Greetings, and welcome to the 3D Systems First Quarter 2026 Earnings Conference Call and Webcast. At this time, all participants are in listen-only mode. A question and answer session will follow the formal presentation, and you may be placed in the question queue at any time by pressing star 1 on your telephone keypad. As a reminder, this conference is being recorded. If anyone should require operator assistance, please press star 0. It's now my pleasure to turn the call over to Vice President of Investor Relations, Monica Gould. Monica, please go ahead.

Hello and welcome to 3D Systems First Quarter 2026 Earnings Conference Call. With me on today's call are Dr. Jeffrey Graves, President and CEO, and Phyllis Nordstrom, Chief Financial Officer. The webcast portion of this call contains a slide presentation that we will refer to during the call. Those following along on the phone who wish to access the slide portion of this presentation may do so on the Investor Relations section of our website. The following discussion and responses to your questions reflect Manchin's views as of today only and will include forward-looking statements as described on this slide. Actual results may differ materially. Additional information about factors that could potentially impact our financial results is included in our latest press release and our filings with the SEC, including our most recent annual report on Form 10-K and quarterly reports on Form 10-Q. During this call, we will discuss certain non-GAAP financial measures. In our press release and slides accompanying this webcast, you will find additional disclosures regarding these non-GAAP measures, including reconciliations with comparable gap measures. And with that, I'd like to turn the call over to our president and CEO, Dr. Jeffrey Graves, for opening remarks. Thank you, Monica, and good

morning, everyone. Building on the momentum we achieved in the fourth quarter of last year, I'm pleased to report a strong first quarter performance for 2026. I'll start today by reviewing a few highlights from our first quarter and provide some comments on overall market conditions. I'll then provide an update on our business strategy and key growth initiatives. After this, I'll turn things over to our CFO, Phyllis Nordstrom, to summarize the quarter's financials. When Phyllis concludes, we'll open up the call for Q&A. So let's turn to slide five. The additive manufacturing industry is now beginning to emerge from a multi-year trough driven largely by global economic and geopolitical challenges that led customers to severely curtail capital spending. Our company's targeted investments in research and development, which we sustained in the face of intense cost pressures over this period, are now enabling us to introduce a completely refreshed portfolio of new products, spanning from direct metal printing systems to the five major polymer printing platforms. No company in our industry can match this range of technologies, nor the product performance that these systems can deliver. While it's been a painful period, the results can now begin to be seen in our performance, and there's much more excitement to come. I want to thank our dedicated employees for their hard work over the last few years in a highly cost-constrained environment. Speaking directly to my colleagues around the world, the success we're now seeing is a direct reflection of your talent and commitment to our company and to our customers. To derive the highest value from R&D investments, we focus them intensely on our three key growth markets, aerospace and defense, medtech, and dental. These markets in particular derive enormous value from 3D printing and are all expected to grow significantly in the years ahead. They are also the most challenging markets to penetrate given the extreme requirements for quality, precision, reproducibility, and regulatory oversight. Fortunately, we have a rich history and strong foundation in each of these markets, which provides the critical infrastructure and expertise needed for success. On slide six, our Q1 highlights tell the story. Solid growth in printer sales, increased momentum in part sales, strong growth in healthcare material sales. These results reflect the impact of our technology and market focus. From a product standpoint, we saw double-digit year-over-year growth in printer and material sales, as well as parts manufacturing, particularly in metals. We also saw balanced growth across both of our business units, healthcare and industrial. Turning to slide seven, in medtech, we continue to build on our market-leading position. During the first quarter, we saw strong double-digit year-over-year growth in several key areas, including medical parts manufacturing, printer sales, and surgical planning services. Medical parts manufacturing demand was driven specifically by titanium spinal implants and both titanium and cobalt-chrome joint implants used in replacement procedures. Printer revenue was led by sales of our DMP350 metal printer to medical device customers who are now entering a refresh and expansion cycle. This growth was partially offset by lower-than-expected sales to one key customer due to a temporary disruption in their internal operations, which was resolved by the end of the quarter. We're already seeing a recovery in their demand and expect a solid rebound in the second quarter. We also saw increased requirements for print know-how transfer by a large global healthcare customer as they prepared to purchase printers and transition to high-volume parts manufacturing, likely to complete in 2027. This example illustrates the three-phase growth model that we discussed on our Q4 call, namely process development, low-to-intermediate volume part production, and ultimately full system sales. As highlighted on slide 8, Momentum in Dental is accelerating across the full spectrum of our solutions, which we classify as straighten, repair, replace, and protect. We saw strong year-over-year double-digit growth in dental material sales, driven by both an increase in demand for aligners, as well as in prosthetic materials for tooth repair, which we sell under our Vertex brand. Our Vertex dental materials have been a mainstay in Europe for many years, and we were pleased to gain U.S. regulatory approval late last year following a protracted trademark negotiation. This doubled the size of the market for Vertex, and it's now beginning to be reflected in our dental revenue performance. Now turning to slide nine. As you know, we've been very excited about our new product launch in the denture market. Two quarters into sale of these marvelous platforms, I can tell you that the reception by our dental lab customers and dentists alike has been terrific. As an example, yesterday we announced a major commercial milestone reflecting the enthusiasm of our denture technology is generating. In this case, Roe Dental Laboratory, one of the nation's premier full-service digital dental labs, became the first major U.S. dental lab to deploy an extensive fleet of our NextDent 300 jetted denture printing systems across their multiple sites. Following our U.S. launch in the fall of 2025, Roe has expanded their purchases, effectively tripling their manufacturing capacity for high-precision, multi-material, monolithic dentures. As B.J. Kowalski, CEO of Roe Dental Labs, said, the next DENT 300 has exceeded our expectations in production efficiency, dentist acceptance, and patient satisfaction. Adding more systems at this early stage allows us to triple output while maintaining the highest standards of quality and consistency. From a market standpoint, following our U.S. regulatory approval last year, we recently received the equivalent EU Phase 2A approval for our denture printing solution, two months ahead of schedule. With both U.S. and EU regulatory approvals now in place, we've significantly expanded our addressable market to more than 60 million indentualist patients, roughly one-third of the global market. This represents a multi-billion-dollar opportunity as dental labs around the world transition from traditional labor-intensive methods to scalable, high-margin digital workflows. We expect to announce regulatory approvals in additional countries as they are gained throughout the year. Looking ahead for our denture platform, we've built a solid order backlog moving into our second quarter and are raising our internal production targets for the second half of the year. The Nextint 300 has been the most successful new product launch since my arrival at 3D Systems five years ago. with very few installation issues, rapid integration in lab workflows, and acceptance by dentists, often upon initial exposure to the product. From a patient standpoint, these printed dentures look wonderful, fit perfectly, and can be worn with confidence due to their toughness and wear resistance, a winning equation for the lab, the dentist, and the patient. I fully expect our portfolio of dental solutions to be a major contributor through our revenue and profitability for many years to come. Moving to slide 10, before shifting our focus to aerospace and defense markets in detail, I want to first make clear the way in which 3D printing is used for these critical applications. What many investors do not appreciate is that our company is unique in offering two complementary approaches to the manufacture of high-reliability metal components, both of which are seeing a rapid rise in demand. The first is direct metal printing, often called DMP for short, of components, which uses high-powered lasers to directly center metal powder under a tightly controlled environment to form fully dense parts. In this process, it's essential that there is no binder or other contaminant in the system as these will degrade the performance of the part. This is the way the very highest performing metal parts are manufactured, and it will remain so. Those that do not have this technology will simply not be able to participate in this high-value portion of the market. The second path for making metal parts is through the use of high-precision SLA-printed patterns for investment casting of specialty metals. This approach gives customers the flexibility on part size, material, and design at a cost and performance level that's virtually impossible to achieve with any other approach. Many complex aerospace systems, such as those used in rocket and aircraft propulsion systems, increasingly make use of both methods for the manufacture of critical flight components. Without them, we could not be routinely discussing space exploration, hypersonic flight, or many other advanced systems that are an integral part of our country's future. For the last several years, we've targeted leadership in both of these metal technologies, the culmination of which has been our DMP350 triple laser system and the SLA825 polymer platform that we've released over the last several months and that are rapidly gaining traction with key customers around the world. As you can see on slide 11, our metal printer portfolio now includes the DMP Flex 200, the DMP 350 triple, the DMP 500, and our next generation large format metal printer system, the development of which has been supported in large part by the U.S. government. This $28 million development program is designed to ensure leadership for U.S. in metal printing for the future. These systems deliver significant performance benefits and lay the foundation for further expansion in capacity, productivity, and material flexibility as the 3D-printed metal market continues to expand. And finally, turning to slide 12, aerospace and defense, which we discussed extensively in our last earnings call, remains the largest and one of the fastest-growing segments within our industrial solutions business. Examples of the project's driving growth include titanium antenna brackets for satellite systems that are 25% lighter and can be produced in half the time compared with traditional methods, as well as the mass production of turbine blades for jet engines and industrial turbines that improve performance and efficiencies in both flight systems and ground-based energy applications. Given our unmatched breadth of defense-focused printing technology, we continue to expect over 20% growth in our air and defense markets this year, equating to approximately $35 million in revenue in 2026. This growth will be largely driven by space, naval, and aero propulsion applications, as well as the expanding use of sophisticated flight and weapon systems in unmanned aerial vehicles and precision munitions. In response to the rapidly growing demand for aerospace and defense components, We're investing in a significant expansion to our Littleton, Colorado facility, adding 80,000 square feet of manufacturing space for the production of metal components. The grand opening of our new facility is on track for late summer, and we're excited about these new growth opportunities that this new facility opens for our company. Looking ahead on slide 13, we have the largest installed base of production printing systems in the industry, a refreshed portfolio in both polymers and metals, new printer systems that are gaining traction with customers, and rapidly expanding opportunities in high-growth, high-reliability markets. Acceptance of additive manufacturing is accelerating, and we're well-positioned to capitalize on it. While the world situation never fails to present new challenges, I am more excited than ever about the future of our company. With that overview, I'll turn to slide 14 and hand the call over to Phyllis to walk through the financial results for Q1 in

detail. Phyllis. Thank you, Jeff, and good morning, everyone. Before I begin reviewing our first quarter results, I'd like to remind you that we completed the divestiture of the Geomagic, 3D Expert, and Octon Legacy software businesses in 2025. Throughout today's call, I will reference comparisons on an adjusted basis, excluding these divestitures, to provide a clear apples-to-apples comparison of our performance across periods. Turning to our results for the first quarter, beginning on slide 15. First quarter consolidated revenue was $95.5 million, an increase of 11% year-over-year, demonstrating a solid return to revenue growth in the quarter. This meaningful increase was driven across our key growth markets, medtech, dental, and aerospace and defense, each achieving meaningful double-digit growth in the quarter. Performance within aerospace and defense in MedTech was supported by higher metal printer sales along with solid growth across other product categories. In dental, higher sales were driven by strong material sales within both the aligner and repair markets. In reviewing our core products, printers, materials, and parts manufacturing each delivered solid double-digit growth compared to the prior year period. Moving to slide 16. Within our segments, Industrial Solutions' revenue totaled $45.4 million, an increase of 1.6% year-over-year. Industrial Solutions saw continued strength in our largest end market, Aerospace and Defense, which delivered over 20% year-over-year growth. This was complemented by a return to growth in the automotive and semiconductor markets and partially offset by lower demand in certain regional areas due to the conflict in the Middle East, primarily impacting our jewelry business. Health care solutions revenue of $50.1 million grew 21% year-over-year, surpassing industrial solutions as the larger segment this quarter. Growth was driven by strong performance across both dental and medtech. Health care revenue included an increase in both printer and material sales and strong demand in health care parts, particularly for orthopedic medical implants. Now moving to slide 17. In the first quarter, non-GAAP gross margin was 36.1%, up 6 percentage points from the prior year period when adjusting for software divestitures. Non-GAAP gross margin performance reflects improved manufacturing absorption from higher production and sales volume in the quarter, along with a favorable consumables mix, improved printer margins, and the benefits of our cost reduction initiatives. Moving to slide 18. We continue to demonstrate strong cost management discipline as we move into 2026. Two key areas were the primary contributors to our operating expense performance in the first quarter. First, we continue to realize incremental savings from the cost reduction initiatives executed throughout last year. Through the end of the first quarter, we have delivered more than $55 million in annualized cost savings. We expect to complete our defined cost reduction and efficiency programs by the end of the second quarter, marking the conclusion of a six-quarter focused effort to optimize our cost structure. Additionally, the company has made significant investments in R&D over the past several years to both refresh our product portfolio and advance our core technologies across both polymers and metals. The elevated R&D investments as a percentage of sales have led to the successful launch of our new jewelry printer, the MJP 300W+, our new denture printer and materials with the NEXTM 300, and meaningful upgrades to our mid- and large-frame D&P metal printer portfolio. As these launches are now substantially complete, we expect to transition to a more balanced level of R&D spending with a focus on targeted enhancements to further advance our portfolio innovation. Reflecting on these actions, first quarter non-GAAP operating expenses were $36.6 million, down 35% or $20.1 million from the prior year period when adjusting for the software divestitures. On a sequential basis, non-GAAP operating expenses declined 11% or $4.3 million. Looking ahead, we expect operating expenses to remain largely stable through the remainder of the year, with normal seasonal fluctuations across quarters. Now turning to slide 19 to finalize the P&L. First quarter adjusted EBITDA was positive $2.1 million. This represents an improvement of $26 million year-over-year, or $28.2 million when adjusted for divestitures. This increase was driven by higher sales volumes, favorable product mix, and the timing of seasonal cost, with the majority of improvement coming from operating expense reductions from cost savings initiatives. There were several offsetting factors that were reflected in overall adjusted EBITDA performance, including supply chain disruptions related to the conflict impacting the Middle East, an isolated business disruption affecting a key customer that has since been resolved, and modest FX and tariff impacts to our bottom line. In aggregate, these headwinds and tailwinds were largely offsetting, resulting in minimal impact to our adjusted EBITDA for the quarter. Moving to earnings per share, first quarter non-GAAP loss per share was $0.01, an improvement from a loss of $0.21 in the prior year period. Now turning to slide 20 for review of the balance sheet. We entered the quarter with $86.5 million in total cash, including $85.1 million in cash and cash equivalents and $1.4 million in restricted cash. We have $3.9 million of debt coming due in the fourth quarter of 2026, with the remaining $92 million maturing in 2030. As we move into the second quarter, our focus is on maintaining a disciplined and efficient cost structure, while remaining flexible to support strategic investments within the business and key growth markets. This positions us well to capitalize on accelerating growth opportunities ahead. Lastly, I'll turn to slide 21 for an update on the company's Q2 outlook. Following a strong first quarter, we expect demand to remain healthy through the balance of the year with customary seasonality in the second quarter. In line with these trends and given our current macroeconomic environment, we are taking a measured approach to our outlook and guiding second quarter revenue to a range of $93 to $95 million, with an adjusted EBITDA loss in the range of $2 to $4 million. With the completion of the review of our first quarter financials, I will now turn the call back over to Jeff for closing remarks.

Thank you, Phyllis. In summary, we had a strong first quarter performance across our key growth markets, driven by our leading direct metal printing capabilities across printer sales, parts production, and materials. Additionally, we had one of our most successful new product launches with our next jetted denture solution, which is now being rolled out in Europe two months ahead of plan. Our manufacturing capacity expansion of Littleton remains on track and will help support the growth of our aerospace and defense business. We expect to build on our top-line growth momentum in key markets over the coming quarters while maintaining strong cost discipline to achieve break-even adjusted EBITDA or better for the full year. We thank you for your time and continued support of 3D systems. We'll now open the line for questions. Operator?

Thank you. We'll now be conducting a question and answer session. If you'd like to be placed in the question queue, please press star 1 on your telephone keypad. A confirmation tone will indicate your line is in the question queue. You may press star 2 if you'd like to remove your question from the queue. For participants using speaker equipment, it may be necessary to pick up your handset before pressing star one. Our first question today is coming from Greg Pound from Craig Hallam. Your line is now live.

Yeah, thanks. Good morning, everybody. Jeff, I don't want to put words in your mouth, but you struck me as at least your tone was, you know, a little bit more positive than it has been in recent years. So I'm just kind of curious as you're sitting there, you know, looking at your own portfolio and what you've done and, you know, know just some of the industry you know green shoots that are emerging what kind of strikes you as as most important as kind of a lever to re-accelerate the growth profile here yeah greg

so so in terms of tone yeah you're absolutely correct i i think it was you know it was it was a bet a few years back that we we should hang on to r&d spend and refresh our portfolio and it turned out it was a good bet we we refreshed our entire product line in time for 3d printing to start regaining traction in the market so i'm really pleased about that now look it's it is you described it right it's green shoots it's it's early days but we but what gives me comfort is it's broad you know it's it's broad across the markets that are really embracing 3d printing and and for us i think for everyone dental is a big driver it's like it's going custom it's going 3D printing. MedTech is really expanding nicely, especially in the orthopedic space. And then you've got aerospace and defense, which really benefits from 3D printing. So I look at that and say it spans healthcare and industrial, primarily on the high reliability markets. 3D printing is really starting to take off. And look, the world's still a scary place. There's a lot of stuff going on, but I feel better than I felt, Greg, in two or three years. And it's just in time for our new products to be hitting the market. So I like that. We need to see continued traction. I think healthcare, you know, really much more predictable because a lot of these are non-optional or, you know, high impact procedures that impact quality of people's lives. So I wasn't surprised to see that become our largest segment in the quarter. I think it'll be neck and neck now with industrial because of aerospace and defense. Aerospace and defense broadly across many markets in that sector is really, really now understanding the benefits of 3D printing. They can make parts out of very exotic materials that have been difficult to fabricate, very, you know, very expensive parts to fabricate. They can print them at high efficiency. The technology's got to the point where it's not only easy to use, but it's cost effective. And they're really figuring out how to do it. Now, the leaders in that space figured it out a few years back. Okay. So you look at like rocketry you know you look at rockets that are going into space those guys are heavy users of this now they were right at the leading edge now it's catching on across all of aerospace and defense funded by big budgets as well and as that as that sector expands so yes i feel i feel good about things you know for the first time in a few years it is wonderful to see new products hitting the market right at the right moment and you know i i pray that the world continues to uh to be at least stable, hopefully improve. And with that, in any scenario, our healthcare business should continue to grow nicely, and our industrial business should continue to gain strength. So I feel good about that across the board, Greg. Yeah, okay. And just in terms of the Q2

revenue outlook specifically, you know, normal seasonal trends would suggest a sequential increase. It sounds like you actually had one of your bigger customers that was maybe a little bit of a shortfall in Q1, so I guess you should presumably see improvement. Anything that was, I don't know, pulled forward or anything to note, or should we maybe focus more on your comment of taking a measured approach to the guide at this point? No, it's the latter. Yeah, we didn't pull

things forward, Greg. There were no pull forwards. Now, there was an uptick in demand in certain sectors in Q1 above what we had forecast, and that's really what drove the overachievement on revenue versus guidance, because it was just legitimately an uptick in demand. There were no pull forwards. So the seasonality aspect in our business, as dental particularly gets bigger and orthopedics, what you find is people don't start procedures in the spring, because generally they're planning to go on vacation and nobody, when they get out of school or they're anticipating family vacations, you see a distinct drop-off in anything that's optional. So whether it's straightening your teeth or it's having an optional surgery, you tend to live with it because like orthopedic surgeries, people are often laid up for months and they don't want to do that in a nice weather period. So Q2 is becoming a little bit more of a seasonal dip for us because of the size of our healthcare business. Other than that, nothing unexpected. We're also, I would tell you, Greg, trying to not get out over our skis in terms of excitement. We just want to stay measured because, again, the world is just so darn volatile. This issue in the Middle East, it probably continues to drive increased defense and aerospace spending, but it's made logistics a nightmare in many cases, just getting printers and parts and materials to customers. Certainly, if those customers are in the Middle East, which we have some customers there, it's been a real problem. But it's screwed up logistics around the world in part. So we just want to be cautious and say, look, the world's getting better. Let's not get out in front of ourselves, and let's keep the guidance realistic.

Yeah, okay. And last one, clearly the bright spot was getting back to EBITDA profitability in the quarter. So congrats on that. But, Phyllis, I think what I heard was, you know, stable OPEX, you know, which presumably means maybe OPEX is in towards this level that you reported in Q1, which was quite a bit lower sequentially than at least what I think we thought it would be. But, you know, it kind of implies, you know, EBITDA kind of break-even-ish, you know, based on the Q2 guide for the first half. I'm having a hard time thinking or figuring out how you won't be nicely EBITDA positive for the year just given normal, you know, seasonality trends in the second half. So kind of the same question as the revenue, but was there anything, you know, that maybe positively impacted, you know, Q1? Because, you know, obviously that came in quite a bit better than expectations.

Yeah, I mean, for us, Greg, I think what you really have to focus on is product mix, too, in the quarter. I did mention in the script about our expenses being a little bit lower than you'll typically see as you look out the rest of the year. We had some timing just of expenses that, you know, were in our favor for the quarter. It wasn't significant, but it was noteworthy, and we took that into effect as we go into Q2 and Q3. On the mix side, again, just looking at consumables, we have heavy printer sales that are coming in. Jeff talked about the increase in our metal printer sales. Those mixes will really drive sort of margin and overall performance. So you'll see us pretty consistent throughout the year as we aim towards that goal of adjusted EBITDA break-even. But look at, you know, again, more stabilization of that op-ax, and product mix quarter-quarter will really drive that end result.

Okay. Fair enough. Appreciate the thoughts. Thanks.

Thank you.

Thanks, Greg.

Thank you. As a reminder, that's star one to be placed into question queue. Our next question is coming from Troy Jensen from Cancer Prince General. Your line is now live.

Hey, thanks for letting me in. Sorry I jumped in a little late. Maybe I apologize if I'm asking stuff that's been addressed here. But, Jeff, for you, can you just give me an update on the healthcare business, personalized healthcare versus dental? You know, in the year-over-year growth, was that primarily personalized health care, or is it big dental kind of driving that also?

So, Troy, I'll let Phil's put some numbers to it, but I can tell you both were strong. The personalized health care, and that really we call it now med tech, it encompasses all of the surgical planning work we do with surgeons, surgical guide production, and implants, okay, implants into the body, So spinal and other bone or orthopedic implants, it covers all of that. That was good business this quarter. There was disruption in one customer, which cost us a little bit. And, you know, we expect that to kind of rebound now that that's behind them. But it was very good business. It continues to be, I expect, a double-digit grower year on year organically. And what's driving that, Troy, is we've gotten the response time to surgical requests down now to the point and the cost down to the point where we can turn things around fast enough to participate in trauma. So folks that are in car accidents and other emergent issues, we can respond to these folks within a matter of a couple of days now and really, really come to their aid. So that's expanding the market for us. The other real growth driver in the medtech part of it, Troy, is oncology, so the treatment of bone cancer. So planning these complex surgeries to remove the tumor and now to replace the bone using our printed peak implants, that's going to be a real growth aspect of our business. So on the medtech side of health care, nice, consistent, double-digit grower. We continue to invest nicely for new applications there. We have some great new technology for bone implants that I think is really taking root fast. On the dental side, we've got our traditional markets in alignment and repair. And on the repair side of that, the great news for us late last year is we got trademark approval finally in the United States. That Vertex material has been approved in Europe for a long, long time, and the trademark's been fine. In the U.S. there was a trademark dispute, so it wasn't a technical issue, it was a trademark issue. We got that resolved in the fourth quarter, and now you see that material stream coming online for repairing teeth. And then, of course, the straightening of teeth is always a good business. Last year was pretty tough for them in the first half, so we see a nice stabilization of that business and a return to some modest growth. So I feel good about all parts of our health care business. And it's because of the regulatory nature, Troy, as you know, it's hard to get in. And once you're in, there's a limited number of people that can fulfill those requests. So we'd love that business, and we continue to invest in it.

All right. And then just another question here, specific to, like, metal additive parts. Where are you guys kind of expanding in that category? I believe you're looking to expand a footprint in Littleton or something, but touch on it if you could.

Yes, right, Troy. We're adding another 80,000 square feet on out there to a building adjacent to the one we have. The building we have today has been largely, historically, it was healthcare, including healthcare parts manufacturing. Over time, there's been pressure to add industrial manufacturing there, too, and so we said, you know, we kind of hit that pivot point and said, let's get the building next door and we'll turn it into an industrial part-making facility. It leverages the quality systems we already have in health care, and it's coming along nicely. So we'll have a grand opening of that building anticipated at the end of July, beginning of August, sometime late summer. We'll have a grand opening of the building. That will be dedicated to part manufacturing, and what we expect right now is that will be aerospace. The parts we're focused on, Troy, are these very high-end, difficult materials that our printers are really good for. So they're titanium, zirconium, nickel-based materials, and copper nickel alloys for the Navy. So the nickel-based alloys are primarily for propulsion, so for aircraft and rocket propulsion, the coppers for the Navy, and you've got titanium and other lightweight materials for satellites and other flight systems for drones and things. So there's more demand than we can handle in our current facility. We're expanding that, and we'll be adding printers to that facility over time as we move through the second half of the year.

All right, guys, thanks, and keep up the good work.

Thanks, Troy.

Thank you. Once again, as a reminder, if you'd like to be placed in the question queue, please press star 1 at this time. One moment, please, while we poll for further questions. We've reached the end of our question and answer session. I'd like to turn the floor back over for any further closing comments to Dr. Jeff Graves.

Thanks, Kevin. And listen, thanks, everyone, for joining the call today. I appreciate the time, and we'll look very forward to updating you again next quarter. Have a great day and a great start to this summer.

Thank you. That does conclude today's teleconference and webcast. You may disconnect your line at this time, and have a wonderful day. We thank you for your participation today.