to further expand our business through acquisitions, we may experience issues in executing acquisitions or integrating acquired operations.
14
Risk Factors Related to Our Common Stock
•The price and trading volume of our common stock has been and may continue to be volatile, which may make it difficult for investors to resell the common stock at attractive timing or pricing.
•Our business could be negatively affected as a result of actions of activist stockholders or others.
•Our stockholder protection rights agreement includes terms and conditions that could discourage a takeover or other transaction that stockholders may consider favorable.
•Future sales of our common stock in the public market or the issuance of equity securities, including in connection with an exercise of the Put Option, could dilute our existing stockholders and adversely affect the trading price of our common stock and our ability to raise funds in future equity offerings.
Risk Factors Related to Arcadia Products
North American and global economic and industry-related business conditions materially affect our sales and results of operations.
Our Arcadia Products business is significantly influenced by North American economic conditions and the cyclical nature of the North American commercial and residential construction industry. The construction industry is impacted by macroeconomic trends, such as availability of credit, employment levels, consumer confidence, interest rates and commodity prices. Continued inflationary pressure, a high-interest rate environment, and rising construction costs have reduced, and could continue to reduce, the demand for our products and impact our profitability. Elevated interest rates make it more expensive to finance construction projects, and as a result, may reduce the demand for our products. In addition, changes in architectural design trends, demographic trends, and/or remote work trends could negatively impact demand for our products. To the extent changes in these factors negatively impact the overall commercial construction industry, our revenue and profits could be significantly reduced.
We may not be able to continue to compete successfully against other companies in our industry.
The markets in which Arcadia Products operates are highly competitive and many of our competitors are larger and better capitalized than we are. These competitors may be better able to withstand changes in conditions within the industries and markets in which we operate and may have significantly greater operating and financial flexibility than we have. Moreover, barriers to entry are low in certain product lines and new competitors may enter our industry, whether within the U.S. or internationally. An increase in competition, including in the form of aggressive pricing by new market entrants or offerings of alternative building materials, could cause us to lose customers and lead to decreases in net sales and profitability if we are not able to respond adequately to such challenges. The actions of our existing competitors or new competitors could result in loss of customers and/or market share. Changes in our competitors’ products, prices or services could negatively impact our market share, net sales and/or margins.
If we are unable to manage our supply chain effectively, including availability and price of materials used in our products, our results of operations will be negatively affected.
We obtain a significant portion of our key raw materials, such as aluminum extrusions, from a few key suppliers. While we structure many of our supply arrangements to moderate the effects of fluctuations in the market for raw aluminum and we endeavor to adjust our customer pricing to offset potential impacts, operating results could be negatively impacted by price movements in the market for raw aluminum. In recent years, we have seen increased volatility in the price of aluminum that we purchase from our key suppliers.
Our suppliers are subject to fluctuations in general economic cycles. Global economic conditions and political and economic instability may impact their ability to operate their businesses, including the ongoing conflict between Russia and Ukraine, unrest in the Middle East, and related government actions. Some of our suppliers have been and may continue to be negatively impacted by the costs or availability of raw materials, labor and transportation, and they may not be able to handle commodity cost volatility or changing volumes while still performing up to our specifications. These factors may cause suppliers to be unable to meet their commitments or to negatively change the terms of supply arrangements.
The loss of, or substantial decrease in the availability of, products from our suppliers, or the loss of a key supplier, could adversely impact our financial condition and results of operations. If any of our key suppliers are unable to meet their commitments, or if those supply arrangements are terminated, we may not be able to obtain certain raw materials on commercially reasonable terms or at all, and may suffer a significant interruption in our ability to manufacture our products, including because it may be difficult to find substitute or alternate suppliers as the aluminum extrusions we use are customized.
15
We could also be required to maintain higher inventory levels as we address supply uncertainties. Such developments would result in higher costs and potentially a decrease in our revenues and profitability. If our supply of raw materials is disrupted or our delivery times are extended, our results of operations and financial condition could be materially adversely affected.
An inability to successfully develop new products or improve existing products could negatively impact our ability to attract new customers and/or retain existing customers.
Our success depends on meeting consumer needs and anticipating changes in consumer preferences with successful new products and product improvements. We aim to introduce products and new product designs proactively to offset obsolescence and decreases in sales of existing products. While we devote significant focus to the development of new products, we may not be successful in product development and our new products may not be commercially successful. In addition, it is possible that competitors may improve their products more rapidly or effectively, which could adversely affect our sales. Furthermore, market demand may decline as a result of consumer preferences trending away from our categories or trending down within our brands or product categories, which could adversely impact our results of operations, cash flows and financial condition.
Product quality issues and product liability claims could adversely affect our operating results.
We believe that future orders of our products will depend on our ability to maintain the performance, reliability, quality and timely delivery standards required by our customers. We have in the past been and currently are subject to product liability and warranty claims. If our products have performance, reliability or quality problems, or products are installed improperly, we may experience additional warranty expense; reduced or canceled orders; or delays in the collection of accounts receivable. Additionally, product liability and warranty claims could result in costly and time-consuming litigation that could require significant time and attention of management and involve significant monetary damages that could negatively impact our operating results. There is no assurance that the number and value of product liability and warranty claims will not increase as compared to historical claim rates, or that our warranty reserve at any particular time will be sufficient. No assurance can be given that coverage under insurance policies, if applicable, will be adequate to cover future product liability claims against us. If we are unable to recover on insurance claims, in whole or in part, or if we exhaust our available insurance coverage at some point in the future, then we might be forced to expend legal fees and settlement or judgment costs relating to product liability and warranty claims, which could negatively impact our profitability, results of operations, cash flows and financial condition.
Risk Factors Related to DynaEnergetics
Demand for DynaEnergetics’ products is substantially dependent on the levels of capital expenditures by the oil and gas industry. Decreases or expected decreases in oil and gas prices and reduced expenditures in the oil and gas industry could have a material adverse effect on our financial condition, results of operations and cash flows.
Demand for the majority of DynaEnergetics’ products depends substantially on the level of expenditures by the oil and gas industry for the exploration, development and production of oil and natural gas reserves. These expenditures are generally dependent on the industry’s view of future oil and natural gas prices and are sensitive to the industry’s view of future economic growth and the resulting impact on demand for oil and natural gas. Industry consolidation and increased costs have caused E&P companies to decrease investment in U.S. land-based drilling, completion, and production activities. This decreased investment, combined with ongoing uncertainty regarding future crude oil demand, has resulted in competitive pressures and reduced the prices we can charge for our products. In addition, the oil and gas industry has historically been cyclical, and to date in 2026, oil prices have declined significantly from their 2022 highs. When oil prices decline, we would expect an increased risk of reduced or delayed oil and gas exploration and production spending, project modifications, delays or cancellations, general business disruptions, and delays in payment of, or nonpayment of, amounts that are owed to us, all of which could result in reduced demand for our products, downward pressure on selling prices for our products and decreased revenues and profits. These effects would likely have a material adverse effect on our financial condition, results of operations and cash flows.
The prices for oil and natural gas have historically been volatile and can be affected by a variety of factors, including:
•changes in the supply of and demand for hydrocarbons, which are affected by general economic, business and regulatory conditions;
•the ability or willingness of the Organization of Petroleum Exporting Countries (“OPEC”) and other oil producing companies to set and maintain production levels for oil;
•oil and gas production levels in the U.S. and in other non-OPEC countries;
•the level of excess production capacity;
•speculation as to the future price of oil and the speculative trading of oil and natural gas futures contracts;
16
•government initiatives to restrict oil and gas drilling or development or promote the use of renewable energy sources and public sentiment regarding the same;
•political and economic uncertainty, geopolitical unrest, and acts of war;
•the level of worldwide oil and gas exploration and production activity;
•access to potential resources;
•changes in governmental policies, subsidies, sanctions, and tariffs;
•the costs of exploring for, producing and delivering oil and gas;
•technological advances affecting energy consumption; and
•weather conditions, natural disasters, and pandemics or epidemics.
Continued or worsening conditions in the oil and gas industry generally may have a further material adverse effect on our business, financial condition, results of operations, cash flows and prospects.
Customer concentration or consolidation of our customers and competitors may impact our results of operations.
The oil and gas industry has historically experienced periods of consolidation which may result in reduced capital spending by some of our customers, the acquisition of one or more of our primary customers, or competitors and consolidated entities using size and purchasing power to seek pricing or other concessions, which may lead to decreased demand or pricing for our products. We are continuing to experience significant customer concentration and customer consolidation, resulting in certain customers having substantial negotiating leverage, which has negatively impacted our pricing, margins and profitability, as well as increasing accounts receivable concentration among fewer customers. During the year ended December 31, 2025, one DynaEnergetics customer accounted for approximately 26% of consolidated net sales of the Company. In addition, recent, ongoing and future mergers, combinations and consolidations in our industry could result in existing competitors increasing their market share. As a result, industry consolidation may have a significant negative impact on our results of operations, financial position or cash flows.
Failure to adjust our manufacturing and supply chain to accurately meet customer demands could have a material adverse effect on our results of operations.
We make significant decisions, including determining the levels of business that we will seek and accept, production schedules, levels of reliance on contract manufacturing and outsourcing, internal fabrication utilization and other resource requirements, based on our estimates of customer requirements. Factors that can impact our ability to accurately estimate future customer requirements include the short-term nature of many customers’ commitments, our customers’ ability to reschedule, cancel and modify orders with little or no notice and without significant penalty, the accuracy of our customers’ forecasts, and seasonal or cyclical trends in customers’ industries.
To ensure availability of our products, particularly for our largest customers, we may start manufacturing our relevant products based on our customers’ forecasts, which are not binding. As a result, we incur inventory and manufacturing costs in advance of anticipated sales that may never materialize or which may be substantially lower than expected. If actual demand for our products is lower than forecast, we may also experience higher inventory carrying and operating costs and product obsolescence. Because certain of our sales, research and development, and internal manufacturing overhead expenses are relatively fixed, a reduction in customer demand may also decrease our gross margin and operating income.
Conversely, customers often require rapid increases in production on short notice. We may be unable to secure sufficient materials or contract manufacturing capacity to meet such increases in demand. This could damage our customer relationships, reduce revenue growth and margins, subject us to additional liabilities, harm our reputation, and prevent us from taking advantage of opportunities.
Failure to manage periods of growth or contraction may seriously harm our business.
Our industry frequently sees periods of expansion and contraction which require companies to adjust to customers’ needs and market demands. We regularly contend with these issues and must carefully manage our business to meet customer and market requirements. If we fail to manage these growth and contraction decisions effectively, we may find ourselves with either excess or insufficient resources and our business and our profitability could suffer as a result.
Periods of contraction or reduced net sales, or other factors negatively affecting particular markets, require us to assess whether facilities remain viable, whether staffing levels need to be reduced, and how to respond to changing levels of customer demand. While maintaining excess capacity or higher levels of employment entails short-term costs, reductions in capacity or employment could impair our ability to respond to new opportunities and programs, market improvements or to maintain
17
customer relationships. Our decisions to reduce costs and capacity can affect our short-term and long-term results and result in restructuring charges.
Expansions, including the transfer of operations to other facilities, include the risk of additional costs and start-up inefficiencies. If we are unable to effectively manage our expansion projects or related anticipated net sales are not realized, our operating results could be materially adversely affected.
We may not be able to continue to compete successfully against other companies in our industry.
The markets in which we operate are highly competitive. DynaEnergetics competes with a broad spectrum of companies that produce and market perforating services and products. Many of these companies are large national and multi-national companies, including the oil and natural gas industry’s largest oilfield service providers. These companies have longer operating histories, greater financial, technical, and other resources, and greater name recognition than we do. In addition, we compete with many smaller companies capable of competing effectively on a regional or local basis. Our competitors may be able to respond more quickly to new or emerging technologies and changes in customer requirements. To remain competitive, DynaEnergetics must continue to provide innovative products at competitive prices and maintain an excellent reputation for value, quality, on-time delivery, and safety. If we fail to compete successfully against our competition, we may be unable to maintain acceptable sales levels, prices and margins for our products, which could have a material adverse effect on our business, financial condition, and results of operations.
If we are not able to design, develop, and produce commercially competitive products in a timely manner in response to changes in the market, customer requirements, competitive pressures, and technology trends, our business and consolidated results of operations and the value of our intellectual property could be materially and adversely affected.
The market for our products is characterized by continual technological developments to provide better and more reliable performance and enhanced product offerings. If we are not able to design, develop, and produce commercially competitive products in a timely manner in response to changes in the market, customer requirements, competitive pressures, and technology trends, our business and consolidated results of operations and the value of our intellectual property could be materially and adversely affected. Likewise, if our proprietary technologies, equipment, facilities, or work processes become obsolete, we may no longer be competitive, and our business and consolidated results of operations could be materially and adversely affected.
We may be unable to successfully execute and realize the expected financial benefits from strategic initiatives.
From time to time, our business has engaged in strategic initiatives, and such activities may occur in the future. These efforts have included a series of automation, lean manufacturing and cost-reduction initiatives designed to enhance profitability and improve quality. We may not realize the full benefits expected within the anticipated timeframe. Adverse effects from strategy-driven organizational changes could interfere with our realization of anticipated synergies, customer service improvements and cost savings from these strategic initiatives. Additionally, our ability to fully realize the benefits and implement strategic initiatives may be limited by certain contractual commitments. Moreover, we may incur substantial expenses in connection with the execution of strategic plans in excess of what is forecasted. Further, strategic initiatives can be a complex and time-consuming process that can place substantial demands on management, which could divert attention from other business priorities or disrupt our daily operations. Any of these failures could materially adversely affect our business, financial condition, results of operations and cash flows, which could constrain our liquidity.
Demand for DynaEnergetics’ products could be reduced by existing and future legislation, regulations and public sentiment.
Regulatory agencies and environmental advocacy groups in the United States, the E.U., and other regions or countries have been focusing considerable attention on emissions of carbon dioxide, methane and other greenhouse gases and their role in climate change. There is also increased focus, including by governments and our customers, investors and other stakeholders, on these and other sustainability and energy transition matters. Existing or future legislation and regulations related to greenhouse gas emissions and climate change, as well as initiatives by governments, non-governmental organizations, and companies to conserve energy or promote the use of alternative energy sources, and negative attitudes toward or perceptions of fossil fuel products and their relationship to the environment, may significantly curtail demand for and production of oil and gas in areas of the world where our customers operate, and thus reduce future demand for DynaEnergetics’ products.
In addition, some international, national, state and local governments and agencies have also adopted laws and regulations or are evaluating proposed legislation and regulations that are focused on directly limiting the extraction of shale
18
gas or oil using hydraulic fracturing. These laws and regulations could limit oil and gas development, lead to operational delays and increased costs for our customers, and therefore reduce demand for DynaEnergetics’ products. Such reductions in demand for our products may, in turn, adversely affect our financial condition, results of operations and cash flows.
Increased negative investor sentiment toward oil and gas and preference for assets outside of traditional energy sectors could lead to higher capital costs for our customers and reduced investment in fossil fuels, thereby reducing demand for our products. Such preferences could also impact our ability to obtain acceptable debt or equity financing on attractive terms or at all and could negatively impact our stock price over time. Our business, reputation and demand for our stock could be negatively affected if we do not (or are perceived to not) act responsibly with respect to sustainability matters.
Risk Factors Related to NobelClad
NobelClad’s business is dependent on sales to a limited number of customers in cyclical markets and our results are affected by the price of metals.
NobelClad revenues are affected by the demand for explosion-welded clad solutions, the base price of metal used in explosion-welded cladding operations and the growing adoption of products and vessels manufactured in China and India. The explosive welding clad market is dependent upon sales of products for use by customers in a limited number of heavy industries, including oil and gas, chemicals and petrochemicals, alternative energy, hydrometallurgy, aluminum production, shipbuilding, rail car manufacturing, power generation, and industrial refrigeration. These industries tend to be cyclical in nature and an economic slowdown in one or all of these industries, whether due to traditional cyclicality, general economic conditions or other industry-specific factors, could impact capital expenditures within that industry.
Metals prices affect the demand for cladded products and our margins, with higher metal prices generally increasing demand for use of cladded materials over solid metals, which leads to higher sales (in terms of dollars rather than square meters of cladding) and generally higher margins for NobelClad. Our business is subject to volatility in metal prices and tariffs. Recent increases in U.S. tariffs on metals, as well as retaliatory measures by other countries or any further changes to global trade policy, have and may continue to adversely affect margins, and disrupt supply chains. Higher material costs may cause customers to delay projects and reduce demand. If demand or supply chain issues or similar disruptions persist, our sales would be adversely affected, and this could have a material adverse effect on our business, financial condition, and results of operations.
We are dependent on a relatively small number of large projects and customers for a significant portion of our net sales.
A significant portion of our net sales is derived from a relatively small number of projects and customers; therefore, the failure to complete existing contracts on a timely basis, to receive payment for such services in a timely manner, or to enter into future contracts at projected volumes and profitability levels could adversely affect our ability to meet cash requirements exclusively through operating activities. We attempt to minimize the risk of losing customers or specific contracts by continually improving commercial execution and product quality, delivering product on time and competing aggressively on the basis of price. Inflationary conditions in many markets have created uncertainty in our end markets, and we have seen delays in projects and capital expenditures. We expect to continue to depend upon our principal customers for a significant portion of our sales, although our principal customers may not continue to purchase products and services from us at current levels, if at all. The loss of one or more major customers or a change in their buying patterns could have a material adverse effect on our business, financial condition, and results of operations.
Our backlog figures may not accurately predict future sales.
We use backlog to predict our anticipated future sales. Our year-end backlog was $62.6 million, $48.9 million, and $59.4 million at the end of fiscal years 2025, 2024, and 2023, respectively. We define “backlog” at any given point in time to consist of all firm, unfulfilled purchase orders and commitments at that time. We expect to fill most items in backlog within the following twelve months. However, since orders may be rescheduled or canceled and a significant portion of our net sales is derived from a small number of customers, backlog is not necessarily indicative of future sales levels. Moreover, we cannot be sure of when during the future twelve-month period we will be able to recognize revenue corresponding to our backlog nor can we be certain that revenues corresponding to our backlog will not fall into periods beyond the twelve-month horizon.
There is a limited availability of sites suitable for cladding operations.
Our cladding process involves the detonation of large amounts of explosives. As a result, the sites where we perform cladding must meet certain criteria, including adequate distance from densely populated areas, specific geological
19
characteristics, and the ability to comply with local noise and vibration abatement regulations in conducting the process. Our cladding sites in Pennsylvania and in Germany are located in mines. Our Pennsylvania cladding site is subleased under an arrangement pursuant to which we provide certain contractual services to the sub-landlord, and this sublease expires in 2054. Our cladding sites require ongoing maintenance and investment, and failure to adequately maintain these sites could result in reduced access or capacity constraints. In addition, we could experience difficulty in obtaining or renewing permits because of resistance from residents in the vicinity of existing or proposed sites. The failure to obtain required governmental approvals or permits could limit our ability to expand our cladding business in the future, and the failure to maintain such permits or satisfy other conditions to use the sites would have a material adverse effect on our business, financial condition and results of operations.
There is no assurance that we will continue to compete successfully against other manufacturers of competitive products.
Our explosion-welded clad products compete on a worldwide basis with explosion-welded clad products made by other manufacturers in the clad metal business and with products manufactured using other technologies. We see competition from large well-known clad suppliers and from a growing number of smaller companies with explosion welded clad manufacturing capability in China and India. Explosion-welded clad products also compete with products manufactured by roll bond and weld overlay cladding processes. The technical and commercial niches of each cladding process are well understood within the industry and vary from one market location to another and at different metal prices. We focus on reliability, product quality, on-time delivery performance, and low-cost manufacturing to minimize the potential of future competitive threats. However, there is no guarantee we will be able to maintain our competitive position.
Customers have the right to change orders until products are completed.
Customers have some rights to change orders after they have been placed. If orders are changed, the extra expenses associated with the change usually will be passed on to the customer. However, because a change in an order may delay completion of the project, recognition of income for the project may also be delayed. Additionally, any errors or changes as to specifications or significant changes in pricing or availability of materials may cause cost overruns and delays in completion of projects. If we fail to meet delivery schedules, we may be required to pay damages or may risk loss of an order, which could have a material adverse effect on our business, financial condition and results of operations.
Our costs could substantially increase if we experience a large claim or a significant number of warranty claims.
Our product warranties against technical defects of our clad products vary depending on our purchase orders with customers. The warranties require us to repair or replace defective products and may require the payment of a certain percentage of the purchase price as liquidated damages for our failure to meet the specified product specifications and delivery requirements. In addition, our clad products are often used as part of larger projects or are used in potentially hazardous and highly regulated applications such as power generation, LNG facilities, spacecraft, and air-compression systems, where failures can have safety, environmental, and operational consequences, including injury or loss of life and damage to property or equipment. In the event of an actual or alleged product defect, we may be named as a defendant in product liability or other lawsuits asserting potentially large claims. Given that such incidents could carry heightened visibility and risk, our potential exposure may be disproportionally significant. We cannot guarantee that insurance will be available or adequate to cover any or all liabilities incurred. We generally have not established any reserve funds for potential warranty claims since historically we have experienced few warranty claims for our products and the costs associated with our warranty claims have been low. If we experience an increase in warranty claims or if our repair and replacement costs associated with warranty claims increase significantly, it could have a material adverse effect on our business, financial condition and results of operations.
Risk Factors Related to our Businesses Generally
Our efforts to grow and transform our businesses may require significant investments; if our strategies are unsuccessful, our business, results of operations and/or financial condition may be materially adversely affected.
We continuously evaluate opportunities for growth and change. These initiatives may involve making acquisitions, entering into partnerships and joint ventures, divesting assets, restructuring our existing operations and assets, creating new financial structures and building new facilities, any of which could require a significant investment and subject us to new risks. We may incur additional indebtedness to finance these opportunities. If our strategies for growth and change are not successful, we could face increased financial pressure, such as increased cash flow demands, reduced liquidity and diminished access to financial markets, and the equity value of our businesses could be diluted.
20
The implementation of strategies for growth and change may create additional risks, including:
•diversion of management’s time and attention away from existing operations;
•requiring capital investment that could otherwise be used for the operation and growth of our existing businesses;
•disruptions to important business relationships;
•increased operating costs;
•limitations imposed by various governmental entities; and
•difficulties due to lack of or limited prior experience in any new markets we may enter.
Our inability to mitigate these risks or other problems encountered in connection with our strategies for growth and change could have a material adverse effect on our business, results of operations and financial condition. In addition, we may fail to fully achieve the savings or growth projected for current or future initiatives notwithstanding the expenditure of substantial resources in pursuit thereof.
Our operations are subject to political and economic instability and risk of government actions that could have a material adverse effect on our business, consolidated results of operations, and consolidated financial condition.
We are exposed to risks inherent in doing business in each of the countries in which we operate. Our operations are subject to various risks unique to each country that could have a material adverse effect on our business, consolidated results of operations, and consolidated financial condition. With respect to any particular country, these risks may include:
•political, social and economic instability;
•civil unrest, acts of terrorism, force majeure, war, or other armed conflict;
•public health crises and catastrophic events;
•inflation;
•currency fluctuations, devaluations, conversion, or repatriation restrictions;
•expropriation and nationalization of our assets;
•confiscatory taxation or other adverse tax policies;
•theft of, or lack of sufficient legal protection for, proprietary technology and other intellectual property;
•limitations on extraction of shale gas or oil using hydraulic fracturing;
•limitations on or disruptions to our markets or operations, restrictions on payments, or limitations on the movement of funds;
•increased tariffs, quotas, duties, or other adverse changes to trade policy;
•economic sanctions or other restrictions;
•unexpected changes in legal and regulatory requirements, including changes in interpretation or enforcement of existing laws;
•deprivation of contract rights; and
•the inability to obtain or retain licenses required for operation.
Inflation and elevated interest rates have, and may continue to, adversely affect our financial position and results of operations.
Our business and financial results could continue to be adversely affected by significant inflation and higher interest rates. During the past three years, the global economy has experienced significant inflationary pressures. Inflation has, and could continue to, adversely affect us by increasing the cost of labor, materials, parts, equipment, transportation and other operational components. This has adversely affected our results of operations, cash flows and financial position by increasing our overall cost structure, and could continue to do so, particularly if we are unable to achieve commensurate increases in the prices we charge our customers for our products.
Although interest rates have moderated from recent highs, they remain elevated, which has increased the cost of debt, investment, and construction costs. Higher interest rates make it more expensive for our customers to finance projects in certain of our business segments, and as a result, may continue to reduce the demand for our products and impact our profitability. Furthermore, higher interest rates decrease cash available for debt repayment as our credit facility bears a variable interest rate.
21
We cannot guarantee that interest rates will be reduced, and continued elevated interest rates will have an adverse effect on our financial position and results of operations.
Our business, financial condition and results of operations could be adversely affected by disruptions in the global and European economies caused by the ongoing conflict between Russia and Ukraine and instability in the Middle East.
In February of 2022, Russian military forces invaded Ukraine, resulting in conflict and disruption in the region. More recently, the outbreak of hostilities between Israel and Hamas has created additional instability in the Middle East. The length, impact and outcome of these ongoing military conflicts is highly unpredictable. These conflicts have also led and may continue to lead to significant market and other disruptions, including significant volatility in commodity prices and supply of energy resources, instability in financial markets, higher inflation, supply chain interruptions, increased costs for transportation and raw materials, political and social instability, as well as an increase in cyberattacks and espionage. Furthermore, governments in the United States, the European Union, the United Kingdom, Canada and others have imposed financial and economic sanctions on certain industry segments and various parties in Russia, and may impose additional restrictions in connection with Middle East conflicts. We continue to monitor these conflicts, including the potential impact of financial and economic sanctions on the global economy and particularly the economies of Europe and the Middle East. Increased trade barriers, sanctions and other restrictions on global or regional trade could adversely affect our business, financial condition and results of operations. Further escalation of geopolitical tensions related to these conflicts and/or their expansion could result in loss of property, expropriation, cyberattacks, supply disruptions, plant closures and an inability to obtain key supplies and materials, as well as adversely affect both our and our customers’ supply chains and logistics, particularly in Europe.
In many cases, both our German operations and those of European customers and suppliers depend on the availability of natural gas for use in their manufacturing operations. A significant proportion of Germany’s natural gas supply has historically originated from Russia. Material disruptions of natural gas supply to Europe, and in particular Germany, whether from sanctions, counter-measures by Russia, other restrictions, damage to infrastructure and logistics or otherwise from the destabilizing effects of military conflict could materially and adversely impact European and global natural gas and oil markets. We expect that shortages in supply and increases in costs of natural gas or other energy will adversely impact our ability to operate our German manufacturing facilities as efficiently and cost-effectively as previously, which could adversely affect our business, results of operations and financial condition.
In addition, conflicts in the Middle East have disrupted both maritime and air transportation. Shipping through the Red Sea and Suez Canal has been curtailed, forcing vessels to reroute around Africa, which increases transit times and costs for our customers in the Middle East and Asia. Recent hostilities involving Iran also disrupted air cargo, with carriers suspending flights or refusing to transport dangerous goods such as our perforating explosives. These disruptions have delayed shipments, increased expenses, and limited our ability to serve customers. Continued instability could materially and adversely affect our operations and financial results.
Our operating results fluctuate from quarter to quarter.
We have experienced, and expect to continue to experience, fluctuations in annual and quarterly operating results caused by various factors impacting our businesses. At NobelClad, quarterly sales and operating results depend on the volume and timing of the orders in our backlog as well as bookings during the quarter. At DynaEnergetics, the level of demand from our customers is impacted by oil and gas prices as well as a variety of other factors and can vary significantly from quarter to quarter. At Arcadia Products, operating results can fluctuate due to price movements in the market for raw aluminum. Portions of our operating expenses are fixed, and planned expenditures are based primarily on sales forecasts and product development programs. If sales do not meet our expectations in any given period, the adverse impact on operating results may be magnified by our inability to adjust operating expenses sufficiently or quickly enough to compensate for such a shortfall. Results of operations in any period should not be considered indicative of the results for any future period.
We are exposed to potentially volatile fluctuations of the U.S. dollar (our reporting currency) against the currencies of many of our operating subsidiaries.
Many of our operating subsidiaries conduct business in euros, Canadian dollars, or other foreign currencies. Sales made in currencies other than U.S. dollars accounted for 10%, 11%, and 9% of total sales for the years ended 2025, 2024, and 2023, respectively. Any increase or decrease in the value of the U.S. dollar against any foreign currency that is the functional currency of any of our operating subsidiaries will cause us to experience foreign currency translation gains or losses with respect to amounts already invested in such foreign currencies. In addition, our company and our operating subsidiaries are exposed to foreign currency risk to the extent that we or they enter into transactions denominated in currencies other than our or their respective functional currencies. For example, DynaEnergetics Europe’s functional currency is euros, but its sales often occur in
22
U.S. dollars. Changes in exchange rates with respect to these items will result in unrealized (based upon period-end exchange rates) or realized foreign currency transaction gains and losses upon settlement of the transactions. In addition, we are exposed to foreign exchange rate fluctuations related to our operating subsidiaries’ assets and liabilities and to the financial results of foreign subsidiaries and affiliates when their respective financial statements are translated into U.S. dollars for inclusion in our Consolidated Financial Statements. Cumulative translation adjustments are recorded in other cumulative comprehensive loss as a separate component of equity. Our primary exposure to foreign currency risk is the euro, due to the percentage of our U.S. dollar revenue that is derived from countries where the euro is the functional currency. We use foreign currency forward contracts, generally with maturities of one month, to offset foreign exchange rate fluctuations on certain foreign currency denominated asset and liability account balances. These hedge transactions relate to our operating entities with significant economic exposure to transactions denominated in currencies other than their functional currency. Our primary economic exposures include the U.S. dollar to the euro, the U.S. dollar to the Canadian dollar, and the euro to the U.S. dollar. Since the underlying balance sheet account balances being hedged can fluctuate significantly throughout our monthly hedge periods, our hedging program cannot fully protect against foreign currency fluctuations.
Disruptions or delays involving our suppliers or increases in prices for the components, raw materials and parts that we obtain from our suppliers could have a material adverse effect on our business and consolidated results of operations.
Our operations are dependent upon the continued ability of our suppliers to deliver the components, raw materials and parts that we need to manufacture our products. In some instances, we purchase components, raw materials and parts that are ultimately derived from a single source and may be at an increased risk for supply disruptions. Any number of factors, including labor disruptions, acts of war or terrorism, military activity, civil unrest, trade sanctions, catastrophic weather events, the occurrence of a pandemic or other widespread illness, contractual or other disputes, unfavorable economic or industry conditions, transportation disruptions, delivery delays or other performance problems or financial difficulties or solvency problems, could disrupt our suppliers’ operations and performance, which could, in turn, lead to uncertainty in our supply chain or cause supply disruptions for us and disrupt our operations. If we experience supply disruptions, we may not be able to develop alternate sourcing quickly. Any disruption of our production schedule caused by an unexpected shortage of components, raw materials or parts even for a relatively short period of time could cause us to alter production schedules or suspend production entirely, which would adversely affect our business and results of operations.
The terms of our indebtedness contain a number of restrictive covenants, the breach of any of which could result in acceleration of payment of our credit facilities.
As of December 31, 2025, we had an outstanding balance of $52.0 million on our syndicated credit agreement, which was amended on February 6, 2024, and June 10, 2025. This agreement, as amended, includes various covenants and restrictions and certain of these relate to the incurrence of additional indebtedness and the mortgaging, pledging or disposing of major assets. We are also required to maintain certain financial ratios on a quarterly basis. A breach of any of these covenants could impair our ability to borrow and could result in acceleration of our obligations to repay our debt if we are unable to obtain a waiver or amendment from our lenders. As of December 31, 2025, we were in compliance with all financial covenants and other provisions of the credit agreement, as amended, and our other loan agreements. Any failure to remain in compliance with any material provision or covenant of our credit agreement could result in a default, which would, absent a waiver or amendment, require immediate repayment of outstanding indebtedness under our credit facilities. We may not have or be able to obtain sufficient funds to satisfy such a repayment obligation.
If our customers delay paying or fail to pay a significant amount of our outstanding receivables, it could have a material adverse effect on our liquidity, consolidated results of operations, and consolidated financial condition.
We depend on a limited number of significant customers in our DynaEnergetics and NobelClad businesses, and the loss of one or more significant customers or the failure of a customer to pay outstanding amounts due could have a material adverse effect on our business and our consolidated results of operations. In most cases, we bill our customers for our services in arrears and are, therefore, subject to the risk that our customers will delay payment of or fail to pay our invoices. In weak economic environments, we may experience increased delays and failures due to, among other reasons, a reduction in our customers’ cash flow from operations, their access to the credit markets and rising interest rates. If our customers delay paying or fail to pay us a significant amount of our outstanding receivables, it could have a material adverse effect on our liquidity, consolidated results of operations, and consolidated financial condition.
23
New or existing tariffs and other trade measures could adversely affect our results of operations, financial position and cash flows.
New or existing tariffs and other trade measures could adversely affect our results of operations, financial position and cash flows, either directly or indirectly through various adverse impacts on our significant customers. In 2025, the U.S. announced and implemented substantial new tariffs on imports from a wide range of countries, including China, where we typically source metal. These actions prompted retaliatory tariffs by several countries and set off a cycle of retaliatory tariffs by both the U.S. and other countries. Also in 2025, the U.S. increased tariffs on steel and aluminum to 50 percent. These higher tariffs, along with broader measures targeting countries such as China, have significantly impacted the cost of importing steel and aluminum. We utilize steel in our steel plate and steel pipe as key materials in our NobelClad and DynaEnergetics businesses, and aluminum as a key material in our Arcadia Products business. While we have been able to source some metals domestically, certain materials are only available from sources subject to tariffs. The cost of domestic steel and aluminum also increased, along with the price of delivery. These higher costs have increased the price of certain of our products to our customers and, in some instances, affected our ability to be competitive. For our NobelClad business, this has impacted our ability to compete on international projects and negatively impacted U.S. fabricators, which are the primary consumers of NobelClad products. For our DynaEnergetics and Arcadia Products businesses, this has resulted in margin compression in core energy and construction markets. These new tariffs have had, and continue to have, an impact on our financial condition and results of operations.
In addition, new or existing tariffs and other trade measures and retaliations may further directly impair our business by increasing costs or disrupting established supply chains. New tariffs or increases in existing tariffs on goods imported from countries where we or our suppliers operate could result in increased costs for raw materials, components, or finished goods. These increases may reduce our margins, require us to raise prices, or make our products less competitive in the marketplace. Retaliatory tariffs imposed by other countries on U.S. exports could adversely impact demand for our products in international markets. If we are unable to mitigate these risks through supply chain adjustments, pricing strategies, or other measures, our financial performance and growth prospects could be negatively affected. The tariff policy environment remains dynamic and unpredictable. Prolonged tariffs, retaliatory tariffs, additional trade restrictions, or broader global trade conflicts could have a material adverse effect on our business, financial condition and results of operations.
Failure to attract and retain key personnel and source sufficient labor could adversely affect our current operating results.
Our continued success depends to a large extent upon the efforts and abilities of key managerial and technical employees, and our ability to secure sufficient manufacturing labor. Recently, there have been significant changes in our management team, including the appointment of James O’Leary as DMC’s President and Chief Executive Officer, effective July 1, 2025. Mr. O’Leary had served as DMC’s Interim President and Chief Executive Officer since the retirement of Michael Kuta, President and Chief Executive Officer of DMC, on November 29, 2024. Additionally, effective February 3, 2025, James Schladen rejoined Arcadia Products as President, following the departure of Christopher Scocos, Interim President, and the 2024 departure of James Chilcoff, President. Our current and future success depends on the skills, experience, and retention of our executive officers, senior management, key employees and directors. These individuals possess specialized knowledge critical to our business and strategy. The loss or unavailability of any key personnel could have an adverse effect on the Company’s leadership, and the ability to execute our strategy, financial condition and results of operations, particularly if we are unable to implement effective succession plans.
In order to meet the needs and expectations of our customers and to achieve our growth objectives, we must attract, train, and retain a large number of hourly associates, while at the same time controlling labor costs. These positions have historically had high turnover rates, which can lead to increased training, retention and other costs. In certain areas where we operate, there is significant competition for employees, and we must ensure that we continue to offer competitive wages, benefits and workplace conditions to retain qualified employees, which increases our labor costs. A shortage of qualified candidates who meet all legal work authorization requirements, failure to hire and retain new employees in a timely manner or higher than expected turnover levels could affect our ability to meet customer demand, grow our businesses and meet our labor cost objectives and could have impacts on employee satisfaction generally. In addition, restrictive immigration policies or legal or regulatory developments relating to immigration may negatively affect our efforts to attract and hire new personnel as well as retain existing personnel. See “Changes in immigration laws or enforcement programs could adversely affect our business” below for additional information. Furthermore, failure to adequately monitor and proactively respond to employee dissatisfaction could lead to higher turnover, litigation and unionization efforts, which could negatively impact our ability to meet our operating results.
24
Changes in immigration laws or enforcement programs could adversely affect our business.
Certain states in which we operate are considering or have already adopted new immigration laws and/or enforcement programs, and the federal government from time to time considers and implements changes to federal immigration laws, regulations, and/or enforcement programs. Recently, Immigration and Customs Enforcement (“ICE”) has significantly increased its enforcement of immigration laws. We use the U.S. government’s “E-Verify” program to verify employment eligibility for all new employees in the U.S. However, use of E-Verify does not guarantee that we will successfully identify all applicants who are ineligible for employment. Unauthorized workers are subject to deportation and may subject us to fines or penalties, and if any of our workers are found to be unauthorized, we could experience adverse publicity that negatively impacts our brands and may make it more difficult to hire and retain qualified employees. We could also become subject to fines, penalties, and other costs related to claims that we did not fully comply with all record keeping obligations of federal and state immigration compliance laws. Additionally, increased enforcement of immigration laws may disrupt operations and reduce the overall labor pool and as a byproduct, increase labor costs and the demand for qualified employees. These factors could have a material adverse effect on our business, financial condition, and results of operations.
In addition, our customers may also be subject to ICE enforcement actions, and any resulting operational disruptions could adversely affect their businesses. Such disruptions may reduce demand for our products, delay customer projects or purchasing decisions, or otherwise negatively impact our business, financial condition, and results of operations.
A failure in our information technology systems or those of third parties, including those caused by security breaches, cyber-attacks or data protection failures, could disrupt our business, result in significant legal costs and other losses and damage our reputation.
We are dependent upon information technology systems in the conduct of our operations. Our information technology systems are subject to disruption, damage or failure from a variety of sources, including, without limitation, computer viruses, security breaches, cyber-attacks, natural disasters and defects in design. Cybersecurity incidents in particular are evolving and include, but are not limited to, malicious software, attempts to gain unauthorized access to data and banking information and other electronic security breaches that could lead to disruptions in systems, unauthorized release of confidential or otherwise protected information and the corruption of data. The risk of cybersecurity incidents may increase with political and economic instability or warfare (including the ongoing hostilities between Russia and Ukraine and ongoing conflicts in the Middle East) and the use of artificial intelligence (“AI”) to make intrusion attempts look more legitimate. Various measures have been implemented to manage our risks related to information technology systems and network disruptions. However, given the unpredictability of the timing, nature and scope of information technology disruptions, we could potentially be subject to production downtimes, operational delays, the compromising of confidential or otherwise protected information, destruction or corruption of data, security breaches, theft, other manipulation or improper use of our systems and networks or financial losses from remedial actions, any of which could have a material adverse effect on our cash flows, competitive position, financial condition or results of operations. In addition, a data breach could result in negative publicity which could damage our reputation and have an adverse effect on our results of operations and our stock price.
We outsource certain technology and business process functions to third parties and may increasingly do so in the future. If we do not effectively develop, implement and monitor our outsourcing strategy, if third-party providers do not perform as anticipated or if we experience technological or other problems with a transition, we may not realize productivity improvements or cost efficiencies and may experience operational difficulties, increased costs and loss of business. Our outsourcing of certain technology and business processes to third parties may expose us to enhanced risks related to data security, which could result in monetary and reputational damages. In addition, our ability to receive services from third-party providers may be impacted by cultural differences, political instability, and unanticipated regulatory requirements or policies. As a result, our ability to conduct our business may be adversely affected.
In addition, the number of data security incidents has increased regulatory and industry focus on security requirements and heightened data security industry practices. New regulations, evolving industry standards, and the interpretation of both, may cause us to incur additional expenses in complying with any new data security requirements. As a result, the failure to maintain the integrity of and protect customer, supplier or our own confidential internal data could have a material adverse effect on our business, operating results and financial condition.
Artificial intelligence presents risks and challenges that could adversely affect our business.
AI presents risks and challenges that could impact our business, including perceived breaches of privacy or security incidents related to the use of AI. We are integrating AI tools into our operations, and our third-party service providers and
25
competitors are adopting such technologies. While AI may become increasingly important to our operations or future growth over time, there can be no assurance that we will realize the anticipated benefits, or any benefits at all, from these initiatives.
Improper implementation, reliance on flawed models, or failure to adapt to evolving standards could adversely affect our operations. In addition, the providers of AI tools used by us or our third-party service providers may not meet existing or rapidly evolving regulatory or industry standards with respect to privacy and data protection, compliance, and transparency, among others, which could inhibit our ability or that of our third-party service providers to maintain an adequate level of functionality or service. Our third-party service providers may also incorporate AI into their services without disclosing such use to us, or fail to disclose risks presented by their use of AI. There is a risk that AI tools used by us or by our third-party service providers could produce inaccurate or unexpected results or behaviors that could harm our business, customers, or reputation.
Advances in automation and AI may also alter the skills required of our workforce and could reduce demand for certain roles, creating challenges in workforce management, employee relations, and reputational risk. We may be required to make significant investments in retraining and workforce transition programs, and failure to effectively manage these changes could impair our ability to attract and retain talent, disrupt operations, and adversely affect our business.
Our competitors or other third parties may incorporate AI in their business operations more quickly or more successfully than we do, placing us at a competitive disadvantage. Additionally, the complex and rapidly evolving legal and regulatory landscape around AI may expose us to claims, inquiries, demands and proceedings by private parties and global regulatory authorities and subject us to legal liability as well as reputational harm. New laws and regulations are being adopted in the United States and in non-U.S. jurisdictions, and existing laws and regulations may be interpreted in ways that would affect our business operations and the way in which we use AI. Any of these outcomes could impair our ability to compete effectively, damage our reputation, result in the loss of property or information belonging to us or our customers, and materially adversely affect our financial position, operating results or cash flows.
Failure to establish and maintain adequate internal controls over financial reporting could result in the inability to report our financial results in a timely and reliable manner, which could harm our business and impact the value of our securities.
We depend on our ability to produce accurate and timely financial statements in order to run our business. If we fail to do so, our business could be negatively affected and our independent registered public accounting firm may be unable to attest to the fair presentation of our Consolidated Financial Statements in accordance with U.S. generally accepted accounting principles (“GAAP”) and the effectiveness of our internal control over financial reporting, as required by Section 404 of the Sarbanes-Oxley Act. Effective internal controls are necessary for us to provide reliable financial reports and to effectively prevent fraud. If we cannot provide reliable financial reports and effectively prevent fraud, our reputation and operating results could be harmed. Even effective internal controls have inherent limitations including the possibility of human error, the circumvention or overriding of controls, or fraud. Therefore, even effective internal controls can provide only reasonable assurance with respect to the preparation and fair presentation of financial statements. In addition, projections of any evaluation of effectiveness of internal control over financial reporting in future periods are subject to the risk that the control may become inadequate because of changes in conditions or a deterioration in the degree of compliance with the policies or procedures.
If we fail to maintain adequate internal controls, including any failure to implement new or improved controls as may be required by acquisitions or other changes in our business, or if we experience difficulties in their execution, we could fail to meet our reporting obligations, and there could be a material adverse effect on our business and financial results. In the event that our current internal control practices deteriorate, we may be unable to accurately report our financial results or prevent fraud, and investor confidence and the market price of our stock may be adversely affected.
Legal and Regulatory Risks
Our operations require us to comply with numerous laws and regulations, violations of which could have a material adverse effect on our consolidated results of operations, financial condition or cash flows.
Our operations are subject to international, regional, national, and local laws and regulations in every place where we operate, relating to matters such as environmental protection, health and safety, labor and employment, import/export controls, currency exchange, bribery and corruption, data privacy and cybersecurity, intellectual property, immigration, and taxation. These laws and regulations are complex, frequently change, and have tended to become more stringent over time. In the event the scope of these laws and regulations expands in the future, the incremental cost of compliance could adversely affect our consolidated financial condition, consolidated results of operations, or consolidated cash flows.
26
Our international operations are subject to anti-corruption and anti-bribery laws and regulations, such as the FCPA, the U.K. Bribery Act and other similar laws, which prohibit engaging in certain activities to obtain or retain business or to influence a person working in an official capacity. We do business and may in the future do additional business in countries and regions in which we may face, directly or indirectly, corrupt demands by officials, tribal or insurgent organizations, or by private entities in which corrupt offers are expected or demanded. Furthermore, many of our operations require us to use third parties to conduct business or to interact with people who are deemed to be governmental officials under the anti-corruption laws. Thus, we face the risk of unauthorized payments or offers of payments or other things of value by our employees, contractors or agents. It is our policy to implement compliance procedures to prohibit these practices. However, despite those safeguards and any future improvements to them, our employees, contractors, and agents may engage in conduct for which we might be held responsible, regardless of whether such conduct occurs within or outside the U.S.
We are also subject to trade control regulations and trade sanctions laws that restrict the movement of certain goods to, and certain operations in, various countries or with certain persons. These trade regulations and laws can include restrictions on selling or importing goods, services or technology in or from affected regions, travel bans and asset freezes impacting connected individuals and political, military, business and financial organizations and can change very quickly. Our ability to transfer people, products and data among certain countries is subject to maintaining required licenses and complying with these laws and regulations. Furthermore, the laws and regulations concerning import activity, export recordkeeping and reporting, export control and economic sanctions are complex and constantly changing. It is our policy to implement procedures concerning compliance with applicable trade sanctions, export controls, and other trade-related laws and regulations. However, despite those safeguards and any future improvements to them, our employees, contractors, and agents may engage in conduct for which we might be held responsible, regardless of whether such conduct occurs within or outside the U.S.
The internal controls, policies and procedures, and employee training and compliance programs we have implemented to deter prohibited practices may not be effective in preventing employees, contractors or agents from violating or circumventing such internal policies or from material violations of applicable laws and regulations. Any determination that we have violated or are responsible for violations of anti-bribery, trade control, trade sanctions or anti-corruption laws could have a material adverse effect on our financial condition. Violations of international and U.S. laws and regulations or the loss of any required licenses, even if in violation of our internal controls, policies, and procedures, may result in fines and penalties, criminal sanctions, administrative remedies or restrictions on business conduct, and could have a material adverse effect on our business, operations and financial condition. In addition, any actual or alleged violations could have a significant effect on our reputation, be expensive to defend and impair our ability to win future business and maintain existing customer and supplier relationships.
The use of explosives in our DynaEnergetics and NobelClad manufacturing processes and products subject us to additional environmental, health and safety laws and any accidents or injuries could subject us to significant liabilities.
DynaEnergetics uses explosive materials in its manufacturing processes and products. NobelClad’s manufacturing process involves the detonation of large quantities of explosives. The use of explosives is an inherently dangerous activity. These activities subject us to extensive environmental and health and safety laws and regulations including guidelines and regulations for the purchase, manufacture, handling, transport, storage and use of explosives issued by the U.S. Bureau of Alcohol, Tobacco and Firearms; the Federal Motor Carrier Safety regulations set forth by the U.S. Department of Transportation; the Safety Library Publications of the Institute of Makers of Explosive; and similar guidelines of their European counterparts. In Germany, the transport, storage and use of explosives is governed by a permit issued under the Explosives Act (Sprengstoffgesetz).
Despite our use of specialized facilities to store and handle dangerous materials and our employee training programs, the storage and handling of explosive materials could result in explosive incidents that temporarily shut down or otherwise disrupt our or our customers’ operations or cause restrictions, delays or cancellations in the delivery of our services. It is possible that such an explosion could result in death or significant injuries to employees and other persons. Material property damage to us, our customers and third parties arising from an explosion or resulting fire could also occur. Any explosion could expose us to adverse publicity and liability for damages or cause production restrictions, delays or cancellations, any of which could have a material adverse effect on our operating results, financial condition and cash flows. Moreover, failure to comply with applicable requirements or the occurrence of an explosive incident may also result in the loss of our license to store and handle explosives, which would have a material adverse effect on our business, results of operations and financial conditions.
Demand for our products could be reduced by existing and future legislation, regulations and public sentiment.
Regulatory agencies and environmental advocacy groups in the United States, the E.U., and other regions or countries have been focusing considerable attention on the emissions of carbon dioxide, methane and other greenhouse gases and their role in climate change. There is also increased focus, including by governments and our customers, investors and other
27
stakeholders, on these and other sustainability and energy transition matters. Existing or future legislation and regulations related to greenhouse gas emissions and climate change, as well as initiatives by governments, non-governmental organizations, and companies to conserve energy or promote the use of alternative energy sources, and negative attitudes toward or perceptions of fossil fuel products and their relationship to the environment, may significantly curtail demand for and production of oil and gas in areas of the world where our customers operate, and thus reduce future demand for some of our products.
In addition, some international, national, state and local governments and agencies have also adopted laws and regulations or are evaluating proposed legislation and regulations that are focused on directly limiting the extraction of shale gas or oil using hydraulic fracturing. These laws and regulations could limit oil and gas development, lead to operational delays and increased costs for our customers, and therefore reduce demand for our products. Such reductions in demand for our products may, in turn, adversely affect our financial condition, results of operations and cash flows.
Increased negative investor sentiment toward oil and gas and preference for assets outside of traditional energy sectors could lead to higher capital costs for our customers and reduced investment in fossil fuels, thereby reducing demand for our products. Such preferences could also impact our ability to obtain acceptable debt or equity financing on attractive terms or at all and could negatively impact our stock price over time. Our business, reputation and demand for our stock could be negatively affected if we do not (or are perceived to not) act responsibly with respect to sustainability matters.
We are subject to extensive environmental, health and safety laws and failure to comply with such laws and regulations could result in restrictions or prohibitions on our facilities, substantial civil or criminal liabilities and could have a material adverse effect on our business, consolidated results of operations, and consolidated financial condition.
We are subject to extensive environmental, health and safety regulation in the United States and the other countries where our manufacturing facilities are located. Among other things, these laws regulate the emissions or discharge of materials into the environment; govern the use, storage, treatment, disposal and management of hazardous substances and wastes; protect the health and safety of our employees; regulate the materials used in our products or manufacturing processes; and impose liability for the costs of investigating and remediating (as well as other damages resulting from) present and past releases of hazardous substances. Representative laws and regulations which we may be subject to the in the U.S. include: noise abatement and air emissions regulations, the Comprehensive Environmental Response, Compensation and Liability Act of 1980, the Resource Conservation and Recovery Act (“RCRA”) and comparable state laws, and various regulations and laws enforced by the U.S Department of Labor, the U.S. Department of Commerce, and the U.S. Environmental Protection Agency and their state equivalents. Violations of these laws or of any conditions contained in environmental permits can result in substantial fines or penalties, injunctive relief, requirements to install pollution controls or other equipment, and civil sanctions. We could be held liable for costs to investigate, remediate or otherwise address contamination at any real property we have ever owned, operated or used as a disposal site, or at other sites where we or predecessors may have released hazardous materials. We could incur fines, penalties or sanctions or be subject to third-party claims, including indemnification claims, for property damage, personal injury or otherwise as a result of violations of (or liabilities under) environmental, health and safety laws, or in connection with releases of hazardous or other materials.
Changes in or new interpretations of existing laws, regulations or enforcement policies, the discovery of previously unknown contamination, or the imposition of other environmental liabilities or obligations in the future including additional investigation, remediation or other obligations with respect to our products or business activities may lead to additional compliance costs or require us to change our manufacturing processes, which could have a material adverse effect on our business, financial condition or results of operations.
In Germany, we and all our activities are subject to various safety and environmental regulations of the federal state which are enforced by the local authorities, including the Federal Act on Emission Control (Bundes-Immissionsschutzgesetz). The Federal Act on Emission Control permits are held by companies jointly owned by DynaEnergetics and the other companies that are located at the Troisdorf manufacturing site and are for an indefinite period of time. The Dillenburg, Germany facility is operated based on a specific permit granted by the local mountain authority and must be renewed every three years. Any failure to comply with current and future environmental and safety regulations could subject us to significant liabilities. Any actual or alleged violations of environmental, health or safety laws could result in restrictions or prohibitions on our facilities or substantial civil or criminal sanctions. In addition, under certain environmental laws, we could be held responsible for all of the costs relating to any contamination at our facilities and at third-party waste disposal sites, even when such contamination was caused by a predecessor and even when the actions resulting in the contamination were lawful at the time. We could also be held liable for any and all consequences arising out of human exposure to hazardous substances or other environmental damage.
28
Failure to comply with applicable federal, state and local employment and labor laws and regulations could have a material, adverse impact on our business.
Various federal, state and local employment and labor laws and regulations govern our relationships with our employees, and similar laws and regulations apply to our operations outside of the U.S. These laws and regulations relate to matters such as employment discrimination, wage and hour laws, requirements to provide and document meal and rest periods or other benefits, family leave mandates, employee classification, requirements regarding working conditions and accommodations to certain employees, citizenship or work authorization and related requirements, insurance and workers’ compensation rules, healthcare laws and anti-discrimination and anti-harassment laws. We incur substantial costs to comply with these laws and regulations and non-compliance or alleged non-compliance could expose us to significant liabilities. In particular, we are subject to numerous strict labor and employment laws in California, where failure to comply can result in significant penalties, class actions, and Private Attorneys General Act claims. We have faced, and may continue to face, lawsuits alleging wage-and-hour violations and other employment-related claims. We may in the future be required to defend similar actions, and we could incur losses from these and similar cases, and the amount of such losses or costs could be material.
Several jurisdictions also have implemented sick pay and paid time off legislation, which requires employers to provide paid time off to employees, and “just cause” termination legislation, which restricts companies’ ability to terminate employees or reduce employees’ hours unless they can prove “just cause” or a “bona fide economic reason” for the termination or reduction in hours. All of these regulations impose additional obligations on us and our failure to comply with any of these regulations could subject us to penalties and other legal liabilities, which could adversely affect our business and results of operations.
The regulatory environment governing information, data security and privacy is increasingly demanding and evolving and a data security breach could result in litigation, enforcement actions and related penalties and fines.
The regulatory environment surrounding information security and privacy is increasingly complex and demanding. We are subject to numerous U.S. federal and state laws and non-U.S. laws and regulations governing the protection of personal and confidential information of our customers and employees. The regulatory framework for privacy and security issues worldwide is rapidly evolving and is likely to remain uncertain for the foreseeable future.
Several U.S. states have passed comprehensive privacy laws that have recently become effective. Of note among them is the California Consumer Privacy Rights Act (“CPRA”), which amends and expands the California Consumer Privacy (“CCPA”). The CPRA, which went into effect on January 1, 2023, along with the CCPA, governs the transmission, security and privacy of California residents’ personal information. The CPRA has a twelve-month look-back period for enforcement purposes. Among many new requirements, the CPRA creates a category for sensitive data including health and other personal information that requires additional safeguards and disclosures. In addition, the CPRA expands consumers’ rights and has enhanced enforcement mechanisms such as the creation of a California Privacy Protection Agency that will investigate and enforce the CPRA and its promulgating regulations. Several states have also enacted omnibus data privacy laws. In addition, many other proposals exist in states across the U.S. that could increase our potential liability and increase our compliance costs. Aspects of these state privacy statutes remain unclear, resulting in further legal uncertainty and potentially requiring us to modify our data practices and policies and to incur substantial additional compliance costs.
Internationally, the European Data Protection Board has released guidelines on enforcement and fines related to the General Data Protection Regulation (“GDPR”). The guidelines suggest a tougher stance on enforcement and stiffer fines for companies that violate the GDPR. This is in addition to the continued complexities involving the transfer of personal data from Europe to the U.S. In July 2023, the European Commission announced a new Trans-Atlantic Data Privacy Framework, which requires additional compliance efforts from our company.
As U.S. and international data privacy and protection laws continue to evolve, and as new regulations, interpretive guidance and enforcement information become available, we may incur incremental costs to modify our business practices to comply with these requirements. In addition, our internal control policies and procedures may not always protect us from reckless, intentional or criminal acts committed by our employees or agents.
Violations of these laws, or allegations of such violations, could subject us to criminal or civil, monetary or non-monetary penalties, disrupt our operations, involve significant management distraction, subject us to class action lawsuits and result in a material adverse effect on our business, financial condition and results of operations.
29
Legal, regulatory or market measures to address climate change, including proposals to restrict emissions of greenhouse gas and other sustainability initiatives, could have an adverse impact on the Company’s business and results of operations.
Various legislative, regulatory, and inter-governmental proposals to restrict emissions of greenhouse gas, such as carbon dioxide, are under consideration, or have already passed into law, by governmental legislative bodies and regulators in the jurisdictions where we operate. Such regulatory and global initiatives may require us to modify our operating procedures, incur capital expenditures, change fuel sources, or take other actions that may adversely affect our financial results. Increasing regulations to reduce greenhouse gas emissions, as proposed throughout many of our operating regions, would be expected to increase energy costs, reduce energy availability and increase price volatility for energy.
The heightened stakeholder focus on sustainability issues related to our businesses requires frequent monitoring of various and evolving laws, regulations, standards and expectations and the associated reporting requirements. Specifically, certain stakeholders are beginning to require that we provide information on our plans relating to certain climate-related matters such as greenhouse gas emissions. A failure to adequately or timely meet varied and sometimes contradictory stakeholder expectations and reporting requirements may result in noncompliance with any imposed regulations, the loss of business, reputational impacts, diluted market valuation, an inability to attract and retain customers, and an inability to attract and retain top talent. In addition, our adoption and the reporting of certain standards or mandated compliance with certain requirements could necessitate additional investments that could impact our profitability.
Further, we have established and publicly disclosed other sustainability targets and goals and other commitments that are subject to a variety of assumptions, risks and uncertainties. If we are unable to meet these targets, goals or commitments on our projected timelines or at all, or if they are not perceived to be sufficiently robust, our reputation as well as our relationships with investors, customers and other stakeholders could be harmed, which could in turn adversely impact our business and results of operations.
Changes in or interpretation of tax law could impact the determination of our income tax liabilities for a tax year.
We are subject to income taxes in the U.S. and certain foreign jurisdictions. Significant judgment is required in determining our worldwide provision for income taxes. In the course of our business, there are many transactions and calculations where the ultimate tax determination is subjective or uncertain. We earn a significant amount of our operating income outside the U.S and have significant intercompany transactions between our affiliates. A change in the mix of earnings and losses in countries with differing statutory tax rates, changes in our business or structure, or disputes about intercompany transfer pricing arrangements may result in higher effective tax rates for the Company.
Our future effective tax rates could be adversely affected by changes in tax laws or their interpretation, both domestically and internationally. For example, on July 4, 2025, the U.S. enacted the One Big Beautiful Bill Act (“OBBBA”), which contains a broad range of changes to federal tax law. As regulations and guidance evolve with respect to tax law, our results may differ from previous estimates and may materially affect our financial condition or results of operations. The OECD/G20 Base Erosion and Profit Shifting Project (or “BEPS Project”) is developing an international framework to combat tax avoidance by multinational enterprises and countries where the Company is subject to taxes are independently evaluating their corporate tax policy. Tax legislation and enforcement could adversely impact the Company’s tax provision and the value of deferred tax assets and liabilities.
We are under audit by tax authorities in different jurisdictions from time to time. Although we believe that our provision for income taxes and our tax estimates are reasonable, tax authorities may disagree with certain positions we have taken. In addition, economic and political pressures to increase tax revenue in various jurisdictions may make resolving tax disputes favorably more difficult. The final resolution of any audits or litigation may differ from the amounts recorded in our Consolidated Financial Statements and may materially affect our Consolidated Financial Statements in the period or periods in which that determination is made.
Intellectual Property Risks
Our failure to protect our proprietary information and any successful intellectual property challenges against us could materially and adversely affect our competitive position.
The protection of our intellectual property rights is essential to maintaining our competitive position and recognizing the value of our investments in technology and intellectual property in our existing and future products. We rely on trade secret protection for certain aspects of our technology, in part through confidentiality and other written agreements with our
30
employees, consultants and third parties. Through these and other written agreements, we attempt to control access to and distribution of our intellectual property documentation and other proprietary technology information. Despite our efforts to protect our proprietary rights, former employees, consultants or third parties may, in an unauthorized manner, attempt to use, copy or otherwise obtain and market or distribute our intellectual property rights or technology or otherwise develop a product with the same functionality as our technology. Policing unauthorized use of our intellectual property rights is difficult, and nearly impossible on a worldwide basis. Therefore, we cannot be certain that the steps we have taken or will take in the future will prevent misappropriation of our technology or intellectual property rights.
We also actively pursue patent protection for our proprietary technology and intellectual property where appropriate for protecting our competitive position. The process of seeking patent protection can be long and expensive and we cannot be certain that any currently pending or future applications will actually result in issued patents, or that, even if patents are issued, they will be respected by third parties. The use of our intellectual property and other proprietary information by others could reduce or eliminate any competitive advantage we have developed, potentially causing us to lose sales or otherwise harm our business. In addition, our competitors may be able to develop technology independently that is similar to ours without infringing on our patents or gaining access to our trade secrets, and this could have a similar effect on our competitive position.
Intellectual property litigation and threats of litigation are becoming more common in the oilfield services industry. We have been in the past and may in the future be involved in litigation, in the United States or abroad, to enforce our patents or other intellectual property rights or to protect our trade secrets and know-how. These actions can require multiple years to come to resolution or settlement, and even if we ultimately prevail, we may be unable to realize adequate protection of our competitive position. In addition, these actions commonly result in actions by the affected third parties to establish the invalidity of our patents. While we intend to prosecute these actions vigorously, there is no guarantee of success, and such effort takes significant financial and management resources from the Company. In the event that one or more of our patents are challenged, a court or the United States Patent and Trademark Office (“USPTO”) may invalidate the patent(s) or determine that the patent(s) is not enforceable, which could harm our competitive position. If our patents are invalidated, or if the scope of the claims in any of these patents is limited by a court or USPTO decision, we could be prevented from pursuing certain litigation matters or licensing the invalidated or limited portion of such patents. Such adverse decisions could negatively impact our future revenue. Patent litigation, if necessary or when instituted against us, could result in substantial costs and divert our management’s attention and resources.
We may incur substantial costs defending against third parties alleging that we infringe their proprietary rights.
We have been in the past and may in the future be involved in litigation relating to alleged infringement by us of others’ patents or other intellectual property rights. We have an active “freedom to operate” review process for our technology, but there is no assurance that future infringement claims will not be asserted. Infringement claims generally result in significant legal and other costs and may distract management from running our core businesses even if we are ultimately successful. In the event of any adverse ruling in any intellectual property litigation, we could be required to pay substantial damages, cease the manufacturing, use and sale of infringing products, discontinue the use of certain processes or obtain a license from the third-party claiming infringement with royalty payment obligations by us. We also have certain indemnification obligations to customers with respect to the infringement of third-party intellectual property rights by our products, which may increase our costs. Any of these occurrences could significantly harm our competitive position, results of operations, financial position and cash flows.
Risks Related to Acquisitions
We have incurred debt to finance the acquisition of 60% of Arcadia Products and may incur additional substantial financial obligations in connection with the acquisition of the remaining 40% of Arcadia Products.
We financed a portion of the purchase price of the Arcadia Products acquisition with proceeds from our credit facility, which we amended in 2024 and 2025, to enhance our financial flexibility with respect to the possible exercise of the Put Option or the Call Option related to the acquisition of the remaining 40% ownership of Arcadia Products. The 2024 credit facility amendment increased the total facility amount, and the 2025 amendment temporarily increased the maximum leverage ratio should either the Put Option or Call Option be exercised. Our ability to service the indebtedness under the credit facility and to maintain compliance with its covenants, which are based in part on trailing twelve-month results, are subject to numerous risks and uncertainties as discussed herein.
As early as September 6, 2026, we may be required to pay the Option Purchase Price for some or all of Munera’s interests in Arcadia Products if Munera exercises the Put Option. Even if we elect to pay 80% of the Option Purchase Price in preferred stock, we will need to fund the remaining portion in cash. The preferred stock issued in connection with the Option
31
Purchase Price would be entitled to dividends, and the Company would be required to begin proportionate annual redemptions of the preferred stock beginning on June 23, 2027, and, in any event, redeem the preferred stock by the third anniversary of its issuance.
Although the credit facility amendments were intended to allow us to finance the Option Purchase Price, a potential exercise will depend on numerous factors, including the performance of our businesses, the status of any changes to our businesses and general market and economic conditions. If we access the credit facility to pay all or a portion of the Option Purchase Price, we will have to devote a substantial portion of our cash flow to meet required payments of principal and interest on this indebtedness, and if we are unable to generate sufficient cash flow to do so, or if we otherwise fail to comply with the terms of the credit facility, we could be in default under the credit facility. If we fail to pay the Option Purchase Price when required under the Operating Agreement, we will be in default under that agreement. If we are unable to pay the Option Purchase Price entirely in cash or otherwise choose to pay a portion of the Option Purchase Price in preferred stock, we will have to devote a substantial portion of our cash flow to meet the requirements for dividends and redemption of the preferred stock. The Option Purchase Price is subject to a defined “floor” value in the Operating Agreement, which is based primarily upon a contractually-stated equity value and will likely be substantial relative to the current size of our business. The floor value applies even if Arcadia Products' performance fails to meet our expectations, and we may find it difficult to obtain additional financing, if needed, for the payment of the Option Purchase Price. In addition, debt or preferred equity financing, if obtained, may involve agreements that include liens or restrictions on our assets and covenants limiting or restricting our ability to take specific actions, such as paying dividends or making distributions, incurring additional debt, acquiring or disposing of assets or increasing expenses. Debt financing would also be required to be repaid regardless of our operating results. Obtaining financing through issuances of equity securities would impose fewer restrictions on our future operations but would be dilutive to the interests of existing stockholders.
DMC is the majority shareholder of Arcadia Products, and our interest in Arcadia Products is subject to the risks normally associated with the conduct of businesses with a minority shareholder.
Munera continues to hold 40% of the outstanding equity interests of Arcadia Products. The Operating Agreement governs our relationship with Munera, and we believe the Operating Agreement provides us with effective and sufficient control of Arcadia Products to allow the business to be operated consistent with our goals and values and with sufficient opportunity for profitable growth. Nevertheless, conducting a business with minority owners may lead to certain risks and uncertainties, which could have an adverse impact on our ability to profitably grow the Arcadia Products business, which could have a material adverse effect on our future cash flows, earnings, results of operations and financial condition. These include:
•our ability to effectively control certain strategic, operational and financial decisions;
•the potential for disagreement over the direction of the company and costs and expenses involved; and
•the risk of having economic or business interests or goals that are inconsistent with, or opposed to, those of Munera.
There can be no assurance that the acquisition will be beneficial to us, whether due to the above-described risks, unfavorable economic conditions, integration challenges or other factors.
To the extent that we seek to further expand our business through acquisitions, we may experience issues in executing acquisitions or integrating acquired operations.
From time to time, we examine opportunities to make selective acquisitions in order to increase shareholder return by increasing our total available markets, expanding our existing operations and, potentially, generating synergies. The success of any acquisition depends on a number of factors, including, but not limited to:
•identifying suitable candidates for acquisition and negotiating acceptable terms;
•obtaining approval from regulatory authorities and potentially DMC’s shareholders;
•maintaining our financial and strategic focus and avoiding distraction of management during the process of integrating the acquired business;
•securing adequate financing on acceptable terms;
•implementing our standards, controls, procedures and policies at the acquired business and addressing any pre-existing liabilities or claims involving the acquired business;
•retaining key employees, customers and business partners of the acquired business;
•our ability to realize the expected tax treatment or tax benefits from the transaction; and
32
•to the extent the acquired operations are in a country in which we have not operated historically, understanding the regulations and challenges of operating in that new jurisdiction.
For example, our due diligence process may not reveal all liabilities associated with a potential acquisition, and this could result in us incurring unanticipated losses after the acquisition is completed. There can be no assurance that we will be able to conclude any acquisitions successfully or that any acquisition will achieve the anticipated synergies or other positive results. Any material problems that we encounter in connection with such an acquisition could have a material adverse effect on our business, results of operations and financial position.
Risk Factors Related to Our Common Stock
The price and trading volume of our common stock has been and may continue to be volatile, which may make it difficult for investors to resell the common stock at attractive timing or pricing.
The market price and trading volume of our common stock may be subject to significant fluctuations due to general stock market conditions and/or a change in sentiment in the market regarding our operations, business prospects or liquidity. Among the factors that could affect the price of our common stock are:
•changes in the architectural building products, oil and gas, industrial, or infrastructure markets;
•operating and financial performance that vary from the expectations of management, securities analysts or investors;
•developments in our business or in our business sectors generally;
•significant litigation;
•additions or departures of key personnel;
•regulatory changes affecting our industries generally or our business and operations;
•the operating and stock price performance of companies that investors consider to be comparable to us;
•announcements of strategic developments, acquisitions and other material events by us or our competitors;
•our ability to integrate and operate the companies and the businesses that we acquire;
•rumors and market speculation regarding our industries, business or trading activity;
•significant amounts of short selling, the perception that short sales could occur and other speculative trading activity;
•activism by any large stockholder or group of stockholders;
•new positions adopted by investor stewardship groups and proxy advisory firms regarding desired sustainability disclosures, policies, ranking systems and other initiatives; and
•changes in global financial markets and global economies and general market conditions, including volatility in foreign exchange rates, tariffs and stock, commodity, credit or asset valuations, and government actions or shutdowns.
Recently, the trading price of our common stock has experienced volatility. During 2025, the closing price for our common stock ranged from a low of $5.53 per share in November 2025 to a high of $9.06 per share in February 2025. The stock markets in general have experienced extreme volatility that has at times been unrelated to the operating performance of particular companies, and these fluctuations may adversely affect the trading price of our common stock.
Our business could be negatively affected as a result of actions of activist stockholders or others.
We have been, and may be in the future, subject to informal private or public inquiries and formal proxy actions or proposals from stockholders or others that may not align with our business strategies or the interests of our other stockholders. Responding to such actions can be costly and time-consuming, disrupt our business and operations, and divert the attention of our Board, management, and employees from the pursuit of our business strategies. Such activities could interfere with our ability to execute our strategic plan. Activist stockholders or others may create perceived uncertainties as to the future direction of our business or strategy which may be exploited by our competitors and may make it more difficult to attract and retain qualified personnel and potential customers, and may affect our relationships with current customers, vendors, investors, and other third parties. In addition, a proxy contest for the election of directors at our annual meeting would require us to incur significant legal fees and proxy solicitation expenses and require significant time and attention by management and our Board. Our stock price could also be subject to significant fluctuations or otherwise be adversely affected by the events, risks and
33
uncertainties of any stockholder activism. The actions of stockholder activists could materially and adversely impact our business, operating results, and financial condition.
Our stockholder protection rights agreement includes terms and conditions that could discourage a takeover or other transaction that stockholders may consider favorable.
On June 5, 2024, the Company entered into a Stockholder Protection Rights Agreement (as amended, the “Rights Agreement”), pursuant to which the Board declared a dividend of one right (“Right”) for each share of our common stock outstanding at the close of business on June 17, 2024. One Right will also be issued together with each share of common stock issued by the Company after that date, but before the Separation Time (as defined in the Rights Agreement). Each Right initially represents the right to purchase one one-thousandth of a share of Series B Participating Preferred Stock for $75.00, subject to adjustment and upon such terms and subject to the conditions set forth in the Rights Agreement. Rights will generally become exercisable only if any person (or any persons acting as a group) acquires “Beneficial Ownership” (as defined in the Rights Agreement) of 10%, or 20% in the case of certain passive investors, or more of our outstanding common stock. If Rights become exercisable, all holders of Rights (other than the person, entity or group triggering the Rights Agreement, whose rights will become void and will not be exercisable) will have the right to purchase from the Company for $75.00, subject to certain potential adjustments, shares of our common stock having a market value of twice that amount. On May 30, 2025, the Company entered into Amendment No. 1 to the Stockholder Protection Rights Agreement (the “Amendment”) to extend the expiration time of the Rights for one year from June 4, 2025, to June 4, 2026, unless the Rights are redeemed, exchanged, or terminated in accordance with the terms and conditions of the Rights Agreement. Additional information regarding the Rights Agreement is contained in the Current Reports on Form 8-K filed with the SEC on June 6, 2024, and June 3, 2025, respectively.
The Rights Agreement will cause substantial dilution to any person or group that acquires “Beneficial Ownership” (as defined in the Rights Agreement) of 10%, or 20% in the case of certain passive investors, or more of the Company’s outstanding common stock. As a result, the overall effect of the Rights Agreement and the issuance of the Rights may be to discourage any person, entity or group from gaining a control or control-like position in the Company or engaging in other tactics, potentially disadvantaging the interests of the Company’s stockholders, without negotiating with the Board and without paying an appropriate control premium to all stockholders. The Rights Agreement is similar to plans adopted by other public companies, and it is intended to protect stockholders’ interests, including by providing the Board sufficient time to make informed judgments and take actions that are in the best interests of the Company and its stockholders. Nevertheless, the Rights Agreement may be considered to have certain anti-takeover effects, including potentially discouraging a third-party from attempting to obtain a substantial position in our common stock or seeking to obtain control of the Company and discouraging a takeover attempt that stockholders may consider favorable or that could result in a premium over the market price of our common stock. Even in the absence of a takeover attempt, the Rights Agreement may adversely affect the prevailing market price of our common stock if it is viewed as discouraging takeover attempts in the future.
Future sales of our common stock in the public market or the issuance of equity securities, including in connection with an exercise of the Put Option, could dilute our existing stockholders and adversely affect the trading price of our common stock and our ability to raise funds in future equity offerings.
Sales by us or our stockholders of a substantial number of shares of our common stock in the public markets, or the perception that these sales might occur, could cause the market price of our common stock to decline or could impair our ability to raise capital through a future sale of, or pay for acquisitions or strategic transactions using, our equity securities. If we cannot raise capital on acceptable terms, we may not be able to develop or enhance our products, execute our business plan, take advantage of future opportunities, or respond to competitive pressures, changes in our supplier relationships, or unanticipated customer requirements. Any of these events could adversely affect our business, results of operations and financial condition.
We may issue common stock or other equity securities in the future for a number of reasons, including to finance our operations and business strategy, as part of capital raising activities, as consideration in acquisitions or strategic transactions, or for other purposes. In particular, if Munera exercises the Put Option, we may choose to pay 80% of the Option Purchase Price in preferred stock. Additional issuances of equity securities would dilute the ownership of existing stockholders and could reduce our earnings per share. The lower the trading price of our common stock is at the time Munera exercises the Put Option, the more shares of our stock we will have to issue to Munera if we pay a portion of the Option Purchase Price in stock, and our existing stockholders will experience greater dilution. Additionally, if we issue equity securities, new investors could gain rights, preferences and privileges senior to the holders of our common stock.
We cannot predict the effect, if any, that future sales or issuances of shares of our common stock or other equity securities, or the availability of shares of our common stock or any other equity securities for future sale or issuance, will have on the trading price of our common stock.
34
ITEM 1B. Unresolved Staff Comments
None.
ITEM 1C. Cybersecurity
The Board, in coordination with the Risk Committee, oversees the Company’s risk management program, which includes risks arising from cybersecurity threats. DMC’s Chief Information Officer (“CIO”) , the management position responsible for assessing and managing material risks from cybersecurity threats, manages the Company’s cybersecurity program and is responsible for leading and coordinating cybersecurity activities across the organization. The CIO reports directly to our Chief Financial Officer. Our CIO has extensive experience in cybersecurity, business continuity, disaster recovery and cloud security.
Led by our CIO, we conduct regular assessments to identify potential cybersecurity risks and vulnerabilities, including the evaluation of systems and data assets. We have established internal procedures to stay vigilant against evolving threats by monitoring network traffic and conducting security audits. We also regularly engage independent assessors and external consultants who specialize in cybersecurity to conduct thorough, unbiased evaluations of our systems, policies, and procedures. These assessments help us ensure that our cybersecurity practices are aligned with applicable regulations and standards. To further evaluate our cybersecurity defenses, we periodically commission penetration exercises conducted by specialized firms. These tests simulate real-world attacks and assist in assessing our internal readiness and response capabilities.
Cybersecurity risk updates are provided quarterly to our senior management team by the CIO as part of our enterprise risk management process. We have established a Cybersecurity Incident Response Plan that outlines the process for assessing and responding to cybersecurity incidents. The Board also receives quarterly updates on cybersecurity risks. These reports are typically presented by our CIO to the Risk Committee of the Board and include updates to recently completed cybersecurity initiatives, upcoming plans, an overview of current threats, as well as discussion of our overall cybersecurity maturity and readiness.
35
ITEM 2. Properties
Corporate Headquarters
Our corporate headquarters currently are located in Broomfield, Colorado. The office is also used for NobelClad’s U.S. administrative offices.
| Location | Property Type | Approximate Property Size | Owned/Leased | Expiration Date of Lease (if applicable) | ||||||||||||||||||||||
| Broomfield, Colorado | Corporate and Sales Office | 18,000 sq. ft. | Leased | September 30, 2029, with renewal option for 60 months | ||||||||||||||||||||||
Arcadia Products
Arcadia Products owns a manufacturing site and sales office in Vernon, California and leases other manufacturing and distribution centers throughout the United States. The table below summarizes Arcadia Products’ material properties, including their location, type, size, whether owned or leased and expiration terms, if applicable, as of December 31, 2025.
| Location | Property Type | Approximate Property Size | Owned/Leased | Expiration Date of Lease (if applicable) | ||||||||||||||||||||||
| Vernon, California | Corporate office, metal shop building, warehouse | 27,000 sq. ft. | Owned | |||||||||||||||||||||||
| Land for office, paint shop, anodizing line | 1 acre | Owned | ||||||||||||||||||||||||
| Land for office, paint shop, anodizing line | 2 acres | Leased | May 31, 2046 | |||||||||||||||||||||||
| Vernon, California | Land for parking | 40,000 sq. ft. | Leased | March 31, 2027 | ||||||||||||||||||||||
Vernon, California (1) | Office, paint shop | 112,000 sq. ft. | Leased | December 22, 2026, with renewal option for 60 months | ||||||||||||||||||||||
Vernon, California (1) | Office, warehouse | 111,000 sq. ft. | Leased | December 22, 2026, with renewal option for 60 months | ||||||||||||||||||||||
Hayward, California (1) | Distribution, light assembly | 46,000 sq. ft. | Leased | December 22, 2027 | ||||||||||||||||||||||
West Sacramento, California (1) | Distribution, light assembly | 16,000 sq. ft. | Leased | December 22, 2027 | ||||||||||||||||||||||
Stamford, Connecticut (1) | Office, warehouse | 39,000 sq. ft. | Leased | December 22, 2026, with renewal option for 12 months | ||||||||||||||||||||||
Phoenix, Arizona (1) | Office, warehouse | 52,000 sq. ft. | Leased | December 22, 2026, with renewal option for 24 months | ||||||||||||||||||||||
Las Vegas, Nevada (1) | Office, warehouse | 89,000 sq. ft. | Leased | December 22, 2026, with renewal option for 24 months | ||||||||||||||||||||||
Tucson, Arizona (1) | Office, paint shop, warehouse | 107,000 sq. ft. | Leased | December 22, 2026, with renewal option for 60 months | ||||||||||||||||||||||
| Waipahu, Hawaii | Distribution, light assembly | Building: 13,000 sq. ft. Land: 22,000 sq. ft. | Leased | May 31, 2028 | ||||||||||||||||||||||
| South Gate, California | Office, manufacturing | 46,000 sq. ft. | Leased | December 31, 2027 | ||||||||||||||||||||||
| South Gate, California | Office, manufacturing, storage | Building: 25,000 sq. ft. Land: 45,000 sq. ft. | Leased | April 30, 2027 | ||||||||||||||||||||||
| Houston, Texas | Office, warehouse | 43,000 sq. ft. | Leased | November 30, 2028, with renewal option for 60 months | ||||||||||||||||||||||
| Dallas, Texas | Office, warehouse | 87,000 sq. ft. | Leased | December 31, 2028 | ||||||||||||||||||||||
| Kent, Washington | Distribution, light assembly | 25,000 sq. ft. | Leased | May 31, 2029 | ||||||||||||||||||||||
(1) These leases are with entities affiliated with the holder of the redeemable noncontrolling interest holder and president of Arcadia Products. During the year ended December 31, 2025, DMC recorded $4,666 in lease expense related to these properties.
36
DynaEnergetics
DynaEnergetics leases a manufacturing site and administration office in Troisdorf, Germany. Subsequent to December 31, 2025, the lease for this property was extended effective January 1, 2026, through December 31, 2036, with options to renew the lease which would then extend through December 31, 2046. In the U.S., DynaEnergetics owns manufacturing and assembly sites in Texas and leases storage bunkers and office and warehouse space in various cities throughout Texas. DynaEnergetics also leases office and warehouse space and bunkers for storage of its explosives in Alberta, Canada.
The table below summarizes DynaEnergetics’ material properties, including their location, type, size, whether owned or leased and expiration terms, if applicable, as of December 31, 2025, unless otherwise noted.
| Location | Property Type | Approximate Property Size | Owned/Leased | Expiration Date of Lease (if applicable) | ||||||||||||||||||||||
Troisdorf, Germany (1) | Manufacturing and administration office | 85,000 sq.ft. | Leased | December 31, 2036, with renewal option for 120 months | ||||||||||||||||||||||
| Troisdorf, Germany | Office | 5,000 sq. ft. | Leased | February 28, 2027 | ||||||||||||||||||||||
| Liebenscheid, Germany | Manufacturing and office | 6,000 sq. ft. | Owned | |||||||||||||||||||||||
| Liebenscheid, Germany | Land | 78,000 sq. ft. | Owned | |||||||||||||||||||||||
| Houston, Texas | Office | 11,000 sq. ft. | Leased | November 30, 2026 | ||||||||||||||||||||||
| Blum, Texas | Office, warehouse, and manufacturing | 83,000 sq. ft. | Owned | |||||||||||||||||||||||
Blum, Texas (2) | Warehouse | 10,000 sq. ft. | Owned | |||||||||||||||||||||||
| Blum, Texas | Land for office, warehouse, and manufacturing | 284 acres | Owned | |||||||||||||||||||||||
| Midland, Texas | Land | 13 acres | Leased | April 1, 2029 | ||||||||||||||||||||||
| Whitney, Texas | Warehouse | Building: 30,000 sq ft Land: 4 acres | Leased | October 31, 2029 | ||||||||||||||||||||||
| Whitney, Texas | Office, warehouse, and manufacturing | 36,000 sq. ft. | Owned | |||||||||||||||||||||||
| Alberta, Canada | Office and warehouse | 8,000 sq. ft. | Leased | August 31, 2030 | ||||||||||||||||||||||
(1) Subsequent to December 31, 2025, this lease was extended effective January 1, 2026 through December 31, 2036.
(2) The Blum, Texas warehouse is separate from the main Blum manufacturing campus.
NobelClad
NobelClad owns its principal domestic manufacturing site, which is located in Mount Braddock, Pennsylvania. We currently lease our domestic cladding site located in Dunbar, Pennsylvania to support our Mount Braddock facility. The lease for the Dunbar property will expire on May 6, 2029, but we have options to renew the lease which would then extend through May 6, 2054.
NobelClad owns a manufacturing site in Liebenscheid, Germany as well as a mine used as a cladding site in Dillenburg, Germany. We purchased the buildings and land around the Dillenburg mine in 2022. NobelClad leases the building housing its sales and administrative office in Perpignan, France.
37
The table below summarizes NobelClad’s material properties, including their location, type, size, whether owned or leased and expiration terms, if applicable, as of December 31, 2025.
| Location | Property Type | Approximate Property Size | Owned/Leased | Expiration Date of Lease (if applicable) | ||||||||||||||||||||||
| Mt. Braddock, Pennsylvania | Clad plate manufacturing and administration office | Land: 14 acres Buildings: 101,000 sq. ft. | Owned | |||||||||||||||||||||||
| Dunbar, Pennsylvania | Cladding site | Land: 322 acres Buildings: 16,000 sq. ft. | Leased | May 6, 2029, with renewal options through May 6, 2054. | ||||||||||||||||||||||
Lemont Furnace, Pennsylvania | Manufacturing | 16,000 sq. ft | Leased | November 30, 2027 | ||||||||||||||||||||||
Tautavel, France (1) | Cladding site | 116 acres | Owned | |||||||||||||||||||||||
| Perpignan, France | Administration and sales office | 4,000 sq. ft | Leased | September 30, 2029, with renewal options for additional three-year periods. | ||||||||||||||||||||||
| Burbach-Würgendorf, Germany | Storage | 224 sq. meters | Leased | December 31, 2050 | ||||||||||||||||||||||
| Dillenburg, Germany | Cladding site | Land: 19 acres Buildings: 46,000 sq. ft. | Owned | |||||||||||||||||||||||
| Liebenscheid, Germany | Manufacturing | Land: 10 acres Buildings: 125,000 sq. ft. | Owned | |||||||||||||||||||||||
(1) Though NobelClad is no longer performing manufacturing activities in France, it owns this land in order to have access to a redundant cladding site.
ITEM 3. Legal Proceedings
Refer to Note 13 “Commitments and Contingencies” within Part II, Item 8 — Financial Statements and Supplementary Data.
ITEM 4. Mine Safety Disclosures
Not applicable.
38
PART II
ITEM 5. Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities
Our common stock is publicly traded on The Nasdaq Global Select Market (“Nasdaq”) under the symbol “BOOM.” As of February 17, 2026, there were 165 holders of record of our common stock (does not include beneficial holders of shares held in “street name”).
Equity Compensation Plan
Refer to “Item 12. Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters” for information regarding securities authorized for issuance under our equity compensation plans, which is incorporated in this Item by this reference.
Issuer Purchases of Equity Securities
During the quarter ended December 31, 2025, we purchased shares of our common stock as follows. These shares are held as treasury shares by the Company.
Total number of shares purchased (1) (2) | Average price paid per share | |||||||||||||
October 1 to October 31, 2025 | — | $ | — | |||||||||||
November 1 to November 30, 2025 | 72,348 | $ | 7.85 | |||||||||||
December 1 to December 31, 2025 | — | $ | — | |||||||||||
| Total | 72,348 | $ | 7.85 | |||||||||||
(1) Share purchases during the period were to offset tax withholding obligations that occurred upon the vesting of restricted common stock under the terms of the 2016 Omnibus Incentive Plan and the 2025 Omnibus Incentive Plan, as applicable.
(2) As of December 31, 2025, the maximum number of shares that could be purchased would not exceed the employees’ portion of taxes to be withheld on unvested shares (1,324,752) and potential purchases upon participant elections to diversify equity awards held in the deferred compensation plan (3,139) into other investment options available to participants in the Plan.
39
Stock Performance Graph
The following graph compares the performance of our common stock with the Nasdaq Non-Financial Stocks Index and the Nasdaq Composite (U.S.) Index. The comparison of total return (change in year-end stock price plus reinvested dividends) for each of the years assumes that $100 was invested on December 31, 2020, in each of the Company, the Nasdaq Non-Financial Stocks Index and the Nasdaq Composite (U.S.) Index with investment weighted on the basis of market capitalization. The comparisons in the graph below are based upon historical data and are not indicative of, or intended to forecast, future performance of our common stock.
| Total Return Analysis | December 31, 2020 | December 31, 2021 | December 31, 2022 | December 31, 2023 | December 31, 2024 | December 31, 2025 | ||||||||||||||
| DMC Global Inc. | $100.00 | $91.58 | $44.95 | $43.51 | $16.99 | $15.47 | ||||||||||||||
| Nasdaq Non-Financial Stocks | $100.00 | $116.68 | $94.86 | $133.74 | $168.36 | $203.76 | ||||||||||||||
| Nasdaq Composite (U.S.) | $100.00 | $118.43 | $107.37 | $127.76 | $159.03 | $186.96 | ||||||||||||||
ITEM 6. [Reserved.]
40
ITEM 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations
The following discussion should be read in conjunction with our historical Consolidated Financial Statements and notes included elsewhere in this annual report. A discussion regarding our financial condition and results of operations as well as our liquidity and capital resources for fiscal 2024 compared to fiscal 2023 can be found under Item 7 in our Annual Report on Form 10-K for the fiscal year ended December 31, 2024, which is available on the SEC’s website at www.sec.gov and our Investor Relations website at ir.dmcglobal.com.
Unless stated otherwise, all dollar figures in this report are presented in thousands (000s).
Overview
General
DMC Global Inc. (“DMC”, “we”, “us”, “our”, or the “Company”) operates three manufacturing businesses: Arcadia Products, DynaEnergetics and NobelClad, which produce differentiated products and engineered solutions primarily for the construction, energy, and industrial processing markets. Our businesses seek to capitalize on their product and service differentiation to expand profit margins, increase cash flow and enhance shareholder value. Based in Broomfield, Colorado, DMC’s common stock trades on Nasdaq under the symbol “BOOM.”
Arcadia Products
On December 23, 2021, DMC completed the acquisition of 60% of the membership interests in Arcadia Products, LLC, a Colorado limited liability company resulting from the conversion of Arcadia, Inc. (collectively, “Arcadia Products”). Arcadia Products designs, engineers, fabricates, and finishes aluminum framing systems, windows, curtain walls, storefronts, entrance systems, and interior partitions to the commercial construction market. Additionally, Arcadia Products supplies customized windows and doors to the high-end residential construction market.
Cost of products sold for Arcadia Products includes the cost of aluminum, paint, and other raw materials used in manufacturing as well as employee compensation and benefits, manufacturing facility lease expense, depreciation of manufacturing equipment, supplies and other manufacturing overhead expenses.
DynaEnergetics
DynaEnergetics designs, manufactures, markets and sells perforating systems and associated hardware for the global oil and gas industry. These products are primarily sold to oilfield service companies in the U.S., Europe, Canada, Africa, the Middle East, and Asia. The market for perforating products, which are used during the well completion process, generally corresponds with oil and gas exploration and production activity. Well completion operations are increasingly complex, which in turn has increased the demand for intrinsically-safe, reliable and technically advanced perforating systems.
Cost of products sold for DynaEnergetics includes the cost of metals, explosives and other raw materials used to manufacture shaped charges, detonating products and perforating guns as well as employee compensation and benefits, depreciation of manufacturing facilities and equipment, supplies and other manufacturing overhead expenses.
NobelClad
NobelClad produces explosion-welded clad metal plates for use in the construction of corrosion-resistant industrial processing equipment and specialized transition joints for commuter rail cars, ships, and LNG processing equipment. While most demand for our products is driven by maintenance and retrofit projects at existing plants and facilities, new projects for petrochemical processing, oil refining, and aluminum smelting facilities also account for a significant portion of total demand. These industries tend to be cyclical in nature, and the timing of new order inflow remains difficult to predict.
Cost of products sold for NobelClad includes the cost of metals, explosive powders and other raw materials used to manufacture clad metal plates and transition joints as well as employee compensation and benefits, outside processing costs, depreciation of manufacturing facilities and equipment, manufacturing facility lease expense, supplies and other manufacturing overhead expenses.
41
Factors Affecting Results
•Consolidated net sales were $609,840 in 2025 versus $642,851 in 2024, a decrease of 5%. The decline was primarily attributable to lower sales at DynaEnergetics and NobelClad. The decrease in DynaEnergetics’ sales largely resulted from lower pricing due to industry consolidation and a highly competitive core North American market. The decrease in NobelClad sales was driven by lower activity levels due in part to the impact of evolving tariff policies throughout the year.
•Consolidated gross profit of 22.2% in 2025 decreased from 23.4% in 2024. The decline was primarily attributable to less favorable project and regional mix at NobelClad, as well as lower absorption of fixed manufacturing overhead costs as a result of the decrease in net sales at both DynaEnergetics and NobelClad.
•Consolidated selling, general, and administrative (“SG&A”) expenses were $110,042 in 2025, compared with $108,656 in 2024. The year-over-year increase was primarily attributable to higher net bad debt expense of $1,153, executive transition costs of $520, and professional services fees of $152, partially offset by a decrease in business-related travel of $1,043.
•Net debt, a non-GAAP measure, of $18,746 (comprised of $50,644 of total debt less $31,898 in consolidated cash, cash equivalents and marketable securities) at December 31, 2025, decreased $37,783 from $56,529 at December 31, 2024. The decrease was driven by voluntary credit facility repayments resulting in a reduction in outstanding debt and an increase in consolidated cash, cash equivalents and marketable securities compared with the same period in 2024.
•The Company’s leverage ratio, calculated in accordance with its credit facility, was 1.22x as of December 31, 2025, and 1.35x as of December 31, 2024, in comparison to the maximum ratio permitted of 3.0x for each of the periods. The Company’s adjusted leverage ratio, calculated using net debt as of December 31, 2025, and 2024, was 0.47x, and 1.09x, respectively.
Refer to “Consolidated Results of Operations” and “Business Segment Financial Information” below for additional discussion.
Outlook
Our three manufacturing businesses continue to closely monitor challenging macroeconomic conditions, including volatility in global oil and gas markets, persistently high interest rates, and uncertainty around U.S. and reciprocal tariff policies. DynaEnergetics and NobelClad serve the upstream and downstream segments of the oil and gas industry, respectively, and are addressing the impacts of volatile crude oil prices, which traded near multi-year lows at the end of the fourth quarter of 2025. Sales and profitability could be adversely affected if we, or our customers, are unable to mitigate the effects of sustained lower energy prices and tariffs, or if these factors dampen product demand. For additional information regarding potential tariff impacts, refer to Part I, Item 1A. Risk Factors.
Arcadia Products is working to mitigate the impact of persistently high interest rates and generally lower construction activity in its core regional markets. These factors have created a competitive and challenging bidding environment, which has impacted Arcadia Products’ ability to fully pass through higher input costs, mainly aluminum, which recently reached a multi-year high. While the business continues to focus on strengthening its core commercial operations, which generate approximately 75% of the segment’s sales, the current environment is expected to continue negatively impacting Arcadia Products’ net sales and profitability in 2026.
DynaEnergetics is continuing a series of initiatives designed to reduce costs and increase market share. These efforts are intended to offset a potential decline in demand for its well perforating systems during 2026 due to volatile crude oil prices and reduced well completion activity in DynaEnergetics’ core North American onshore market. DynaEnergetics also is exploring growth opportunities in the enhanced geothermal market, and has expanded its sales and marketing efforts in certain emerging global shale markets.
At NobelClad, we use backlog, defined as unfilled firm purchase orders and commitments at a point in time, to assess near-term demand. Most firm purchase orders and commitments are realized and shipped within twelve months. Order backlog increased to $62,612 at the end of the fourth quarter of 2025 from $57,040 at the end of the third quarter of 2025, reflecting the receipt of additional orders associated with a previously announced record international chemical project. These orders helped offset lower booking activity in NobelClad’s U.S. market, which was negatively impacted during much of 2025, in part due to
42
tariff-related uncertainty. NobelClad is preparing to pursue additional opportunities with the U.S. Navy following its recently announced plans to accelerate its Naval readiness program.
Each of our businesses are evaluating additional tariff mitigation strategies and targeted cost reduction programs if business does not improve as 2026 progresses.
Use of Non-GAAP Financial Measures
In addition to disclosing financial results that are determined in accordance with generally accepted accounting principles in the United States (“GAAP”), the Company also discloses certain non-GAAP financial measures that we use in operational and financial decision making. Non-GAAP financial measures include the following:
•EBITDA: defined as net income (loss) plus net interest, taxes, depreciation and amortization.
•Adjusted EBITDA: excludes from EBITDA stock-based compensation, restructuring expenses and asset impairment charges (if applicable) and, when appropriate, nonrecurring items that management does not utilize in assessing DMC’s operating performance (as further described in the tables below).
•Adjusted EBITDA attributable to DMC Global Inc.: excludes the Adjusted EBITDA attributable to the 40% redeemable noncontrolling interest in Arcadia Products.
•Adjusted EBITDA for DMC business segments: defined as operating income (loss) plus depreciation, amortization, allocated stock-based compensation (if applicable), restructuring expenses and asset impairment charges (if applicable) and, when appropriate, nonrecurring items that management does not utilize in assessing DMC’s operating performance.
•Adjusted net income (loss): defined as net income (loss) attributable to DMC Global Inc. stockholders prior to the adjustment of redeemable noncontrolling interest plus restructuring expenses and asset impairment charges (if applicable) and, when appropriate, nonrecurring items that management does not utilize in assessing DMC’s operating performance.
•Adjusted diluted earnings per share: defined as diluted earnings per share attributable to DMC Global Inc. stockholders (exclusive of adjustment of redeemable noncontrolling interest) plus restructuring expenses and asset impairment charges (if applicable) and, when appropriate, nonrecurring items that management does not utilize in assessing DMC’s operating performance.
•Net debt: defined as total debt less consolidated cash, cash equivalents and marketable securities per the Consolidated Balance Sheets.
Management believes providing these additional financial measures is useful to investors in understanding the Company’s operating performance, excluding the effects of restructuring, asset impairment, and other nonrecurring charges, as well as its liquidity. Management typically monitors the business utilizing the above non-GAAP measures, in addition to GAAP results, to understand and compare operating results across accounting periods, and certain management incentive awards are based, in part, on these measures. The presence of non-GAAP financial measures in this report is not intended to suggest that such measures be considered in isolation or as a substitute for, or as superior to, DMC’s GAAP information, and investors are cautioned that the non-GAAP financial measures are limited in their usefulness. Given that not all companies use identical calculations, DMC’s presentation of non-GAAP financial measures may not be comparable to similarly titled measures of other companies.
43
Consolidated Results of Operations
| 2025 | 2024 | $ change | % change | ||||||||||||||||||||||||||
| Net sales | $ | 609,840 | $ | 642,851 | $ | (33,011) | (5) | % | |||||||||||||||||||||
| Gross profit | 135,253 | 150,569 | (15,316) | (10) | % | ||||||||||||||||||||||||
| Gross profit percentage | 22.2 | % | 23.4 | % | |||||||||||||||||||||||||
| COSTS AND EXPENSES: | |||||||||||||||||||||||||||||
| General and administrative expenses | 61,252 | 61,401 | (149) | — | % | ||||||||||||||||||||||||
| % of net sales | 10.0 | % | 9.6 | % | |||||||||||||||||||||||||
| Selling and distribution expenses | 48,790 | 47,255 | 1,535 | 3 | % | ||||||||||||||||||||||||
| % of net sales | 8.0 | % | 7.4 | % | |||||||||||||||||||||||||
| Amortization of purchased intangible assets | 19,053 | 21,155 | (2,102) | (10) | % | ||||||||||||||||||||||||
| % of net sales | 3.1 | % | 3.3 | % | |||||||||||||||||||||||||
| Goodwill impairment | — | 141,725 | (141,725) | (100) | % | ||||||||||||||||||||||||
Strategic review and related expenses | 2,690 | 7,765 | (5,075) | (65) | % | ||||||||||||||||||||||||
| Restructuring expenses and asset impairments | 3,578 | 2,526 | 1,052 | 42 | % | ||||||||||||||||||||||||
| Operating loss | (110) | (131,258) | 131,148 | (100) | % | ||||||||||||||||||||||||
| Other expense, net | (1,076) | (1,068) | (8) | 1 | % | ||||||||||||||||||||||||
| Interest expense, net | (6,493) | (8,664) | 2,171 | (25) | % | ||||||||||||||||||||||||
| Loss before income taxes | (7,679) | (140,990) | 133,311 | (95) | % | ||||||||||||||||||||||||
| Income tax provision | 4,066 | 10,970 | (6,904) | (63) | % | ||||||||||||||||||||||||
| Net loss | (11,745) | (151,960) | 140,215 | (92) | % | ||||||||||||||||||||||||
| Less: Net income (loss) attributable to redeemable noncontrolling interest | 1,707 | (57,508) | 59,215 | 103 | % | ||||||||||||||||||||||||
| Net loss attributable to DMC Global Inc. | (13,452) | (94,452) | 81,000 | (86) | % | ||||||||||||||||||||||||
| Adjusted EBITDA attributable to DMC Global Inc. | $ | 34,942 | $ | 52,156 | $ | (17,214) | (33) | % | |||||||||||||||||||||
Net sales were $609,840 for the year ended December 31, 2025, a decrease of 5% compared with 2024. The decline was primarily driven by lower sales at DynaEnergetics, which decreased 6%, and at NobelClad, which decreased 11%. The 6% decrease at DynaEnergetics was largely attributable to lower pricing resulting from industry consolidation and a highly competitive core North American market, which reduced net sales by $16,213. DynaEnergetics also experienced a decline in international sales of $1,259 primarily due to project timing. The 11% decrease at NobelClad was driven by lower activity levels due in part to the impact of evolving tariff policies throughout the year.
Gross profit percentage was 22.2% for the year ended December 31, 2025 compared with 23.4% for the year ended December 31, 2024. The decline was primarily attributable to less favorable project and regional mix at NobelClad, as well as lower absorption of fixed manufacturing overhead costs as a result of the decrease in net sales at both DynaEnergetics and NobelClad.
Selling and distribution expenses increased $1,535 for the year ended December 31, 2025, compared with 2024, driven by higher compensation costs at Arcadia Products of $1,357 and higher bad debt expense of $1,153. These increases were partially offset by lower outside services costs of $532, a reduction in business-related travel of $214, and lower selling costs of $109.
Amortization of purchased intangible assets decreased $2,102 for the year ended December 31, 2025, compared with 2024, as the Arcadia Products customer relationship purchased intangible asset is amortized using an accelerated amortization method.
Goodwill impairment of $141,725 for the year ended December 31, 2024 related to the full impairment of Arcadia Products’ goodwill.
Strategic review and related expenses of $2,690 for the year ended December 31, 2025 primarily related to $2,099 in professional service fees and $366 in employee retention compensation, including $36 of stock-based compensation.
44
For the year ended December 31, 2024, strategic review and related expenses of $7,765 related to $4,076 in professional service fees and $2,988 in employee retention compensation, including $372 of stock-based compensation.
Restructuring expenses and asset impairments of $3,578 for the year ended December 31, 2025 included contract termination costs associated with exiting leases of $1,013 and $605 at NobelClad and DynaEnergetics, respectively, employee severance of $1,175 related to headcount reductions across the Company, and an asset impairment of $785 related to the decision to discontinue an internal website and related automation platform.
For the year ended December 31, 2024, restructuring expenses and asset impairments of $2,526 consisted primarily of the abandonment of a planned manufacturing expansion at DynaEnergetics and employee severance costs associated with headcount reductions at DynaEnergetics and Arcadia Products.
Operating loss of $110 for the year ended December 31, 2025, decreased compared with operating loss of $131,258 for the year ended December 31, 2024, primarily attributable to the goodwill impairment charge recorded in 2024, and a reduction in strategic review and related expenses.
Other expense, net of $1,076 in 2025 primarily related to net realized and unrealized foreign currency exchange losses. Currency gains and losses can arise when subsidiaries enter into inter-company and third-party transactions that are denominated in currencies other than their functional currency, including foreign currency forward contracts used to offset foreign exchange rate fluctuations on certain foreign currency denominated asset and liability positions.
Interest expense, net of $6,493 in 2025 decreased 25% compared with 2024, primarily attributable to lower outstanding balances on our credit facility due to voluntary debt repayments during 2025.
Income tax provision of $4,066 was recorded on loss before income taxes of $7,679 for the year ended December 31, 2025. Our most significant operations are in the United States, which has a 21% statutory income tax rate, and Germany, which has a 32% combined statutory income tax rate. The mix of income or loss before income taxes between these jurisdictions is one of the primary drivers of the difference between our 21% statutory tax rate and our effective tax rate. Additionally, the effective rate was impacted unfavorably by state taxes and a valuation allowance in the U.S. which results in no benefit for losses generated domestically.
We recorded an income tax provision of $10,970 on loss before income taxes of $140,990 in 2024, as the loss was primarily driven by the full impairment of Arcadia Products’ goodwill, which did not result in a tax benefit. The effective rate was also impacted unfavorably by income generated in foreign jurisdictions and the establishment of a valuation allowance against U.S. deferred tax assets.
Net loss attributable to DMC Global Inc. in 2025 was $13,452, or $(0.90) per diluted share compared with net loss of $94,452, or $(8.20) per diluted share, in 2024.
45
Adjusted EBITDA decreased in 2025, compared with 2024, due to the factors discussed above. See “Use of Non-GAAP Financial Measures” above for explanation of the use of Adjusted EBITDA. The following is a reconciliation of the most directly comparable GAAP measure to Adjusted EBITDA.
| 2025 | 2024 | ||||||||||||||||
| Net loss | $ | (11,745) | $ | (151,960) | |||||||||||||
| Interest expense, net | 6,493 | 8,664 | |||||||||||||||
| Income tax provision | 4,066 | 10,970 | |||||||||||||||
| Depreciation | 14,904 | 13,891 | |||||||||||||||
| Amortization of purchased intangible assets | 19,053 | 21,155 | |||||||||||||||
| EBITDA | 32,771 | (97,280) | |||||||||||||||
| Stock-based compensation | 5,748 | 6,530 | |||||||||||||||
| Goodwill impairment | — | 141,725 | |||||||||||||||
Strategic review and related expenses | 2,690 | 7,765 | |||||||||||||||
| Restructuring expenses and asset impairments | 3,578 | 2,526 | |||||||||||||||
| CEO transition expenses | 520 | — | |||||||||||||||
| Other expense, net | 1,076 | 1,068 | |||||||||||||||
| Adjusted EBITDA | 46,383 | 62,334 | |||||||||||||||
| Less: adjusted EBITDA attributable to redeemable noncontrolling interest | (11,441) | (10,178) | |||||||||||||||
| Adjusted EBITDA attributable to DMC Global Inc. | $ | 34,942 | $ | 52,156 | |||||||||||||
Adjusted Net (Loss) Income and Adjusted Diluted Earnings Per Share decreased compared with 2024 due to the factors discussed above. See “Use of Non-GAAP Financial Measures” above for explanation of the use of non-GAAP measures. The following is a reconciliation of the most directly comparable GAAP measures to Adjusted Net (Loss) Income and Adjusted Diluted Earnings Per Share.
| Twelve months ended December 31, 2025 | |||||||||||
| Amount | Per Share (1) | ||||||||||
Net loss attributable to DMC Global Inc. (2) | $ | (13,452) | $ | (0.68) | |||||||
Strategic review and related expenses, net of tax | 2,690 | 0.13 | |||||||||
Restructuring expenses and asset impairments, net of tax | 3,308 | 0.17 | |||||||||
Executive transition costs, net of tax | 520 | 0.03 | |||||||||
| As adjusted | $ | (6,934) | $ | (0.35) | |||||||
(1) Calculated using diluted weighted average shares outstanding of 19,912,020.
(2) Net loss attributable to DMC Global Inc. prior to the adjustment of redeemable noncontrolling interest.
| Twelve months ended December 31, 2024 | |||||||||||
| Amount | Per Share (1) | ||||||||||
Net (loss) income attributable to DMC Global Inc. (2) | $ | (94,452) | $ | (4.80) | |||||||
Goodwill impairment, net of tax | 85,035 | 4.32 | |||||||||
Strategic review and related expenses, net of tax | 5,824 | 0.30 | |||||||||
Restructuring expenses and asset impairments, net of tax | 1,674 | 0.08 | |||||||||
Establishment of income tax valuation allowance | 3,900 | 0.20 | |||||||||
| As adjusted | $ | 1,981 | $ | 0.10 | |||||||
(1) Calculated using diluted weighted average shares outstanding of 19,667,673.
(2) Net loss attributable to DMC Global Inc. prior to the adjustment of redeemable noncontrolling interest and deemed dividend.
46
Business Segment Financial Information
We primarily evaluate performance and allocate resources based on segment revenues, operating income (loss) and Adjusted EBITDA as well as projected future performance. Segment operating income (loss) is defined as revenues less expenses identifiable to the segment. DMC consolidated operating income (loss) and Adjusted EBITDA include unallocated corporate expenses and unallocated stock-based compensation expense. Stock-based compensation is not allocated to wholly owned segments, DynaEnergetics and NobelClad. Stock-based compensation is allocated to the Arcadia Products segment as 60% of such expense is attributable to the Company, whereas the remaining 40% is attributable to the redeemable noncontrolling interest holder. Segment operating income (loss) will reconcile to consolidated income (loss) before income taxes by deducting unallocated corporate expenses, unallocated stock-based compensation, other expense, net, and interest expense, net.
Net sales, segment operating income (loss), and Adjusted EBITDA for each segment were as follows for the years ended December 31:
| 2025 | |||||||||||||||||||||||
Arcadia Products | DynaEnergetics | NobelClad | DMC Global Inc. | ||||||||||||||||||||
| Net Sales | $ | 246,208 | $ | 270,214 | $ | 93,418 | $ | 609,840 | |||||||||||||||
| % of Consolidated | 40.4 | % | 44.3 | % | 15.3 | % | |||||||||||||||||
| Operating income (loss) | 4,206 | 10,362 | 9,557 | (110) | |||||||||||||||||||
| Adjusted EBITDA attributable to DMC Global Inc. | $ | 17,161 | $ | 18,485 | $ | 13,992 | $ | 34,942 | |||||||||||||||
| 2024 | |||||||||||||||||||||||
| Arcadia Products | DynaEnergetics | NobelClad | DMC Global Inc. | ||||||||||||||||||||
| Net Sales | $ | 249,763 | $ | 287,686 | $ | 105,402 | $ | 642,851 | |||||||||||||||
| % of Consolidated | 38.8 | % | 44.8 | % | 16.4 | % | |||||||||||||||||
| Operating (loss) income | (143,636) | 16,167 | 20,051 | (131,258) | |||||||||||||||||||
| Adjusted EBITDA attributable to DMC Global Inc. | $ | 15,268 | $ | 24,803 | $ | 23,226 | $ | 52,156 | |||||||||||||||
Arcadia Products
| 2025 | 2024 | $ change | % change | ||||||||||||||||||||||||||
| Net sales | $ | 246,208 | $ | 249,763 | $ | (3,555) | (1) | % | |||||||||||||||||||||
| Gross profit | 66,668 | 67,025 | (357) | (1) | % | ||||||||||||||||||||||||
| Gross profit percentage | 27.1 | % | 26.8 | % | |||||||||||||||||||||||||
| COSTS AND EXPENSES: | |||||||||||||||||||||||||||||
| General and administrative expenses | 25,171 | 30,881 | (5,710) | (18) | % | ||||||||||||||||||||||||
| Selling and distribution expenses | 17,589 | 16,299 | 1,290 | 8 | % | ||||||||||||||||||||||||
| Amortization of purchased intangible assets | 19,053 | 21,111 | (2,058) | (10) | % | ||||||||||||||||||||||||
| Goodwill impairment | — | 141,725 | (141,725) | (100) | % | ||||||||||||||||||||||||
| Restructuring expenses and asset impairments | 649 | 645 | 4 | 1 | % | ||||||||||||||||||||||||
| Operating income (loss) | 4,206 | (143,636) | 147,842 | 103 | % | ||||||||||||||||||||||||
| Adjusted EBITDA | 28,602 | 25,446 | 3,156 | 12 | % | ||||||||||||||||||||||||
| Less: adjusted EBITDA attributable to redeemable noncontrolling interest | (11,441) | (10,178) | (1,263) | 12 | % | ||||||||||||||||||||||||
| Adjusted EBITDA attributable to DMC Global Inc. | $ | 17,161 | $ | 15,268 | $ | 1,893 | 12 | % | |||||||||||||||||||||
47
Net sales decreased $3,555 in 2025, compared with 2024, primarily due to lower sales volumes in longer-cycle high-end residential markets.
General and administrative expenses were lower by $5,710, compared with 2024, primarily as a result of decreases in compensation costs of $2,306 related to a reduction in headcount, stock-based compensation of $1,172, the Waterkeeper matter of $1,152, outside services costs of $601, and business-related travel of $559.
Selling and distribution expenses were higher by $1,290 in 2025, compared with 2024, primarily due to increases in compensation costs of $1,357 and selling costs of $533, partially offset by lower bad debt expense of $448.
Amortization of purchased intangible assets decreased $2,058 in 2025, compared with 2024, as the customer relationship purchased intangible asset is amortized using an accelerated amortization method.
Goodwill impairment of $141,725 in 2024 related to the full impairment of Arcadia Products’ goodwill.
Operating income of $4,206 in 2025 increased compared with operating loss of $143,636 in 2024, primarily attributable to the goodwill impairment charge recorded in 2024, and lower general and administrative expenses.
Adjusted EBITDA increased in 2025, compared with 2024, due to the factors discussed above. See “Use of Non-GAAP Financial Measures” above for explanation of the use of Adjusted EBITDA. The following is a reconciliation of the most directly comparable GAAP measure to Adjusted EBITDA.
| 2025 | 2024 | ||||||||||||||||
| Operating income (loss) | $ | 4,206 | $ | (143,636) | |||||||||||||
| Adjustments: | |||||||||||||||||
| Depreciation | 4,059 | 3,681 | |||||||||||||||
| Amortization of purchased intangible assets | 19,053 | 21,111 | |||||||||||||||
| Stock-based compensation | 635 | 1,920 | |||||||||||||||
| Goodwill impairment | — | 141,725 | |||||||||||||||
| Restructuring expenses and asset impairments | 649 | 645 | |||||||||||||||
| Adjusted EBITDA | $ | 28,602 | $ | 25,446 | |||||||||||||
| Less: adjusted EBITDA attributable to redeemable noncontrolling interest | (11,441) | (10,178) | |||||||||||||||
| Adjusted EBITDA attributable to DMC Global Inc. | $ | 17,161 | $ | 15,268 | |||||||||||||
DynaEnergetics
| 2025 | 2024 | $ change | % change | ||||||||||||||||||||||||||
| Net sales | $ | 270,214 | $ | 287,686 | $ | (17,472) | (6) | % | |||||||||||||||||||||
| Gross profit | 44,123 | 50,055 | (5,932) | (12) | % | ||||||||||||||||||||||||
| Gross profit percentage | 16.3 | % | 17.4 | % | |||||||||||||||||||||||||
| COSTS AND EXPENSES: | |||||||||||||||||||||||||||||
| General and administrative expenses | 10,751 | 10,835 | (84) | (1) | % | ||||||||||||||||||||||||
| Selling and distribution expenses | 22,207 | 21,128 | 1,079 | 5 | % | ||||||||||||||||||||||||
| Amortization of purchased intangible assets | — | 44 | (44) | (100) | % | ||||||||||||||||||||||||
| Restructuring expenses and asset impairments | 803 | 1,881 | (1,078) | (57) | % | ||||||||||||||||||||||||
| Operating income | 10,362 | 16,167 | (5,805) | (36) | % | ||||||||||||||||||||||||
| Adjusted EBITDA | $ | 18,485 | $ | 24,803 | $ | (6,318) | (25) | % | |||||||||||||||||||||
Net sales decreased $17,472 in 2025, compared with 2024, primarily due to lower pricing as a result of industry consolidation and a highly competitive core North American market, which reduced net sales by $16,213. DynaEnergetics also experienced a decline in international sales of $1,259 primarily due to project timing.
48
Gross profit percentage decreased to 16.3% primarily due to lower absorption of fixed manufacturing overhead costs driven by the decrease in net sales.
Selling and distribution expenses were higher by $1,079, compared with 2024, primarily due to an increase in net bad debt expense of $1,549, partially offset by decreased selling costs of $483 driven by lower net sales.
Restructuring expenses and asset impairments of $803 in 2025 included contract termination costs and asset impairment charges associated with exiting a lease totaling $605 and employee severance of $198 related to headcount reductions.
Restructuring expenses and asset impairments of $1,881 in 2024 related to asset impairment charges of $1,104 associated with the abandonment of a planned manufacturing expansion and employee severance of $777 due to headcount reductions.
Operating income of $10,362 in 2025 decreased compared with operating income of $16,167 in 2024, primarily due to a reduction in gross profit.
Adjusted EBITDA decreased in 2025, compared with 2024, due to the factors discussed above. See “Use of Non-GAAP Financial Measures” above for explanation of the use of Adjusted EBITDA. The following is a reconciliation of the most directly comparable GAAP measure to Adjusted EBITDA.
| 2025 | 2024 | ||||||||||||||||
| Operating income | $ | 10,362 | $ | 16,167 | |||||||||||||
| Adjustments: | |||||||||||||||||
| Depreciation | 7,320 | 6,711 | |||||||||||||||
| Amortization of purchased intangible assets | — | 44 | |||||||||||||||
| Restructuring expenses and asset impairments | 803 | 1,881 | |||||||||||||||
| Adjusted EBITDA | $ | 18,485 | $ | 24,803 | |||||||||||||
NobelClad
| 2025 | 2024 | $ change | % change | ||||||||||||||||||||||||||
| Net sales | $ | 93,418 | $ | 105,402 | $ | (11,984) | (11) | % | |||||||||||||||||||||
| Gross profit | 24,741 | 33,811 | (9,070) | (27) | % | ||||||||||||||||||||||||
| Gross profit percentage | 26.5 | % | 32.1 | % | |||||||||||||||||||||||||
| COSTS AND EXPENSES: | |||||||||||||||||||||||||||||
| General and administrative expenses | 5,169 | 4,299 | 870 | 20 | % | ||||||||||||||||||||||||
| Selling and distribution expenses | 8,791 | 9,461 | (670) | (7) | % | ||||||||||||||||||||||||
| Restructuring expenses and asset impairments | 1,224 | — | 1,224 | 100 | % | ||||||||||||||||||||||||
| Operating income | 9,557 | 20,051 | (10,494) | (52) | % | ||||||||||||||||||||||||
| Adjusted EBITDA | $ | 13,992 | $ | 23,226 | $ | (9,234) | (40) | % | |||||||||||||||||||||
Net sales decreased $11,984 in 2025, compared with 2024, reflecting lower activity levels due in part to the impact of evolving tariff policies throughout the year.
Gross profit percentage decreased to 26.5% in 2025 due to a less favorable project and regional mix as well as lower absorption of fixed manufacturing overhead costs as a result of the decrease in net sales described above.
General and administrative expenses increased $870 in 2025, compared with 2024, primarily due to the recognition of a remediation liability at a former European cladding site of $698 and an increase in outside services costs of $170.
Selling and distribution expenses decreased $670 in 2025, compared with 2024, primarily due to lower incentive compensation costs of $226, outside services costs of $201, and business-related travel of $169.
Restructuring expenses and asset impairments of $1,224 in 2025 included contract termination costs associated with exiting a lease totaling $1,013 and employee severance of $211 related to headcount reductions.
49
Operating income of $9,557 in 2025 decreased compared with operating income of $20,051 in 2024, primarily due to a reduction in gross profit.
Adjusted EBITDA decreased in 2025, compared with 2024, due to the factors discussed above. See “Use of Non-GAAP Financial Measures” above for explanation of the use of Adjusted EBITDA. The following is a reconciliation of the most directly comparable GAAP measure to Adjusted EBITDA.
| 2025 | 2024 | ||||||||||||||||
| Operating income | $ | 9,557 | $ | 20,051 | |||||||||||||
| Adjustments: | |||||||||||||||||
| Depreciation | 3,211 | 3,175 | |||||||||||||||
| Restructuring expenses and asset impairments | 1,224 | — | |||||||||||||||
| Adjusted EBITDA | $ | 13,992 | $ | 23,226 | |||||||||||||
Liquidity and Capital Resources
We have historically financed our operations from a combination of internally generated cash flow, revolving credit borrowings, and various long-term debt arrangements. Our net debt position was $18,746 at December 31, 2025, compared with $56,529 at December 31, 2024. The decrease in net debt was primarily due to cash flow generated from operations, which resulted in net credit facility repayments of $20,521.
We believe that cash and cash equivalents on hand, cash flow from operations, funds available under our current credit facilities and any future replacement thereof will be sufficient to fund the working capital, required minimum debt service payments, and other capital expenditure requirements of our current business operations for the foreseeable future. We may also execute capital markets transactions, including at-the-market offering programs, to raise additional funds if we believe market conditions are favorable, but there can be no assurance that any future capital will be available on acceptable terms or at all. Nevertheless, our ability to generate sufficient cash flows from operations will depend upon our success in executing our strategies. If we are unable to (i) realize sales from our backlog; (ii) secure new customer orders; (iii) continue selling products at profitable margins; and (iv) continue to implement cost-effective internal processes, our ability to meet cash requirements through operating activities could be impacted. Furthermore, any restriction on the availability of borrowings under our credit facilities could negatively affect our ability to meet future cash requirements. We will continue to monitor our short-term and long-term liquidity needs, which could be affected by financial market conditions, including the related impact on credit availability and capital markets.
Debt facilities
On February 6, 2024, the Company and certain domestic subsidiaries entered into an amendment (the “First Amendment”) to its existing credit agreement with a syndicate of banks, led by KeyBank National Association (the “credit facility”). The First Amendment provided for certain changes to the credit facility and increased the maximum commitment amount from $200,000 to $300,000. The credit facility originally allowed for revolving loans of up to $200,000, a $50,000 term loan facility, and a $50,000 delayed draw term loan (“DDTL”) facility. On February 6, 2026, the ability of the Company to access the $50,000 DDTL facility expired per the terms of the First Amendment. The $50,000 term loan facility outstanding is payable in installments of $625 per quarter through March 31, 2026. Quarterly term loan payments increase to $938 on June 30, 2026, through March 31, 2028, and increase to $1,250 from June 30, 2028, through December 31, 2028. A balloon payment for the outstanding term loan balance is due upon the credit facility maturity date of February 6, 2029. The credit facility retains a $100,000 accordion feature to increase the commitments under the revolving loan and/or by adding one or more term loans subject to approval by the applicable lenders. The credit facility is secured by certain assets of DMC including accounts receivable, inventory, and fixed assets, including Arcadia Products and its subsidiary, as well as guarantees and share pledges by DMC and its subsidiaries.
Borrowings under the $200,000 revolving loan limit and $50,000 term loan can be in the form of Adjusted Daily Simple Secured Overnight Financing Rate (“SOFR”) loans or one month Adjusted Term SOFR loans. Additionally, U.S. dollar borrowings on the revolving loan can be in the form of Base Rate loans (Base Rate borrowings are based on the greater of the administrative agent’s Prime rate, an adjusted Federal Funds rate or an adjusted SOFR rate). SOFR loans bear interest at the applicable SOFR rate plus an applicable margin (varying from 2.25% to 3.25%). Base Rate loans bear interest at the defined Base Rate plus an applicable margin (varying from 1.25% to 2.25%).
50
The credit facility includes various covenants and restrictions, certain of which relate to the payment of dividends or other distributions to stockholders; redemption of capital stock; incurring additional indebtedness; mortgaging, pledging or disposition of major assets; and maintenance of specified ratios. As of December 31, 2025, we were in compliance with all financial covenants and other provisions of our debt agreements.
The leverage ratio is defined in the credit facility as the ratio of Consolidated Funded Indebtedness (as defined in the credit facility) on the last day of any trailing four quarter period to Consolidated EBITDA (as defined in the credit facility) for such period. The maximum leverage ratio currently permitted by our credit facility is 3.0 to 1.0; provided, however, that the Second Amendment (as defined below) provides for a temporary increase in the maximum leverage ratio under certain circumstances as described below. The actual leverage ratio as of December 31, 2025 was 1.22 to 1.0.
The debt service coverage ratio is defined in the credit facility as the ratio of Consolidated EBITDA less the sum of capital distributions paid in cash (other than those made with respect to preferred stock issued under the Operating Agreement), Consolidated Unfunded Capital Expenditures (as defined in the credit facility), and net cash income taxes divided by the sum of cash interest expense, any dividends on the preferred stock paid in cash, and scheduled principal payments on funded indebtedness. Under our credit facility, the minimum debt service coverage ratio permitted is 1.25 to 1.0. The actual debt service coverage ratio for the trailing twelve months ended December 31, 2025, was 3.28 to 1.0.
On June 10, 2025, the Company and certain domestic subsidiaries entered into an amendment to the credit facility (the “Second Amendment”). The Second Amendment provided for certain changes to the credit facility, including modifications to the Company’s financial covenants and applicable interest rates to assist with the possible acquisition of the remaining 40% minority interest in Arcadia Products. Key provisions of the Second Amendment include a temporary increase in the Company’s maximum leverage ratio to 3.5x adjusted EBITDA over the trailing twelve months — up from 3.0x — should either the Put Option or the Call Option be exercised. This elevated leverage limit will apply for the first two quarters following payment of the purchase price of the Put Option or the Call Option, followed by a reduction to 3.25x in the third quarter, and a return to 3.0x thereafter.
As of December 31, 2025, borrowings of $45,625 on the term loan under our credit facility were outstanding, and $6,375 was outstanding on the revolver.
We also maintain a line of credit with a German bank for certain European operations. This line of credit provides a borrowing capacity of €7,000. As of December 31, 2025, we had no outstanding borrowings, and bank guarantees of €3,074 were secured.
Redeemable noncontrolling interest
The Operating Agreement for Arcadia Products contains a right for the Company to purchase the remaining interest in Arcadia Products from the minority interest holder on or after December 23, 2024 (“Call Option”). The minority interest holder of Arcadia Products also has the right to sell its remaining interest in Arcadia Products to the Company (“Put Option”). On December 3, 2024, the Company and minority interest holder entered into an amendment to the Operating Agreement whereby the minority interest holder agreed not to exercise the Put Option until on or after September 6, 2026.
The purchase price for any interests sold pursuant to the Call Option or Put Option continues to be based upon a predefined calculation as included within the Operating Agreement. In connection with an exercise of the Call Option, the Operating Agreement would require payment of the purchase price in cash. However, in connection with the exercise of the Put Option, the Operating Agreement permits the Company the option to pay the purchase price in either cash, or 20% in cash and 80% in shares of a newly designated series of preferred stock (the “Put Preferred”) that would be authorized at that time. The terms of the Put Preferred, including the rights, powers and preferences thereof, are set forth in the Operating Agreement. The number of shares to be issued in connection with the Put Option (if the Company utilizes that payment mechanism) would be initially determined and valued at the volume weighted average trading price of the Company’s common stock over the 60 days preceding the delivery of the Put Option notice. The Put Preferred would be entitled to dividends at a rate of 3% per annum and would be convertible into one share of the Company’s common stock, subject to Nasdaq rules which generally prohibit private placements of equity securities with voting rights of 20% or more of a company’s pre-issuance voting power, including through convertible securities, without stockholder approval; the holder of the Put Preferred would not be allowed to participate in any such stockholder vote. The Company may redeem the Put Preferred at any time; however, beginning on June 23, 2027, the Company must begin proportionate annual redemptions of the Put Preferred and, in any event, the Put Preferred must be redeemed by the third anniversary of its issuance.
51
As of December 31, 2025, the value of the redeemable noncontrolling interest under the Operating Agreement was $187,080. Upon settlement, consideration paid will be net of the $24,902 promissory note outstanding due from the redeemable noncontrolling interest holder and is subject to potential working capital adjustments. Refer to Note 2 “Significant Accounting Policies” within Part II, Item 8 — Financial Statements and Supplementary Data for further information related to the valuation of the redeemable noncontrolling interest and promissory note outstanding. We are currently evaluating options for financing the purchase of the noncontrolling interest, which may include cash generated from operations, borrowings under the credit facility, and/or proceeds from debt or equity issuances. Debt financing could materially impact the Company’s leverage while equity financing could materially dilute existing stockholders.
Other contractual obligations and commitments
The table below presents principal cash flows by expected maturity dates for our debt obligations and other contractual obligations and commitments as of December 31, 2025:
| Payment Due by Period | ||||||||||||||||||||||||||||||||
| As of December 31, 2025 | ||||||||||||||||||||||||||||||||
| Less than | More than | |||||||||||||||||||||||||||||||
| Other Contractual Obligations | 1 Year | 2027 - 2028 | 2029 - 2030 | 5 Years | Total | |||||||||||||||||||||||||||
Credit facility (1) | $ | 3,438 | $ | 8,438 | $ | 40,124 | $ | — | $ | 52,000 | ||||||||||||||||||||||
Operating lease obligations (2) | 10,171 | 16,658 | 8,381 | 18,778 | 53,988 | |||||||||||||||||||||||||||
Purchase obligations (3) | 53,927 | — | — | — | 53,927 | |||||||||||||||||||||||||||
Total (4) | $ | 67,536 | $ | 25,096 | $ | 48,505 | $ | 18,778 | $ | 159,915 | ||||||||||||||||||||||
(1) Represents outstanding borrowings under our credit facility but excludes future interest expense on outstanding credit facility borrowings. For more information about our debt obligations, refer to Note 7 “Debt” within Part II, Item 8 — Financial Statements and Supplementary Data.
(2) The operating lease obligations presented reflect future minimum lease payments due under non-cancelable portions of our leases as of December 31, 2025. Our operating lease obligations are described in Note 6 “Leases” within Part II, Item 8 — Financial Statements and Supplementary Data.
(3) Amounts represent firm commitments to purchase goods or services to be utilized in the normal course of business. These amounts are not reflected in the Consolidated Balance Sheets.
(4) The above table does not include amounts potentially payable upon exercise of the Put Option or Call Option associated with the redeemable noncontrolling interest.
Cash flows from operating activities
Net cash provided by operating activities of $53,534 in 2025 increased compared with $46,596 in 2024, driven primarily by lower working capital balances, which included lower accounts receivable, and lower inventory balances at Arcadia Products and NobelClad.
Cash flows from investing activities
Net cash used in investing activities in 2025 of $6,564 was attributable to the acquisition, net of proceeds received, of property, plant and equipment of $10,731, partially offset by the settlement of a note receivable of $4,167.
Net cash used in investing activities in 2024 of $3,569 was attributable to the acquisition, net of proceeds received, of property, plant and equipment of $16,188, partially offset by proceeds from the sales and maturities of marketable securities of $12,619.
Cash flows from financing activities
Net cash used in financing activities in 2025 of $28,736 included net credit facility repayments of $20,521, distributions to the redeemable noncontrolling interest holder of $6,400, payment of debt issuance costs of $650, and treasury stock purchases of $1,165.
52
Net cash used in financing activities in 2024 of $59,788 primarily included net credit facility repayments of $45,000, distributions to the redeemable noncontrolling interest holder of $8,445, payment of debt issuance costs of $2,735, payment of a deemed dividend to the redeemable noncontrolling interest holder of $2,500, and treasury stock purchases of $1,240.
Payment of dividends
Any determination to pay cash dividends is at the discretion of the Board of Directors. Future dividends may be affected by, among other items, our views on potential future capital requirements, future business prospects, debt covenant compliance considerations, changes in income tax laws, and any other factors that our Board of Directors deems relevant.
Critical Accounting Estimates
Our Consolidated Financial Statements contain information that is pertinent to management’s discussion and analysis of results of operations and financial condition. Preparation of financial statements in conformity with generally accepted accounting principles in the United States requires that management make estimates, judgments and assumptions that affect the amounts reported for revenues, expenses, assets, liabilities, and other related disclosures.
Our critical accounting estimates, described below, are important to the portrayal of our results of operations and financial condition. Management’s judgments and estimates in these areas are based on information available and at times require management to make difficult, subjective, and complex judgments. Actual results may or may not differ from these estimates.
Inventories
Inventories are stated at the lower-of-cost (first-in, first-out) or net realizable value. Significant cost elements included in inventory are raw materials, labor, freight, subcontract costs, and manufacturing overhead. As necessary, we write down inventory to its net realizable value by recording provisions for excess, slow moving and obsolete inventory. To determine provision amounts, we regularly review inventory quantities on hand and values, and compare them to estimates of future product demand, market conditions, production requirements and technological developments. If assumptions about future demand change and/or actual market conditions are less favorable than those projected by the Company, additional write-downs of inventories may be required.
Asset impairments
Finite-lived assets, including purchased intangible assets, property, plant and equipment, and right-of-use assets, are tested for impairment whenever events or changes in circumstances indicate that their carrying value may not be recoverable. We compare the expected undiscounted future operating cash flows associated with applicable assets or asset groupings to their respective carrying values to determine if they are fully recoverable when indicators of impairment are present. If the expected future operating cash flows of an asset or asset grouping are not sufficient to recover the related carrying value, we estimate the fair value of the asset or asset grouping. Impairment is recognized when the carrying amount of the asset or asset grouping is not recoverable and when carrying value exceeds the estimated fair value.
The net carrying value of our purchased intangible assets as of December 31, 2025, was $155,051, which is entirely related to Arcadia Products. The net carrying values of our property, plant and equipment and right-of-use assets as of December 31, 2025, were $127,358 and $36,018, respectively. During the year ended December 31, 2025, we recorded impairment charges on our property, plant and equipment of $1,081 primarily related to a $785 charge associated with a decision to discontinue an internal website and related automation platform.
Income taxes
We recognize deferred tax assets and liabilities for the expected future income tax consequences of temporary differences between the financial reporting and tax bases of assets and liabilities. Deferred tax assets are recognized for the expected future effects of all deductible temporary differences to the extent we believe these assets will more likely than not be realized. We record a valuation allowance when, based on current circumstances, it is more likely than not that all or a portion of the deferred tax assets will not be realized. In making such determination, we consider all available positive and negative evidence, including future reversals of existing taxable temporary differences, projected future taxable income, tax planning strategies, recent financial performance and existing valuation allowances, if any. As of December 31, 2025, we were in a three-year cumulative loss position at the consolidated financial statement level, driven by losses in the U.S. primarily related to the impairment of Arcadia Products’ goodwill in 2024. Accordingly, we have maintained the previously established valuation
53
allowance against the corresponding net deferred tax assets in the U.S. We also have a valuation allowance recorded against deferred tax assets in certain of our foreign jurisdictions. As of December 31, 2025, we have recorded a consolidated valuation allowance of $35,323.
We recognize the tax benefits from uncertain tax positions only when it is more likely than not, based on the technical merits of the position, that the tax position will be sustained upon examination, including the resolution of any related appeals or litigation. The tax benefits recognized in the Consolidated Financial Statements from such a position are measured as the largest benefit that is more likely than not to be realized upon ultimate resolution. As of December 31, 2025, we have an uncertain tax position liability of $5,725 recorded in our Consolidated Balance Sheet related to tax positions taken in prior periods.
Off Balance Sheet Arrangements
At December 31, 2025, we had no off-balance sheet arrangements, as defined by SEC rules, that have or are reasonably likely to have a material current or future effect on our financial condition, revenues or expenses, results of operations, liquidity, capital expenditures or capital resources.
Recent Accounting Pronouncements
Refer to Note 2 “Significant Accounting Policies” within Part II, Item 8 — Financial Statements and Supplementary Data in this report for a discussion, as applicable, of recent accounting pronouncements and their anticipated effect on our business.
ITEM 7A. Quantitative and Qualitative Disclosures about Market Risk
Foreign Currency Risk
Our Consolidated Financial Statements are expressed in U.S. dollars, but a portion of our business is conducted in currencies other than U.S. dollars. Changes in the exchange rates for such currencies into U.S. dollars can affect our revenues, earnings, and the carrying value of our assets and liabilities in our Consolidated Balance Sheets, either positively or negatively. Sales made in currencies other than U.S. dollars accounted for 10%, 11%, and 9% of total sales for the years ended 2025, 2024, and 2023, respectively. As a result of foreign currency risk, we may experience economic loss and a negative impact on earnings and equity with respect to our holdings solely as a result of foreign currency exchange rate fluctuations. Our primary exposure to foreign currency risk is the Euro due to the percentage of our U.S. dollar revenue that is derived from countries where the Euro is the functional currency.
We use foreign currency forward contracts to offset foreign exchange rate fluctuation on foreign currency denominated asset and liability positions. Foreign currency forward contracts are sensitive to changes in foreign currency exchange rates. Consistent with the use of these contracts to neutralize the effect of exchange rate fluctuations, such unrealized gains or losses would be offset by corresponding gains or losses, respectively, in the remeasurement of the asset and liability positions being hedged. As such, these forward currency contracts and the offsetting underlying asset and liability positions do not create material market risk. The net notional amount of the foreign exchange contracts at December 31, 2025, and 2024, was $10,858 and $8,331, respectively.
Interest Rate Risk
The Company’s interest expense is sensitive to the general level of interest rates in North America and Europe. At December 31, 2025, all of the Company’s debt was subject to variable interest rates. A one percentage point increase in average interest rates would cause interest expense, net in 2025 to increase by $700. This was determined by considering the impact of a hypothetical interest rate on the Company’s average outstanding variable debt. This analysis does not consider the effect of the level of overall economic activity that could exist. In the event of a change in the level of economic activity, which may adversely impact interest rates, the Company could likely take actions to further mitigate any potential negative exposure to the change. However, due to the uncertainty of the specific actions that might be taken and their possible effects, the sensitivity analysis assumes no changes in the Company’s financial structure.
54
ITEM 8. Financial Statements and Supplementary Data
DMC GLOBAL INC.
INDEX TO CONSOLIDATED FINANCIAL STATEMENTS
As of December 31, 2025 and 2024 and for Each of the Years Ended
December 31, 2025, 2024 and 2023
| Page | ||||||||
| Financial Statements: | ||||||||
55
Report of Independent Registered Public Accounting Firm
To the Stockholders and the Board of Directors of DMC Global Inc.
Opinion on the Financial Statements
We have audited the accompanying consolidated balance sheets of DMC Global Inc. (the Company) as of December 31, 2025 and 2024, the related consolidated statements of operations, comprehensive (loss) income, stockholders’ equity and redeemable noncontrolling interest and cash flows for each of the three years in the period ended December 31, 2025, and the related notes (collectively referred to as the “consolidated financial statements”). In our opinion, the consolidated financial statements present fairly, in all material respects, the financial position of the Company at December 31, 2025 and 2024, and the results of its operations and its cash flows for each of the three years in the period ended December 31, 2025, in conformity with U.S. generally accepted accounting principles.
We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States) (PCAOB), the Company’s internal control over financial reporting as of December 31, 2025, based on criteria established in Internal Control—Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (2013 framework), and our report dated February 23, 2026 expressed an unqualified opinion thereon.
Basis for Opinion
These financial statements are the responsibility of the Company’s management. Our responsibility is to express an opinion on the Company’s financial statements based on our audits. We are a public accounting firm registered with the PCAOB and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.
We conducted our audits in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement, whether due to error or fraud. Our audits included performing procedures to assess the risks of material misstatement of the financial statements, whether due to error or fraud, and performing procedures that respond to those risks. Such procedures included examining, on a test basis, evidence regarding the amounts and disclosures in the financial statements. Our audits also included evaluating the accounting principles used and significant estimates made by management, as well as evaluating the overall presentation of the financial statements. We believe that our audits provide a reasonable basis for our opinion.
Critical Audit Matter
The critical audit matter communicated below is a matter arising from the current period audit of the financial statements that was communicated or required to be communicated to the audit committee and that: (1) relates to accounts or disclosures that are material to the financial statements and (2) involved our especially challenging, subjective or complex judgments. The communication of the critical audit matter does not alter in any way our opinion on the consolidated financial statements, taken as a whole, and we are not, by communicating the critical audit matter below, providing a separate opinion on the critical audit matter or on the accounts or disclosures to which it relates.
56
Evaluation of net realizable value adjustments to DynaEnergetics inventories for excess or obsolescence
| Description of the Matter | At December 31, 2025, the Company’s DynaEnergetics’ inventories were $58.2 million. As described in Note 3 to the consolidated financial statements, inventories are stated at the lower of cost (first-in, first-out) or net realizable value. Write-downs of inventories to net realizable value for excess, slow moving and obsolete inventory are based upon inventory quantities on hand and values, compared to estimated future product demand, market conditions, production requirements and technological developments. Auditing management’s lower of cost or net realizable value determination for DynaEnergetics excess or obsolete inventories was especially challenging and highly judgmental because the estimates rely on factors that are affected by market and economic conditions outside of the Company’s control. In particular, the excess and obsolete inventory calculations are sensitive to future demand for the Company’s products. | |||||||||||||
| How We Addressed the Matter in Our Audit | We obtained an understanding, evaluated the design and tested the operating effectiveness of controls over the Company’s determination of the lower of cost or net realizable value for excess and obsolete inventories. For example, we tested controls over management’s review of excess and obsolete inventories which includes their review of the age of inventory, assumptions and data supporting current and future product demand, including consideration of recent inventory turnover. Our audit procedures to test the net realizable value adjustments to inventories for excess or obsolescence included, among others, testing the completeness and accuracy of the underlying data used in management’s assessment. We evaluated the appropriateness and consistency of management’s methods and assumptions used in the forecasted sales of inventory on hand, including consideration of aged inventory. We held discussions with senior financial and operating management to determine whether any strategic or operational changes in the business would impact expected demand or related carrying value of on-hand inventory. We assessed the reasonableness of management’s excess and obsolescence assumptions by comparing those assumptions to historical data and trends, as well as third-party market information which addresses expected subsequent period trends in the industry, including trends that could impact the movement of on-hand inventory sold by the Company. | |||||||||||||
/s/ | |||||
We have served as the Company’s auditor since 2002. | |||||
February 23, 2026 | |||||
57
DMC GLOBAL INC.
CONSOLIDATED BALANCE SHEETS
(Amounts in Thousands, Except Share and Per Share Data)
| As of December 31, | |||||||||||
| 2025 | 2024 | ||||||||||
| ASSETS | |||||||||||
| Current assets: | |||||||||||
| Cash and cash equivalents | $ | $ | |||||||||
Accounts receivable, net of allowance for doubtful accounts of $ | |||||||||||
| Inventories | |||||||||||
| Prepaid expenses and other | |||||||||||
| Total current assets | |||||||||||
| Property, plant and equipment | |||||||||||
| Less - accumulated depreciation | ( | ( | |||||||||
| Property, plant and equipment, net | |||||||||||
| Purchased intangible assets, net | |||||||||||
| Deferred tax assets | |||||||||||
| Other assets | |||||||||||
| Total assets | $ | $ | |||||||||
LIABILITIES, REDEEMABLE NONCONTROLLING INTEREST, AND STOCKHOLDERS’ EQUITY | |||||||||||
| Current liabilities: | |||||||||||
| Accounts payable | $ | $ | |||||||||
| Accrued expenses | |||||||||||
| Accrued income taxes | |||||||||||
| Accrued employee compensation and benefits | |||||||||||
| Contract liabilities | |||||||||||
| Current portion of long-term debt | |||||||||||
| Other current liabilities | |||||||||||
| Total current liabilities | |||||||||||
| Long-term debt | |||||||||||
| Deferred tax liabilities | |||||||||||
| Other long-term liabilities | |||||||||||
| Total liabilities | |||||||||||
Commitments and Contingencies (Note 13) | |||||||||||
| Redeemable noncontrolling interest | |||||||||||
Stockholders’ equity: | |||||||||||
Preferred stock, $ | |||||||||||
Common stock, $ | |||||||||||
| Additional paid-in capital | |||||||||||
| Retained (deficit) earnings | ( | ||||||||||
| Other cumulative comprehensive loss | ( | ( | |||||||||
Treasury stock, at cost, and company stock held for deferred compensation, at par; | ( | ( | |||||||||
Total stockholders’ equity | |||||||||||
Total liabilities, redeemable noncontrolling interest, and stockholders’ equity | $ | $ | |||||||||
The accompanying notes are an integral part of these Consolidated Financial Statements.
58
DMC GLOBAL INC.
CONSOLIDATED STATEMENTS OF OPERATIONS
(Amounts in Thousands, Except Share and Per Share Data)
| Year Ended December 31, | |||||||||||||||||
| 2025 | 2024 | 2023 | |||||||||||||||
| Net sales | $ | $ | $ | ||||||||||||||
| Cost of products sold | |||||||||||||||||
| Gross profit | |||||||||||||||||
| Costs and expenses: | |||||||||||||||||
| General and administrative expenses | |||||||||||||||||
| Selling and distribution expenses | |||||||||||||||||
| Amortization of purchased intangible assets | |||||||||||||||||
| Goodwill impairment | |||||||||||||||||
Strategic review and related expenses | |||||||||||||||||
| Restructuring expenses and asset impairments | |||||||||||||||||
| Total costs and expenses | |||||||||||||||||
| Operating (loss) income | ( | ( | |||||||||||||||
| Other expense | |||||||||||||||||
| Other expense, net | ( | ( | ( | ||||||||||||||
| Interest expense, net | ( | ( | ( | ||||||||||||||
| (Loss) income before income taxes | ( | ( | |||||||||||||||
| Income tax provision | |||||||||||||||||
| Net (loss) income | ( | ( | |||||||||||||||
| Less: Net income (loss) attributable to redeemable noncontrolling interest | ( | ||||||||||||||||
| Net (loss) income attributable to DMC Global Inc. stockholders | $ | ( | $ | ( | $ | ||||||||||||
| Net (loss) income per share attributable to DMC Global Inc. stockholders: | |||||||||||||||||
| Basic | $ | ( | $ | ( | $ | ||||||||||||
| Diluted | $ | ( | $ | ( | $ | ||||||||||||
Weighted average shares outstanding: | |||||||||||||||||
| Basic | |||||||||||||||||
| Diluted | |||||||||||||||||
Reconciliation to net (loss) income attributable to DMC Global Inc. stockholders after adjustment of redeemable noncontrolling interest for purposes of calculating earnings per share:
| Year Ended December 31, | |||||||||||||||||
| 2025 | 2024 | 2023 | |||||||||||||||
| Net (loss) income attributable to DMC Global Inc. stockholders | $ | ( | $ | ( | $ | ||||||||||||
| Adjustment of redeemable noncontrolling interest | ( | ( | ( | ||||||||||||||
| Deemed dividend | ( | ||||||||||||||||
| Net (loss) income attributable to DMC Global Inc. stockholders after adjustment of redeemable noncontrolling interest | $ | ( | $ | ( | $ | ||||||||||||
The accompanying notes are an integral part of these Consolidated Financial Statements.
59
DMC GLOBAL INC.
CONSOLIDATED STATEMENTS OF COMPREHENSIVE (LOSS) INCOME
(Amounts in Thousands)
| Year Ended December 31, | |||||||||||||||||
| 2025 | 2024 | 2023 | |||||||||||||||
| Net (loss) income | $ | ( | $ | ( | $ | ||||||||||||
| Change in cumulative foreign currency translation adjustment | ( | ||||||||||||||||
| Other comprehensive (loss) income | $ | ( | $ | ( | $ | ||||||||||||
| Less: comprehensive income (loss) attributable to redeemable noncontrolling interest | ( | ||||||||||||||||
| Comprehensive (loss) income attributable to DMC Global Inc. stockholders | $ | ( | $ | ( | $ | ||||||||||||
The accompanying notes are an integral part of these Consolidated Financial Statements.
60
DMC GLOBAL INC.
CONSOLIDATED STATEMENTS OF STOCKHOLDERS’ EQUITY AND REDEEMABLE NONCONTROLLING INTEREST
(Amounts in Thousands, Except Share Data)
| Other | Treasury Stock, at cost, and | Total | Redeemable | ||||||||||||||||||||||||||||||||||||||||||||||||||
| Additional | Retained | Cumulative | Company Stock Held for | DMC Global Inc. | Non- | ||||||||||||||||||||||||||||||||||||||||||||||||
| Common Stock | Paid-In | Earnings | Comprehensive | Deferred Compensation, at par | stockholders’ | Controlling | |||||||||||||||||||||||||||||||||||||||||||||||
| Shares | Amount | Capital | (Deficit) | Loss | Shares | Amount | equity | Interest | |||||||||||||||||||||||||||||||||||||||||||||
| Balances, December 31, 2022 | $ | $ | $ | $ | ( | ( | $ | ( | $ | $ | |||||||||||||||||||||||||||||||||||||||||||
| Net income | — | — | — | — | — | — | |||||||||||||||||||||||||||||||||||||||||||||||
| Change in cumulative foreign currency translation adjustment | — | — | — | — | — | — | — | ||||||||||||||||||||||||||||||||||||||||||||||
| Shares issued in connection with stock compensation plans | — | — | — | — | — | ||||||||||||||||||||||||||||||||||||||||||||||||
| Stock-based compensation | — | — | — | — | — | — | |||||||||||||||||||||||||||||||||||||||||||||||
| Distribution to redeemable noncontrolling interest holder | — | — | — | — | — | — | — | — | ( | ||||||||||||||||||||||||||||||||||||||||||||
| Adjustment of redeemable noncontrolling interest | — | — | — | ( | — | — | — | ( | |||||||||||||||||||||||||||||||||||||||||||||
| Treasury stock activity | — | — | — | — | — | ( | ( | ( | — | ||||||||||||||||||||||||||||||||||||||||||||
| Balances, December 31, 2023 | $ | $ | $ | $ | ( | ( | $ | ( | $ | $ | |||||||||||||||||||||||||||||||||||||||||||
| Net loss | — | — | — | ( | — | — | — | ( | ( | ||||||||||||||||||||||||||||||||||||||||||||
| Change in cumulative foreign currency translation adjustment | — | — | — | — | ( | — | — | ( | — | ||||||||||||||||||||||||||||||||||||||||||||
| Shares issued in connection with stock compensation plans | — | — | — | — | — | ||||||||||||||||||||||||||||||||||||||||||||||||
| Stock-based compensation | — | — | — | — | — | — | |||||||||||||||||||||||||||||||||||||||||||||||
Deemed dividend | — | — | — | ( | — | — | — | ( | — | ||||||||||||||||||||||||||||||||||||||||||||
| Distribution to redeemable noncontrolling interest holder | — | — | — | — | — | — | — | — | ( | ||||||||||||||||||||||||||||||||||||||||||||
| Adjustment of redeemable noncontrolling interest | — | — | ( | ( | — | — | — | ( | |||||||||||||||||||||||||||||||||||||||||||||
| Treasury stock activity | — | — | — | — | — | ( | ( | ( | — | ||||||||||||||||||||||||||||||||||||||||||||
| Balances, December 31, 2024 | $ | $ | $ | $ | ( | ( | $ | ( | $ | $ | |||||||||||||||||||||||||||||||||||||||||||
| Net (loss) income | — | — | — | ( | — | — | — | ( | |||||||||||||||||||||||||||||||||||||||||||||
| Change in cumulative foreign currency translation adjustment | — | — | — | — | — | — | — | ||||||||||||||||||||||||||||||||||||||||||||||
| Shares issued in connection with stock compensation plans | ( | — | — | — | — | — | |||||||||||||||||||||||||||||||||||||||||||||||
| Stock-based compensation | — | — | — | — | — | — | |||||||||||||||||||||||||||||||||||||||||||||||
| Distribution to redeemable noncontrolling interest holder | — | — | — | — | — | — | — | — | ( | ||||||||||||||||||||||||||||||||||||||||||||
| Adjustment of redeemable noncontrolling interest | — | — | ( | — | — | — | — | ( | |||||||||||||||||||||||||||||||||||||||||||||
| Treasury stock activity | — | — | — | — | — | ( | ( | ( | — | ||||||||||||||||||||||||||||||||||||||||||||
| Balances, December 31, 2025 | $ | $ | $ | ( | $ | ( | ( | $ | ( | $ | $ | ||||||||||||||||||||||||||||||||||||||||||
The accompanying notes are an integral part of these Consolidated Financial Statements.
61
| Year Ended December 31, | |||||||||||||||||
| 2025 | 2024 | 2023 | |||||||||||||||
| Cash flows from operating activities: | |||||||||||||||||
| Net (loss) income | $ | ( | $ | ( | $ | ||||||||||||
| Adjustments to reconcile net (loss) income to net cash from operating activities: | |||||||||||||||||
| Depreciation | |||||||||||||||||
| Amortization of purchased intangible assets | |||||||||||||||||
| Amortization of deferred debt issuance costs | |||||||||||||||||
| Stock-based compensation | |||||||||||||||||
| Bad debt expense | |||||||||||||||||
| Deferred income taxes | |||||||||||||||||
| Asset impairments | |||||||||||||||||
| Goodwill impairment | |||||||||||||||||
| Unrealized gain on marketable securities | ( | ||||||||||||||||
| Other | ( | ( | |||||||||||||||
| Change in: | |||||||||||||||||
| Accounts receivable, net | ( | ( | |||||||||||||||
| Inventories | ( | ||||||||||||||||
| Prepaid expenses and other | |||||||||||||||||
| Accounts payable | ( | ||||||||||||||||
| Contract liabilities | ( | ( | |||||||||||||||
| Accrued expenses and other liabilities | ( | ( | |||||||||||||||
| Net cash provided by operating activities | |||||||||||||||||
| Cash flows from investing activities: | |||||||||||||||||
| Investment in marketable securities | ( | ||||||||||||||||
| Proceeds from maturities of marketable securities | |||||||||||||||||
| Proceeds from sales of marketable securities | |||||||||||||||||
| Acquisition of property, plant and equipment | ( | ( | ( | ||||||||||||||
| Proceeds from property, plant and equipment reimbursements | |||||||||||||||||
| Proceeds on sale of property, plant and equipment | |||||||||||||||||
Proceeds from settlement of note receivable | |||||||||||||||||
| Net cash used in investing activities | ( | ( | ( | ||||||||||||||
| Cash flows from financing activities: | |||||||||||||||||
| Borrowings on term loan | |||||||||||||||||
| Repayments on term loan | ( | ( | ( | ||||||||||||||
| Borrowings on revolving loans | |||||||||||||||||
| Repayments on revolving loans | ( | ( | |||||||||||||||
| Payments of debt issuance costs | ( | ( | |||||||||||||||
| Distributions to redeemable noncontrolling interest holder | ( | ( | ( | ||||||||||||||
| Payment of deemed dividend to noncontrolling interest holder | ( | ||||||||||||||||
| Net proceeds from issuance of common stock to employees | |||||||||||||||||
| Treasury stock purchases | ( | ( | ( | ||||||||||||||
| Net cash used in financing activities | ( | ( | ( | ||||||||||||||
| Effects of exchange rates on cash | ( | ||||||||||||||||
| Net increase (decrease) in cash and cash equivalents | ( | ||||||||||||||||
| Cash and cash equivalents, beginning of the period | |||||||||||||||||
| Cash and cash equivalents, end of the period | $ | $ | $ | ||||||||||||||
The accompanying notes are an integral part of these Consolidated Financial Statements.
62
DMC GLOBAL INC.
CONSOLIDATED STATEMENTS OF CASH FLOWS (CONTINUED)
(Amounts in Thousands)
| Year Ended December 31, | |||||||||||||||||
| 2025 | 2024 | 2023 | |||||||||||||||
| Supplemental cash flow information: | |||||||||||||||||
| Non-cash lease liabilities arising from obtaining right-of-use assets | $ | $ | $ | ||||||||||||||
Cash paid during the period for: | |||||||||||||||||
Interest | $ | $ | $ | ||||||||||||||
| Income taxes, net | $ | $ | $ | ||||||||||||||
The accompanying notes are an integral part of these Consolidated Financial Statements.
63
DMC GLOBAL INC.
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
DECEMBER 31, 2025
(Amounts in Thousands, Except Share and Per Share Data)
1. ORGANIZATION AND BUSINESS
DMC Global Inc. (“DMC”, “we”, “us”, “our”, or the “Company”) was incorporated in Colorado in 1971 and reincorporated in Delaware in 1997. DMC is headquartered in Broomfield, Colorado and operates manufacturing facilities in the United States and Germany. DMC operates three manufacturing businesses: Arcadia Products, DynaEnergetics, and NobelClad, which provide differentiated products and engineered solutions primarily for the construction, energy, and industrial processing markets. Arcadia Products designs, engineers, fabricates and finishes aluminum framing systems, windows, curtain walls, storefronts, entrance systems, and interior partitions for the commercial construction market. Arcadia Products also supplies customized windows and doors to the high-end residential construction market. DMC acquired a 60 % controlling interest in Arcadia Products in December 2021. DynaEnergetics is a vertically integrated, global manufacturer of advanced perforating systems used in oil and gas well completion and well plug-and-abandonment operations. DynaEnergetics designs, engineers, manufactures, and qualifies its perforating components and systems in-house. NobelClad produces explosion-welded clad metal plates for use in the construction of corrosion-resistant industrial processing equipment. NobelClad also produces specialized transition joints for a broad range of applications, including aluminum smelting, ship construction, and LNG processing equipment. DMC’s common stock trades on Nasdaq under the symbol “BOOM.”
2. SIGNIFICANT ACCOUNTING POLICIES
Principles of Consolidation
The Company’s consolidated financial statements (“Consolidated Financial Statements”) include the accounts of DMC and its controlled subsidiaries. All intercompany accounts, profits, and transactions have been eliminated in consolidation.
Use of Estimates
The preparation of financial statements in conformity with accounting principles generally accepted in the United States (“U.S. GAAP”) requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the financial statements and the reported amounts of revenues and expenses during the reporting period. Actual results could differ from these estimates.
Business Combination
The results of a business acquired in a business combination are included in the Company’s financial statements from the date of acquisition. Acquisition-related transaction costs are expensed in the period in which the costs are incurred. The Company allocates purchase price to the identifiable assets and liabilities of the acquired business at their acquisition date fair values. The excess of the purchase price over the amount allocated to the identifiable assets and liabilities, if any, is recorded as goodwill.
Determining the fair value of assets acquired and liabilities assumed requires management to make significant judgments and estimates, including the selection of valuation methodologies, estimates of future revenue and cash flows, discount rates and selection of comparable companies.
Foreign Operations and Foreign Exchange Rate Risk
The functional currency of our foreign operations is the applicable local currency for each affiliate company. Assets and liabilities of foreign subsidiaries for which the functional currency is the local currency are translated at exchange rates in effect at period-end, and the Statements of Operations are translated at the average exchange rates during the period. Exchange rate fluctuations on translating foreign currency financial statements into U.S. dollars are referred to as translation adjustments. Translation adjustments are recorded as a separate component of stockholders’ equity and are included in “Other cumulative comprehensive loss.” Transactions denominated in currencies other than the functional currency are recorded based on exchange rates at the time such transactions arise. Subsequent changes in exchange rates result in transaction gains and losses, which are reflected in “Other expense, net” as unrealized, based on period-end exchange rates, or realized, upon settlement of the transaction. Cash flows from our operations in foreign countries are translated at actual exchange rates when known, or at the average rate for the period. As a result, amounts related to assets and liabilities reported in the Consolidated Statements of
64
Cash Flows will not agree to changes in the corresponding balances in the Consolidated Balance Sheets. The effects of exchange rate changes on cash balances held in foreign currencies are reported as a separate line item below cash flows from financing activities.
Cash and Cash Equivalents
For purposes of the Consolidated Financial Statements, we consider highly liquid investments purchased with an original maturity of three months or less to be cash equivalents.
Marketable Securities
In periods where we hold excess cash and cash equivalents, we invest in highly rated securities, with the primary objectives of preserving principal, providing access to liquidity to fund the ongoing operations and strategic needs of the Company and its subsidiaries, and achieving a yield that is commensurate with low risk and highly liquid securities. The Company’s investment policy generally limits the amount of credit exposure to any one issuer.
Accounts Receivable
The Company measures expected credit losses for its accounts receivable using a current expected credit loss model, which is based on historical experience, adjusted for current conditions and reasonable and supportable forecasts. The Company has disaggregated pools of accounts receivable balances by business, geography and/or customer risk profile and has used history and other experience to establish an allowance for credit losses at the time the receivable is recognized. To measure expected credit losses, we have elected to pool trade receivables by segment and analyze each segment’s accounts receivable balances as separate populations. Within each segment, receivables exhibit similar risk characteristics.
The following table summarizes current year activity in the allowance for credit losses on receivables from customers in each of our business segments:
Arcadia Products | DynaEnergetics | NobelClad | DMC Global Inc. | ||||||||||||||||||||
Allowance for doubtful accounts, December 31, 2024 | $ | $ | $ | $ | |||||||||||||||||||
| Current period provision for expected credit losses | |||||||||||||||||||||||
| Write-offs charged against the allowance | ( | ( | ( | ||||||||||||||||||||
| Recoveries of amounts previously reserved | ( | ( | ( | ||||||||||||||||||||
| Impacts of foreign currency exchange rates and other | |||||||||||||||||||||||
Allowance for doubtful accounts, December 31, 2025 | $ | $ | $ | $ | |||||||||||||||||||
Property, Plant and Equipment
65
computed using the straight-line method over the estimated useful life of the related asset (except leasehold improvements which are depreciated over the shorter of their estimated useful life or the lease term) as follows:
| Buildings and improvements | |||||
| Manufacturing equipment and tooling | |||||
| Furniture, fixtures, and computer software and equipment | |||||
| Other | |||||
Gross property, plant and equipment consisted of the following at December 31:
| 2025 | 2024 | ||||||||||
| Land | $ | $ | |||||||||
| Buildings and improvements | |||||||||||
| Manufacturing equipment and tooling | |||||||||||
| Furniture, fixtures, and computer software and equipment | |||||||||||
| Other | |||||||||||
| Construction in process | |||||||||||
| Total gross property, plant and equipment | $ | $ | |||||||||
Contract Liabilities
| 2025 | 2024 | ||||||||||
Arcadia Products | $ | $ | |||||||||
| DynaEnergetics | |||||||||||
| NobelClad | |||||||||||
| Total | $ | $ | |||||||||
We generally expect to recognize the revenue associated with contract liabilities over a time period no longer than one year, but unforeseen circumstances can cause delays in shipments associated with contract liabilities, primarily supply chain delays and disruptions.
Redeemable Noncontrolling Interest
On December 23, 2021, DMC completed the acquisition of 60 % of the membership interests in Arcadia Products, LLC, a Colorado limited liability company resulting from the conversion of Arcadia, Inc. (collectively, “Arcadia Products”). The limited liability company operating agreement for Arcadia Products (the “Operating Agreement”) contains a right for the Company to purchase the remaining interest in Arcadia Products from the minority interest holder on or after December 23, 2024 (“Call Option”). Similarly, the Operating Agreement originally permitted the minority interest holder of Arcadia Products the right to sell its remaining interest in Arcadia Products to the Company on or after December 23, 2024 (“Put Option”). On December 3, 2024, the Company and minority interest holder entered into an amendment to the Operating Agreement whereby the minority interest holder agreed not to exercise the Put Option until on or after September 6, 2026, in exchange for, among other terms, a one-time payment of $2,500 .
The purchase price for any interests sold pursuant to the Call Option or Put Option continues to be based upon a predefined calculation as included within the Operating Agreement. In connection with an exercise of the Call Option, the Operating Agreement would require payment of the purchase price in cash. However, in connection with the exercise of the Put Option, the Operating Agreement permits the Company the option to pay the purchase price in either cash, or 20 % in cash and 80 % in shares of a newly designated series of preferred stock (the “Put Preferred”) that would be authorized at that time. The terms of the Put Preferred, including the rights, powers and preferences thereof, are set forth in the Operating Agreement. The number of shares to be issued in connection with the Put Option (if the Company utilizes that payment mechanism) would be initially determined and valued at the volume weighted average trading price of the Company’s common stock over the 60 days
66
preceding the delivery of the Put Option notice. The Put Preferred would be entitled to dividends at a rate of 3 % per annum and would be convertible into one share of the Company’s common stock, subject to Nasdaq rules which generally prohibit private placements of equity securities with voting rights of 20% or more of a company’s pre-issuance voting power, including through convertible securities, without stockholder approval; the holder of the Put Preferred would not be allowed to participate in any such stockholder vote. The Company may redeem the Put Preferred at any time; however, beginning on June 23, 2027, the Company must begin proportionate annual redemptions of the Put Preferred and, in any event, the Put Preferred must be redeemed by the third anniversary of its issuance.
The Company initially accounted for the noncontrolling interest in Arcadia Products at its acquisition date fair value. We determined that neither the Call Option nor the Put Option meet the definition of a derivative as the Operating Agreement does not allow for contractual net settlement, the options cannot be settled outside the Operating Agreement through a market mechanism, and the underlying shares are deemed illiquid as they are not publicly traded and thus not considered readily convertible to cash. Additionally, the settlement price for both options is based upon a predefined calculation tied to adjusted earnings rather than a fixed price, and the formula is based upon a multiple of Arcadia Products’ average adjusted earnings over a three-year period, subject to a floor value as defined in the Operating Agreement which is based primarily upon a contractually-stated equity value. As such, we have concluded that the Call Option and Put Option are embedded within the noncontrolling interest and therefore do not represent freestanding instruments.
Given that the noncontrolling interest is subject to possible redemption with redemption rights that are not entirely within the control of the Company, we have concluded that the noncontrolling interest should be accounted for in accordance with ASC 480 Distinguishing Liabilities from Equity (“ASC 480”). The noncontrolling interest is also probable of redemption, as the only criteria for the security to become redeemable is the passage of time. As such, the redeemable noncontrolling interest is classified in temporary equity, separate from the stockholders’ equity section, in the Consolidated Balance Sheets.
At each balance sheet date subsequent to acquisition, two separate calculations must be performed to determine the value of the redeemable noncontrolling interest. First, the redeemable noncontrolling interest must be accounted for in accordance with ASC 810 Consolidation (“ASC 810”) whereby income (loss) and cash distributions attributable to the redeemable noncontrolling interest holder are ascribed. After this occurs, applicable provisions of ASC 480 must be considered to determine whether any further adjustment is necessary to increase the carrying value of the redeemable noncontrolling interest. An adjustment would only be necessary if the estimated settlement amount of the redeemable noncontrolling interest, per the terms of the Operating Agreement, exceeds the carrying value calculated in accordance with ASC 810. If such adjustment is required, the impact is immediately recorded to retained earnings and additional paid-in capital, upon absence of retained earnings, and therefore does not impact the Consolidated Statements of Operations or Comprehensive (Loss) Income. As of December 31, 2025, and 2024, the redeemable noncontrolling interest was $187,080
Promissory Note
In order to equalize after-tax consideration to the redeemable noncontrolling interest holder relative to an alternative transaction structure, immediately following the closing of the acquisition, the Company loaned $24,902 to the redeemable noncontrolling interest holder. The loan was evidenced by an unsecured promissory note, and the loan will be repaid out of proceeds from the sale of the redeemable noncontrolling interest holder’s interests in Arcadia Products, whether received upon exercise of the Put Option, the Call Option or upon sale to third parties permitted under the terms of the Operating Agreement. The loan must be repaid in full at the earlier of the exercise of the Put or Call Option, or by December 16, 2051, and has been recorded within “Other assets” in the Consolidated Balance Sheets.
Revenue Recognition
The Company’s revenues are derived from consideration paid by customers for tangible goods. The Company analyzes its different products by segment to determine the appropriate basis for revenue recognition. Revenue is not generated from sources other than contracts with customers and revenue is recognized net of any taxes collected from customers, which are subsequently remitted to governmental authorities. There are no material upfront costs for operations that are incurred from contracts with customers.
Our rights to payments for goods transferred to customers within our DynaEnergetics and NobelClad business segments arise when control is transferred at a point in time and not on any other criteria. Our rights to payments for goods transferred to customers within our Arcadia Products business segment also predominantly arise when control is transferred at a point in time; however, at times, control of certain customized, project-based products passes to the customer over time. Payment terms and conditions vary by contract, although terms generally include a requirement of payment within 30 to 90 days across all of our
67
segments. In instances when we require customers to make advanced payments prior to the shipment of their orders, we record a contract liability. We have determined that our contract liabilities do not include a significant financing component given the shorter duration between order initiation and order fulfillment within each of our segments. Refer to Note 11 “Business Segments” for disaggregated revenue disclosures.
Arcadia Products
Customers agree to terms and conditions at the time of initiating an order. A significant portion of transactions contain standard architectural building materials that are not made-to-order, which include standard storefronts and entrance systems, windows, curtain walls, and interior partitions. In instances where multiple products are included within an order, each product represents a separate performance obligation given that: (1) the customer can benefit from each product on a standalone basis and (2) each product is distinct within the context of the contract.
The transaction price is readily determinable and fixed at the time the transaction is entered into with the customer. Arcadia Products is entitled to each product’s transaction price upon the customer obtaining control of the item. For standard architectural building materials that are not made-to-order, such control transfers at a point in time, which is generally when the product has been shipped to the customer and the legal title has been transferred. Upon shipment and title transfer, Arcadia Products has performed its contractual requirements such that it has a present right to payment, and the customer from that point forward bears all risks and rewards of ownership. In addition, at this date, the customer has the ability to direct the use of, or restrict access to, the asset. Payment discounts, rebates, refunds, or any other forms of variable consideration are typically not granted to Arcadia Products’ customers.
For contracts that contain only one performance obligation, the total transaction price is allocated to the sole performance obligation. For contracts which contain multiple distinct performance obligations, judgment is required to determine the standalone selling price (“SSP”) for each performance obligation. However, such judgment is largely mitigated given that standard architectural building materials purchased are generally shipped at the same time. In instances where products purchased are not shipped at the same time, Arcadia Products uses the contractually stated price to determine SSP as each performance obligation’s price has been approved by the customer and approximates the price sold separately.
At times, Arcadia Products will also contract with customers to supply customized architectural building materials based on design specifications, measurements, finishes, framing materials, and other options selected by the customer at the time an order is initiated. For these contracts, which are significantly less frequent in both volume and financial statement magnitude, Arcadia Products has an enforceable right to payment from its customers at the time an order is received and accepted for all manufacturing efforts expended on behalf of its customers. Due to the customized nature of these products, the Company has concluded that the substantial portion of the related goods produced have no alternative use, and therefore control of these products passes to the customer over time. We have concluded that recognizing revenue utilizing an over-time output method based upon units delivered reasonably depicts the fulfillment of our performance obligations under our contracts and the value received by the customer based upon our performance to date. This conclusion is further supported by the frequency of shipments in fulfilling these contracts. We have elected not to disclose our unsatisfied performance obligations as of December 31, 2025, under the short-term contract exemption as we expect such performance obligations will be satisfied within the next 12 months following the end of the reporting period.
Billings for customized architectural building materials occur at times upon delivery, but also can occur via pre-established billing schedules agreed upon at the commencement of the contract. Therefore, we at times generate contract liabilities in instances when we have billed the customer in excess of revenue recognized for units delivered.
DynaEnergetics
Customers agree to terms and conditions at the time of initiating an order. Transactions contain standard products, which may include perforating system components, such as detonating cord, or systems and associated hardware, including Factory-Assembled, Performance-AssuredTM DynaStage® (“DS”) perforating systems. In instances where multiple products are included within an order, each product represents a separate performance obligation given that: (1) the customer can benefit from each product on a standalone basis and (2) each product is distinct within the context of the contract. However, judgment is mitigated given that products purchased are generally shipped at the same time.
The transaction price is readily determinable and fixed at the time the transaction is entered into with the customer. DynaEnergetics is entitled to each product’s transaction price upon the customer obtaining control of the item. Such control occurs as of a point in time, which is generally based upon relevant International Commercial Terms (“Incoterms”) as it relates to product ownership and legal title being transferred. Upon fulfillment of applicable Incoterms, DynaEnergetics has performed
68
its contractual requirements such that it has a present right to payment, and the customer from that point forward bears all risks and rewards of ownership. In addition, at this date, the customer has the ability to direct the use of, or restrict access to, the asset. No payment discounts, rebates, refunds, or any other forms of variable consideration are included within contracts. DynaEnergetics also does not provide service-type warranties either via written agreement or customary business practice, nor does it allow customer returns without its prior approval.
NobelClad
Customers agree to terms and conditions at the time of initiating an order. The significant majority of transactions contain a single performance obligation - the delivery of a clad metal product. In instances where multiple products are included within an order, each product represents a separate performance obligation given that: (1) the customer can benefit from each product on a standalone basis and (2) each product is distinct within the context of the contract. However, judgment is mitigated given that products purchased are generally shipped at the same time.
The transaction price is readily determinable and fixed at the time the transaction is entered into with the customer. NobelClad is entitled to each product’s transaction price upon the customer obtaining control of the item. Such control occurs as of a point in time, which is generally based upon relevant Incoterms as it relates to product ownership and legal title being transferred. Upon fulfillment of applicable Incoterms, NobelClad has performed its contractual requirements such that it has a present right to payment, and the customer from that point forward bears all risks and rewards of ownership. In addition, at this date, the customer has the ability to direct the use of, or restrict access to, the asset. No payment discounts, rebates, refunds, or any other forms of variable consideration are included within NobelClad contracts. NobelClad also does not provide service-type warranties either via written agreement or customary business practice, nor does it allow customer returns.
Research and Development
Income Taxes
We recognize deferred tax assets and liabilities for the expected future income tax consequences of temporary differences between the financial reporting and tax bases of assets and liabilities. Any effects of changes in income tax rates or tax laws are included in the provision for income taxes in the period of enactment. The deferred income tax impact of tax credits are recognized as an immediate adjustment to income tax expense. We recognize deferred tax assets for the expected future effects of all deductible temporary differences to the extent we believe these assets will more likely than not be realized. We record a valuation allowance when, based on current circumstances, it is more likely than not that all or a portion of the deferred tax assets will not be realized. In making such determination, we consider all available positive and negative evidence, including future reversals of existing taxable temporary differences, projected future taxable income, tax planning strategies, recent financial performance and existing valuation allowances, if any.
We recognize the tax benefits from uncertain tax positions only when it is more likely than not, based on the technical merits of the position, that the tax position will be sustained upon examination, including the resolution of any related appeals or litigation. The tax benefits recognized in the Consolidated Financial Statements from such a position are measured as the largest benefit that is more likely than not to be realized upon ultimate resolution. We recognize interest and penalties related to uncertain tax positions in operating expense.
Arcadia Products is treated as a partnership for U.S. tax purposes. With the exception of certain state taxes, income or loss flows through to the shareholders and is taxed at the shareholder level. Tax impacts related to income or loss from Arcadia Products that are included in consolidated pretax results but are attributable to the redeemable noncontrolling interest holder are not included in the consolidated income tax provision.
Refer to Note 10 “Income Taxes” for further information.
Earnings Per Share
In periods with net income, the Company computes earnings per share (“EPS”) using a two-class method, which is an earnings allocation formula that determines EPS for (i) each class of common stock (the Company has a single class of common stock), and (ii) participating securities according to dividends declared and participation rights in undistributed earnings.
69
Restricted stock awards (“RSAs”) granted under the 2016 Omnibus Incentive Plan are considered participating securities in periods of net income as they receive non-forfeitable rights to dividends as common stock. RSAs do not participate in net losses. RSAs granted under the 2025 Omnibus Incentive Plan are non-participating securities as they do not receive non-forfeitable rights to dividends as common stock.
Basic EPS is calculated by dividing net income (loss) attributable to the Company’s stockholders after adjustment of redeemable noncontrolling interest and dividends, if applicable, by the weighted average number of common shares outstanding during the period. Net income (loss) available to common shareholders of the Company includes any adjustment to the redeemable noncontrolling interest as of the end of the period presented. Refer to the “Redeemable Noncontrolling Interest” section above for further discussion of the calculation of the adjustment of the redeemable noncontrolling interest. Diluted EPS adjusts basic EPS for the effects of RSAs, restricted stock units, performance share units and other potentially dilutive financial instruments (“dilutive securities”), only in the periods in which such effect is dilutive. The effect of the dilutive securities is reflected in diluted EPS by application of the more dilutive of (1) the treasury stock method or (2) the two-class method. For the applicable periods presented, diluted EPS using the two-class method was more dilutive than the treasury stock method; as such, only the two-class method has been included below.
EPS was calculated as follows for the years ended December 31:
| 2025 | 2024 | 2023 | |||||||||||||||
| Net (loss) income attributable to DMC Global Inc. stockholders, as reported | $ | ( | $ | ( | $ | ||||||||||||
| Adjustment of redeemable noncontrolling interest | ( | ( | ( | ||||||||||||||
| Less: Deemed dividend | ( | ||||||||||||||||
| Less: Undistributed net income available to participating securities | ( | ||||||||||||||||
| Numerator for basic net (loss) income per share: | ( | ( | |||||||||||||||
| Add: Undistributed net income allocated to participating securities | |||||||||||||||||
| Less: Undistributed net income reallocated to participating securities | ( | ||||||||||||||||
| Numerator for diluted net (loss) income per share: | ( | ( | |||||||||||||||
| Denominator: | |||||||||||||||||
| Weighted average shares outstanding for basic net (loss) income per share | |||||||||||||||||
Effect of dilutive securities (1) | |||||||||||||||||
| Weighted average shares outstanding for diluted net (loss) income per share | |||||||||||||||||
| Net (loss) income per share: | |||||||||||||||||
| Basic | $ | ( | $ | ( | $ | ||||||||||||
| Diluted | $ | ( | $ | ( | $ | ||||||||||||
(1) Given that we were in a net loss position for the years ended December 31, 2025, and 2024, all potentially dilutive shares were anti-dilutive and were therefore excluded from the determination of diluted EPS. For the year ended December 31, 2023, 7,387 shares were excluded as their effect would have been anti-dilutive.
Fair Value of Financial Instruments
Fair value is defined as the price that would be received to sell an asset or paid to transfer a liability in an orderly transaction between market participants at the measurement date. We are required to use an established hierarchy for fair value measurements based upon the inputs to the valuation and the degree to which they are observable or not observable in the market. The three levels in the hierarchy are as follows:
•Level 1 — Inputs to the valuation based upon quoted prices (unadjusted) for identical assets or liabilities in active markets that are accessible as of the measurement date.
•Level 2 — Inputs to the valuation include quoted prices in either markets that are not active, or in active markets for similar assets or liabilities, inputs other than quoted prices that are observable, and inputs that are derived principally from or corroborated by observable market data.
•Level 3 — Inputs to the valuation that are unobservable inputs for the asset or liability.
70
The highest priority is assigned to Level 1 inputs and the lowest priority to Level 3 inputs.
The carrying value of cash and cash equivalents, accounts receivable, accounts payable, and accrued expenses approximate their fair value. The carrying value of our revolving loans and term loan under our credit facility, as well as the European line of credit, when outstanding, also approximate their fair value because of the variable interest rate associated with these instruments, which reset each month at market interest rates. All of these account balances are considered Level 1 assets and liabilities.
We did not have any Level 3 assets or liabilities recorded as of December 31, 2025, and 2024.
Restructuring Expenses and Asset Impairments
Finite-lived assets are tested for impairment whenever events or changes in circumstances indicate that their carrying value may not be recoverable. We compare the expected undiscounted future operating cash flows associated with applicable assets or asset groupings to their respective carrying values to determine if they are fully recoverable when indicators of impairment are present. If the expected future operating cash flows of an asset or asset grouping are not sufficient to recover the related carrying value, we estimate the fair value of the asset or asset grouping. Impairment is recognized when the carrying amount of the asset or asset grouping is not recoverable and when carrying value exceeds the estimated fair value. Long-lived assets to be disposed of, if any, are reported at the lower of carrying amount or fair value less cost to sell.
For the year ended December 31, 2025, we recorded asset impairments of $1,081 primarily related to a $785 impairment charge associated with a decision to discontinue an internal website and related automation platform. For the year ended December 31, 2024, we recorded asset impairments of $1,182 primarily related to the abandonment of a planned manufacturing expansion at DynaEnergetics. For the year ended December 31, 2023, we recorded asset impairments of $2,471 primarily related to a $1,871 impairment charge associated with the abandonment of a software asset at DynaEnergetics.
71
Total restructuring charges incurred and asset impairments recorded are as follows and were reported in the “Restructuring expenses and asset impairments” line item in our Consolidated Statements of Operations for the year ended December 31:
| 2025 | |||||||||||||||||||||||||||||||||||
| Severance | Asset Impairment | Contract Termination Costs | Total | ||||||||||||||||||||||||||||||||
| Arcadia Products | $ | $ | $ | $ | |||||||||||||||||||||||||||||||
| DynaEnergetics | |||||||||||||||||||||||||||||||||||
| NobelClad | |||||||||||||||||||||||||||||||||||
| Corporate | |||||||||||||||||||||||||||||||||||
| Total | $ | $ | $ | $ | |||||||||||||||||||||||||||||||
| 2024 | |||||||||||||||||||||||||||||||||||
| Severance | Asset Impairment | Total | |||||||||||||||||||||||||||||||||
| Arcadia Products | $ | $ | $ | ||||||||||||||||||||||||||||||||
| DynaEnergetics | |||||||||||||||||||||||||||||||||||
| Total | $ | $ | $ | ||||||||||||||||||||||||||||||||
| 2023 | |||||||||||||||||||||||||||||||||||
| Severance | Asset Impairment | Contract Termination Costs | Equipment Moving and Other Exit Costs | Stock-based compensation | Total | ||||||||||||||||||||||||||||||
| DynaEnergetics | $ | $ | $ | $ | $ | $ | |||||||||||||||||||||||||||||
| NobelClad | |||||||||||||||||||||||||||||||||||
| Corporate | |||||||||||||||||||||||||||||||||||
| Total | $ | $ | $ | $ | $ | $ | |||||||||||||||||||||||||||||
Proceeds from Property, Plant and Equipment Reimbursements
Commencing in calendar year 2024, the Company has incurred significant costs associated with a mine expansion project at its NobelClad facility in Mount Braddock, Pennsylvania. During the years ended December 31, 2025, and 2024, we received $5,725 and $993 , respectively, in cash reimbursements from a U.S. Navy assistance program. Capital-related reimbursements are recorded as a reduction to property, plant, and equipment in the Consolidated Balance Sheets and therefore result in a reduction to depreciation expense over the useful life of the corresponding asset within the Consolidated Statements of Operations. Reimbursements are classified as investing activities in the Consolidated Statements of Cash Flows.
Concentration of Credit Risk and Off-Balance Sheet Arrangements
Financial instruments, which potentially subject us to a concentration of credit risk, consist primarily of cash, cash equivalents, and accounts receivable. Generally, we do not require collateral to secure receivables. At December 31, 2025, we had no financial instruments with off-balance sheet risk of accounting losses.
Other Cumulative Comprehensive Loss
For all periods presented, other cumulative comprehensive loss consisted entirely of currency translation adjustments.
Recent Accounting Pronouncements
In December 2023, the Financial Accounting Standards Board (“FASB”) issued Accounting Standards Update (“ASU”) No. 2023-09, Income Taxes (Topic 740): Improvement to Income Tax Disclosures (“ASU 2023-09”), which amends income tax disclosure requirements for the effective tax rate reconciliation to include incremental income tax information and expanded disclosures of income taxes paid. We adopted ASU 2023-09 for the year ended December 31, 2025 on a prospective basis. Refer to Note 10 “Income Taxes” for additional information.
72
In November 2024, the FASB issued ASU No. 2024-03, Income Statement - Reporting Comprehensive Income - Expense Disaggregation Disclosures (Subtopic 220-40): Disaggregation of Income Statement Expenses (“ASU 2024-03”). ASU 2024-03 requires public business entities to disclose more detailed information about the types of expense in commonly presented expense captions to provide investors with more transparent and detailed expense information. The guidance is effective for fiscal years beginning after December 15, 2026 on a prospective basis. Early adoption and retrospective application of the amendments are permitted. The Company is within the scope of this ASU and expects to adopt ASU 2024-03 on January 1, 2027, with adoption resulting in new disclosures as prescribed by the guidance.
We have considered all other recent accounting pronouncements issued, but not yet effective, and we do not expect any to have a material effect on the Company’s Consolidated Financial Statements.
3. INVENTORIES
Inventories are stated at the lower of cost (first-in, first-out) or net realizable value. Significant cost elements included in inventory are raw materials, labor, freight, subcontract costs, and manufacturing overhead. As necessary, we write down inventory to its net realizable value by recording provisions for excess, slow moving and obsolete inventory. To determine provision amounts, we regularly review inventory quantities on hand and values, and compare them to estimates of future product demand, market conditions, production requirements and technological developments.
Inventories consisted of the following as of December 31, 2025:
Arcadia Products | DynaEnergetics | NobelClad | DMC Global Inc. | ||||||||||||||||||||
| Raw materials | $ | $ | $ | $ | |||||||||||||||||||
| Work-in-process | |||||||||||||||||||||||
| Finished goods | |||||||||||||||||||||||
| Supplies | |||||||||||||||||||||||
| Total inventories | $ | $ | $ | $ | |||||||||||||||||||
Inventories consisted of the following as of December 31, 2024:
Arcadia Products | DynaEnergetics | NobelClad | DMC Global Inc. | ||||||||||||||||||||
| Raw materials | $ | $ | $ | $ | |||||||||||||||||||
| Work-in-process | |||||||||||||||||||||||
| Finished goods | |||||||||||||||||||||||
| Supplies | |||||||||||||||||||||||
| Total inventories | $ | $ | $ | $ | |||||||||||||||||||
4. PURCHASED INTANGIBLE ASSETS
Our purchased intangible assets include finite-lived customer relationships and trademarks/trade names. Customer relationships are amortized using an accelerated amortization method over the estimated useful life. Trademarks/trade names are amortized ratably over the estimated useful life.
The remaining weighted average amortization periods for unamortized purchased intangible assets are as follows as of December 31, 2025:
| Customer relationships | |||||
| Trademarks / Trade names | |||||
73
Our purchased intangible assets consisted of the following as of December 31, 2025:
| Gross | Accumulated Amortization | Net | |||||||||||||||
| Customer relationships | $ | $ | ( | $ | |||||||||||||
| Trademarks / Trade names | ( | ||||||||||||||||
| Total intangible assets | $ | $ | ( | $ | |||||||||||||
Our purchased intangible assets consisted of the following as of December 31, 2024:
| Gross | Accumulated Amortization | Net | |||||||||||||||
| Core technology | $ | $ | ( | $ | |||||||||||||
| Customer relationships | ( | ||||||||||||||||
| Trademarks / Trade names | ( | ||||||||||||||||
| Total intangible assets | $ | $ | ( | $ | |||||||||||||
Expected future amortization of purchased intangible assets is as follows:
| For the years ended December 31: | |||||
| 2026 | $ | ||||
| 2027 | |||||
| 2028 | |||||
| 2029 | |||||
| 2030 | |||||
| Thereafter | |||||
| $ | |||||
5. GOODWILL
Goodwill represents the amount by which the purchase price exceeds the fair value of identifiable tangible and intangible assets and liabilities acquired in a business combination and is not amortized, but tested annually for impairment, or more frequently, if events or changes in circumstances indicate that the carrying value might not be fully recoverable. In 2024, the Company identified potential triggering events for its Arcadia Products reporting unit and concluded it was more likely than not that the fair value of the reporting unit was below its carrying value. As such, a quantitative impairment test was performed and resulted in a $141,725 impairment charge, which is included in “Goodwill impairment” in our Consolidated Statements of Operations for the year ended December 31, 2024.
6. LEASES
The Company leases real properties for use in manufacturing and as administrative and sales offices, and leases automobiles and office equipment. The Company determines if a contract contains a lease arrangement at the inception of the contract. For leases in which the Company is the lessee, leases are classified as either finance or operating. Right-of-use (“ROU”) assets are initially measured at the present value of lease payments over the lease term plus initial direct costs, if any. If a lease does not provide a discount rate and the implicit rate cannot be readily determined, an incremental borrowing rate is used to determine the present value of future lease payments. Lease expense for minimum lease payments is recognized on a straight-line basis over the lease term within the Consolidated Statements of Operations. Lease and non-lease components within the Company’s lease agreements are accounted for together. Variable lease payments are recognized in the period in which the obligation is incurred.
74
Nearly all of the Company’s leasing arrangements are classified as operating leases. ROU asset and lease liability balances were as follows for the periods presented:
| December 31, 2025 | December 31, 2024 | ||||||||||
| ROU asset | $ | $ | |||||||||
| Current lease liability | |||||||||||
| Long-term lease liability | |||||||||||
| Total lease liability | $ | $ | |||||||||
The ROU asset is reported in “” while the current lease liability is reported in “”, and the long-term lease liability is reported in “” in the Company’s Consolidated Balance Sheets. Cash paid for operating lease liabilities is recorded as operating cash outflows in the Company’s Consolidated Statements of Cash Flows.
Arcadia Products leases certain office, manufacturing, distribution and warehouse facilities from entities affiliated with the redeemable noncontrolling interest holder and president of Arcadia Products. There were eight such leases in effect as of December 31, 2025, with expiration dates ranging from calendar years 2027 to 2031, inclusive of the assumed exercise of applicable renewal options. As of December 31, 2025, the total ROU asset and related lease liability recognized for these leases was $18,932 and $20,127 , respectively. During the years ended December 31, 2025, and 2024, associated lease expense was $4,666 and $4,625 , respectively, and is included in total operating lease expense.
Total operating lease expense included in the Company’s Consolidated Statements of Operations was $13,099 , $13,678 , and $12,822 for the years ended December 31, 2025, 2024, and 2023, respectively. Short term and variable lease costs were not significant for any period presented.
Certain of the Company’s leases contain renewal options and options to extend the lease term for up to ten years , and a majority of these options are reflected in the calculation of the ROU assets and related lease liability due to the likelihood of renewal.
The following table summarizes the weighted average lease terms and discount rates for operating lease liabilities:
| December 31, 2025 | December 31, 2024 | ||||||||||
Weighted average remaining lease term | |||||||||||
Weighted average discount rate | % | % | |||||||||
The following table represents maturities of operating lease liabilities as of December 31, 2025:
| 2026 | $ | ||||||||||
| 2027 | |||||||||||
| 2028 | |||||||||||
| 2029 | |||||||||||
| 2030 | |||||||||||
| Thereafter | |||||||||||
| Total future minimum lease payments | |||||||||||
| Less imputed interest | ( | ||||||||||
| Total | $ | ||||||||||
75
7. DEBT
Outstanding borrowings consisted of the following at December 31:
| 2025 | 2024 | ||||||||||
| Syndicated credit agreement: | |||||||||||
| U.S. Dollar revolving loan | $ | $ | |||||||||
| Term loan | |||||||||||
European line of credit | |||||||||||
| Outstanding borrowings | |||||||||||
| Less: debt issuance costs | ( | ( | |||||||||
| Total debt | |||||||||||
| Less: current portion of long-term debt | ( | ( | |||||||||
| Long-term debt | $ | $ | |||||||||
Syndicated Credit Agreement
On February 6, 2024, the Company and certain domestic subsidiaries entered into an amendment (the “First Amendment”) to its existing credit agreement with a syndicate of banks, led by KeyBank National Association (the “credit facility”). The First Amendment provided for certain changes to the credit facility and increased the maximum commitment amount from $200,000 to $300,000 . The credit facility originally allowed for revolving loans of up to $200,000 , a $50,000 term loan facility, and a $50,000 delayed draw term loan (“DDTL”) facility. On February 6, 2026, the ability of the Company to access the $50,000 DDTL facility expired per the terms of the First Amendment. The $50,000 term loan facility is payable in installments of $625 per quarter through March 31, 2026. Quarterly term loan payments increase to $938 on June 30, 2026, through March 31, 2028, and increase to $1,250 from June 30, 2028, through December 31, 2028. A balloon payment for the outstanding term loan balance is due upon the credit facility maturity date of February 6, 2029. The credit facility retains a $100,000 accordion feature to increase the commitments under the revolving loan and/or by adding one or more term loans subject to approval by the applicable lenders. The credit facility is secured by certain assets of DMC including accounts receivable, inventory, and fixed assets, including Arcadia Products and its subsidiary, as well as guarantees and share pledges by DMC and its subsidiaries. The revolving loan can also be used to issue bank guarantees to customers to secure their advanced payments. As of December 31, 2025, and 2024, bank guarantees of $800 and $443 , respectively, were secured.
Borrowings under the $200,000 revolving loan limit and $50,000 term loan can be in the form of Adjusted Daily Simple Secured Overnight Financing Rate (“SOFR”) loans or one month Adjusted Term SOFR loans. Additionally, U.S. dollar borrowings on the revolving loan can be in the form of Base Rate loans (Base Rate borrowings are based on the greater of the administrative agent’s Prime rate, an adjusted Federal Funds rate or an adjusted SOFR rate). SOFR loans bear interest at the applicable SOFR rate plus an applicable margin (varying from 2.25 % to 3.25 %). Base Rate loans bear interest at the defined Base Rate plus an applicable margin (varying from 1.25 % to 2.25 %).
The credit facility includes various covenants and restrictions, certain of which relate to the payment of dividends or other distributions to stockholders; redemption of capital stock; incurring additional indebtedness; mortgaging, pledging or disposition of major assets; and maintenance of specified ratios.
The leverage ratio is defined in the credit facility as the ratio of Consolidated Funded Indebtedness (as defined in the credit facility) on the last day of any trailing four quarter period to Consolidated EBITDA (as defined in the credit facility) for such period. The maximum leverage ratio permitted by our credit facility is 3.0 to 1.0; provided, however, that the Second Amendment (as defined below) provides for a temporary increase in the maximum leverage ratio under certain circumstances as described below.
The debt service coverage ratio is defined in the credit facility as the ratio of Consolidated EBITDA less the sum of capital distributions paid in cash (other than those made with respect to preferred stock issued under the Operating Agreement), Consolidated Unfunded Capital Expenditures (as defined in the credit facility), and net cash income taxes divided by the sum of cash interest expense, any dividends on the preferred stock paid in cash, and scheduled principal payments on funded indebtedness. Under our credit facility, the minimum debt service coverage ratio permitted is 1.25 to 1.0.
On June 10, 2025, the Company and certain domestic subsidiaries entered into an amendment to the credit facility (the “Second Amendment”). The Second Amendment provided for certain changes to the credit facility, including modifications to
76
the Company’s financial covenants and applicable interest rates to assist with the possible acquisition of the remaining 40 % minority interest in Arcadia Products. Key provisions of the Second Amendment include a temporary increase in the Company’s maximum leverage ratio to 3.5 x adjusted EBITDA over the trailing 12 months — up from 3.0 x — should either the Put Option or the Call Option be exercised. This elevated leverage limit will apply for the first two quarters following payment of the purchase price of the Put Option or the Call Option, followed by a reduction to 3.25 x in the third quarter, and a return to 3.0 x thereafter.
European Line of Credit
We maintain a line of credit with a German bank with a borrowing capacity of €7,000 for our NobelClad and DynaEnergetics operations in Europe. This line of credit is also used to issue bank guarantees to customers to secure their advanced payments. As of December 31, 2025, and 2024, we had no 3,074 and €2,843 , respectively, were secured. The line of credit bears interest at a EURIBOR-based variable rate which at December 31, 2025, was 6.93 %. The line of credit has open-ended terms and can be canceled by the bank at any time.
8. STOCKHOLDERS’ EQUITY AND EMPLOYEE STOCK PLANS
Employee stock plans
Our stock-based compensation expense results from RSAs, restricted stock units (“RSUs”), and performance share units (“PSUs”). The following table sets forth the total stock-based compensation expense included in the Consolidated Statements of Operations for the years ended December 31:
| 2025 | 2024 | 2023 | ||||||||||||||||||
| Cost of products sold | $ | $ | $ | |||||||||||||||||
| General and administrative expenses | ||||||||||||||||||||
| Selling and distribution expenses | ||||||||||||||||||||
Strategic review and related expenses | ||||||||||||||||||||
| Restructuring expenses, net and asset impairments | ||||||||||||||||||||
| Stock-based compensation | ||||||||||||||||||||
| Income tax benefit | ( | ( | ( | |||||||||||||||||
| Stock-based compensation, net of income taxes | $ | $ | $ | |||||||||||||||||
| Earnings per share impact | ||||||||||||||||||||
| Basic | $ | $ | $ | |||||||||||||||||
| Diluted | $ | $ | $ | |||||||||||||||||
On May 14, 2025, our stockholders approved the 2025 Omnibus Incentive Plan (“2025 Plan”). The 2025 Plan provides for the granting of various types of equity-based incentives, including stock options, RSAs, RSUs, stock appreciation rights, performance shares, performance units, other stock-based awards, and cash-based awards. Our stockholders approved a total of 2,414,278 shares available for grant under the 2025 Plan, less 1,331,911 outstanding shares previously granted under the 2016 Omnibus Incentive Plan (“2016 Plan”) as of the 2016 Plan’s expiration on May 14, 2025. As of December 31, 2025, there were 557,942 shares available for future grant. In determining shares available for future grant, outstanding PSUs are assumed to vest at maximum attainment.
Restricted stock awards and restricted stock units. RSAs and RSUs are granted to employees and non-employee directors based on time-vesting. For RSAs or RSUs granted to employees, vesting typically occurs in one-third increments on the first, second, and third anniversary of the grant date. For RSAs or RSUs granted to non-employee directors, vesting occurs on the earlier of (i) the first anniversary of the grant date or (ii) the date of the next annual stockholder meeting, so long as that meeting is at least 50 weeks after the prior annual meeting. Under the 2016 Plan, each RSA granted represented a restricted share of common stock that has voting and dividend rights and becomes fully unrestricted upon vesting. Under the 2025 Plan, each RSA has similar rights as compared to the 2016 Plan, excluding dividend rights. Under both the 2016 Plan and 2025 Plan, each RSU granted includes the right to receive one share of common stock upon vesting.
77
The fair value of RSAs and RSUs granted to employees and non-employee directors was based on the fair value of the Company’s stock on the grant date, with the associated value being ratably recognized to compensation expense over the vesting period. Our policy is to recognize forfeitures of RSAs and RSUs as they occur.
Cash-settled RSUs. In 2025, the Company granted cash-settled RSUs to its Chief Executive Officer. The awards vest in one-third increments on the first, second, and third anniversary of the grant date, unless otherwise accelerated under certain provisions included within the award agreement. Given that these awards must be settled in cash, they have been accounted for as liability-classified awards and resulted in $242 of stock-based compensation expense in 2025.
The fair value of cash-settled RSUs was initially determined based on the fair value of the Company’s stock on the grant date, with awards being remeasured at the end of each reporting period until settlement. Compensation expense is based upon the remeasured fair value multiplied by the percentage of the requisite service that has been rendered as of the remeasurement date. Our policy is to recognize forfeitures of cash-settled RSUs as they occur.
Performance share units. PSUs are granted to eligible employees and represent the right to receive common stock upon the achievement of certain performance-based or market conditions. A target number of PSUs are awarded on the grant date and recipients are eligible to earn shares of common stock between 0 % and 200 % of the target. PSUs earned, if any, cliff vest at the end of the second or third year following the date of grant based on the degree of satisfaction of the applicable conditions.
Prior to 2024, PSUs were granted to eligible employees with vesting based on both performance-based and market conditions. 75 % of an employee’s grant was based on the Company’s relative total shareholder return (“TSR”) performance compared to the peer group in our Proxy Statement covering calendar year 2023, with the remaining 25 % based on actual Company performance as compared to the achievement of targeted Adjusted EBITDA.
In 2024, PSUs were granted to eligible employees with vesting based solely on a market condition tied to the Company’s relative TSR performance compared to the S&P SmallCap 600 Industrials index.
In 2025, PSUs were granted to eligible employees with vesting based on the following performance-based conditions: (1) 100 % cumulative targeted Adjusted EBITDA or (2) 50 % cumulative targeted Adjusted EBITDA and 50 % cumulative targeted Adjusted Free Cash Flow.
The fair value of the above-described performance-based awards was initially based on the fair value of the Company’s stock on the grant date, with awards being remeasured at the end of each reporting period in accordance with the estimated probable satisfaction of the performance condition. Compensation expense is based on the remeasured fair value multiplied by the percentage of the requisite service that has been rendered as of the remeasurement date. The fair value of PSUs with market conditions was based on a third-party valuation simulating a range of possible outcomes, with the resulting value being ratably recognized to compensation expense over the vesting period. Our policy is to recognize forfeitures of PSUs as they occur.
A summary of the activity of our unvested RSAs issued is as follows:
| 2016 Plan | 2025 Plan | ||||||||||||||||||||||
| Shares | Weighted Average Grant Date Fair Value | Shares | Weighted Average Grant Date Fair Value | ||||||||||||||||||||
| Balance at December 31, 2023 | $ | $ | |||||||||||||||||||||
| Granted | |||||||||||||||||||||||
| Vested | ( | ||||||||||||||||||||||
| Forfeited | ( | ||||||||||||||||||||||
| Balance at December 31, 2024 | $ | $ | |||||||||||||||||||||
| Granted | |||||||||||||||||||||||
| Vested | ( | ||||||||||||||||||||||
| Forfeited | ( | ||||||||||||||||||||||
| Balance at December 31, 2025 | $ | $ | |||||||||||||||||||||
78
A summary of the activity of our unvested RSUs issued is as follows:
| 2016 Plan | 2025 Plan | ||||||||||||||||||||||
| Shares | Weighted Average Grant Date Fair Value | Shares | Weighted Average Grant Date Fair Value | ||||||||||||||||||||
| Balance at December 31, 2023 | $ | $ | |||||||||||||||||||||
| Granted | |||||||||||||||||||||||
| Vested | ( | ||||||||||||||||||||||
| Forfeited | |||||||||||||||||||||||
| Balance at December 31, 2024 | $ | $ | |||||||||||||||||||||
| Granted | |||||||||||||||||||||||
| Vested | ( | ||||||||||||||||||||||
| Forfeited | |||||||||||||||||||||||
| Balance at December 31, 2025 | $ | $ | |||||||||||||||||||||
A summary of the activity of our unvested PSUs issued is as follows:
| 2016 Plan | 2025 Plan | |||||||||||||||||||||||||
Shares (1) | Weighted Average Grant Date Fair Value | Shares (1) | Weighted Average Grant Date Fair Value | |||||||||||||||||||||||
| Balance at December 31, 2023 | $ | $ | ||||||||||||||||||||||||
| Granted | ||||||||||||||||||||||||||
| Vested | ( | |||||||||||||||||||||||||
| Forfeited | ( | |||||||||||||||||||||||||
| Balance at December 31, 2024 | $ | $ | ||||||||||||||||||||||||
| Granted | ||||||||||||||||||||||||||
| Vested | ( | |||||||||||||||||||||||||
| Forfeited | ( | |||||||||||||||||||||||||
| Balance at December 31, 2025 | $ | $ | ||||||||||||||||||||||||
(1) The number of PSUs granted assumes target shares of 100
As of December 31, 2025, total unrecognized stock-based compensation related to unvested awards was as follows:
Unrecognized Stock Compensation | Weighted Average Recognition Period | |||||||||||||
| Unvested RSAs | $ | |||||||||||||
Unvested RSUs | $ | |||||||||||||
| Unvested PSUs | $ | |||||||||||||
Stockholders Protection Rights Agreement
On June 5, 2024, the Board adopted the Rights Agreement and declared a dividend of one Right for each share of the Company’s common stock outstanding at the close of business on June 17, 2024. One Right will also be issued together with each share of common stock issued by the Company after that date, but before the Separation Time (as defined in the Rights Agreement). Each Right initially represents the right to purchase one one-thousandth (0.001 ) of a share of Series B Participating Preferred Stock for $75.00 , subject to adjustment and upon such terms and subject to the conditions set forth in the Rights Agreement. Rights will generally become exercisable if any person (or any persons acting as a group) acquires “Beneficial Ownership” (as defined in the Rights Agreement) of 10 %, or 20 % in the case of certain passive investors, or more of the Company’s outstanding common stock. If Rights become exercisable, all holders of Rights (other than the person, entity or group triggering the Rights Agreement, whose rights will become void and will not be exercisable) will have the right to
79
purchase from the Company for $75.00 , subject to certain potential adjustments, shares of the Company’s common stock having a market value of twice that amount.
On May 30, 2025, the Company entered into Amendment No. 1 to the Rights Agreement (the “Rights Agreement Amendment”). Pursuant to the Rights Agreement Amendment, the expiration time of the Rights was extended for one year to June 4, 2026, unless the Rights are earlier redeemed, exchanged or terminated in accordance with the terms and conditions of the Rights Agreement, as amended. Except for the extension of the expiration time, the Rights Agreement remains unaltered and in full force and effect. There is currently no impact on the Company’s Consolidated Financial Statements.
The Company’s Certificate of Incorporation authorizes the issuance of preferred stock. However, as of December 31, 2025, no preferred stock has been issued.
9. EMPLOYEE BENEFIT PLANS
401(k) Plan
We offer a contributory 401(k) plan to our U.S. employees. We make matching contributions equal to 100 % of each employee’s contribution up to 3 % of qualified compensation and 50 % of the next 2 % of qualified compensation contributed by each employee. Total DMC contributions were $2,585 , $2,694 , and $2,590 for the years ended December 31, 2025, 2024, and 2023, respectively.
Foreign Subsidiary Defined Benefit and Defined Contribution Plans
We have defined benefit pension plans at certain foreign subsidiaries for which we have recorded an unfunded pension obligation of $1,423 and $1,415 as of December 31, 2025, and 2024, respectively, which is included in “Other long-term liabilities” in the Consolidated Balance Sheets. Annual adjustments to the obligation are based upon actuarial calculations and are recorded within “General and administrative expenses” in the Consolidated Statements of Operations. We recognized income of $166 for the year ended December 31, 2025, and expense of $11 and $91 for the years ended December 31, 2024, and 2023, respectively.
In 2020, a new defined contribution pension plan went into effect for employees at certain foreign subsidiaries, which replaced the defined benefit plan described above. Under the new plan, pension benefits will be financed both through contributions by the Company and employees. The Company contributes between 1.5 % and 4.5 % of an employee’s salary annually. During the years ended December 31, 2025, 2024, and 2023, the Company contributed $289 , $287 , and $285 , respectively, to the defined contribution plan. Past contributions into the defined benefit plan were unchanged by the new defined contribution plan.
Deferred Compensation Plan
The Company maintains a Non-Qualified Deferred Compensation Plan (the “Plan”) as part of its overall compensation package for certain employees. Until enrollment in the Plan was suspended effective January 1, 2025, participants were eligible to defer a portion of their annual salary, their annual incentive bonus, and their equity awards through the Plan on a tax-deferred basis. Deferrals into the Plan were not matched or subsidized by the Company, nor were they eligible for above-market or preferential earnings.
The Plan provides for deferred compensation obligations to be settled either by delivery of a fixed number of shares of DMC’s common stock or in cash, in accordance with participant contributions and elections. For deferred equity awards, subsequent to equity award vesting and after a period prescribed by the Plan, participants historically could elect to diversify contributions of equity awards into other investment options available to Plan participants. Once diversified, such contributions are settled by delivery of cash.
The Company has established a grantor trust commonly known as a “rabbi trust” and contributed certain assets to partially satisfy the future obligations to participants in the Plan. These assets are subject to potential claims of the Company’s general creditors. The assets held in the trust primarily include company-owned life insurance (“COLI”) on certain current and former employees and money market funds. COLI is accounted for at the cash surrender value while money market funds held by the trust are accounted for at fair value.
80
Deferred unvested RSAs and deferred common stock held by the trust are reflected in the Consolidated Balance Sheets within “Treasury stock, at cost, and company stock held for deferred compensation, at par” at the par value of the common stock or unvested RSAs. These accounts are not adjusted for subsequent changes in the fair value of the common stock.
Deferred compensation obligations that will be settled in cash are accounted for on an accrual basis in accordance with the terms of the Plan. These obligations are adjusted based on changes in value of the underlying investment options chosen by Plan participants. Deferred compensation obligations that will be settled by delivery of a fixed number of previously vested shares of the Company’s common stock are reflected in the Consolidated Statements of Stockholders’ Equity and Redeemable Noncontrolling Interest within “Common stock” at the par value of the common stock or unvested RSAs. These accounts are not adjusted for subsequent changes in the fair value of the common stock.
The balances related to the deferred compensation plan were as follows for the periods presented. The amounts included within “Prepaid expenses and other” and “Other current liabilities” pertain to scheduled distributions per the terms of the Plan that will occur within twelve months of December 31, 2025.
| Consolidated Balance Sheet location | December 31, 2025 | December 31, 2024 | |||||||||||||||
| Deferred compensation assets | Prepaid expenses and other | $ | $ | ||||||||||||||
| Deferred compensation assets | Other assets | $ | $ | ||||||||||||||
| Deferred compensation obligations | Other current liabilities | $ | $ | ||||||||||||||
| Deferred compensation obligations | Other long-term liabilities | $ | $ | ||||||||||||||
10. INCOME TAXES
The domestic and foreign components of (loss) income before income taxes for our operations consist of the following for the years ended December 31:
| 2025 | 2024 | 2023 | |||||||||||||||
| Domestic | $ | ( | $ | ( | $ | ||||||||||||
| Foreign | |||||||||||||||||
| (Loss) income before income taxes | $ | ( | $ | ( | $ | ||||||||||||
The components of the provision for income taxes consist of the following for the years ended December 31:
| 2025 | 2024 | 2023 | |||||||||||||||
| Current – Federal | $ | ( | $ | $ | |||||||||||||
| Current – State | |||||||||||||||||
| Current – Foreign | |||||||||||||||||
| Current income tax expense | |||||||||||||||||
| Deferred – Federal | ( | ||||||||||||||||
| Deferred – State | |||||||||||||||||
| Deferred – Foreign | |||||||||||||||||
| Deferred income tax expense | |||||||||||||||||
| Income tax provision | $ | $ | $ | ||||||||||||||
81
Incomes taxes paid, net of refunds, exceeds 5 percent of total income taxes paid, net of refunds, in the following jurisdictions for the year ended December 31:
| 2025 | |||||||||||||||||
Federal | $ | ||||||||||||||||
State | |||||||||||||||||
Foreign | |||||||||||||||||
Germany | |||||||||||||||||
All other foreign | |||||||||||||||||
Total income taxes paid, net of refunds | $ | ||||||||||||||||
Our deferred tax assets and liabilities consist of the following at December 31:
| 2025 | 2024 | ||||||||||
| Deferred tax assets: | |||||||||||
| Net operating loss carryforward | $ | $ | |||||||||
| Inventory differences | |||||||||||
| Equity compensation | |||||||||||
| Investment in joint venture | |||||||||||
| Restructuring | |||||||||||
| Purchased intangible assets and goodwill | |||||||||||
| Accrued employee compensation and benefits | |||||||||||
| Lease liabilities | |||||||||||
| Interest expense | |||||||||||
| Research and development costs | |||||||||||
| Other, net | |||||||||||
| Gross deferred tax assets | |||||||||||
| Less valuation allowances | ( | ( | |||||||||
| Total deferred tax assets | |||||||||||
| Deferred tax liabilities: | |||||||||||
| Depreciation and amortization | ( | ( | |||||||||
| Right-of-use assets | ( | ( | |||||||||
| Other, net | ( | ( | |||||||||
| Total deferred tax liabilities | ( | ( | |||||||||
| Net deferred tax assets | $ | $ | |||||||||
As of December 31, 2025, we had loss carryforwards for tax purposes totaling approximately $68,322 , comprised of $36,395 foreign, $19,469 domestic federal, and $12,458 domestic state loss carryforwards, which will be available to offset future taxable income in certain jurisdictions. Federal and most foreign losses can be carried forward indefinitely, while all other losses generally have carryforward periods of 5 to 20 years, depending on jurisdiction. We have analyzed the net operating losses and established valuation allowances on those where we have determined the realization is not more likely than not to occur.
We assess the available positive and negative evidence to estimate if sufficient future taxable income will be generated to use existing deferred tax assets. Additionally, a three-year cumulative loss at a consolidated financial statement level may be viewed as negative evidence impacting a jurisdiction that by itself is not in a three-year cumulative loss position. As of December 31, 2025, we were in a three-year cumulative loss position at the consolidated financial statement level, driven by losses in the U.S. primarily related to the impairment of Arcadia Products’ goodwill in 2024. Accordingly, we have maintained the previously established valuation allowance against the corresponding net deferred tax assets in the U.S as of December 31,
82
2025. The Company will continue to monitor the realizability of deferred tax assets and the need for valuation allowances and will record adjustments in the period in which facts support such changes.
The changes in valuation allowances were as follows for the years ended December 31:
| 2025 | 2024 | 2023 | |||||||||||||||
Balance at January 1 | $ | $ | $ | ||||||||||||||
Charged (credited) to expenses | ( | ||||||||||||||||
Charged (credited) to other comprehensive loss | ( | ||||||||||||||||
Balance at December 31 | $ | $ | $ | ||||||||||||||
The table below provides the updated requirements of ASU 2023-09 for the year ended December 31, 2025. See Note 2 “Significant Accounting Policies - Recent Accounting Pronouncements” for additional details on the adoption of ASU 2023-09. A reconciliation of our income tax provision computed by applying the Federal statutory income tax rate of 21% to income (loss) before taxes is as follows for the year ended December 31:
| 2025 | |||||||||||||||||||||||||||||
(in thousands, except percentages) | |||||||||||||||||||||||||||||
$ | % | ||||||||||||||||||||||||||||
Income tax benefit at statutory federal rate | $ | ( | % | ||||||||||||||||||||||||||
State and local taxes, net of federal income tax effect (1) | ( | % | |||||||||||||||||||||||||||
| Foreign tax effects | |||||||||||||||||||||||||||||
| Germany | |||||||||||||||||||||||||||||
Statutory tax rate difference between Germany and United States | ( | % | |||||||||||||||||||||||||||
Change in valuation allowance | ( | % | |||||||||||||||||||||||||||
| Nontaxable or nondeductible items | ( | % | |||||||||||||||||||||||||||
| Other | ( | % | |||||||||||||||||||||||||||
Other foreign | ( | % | |||||||||||||||||||||||||||
| Other | ( | % | |||||||||||||||||||||||||||
Change in valuation allowance | ( | % | |||||||||||||||||||||||||||
| Nontaxable or nondeductible items | |||||||||||||||||||||||||||||
Income attributable to noncontrolling interest | ( | % | |||||||||||||||||||||||||||
| Permanent items | ( | % | |||||||||||||||||||||||||||
| Equity compensation | ( | % | |||||||||||||||||||||||||||
Executive compensation limitations | ( | % | |||||||||||||||||||||||||||
Change in unrecognized tax benefits | ( | % | |||||||||||||||||||||||||||
| Other | ( | % | |||||||||||||||||||||||||||
| Income tax provision | $ | ( | % | ||||||||||||||||||||||||||
(1) State taxes in California and Texas contributed to the majority (greater than 50%) of the tax effect in this line item.
83
As previously disclosed prior to the adoption of ASU 2023-09, the reconciliation of our income tax provision computed by applying the Federal statutory income tax rate of 21% to (loss) income before income taxes is as follows for the years ended December 31:
| 2024 | 2023 | ||||||||||||||||
| Statutory U.S. federal income tax | $ | ( | $ | ||||||||||||||
| Foreign rate differential | |||||||||||||||||
| Permanent items | |||||||||||||||||
| U.S. state income tax, net of federal benefit | ( | ||||||||||||||||
Loss (income) attributable to noncontrolling interest | ( | ||||||||||||||||
| Equity compensation | |||||||||||||||||
| Return to provision adjustments | ( | ||||||||||||||||
| Deemed repatriation of foreign earnings | |||||||||||||||||
| Other | |||||||||||||||||
| Change in valuation allowances | ( | ||||||||||||||||
Income tax provision | $ | $ | |||||||||||||||
DMC files income tax returns in the U.S. federal jurisdiction, as well as various U.S. state and foreign jurisdictions. In 2024, tax audits in Germany of both our NobelClad and DynaEnergetics subsidiaries commenced for the years 2019 through 2021. Our tax provisions reflect our best estimate of state, local, federal, and foreign taxes. While the audits are not unexpected, the outcome cannot be predicted with certainty. If any issues addressed in the Company’s tax audits are resolved in a manner not consistent with our expectations, the Company could be required to adjust its provisions for income taxes in the period such resolution occurs.
DMC’s U.S. federal tax returns are open for examination for the tax years 2022 onward. Most of DMC’s state tax returns remain open to examination for the tax years 2021 onward. DMC’s foreign tax returns generally remain open to examination for the tax years 2021 onward, depending on jurisdiction.
At December 31, 2025 and 2024, the balance of unrecognized tax benefits was $5,725 and $5,240 , respectively. Included in the balance of unrecognized tax benefits as of December 31, 2025, are $4,968 of tax benefits that, if recognized, would affect the effective tax rate. We recognize interest and penalties related to uncertain tax positions in operating expense. As of December 31, 2025, and 2024, our accrual for interest and penalties related to uncertain tax positions were $74 , and $81 , respectively.
A reconciliation of the beginning and ending amount of unrecognized tax benefits is as follows:
| 2025 | 2024 | 2023 | ||||||||||||||||||||||||
| Unrecognized tax benefits, beginning balance | $ | $ | $ | |||||||||||||||||||||||
(Reductions) additions based on tax positions related to the current year | ( | |||||||||||||||||||||||||
Additions (reductions) based on tax positions related to prior years | ( | |||||||||||||||||||||||||
| Settlements | ||||||||||||||||||||||||||
| Unrecognized tax benefits, ending balance | $ | $ | $ | |||||||||||||||||||||||
The Tax Cuts and Jobs Act (“TCJA”), enacted in December 2017, provides that foreign earnings generally can be repatriated to the U.S. without federal tax consequence; however, if any such earnings were ultimately distributed to the U.S. in the form of dividends or otherwise, or if the shares of our international subsidiaries were sold or transferred, we could be subject to additional U.S. federal and state income taxes, as well as foreign withholding taxes. We continually reassess the assertion that cumulative earnings by our foreign subsidiaries are indefinitely reinvested. The simultaneous downturns in two of our businesses in 2024 led to the determination that we may need to access previously reinvested earnings of our international subsidiaries. As such, in 2024, we recorded a deferred tax liability of $168 , representing potential taxes that could result from the distribution of foreign earnings to the U.S. parent. The balance of this deferred tax liability at December 31, 2025, was $470 .
84
On July 4, 2025, the One Big Beautiful Bill Act (“OBBBA”) was signed into law. The OBBBA includes significant tax provisions, such as the permanent extension of certain expiring provisions of the TCJA, modifications to the international tax framework and the restoration of favorable tax treatment for certain business provisions. The legislation has multiple effective dates through 2027. The OBBBA did not have a material impact on our tax provision, but we anticipate a reduction to cash taxes paid in future years primarily due to favorable provisions related to depreciation and interest deductions.
11. BUSINESS SEGMENTS
Our business is currently organized into three segments: Arcadia Products, DynaEnergetics, and NobelClad. In December 2021, DMC acquired a 60 % controlling interest in Arcadia Products. Arcadia Products designs, engineers, fabricates, and finishes aluminum framing systems, windows, curtain walls, storefronts, entrance systems, and interior partitions to the commercial construction market. Additionally, Arcadia Products supplies customized windows and doors to the high-end residential construction market. DynaEnergetics designs, manufactures, markets and sells perforating systems and associated hardware for the global oil and gas industry. NobelClad produces explosion-welded clad metal plates for use in the construction of corrosion resistant industrial processing equipment and specialized transition joints for commuter rail cars, ships, and LNG processing equipment.
Our reportable segments are separately managed, strategic business units that offer different products. Each segment’s products are marketed to different customer types and require different manufacturing processes and technologies, and each segment has separate financial information available. The Chief Operating Decision Maker (“CODM”) uses segment operating income or loss to allocate resources (including employees, property, and financial or capital resources) for each segment in the budget and forecasting process and to assess ongoing performance on a monthly basis. The CODM does not review total assets by segment for purposes of assessing segment performance and allocating resources. As such, the disclosure of total assets by segment has not been included below. The accounting policies of our reportable segments are the same as those described in Note 2 “Significant Accounting Policies”. The Company’s CODM is our Board of Directors.
Segment information is as follows for the year ended December 31, 2025:
| Arcadia Products | DynaEnergetics | NobelClad | Total | ||||||||||||||||||||
| Net sales | $ | $ | $ | $ | |||||||||||||||||||
| Cost of products sold | |||||||||||||||||||||||
| Gross profit | |||||||||||||||||||||||
| Stock-based compensation* | |||||||||||||||||||||||
| General and administrative expenses | |||||||||||||||||||||||
| Selling and distribution expenses | |||||||||||||||||||||||
| Amortization of purchased intangible assets | |||||||||||||||||||||||
| Restructuring expenses and asset impairments | |||||||||||||||||||||||
| Operating income | |||||||||||||||||||||||
| Unallocated corporate expenses | ( | ||||||||||||||||||||||
| Unallocated stock-based compensation* | ( | ||||||||||||||||||||||
| Other expense, net | ( | ||||||||||||||||||||||
| Interest expense, net | ( | ||||||||||||||||||||||
| Loss before income taxes | ( | ||||||||||||||||||||||
| Income tax provision | |||||||||||||||||||||||
| Net loss | $ | ( | |||||||||||||||||||||
85
Segment information is as follows for the year ended December 31, 2024:
| Arcadia Products | DynaEnergetics | NobelClad | Total | ||||||||||||||||||||||||||
| Net sales | $ | $ | $ | $ | |||||||||||||||||||||||||
| Cost of products sold | |||||||||||||||||||||||||||||
| Gross profit | |||||||||||||||||||||||||||||
| Stock-based compensation* | |||||||||||||||||||||||||||||
| General and administrative expenses | |||||||||||||||||||||||||||||
| Selling and distribution expenses | |||||||||||||||||||||||||||||
| Amortization of purchased intangible assets | |||||||||||||||||||||||||||||
| Restructuring expenses and asset impairments | |||||||||||||||||||||||||||||
Goodwill impairment | |||||||||||||||||||||||||||||
| Operating (loss) income | ( | ( | |||||||||||||||||||||||||||
| Unallocated corporate expenses | ( | ||||||||||||||||||||||||||||
| Unallocated stock-based compensation* | ( | ||||||||||||||||||||||||||||
| Other expense, net | ( | ||||||||||||||||||||||||||||
| Interest expense, net | ( | ||||||||||||||||||||||||||||
| Loss before income taxes | ( | ||||||||||||||||||||||||||||
| Income tax provision | |||||||||||||||||||||||||||||
| Net loss | $ | ( | |||||||||||||||||||||||||||
Segment information is as follows for the year ended December 31, 2023:
| Arcadia Products | DynaEnergetics | NobelClad | Total | ||||||||||||||||||||
| Net sales | $ | $ | $ | $ | |||||||||||||||||||
| Cost of products sold | |||||||||||||||||||||||
| Gross profit | |||||||||||||||||||||||
| Stock-based compensation* | |||||||||||||||||||||||
| General and administrative expenses | |||||||||||||||||||||||
| Selling and distribution expenses | |||||||||||||||||||||||
| Amortization of purchased intangible assets | |||||||||||||||||||||||
| Restructuring expenses and asset impairments | |||||||||||||||||||||||
| Operating income | |||||||||||||||||||||||
| Unallocated corporate expenses | ( | ||||||||||||||||||||||
| Unallocated stock-based compensation* | ( | ||||||||||||||||||||||
| Other expense, net | ( | ||||||||||||||||||||||
| Interest expense, net | ( | ||||||||||||||||||||||
| Income before income taxes | |||||||||||||||||||||||
| Income tax provision | |||||||||||||||||||||||
| Net income | $ | ||||||||||||||||||||||
* Stock-based compensation is not allocated to wholly owned segments DynaEnergetics and NobelClad. Stock-based compensation is allocated to the Arcadia Products segment as 60 40
86
| 2025 | 2024 | 2023 | |||||||||||||||
| Depreciation and Amortization: | |||||||||||||||||
Arcadia Products | $ | $ | $ | ||||||||||||||
| DynaEnergetics | |||||||||||||||||
| NobelClad | |||||||||||||||||
| Segment depreciation and amortization | |||||||||||||||||
| Corporate and other | |||||||||||||||||
| Consolidated depreciation and amortization | $ | $ | $ | ||||||||||||||
The geographic location of our property, plant and equipment, net of accumulated depreciation, is as follows at December 31:
| 2025 | 2024 | ||||||||||
| United States | $ | $ | |||||||||
| Germany | |||||||||||
| Canada | |||||||||||
| France | |||||||||||
| Rest of the world | |||||||||||
| Total | $ | $ | |||||||||
| 2025 | 2024 | 2023 | |||||||||||||||
| Acquisition of property, plant and equipment: | |||||||||||||||||
Arcadia Products | $ | $ | $ | ||||||||||||||
| DynaEnergetics | |||||||||||||||||
NobelClad (1) | |||||||||||||||||
| Segment acquisition of property, plant and equipment | |||||||||||||||||
| Corporate and other | |||||||||||||||||
| Consolidated acquisition of property, plant and equipment | $ | $ | $ | ||||||||||||||
(1) Excludes proceeds from property, plant and equipment reimbursements as described in Note 2 “Significant Accounting Policies”.
The disaggregation of revenue earned from contracts with customers is based on the geographic location of the customer. For Arcadia Products, net sales have been presented consistent with United States regional definitions as provided by the American Institute of Architects. For DynaEnergetics and NobelClad, all net sales are from products shipped from our manufacturing facilities and distribution centers located in the United States, Germany, and Canada. The following represents our net sales based on the geographic location of the customer for years ended December 31:
Arcadia Products
| 2025 | 2024 | 2023 | ||||||||||||||||||
| West | $ | $ | $ | |||||||||||||||||
| South | ||||||||||||||||||||
| Northeast | ||||||||||||||||||||
| Midwest | ||||||||||||||||||||
Total Arcadia Products | $ | $ | $ | |||||||||||||||||
87
DynaEnergetics
| 2025 | 2024 | 2023 | |||||||||||||||
| United States | $ | $ | $ | ||||||||||||||
| Canada | |||||||||||||||||
| Kuwait | |||||||||||||||||
| Oman | |||||||||||||||||
| Indonesia | |||||||||||||||||
| Egypt | |||||||||||||||||
| United Arab Emirates | |||||||||||||||||
| Iraq | |||||||||||||||||
| India | |||||||||||||||||
Rest of the world (1) | |||||||||||||||||
| Total DynaEnergetics | $ | $ | $ | ||||||||||||||
(1) Rest of the world does not include any individual country comprising sales greater than 2% of total DynaEnergetics revenue.
NobelClad
| 2025 | 2024 | 2023 | |||||||||||||||
| United States | $ | $ | $ | ||||||||||||||
| Germany | |||||||||||||||||
| Canada | |||||||||||||||||
| South Korea | |||||||||||||||||
| China | |||||||||||||||||
| Belgium | |||||||||||||||||
| Saudi Arabia | |||||||||||||||||
| France | |||||||||||||||||
| United Arab Emirates | |||||||||||||||||
| Netherlands | |||||||||||||||||
Rest of the world (1) | |||||||||||||||||
| Total NobelClad | $ | $ | $ | ||||||||||||||
(1) Rest of the world does not include any individual country comprising sales greater than 3% of total NobelClad revenue.
During the years ended December 31, 2025, 2024, and 2023, one DynaEnergetics customer accounted for approximately 26 %, 23 %, and 15 %, respectively, of consolidated net sales. Additionally, the same DynaEnergetics customer accounted for approximately 32 % and 30 % of consolidated accounts receivable as of December 31, 2025, and 2024, respectively.
12. DERIVATIVE INSTRUMENTS
We are exposed to foreign currency exchange risk resulting from fluctuations in exchange rates, primarily the U.S. dollar to the euro, the U.S. dollar to the Canadian dollar and, to a lesser extent, other currencies, arising from intercompany and third-party transactions entered into by our subsidiaries that are denominated in currencies other than their functional currency. Changes in exchange rates with respect to these transactions result in unrealized gains or losses if such transactions are unsettled at the end of the reporting period or realized gains or losses at settlement of the transaction. We use foreign currency forward contracts to offset foreign exchange rate fluctuations on foreign currency denominated asset and liability positions. None of these contracts are designated as accounting hedges, and all changes in the fair value of forward contracts are recognized in “Other expense, net” within our Consolidated Statements of Operations.
We execute derivatives with a specialized foreign exchange brokerage firm as well as other large financial institutions. The primary credit risk inherent in derivative agreements is the possibility that a loss may occur from the nonperformance of a counterparty to the agreements. We perform a review of the credit risk of our counterparties at the inception of the contract and
88
on an ongoing basis. We anticipate that our counterparties will be able to fully satisfy their obligations under the agreement but will take action if doubt arises regarding the counterparties’ ability to perform.
As of December 31, 2025, and 2024, the net notional amounts of forward contracts the Company held were $10,858 and $8,331 , respectively. At December 31, 2025, and 2024, the fair value of outstanding forward contracts was $0
The following table reflects the location and amount of net (losses) gains from our foreign currency contracts for the years presented. These net (losses) gains offset foreign currency gains and losses recorded in the normal course of business, which are not shown below.
| Derivative type | Statements of Operations Location | 2025 | 2024 | 2023 | ||||||||||||||||||||||
| Foreign currency contracts | Other expense, net | $ | $ | ( | $ | |||||||||||||||||||||
13. COMMITMENTS AND CONTINGENCIES
Contingent Liabilities
The Company records an accrual for contingent liabilities when a loss is both probable and reasonably estimable. If some amount within a range of loss appears to be a better estimate than any other amount within the range, that amount is accrued. When no amount within a range of loss appears to be a better estimate than any other amount, the lowest amount in the range is accrued.
Legal Proceedings
In the ordinary course of its business, the Company is involved in a number of lawsuits and claims, both actual and potential. In addition to the matters discussed below, various other lawsuits, claims, and proceedings have been or may be instituted or asserted against the Company, including those pertaining to environmental, safety and health, commercial, tax, product liability, intellectual property infringement and employment matters, and other actions and claims arising out of the normal course of business. Although it is difficult to accurately predict the outcome of any such proceedings, based on facts currently available, management believes that the disposition of these other matters that are pending or asserted will not have a material adverse effect, individually or in the aggregate, on the financial position of the Company.
Stockholder Litigation
On December 6, 2024, Samuel Garson, individually and on behalf of a putative class, filed a securities class action lawsuit in the United States District Court for the District of Colorado (the “District Court”) against the Company and other defendants (collectively, the “Defendants”). The complaint asserted violations of Sections 10(b) and 20(a) of the Exchange Act and Rule 10b5-1 promulgated thereunder on behalf of a putative class of all persons who purchased the Company’s securities between May 3, 2024, and November 4, 2024. In particular, the complaint alleged that the Defendants made false and misleading statements during the class period concerning the Company’s business resulting in injury to the purported class members. On January 27, 2025, a second securities class action lawsuit was filed in the District Court by Alessandro Laurent, individually and of behalf of a putative class, asserting substantially the same allegations, but on behalf of all purchasers of the Company’s securities between January 29, 2024 and November 4, 2024. Both complaints sought certification of a class of purchasers of the Company’s securities during the respective class periods and an award of damages, interest, costs and expenses (including attorney’s fees) to the respective plaintiffs and class members. On February 5, 2025, the District Court ordered the two lawsuits consolidated, and on June 23, 2025, the lead plaintiff in the consolidated case filed an amended complaint adding additional allegations within the class period. On August 22, 2025, the Defendants moved to dismiss all claims in the consolidated case.
On June 6, 2025, Michael Lewis filed a related stockholder derivative lawsuit in the District Court against the Company as nominal defendant and certain directors and officers, alleging breaches of fiduciary duties under Delaware law and violations of Section 14(a) of the Exchange Act, based in significant part on the allegations made in the Garson and Laurent complaints. On July 16, 2025, Lee Runey filed another related stockholder derivative lawsuit, also in the District Court, against the Company as nominal defendant and certain directors and officers, alleging breaches of fiduciary duties and other similar claims under Delaware law as well as violations of Section 14(a) of the Exchange Act, based in significant part on the allegations made in Lewis and the amended complaint in Garson. On August 23, 2025, the parties in both derivative cases jointly requested that the District Court consolidate and stay the derivative cases until after a ruling is issued on the pending Garson motion to dismiss, and the District Court granted such request on October 14, 2025.
89
The Company intends to vigorously defend itself against the foregoing actions.
Due to the nature of these matters and inherent uncertainties, it is not possible to provide an evaluation of the likelihood of an unfavorable outcome or an estimate of the amount or range of potential loss, if any, in these circumstances.
Stormwater Regulatory Matter
In 2024, the Company entered into a Consent Decree with Los Angeles Waterkeeper (“Waterkeeper”) to settle a citizen suit alleging stormwater-related violations of the Clean Water Act at three Arcadia Products facilities located in Vernon, California. The Consent Decree requires the Company to undertake certain improvements to its stormwater management infrastructure and practices at all three facilities over the next several years. The Consent Decree was entered by the U.S. District Court for the Central District of California following a U.S. Department of Justice 45-day review period.
The Company also has been in contact with the Los Angeles Regional Water Quality Control Board to address certain alleged violations of stormwater regulatory requirements that may be subject to mandatory minimum penalties under applicable California law. The Company cannot predict how this matter will be resolved, but has accrued $408 in aggregate as of December 31, 2025 to address potential claims.
Other Matters
The Company has been notified by a customer of a potential performance issue involving one of NobelClad’s products. As of the date of this report, no legal claim has been asserted, and no legal proceeding has commenced. We are currently evaluating the matter, including by conducting internal testing. The Company has determined that a loss related to this matter is reasonably possible; however, we are unable at this time to reasonably estimate the amount or range of any potential loss. Accordingly, no liability has been recorded in the Consolidated Financial Statements.
Factors that will impact the amount of loss in this matter, if any, include the results of ongoing testing, the scope and cost of any product replacement or remediation, the allocation of responsibility among the customer, the Company, and any relevant third-parties, and the extent of available insurance coverage and recoveries.
14. STRATEGIC REVIEW AND RELATED EXPENSES
In January 2024, the Company announced that the Board had initiated a review of strategic alternatives for the DynaEnergetics and NobelClad segments. In conjunction with the Board’s consideration of various strategic, business, and financial alternatives, the Company incurred significant expenses. In October 2024, the Company announced that the Board was no longer actively marketing the DynaEnergetics and NobelClad segments. However, in response to subsequent inquiries and actions of certain stockholders, the Company has continued to incur significant expenses as the Board satisfies its fiduciary obligations with respect to such inquiries.
During the year ended December 31, 2025, strategic review and related expenses were $2,690 , and primarily included $2,099 in professional service fees and $366 in employee retention compensation, including $36 of stock-based compensation. During the year ended December 31, 2024, strategic review and related expenses were $7,765 , and primarily included $4,076 in professional service fees and $2,988 in employee retention compensation, including $372 of stock-based compensation.
90
ITEM 9. Changes in and Disagreements with Accountants on Accounting and Financial Disclosure
There are no changes in or disagreements with accountants on accounting and financial disclosure for the fiscal year ended December 31, 2025.
ITEM 9A. Controls and Procedures
Evaluation of Disclosure Controls and Procedures
Our Chief Executive Officer and Chief Financial Officer have evaluated the effectiveness of our disclosure controls and procedures (as defined in Rules 13a-15(e) and 15d-15(e) under the Securities Exchange Act of 1934). Based on that evaluation, the Company’s Chief Executive Officer and Chief Financial Officer concluded that the Company’s disclosure controls and procedures were effective as of December 31, 2025. Our management’s annual report on internal control over financial reporting is set forth below.
Management’s Report on Internal Control over Financial Reporting
The management of DMC Global Inc. (“DMC” or the “Company”) is responsible for establishing and maintaining adequate internal control over financial reporting, as such term is defined in Exchange Act Rules 13a-15(f) and 15d-15(f).
Under the supervision and with the participation of DMC’s management, including its Chief Executive Officer and Chief Financial Officer, management conducted an evaluation of the effectiveness of DMC’s internal control over financial reporting as of December 31, 2025, based on the 2013 framework in “Internal Control - Integrated Framework” issued by the Committee of Sponsoring Organizations of the Treadway Commission. In designing and evaluating the internal control over financial reporting, management recognizes that any controls and procedures, no matter how well designed and operated, can provide only reasonable assurance of achieving the desired control objectives. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.
Based upon this evaluation, our Chief Executive Officer and Chief Financial Officer concluded that, as of December 31, 2025, our internal controls over financial reporting were effective.
DMC’s internal control over financial reporting as of December 31, 2025, has also been audited by Ernst & Young LLP, an independent registered public accounting firm, as stated in their attestation report which expressed an unqualified opinion and is included elsewhere herein.
Changes in Internal Control Over Financial Reporting
There has been no change in our internal control over financial reporting (as defined in Rules 13a-15(f) and 15d-15(f) promulgated under the Exchange Act) during the fourth quarter of 2025, that has materially affected, or is reasonably likely to materially affect, our internal control over financial reporting.
91
Report of Independent Registered Public Accounting Firm
To the Stockholders and the Board of Directors of DMC Global Inc.
Opinion on Internal Control Over Financial Reporting
We have audited DMC Global Inc.’s internal control over financial reporting as of December 31, 2025, based on criteria established in Internal Control—Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (2013 framework) (the COSO criteria). In our opinion, DMC Global Inc. (the Company) maintained, in all material respects, effective internal control over financial reporting as of December 31, 2025, based on the COSO criteria.
We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States) (PCAOB), the consolidated balance sheets of the Company as of December 31, 2025 and 2024, the related consolidated statements of operations, comprehensive (loss) income, stockholders’ equity and redeemable noncontrolling interest and cash flows for each of the three years in the period ended December 31, 2025 and the related notes and our report dated February 23, 2026 expressed an unqualified opinion thereon.
Basis for Opinion
The Company’s management is responsible for maintaining effective internal control over financial reporting and for its assessment of the effectiveness of internal control over financial reporting included in the accompanying Management’s Report on Internal Control over Financial Reporting. Our responsibility is to express an opinion on the Company’s internal control over financial reporting based on our audit. We are a public accounting firm registered with the PCAOB and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.
We conducted our audit in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether effective internal control over financial reporting was maintained in all material respects.
Our audit included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, testing and evaluating the design and operating effectiveness of internal control based on the assessed risk, and performing such other procedures as we considered necessary in the circumstances. We believe that our audit provides a reasonable basis for our opinion.
Definition and Limitations of Internal Control Over Financial Reporting
A company’s internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company’s internal control over financial reporting includes those policies and procedures that (1) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (2) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (3) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company’s assets that could have a material effect on the financial statements.
Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.
/s/ Ernst & Young LLP | |||||
| Denver, Colorado | |||||
| February 23, 2026 | |||||
92
ITEM 9B. Other Information
During the quarter ended December 31, 2025, no director or officer (as defined in Rule 16a-1(f) under the Exchange Act) of the Company adopted terminated
ITEM 9C. Disclosure Regarding Foreign Jurisdictions that Prevent Inspections
Not applicable.
93
PART III
ITEM 10. Directors, Executive Officers and Corporate Governance
The information required by Item 10 of Form 10-K will appear in the Company’s proxy statement for its 2026 Annual Meeting of Stockholders under the captions “Proposal 1: Election of Directors,” “Executive Officers,” “Board of Directors,” “Corporate Governance,” “Report of the Audit Committee of the Board of Directors,” and “Delinquent Section 16 Reports” (to the extent reported therein), and the information therein is incorporated herein by reference.
ITEM 11. Executive Compensation
The information required by Item 11 of Form 10-K will appear in the Company’s proxy statement for its 2026 Annual Meeting of Stockholders under the captions “Executive Compensation,” “Summary Compensation Table For Fiscal Year 2025,” “Pay Versus Performance,” “Grants of Plan-Based Awards,” “Employment Agreements,” “Outstanding Equity Awards at Fiscal Year-End 2025,” “Stock Vested During 2025,” “Non-Qualified Deferred Compensation,” “Potential Payments Upon Termination,” “Director Compensation,” and “CEO Pay Ratio for Fiscal Year 2025,” and the information therein is incorporated herein by reference.
ITEM 12. Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters
The information required by Item 12 of Form 10-K will appear in the Company’s proxy statement for its 2026 Annual Meeting of Stockholders under the captions “Equity Compensation Plan Information,” and “Security Ownership of Certain Beneficial Owners and Management,” and the information therein is incorporated herein by reference.
ITEM 13. Certain Relationships and Related Transactions, and Director Independence
The information required by Item 13 of Form 10-K will appear in the Company’s proxy statement for its 2026 Annual Meeting of Stockholders under the captions “Certain Relationships and Related Transactions” and “Board of Directors,” and the information therein is incorporated herein by reference.
ITEM 14. Principal Accountant Fees and Services
The information required by Item 14 of Form 10-K will appear in the Company’s proxy statement for its 2026 Annual Meeting of Stockholders under the caption “Proposal 4: Ratification of Independent Registered Public Accounting Firm” and the information therein is incorporated herein by reference.
94
PART IV
ITEM 15. Exhibits and Financial Statement Schedules
(a)(1) Financial Statements
See Index to Financial Statements in Item 8 of this Annual Report on Form 10-K, which is incorporated herein by reference.
(a)(2) Financial Statement Schedules
All financial statement schedules have been omitted, since the required information is not applicable or is not present in amounts sufficient to require submission of the schedule, or because the information required is included in the Consolidated Financial Statements and accompanying notes included in this Form 10-K.
(a)(3) Exhibits
95
| Exhibit Number | Description | |||||||||||||
10.6 | Restrictive Covenant Agreement, dated December 23, 2021, by and among James Schladen and Victoria Schladen, individually and as trustees of the Schladen Family Trust, Arcadia Products, LLC and DMC Global Inc. (incorporated by reference to Exhibit 10.4 to the Company's Current Report on Form 8-K filed on December 28, 2021). | |||||||||||||
10.7 | ||||||||||||||
10.8 | ||||||||||||||
10.9 | ||||||||||||||
10.10† | ||||||||||||||
10.11† | ||||||||||||||
10.12† | ||||||||||||||
10.13† | ||||||||||||||
10.14† | ||||||||||||||
10.15† | ||||||||||||||
10.16† | ||||||||||||||
10.17† | ||||||||||||||
10.18† | ||||||||||||||
10.19† | ||||||||||||||
10.20† | ||||||||||||||
10.21† | ||||||||||||||
10.22† | ||||||||||||||
10.23† | ||||||||||||||
10.24† | ||||||||||||||
10.25† | ||||||||||||||
10.26† | ||||||||||||||
10.27† | ||||||||||||||
10.28† | ||||||||||||||
96
| Exhibit Number | Description | |||||||||||||
10.29† | ||||||||||||||
10.30† | ||||||||||||||
10.31† | ||||||||||||||
10.32† | ||||||||||||||
10.33† | ||||||||||||||
10.34† | ||||||||||||||
10.35*† | ||||||||||||||
10.36† | ||||||||||||||
10.37† | ||||||||||||||
10.38 | ||||||||||||||
10.39 | ||||||||||||||
10.40† | ||||||||||||||
10.41 | ||||||||||||||
10.42† | ||||||||||||||
10.43* | ||||||||||||||
19.1* | ||||||||||||||
21.1 | ||||||||||||||
23.1* | ||||||||||||||
31.1* | ||||||||||||||
31.2* | ||||||||||||||
32.1** | ||||||||||||||
32.2** | ||||||||||||||
| 97.1 | ||||||||||||||
101.INS | Inline XBRL Instance Document - The instance document does not appear in the Interactive Data File because its XBRL tags are embedded within the Inline XBRL document. | |||||||||||||
101.SCH* | Inline XBRL Schema Document | |||||||||||||
101.CAL* | Inline XBRL Calculation Linkbase Document | |||||||||||||
97
| Exhibit Number | Description | |||||||||||||
101.LAB* | Inline XBRL Label Linkbase Document | |||||||||||||
101.PRE* | Inline XBRL Presentation Linkbase Document | |||||||||||||
101.DEF* | Inline XBRL Taxonomy Extension Definition Linkbase Document | |||||||||||||
| 104 | Cover Page Interactive Data File (formatted as Inline XBRL and contained in Exhibit 101.INS) | |||||||||||||
__________________
* | Filed with this report. | ||||
** | Furnished with this report. | ||||
† | Exhibit constitutes a management contract or compensatory plan or arrangement. | ||||
ITEM 16. Form 10-K Summary
None.
98
SIGNATURES
Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the Company has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.
| DMC Global Inc. | ||||||||
| February 23, 2026 | By: | /s/ Eric V. Walter | ||||||
| Eric V. Walter | ||||||||
| Chief Financial Officer | ||||||||
Pursuant to the requirements of the Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of the Company and in the capacities and on the dates indicated.
| SIGNATURE | TITLE | DATE | ||||||||||||
/s/ James O’Leary | Executive Chairman, President and Chief Executive Officer | February 23, 2026 | ||||||||||||
James O’Leary | (Principal Executive Officer) | |||||||||||||
| /s/ Eric V. Walter | Chief Financial Officer | February 23, 2026 | ||||||||||||
| Eric V. Walter | (Principal Financial Officer) | |||||||||||||
| /s/ Brett Seger | Chief Accounting Officer | February 23, 2026 | ||||||||||||
| Brett Seger | (Principal Accounting Officer) | |||||||||||||
| /s/ Ouma Sananikone | Lead Independent Director | February 23, 2026 | ||||||||||||
| Ouma Sananikone | ||||||||||||||
/s/ John R. Doubman | Director | February 23, 2026 | ||||||||||||
John R. Doubman | ||||||||||||||
| /s/ Ruth I. Dreessen | Director | February 23, 2026 | ||||||||||||
| Ruth I. Dreessen | ||||||||||||||
| /s/ Michael A. Kelly | Director | February 23, 2026 | ||||||||||||
| Michael A. Kelly | ||||||||||||||
| /s/ Clifton Peter Rose | Director | February 23, 2026 | ||||||||||||
| Clifton Peter Rose | ||||||||||||||
/s/ Sharon S. Spurlin | Director | February 23, 2026 | ||||||||||||
| Sharon S. Spurlin | ||||||||||||||
99
EXHIBIT 10.35
INDEMNIFICATION AGREEMENT
THIS INDEMNIFICATION AGREEMENT, dated as of _____________, 2026, is made by and between DMC Global Inc., a Delaware corporation (the “Company”), and ______________ (the “Indemnitee”).
Recitals
1.The Company recognizes that competent and experienced persons are increasingly reluctant to serve or to continue to serve as directors or officers of public corporations unless they are adequately protected through insurance or indemnification, or both, due to increased exposure to litigation costs and risks resulting from their service to such corporations, and due to the fact that the exposure frequently bears no reasonable relationship to the compensation of such directors and officers.
2.The statutes and judicial decisions regarding the duties of directors and officers are often difficult to apply, ambiguous, or conflicting, and therefore fail to provide such directors and officers with adequate, reliable knowledge of legal risks to which they are exposed or information regarding the proper course of action to take.
3.The Company and Indemnitee recognize that plaintiffs often seek damages in such large amounts and the costs of litigation may be so enormous (whether or not the case is meritorious), that the defense and/or settlement of such litigation is often beyond the personal resources of directors and officers.
4.The Company believes that it is unfair for its directors and officers to assume the risk of huge judgments and other expenses which may occur in cases in which the director or officer received no personal profit and in cases where the director or officer was not culpable.
5.The Company, after reasonable investigation, believes that the interests of the Company and its stockholders would best be served by a combination of insurance and the indemnification by the Company of the directors and officers of the Company.
6.Section 145 of the DGCL (“Section 145”), under which the Company is organized, empowers the Company to indemnify its officers, directors, employees and agents by agreement and to indemnify persons who serve, at the request of the Company, as the directors, officers, employees or agents of other corporations or enterprises, and expressly provides that the indemnification provided by Section 145 is not exclusive.
7.Section 102(b)(7) of the DGCL allows a corporation to include in its certificate of incorporation a provision limiting or eliminating the personal liability of a director or officer for monetary damages in respect of claims by stockholders and corporations for breach of certain fiduciary duties, and the Company has so provided in its Certificate of Incorporation, as amended, that each director and officer shall be exculpated from such liability to the maximum extent permitted by law.
8.The Board of Directors has determined that contractual indemnification as set forth herein is not only reasonable and prudent but also promotes the best interests of the Company and its stockholders.
9.The Company desires and has requested Indemnitee to serve or continue to serve as a director or officer of the Company and/or one or more subsidiaries of the Company free from undue concern for unwarranted claims for damages arising out of or related to such services to the Company and/or one or more subsidiaries of the Company.
10.Indemnitee is willing to serve, continue to serve or to provide additional service for or on behalf of the Company and/or one or more subsidiaries of the Company on the condition that Indemnitee is furnished the indemnity provided for herein.
Agreement
1.Right to Indemnification. To the fullest extent permitted by the laws of the State of Delaware:
(a)The Company shall indemnify Indemnitee if Indemnitee was or is a party or is threatened to be made a party to any threatened, pending or completed proceeding (including any investigations) by reason of the fact that Indemnitee is or was or has agreed to serve at the request of the Company as a director, officer, employee or agent (which for purposes hereof, shall include a trustee, partner or manager or similar capacity) of the Company, or while serving as a director or officer of the Company, is or was serving or has agreed to serve at the request of the Company as a director, officer, employee or agent (which, for purposes hereof, shall include a trustee, partner or manager or similar capacity) of another corporation, partnership, joint venture, trust, employee benefit plan or other enterprise, or by reason of any action alleged to have been taken or omitted in such capacity. For the avoidance of doubt, the foregoing indemnification obligation includes, without limitation, claims for monetary damages against Indemnitee in respect of an alleged breach of fiduciary duties, to the fullest extent permitted under Section 102(b)(7) of the DGCL as in existence on the date hereof.
(b)The indemnification provided by this Section 1 shall be from and against expenses (including attorneys’ fees), judgments, fines and amounts paid in settlement actually and reasonably incurred by Indemnitee or on Indemnitee’s behalf in connection with such proceeding and any appeal therefrom, but shall only be provided if Indemnitee acted in good faith and in a manner Indemnitee reasonably believed to be in or not opposed to the best interests
2
of the Company, and, with respect to any criminal proceeding, had no reasonable cause to believe Indemnitee’s conduct was unlawful.
(c)Notwithstanding the foregoing provisions of this Section 1, in the case of any threatened, pending or completed action or suit by or in the right of the Company to procure a judgment in its favor by reason of the fact that Indemnitee is or was a director, officer, employee or agent of the Company, or while serving as a director or officer of the Company, is or was serving or has agreed to serve at the request of the Company as a director, officer, employee or agent of another corporation, partnership, joint venture, trust, employee benefit plan or other enterprise, Indemnitee shall be entitled to the rights of indemnification provided for herein in connection with such action or suit if the Indemnitee acted in good faith and in a manner the Indemnitee reasonably believed to be in or not opposed to the best interests of the Company; provided, however, if applicable law so provides, no indemnification shall be made in respect of any such claim, issue or matter as to which Indemnitee shall have been finally adjudged to be liable to the Company unless, and only to the extent that, the Delaware Court of Chancery or the court in which such action or suit was brought shall determine upon application that, despite the adjudication of liability but in view of all the circumstances of the case, Indemnitee is fairly and reasonably entitled to indemnity for such expenses which the Delaware Court of Chancery or such other court shall deem proper.
(d)The termination of any proceeding by judgment, order, settlement, conviction, or upon a plea of nolo contendere or its equivalent, shall not create a presumption that Indemnitee did not act in good faith and in a manner which Indemnitee reasonably believed to be in or not opposed to the best interests of the Company, and, with respect to any criminal action or proceeding, had reasonable cause to believe that Indemnitee’s conduct was unlawful. In addition, neither the failure of the party making the determination as specified in Section 3 below (the “reviewing party”) to have made a determination as to whether Indemnitee has met any particular standard of conduct or had any particular belief, nor an actual determination by the reviewing party that Indemnitee has not met such standard of conduct or did not have such belief, prior to the commencement of legal proceedings by Indemnitee to secure a judicial determination that Indemnitee should be indemnified under applicable law, shall be a defense in such legal proceedings to Indemnitee’s claim or create a presumption that Indemnitee has not met any particular standard of conduct or did not have any particular belief. In connection with any determination by the reviewing party or otherwise as to whether Indemnitee is entitled to be indemnified hereunder, the burden of proof shall be on the Company to establish by clear and convincing evidence that Indemnitee is not so entitled.
(e)The indemnification and contribution provided for herein will remain in full force and effect regardless of any investigation made by or on behalf of Indemnitee or any officer, director, employee, agent or controlling person of Indemnitee.
3
2.Successful Defense: Partial Indemnification.
(a)To the extent that Indemnitee has been successful on the merits or otherwise in defense of any proceeding referred to in Section 1 hereof or in defense of any claim, issue or matter therein, Indemnitee shall be indemnified against expenses (including attorneys’ fees) actually and reasonably incurred in connection therewith. For purposes of this Agreement and without limiting the foregoing, if any proceeding is disposed of, on the merits or otherwise (including a disposition without prejudice), without:
(1)the disposition being adverse to Indemnitee;
(2)an adjudication that Indemnitee was liable to the Company;
(3)a plea of guilty or nolo contendere by Indemnitee;
(4)an adjudication that Indemnitee did not act in good faith and in a manner Indemnitee reasonably believed to be in or not opposed to the best interests of the Company; and
(5)with respect to any criminal proceeding, an adjudication that Indemnitee had reasonable cause to believe Indemnitee’s conduct was unlawful,
Indemnitee shall be considered for the purposes hereof to have been wholly successful with respect thereto.
(b)If Indemnitee is entitled under any provision of this Agreement to indemnification by the Company for some or a portion of the expenses (including attorneys’ fees), judgments, fines or amounts paid in settlement actually and reasonably incurred by Indemnitee or on Indemnitee’s behalf in connection with any proceeding, or in defense of any claim, issue or matter therein, and any appeal therefrom but not, however, for the total amount thereof, the Company shall nevertheless indemnify Indemnitee for the portion of such expenses (including attorneys’ fees), judgments, fines or amounts paid in settlement to which Indemnitee is entitled.
3.Determination That Indemnification Is Proper. Any indemnification hereunder shall (unless otherwise ordered by a court) be made by the Company unless a determination is made that indemnification of such person is not proper in the circumstances because he or she has not met the applicable standard of conduct set forth in Section 1(b) hereof. Any such determination shall be made:
(1)by a majority vote of the directors who are not parties to the proceeding in question (“disinterested directors”), even if less than a quorum;
(2)by a majority vote of a committee of disinterested directors designated by majority vote of disinterested directors, even if less than a quorum;
4
(3)by a majority vote of a quorum of the outstanding shares of stock of all classes entitled to vote on the matter, voting as a single class, which quorum shall consist of stockholders who are not at that time parties to the proceeding in question;
(4)by independent legal counsel; or
(5)by a court of competent jurisdiction.
4.Advance Payment of Expenses: Notification and Defense of Claim.
(a)Expenses (including attorneys’ fees) incurred by Indemnitee in defending a threatened or pending proceeding, or in connection with an enforcement action pursuant to Section 5(b) or Section 7(b), shall be paid by the Company in advance of the final disposition of such proceeding within twenty (20) days after receipt by the Company of (i) a statement or statements from Indemnitee requesting such advance or advances from time to time, and (ii) an undertaking by or on behalf of Indemnitee to repay such amount or amounts, only if, and to the extent that, it shall ultimately be determined that Indemnitee is not entitled to be indemnified by the Company as authorized by this Agreement or otherwise. Such undertaking shall be accepted without reference to the financial ability of Indemnitee to make such repayment. Advances shall be unsecured and interest-free.
(b)Within thirty (30) days after receipt by Indemnitee of notice of the commencement of any proceeding, Indemnitee shall, if a claim thereof is to be made against the Company hereunder, notify the Company of the commencement thereof. The failure to timely notify the Company of the commencement of the proceeding, or Indemnitee’s request for indemnification, will not relieve the Company from any liability that it may have to Indemnitee hereunder, except to the extent the Company is prejudiced in its defense of such proceeding as a result of such failure.
(c)If the Company shall be obligated to pay the expenses of Indemnitee with respect to any proceeding, as provided in this Agreement, the Company, if appropriate, shall be entitled to assume the defense of such proceeding, with counsel reasonably acceptable to Indemnitee, upon the delivery to Indemnitee of written notice of its election to do so. After delivery of such notice, approval of such counsel by Indemnitee and the retention of such counsel by the Company, the Company will not be liable to Indemnitee under this Agreement for any fees of counsel subsequently incurred by Indemnitee with respect to the same proceeding, provided that:
(1)Indemnitee shall have the right to employ Indemnitee’s own counsel in such proceeding at Indemnitee’s expense; and
(2)if (A) the employment of counsel by Indemnitee has been previously authorized in writing by the Company, (B) counsel to the Company or Indemnitee shall have reasonably concluded that there may be a conflict of
5
interest or position, or reasonably believes that a conflict is likely to arise, on any significant issue between the Company and Indemnitee in the conduct of any such defense or (C) the Company shall not, in fact, have employed counsel to assume the defense of such proceeding, then (in each case) the fees and expenses of Indemnitee’s counsel shall be at the expense of the Company, except as otherwise expressly provided by this Agreement.
The Company shall not be entitled, without the consent of Indemnitee, to assume the defense of any claim brought by or in the right of the Company or as to which counsel for the Company or Indemnitee shall have reasonably made the conclusion provided for in clause (B) above.
(d)Notwithstanding any other provision of this Agreement to the contrary, to the extent that Indemnitee is, by reason of Indemnitee’s corporate status with respect to the Company or any corporation, partnership, joint venture, trust, employee benefit plan or other enterprise which Indemnitee is or was serving or has agreed to serve at the request of the Company, a witness or otherwise participates in any proceeding at a time when Indemnitee is not a party in the proceeding, the Company shall indemnify Indemnitee against all expenses (including attorneys’ fees) actually and reasonably incurred by Indemnitee or on Indemnitee’s behalf in connection therewith.
5.Procedure for Indemnification.
(a)To obtain indemnification, Indemnitee shall promptly submit to the Company a written request, including therein or therewith such documentation and information as is reasonably available to Indemnitee and is reasonably necessary to determine whether and to what extent Indemnitee is entitled to indemnification. The Company shall, promptly upon receipt of such a request for indemnification, advise the Board of Directors in writing that Indemnitee has requested indemnification.
(b)The Company’s determination whether to grant Indemnitee’s indemnification request shall be made promptly, and in any event within 45 days following receipt of a request for indemnification pursuant to Section 5(a). The right to indemnification as granted by Section 1 of this Agreement shall be enforceable by Indemnitee in any court of competent jurisdiction if the Company denies such request, in whole or in part, or fails to respond within such 45-day period. It shall be a defense to any such action (other than an action brought to enforce a claim for the advance of costs, charges and expenses under Section 4 hereof where the required undertaking, if any, has been received by the Company) that Indemnitee has not met the standard of conduct set forth in Section 1 hereof, but the burden of proving such defense by clear and convincing evidence shall be on the Company. Neither the failure of the Company (including its Board of Directors or one of its committees, its independent legal counsel, and its stockholders) to have made a determination prior to the commencement of such action that indemnification of Indemnitee is proper in the circumstances because Indemnitee has met the applicable standard of conduct set forth in Section 1 hereof, nor the fact that there has been an actual determination by the Company (including its Board of Directors or one of its
6
committees, its independent legal counsel, and its stockholders) that Indemnitee has not met such applicable standard of conduct, shall be a defense to the action or create a presumption that Indemnitee has or has not met the applicable standard of conduct. The Indemnitee’s expenses (including attorneys’ fees) incurred in connection with successfully establishing Indemnitee’s right to indemnification, in whole or in part, in any such proceeding or otherwise shall also be indemnified by the Company.
(c)The Indemnitee shall be presumed to be entitled to indemnification under this Agreement upon submission of a request for indemnification pursuant to this Section 5, and the Company shall have the burden of proof in overcoming that presumption in reaching a determination contrary to that presumption. Such presumption shall be used as a basis for a determination of entitlement to indemnification unless the Company overcomes such presumption by clear and convincing evidence.
6.Insurance and Subrogation.
(a)The Company shall purchase and maintain insurance in reasonable amounts from established and reputable insurers on behalf of Indemnitee (which shall include so called “tail” coverage) who is or was or has agreed to serve at the request of the Company as a director or officer of the Company, or is or was serving at the request of the Company as a director, officer, employee or agent of another corporation, partnership, joint venture, trust, employee benefit plan or other enterprise against any liability asserted against, and incurred by, Indemnitee or on Indemnitee’s behalf in any such capacity, or arising out of Indemnitee’s status as such, whether or not the Company would have the power to indemnify Indemnitee against such liability under the provisions of this Agreement. If the Company has such insurance in effect at the time the Company receives from Indemnitee any notice of the commencement of a proceeding, the Company shall give prompt notice of the commencement of such proceeding to the insurers in accordance with the procedures set forth in the policy. The Company shall thereafter take all necessary or desirable action to cause such insurers to pay, on behalf of the Indemnitee, all amounts payable as a result of such proceeding in accordance with the terms of such policy.
(b)In the event of any payment by the Company under this Agreement, the Company shall be subrogated to the extent of such payment to all of the rights of recovery of Indemnitee with respect to any insurance policy, who shall execute all papers required and take all action necessary to secure such rights, including execution of such documents as are necessary to enable the Company to bring suit to enforce such rights in accordance with the terms of such insurance policy. The Company shall pay or reimburse all expenses actually and reasonably incurred by Indemnitee in connection with such subrogation.
(c)The Company shall not be liable under this Agreement to make any payment of amounts otherwise indemnifiable hereunder (including, but not limited to, judgments, fines, ERISA excise taxes or penalties, and amounts paid in settlement) if and to the
7
extent that Indemnitee has otherwise actually received such payment under this Agreement or any insurance policy, contract, agreement or otherwise.
7.Limitation on Indemnification. Notwithstanding any other provision herein to the contrary, the Company shall not be obligated pursuant to this Agreement:
(a)Claims Initiated by Indemnitee. To indemnify or advance expenses to Indemnitee with respect to any proceeding (or part thereof) initiated by Indemnitee, except with respect to a proceeding brought to establish or enforce a right to indemnification (which shall be governed by the provisions of Section 7(b) of this Agreement), unless such proceeding (or part thereof) was authorized or consented to by the Board of Directors of the Company.
(b)Action for Indemnification. To indemnify Indemnitee for any expenses incurred by Indemnitee with respect to any proceeding instituted by Indemnitee to enforce or interpret this Agreement, unless Indemnitee is successful in establishing Indemnitee’s right to indemnification in such proceeding, in whole or in part, or unless and to the extent that the court in such proceeding shall determine that, despite Indemnitee’s failure to establish their right to indemnification, Indemnitee is entitled to indemnity for such expenses; provided, however, that nothing in this Section 7(b) is intended to limit the Company’s obligation with respect to the advancement of expenses to Indemnitee in connection with any such proceeding instituted by Indemnitee to enforce or interpret this Agreement, as provided in Section 4 hereof.
(c)Section 16 Violations. To indemnify Indemnitee on account of any proceeding with respect to which final judgment is rendered against Indemnitee for payment or an accounting of profits arising from the purchase or sale by Indemnitee of securities in violation of Section 16(b) of the Securities Exchange Act of 1934, as amended, or any similar successor statute.
(d)Certain Settlement Provisions. To indemnify Indemnitee for amounts paid in settlement of any proceeding without the Company’s prior written consent, which shall not be unreasonably withheld. The Company shall not settle any proceeding in any manner that would impose any fine or other obligation on Indemnitee without Indemnitee’s prior written consent, which shall not be unreasonably withheld.
8.Contribution. In order to provide for just and equitable contribution in circumstances in which the indemnification provided for herein is held by a court of competent jurisdiction to be unavailable to Indemnitee in whole or in part, it is agreed that, in such event, the Company shall (whether or not it is jointly liable with Indemnitee or would be joined in any proceeding), to the fullest extent permitted by law, contribute to the payment of Indemnitee’s costs, charges and expenses (including attorneys’ fees), judgments, fines and amounts paid in settlement with respect to any proceeding, whether civil, criminal, administrative or investigative, in an amount that is just and equitable in the circumstances, taking into account, among other things, contributions by other directors and officers of the Company or others pursuant to indemnification agreements or otherwise; provided, that, without limiting the
8
generality of the foregoing, such contribution shall not be required where such holding by the court is due to (i) the failure of Indemnitee to meet the standard of conduct set forth in Section 1 hereof, or (ii) any limitation on indemnification set forth in Section 6(c) or 7 hereof.
9.Non-Exclusivity. The provisions for indemnification and advancement of expenses set forth in this Agreement shall not be deemed exclusive of any other rights which Indemnitee may have under any provision of law, the Company’s Certificate of Incorporation or Bylaws, in any court in which a proceeding is brought, the vote of the Company’s stockholders or disinterested directors, other agreements or otherwise, and Indemnitee’s rights hereunder shall continue after Indemnitee has ceased acting as an agent of the Company and shall inure to the benefit of the heirs, executors and administrators of Indemnitee. However, no amendment or alteration of the Company’s Certificate of Incorporation or Bylaws or any other agreement shall adversely affect the rights provided to Indemnitee under this Agreement.
10.Enforcement. The Company shall be precluded from asserting in any judicial proceeding that the procedures and presumptions of this Agreement are not valid, binding and enforceable. The Company agrees that its execution of this Agreement shall constitute a stipulation by which it shall be irrevocably bound in any court of competent jurisdiction in which a proceeding by Indemnitee for enforcement of his rights hereunder shall have been commenced, continued or appealed, that its obligations set forth in this Agreement are unique and special, and that failure of the Company to comply with the provisions of this Agreement will cause irreparable and irremediable injury to Indemnitee, for which a remedy at law will be inadequate. As a result, in addition to any other right or remedy Indemnitee may have at law or in equity with respect to breach of this Agreement, Indemnitee shall be entitled to injunctive or mandatory relief directing specific performance by the Company of its obligations under this Agreement.
11.Interpretation of Agreement.
(a)It is understood that the parties hereto intend this Agreement to be interpreted and enforced so as to provide indemnification to Indemnitee to the fullest extent now or hereafter permitted by law, including in those circumstances in which indemnification would otherwise be discretionary.
(b)If the DGCL is amended after adoption of this Agreement to expand further the indemnification permitted to directors or officers, then the Company shall indemnify Indemnitee to the fullest extent permitted by the DGCL, as so amended.
12.No Employment Rights. Nothing in this Agreement is intended to create in Indemnitee any right to employment or continued employment.
13.Survival of Rights.
(a)All agreements and obligations of the Company contained herein shall continue during the period Indemnitee is a director, officer, employee or agent of the Company and shall continue thereafter so long as Indemnitee shall be subject to any possible claim or
9
threatened, pending or completed proceeding by reason of the fact that Indemnitee was serving in the capacity referred to herein.
(b)The Company shall require any successor to the Company (whether direct or indirect, by purchase, merger, consolidation or otherwise) or to all, substantially all or a substantial part of the business and/or assets of the Company, by written agreement in form and substance satisfactory to Indemnitee, expressly to assume and agree to perform this Agreement in the same manner and to the same extent that the Company would be required to perform if no such succession had taken place.
(c)All of the terms and provisions of this Agreement shall be binding upon, shall inure to the benefit of and shall be enforceable by the parties hereto and their respective successors (including any direct or indirect successor by purchase, merger, consolidation or otherwise to all or substantially all of the business or assets of the Company), assigns, heirs, executors, administrators and legal representatives.
14.Savings Clause. If any provision or provisions of this Agreement shall be invalidated on any ground by any court of competent jurisdiction, then the Company shall nevertheless indemnify Indemnitee as to costs, charges and expenses (including attorneys’ fees), judgments, fines and amounts paid in settlement with respect to any proceeding, including an action by or in the right of the Company, to the full extent permitted by any applicable portion of this Agreement that shall not have been invalidated and to the full extent permitted by applicable law.
15.Certain Definitions. For purposes of this Agreement, the following definitions shall apply:
(a)The term “by reason of the fact that Indemnitee is or was a director, officer, employee or agent of the Company, or while serving as a director or officer of the Company, is or was serving or has agreed to serve at the request of the Company as a director, officer employee or agent of another corporation, partnership, joint venture, trust, employee benefit plan or other enterprise” shall be broadly construed and shall include, without limitation, any actual or alleged act or omission to act.
(b)The term “Company” shall include, without limitation and in addition to the resulting corporation, any constituent corporation (including any constituent of a constituent) absorbed in a consolidation or merger which, if its separate existence had continued, would have had power and authority to indemnify its directors, officers, and employees or agents, so that any person who is or was a director, officer, employee or agent of such constituent corporation, or is or was serving at the request of such constituent corporation as a director, officer, employee or agent of another corporation, partnership, joint venture, trust, employee benefit plan or other enterprise, shall stand in the same position under the provisions of this Agreement with respect to the resulting or surviving corporation as he or she would have with respect to such constituent corporation if its separate existence had continued.
10
(c)The term “expenses” shall be broadly and reasonably construed and shall include, without limitation, all direct and indirect costs of any type or nature whatsoever (including, without limitation, all attorneys’ fees and related disbursements, appeal bonds, other out-of-pocket costs and reasonable compensation for time spent by Indemnitee for which Indemnitee is not otherwise compensated by the Company or any third party, provided that the rate of compensation and estimated time involved is approved by the Board of Directors, which approval shall not be unreasonably withheld), actually and reasonably incurred by Indemnitee in connection with either the investigation, defense or appeal of a proceeding or establishing or enforcing a right to indemnification under this Agreement, Section 145 or otherwise.
(d)The term “independent legal counsel” shall mean an attorney or firm of attorneys, who shall not have otherwise performed services for the Company or any Indemnitee within the last five years (other than with respect to matters concerning the right of any Indemnitee under this Agreement, or of other indemnitees under similar indemnity agreements). Any such independent legal counsel shall be selected by the Board of Directors, unless the Board of Directors shall request that the Indemnitee shall make such selection. The party selecting the independent legal counsel shall promptly provide written notice to the other party of its selection. Within 10 days after receipt of such written notice, Indemnitee or the Company, as the case may be, may, deliver to the Company or the Indemnitee, as the case may be, a written objection to such selection; provided, however, that such objection may be asserted only on the ground that the independent legal counsel so selected does not meet the requirements hereof.
(e)The term “judgments, fines and amounts paid in settlement” shall be broadly construed and shall include, without limitation, all direct and indirect payments of any type or nature whatsoever (including, without limitation, all penalties and amounts required to be forfeited or reimbursed to the Company, as well as any penalties or excise taxes assessed on a person with respect to an employee benefit plan).
(f)The term “not opposed to the best interests of the Company” shall include, without limitation, action taken by a person in good faith and in a manner such person reasonably believed to be in the interest of the participants and beneficiaries of an employee benefit plan.
(g)The term “other enterprises” shall include, without limitation, employee benefit plans.
(h)The term “proceeding” shall be broadly construed and shall include, without limitation, the investigation, preparation, prosecution, defense, settlement, arbitration and appeal of, and the giving of testimony in, any threatened, pending or completed claim, action, suit or proceeding, whether civil, criminal, administrative or investigative.
(i)The term “serving at the request of the Company” shall include, without limitation, any service as a director, officer, employee or agent of the Company which imposes duties on, or involves services by, such director, officer, employee or agent with respect to an employee benefit plan, its participants or beneficiaries.
11
16.Notices. Any notice, request or other communication required or permitted to be given to the parties under this Agreement shall be in writing and either delivered in person or sent by telecopy, telex, telegram, overnight mail or courier service, or certified or registered mail, return receipt requested, postage prepaid, to the parties at the following addresses (or at such other addresses for a party as shall be specified by like notice):
If to the Company:
11800 Ridge Parkway, Suite 300
Broomfield, Colorado 80021
Attn: Deputy General Counsel
[]
Attn: Deputy General Counsel
[]
If to Indemnitee: to the address on file with the Company
17.Entire Agreement. This Agreement and the documents expressly referred to herein constitute the entire agreement between the parties hereto with respect to the matters covered hereby, and any other prior or contemporaneous oral or written understandings or agreements between Indemnitee and the Company or its predecessors with respect to the matters covered hereby are expressly superseded by this Agreement.
18.Modification and Waiver. No supplement, modification or amendment of this Agreement shall be binding unless executed in writing by both of the parties hereto. No waiver of any of the provisions of this Agreement shall be deemed or shall constitute a waiver of any other provision hereof (whether or not similar) nor shall such waiver constitute a continuing waiver.
19.Governing Law. This Agreement shall be governed exclusively by and construed according to the laws of the State of Delaware, as applied to contracts between Delaware residents entered into and to be performed entirely within Delaware. If a court of competent jurisdiction shall make a final determination that the provisions of the law of any state other than Delaware govern indemnification by the Company of its officers and directors, then the indemnification provided under this Agreement shall in all instances be enforceable to the fullest extent permitted under such law, notwithstanding any provision of this Agreement to the contrary.
20.Counterparts. This Agreement may be executed in two or more counterparts, each of which shall be deemed to be an original and all of which together shall be deemed to be one and the same instrument, notwithstanding that both parties are not signatories to the original or same counterpart.
12
21.Headings. The section and subsection headings contained in this Agreement are for reference purposes only and shall not affect in any way the meaning or interpretation of this Agreement.
IN WITNESS WHEREOF, this Agreement has been duly executed and delivered to be effective as of the date first above written.
DMC GLOBAL INC.
| By: | |||||
| James O'Leary | |||||
| President and Chief Executive Officer | |||||
| INDEMNITEE: | |||||
| [__________________] | |||||
13
EXHIBIT 4.1
DESCRIPTION OF CAPITAL STOCK
The following description summarizes the material terms of our capital stock and provisions of our Amended and Restated Certificate of Incorporation, as amended (the “Certificate”), and Amended and Restated Bylaws (the “Bylaws”). Because this is only a summary, it does not contain all of the information that may be important to you. For a complete description, you should refer to the Certificate, the Bylaws, the applicable provisions of the Delaware General Corporation Law, and the Stockholder Protection Rights Agreement, dated as of June 5, 2024, between us and Computershare Trust Company, N.A., as Rights Agent (the “Rights Agreement”), as amended by Amendment No. 1 to Stockholder Protection Rights Agreement, dated as of May 30, 2025 (the "Amendment"). The Certificate, the Bylaws, the Rights Agreement and the Amendment are filed as exhibits to our most recent Annual Report on Form 10-K and are incorporated by reference herein.
Our authorized capital stock consists of 50,000,000 shares of common stock, par value $0.05 per share, and 4,000,000 shares of preferred stock, par value $0.05 per share.
Common Stock
Holders of shares of our common stock are entitled to one vote per share on all matters to be voted on by stockholders. The holders of our common stock are entitled to receive such dividends, if any, as may be declared from time to time by our board of directors out of funds legally available therefor. Upon our liquidation or dissolution, the holders of our common stock are entitled to share ratably in the distribution of assets, subject to the rights of the holders of shares of preferred stock, if any. Holders of our common stock have no preemptive rights, subscription rights or conversion rights. There are no redemption or sinking fund provisions with respect to the common stock.
Preferred Stock
The Certificate authorizes our board of directors to establish one or more series of preferred stock and to determine, with respect to any series of preferred stock, the terms and rights of the series, including dividend rights, conversion rights, exchange rights, terms of redemption, redemption price or prices, liquidation preferences, the number of shares constituting any series and the designation of such series. The rights of the holders of common stock will be subject to, and may be adversely affected by, the rights of the holders of any preferred stock issued by us.
Purposes and Effects of Certain Provisions of the Certificate and Bylaws
General
The Certificate and the Bylaws contain provisions that could make more difficult the acquisition of control of our company by means of a tender offer, open market purchases, a proxy contest or otherwise. A description of these provisions is set forth below.
Preferred Stock
We believe that the availability of the preferred stock under the Certificate will provide us with flexibility in structuring possible future financings and acquisitions and in meeting other corporate needs which might arise. Having these authorized shares available for issuance will allow us to issue shares of preferred stock without the expense and delay of a special stockholders’ meeting. The authorized shares of preferred stock, as well as shares of common stock, will be available for issuance without further action by our stockholders, unless action is required by
applicable law or the rules of any stock exchange on which our securities may be listed. Our board of directors has the power, subject to applicable law, to issue series of preferred stock that could, depending on the terms of the series, impede the completion of a merger, tender offer or other takeover attempt. Our board of directors will make any determination to issue shares based on its judgment as to our and our stockholders’ best interests. In so acting, our board of directors could issue preferred stock having terms which could discourage an acquisition attempt or other transaction that some, or a majority, of the stockholders might believe to be in their best interests or in which stockholders might receive a premium for their stock over the then prevailing market price of the stock.
Stockholder Action and Voting Provisions
The Certificate (i) does not permit stockholders to act by written consent, (ii) permits our board of directors to amend the Bylaws and requires that amendments to the Bylaws approved by stockholders receive the approval of holders of two-thirds of all voting securities then outstanding and (iii) generally prohibits our stockholders from filling any vacancies that arise on our board of directors. In addition, an amendment to these provisions would require the approval of holders of two-thirds of all voting securities then outstanding. Further, the Bylaws impose certain notice requirements on stockholders seeking to propose nominees for our board of directors or other business to be conducted at a stockholders’ meeting.
Limitation of Director and Officer Liability
The Certificate and the Bylaws contain provisions that (i) limit the liability of our directors and officers with respect to the performance of their duties to us and (ii) generally require us to indemnify and advance expenses to our directors and officers in connection with legal proceedings associated with such duties, in each case to the extent permitted by Delaware law. These provisions may have the effect of reducing the likelihood of derivative litigation against our directors and officers and may discourage or deter stockholders or management from bringing a lawsuit against our directors or officers for breach of their duty of care, even though such an action, if successful, might otherwise have benefited our company and its stockholders. These provisions do not limit or affect a stockholder’s ability to seek and obtain relief under federal securities laws.
Special Meetings of Stockholders
The Bylaws provide that special meetings of stockholders may be called only by our board of directors, the chairman of the board of directors, and our Chief Executive Officer.
Stockholder Protection Rights Agreement
On June 5, 2024, we entered into the Rights Agreement, pursuant to which our board of directors declared a dividend of one right (“Right”) for each share of our common stock outstanding at the close of business on June 17, 2024. One Right will also be issued together with each share of common stock issued by our company after that date, but before the Separation Time (as defined in the Rights Agreement). Each Right initially represents the right to purchase one one-thousandth of a share of Series B Participating Preferred Stock for $75.00, subject to adjustment and upon such terms and subject to the conditions set forth in the Rights Agreement. Rights will generally become exercisable only if any person (or any persons acting as a group) acquires “Beneficial Ownership” (as defined in the Rights Agreement) of 10%, or 20% in the case of certain passive investors, or more of our outstanding common stock. If Rights become exercisable, all holders of Rights (other than the person, entity or group triggering the Rights Agreement, whose rights will become void and will not be exercisable) will have the right to purchase from our company for $75.00, subject to certain potential adjustments, shares of our common stock having a market value of twice that amount.
On May 30, 2025, we entered into the Amendment to extend the expiration time of the Rights for one year from June 4, 2025 to June 4, 2026 (unless the Rights are earlier redeemed, exchanged or terminated in accordance
with the terms and conditions of the Rights Agreement, as amended). Except for the extension of the expiration time, the Rights Agreement remains unaltered and in full force and effect.
EXHIBIT 10.43
Appendices omitted pursuant to Item 601(a)(5) of Regulation S-K and will be furnished to the SEC upon request.
| COMMERCIAL - LEASE AGREEMENT | ||||||||
| Between | ||||||||
| DynITEC GmbH | ||||||||
| Kaiserstr. 3, 53840 Troisdorf | ||||||||
represented by the managing directors Mr. Christian Nimtz and Dr. Lasse Jürgensen | ||||||||
| (HRB 6493 Siegburg Local Court) | ||||||||
| VAT / Sales Tax ID: DE 813482988 | ||||||||
as lessor - | ||||||||
| and | ||||||||
| DynaEnergetics Europe GmbH | ||||||||
| Kaiserstr. 3, 53840 Troisdorf | ||||||||
| represented by the managing directors Mr. Ian Grieves and Mr. Achim Pabst | ||||||||
| (HRB 6271 Siegburg Local Court) | ||||||||
| VAT / Sales tax ID: DE 283853226 | ||||||||
as tenant - | ||||||||
Preamble
This lease agreement was individually negotiated between the contracting parties after several rounds of negotiations. The provisions of the lease agreement are therefore the result of specific agreements and do not constitute pre-formulated general terms and conditions. Both parties confirm that they have jointly developed and mutually agreed upon the contents of the agreement.
This lease agreement covers various rental spaces with existing buildings and infrastructure facilities at the location at
Kaiserstr. 3, 53840 Troisdorf.
The leased property consists of parts of a contiguous area formerly owned by the chemical and armaments company Dynamit Nobel AG, which has a 140-year history at this location.
The entire site is divided into a secured area and a non-secured area.
As a result of a division among various companies in 2000, the entire site has a large number of dependencies and close interconnections within the entire property , , for example in Reference to Media development, Supply and disposal lines, rights of use, easements, developments, fire brigade access road, etc.
The landlord uses and operates parts of the total area and buildings as a manufacturing company (industrial enterprise) for the production and processing of explosives (DynITEC = producer and landlord). The landlord itself has leased the total area from Dynamit Nobel GmbH (main lease agreement). The following lease agreement regulates
1
a sublease relationship with the tenant DynaEnergetics Europe GmbH. The landlord hereby confirms that it has the permission of Dynamit Nobel GmbH to conclude this sublease agreement.
The tenant also uses and operates parts of the total area and buildings as a manufacturing company (industrial enterprise) for the production and processing of explosives (DynaEnergetics = producer and tenant).
This lease agreement (a so-called triple net lease agreement) is concluded for the transfer of the partial areas and buildings on the entire site and thus for the tenant to have access to the contiguous production site (entire site), including the possibility of using the contiguous infrastructure.
For operational purposes, special official requirements and conditions for a high-risk facility must be met, and the relevant official permits and approvals are required. In this context, a permit holder company, Troisdorfer Genehmigungshaltergesellschaft mbH ("TGHG"), was established for the entire site.
TGHG acts as the operator of the explosives facility at the Troisdorf site in accordance with the Federal Immission Control Act (BImSchG) and is the holder of the public law permits granted for the site, resulting from legal provisions such as the BImSchG, SprengG, WHG, KrW-/AbfG, GSG, ArbSchG, and ChemG. Its task is to fulfill all public law obligations relating to the facilities located on the premises and to ensure operational safety at the site through uniform safety management.
The tenant is a shareholder of TGHG as a producer operating at the site. The landlord is also a shareholder. Other shareholders of TGHG are the property owners at the site, currently DD Immobilien Troisdorf GmbH and Dynamite Nobel GmbH.
With this in mind, the contracting parties agree as follows:
§ 1 OBJECT OF THE LEASE
DynITEC sublets to DynaEnergetics the premises shown in the site plan
[Appendix 1A]
and in the building list
[Appendix 1B]
, some of which are also located outside the areas marked in [color].
The rental areas listed in [Appendix 1A] and [Appendix 1B] together constitute the rental property.
The tenant is aware of all dependencies on the entire site, so a separate list is not provided.
No specific floor space measurements or property size are assured or guaranteed. The parties agree that any deviations from the floor space measurements specified in the contract shall not give rise to any claims for rent adjustments, damages, or termination against the other party. The rental property is rented empty, without any inventory, operating equipment, or lighting fixtures.
2
§ 2 CONDITION AND DATE OF HANDOVER
The tenant is familiar with the rental property due to her many years of activity at the location and her position as a shareholder in TGHG. She rents the rental property in its current condition, as viewed and seen. Any defects or special features are known to the tenant and were taken into account during the viewing.
For documentation of the condition at the time of handover, reference is made to the photo documentation prepared by the expert office Wüest & Partner on November 20, 2025. This is part of the lease agreement and was handed over to the tenant for inspection and is attached as Appendix 3.
The condition of the rental property shall be recorded in a handover report to be signed by both parties shortly after the start of the rental period. This handover report shall automatically become part of this rental agreement upon signature by both parties, without the need to attach it to the agreement. If one party fails to appear, it shall accept the condition of the rental property as documented by the other party.
§ 3 PURPOSE OF RENTAL/USE; APPROVALS
1.The rental of the rental property is exclusively for the purpose of the producer's existing and ongoing industrial business operations, in particular the development and manufacture of explosives.
2.The tenant is responsible and liable, at its own expense, for obtaining and maintaining all official permits of any kind that are necessary for its business operations. This includes all building permits, including fire protection, structural engineering, and drainage, as well as permits under immission control law and comparable legal regulations. If the necessary permits are obtained indirectly by TGHG, the tenant is also responsible for compliance with them.
3.The tenant warrants that the rental property will be used exclusively for the purpose of generating sales that are subject to sales tax and thus do not exclude the landlord from deducting input tax, and that the landlord is able to opt for sales tax when renting out the property.
and that the lessor is able to opt for VAT when renting.
4.The tenant shall assume full and sole responsibility for the rental property, to the extent permitted by law. The tenant shall indemnify the landlord upon first request against all obligations (including obligations under public law), costs, and damages arising in connection with its activities or business operations.
§ 4 RENTAL PERIOD, TERMINATION
1.The rental period under this agreement shall commence on January 1, 2026, at 12:00 a.m. and shall be fixed for a term of 10 years until December 31, 2036. The lessor hereby confirms that it has also concluded the main rental agreement with the property owner for a fixed term until December 31, 2036. The lease agreement between the property owner and the tenant for parts of the leased property, including any additional agreements and side agreements, shall be terminated with effect from 31 December 2025, 24:00.
2.After the lease term expires in accordance with clause 1, the lessee has the right to extend the lease term twice, each time for a period of 5 years. The option must be
3
exercised by means of a written declaration no later than 30 months before the lease term expires, i.e.
-by June 30, 2034 for an extension until December 31, 2041 (otherwise the lease shall end on December 31, 2036) and
-by June 30, 2039, for an extension until December 31, 2046 (otherwise, the lease will end on December 31, 2041).
The option right does not apply if the landlord does not exercise its option right to extend the main lease agreement. The landlord shall notify the tenant of its non-exercise of its option no later than 36 months before the end of the lease term.
3.The lessor may terminate the lease agreement with immediate effect without observing a notice period for good cause and prohibit the use of the leased property, in particular if
a)the tenant is in arrears with the payment of rent or ancillary costs for two consecutive months and, despite being requested to do so, does not settle the outstanding amounts within a reasonable period of up to two weeks; or
b)the tenant repeatedly fails to meet her payment obligations despite being requested to do so (at least 2 late rent payments within one calendar year); or
c)the tenant culpably violates any obligations under the lease to such an extent that the landlord cannot reasonably be expected to continue the lease and the violation is not remedied within a reasonable period of up to 2 weeks despite a request to do so; in particular, the following shall be considered a material breach of contract a violation of official regulations or non-compliance with permits in accordance with § 3 (2);
d)the tenant continues to use the rented property in breach of the contract despite a written warning from the landlord or violates essential provisions despite a written warning from the landlord.
4.If the rental agreement ends due to termination without notice by the lessor or otherwise prematurely for a reason for which the lessee is responsible, the lessee shall be liable until the end of the agreed rental period for the loss of rent incurred because the rental property cannot be rented at all or only temporarily under the terms of this agreement or can only be rented at less favorable terms. The lessor expressly reserves the right to assert further claims for damages. In such a case, the contracting parties shall use their best efforts to find a new tenant for the remaining period until the end of the agreed rental period. However, the lessor is entitled to reject replacement tenants named by the lessee for good cause; good cause in this context includes, in particular, a lack of expertise or reliability with regard to operator responsibility in accordance with § 3 (4).
§ 5 RENT
1.The monthly net rent payable by the lessee for the use of the leased property is EUR 48,947.52 (hereinafter referred to as "rent"), plus statutory sales tax, currently 19% (= EUR 9,300.03). The monthly rent therefore amounts to a total of EUR 58,247.55.
2.The rent is adjusted annually in line with changes in the consumer price index (CPI). The rent is adjusted on the basis of the average CPI for the previous year,
4
as published by the Federal Statistical Office. The adjustment takes place on January 1 of each year.
3.Any follow-up rent after the expiry of the 10-year basic rental period must be more than 75% of the rent that is usually paid for a property with buildings that is comparable in terms of type, location, and amenities.
4.The due date and payment of the rent are governed by the provisions of § 7 (3) below.
5.The tenant agrees that the landlord may send invoices electronically to the following email addresses: dynainvoiceDE@ccj-process.esker.net andachim.pabst@dyaenergetics.com.
§ 6 ADDITIONAL COSTS
1.In addition to the rent, the tenant shall bear all costs arising from the management of the rented property, in particular supply and disposal, maintenance and repair of the buildings and infrastructure facilities, unless these are billed separately under the service agreement existing between the parties or the shareholder relationship within TGHG. Below is a list of the current operating costs, which is not exhaustive:
-Building insurance and property tax
-Electricity
-Water supply
-Water disposal, known as the B-channel
-Water disposal, known as the Sieg canal
-Water disposal, known as the U-channel
-Waste disposal
-Safety management
-Road maintenance
-Property services
-Fence security
-Construction operations
-Energy supply directly via the tenant (currently Engie for heating, process steam, compressed air, process heat)
-Plant security
-Fire station / blasting site
-Parking
-Hazard warning system
-Permits
-TGHG in general (annual financial statements)
-Contributions of individual shareholders of TGHG / TGHG levy
-Administrative costs
As far as possible, the tenant shall ensure that underlying supply and service relationships are concluded on behalf of the tenant and that any costs and fees incurred in the broadest sense are settled directly by the tenant.
5
2.Any ancillary costs incurred or payable by the lessor for the period from the start of the lease shall be invoiced to the lessee against proof of costs. Unless advance payments are made in accordance with clause 3 below, these shall be due for payment to the lessor within two weeks of receipt of the statement by the lessee. The due date and payment shall be governed by the provisions of § 7 clause 3 below.
3.The landlord is free to charge a monthly advance payment ("advance operating costs") for the regular ancillary costs incurred or accrued by the landlord. Currently, the advance operating cost payments per calendar year amount to EUR 211,852.30 net, plus statutory sales tax, currently 19% (= EUR 40,251.94). The monthly advance payment therefore totals EUR 21,008.69.
The ancillary costs are settled retrospectively for each calendar year by June 30 of the following year, taking into account the advance payments made for that calendar year. Surpluses and additional payments shall be settled within two weeks of receipt of the statement by the tenant. The landlord's right to settle individual costs within the meaning of clause 3 above, which have not been included in the calculation of the advance payment amount, remains unaffected.
§ 7 GENERAL AND BASIC RENTAL TERMS AND CONDITIONS
1.Compliance with requirements and regulations
Notwithstanding the above § 3 (2), the tenant shall ensure that all legal regulations relevant and applicable to the business operations and use of the rented property and all official requirements and conditions, even if these form part of or are prerequisites for approvals that have been granted, applied for, or are to be maintained, are complied with and fulfilled at its own responsibility and expense, regardless of whether these are directed at the lessor, TGHG, or the lessee. This applies in particular to the operator's responsibility as an employer, structural and organizational fire protection, and proper wastewater disposal. This also includes the lessee only discharging wastewater into the sewer system in accordance with water law permits.
2.Change of use of the rental property
Changes in the use of the rental property or parts thereof, as well as any expansion, require the prior express written consent of the landlord, which may not be unreasonably withheld. The landlord may also make its consent contingent upon additional conditions, security deposits, or similar requirements. Any declarations of consent by the landlord shall always be subject to any necessary official approval for the change of use, even if the declaration of consent does not expressly refer to this. The tenant is responsible for obtaining all official approvals.
3.Payment of rent and advance payments for ancillary costs, offsetting
Rent and advance payments for ancillary costs are to be paid monthly in advance, postage and expenses free, to the account specified by the landlord, stating the purpose of use as "Troisdorf production site."
The date of receipt of the respective amount due in the lessor's account shall be decisive for the timeliness of the payment. If this date is exceeded, the lessee shall be in default of payment and shall trigger default interest at the maximum interest rate permitted by law from the due date.
Offsetting is only permitted with undisputed or legally established claims.
6
4.Maintenance/repairs and facility management
a.By renting the property, the tenant has actual control over parts of the site and buildings or parts of buildings on the entire site as a production location. It is therefore the intention of the parties that the tenant manages and administers the rented property as independently as possible; this has been taken into account in the calculation of the rent.
Within the scope of this lease, the tenant assumes the role of owner of the leased property to the extent permitted and is fully responsible, at its own expense, for the management, maintenance, manufacturer-compliant servicing, and safety of the leased property. In this respect, the tenant is also responsible for operator responsibility and facility management (FM), insofar as this has not been separately regulated in separately regulated within the framework of the service contract existing between [the parties].
However, the tenant must obtain the landlord's consent in good time before carrying out any work on the pipe and sewer network, the load-bearing structure, the drainage system, and, in particular, any work on the entire roof structure, including the roof covering.
b.Throughout the term of the contract, the tenant shall, at its own responsibility and expense, professionally maintain the rental property, including the directly associated outdoor facilities and roof waterproofing, service it in accordance with the manufacturer's specifications, and carry out the necessary maintenance so that the rental property remains in good and usable condition (except for normal wear and tear). This also includes cosmetic repairs.
c.This does not include the repair of damage caused by structural defects or damage to the load-bearing structure of the rented property caused by static factors, consisting of foundations, supports and beams, ceilings (excluding roof covering), exterior walls and windows. Any costs incurred as a result shall be borne by the lessor after prior consultation with the lessee, unless these have been separately regulated in the service contract existing between the parties. The lessor shall be responsible for the maintenance of the roads and underground pipes located on the entire site, even if these are located on or under the leased property. The costs incurred as a result shall be passed on to the lessee in accordance with § 6, unless these have been separately regulated in the service contract existing between the parties.
d.The lessee shall be responsible for the facility management of the leased property at its own expense and shall have all components of the building requiring maintenance (fire protection, all building services, elevators, doors, gates, windows, roof covering) regularly (at least every 2 years) and provide the lessor with proof of this once a year, unless this has been separately regulated in the service contract existing between [the parties]. The lessee shall be liable to the lessor for any damage caused by a breach of its duty of care.
5.Insurance
The tenant must ensure that all insurance policies necessary for the operational purpose (manufacture and processing of explosives) (property insurance in the form of all-risk insurance and environmental liability insurance) are taken out at an appropriate level. Coverage shall be provided at sliding replacement value in order to exclude underinsurance. Unless otherwise agreed within two months of the conclusion of this lease agreement, the tenant shall take out building insurance at
7
its own expense. If insurance is taken out by the landlord, the costs thereof shall be included in the apportionable ancillary costs to be borne by the tenant.
At the request of the landlord, the tenant must provide proof of the existence of this insurance.
6.Liability, duty to ensure public safety
The tenant shall only be entitled to claim damages from the landlord for defects or consequential damage resulting therefrom (e.g. to furnishings or goods) if the landlord is responsible for the defect through intent or gross negligence or if the landlord is in default with the rectification of defects expressly incumbent upon it under this agreement.
The lessor shall not be liable for disruptions to the use of the rental property caused by third parties (e.g., due to neighboring construction, road works). The lessor is also not liable for the consequences of damage to the rental property or its exterior walls caused by third parties, for example in the event of vandalism, burglary, or theft. It is the tenant's responsibility to equip the rental property with appropriate security measures or to insure it.
The tenant is responsible for any damage or contamination within the rental property, unless this was caused by the landlord or the property owner or by third parties on their behalf. Furthermore, the lessee shall indemnify the lessor against all claims by third parties, including claims by authorities and courts, which may be asserted against the lessor due to its business operations or the effects thereof. This includes, for example, liability under public law regulations, in particular under immission control, explosives, water and environmental protection laws, unless mandatory legal provisions stipulate otherwise.
The lessor hereby transfers all traffic safety and operator obligations incumbent upon it to the lessee's own responsibility, unless mandatory statutory provisions stipulate otherwise. The lessor may demand that the lessee indemnify it against third-party claims insofar as such claims are based on a breach of the lessee's obligations.
7.Measures taken by the lessor to prevent damage
The lessor may carry out repairs or alterations that are necessary or appropriate for the maintenance of the rental object, to avert imminent dangers, to repair damage, or to fulfill obligations under public law, even without the consent of the lessee. As far as possible, the lessor shall agree on appropriate dates with the lessee and have the work carried out in such a way that there is no significant impairment of the lessee's business operations.
In such cases, the tenant shall only be entitled to a rent reduction, compensation for damages, or the like if the measure renders the use of the rented property wholly or predominantly impossible.
8.Measures taken by the tenant
Changes, structural extensions, and other measures that go beyond normal use (including superstructures, plantings, or other changes) to the rental property by the tenant may only be carried out with the prior express written permission of the landlord. The lessor shall not unreasonably withhold such consent if the changes are necessary or expedient for the business operations of the lessee or the producer; however, the lessor may, if it has a legitimate interest, make its consent subject to conditions, security deposits, dismantling obligations, or similar
8
requirements. Changes to non-load-bearing walls, development, production, and testing facilities, and operating equipment owned by the tenant or the producer and the necessary infrastructure shall remain unaffected, provided that the roof or facade are not affected. Changes to the sewer and pipe network, roof structures and their supports, roof openings, and roof penetrations may only be carried out after prior written agreement with the landlord.
Any measures that go beyond normal use, in particular structural alterations, superstructures, plantings, or other changes, require the prior written consent of the lessor. Tacit approval is excluded.
This provision serves to protect the structural and functional integrity of the rental property and to comply with public law requirements.
An explicit prohibition on alterations is agreed for the leased space within the unsecured part of the premises = non-secured area. The tenant is not entitled to make structural alterations to this area, to build on it, or to alter it in any other way on a permanent basis. Any measures that go beyond normal use, in particular structural alterations, superstructures, plantings, or other changes, require the prior written consent of the lessor.
9.Buildings 600, 603, 616, 640, 643.03, and 643.04
In addition to the rental areas listed in § 1 in conjunction with Annexes 1a and 1b, buildings 600, 603, 616, 640, 643.03, and 643.04 were also rented under the existing rental agreement between the property owner and the tenant. As these buildings/rental spaces are to be used by the landlord itself in the future, the parties have agreed on the following separate provisions with regard to the term of the agreement and the rent for these rental properties:
The contract for buildings/rental spaces 600, 616, 640, and 643.04 shall also commence on January 1, 2026, at 12:00 a.m. The contract term and rent are set out in the following table:
| Building 600 Explosives storage | |||||
| Rent per sqm | €7.50 | ||||
| Total monthly rent, net | €480.00 | ||||
| plus 19% VAT | €91.20 | ||||
| Total gross monthly rent | €571.20 | ||||
| End of contract | June 30, 2026 | ||||
| Building 616 Packaging and decanting building | |||||
| Rent per sqm | €5.60 | ||||
| Total monthly rent, net | €733.60 | ||||
| plus 19% VAT | €139.38 | ||||
| Total gross monthly rent | €872.98 | ||||
| End of contract | June 30, 2026 | ||||
9
| Building 640 Shipping building Office | |||||
| Rent per sqm | €5.60 | ||||
| Total monthly rent, net | €980 | ||||
| plus 19% VAT | €186.20 | ||||
| Total gross monthly rent | €1,166.20 | ||||
| End of contract | February 28, 2027 | ||||
| Building 643.04 Blasting cord production Loading levels | |||||
| Rent per sqm | €5.60 | ||||
| Total monthly rent, net | €801.58 | ||||
| plus 19% VAT | €152.30 | ||||
| Total gross monthly rent | €953.88 | ||||
| End of contract | June 30, 2027 | ||||
Buildings 603 (interim storage facility for explosives) and 643.03 (detonating cord production, loading rooms), which have been leased by the property owner to date, will no longer be leased by the tenant but will be handed over to the landlord on January 1, 2026.
The provisions of this lease agreement apply accordingly to the rental of these buildings and rental spaces.
10.Subletting, transfer of use
Unless otherwise specified below, subletting or other transfer of use to third parties, including parts of the leased property, requires the prior and express written consent of the lessor, which shall only be refused for good cause. An important reason shall always exist if (i) the subtenant's business operations compete with the landlord's business operations; or (ii) it is not specified by a corresponding time limit on the rental period or by other contractual provisions in the sublease agreement that the sublease agreement shall end no later than the present rental agreement and that the subleased space shall be completely vacated at the same time; or (iii) reasons relating to the subtenant give rise to doubts as to their expertise or reliability with regard to operator responsibility in accordance with § 3 (4).
In addition to the consent of the Landlord, the subletting or other transfer of use to third parties, including parts of the rented property, requires the prior and express written consent of TGHG. The lack of consent from TGHG constitutes an important reason for the Landlord to refuse consent.
The tenant shall disclose all contractual agreements relating to the intended subletting to the landlord and TGHG.
11.Liability for harmful soil changes
The parties are aware of the information from the Rhein Sieg district's register of contaminated sites and areas of concern dated June 10, 2022 (Ref. 66.22-5108/1258-11-13), which shows that three sub-areas of the leased property (registration nos. 5108/1258-11 to 5108/1258-13) are listed, some of which require remediation.
10
The landlord is not responsible for ensuring that the rental property is free of environmental damage. When the landlord purchased the rental property, expert Bertram Schrade prepared a summary of the environmental reports (Appendix 2) on the rental property, which is known to the tenant. The tenant rents the rental property with knowledge of the existing environmental damage.
The producer DynaEnergetics has been using the rental property since October 1, 2001. Appendix 4 lists all substances that the tenant has handled or is currently handling on the rental property since that date. The tenant shall notify the landlord immediately of any changes to this list of substances. The tenant is responsible for all environmental damage caused by substances listed in Appendix 4 that has occurred since the tenant began using the property. All other environmental damage shall be the responsibility of the lessor. If environmental damage is attributable to a substance listed in Appendix 4, the lessee shall bear the burden of proof that (and, if applicable, to what extent) this damage occurred before the lessee began using the property.
The tenant is liable for environmental damage falling within its area of responsibility as defined above (including harmful soil changes and pollutants on/in the rental property) vis-à-vis the landlord and also vis-à-vis the public administration, unless mandatory legal provisions stipulate otherwise, during and up to 10 years after the end of the tenancy, and shall indemnify the lessor in this respect. In such a case, the tenant undertakes to take all necessary steps to eliminate any harmful soil changes and pollutants on/in the rental property (including carrying out the necessary remediation measures) and to successfully conclude the potential proceedings before the public administration without negative consequences for the landlord.
The lessor is entitled to check the tenant's compliance with environmental regulations at any time and, for this purpose, to enter the leased property and/or buildings and to inspect all test reports in accordance with ISO 14001, approval documents, and other documents with environmental content.
The tenant shall immediately remedy any defects that may affect compliance with environmental regulations at its own expense.
If an authority initiates investigative measures, an order to remove or remediate, or other proceedings, measures, administrative acts, or a fine notice, or if private third parties assert claims against a party in connection with environmental damage to the leased property, that party is obligated to inform the other party immediately, in particular in good time before the expiry of the relevant appeal periods. Each party is obliged to contest administrative acts, penalty notices and third-party claims, including non-final judgments, if applicable, with the relevant legal remedies, provided that the legal remedy has a reasonable chance of success or the other party wishes to lodge an appeal. The challenging party shall conduct the proceedings in consultation with the other party. The other party is entitled to participate in these proceedings and to lodge appeals or legal remedies at its own expense. The parties shall support each other appropriately in this regard and issue any necessary powers of attorney. The costs of such proceedings shall be borne by the tenant if it is obliged to indemnify the landlord in respect of the claim in question, otherwise they shall be borne by the landlord.
The tenant shall maintain environmental liability insurance appropriate in terms of type and scope for the duration of the contract.
11
12.Entering the rented property and further measures
The lessor or persons authorized by the lessor are entitled, after prior consultation and during normal business hours, to enter the leased property, in particular to check compliance with the obligations under the lease agreement by the lessee and to prepare for the utilization of the leased property after termination of the present lease agreement (including a project development of the leased property), to take photographs for these purposes, create documentation, and obtain the necessary information. In doing so, the lessor must ensure that the confidentiality requirements of the tenant's and producer's business operations are taken into account.
13.Termination of the lease, return
At the time of concluding the lease agreement, it is unclear how the leased property will be utilized or used after the lease has ended. Since the requirements for the rental property to be returned by the tenant vary greatly depending on the type of use intended by the landlord at that time, the parties intend to inspect the condition of the rental property before the end of the rental period and to reach an agreement that takes into account the interests of both parties as far as possible. If no such agreement is reached or no deviating provision is made, the following shall apply:
a)The lessee is obliged to return the leased property to the lessor on the last day of the lease term, completely vacated. This means that the lessee must remove all items belonging to them or to a sublessee (business-related machinery and equipment used for administration, development, production, testing and quality assurance, service and maintenance, operating equipment and fixtures, as well as residues (e.g., liquid residues in pipes, etc.) in the rented property that can be removed at reasonable expense, at their own expense and on their own responsibility, and, if necessary, dispose of them in compliance with legal requirements. This also includes advertising installations attached by the tenant or a subtenant.
b)If, upon termination of the lease, maintenance, repair work, or cosmetic repairs are necessary—e.g., due to unreasonable wear and tear—which, according to the lease agreement, are the responsibility of the tenant, the tenant must carry these out in good time before returning the rental property to the standard it was in at the time of handover.
c)At the request of either party, the parties shall jointly commission an environmental report at the time of return in order to determine existing environmental damage and, if necessary, to enable attribution to various parties responsible. The parties shall select the expert by mutual agreement and share the costs of the report.
The lessor is generally entitled to demand compensation in the amount of the last agreed rent and ancillary costs, in particular operating costs, in the event of a delay in the possibility of use or rental. Further rights of the lessor shall remain unaffected.
§ 8 ANNEXES AND FINAL PROVISIONS
1.The annexes form an integral part of this rental agreement.
2.This agreement must be in writing. This agreement contains all provisions between the contracting parties regarding the tenancy; no ancillary agreements have been made. Any amendments and additions to this agreement must be made in writing
12
without exception; this also applies to any cancellation or waiver of this written form clause.
3.Should individual provisions of this agreement be or become invalid, this shall not affect the validity of this rental agreement and the validity of the remaining provisions. Immediately after becoming aware of the invalidity, the contracting parties shall agree on a valid provision to replace the invalid provision, which comes as close as possible to the economic intent of both parties at the time of conclusion of this rental agreement. The same applies to any contractual gaps in this rental agreement.
4.The tenant is not authorized to assign her rights or claims arising from this contract to third parties without the prior express written consent of the landlord.
5.This contract is subject to the laws of the Federal Republic of Germany.
6.The contract shall enter into force on January 1, 2026.
Troisdorf, Troisdorf,
DynITEC GmbH DynaEnergetic Europe GmbH
.......................................................... .......................................................
Appendix 1A: Site plan of the rental property Appendix 1B: Building overview of the rental property Appendix 2: Environmental report
Appendix 3: Photo documentation Appendix 4: List of materials
Handover report to follow separately with its own cover letter
13
Exhibit 19.1
Insider Trading Policy
In order to take an active role in the prevention of insider trading violations by officers, directors, employees and other related individuals of DMC Global Inc. (the “Company”) and its subsidiaries, the Company has adopted this Insider Trading Policy (the “Policy”).
Statement of Intent
The Company opposes the misuse of material non-public information in the trading of securities and it is the intent of this Policy to implement procedures designed to prevent trading based on material non-public information regarding the Company, including any of its subsidiaries.
Covered Parties
The Policy covers officers, directors and all other employees of, or consultants or contractors to, the Company and its subsidiaries, as well as their immediate families, and members of their households (“Insider(s)”). These restrictions also apply to any entity over which an Insider exercises or shares investment control (such as a partnership or family trust). Insiders are responsible for the compliance of their family members and personal household.
Covered Transactions
This Policy applies to all transactions in the Company’s securities, including common stock and any other securities the Company may issue from time to time, such as preferred stock, warrants and convertible debentures, as well as to derivative securities relating to the Company’s stock, whether or not issued by the Company, such as publicly-traded options.
Prohibited Transactions
No Insider shall engage in any transaction involving a purchase, sale or gift of the Company’s securities, including any offer to purchase or offer to sell, during any period in which the Insider possesses material non-public information concerning the Company or its subsidiaries.
No Insider shall disclose (“tip”) material non-public information about the Company or its subsidiaries to any other person where such information may be used by such person to his or her profit by trading in the securities of companies to which such information relates, nor shall such Insider or related person make recommendations or express opinions on the basis of material non-public information as to trading in the Company’s securities.
No Insider shall engage in any transaction involving the purchase, sale or gift of another company’s securities while in possession of material non-public information about such company when that
1
information is obtained in the course of employment with, or the performance of services on behalf of, the Company and for which there is a relationship of trust and confidence concerning the information.
Definition of Material Non-Public Information
It is not possible to define all categories of material information. However, information should be regarded as material if there is a substantial likelihood that it would be considered important to a reasonable investor in making an investment decision regarding the purchase or sale of the Company’s securities. Put another way, there must be a substantial likelihood that the information would be viewed by the reasonable investor as having significantly altered the total mix of information available in the market concerning the Company. Either positive or negative information may be material. Depending on facts and circumstances, information that may be considered material includes, but is not limited to:
•Projections of future earnings or losses, or other earnings guidance, or changes in projections or guidance;
•Financial performance, especially quarterly and year-end earnings or significant changes in financial performance or liquidity;
•A pending or proposed merger, acquisition, joint venture, tender offer, or an acquisition or disposition of significant assets;
•A Company restructuring;
•A change in dividend policy, the declaration of a stock split, or an offering of additional securities;
•A change in senior management;
•A change in auditors or notification that the auditor’s reports may no longer be relied upon;
•Actual or threatened major litigation, or the resolution of such litigation;
•Impending bankruptcy or the existence of severe liquidity problems;
•A significant cybersecurity incident; or
•The imposition of an event-specific restriction on trading in Company securities or the securities of another company, or the extension or termination of such restriction.
Non-public information is any information that has not been disclosed generally to the marketplace. Once the Company has made a public announcement of material information, including through an earnings release, the Company’s shareholders and the investing public should be afforded the time to receive the information and act upon it. The information should not be considered as public, and you should not engage in any transactions, until after the close of the second full trading day after the information has been released.
Additional Restrictions
Insiders are subject to additional restrictions contained in the DMC Policy on Hedging, Pledging and Certain Other Securities Transactions, attached as Exhibit A, which includes restrictions on selling Company shares short, buying or selling puts, calls or other derivatives related to Company securities, trading Company securities on margin, pledging Company shares or engaging in hedging transactions. Any Company shares purchased in the open market (including shares purchased under the Employee
2
Stock Purchase Plan (“ESPP”)) should be held for a minimum of six months. Directors and executive officers of the Company are also subject to the short-swing profit rule under Section 16(b) of the Securities Exchange Act of 1934, as amended (the “Exchange Act”), which prevents those persons from profiting, even unintentionally, on any combination of transactions involving Company shares within a six-month time period.
Company Blackout Periods
The Company has determined that all officers, directors, and those other persons identified on Exhibit B (as may be amended from time to time by the Compliance Officer (as defined below)) (“Certain DMC Associates”) are subject to the following:
•Regularly Scheduled Blackout Periods. Certain DMC Associates may not trade in Company securities within the period commencing 7 calendar days before the end of each quarter and ending after the close of the second full trading day after the Company announces publicly its quarterly or annual earnings.
•Special Blackout Periods. Certain DMC Associates may not trade in Company securities during any special blackout periods designated by the Company. You will be informed by the Compliance Officer if you are subject to a special blackout period. Certain DMC Associates are also prohibited from disclosing to any other outside party the existence of any such special blackout periods.
No Insider in possession of material non-public information concerning the Company may trade in Company securities, even if such trades were to occur outside the blackout periods. After such information becomes publicly available, an Insider may trade in Company securities after the close of trading on the second full trading day following the Company’s public release of such information, and so long as such trade occurs outside the blackout periods.
Pre-clearance of Trades by Executive Officers and Directors
All executive officers and directors of the Company must refrain from engaging in transactions in the Company’s securities, even when outside of blackout periods, without first contacting the Company’s Compliance Officer and obtaining pre-clearance to commence trading in the Company’s securities. Executive officers and directors should obtain pre-clearance prior to enrolling in the ESPP. In addition, all executive officers and directors are required to comply with Section 16 of the Exchange Act, and related rules and regulations which set forth reporting obligations as well as limitations on “short swing” transactions. The Company is available to assist in filing Section 16 reports. Please direct any inquiries concerning compliance to the Compliance Officer.
Adoption and Effect of 10b5-1 Trading Plans
The Company permits Certain DMC Associates to adopt trading plans in accordance with Rule 10b5-1(c) promulgated under the Exchange Act (17 C.F.R. §240.10b5-1(c)) and otherwise pursuant to the Company’s procedure for adopting such a trading plan (a “10b5-1 trading plan”). The restrictions on trading set forth in this Policy shall not apply to trades made pursuant to a 10b5-1 trading plan. More
3
information concerning trading plans is available from the Compliance Officer. A 10b5-1 trading plan must be approved in advance by the Compliance Officer.
Exemptions from this Policy
This Policy does not apply to the exercise of a stock option acquired under the Company’s equity compensation plans or the forfeiture of shares to the Company to satisfy tax withholding requirements in connection with an equity compensation award or a similar transaction so long as, in each case, only the Company and the relevant Insider are involved in the transaction. Such transactions may, however, trigger reporting requirements for Certain DMC Associates. Automatic purchases under the ESPP are not exempt from this Policy unless enrollment in the ESPP is structured so as to meet the requirements of a 10b5-1 trading plan.
Consequences for Violation
Employees who violate this Policy shall also be subject to disciplinary action by the Company, which may include ineligibility for future participation in the Company’s equity stock option and other incentive plans or termination of employment.
Pursuant to U.S. federal and state securities laws, Insiders may be subject to criminal and civil fines and penalties as well as imprisonment for engaging in transactions in the Company’s securities at a time when they have knowledge of material non-public information regarding the Company or its subsidiaries. In addition, Insiders may be liable for improper transactions by any person (commonly referred to as a “tippee”) to whom they have disclosed material non-public information regarding the Company or its subsidiaries or to whom they have made recommendations or expressed opinions on the basis of such information as to trading in the Company’s securities.
If securities transactions are scrutinized, they are likely to be viewed after-the-fact with the benefit of hindsight. As a result, before engaging in any transaction, Insiders must carefully consider how the transaction might be construed in the bright light of hindsight.
Individual Responsibility
Every officer, director and other employee, consultant and contractor has the individual responsibility to comply with this Policy, and the applicable laws of their jurisdiction. An Insider may, from time to time, have to forego a proposed transaction in the Company’s securities even if he or she planned to make the transaction before learning of the material non-public information and even though the Insider believes he or she may suffer an economic loss or forego anticipated profit by waiting. Trading in the Company’s securities during the trading window should not be considered a “safe harbor,” and all directors, officers and other persons should use good judgment at all times.
Post-Termination Transactions
This Policy continues to apply to transactions in Company securities even after termination of service to the Company. If an individual is in possession of material non-public information when his or her
4
service terminates, that individual may not engage in transactions in Company securities until that information has become public or is no longer material.
Compliance Officer
The Company’s Associate General Counsel shall serve as the Compliance Officer under this Policy (the “Compliance Officer”). The duties of the Compliance Officer shall include, but are not limited to, the following:
•Pre-clearing transactions as required under this Policy.
•Assisting, as requested, in the preparation and filing of Section 16 reports (Forms 3, 4 and 5) for Section 16 reporting persons.
•Reviewing and approving 10b5-1 trading plans.
•Serving as the designated recipient at the Company of copies of reports filed with the SEC by Section 16 reporting persons under Section 16 of the Exchange Act.
•Periodically reminding all Section 16 reporting persons of their obligations to report and sending quarterly reminders of the dates that the trading window described above begins and ends.
•Circulating the Policy (and/or a summary thereof) to all employees, including Section 16 reporting persons, on an annual basis.
•Assisting the Company in implementation of the Policy.
•Coordinating with Company counsel regarding compliance activities with respect to Rule 144 requirements, Section 16 of the Exchange Act and insider trading laws to ensure that the Policy is amended as necessary to comply with such requirements.
Please consult with the Compliance Officer if you have any questions regarding this Policy or any proposed transaction.
5
EXHIBIT A
Policy on Hedging, Pledging and Certain Other Securities Transactions
[Omitted pursuant to Item 601(a)(5) of Regulation S-K and will be furnished to the SEC upon request.]
6
EXHIBIT B
Certain DMC Associates
[Omitted pursuant to Item 601(a)(5) of Regulation S-K and will be furnished to the SEC upon request.]
7
Exhibit 23.1
CONSENT OF INDEPENDENT REGISTERED PUBLIC
ACCOUNTING FIRM
We consent to the incorporation by reference in the following Registration Statements:
1.Registration Statement (Form S-3 No. 333-238211, Form S-3 ASR 333-255719, Form S-3 No. 333-270618),
2.Registration Statement (Form S-8 No. 333-182979 and Form S-8 No. 333-218177) pertaining to the Company’s Employee Stock Purchase Plan,
3.Registration Statement (Form S-8 No. 333-214460) pertaining to the Company’s 2016 Omnibus Incentive Plan, and
4.Registration Statement (Form S-8 No. 333-287265) pertaining to the Company’s 2025 Omnibus Incentive Plan;
of our reports dated February 23, 2026, with respect to the consolidated financial statements of DMC Global Inc. and the effectiveness of internal control over financial reporting of DMC Global Inc. included in this Annual Report (Form 10-K) of DMC Global Inc. for the year ended December 31, 2025.
| /s/ Ernst & Young LLP | |||||
| Denver, Colorado | |||||
| February 23, 2026 | |||||
Exhibit 31.1
CERTIFICATIONS
I, James O'Leary, certify that:
1. I have reviewed this annual report on Form 10-K of DMC Global Inc.;
2. Based on my knowledge, this report does not contain any untrue statement of a material fact or omit to state a material fact necessary to make the statements made, in light of the circumstances under which such statements were made, not misleading with respect to the period covered by this report;
3. Based on my knowledge, the financial statements, and other financial information included in this report, fairly present in all material respects the financial condition, results of operations and cash flows of the registrant as of, and for, the periods presented in this report;
4. The registrant’s other certifying officer and I are responsible for establishing and maintaining disclosure controls and procedures (as defined in Exchange Act Rules 13a-15(e) and 15d-15(e)) and internal control over financial reporting (as defined in Exchange Act Rules 13a-15(f) and 15d-15(f)) for the registrant and have:
a) Designed such disclosure controls and procedures, or caused such disclosure controls and procedures to be designed under our supervision, to ensure that material information relating to the registrant, including its consolidated subsidiaries, is made known to us by others within those entities, particularly during the period in which this report is being prepared;
b) Designed such internal control over financial reporting, or caused such internal control over financial reporting to be designed under our supervision, to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles;
c) Evaluated the effectiveness of the registrant’s disclosure controls and procedures and presented in this report our conclusions about the effectiveness of the disclosure controls and procedures, as of the end of the period covered by this report based on such evaluation; and
d) Disclosed in this report any change in the registrant’s internal control over financial reporting that occurred during the registrant’s most recent fiscal quarter (the registrant’s fourth fiscal quarter in the case of an annual report) that has materially affected, or is reasonably likely to materially affect, the registrant’s internal control over financial reporting; and
5. The registrant’s other certifying officer and I have disclosed, based on our most recent evaluation of internal control over financial reporting, to the registrant’s auditors and the audit committee of registrant’s board of directors (or persons performing the equivalent functions):
a) All significant deficiencies and material weaknesses in the design or operation of internal control over financial reporting which are reasonably likely to adversely affect the registrant’s ability to record, process, summarize and report financial information; and
b) Any fraud, whether or not material, that involves management or other employees who have a significant role in the registrant’s internal control over financial reporting.
Dated: February 23, 2026
| /s/ James O'Leary | |||||
| James O'Leary | |||||
| Executive Chairman, President and Chief Executive Officer | |||||
| of DMC Global Inc. | |||||
Exhibit 31.2
CERTIFICATIONS
I, Eric V. Walter, certify that:
1. I have reviewed this annual report on Form 10-K of DMC Global Inc.;
2. Based on my knowledge, this report does not contain any untrue statement of a material fact or omit to state a material fact necessary to make the statements made, in light of the circumstances under which such statements were made, not misleading with respect to the period covered by this report;
3. Based on my knowledge, the financial statements, and other financial information included in this report, fairly present in all material respects the financial condition, results of operations and cash flows of the registrant as of, and for, the periods presented in this report;
4. The registrant’s other certifying officer and I are responsible for establishing and maintaining disclosure controls and procedures (as defined in Exchange Act Rules 13a-15(e) and 15d-15(e)) and internal control over financial reporting (as defined in Exchange Act Rules 13a-15(f) and 15d-15(f)) for the registrant and have:
a. Designed such disclosure controls and procedures, or caused such disclosure controls and procedures to be designed under our supervision, to ensure that material information relating to the registrant, including its consolidated subsidiaries, is made known to us by others within those entities, particularly during the period in which this report is being prepared;
b. Designed such internal control over financial reporting, or caused such internal control over financial reporting to be designed under our supervision, to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles;
c. Evaluated the effectiveness of the registrant’s disclosure controls and procedures and presented in this report our conclusions about the effectiveness of the disclosure controls and procedures, as of the end of the period covered by this report based on such evaluation; and
d. Disclosed in this report any change in the registrant’s internal control over financial reporting that occurred during the registrant’s most recent fiscal quarter (the registrant’s fourth fiscal quarter in the case of an annual report) that has materially affected, or is reasonably likely to materially affect, the registrant’s internal control over financial reporting; and
5. The registrant’s other certifying officer and I have disclosed, based on our most recent evaluation of internal control over financial reporting, to the registrant’s auditors and the audit committee of registrant’s board of directors (or persons performing the equivalent functions):
a. All significant deficiencies and material weaknesses in the design or operation of internal control over financial reporting which are reasonably likely to adversely affect the registrant’s ability to record, process, summarize and report financial information; and
b. Any fraud, whether or not material, that involves management or other employees who have a significant role in the registrant’s internal control over financial reporting.
Dated: February 23, 2026
| /s/ Eric V. Walter | |||||
| Eric V. Walter | |||||
Chief Financial Officer of DMC Global Inc. | |||||
Exhibit 32.1
CERTIFICATION PURSUANT TO 18 U.S.C. SECTION 1350,
AS ADOPTED PURSUANT TO
SECTION 906 OF THE SARBANES-OXLEY ACT OF 2002
In connection with the Annual Report of DMC Global Inc. (the “Company”) on Form 10-K for the period ended December 31, 2025 as filed with the Securities and Exchange Commission on the date hereof (the “Report”), I, James O'Leary, Executive Chairman and President and Chief Executive Officer of the Company, certify pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002, that:
(i) The Report fully complies with the requirements of Section 13(a) or 15(d) of the Securities Exchange Act of 1934; and
(ii) The information contained in the Report fairly presents, in all material respects, the financial condition and results of operations of the Company.
| February 23, 2026 | |||||
| /s/ James O'Leary | |||||
| James O'Leary | |||||
| Executive Chairman, President and Chief Executive Officer | |||||
| of DMC Global Inc. | |||||
A signed original of this written statement required by Section 906 has been provided to DMC Global Inc. and will be retained by DMC Global Inc. and furnished to the Securities and Exchange Commission or its staff upon request.
Exhibit 32.2
CERTIFICATION PURSUANT TO 18 U.S.C. SECTION 1350,
AS ADOPTED PURSUANT TO
SECTION 906 OF THE SARBANES-OXLEY ACT OF 2002
In connection with the Annual Report of DMC Global Inc. (the “Company”) on Form 10-K for the period ended December 31, 2025 as filed with the Securities and Exchange Commission on the date hereof (the “Report”), I, Eric V. Walter, Chief Financial Officer of the Company, certify pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002, that:
(i) The Report fully complies with the requirements of Section 13(a) or 15(d) of the Securities Exchange Act of 1934; and
(ii) The information contained in the Report fairly presents, in all material respects, the financial condition and results of operations of the Company.
| February 23, 2026 | |||||
| /s/ Eric V. Walter | |||||
| Eric V. Walter | |||||
Chief Financial Officer of DMC Global Inc. | |||||
A signed original of this written statement required by Section 906 has been provided to DMC Global Inc. and will be retained by DMC Global Inc. and furnished to the Securities and Exchange Commission or its staff upon request.