Scandium International Mining Corp 10-Q for FY2023 Q2
Scandium International Mining Corp. (SCYYF)
About this 10-Q
Scandium International Mining Corp filed this 10-Q on August 10, 2023, covering the quarter ended June 30, 2023 (FY2023 Q2).
Headline figures
Quarter ended June 30, 2023, as reported in this filing, compared with the same period a year earlier where the filing states it.
- Net loss
- $129.76K
- compared with net income of $28.58K a year earlier
UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549
FORM
For the quarterly period ended
For the transition period from _________ to __________________
(Commission File Number)
(Exact name of registrant as specified in its charter)
|
British Columbia, |
|
|
(State or other jurisdiction |
(IRS Employer |
|
of incorporation or organization) |
Identification No.) |
(Address of principal executive offices) (Zip Code)
(
(Registrant’s telephone number, including area code)
N/A
(Former name, former address and former fiscal year, if changed since last report)
Securities registered pursuant to Section 12(b) of the Act: None
Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.
Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files).
Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company, or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company,” and “emerging growth company” in Rule 12b-2 of the Exchange Act.
|
Large accelerated filer ☐ |
Accelerated filer ☐ |
|
Smaller reporting company |
|
Emerging growth company |
If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐
Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes
Indicate the number of shares outstanding of each of the registrant’s classes of common stock, as of the latest practicable date: As of August 10, 2023, the registrant’s outstanding common stock consisted of
PART I. FINANCIAL INFORMATION
Item 1. Financial Statements
UNAUDITED CONDENSED INTERIM CONSOLIDATED FINANCIAL STATEMENTS
SIX MONTHS AND THREE MONTHS ENDED JUNE 30, 2023
|
Scandium International Mining Corp. |
||||
|
CONDENSED INTERIM CONSOLIDATED BALANCE SHEETS |
||||
|
(Expressed in US Dollars) (Unaudited) |
||||
|
As at: |
June 30, 2023 |
December 31, 2022 |
||||||
|
ASSETS |
||||||||
|
Current |
||||||||
|
Cash |
$ | $ | ||||||
|
Prepaid expenses and receivables |
||||||||
|
Total Current Assets |
||||||||
|
Reclamation bond (Note 3) |
||||||||
|
Mineral property interests (Note 3) |
||||||||
| Total Assets | $ | $ | ||||||
|
LIABILITIES AND SHAREHOLDERS’ EQUITY |
||||||||
|
Current |
||||||||
|
Accounts payable and accrued liabilities |
$ | $ | ||||||
|
Accounts payable with related parties (Note 4) |
||||||||
|
Derivative liability – warrants (Note 2 and 5) |
||||||||
|
Total Liabilities |
||||||||
|
Shareholders’ Equity |
||||||||
|
Capital stock (Note 5) (Authorized: |
||||||||
|
Treasury stock (Note 6) ( |
( |
) |
( |
) |
||||
|
Additional paid in capital (Note 5) |
||||||||
|
Accumulated other comprehensive loss |
( |
) |
( |
) |
||||
|
Deficit |
( |
) |
( |
) |
||||
|
Total Shareholders’ Equity |
||||||||
|
Total Liabilities and Shareholders’ Equity |
$ | $ | ||||||
Nature and continuance of operations (Note 1)
The accompanying notes are an integral part of these condensed interim consolidated financial statements.
|
Scandium International Mining Corp. |
|||||
|
CONDENSED INTERIM CONSOLIDATED STATEMENTS OF OPERATIONS AND COMPREHENSIVE INCOME (LOSS) |
|||||
|
(Expressed in US Dollars) (Unaudited) |
|||||
|
Three months ended June 30, 2023 |
Three months ended June 30, 2022 |
Six months ended June 30, 2023 |
Six months ended June 30, 2022 |
|||||||||||||
| EXPENSES | ||||||||||||||||
|
Amortization |
$ | $ | $ | $ | ||||||||||||
|
Consulting (Note 4) |
||||||||||||||||
|
Exploration (recovery) |
( |
) | ( |
) | ||||||||||||
|
General and administrative |
||||||||||||||||
|
Insurance |
||||||||||||||||
|
Professional fees |
||||||||||||||||
|
Salaries and benefits |
||||||||||||||||
|
Travel |
||||||||||||||||
| ( |
) |
( |
) |
( |
) |
( |
) | |||||||||
|
Foreign exchange gain (loss) |
( |
) | ( |
) | ( |
) | ||||||||||
|
Accruals reversal (Note 8) |
||||||||||||||||
|
Interest income |
||||||||||||||||
|
Unrealized loss on derivative liability – warrants gain (Note 2) |
( |
) | ( |
) | ||||||||||||
|
Income (loss) and comprehensive income (loss) for the period |
$ | ( |
) | $ | $ | $ | ||||||||||
|
Basic and diluted income (loss) per common share |
$ | $ | ( |
) |
$ | $ | ( |
) |
||||||||
|
Weighted average number of common shares outstanding – basic and diluted |
||||||||||||||||
The accompanying notes are an integral part of these condensed interim consolidated financial statements.
|
Scandium International Mining Corp. CONDENSED INTERIM CONSOLIDATED STATEMENTS OF CASH FLOWS (Expressed in US Dollars) (Unaudited) |
|
6-month period ended |
June 30, 2023 |
June 30, 2022 |
||||||
|
CASH FLOWS FROM OPERATING ACTIVITIES |
||||||||
|
Income for the period |
$ | $ | ||||||
|
Items not affecting cash: |
||||||||
|
Amortization |
||||||||
|
Stock-based compensation |
||||||||
|
Accrual reversal |
( |
) | ||||||
|
Unrealized gain (loss) on derivative liability - warrants |
( |
) |
||||||
|
Unrealized gain on foreign exchange |
|
( |
) | |||||
|
Changes in non-cash working capital items: |
||||||||
|
Decrease (increase) in prepaid expenses and receivables |
( |
) | ||||||
|
Decrease in accounts payable, accrued liabilities and accounts payable with related parties |
( |
) |
( |
) | ||||
| ( |
) |
( |
) |
|||||
|
CASH FLOWS FROM FINANCING ACTIVITIES |
||||||||
|
Common shares issued |
||||||||
|
Share issue costs |
( |
) | ||||||
|
Options exercised for common shares |
||||||||
|
Change in cash during the period |
( |
) | ||||||
|
Cash, beginning of period |
||||||||
|
Cash, end of period |
$ | $ | ||||||
| 2023 | 2022 | |||||||
| Cash paid during the 6-month period for interest | $ | $ | ||||||
| Cash paid during the 6-month period for taxes | $ | $ | ||||||
|
During the period ended June 30, 2022, the Company issued |
The accompanying notes are an integral part of these condensed interim consolidated financial statements.
|
Scandium International Mining Corp. |
|||||||
|
CONDENSED INTERIM CONSOLIDATED STATEMENTS OF CHANGES IN SHAREHOLDERS’ EQUITY (DEFICIENCY) |
|||||||
|
(Expressed in US Dollars) (Unaudited) |
|||||||
|
Number of Shares |
Capital Stock |
Additional Paid in Capital |
Treasury Stock |
Accumulated Other Comprehensive Loss |
Deficit |
Total Shareholders’ Equity (Deficiency) |
||||||||||||||||||||||
|
Balance, December 31, 2021 |
$ | $ | $ | ( |
) | $ | ( |
) | $ | ( |
) | $ | ( |
) | ||||||||||||||
|
Income for the three months |
- | |||||||||||||||||||||||||||
|
Balance, March 31, 2022 |
$ | $ | $ | ( |
) | $ | ( |
) | $ | ( |
) | $ | ( |
) | ||||||||||||||
|
Stock-based compensation |
- | |||||||||||||||||||||||||||
|
Options exercised |
( |
) | ||||||||||||||||||||||||||
|
Private placement net of share issuance costs |
||||||||||||||||||||||||||||
|
Derivative liability |
- | ( |
) | ( |
) | |||||||||||||||||||||||
|
Income for the three months |
- | |||||||||||||||||||||||||||
|
Balance, June 30, 2022 |
$ | $ | $ | ( |
) | $ | ( |
) | $ | ( |
) | $ | ||||||||||||||||
|
Stock-based compensation |
- | - | ||||||||||||||||||||||||||
|
Income for the three months |
- | |||||||||||||||||||||||||||
|
Balance, September 30, 2022 |
$ | $ | $ | ( |
) | $ | ( |
) | $ | ( |
) | $ | ||||||||||||||||
|
Stock-based compensation |
- | - | ||||||||||||||||||||||||||
|
Share issue costs |
- | ( |
) | ( |
) | |||||||||||||||||||||||
|
Income for the three months |
- | |||||||||||||||||||||||||||
|
Balance, December 31, 2022 |
$ | $ | $ | ( |
) | $ | ( |
) | $ | ( |
) | $ | ||||||||||||||||
|
Stock-based compensation |
- | - | ||||||||||||||||||||||||||
|
Income for the three months |
- | |||||||||||||||||||||||||||
|
Balance, March 31, 2023 |
$ | $ | $ | ( |
) | $ | ( |
) | $ | ( |
) | $ | ||||||||||||||||
|
Stock-based compensation |
- | |||||||||||||||||||||||||||
|
Income for the three months |
- | ( |
) | ( |
) | |||||||||||||||||||||||
|
Balance, June 30, 2023 |
$ | $ | $ | ( |
) | $ | ( |
) | $ | ( |
) | $ | ||||||||||||||||
The accompanying notes are an integral part of these condensed interim consolidated financial statements.
|
Scandium International Mining Corp. |
|
NOTES TO THE CONDENSED INTERIM CONSOLIDATED FINANCIAL STATEMENTS |
|
June 30, 2023 |
|
(Expressed in US Dollars) (Unaudited) |
|
1. |
NATURE AND CONTINUANCE OF OPERATIONS |
Scandium International Mining Corp. (the “Company”) is a specialty metals and alloys company focusing on scandium and other specialty metals.
The Company was incorporated under the laws of the Province of British Columbia, Canada in 2006. The Company currently trades on the Toronto Stock Exchange (TSX) under the symbol “SCY”.
The Company’s focus is on the exploration and evaluation of its specialty metals assets, specifically the Nyngan scandium deposit located in New South Wales, Australia, The Company is an exploration stage company and anticipates incurring significant additional expenditures prior to production and any and all of its properties.
These condensed interim consolidated financial statements have been prepared on a going concern basis that contemplates the realization of assets and discharge of liabilities at their carrying values in the normal course of business for the foreseeable future. These financial statements do not reflect any adjustments that may be necessary if the Company is unable to continue as a going concern.
The Company currently earns no operating revenues and will require additional capital in order to advance the Nyngan property. The Company’s ability to continue as a going concern is uncertain and is dependent upon the generation of profits from mineral properties, obtaining additional financing and maintaining continued support from its shareholders and creditors. These are material uncertainties that raise substantial doubt about the Company’s ability to continue as a going concern. In the event that additional financial support is not received, or operating profits are not generated, the carrying values of the Company’s assets may be adversely affected.
The outbreak of COVID-19 and political upheavals in various countries have caused significant volatility in commodity prices. While these effects are expected to be temporary, the duration of the business disruptions internationally and related financial impact cannot be reasonably estimated at this time.
|
2. |
BASIS OF PRESENTATION |
Basis of presentation
The accompanying unaudited condensed interim consolidated financial statements have been prepared in accordance with the rules and regulations of the Securities and Exchange Commission (“SEC”). The condensed interim consolidated financial statements include the consolidated accounts of the Company and its wholly owned subsidiaries with all significant intercompany transactions eliminated. In the opinion of management, all adjustments necessary for a fair statement of the condensed interim consolidated balance sheets, results of operations and comprehensive loss and cash flows for the interim periods have been made. Certain information and footnote disclosures normally included in the condensed interim consolidated financial statements prepared in accordance with generally accepted accounting principles of the United States of America (“US GAAP”) have been condensed or omitted pursuant to such SEC rules and regulations. These condensed interim consolidated financial statements should be read in conjunction with the audited consolidated financial statements for the year ended December 31, 2022, and with our Annual Report on Form 10-K filed with the SEC on March 7, 2023. Operating results for the six-month period ended June 30, 2023, may not necessarily be indicative of the results for the year ending December 31, 2023.
These unaudited condensed interim consolidated financial statements include the accounts of the Company and its wholly owned subsidiaries, EMC Metals USA Inc., Scandium International Mining Corp., Norway AS, SCY Exploration Finland Oy, and EMC Metals Australia Pty Ltd. (“EMC-A”).
Use of estimates
The preparation of unaudited condensed interim consolidated financial statements in conformity with US GAAP requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and the disclosure of contingent assets and liabilities at the date of the financial statements and the reported amounts of expenses during the reporting period. The Company regularly evaluates estimates and assumptions related to the deferred income tax asset valuations, asset impairment, stock-based compensation, derivative liabilities and loss contingencies. The Company bases its estimates and assumptions on current facts, historical experience, and various other factors that it believes to be reasonable under the circumstances. The actual results experienced by the Company may differ materially and adversely from the Company’s estimates. To the extent there are material differences between estimates and the actual results, future results of operations will be affected.
The Company considers itself to be an exploration stage company and will consider the transition to development stage after it receives funding to begin mine construction, and board approval.
Fair value of financial assets and liabilities
The Company measures the fair value of financial assets and liabilities based on US GAAP guidance which defines fair value, establishes a framework for measuring fair value, and expands disclosures about fair value measurements.
The Company classifies financial assets and liabilities as held-for-trading, available-for-sale, held-to-maturity, loans and receivables or other financial liabilities depending on their nature. Financial assets and financial liabilities are recognized at fair value on their initial recognition, except for those arising from certain related party transactions which are accounted for at the transferor’s carrying amount or exchange amount.
|
Scandium International Mining Corp. |
| NOTES TO THE CONDENSED INTERIM CONSOLIDATED FINANCIAL STATEMENTS |
|
June 30, 2023 |
|
(Expressed in US Dollars) (Unaudited) |
|
2. |
BASIS OF PRESENTATION (cont’d…) |
Financial assets and liabilities classified as held-for-trading are measured at fair value, with gains and losses recognized in net income. Financial assets classified as held-to-maturity, loans and receivables, and financial liabilities other than those classified as held-for-trading are measured at amortized cost, using the effective interest method of amortization. Financial assets classified as available-for-sale are measured at fair value, with unrealized gains and losses being recognized as other comprehensive income until realized, or if an unrealized loss is considered other than temporary, the unrealized loss is recorded in income.
Financial instruments, including cash, receivables, reclamation bond, accounts payable and accrued liabilities, and accounts payable with related parties are carried at amortized cost, which management believes approximates fair value due to the short-term nature of these instruments. Derivative liabilities are recorded at fair value, and are financial liabilities classified as held-for-trading.
The Company has no leases in the six months ending June 30, 2023. Short term lease expenses totaled $ during the six months ended June 30, 2023, and $
The Company’s warrants have an exercise price in Canadian dollars while the Company’s functional currency is US dollars. Therefore, in accordance with ASU 815 – Derivatives and Hedging, the warrants are presented as derivative liabilities. This liability value has no effect on the cash flow of the Company and does not represent a cash payment of any kind. The derivative liability is a result of the uncertainty associated with US dollar cash flows as a result of the underlying foreign currency fluctuations between the exercise price in Canadian dollars and the Company’s functional currency of US dollars.
The following table presents information about the assets and liabilities that are measured at fair value on a recurring basis as at June 30, 2023 and indicates the fair value hierarchy of the valuation techniques the Company utilized to determine such fair value. In general, fair values determined by Level 1 inputs utilize quoted prices (unadjusted) in active markets for identical assets. Fair values determined by Level 2 inputs utilize data points that are observable such as quoted prices, interest rates and yield curves. Fair values determined by Level 3 inputs are unobservable data points for the asset or liability, and included situations where there is little, if any, market activity for the asset:
|
June 30, |
Quoted Prices |
Significant Other |
Significant |
|||||||||||||
|
Liabilities: |
||||||||||||||||
|
Derivative liability - warrants |
$ | ( |
) |
$ | $ | $ | ( |
) |
||||||||
Recently Adopted and Recently Issued Accounting Standards
There are no recently issued accounting standards updates that are currently expected to have a material impact on the Company.
|
Scandium International Mining Corp. |
|
NOTES TO THE CONDENSED CONSOLIDATED FINANCIAL STATEMENTS |
|
June 30, 2023 |
|
(Expressed in US Dollars) (Unaudited) |
|
3. |
MINERAL PROPERTY INTERESTS |
|
June 30, 2023 |
Scandium and other |
|||
|
Balance, June 30, 2023, December 31, 2022 |
$ | |||
Title to mineral property interests involves certain inherent risks due to the difficulties of determining the validity of certain claims as well as the potential for problems arising from the frequently ambiguous conveyancing history characteristic of many mineral property interests. The Company has investigated title to all its mineral property interests and, to the best of its knowledge, title to all of its properties is in good standing.
SCANDIUM PROPERTIES
Nyngan, New South Wales Property
The Company holds a
Royalties attached to the Nyngan property include a
Honeybugle property, Australia
The Company holds a
Kiviniemi Scandium Property Finland
In August 2018, the Company was granted an Exploration License for the Kiviniemi Scandium Property in central Finland from the Finnish regulatory body governing mineral exploration and mining in Finland. As at June 30, 2023 the Company has a reclamation bond of $
|
4. |
RELATED PARTY TRANSACTIONS |
During the 6-month period ended June 30, 2023, the Company expensed $
During the 6-month period ended June 30, 2022, the Company reversed $
During the 6-month period ended June 30, 2023, the Company expensed a consulting fee of $ to one of its directors. During the 6-month period ended June 30, 2022, the Company expensed a consulting fee of $
As at June 30, 2023, the Company owed $
|
5. |
CAPITAL STOCK AND ADDITIONAL PAID IN CAPITAL |
The holders of common stock are entitled to vote for each share held. There are no restrictions that limit the Company’s ability to pay dividends on its common stock. The Company has declared any dividends since incorporation. The Company’s common stock has
Common Stock Issuances
During the six-month period ended June 30, 2022, the Company issued
During the quarter ended June 30, 2022, the holders of
|
Scandium International Mining Corp. |
|
NOTES TO THE CONDENSED CONSOLIDATED FINANCIAL STATEMENTS |
|
June 30, 2023 |
|
(Expressed in US Dollars) (Unaudited) |
|
5. |
CAPITAL STOCK AND ADDITIONAL PAID IN CAPITAL (cont’d…) |
Warrants
A summary of warrant activity for the six-month period ended June 30, 2023, are as follows:
|
Number of warrants |
Exercise price |
Expiry date |
||||||||||
|
Outstanding December 31, 2021 |
- | |||||||||||
|
Granted 2022 |
CAD$ |
May 20 - June 14, 2027 |
||||||||||
|
Outstanding December 31, 2022, and June 30, 2023 |
CAD$ | |||||||||||
A fair value of the derivative liability of $
|
June 30, 2023 |
Issuance date |
|||||||
|
Exercise price |
CAD$ | CAD$ | ||||||
|
Stock price |
CAD$ | CAD$ | ||||||
|
Expected term (in years) |
||||||||
|
Expected dividend yield |
||||||||
|
Expected stock price volatility |
% |
% |
||||||
|
Risk-free interest rate |
% |
% |
||||||
Stock Options
The Company established a stock option plan (the “Plan”) under which it is authorized to grant options to executive officers and directors, employees and consultants and the number of options granted under the Plan shall not exceed
Stock option transactions are summarized as follows:
|
Stock Options |
||||||||
|
Number |
Weighted average exercise price in Canadian $ |
|||||||
|
Outstanding, December 31, 2021 |
$ | |||||||
|
Granted |
||||||||
|
Exercised |
( |
) |
||||||
|
Expired |
( |
) |
||||||
|
Outstanding, December 31, 2022 |
||||||||
|
Expired |
( |
) | ||||||
|
Outstanding, June 30, 2023 |
$ | |||||||
|
Number currently exercisable |
$ | |||||||
|
Scandium International Mining Corp. |
|
NOTES TO THE CONDENSED CONSOLIDATED FINANCIAL STATEMENTS |
|
June 30, 2023 |
|
(Expressed in US Dollars) (Unaudited) |
|
5. |
CAPITAL STOCK AND ADDITIONAL PAID IN CAPITAL (cont’d…) |
As at June 30, 2023, incentive stock options were outstanding as follows:
|
Number of Options Outstanding |
Number of Options Exercisable |
Exercise Price in Canadian $ |
Expiry Date |
||||||||||
|
Options |
|||||||||||||
|
|
|||||||||||||
|
|
|||||||||||||
|
|
|||||||||||||
|
|
|||||||||||||
|
|
|||||||||||||
|
|
|||||||||||||
|
|
|||||||||||||
|
|
|||||||||||||
As at June 30, 2023 the Company’s outstanding and exercisable stock options have an aggregate intrinsic value of $ (December 31, 2022 - $).
Stock-based compensation
During the 6-month period ended June 30, 2023, the Company recognized as part of salaries and benefits, stock-based compensation of $
The weighted average fair value of the options granted in the period ended June 30, 2023, was (June 30, 2022 – C$
The fair value of all compensatory options granted is estimated on grant date using the Black-Scholes option pricing model. The weighted average assumptions used in calculating the fair values of stock options granted in the 6-month period ended June 30 are as follows:
|
2023 |
2022 |
|||||||
|
Risk-free interest rate |
N/A | % | ||||||
|
Expected life (in years) |
N/A | |||||||
|
Volatility |
N/A | % | ||||||
|
Forfeiture rate |
N/A | N/A | ||||||
|
Dividend rate |
N/A | N/A | ||||||
|
6. |
TREASURY STOCK |
|
Number |
Amount |
|||||||
|
Treasury shares, June 30, 2023, and December 31 2022 |
$ | |||||||
Treasury shares comprise shares of the Company which cannot be sold without the prior approval of the TSX.
|
Scandium International Mining Corp. |
|
NOTES TO THE CONDENSED CONSOLIDATED FINANCIAL STATEMENTS |
|
June 30, 2023 |
|
(Expressed in US Dollars) (Unaudited) |
|
7. |
SEGMENTED INFORMATION |
The Company’s mineral properties are located in Australia. The Company’s capital assets’ geographic information is as follows:
|
June 30, 2023 |
Australia |
United States |
Total |
|||||||||
|
Mineral property interests |
||||||||||||
| $ | $ | $ | ||||||||||
|
December 31, 2022 |
Australia |
United States |
Total |
|||||||||
|
Mineral property interests |
||||||||||||
| $ | $ | $ | ||||||||||
|
8. |
ACCRUALS REVERSAL |
During the six-month period ended June 30, 2022, the Company recognized a recovery on historical accruals it has recorded totaling $
Item 2. Management’s Discussion and Analysis of Financial Condition and Results of Operations
The following discussion of the operating results, corporate activities and financial condition of Scandium International Mining Corp. (hereinafter referred to as “we”, “us”, “Scandium International”, “SCY”, or the “Company”) and its subsidiaries provides an analysis of the operating and financial results between December 31, 2022, and June 30, 2023, and a comparison of the material changes in our results of operations and financial condition between the three and six month periods ended June 30, 2023, and the three and six month periods ended June 30, 2022. This discussion should be read in conjunction with Management’s Discussion and Analysis of Financial Condition and Results of Operations included in our Annual Report on Form 10-K for the year ended December 31, 2022.
This discussion and analysis contain forward-looking statements that involve risks, uncertainties and assumptions. Our actual results may differ materially from those anticipated in these forward-looking statements as a result of many factors, including, but not limited to, those set forth under the heading “Risk Factors and Uncertainties” in our Annual Report on Form 10-K for the year ended December 31, 2022, and elsewhere in this Quarterly Report on Form 10-Q.
The condensed interim statements have been prepared in accordance with US Generally Accepted Accounting Principles, as required under U.S. federal securities laws applicable to the Company, and as permitted under applicable Canadian securities laws. The Company is a reporting company under applicable securities laws in Canada and the United States. The reporting currency used in our financial statements is the United States Dollar.
The information contained within this report is current as of August 10, 2023, unless otherwise noted. Additional information relevant to the Company’s activities can be found on SEDAR at www.sedar.com and on EDGAR at www.sec.gov.
Technical information in this Form 10Q, including the MD&A, has been reviewed and approved by John Thompson, a Qualified Person as defined by Canadian National Instrument 43-101 (“NI 43-101”).
Cautionary Note to U.S. Investors Regarding Reserve and Resource Estimates
The Company uses Canadian Institute of Mining, Metallurgy and Petroleum definitions for the terms “proven reserves”, “probable reserves”, “measured resources” and “indicated resources.” U.S. investors are cautioned that while these terms are recognized and required by Canadian regulations, including National Instrument 43-101 Standards of Disclosure for Mineral Projects (“NI 43-101”), the U.S. Securities and Exchange Commission (“SEC”) does not recognize them. Canadian mining disclosure standards differ from the requirements of the SEC under SEC Industry Guide 7, and reserve and resource information referenced in this Form 10-Q may not be comparable to similar information disclosed by companies reporting under U.S. standards. In particular, and without limiting the generality of the foregoing, the term “resource” does not equate to the term “reserve.” Under United States standards, mineralization may not be classified as a “reserve” unless the determination has been made that the mineralization could be economically and legally produced or extracted at the time the reserve determination is made. The SEC’s disclosure standards normally do not permit the inclusion of information concerning “measured mineral resources” or “indicated mineral resources” or other descriptions of the amount of mineralization in mineral deposits that do not constitute “reserves” by U.S. standards in documents filed with the SEC. Disclosure of “contained ounces” in a resource estimate is permitted disclosure under Canadian regulations; however, the SEC normally only permits issuers to report mineralization that does not constitute “reserves” by SEC standards as tonnage and grade without reference to unit measures. The requirements of NI 43-101 for identification of “reserves” are also not the same as those of the SEC, and reserves in compliance with NI 43-101 may not qualify as “reserves” under SEC standards.
Cautionary Note Regarding Forward-Looking Statements
Certain statements made in this Quarterly Report on Form 10-Q may constitute forward-looking statements about the Company and its business. Forward-looking statements are statements that are not historical facts and include, but are not limited to, reserve and resource estimates, estimated value of the project, projected investment returns, anticipated mining and processing methods for the project, the estimated economics of the project, anticipated scandium recoveries, production rates, scandium grades, estimated capital costs, operating cash costs and total production costs, planned additional processing work and environmental permitting. The forward-looking statements in this report are subject to various risks, uncertainties and other factors that could cause the Company's actual results or achievements to differ materially from those expressed in or implied by forward-looking statements. These risks, uncertainties and other factors include, without limitation, risks related to uncertainty in the demand for scandium and pricing assumptions; uncertainties related to raising sufficient financing to fund the Nyngan Scandium Project in a timely manner and on acceptable terms; changes in planned work resulting from logistical, technical or other factors; the possibility that results of work will not fulfill expectations and realize the perceived potential of the Company's properties; uncertainties involved in the estimation of scandium reserves and resources; the possibility that required permits may not be obtained in a timely manner or at all; the possibility that capital and operating costs may be higher than currently estimated and may preclude commercial development or render operations uneconomic; the possibility that the estimated recovery rates may not be achieved; risk of accidents, equipment breakdowns and labor disputes or other unanticipated difficulties or interruptions; the possibility of cost overruns or unanticipated expenses in the work program; risks related to projected project economics, recovery rates, and estimated NPV(“Net Present Value”) and anticipated IRR(“Internal Rate of Return”) and other factors identified in the Company's SEC filings and its filings with Canadian securities regulatory authorities. Forward-looking statements are based on the beliefs, opinions and expectations of the Company's management at the time they are made, and other than as required by applicable securities laws, the Company does not assume any obligation to update its forward-looking statements if those beliefs, opinions or expectations, or other circumstances, change.
Scandium International Corporate Overview
Scandium International is a specialty metals and alloys company focused on developing the production and sale of scandium and other specialty metals. The Company intends to utilize its know-how and, in certain instances, patented technologies to maximize opportunities in scandium and other specialty metals.
In the first half of 2023, we conducted two drill programs, one for Honeybugle and one for Nyngan, with the goal of further delineating both resources.
The Honeybugle drill program was completed in the first quarter of 2023. The drill program found Scandium enriched laterite formation defined at Woodlong prospect within the Honeybugle Exploration Licence 7977 area, where 32 vertical air core holes were drilled during first quarter 2023 in an approximately 300m x 400m area
Notable laterite intercepts included:
|
o |
28 meters of 320 ppm Sc starting at 1m (EHAC-080) |
|
o |
21 meters of 355 ppm Sc starting at 1m (EHAC-083) |
|
o |
17 meters of 454 ppm Sc starting at 1m (EHAC-084) |
|
o |
9 meters of 569 ppm Sc starting at 2m (EHAC-087) |
|
o |
11 meters of 632 ppm Sc starting at 1m (EHAC-090) |
|
o |
10 meters of 537 ppm Sc starting at 1m (EHAC-092) |
|
o |
13 meters of 500 ppm Sc starting at 2m (EHAC-094) |
|
o |
13 meters of 517 ppm Sc starting at 2m (EHAC-099) (composite of 2 intervals) |
Drillhole Location Map at Woodlong
Woodlong Laterite Assays by Sc ppm (other figure intercept length)
The laterite mineralization, consisting of both hematite and limonite, lies less than 2 meters below the surface. The laterite zone appears to thicken to both the west and south. The scandium grades are reasonably consistent within the central portion of the laterite at >300ppm Sc. The underlying saprolite zone is considerably thinner but contains reasonable grades of scandium (>200ppm Sc). Additional metallurgical testing is required on the saprolite mineralization to determine suitability for potential economic extraction.
The Nyngan drill program was completed in May 2023. The drilling program consisted of 11 drillholes at the western and northwestern edges of the already established mineral resource at the project. The drilling results better defined the boundary of the existing resource and reserve that are the foundation of the Feasibility Study in 2016 and was additive to our knowledge of how to optimize development of the project when it goes into production.
2022
During the first quarter of 2022, SCY completed an internal review of its portfolio of assets and projects. The purpose of this review was to determine the appropriate allocation of capital between the Company’s scandium activities and the recently announced initiatives on Critical Metals Recovery (CMR) and High Purity Alumina (HPA). The board decided and announced on April 18, 2022, that the best return on invested capital for its shareholders is to prioritize the Company’s portfolio of scandium assets including the Nyngan Scandium Project that already holds a mining license and to idle its CMR and HPA initiatives. As a result of the review, leadership changes were also made with the appointment of an interim CEO and CFO and a downsizing of the board to four directors.
Corporate activity during the second quarter of 2022 focused on increasing our financial strength through a non-brokered equity private placement and reducing costs. SCY raised aggregate gross proceeds of C$3,402,290 through the sale of 37,803,218 units (a “Unit”) spanning three tranches and closing dates. The aggregate proceeds exceed the C$3,000,000 placement amount originally announced to the market. Each Unit consists of one common share of the Company (a “Common Share”) and one share purchase warrant (a “Warrant”). Each Warrant will entitle the holder to acquire a Common Share at C$0.1075 for sixty (60) months from date of closing of each tranche. The net proceeds from the sale of the Units will be used towards the maintenance of the Company’s scandium minerals properties and for general and administrative expenses.
During the second and third quarters of 2022, SCY was successful in reducing corporate SG&A costs on an absolute and ongoing basis including reversing over $1 million in accruals during the first nine months of 2022 and achieving positive working capital. Management has implemented a plan to reduce annual ongoing expenses to $500,000 or less and as part of the plan the CEO and CFO have agreed to forgo cash compensation in order to reduce expenses.
During the third quarter of 2022, we filed a new mine lease application to re-establish the original Mining License and give access to the full scandium resource at Nyngan. The application is pending with governmental authorities.
Background
The Company was formed in 2006, under the name Golden Predator Mines Inc. As part of a reorganization and spin-out of the Company’s precious metals portfolio in March 2009, the Company changed its name to EMC Metals Corp. In order to reflect our emphasis on mining for scandium minerals, effective November 19, 2014, we changed our name to Scandium International Mining Corp. The Company currently trades on the Toronto Stock Exchange under the symbol “SCY”.
Our focus of operations is the exploration and development of the Nyngan scandium deposit located in New South Wales (“NSW”), Australia (“Nyngan” or the “Nyngan Scandium Project.”) We also hold exploration-stage properties in Australia, known as the “Honeybugle Scandium Property”, and in Finland, known as the “Kiviniemi Scandium Property.”
We acquired a 100% interest in the Nyngan Scandium Project in June of 2014 pursuant to the terms of a settlement agreement with Jervois Mining Ltd. of Melbourne, Australia. The project is held through our Australian subsidiary, EMC Metals Australia Pty Ltd. (“EMC Australia”), which also holds the Honeybugle Scandium Property.
During the third quarter of 2015, the Company converted a $2,500,000 loan from Scandium Investments LLC (“SIL”), an unrelated investment company, into a 20% minority interest in EMC Australia. As a result, from the third quarter 2015 until October 2017, the Company held an 80% equity interest in EMC Australia, with SIL holding a 20% interest. EMC Australia was operated as a joint venture between SIL and SCY with SIL holding a carried interest in the Nyngan Scandium Project until the Company met certain development milestones. The Company completed the development milestones during May 2017, and triggered a limited period option whereby SIL had a right to convert the fair market value of its 20% interest in EMC Australia into an equivalent value of SCY common shares, at then prevailing market prices.
In June of 2017, the Company entered into a share exchange agreement with SIL for the purchase of SIL’s 20% interest in EMC Australia in exchange for 57,371,565 common shares of SCY as well as an additional 1,459,080 common shares as a royalty adjustment payment. Closing of the purchase of the EMC Australia shares was subject to shareholder approval, which the Company obtained at a special meeting of shareholders held on September 11, 2017. The transaction subsequently closed on October 9, 2017. Under the terms of the share purchase agreement, on closing SIL was granted the right to nominate two individuals to the board of the Company for so long as SIL held at least 15% of Scandium’s issued and outstanding shares, and one director for so long as SIL held at least 5% but less than 15% of Scandium’s issued and outstanding shares. Pursuant to the nomination rights, Peter Evensen and R. Christian Evensen were appointed as directors to the SCY Board on closing of the transaction.
Principal Properties Review
Nyngan Scandium Project (NSW, Australia)
Nyngan Property Description and Location
The Nyngan Scandium Project site is located approximately 450 kilometers northwest of Sydney, NSW, Australia and approximately 20 kilometers due west of the town of Nyngan, a rural town of approximately 2,900 people. The general area can be characterized as flat countryside and is classified as agricultural land, used predominantly for wheat farming and livestock grazing.
Figure 1: Location of Nyngan Project
Note: None of the Existing Mines identified in Figure 1 produce scandium.
Figure 2: Location of the Exploration Licenses and Mining Lease for the Nyngan Scandium Project
Note: All Exploration Licenses and Leases described in Figure 2 are held 100% by EMC-A.
Nyngan Feasibility Study
On April 18, 2016, the Company announced the results of an independently prepared feasibility study on the Nyngan Scandium Project. The technical report on the feasibility study entitled “Feasibility Study – Nyngan Scandium Project, Bogan Shire, NSW, Australia” is dated May 4, 2016, and was independently compiled pursuant to the requirements of NI 43-101 (the “Feasibility Study” or the “DFS”). The report was filed on May 6, 2016 and is available on SEDAR (www.sedar.com), on the Company’s website (www.scandiummining.com) and the SEC’s website (www.sec.gov). A full discussion on the technical report was provided in the Company’s Form 10Q for the quarterly period ending March 31, 2016, as filed with the SEC and on SEDAR on May 13, 2016.
The Feasibility Study concluded that the Nyngan Scandium Project has the potential to produce an average of 37,690 kilograms of scandium oxide (scandia) per year, at grades of 98.0%-99.8%, generating an after-tax cumulative cash flow over a 20 year Project life of US$629 million; with an NPV10% of US$177 million. The average process plant feed grade over the 20 year Project life is 409ppm of scandium.
The financial results of the Feasibility Study are based on a conventional flow sheet, employing continuous high pressure acid leach (HPAL) and solvent extraction (SX) techniques. The flow sheet was modeled and validated from METSIM modeling and considerable bench scale/pilot scale metallurgical test work utilizing Nyngan resource material. A number of the key elements of this flowsheet work have been protected by the Company under US patent applications, four of which have been granted, with two of those four directly applicable in the flowsheet applied to the current Feasibility Study.
The Feasibility Study has been developed and compiled to an accuracy level of +15%/-5% by a globally recognized engineering firm that has considerable expertise in laterite deposits and process facilities, as well as in smaller mining and processing projects, and has excellent familiarity with the Nyngan Scandium Project location and environment.
Nyngan Scandium Project Highlights
|
● |
Capital cost estimate for the Project is US$87.1 million, |
|
● |
Annual scandium oxide product volume averages 37,690 kg per year over 20 years, |
|
● |
Annual revenue of US$75.4 million (oxide price assumption of US$2,000/kg), |
|
● |
Operating cost estimate for the Project is US$557/kg scandium oxide, |
|
● |
Project Constant Dollar NPV10% is US$177 million, NPV8% is US$225 million, |
|
● |
Project Constant Dollar IRR is 33.1%, |
|
● |
Oxide product grades of 98-99.8% based on customer requirements, |
|
● |
Project resource increases by 40% to 16.9 million tonnes, grading 235ppm Sc, at a 100ppm cut-off in the measured and indicated categories, and |
|
● |
Project Reserve totaling 1.43 million tonnes, grading 409ppm Sc was established on part of the resource. |
DFS Conclusions and Recommendations
The production assumptions in the Feasibility Study are backed by solid independent flow sheet test work on the planned process for scandium recovery and consolidate a significant amount of metallurgical test work and prior study on the Nyngan Scandium Project. The entire body of work demonstrates a viable, conventional process flow sheet, utilizing a continuous-system HPAL leaching process, and good metallurgical recoveries of scandium from the resource. The metallurgical assumptions are supported by various bench and pilot scale independent test work programs that are consistent with known outcomes in other laterite resources. The continuous autoclave configuration, as opposed to batch systems explored in previous flow sheets, is also a more conventional and current design choice.
The level of accuracy established in the Feasibility Study substantially reduces the uncertainty levels inherent in earlier studies. The greater confidence intervals around the Feasibility Study were achieved by reliance on significant project engineering work, a capital and operating cost estimate supported by detailed requirements and vendor pricing, plus one conditional offtake agreement and an independent marketing assessment, both supportive of the marketing assumptions on the business.
The Feasibility Study delivered a positive result on the Nyngan Scandium Project, and recommended the Nyngan Scandium Project owners seek finance and proceed to construction. Recommendations were made therein for additional immediate work, notably to complete some optimizing flow sheet studies, and to initiate as early as possible detailed engineering required on certain long-lead capital items. The Company has subsequently completed certain confirmatory flow sheet studies and test results, but intends to defer cost on detailed project engineering until such time as long-term offtake agreements for scandium product have been secured.
Confirmatory Metallurgical Test Results
On June 29, 2016, we announced the results of a confirmatory metallurgical test work report from Altrius Engineering Services (AES) of Brisbane, Australia. The test work results directly relate to the list of recommended programs included in the Feasibility Study. AES devised and supervised these test work programs at the SGS laboratory in Perth, Australia and at the Nagrom laboratory in Brisbane, Australia.
The project DFS recommended that a number of process flowsheet test work programs be investigated prior to commencing detailed engineering and construction. Those study areas included pressure leach (“HPAL”), counter-current decant circuits, solvent extraction (“SX”), and oxalate precipitation, with specific work steps suggested in each area. This latest test work program addressed all of these recommended areas, and the results confirmed recoveries and efficiencies that either meet or exceed the parameters used in the DFS. Highlights of the testing were:
|
● |
Pressure leach test work achieved 88% recoveries, from larger volume tests, |
|
● |
Settling characteristics of leach discharge slurry show substantial improvement, |
|
● |
Residue neutralization work meets or exceeds all environmental requirements as presented in the DFS and the environmental impact statement, |
|
● |
Solvent extraction circuit optimization tests generated improved performance, exceeding 99% recovery in single pass systems, and |
|
● |
Product finish circuits produced 99.8% scandium oxide, completing the recovery process from Nyngan ore to finished scandia product. |
Engineering, Procurement and Construction Management Contract
On May 30, 2017, the Company announced that its subsidiary EMC Australia signed an Engineering, Procurement and Construction Management ("EPCM") contract with Lycopodium Minerals Pty Ltd ("Lycopodium"), to build the Nyngan Scandium Project in New South Wales, Australia. The EPCM contract also provides for start-up and commissioning services.
The EPCM contract appoints Lycopodium (Brisbane, QLD, Australia) to manage all aspects of project construction. Lycopodium was the principal engineering firm involved with the DFS. Lycopodium's continued involvement in project construction and commissioning ensures valuable technical and management continuity for the project during the construction and startup of the project.
On October 19, 2017, we announced that Lycopodium has been instructed to initiate critical path engineering for the Nyngan Scandium Project. Lycopodium commenced work on select critical path components for the project, including design and specification engineering on the high-pressure autoclave unit, associated flash and splash vessels, and several specialized high-pressure input pumps. The engineering work was completed in 2018 and will enable final supplier selection, firm component pricing and delivery dates for these key process components.
Environmental Permitting/Development Consent/Mining Lease
On May 2, 2016, the Company announced the filing of an Environmental Impact Statement (“EIS”) with the New South Wales Department of Planning and Environment (the “Department”) in support of the planned development of the Nyngan Scandium Project. The EIS was prepared by R.W. Corkery & Co. Pty. Limited, on behalf of the Company’s subsidiary, EMC Australia, to support an application for Development Consent for the Nyngan Scandium Project. The EIS is a self-contained set of documents, which includes a Specialist Consultants’ Study Compendium, and is considered the foundational environmental document used to seek a Development Consent.
EIS Highlights:
|
● |
The EIS finds residual environmental impacts represent negligible risk. |
|
● |
The proposed development design achieves sustainable environmental outcomes. |
|
● |
The EIS finds net-positive social and economic outcomes for the community. |
|
● |
Nine independent environmental consulting groups conducted analysis over five years, and contributed report findings to the EIS. |
|
● |
The Nyngan Project development is estimated to contribute A$12.4M to the local and regional economies, and A$39M to the State and Federal economies, annually. |
|
● |
The EIS is fully aligned with the DFS and with a NSW Mining License Application for the Nyngan Project. |
The conclusion statement in the EIS reads as follows: “In light of the conclusions included throughout this Environmental Impact Statement, it is assessed that the Proposal could be constructed and operated in a manner that would satisfy all relevant statutory goals and criteria, environmental objectives and reasonable community expectations.”
Development Consent:
The Development Consent is considered the key approval required to build a mine facility in Australia. As the Nyngan Scandium Project is considered a State Significant Project (capital cost + A$30 million), the Minister of Planning and Environment is designated to manage the investigation and approval process for any granting of a Development Consent.
On November 10, 2016, the Company announced that the Development Consent had been granted. This Development Consent represents an approval to develop the Nyngan Scandium Project and is based on facts and findings contained in the EIS. The Development Consent follows an in-depth review of the EIS, the project plan, community impact studies, public EIS exhibition and commentary, and economic viability, and involved more than 12 specialized governmental agencies and groups.
Mining Lease:
During July 2019, EMC Australia received notice of approval for its most current mining lease (ML) application. The ML (ML 1792) overlays select areas previously covered by exploration licenses and represents the final major development approval required from the NSW Government to begin construction on the project. The ML 1792 grant is issued for a period of 21 years and is based on the development plans and intent submitted in the ML application. The ML can be modified by NSW regulatory agencies, as requested by EMC Australia over time, to reflect changing operating conditions.
In addition to these two key governmental approvals, other required licenses and permits must be acquired but are considered routine and require only compliance with fixed standards and objective measurements. These remaining approvals include submittal of numerous plans and reports supporting compliance with the Development Consent and Mining Lease. In addition, the following water, roads, dam and electrical access reviews and arrangements must be finalized:
|
● |
Water Supply Works and Use Approval and Water Access License, |
|
● |
State and local approval for construction of the intersection of the Site Access Road and Gilgai Road, |
|
● |
An approval from the NSW Dams Safety Committee for the design and construction of the Residue Storage Facility, and |
|
● |
A high voltage connection agreement with Essential Energy. |
The 2019 ML 1792 grant covers 810 acres (354 hectares) of surface area fully owned by the Company, an area adequate to construct and operate a scandium mine of a scale outlined in the definitive Feasibility Study. The Company had originally filed a mining lease application (MLA 531) covering an area of 874 hectares, which was granted in 2017 as a mining lease (ML 1763), and later ruled invalid. At that time, it was unknown, to both the Department and the Company, that a local landowner had filed a prior, timely and valid objection to the granting of that mining lease. The reduction in area between the initial 2017 ML 1763 and the replacement 2019 ML 1792 represented acreage protested in an “Agricultural Land” objection lodged by a local landowner. The landowner holds freehold surface ownership over a portion of the original grant that was previously covered by the 2017 ML 1763.
On September 10, 2020, the Company announced receipt of a final determination letter from the Deputy Secretary, Department of Regional NSW, Division of Mining, Exploration and Geoscience resolving the outstanding objection filed by the landowner in 2016.
Written advice from the Department to the Company makes clear that all required independent investigative processes, and all affected party comment periods, were completed, and the Department’s decision in this dispute matter is final. There are further state courts of appeal available to the landowner, but the facts supporting this final decision are confirmed by the NSW Department of Primary Industry and follow governing law.
This Final Determination from the NSW Government will again allow all measured and indicated resource included in the Nyngan Scandium Project DFS to be reinstated in a new mining lease grant, which will require the filing of a new mine lease application which was filed in Q3 2022.
Honeybugle Scandium Property (NSW, Australia)
On April 2, 2014, the Company announced that it had secured a 100% interest in an exploration license (EL 7977) covering 34.7 square kilometers in New South Wales, Australia. The license area we call the ‘Honeybugle Scandium Property’ is located approximately 24 kilometers west-southwest from the Company’s Nyngan Scandium Project and approximately 36 kilometers southwest from the town of Nyngan, NSW. The application to renew the exploration license for a further six years was approved in November 2022.
Exploration rights for the Honeybugle Scandium Property include certain minimum expenditure requirements. The Company intends to fulfill those minimum expenditure requirements and has planned a new drilling program to commence in the first quarter of 2023.
Honeybugle Drill Results
Please refer to the section titled "Scandium International Corporate Overview" on page 13.
The 2014 drilling program consisted of an initial program of 30 air core (“AC”) drill holes on the property, specifically at the Seaford anomaly, targeting scandium (Sc). Results on 13 of these holes are shown in detail, in the table below. These holes suggest the potential for scandium mineralization on the property similar to Nyngan.
Highlights of initial drilling program results include the following:
|
● |
The highest 3-meter intercept graded 572 ppm scandium (hole EHAC 11). |
|
● |
EHAC 11 also generated two additional high grade scandium intercepts, grading 510 ppm and 415 ppm, each over 3 meters. |
|
● |
The program identified a 13-hole cluster which was of particular interest; intercepts on these 13 holes averaged 270 ppm scandium over a total 273 meters, at an average continuous thickness of 21 meters per hole, representing a total of 57% (354 meters) of total initial program drilling. |
|
● |
The 13 holes produced 29 individual (3-meter) intercepts over 300 ppm, representing 31% of the mineralized intercepts in the 273 meters of interest. |
|
● |
This initial 30-hole AC exploratory drill program generated a total of 620 meters of scandium drill/assay results, over approximately 1 square kilometer on the property. |
Kiviniemi Scandium Property (Eastern Finland Province, Finland)
On September 25, 2017, the Company announced that its wholly-owned subsidiary company, Scandium International Mining Corp., Norway AS, was granted a reservation on an Exploration License for the Kiviniemi Scandium property in central Finland from the Finnish regulatory body governing mineral exploration and mining in Finland. The exploration license was subsequently granted during August 2018. In the third quarter of 2022, the Company applied for an additional three year extension of the Exploration License.
The Geological Survey of Finland (“GTK”) conducted airborne survey work on the area in 1986, conducted exploration drilling on the property in 2008-2010, and published those program results on their public GTK website in 2016. The Company’s Exploration License area is approximately 24.6 hectares (0.25 square kilometer), identical to the historic GTK exploration license on the property.
Highlights
|
● |
Kiviniemi property previously identified for scandium and explored by GTK. |
|
● |
Property is a high iron content, medium grade scandium target, located on surface, with on-site upgrade potential. |
|
● |
Early resource upgrade work done for GTK promising, confirmed by SCY. |
|
● |
Property is all-weather accessible, close to infrastructure. |
|
● |
Finland location is mining-friendly and ideally suited to EU customer markets. |
Kiviniemi Summary
The Kiviniemi property represents a medium grade scandium resource target that has remained unrecognized and overlooked by exploration work, largely due to the absence of the more commonly sought-after minerals in the region, specifically copper, nickel and cobalt. We believe that Kiviniemi is Europe’s largest underdeveloped primary scandium resource.
The target has benefited significantly from valuable early exploration work by the GTK, which has advanced the property to a stage where successful metallurgical investigations may prove value that offsets grade concerns. SCY estimates roughly US$2M of work value has been directed at this property to date, including field work, drilling programs, assay work, overheads, and metallurgical upgrade studies, but firm numbers are not available.
Downstream Scandium Products
In February 2011, we announced the results of a series of laboratory-scale tests investigating the production of aluminum-scandium master alloys directly from aluminum oxide and scandium oxide feed materials. The overall objective of this research was to demonstrate and commercialize the production of aluminum-scandium master alloy using impure scandium oxide as the scandium source, potentially significantly improving the economics of aluminum-scandium master alloy production. In October 2019, the Company was granted Patent No. 10450634, titled “Scandium-Containing Master Alloys And Method For Making The Same.”
During the 2015-2017 timeframe, we continued our own internal laboratory-scale investigations into the production of aluminum-scandium master alloys, furthering our understanding of commercial processes, and achievable recoveries. We also advanced our abilities to make a commercial-grade 2% scandium master alloy product.
On March 2, 2017, we announced the signing of a Memorandum of Understanding ("MOU") with Weston Aluminium Pty Ltd. ("Weston") of Chatswood, NSW, Australia. The MOU defines a cooperative commercial alliance to jointly develop the capability to manufacture aluminum-scandium master alloy. The intended outcome of this alliance will be to develop the capability to offer Nyngan Scandium Project aluminum alloy customers scandium in form of Al-Sc master alloy, should customers prefer that product form.
The MOU outlines steps to jointly establish the manufacturing parameters, metallurgical processes, and capital requirements to convert Nyngan Scandium Project scandium product into Master Alloy, at Weston's existing production site in NSW. The MOU does not include a binding contract with commercial terms at this stage, although the intent is to pursue the necessary technical elements to arrive at a commercial contract for conversion of scandium oxide to master alloy, and to do so prior to first mine production from the Nyngan Scandium Project.
On March 5, 2018, the Company announced that it had initiated a small scale pilot program (4kg scale) at the Alcereco Inc. metallurgical research facilities in Kingston, Ontario, to confirm and refine previous lab-scale work on the manufacture of aluminum-scandium 2% master alloy (MA). The program advanced the process understanding for commercial scale upgrade of Nyngan scandium oxide product to master alloy product.
The 2018 pilot program consisted of 5 separate trials on two MA product types, production of MA in various forms, and dross analysis to ascertain scandium recoveries to product. The mass of master alloy and product variants produced in the program totaled approximately 20kg and was completed in December of 2018. The results of the program included the successful production of 2% grade MA, with recoveries of scandium to product of 85%.
A second phase of the small-scale pilot program was initiated in the first half of 2019, again at 4kg scale, building on the work done in phase I. The results of this second program included successful production of 2% grade MA, with improvements in form of rapid kinetics, and recoveries of scandium to product of +90%.
On March 5, 2018, the Company also announced that it filed for patent protection on certain process refinements for master alloy manufacture that it believes are novel methods, and also on certain product variants that it believes represent novel forms of introducing scandium more directly into aluminum alloys. In April of 2021, the Company was granted Patent No. 10,988,830, titled “Scandium Master Alloy Production.”
Master Alloy Capability Demonstrated
On February 24, 2020, the Company announced the completion of a three year, three stage program to demonstrate the capability to manufacture aluminum-scandium master alloy (Al-Sc2%), from scandium oxide, using a patent pending melt process involving aluminothermic reactions.
This master alloy capability will allow the Company to offer scandium product from the Nyngan Scandium Project in a form that is used directly by aluminum alloy manufacturers globally, either major integrated manufacturers or smaller wrought or casting alloy consumers.
Research Highlights:
|
● |
Program achieved full 2% target product quality requirement, |
|
● |
Sc recoveries from oxide exceeded target, demonstrated in final tests, |
|
● |
The microstructure and metal quality meet major alloy producers’ specifications, |
|
● |
Rapid kinetics achieved, important for commercial viability, |
|
● |
Individual testing batches done at 4kg scale, and |
|
● |
Successful program testing forms a basis for a larger scale demonstration facility, supporting large scale samples required for industrial aluminum alloy trials. |
Focus on Aluminum Alloy Applications for Scandium Products
Our focus is on the use of scandium as an alloying ingredient in aluminum-based products. The specific scandium product forms we intend to sell from the Nyngan project include both scandium oxide (Sc2O3) and aluminum-scandium master alloys (Al-Sc 2%).
Scandium as an alloying agent in aluminum allows for aluminum metal products that are much stronger, more easily weldable and exhibit improved performance at higher temperatures than current aluminum-based materials. This means lighter structures, lower manufacturing costs and improved performance in areas that aluminum alloys do not currently compete.
Cerium-Scandium Aluminum Alloy Program Agreement
On February 27, 2020, the Company announced signing a Program Agreement with Eck Industries (“ECK”) located in Manitowoc, Wisconsin, to pursue novel alloy development of a combined cerium-scandium aluminum alloy, based on previous work done independently by the companies in this area.
The companies intend to pursue alloy refinements in both wrought and cast alloy applications, specifically targeting property improvements related to strength, corrosion resistance, and heat-working tolerance, principally in A5000 series alloys.
Program Highlights:
|
● |
Joint economic and technical support to alloy design, |
|
● |
Joint sharing of previous data, and new data produced from this program, |
|
● |
Samples production for customer trials, either as cast products, or wrought sample shapes for various potential customers and alloy manufacturers, |
|
● |
Initial high value application expected to be in marine applications, and |
|
● |
Program work is protected by existing patent applications filed by ECK. |
Use Of Scandium In Lithium-Ion Batteries
On September 24, 2020, the Company announced the filing of a provisional patent application with the US Patent Office seeking patent rights on various applications of scandium in lithium-ion batteries. The patent application covers a number of scandium enhancements, including doping potential for both anodes and cathodes, and for solid electrolytes.
Patent Application Highlights:
|
● |
US Patent Application filed for use of scandium in lithium-ion battery applications. |
|
● |
Scandium doping applications are explained for anodes, cathodes and electrolytes. |
|
● |
Scandium offers conductivity advantages as a dopant, over other options, and |
|
● |
Scandium in other aluminum components offers numerous property improvements, including conductivity, strength and corrosion resistance. |
Patent Application Discussion:
Rechargeable lithium-ion batteries (LIBs) are a staple of everyday life. The search for improved performance through design and materials advances is intense today. Considerable effort is being expended in developing next-generation materials for LIBs that will make batteries safer, lighter, more durable, faster to charge, more powerful, and more cost-effective. A sampling of some these efforts follows:
|
● |
Minimizing or removing cobalt from cathode materials, based on cost, supply and geographic sourcing issues. |
|
● |
Improving the durability of liquid electrolytes with dopants, or substitution with safer and higher performing liquid or solid electrolyte systems. |
|
● |
Designing for higher voltage potential by utilizing different anode or cathode materials. |
|
● |
Determining combinations of metals that can better withstand harsh internal conditions. |
Scandium, along with other specialty metals, has a clear role to play in each of these areas.
One particularly promising area for scandium contributions is in a lithium nickel manganese oxide (LNMO) battery. The cathode in this design substitutes manganese for cobalt and supports a higher nickel content as well. The substitution then delivers higher working potentials (voltage), higher energy densities, and faster charge/discharge rates, all of which offer the promise of improved battery performance.
Delivering on that promise requires a number of improvements, including employing a dopant for stabilization of the manganese in the LNMO cathode, potential stabilization of lithium titanate (LTO) anode materials as well, and use of dopants to improve the conductivity of both these anode and cathode materials. Conventional liquid electrolytes may see improved function and longevity with the improved cathode and anode conductivity. Scandium represents a suitable and effective dopant in each of these applications.
Solid state electrolytes (SSEs) represent another potential break-through improvement in LIBs. They will handle higher voltages, higher temperatures, greater power densities, are potentially easier to package, and are considered safer in use. Scandium represents a suitable and effective dopant in these applications, analogous to the use of scandium to stabilize solid zirconia electrolytes in solid oxide fuel cells. Recently technical papers (available upon request) covering the use of Lithium Super Ion Conductors (LiSICON) for SSEs have indicated that primary compounds containing scandium, such as Li3Sc2(PO4)3, LiScP2O7 and Li3Sc(BO3)2, LiScO2 as well as certain doped compounds such as Li1.33ScSi0.33P1.67O7, Li3.375Mg0.375Sc0.625(BO3)2, Li1.5Al0.33Sc0.17Ge1.5(PO4)3, etc. can provide desirable crystal structural frameworks for solid state electrolytes. Non-oxide LiSICON fast conductors have also been identified recently, such as some lithium cryolite types: Li3ScCl6, as well as its fluoride counterpart Li3ScF6.
Lithium-ion batteries employ aluminum in a number of areas, specifically in cathode structure, current connectors, and in general battery structure. Aluminum-scandium alloys represent an enhanced aluminum alloy option, based on their combination of conductivity and strength.
The intent of this SCY patent filing was to advise the battery industry that scandium is a prospective dopant choice for enhanced performance of LIBs, both under existing design parameters and in particular for next-generation LNMO batteries. We want to ensure that battery research and design groups consider scandium additions, amongst their various materials choices, as they race to build a better lithium-ion battery.
Operating results - Revenues and Expenses
The Company’s results on a year-to-date basis reflect lower operating costs. Cash expenditures were $48,206 higher due to higher exploration costs.
Summary of quarterly results
A summary of the Company’s quarterly results is shown below at Table 1.
Table 1. Quarterly Results Summary (US$)
|
2023 |
2022 |
2021 |
||||||||||||||||||||||||||||||
|
Q2 |
Q1 |
Q4 |
Q3 |
Q2 |
Q1 |
Q4 |
Q3 |
|||||||||||||||||||||||||
|
Net Sales |
- | - | - | - | - | - | - | - | ||||||||||||||||||||||||
|
Net Income (Loss) attributable to Scandium Mining Corp. |
(129,756 | ) | 236,000 | 228,371 | 70,701 | 28,578 | 522,946 | (215,111 | ) | (278,704 | ) | |||||||||||||||||||||
|
Basic and diluted Net Income (Loss) per share attributable to Scandium Mining Corp. |
(0.00 | ) | (0.00 | ) | (0.00 | ) | (0.00 | ) | (0.00 | ) | (0.00 | ) | (0.00 | ) | (0.00 | ) | ||||||||||||||||
Results of Operations for the three months ended June 30, 2023
The net loss for the quarter was $(129,756), a decrease of $158,334 from a net profit of $28,578 in the same quarter of the prior year. Details of the individual items contributing to the net decrease are set out below at Table 2:
Table 2. Variance Analysis for Net Loss
|
Q2 2023 vs. Q2 2022 – Variance Analysis |
|||||
|
Item |
Variance Favourable / (Unfavourable)
|
Explanation |
|||
|
Accruals reversal |
$ | (251,600 | ) |
In Q2 2022, the Company reversed accrued liabilities for certain staff who are no longer with the Company. No such item was incurred in 2023. |
|
|
Exploration |
$ | (194,459 | ) |
In Q2 2023, the Company carried out drilling activities on its Australian properties while in Q2 2022, no exploration activities were conducted. To further increase this unfavorable variance, the Company received a refund from the Australian government related to over payment of mining license costs. |
|
|
Foreign exchange |
$ | (14,213 | ) |
The US dollar strengthened in Q2 against both the Australian and Canadian dollar. Because we hold a large amount of funds in these two currencies a greater foreign exchange loss was incurred than in Q2 of 2022. |
|
|
Insurance |
$ | (272 | ) |
Slightly higher premiums for D&O insurance and general liability insurance resulted in this minor variance when comparing the two quarters. |
|
|
Amortization |
$ | 2,513 |
All fixed assets were fully depreciated in Q2 2022, resulting in no expense associated with this item in Q2 of 2023. |
||
|
Salaries and benefits |
$ | 5,422 |
In Q2 2022, the Company was in the process of redirecting its activities and incurred slightly higher costs as additional hours were required from staff to complete all of the required filings associated with investor undertakings. |
||
|
Professional fees |
$ | 9,321 |
In Q2 2022 advice from our legal firm were required as the Company underwent management changes. No such activities took place in Q2 2023. |
||
|
Interest income |
$ | 10,353 |
In 2023, the Company purchased short term secure investments. No similar opportunity existed in Q2 2022. |
||
|
General and administrative |
$ | 34,279 |
With the closing of the Sparks, Nevada office and reduced staffing, a favorable variance was realized when compared to Q2 2022. |
||
|
Stock-based compensation [in the income statement included as part of salaries and benefits] |
$ | 66,763 |
Stock options granted in Q2 2022 vested 25% at grant date and then a further 25% every 6 months resulting in a larger expense in Q2 2022 when compared to Q2 2023. |
||
|
Gain on derivative liability |
$ | 173,559 |
Warrants issued in Q2 2022 are in Canadian funds. The value of the warrants are recalculated based on Black-Scholes calculation at the end of each quarter. With the decrease in the share price this expense decreases. As the exchange rate with the Canadian dollar fluctuates, a gain or loss on this is recorded in the financial statements. This is a non-cash item. |
||
Results of Operations for the six months ended June 30, 2023
The net profit for the six month period was $106,244, a decrease of $445,280 from a net profit of $551,524 in the same six month period of the prior year. Details of the individual items contributing to the net decrease are set out below at Table 3:
Table 3. Variance Analysis for Net Profit
|
Six-month period ending June 30, 2023 vs. the six-month period ending June 30, 2022 – Variance Analysis |
|||||
|
Item |
Variance Favourable / (Unfavourable)
|
Explanation |
|||
|
Accruals reversal |
$ | (1,032,044 | ) |
In the 2022, the Company reversed accrued liabilities for certain staff who are no longer with the Company. No such item was incurred in 2023. |
|
|
Exploration |
$ | (212,496 | ) |
In Q2 2023, the Company carried out drilling activities on its Australian properties while in 2022, no exploration activities were conducted. To further increase this unfavorable variance, the Company received a refund from the Australian government related to over payment of mining license costs. |
|
|
Foreign exchange |
$ | (28,873 | ) |
The US dollar strengthened in 2023 against both the Australian and Canadian dollar. Because we hold a large amount of funds in these two currencies a greater foreign exchange loss was incurred than in 2022. |
|
|
Stock-based compensation [in the income statement included as part of salaries and benefits] |
$ | (26,949 | ) |
Stock options granted in Q2 2022 will vest and be expensed over an 18-month period resulting in charges in Q1 2023 while stock options granted prior to 2022 vested and were expensed immediately resulting in no expenses being charged in Q1 2022. |
|
|
Travel |
$ | (3,737 | ) |
With the start of the drilling program at Honeybugle, management visited the property and legal counsel in Australia. No such expenditures were incurred in Q1 2022. |
|
|
Insurance |
$ | (195 | ) |
Slightly higher premiums for D&O insurance and general liability insurance resulted in this minor variance when comparing the two quarters. |
|
|
Amortization |
$ | 2,932 |
All fixed assets were fully depreciated in Q2 2022, resulting in no expense associated with this item in 2023. |
||
|
Professional fees |
$ | 10,927 |
In Q2 2022 advice from our legal firm were required as the Company underwent management changes. No such activities took place in 2023. |
||
|
Consulting |
$ | 17,000 |
The resignation of a consultant in 2022 led to this favorable variance in the current six month period. |
||
|
Interest income |
$ | 17,732 |
In 2023, the Company purchased short term secure investments. No similar opportunity existed in 2022. |
||
|
Salaries and benefits |
$ | 55471 |
This favorable variance is due to the resignation of senior staff that have not been replaced in Q1 2022. |
||
|
General and administrative |
$ | 84,824 |
With the closing of the Sparks, Nevada office and reduced staffing, a favorable variance was realized when compared to 2022 when there was much more activity and staffing. |
||
|
Gain on derivative liability |
$ | 603,365 |
Warrants were issued in Q2 2022 were in Canadian funds. The value of the warrants are recalculated based on Black-Scholes calculation at the end of each quarter. As the Company’s share price has decreased a gain is recognized on the derivative liability. Also as the exchange rate with the Canadian dollar fluctuates, a gain or loss on this is recorded in the financial statements. This is a non-cash item. |
||
Cash flow discussion for the six-month period ended June 30, 2023, compared to June 30, 2022
The cash outflow for operating activities was $491,896, a decrease of $14,409 (June 30, 2022 – $506,305).
Financial Position
Cash
The Company’s cash position decreased during the six-month period by $491,896 to $1,360,814 (December 31, 2022 - $1,852,710) due mainly to payments of accrued salaries.
Prepaid expenses and receivables
Prepaid expenses and accounts receivable increased by $3,567 to $37,108 during the six-month period due to the accruing of interest earned on cash deposits (December 31, 2022 - $33,541).
Mineral interests
Mineral interests remained the same at $704,053.
Accounts payable, accrued liabilities and accounts payable with related parties
Current liabilities have decreased by $643,014 to $864,710 (December 2022– $1,507,724) due to the warrant derivative liability being decreased and the payment of accrued salaries. Excluding the derivative liability, a decrease of $135,539 took place for this item.
Capital Stock
Capital stock remained at $111,144,603 (December 31, 2022 - $111,144,603).
Additional paid-in capital increased by $48,633 to $7,067,749 (December 31, 2022 - $7,019,116) reflecting stock-based compensation expense.
Liquidity and Capital Resources
At June 30, 2023, the Company had a working capital of $533,212 including cash of $1,360,814, as compared to a working capital of $358,527 including cash of $1,852,710 at December 31, 2022.
At June 30, 2023, the Company had a total of 28,965,000 stock options exercisable between C$0.065 and C$0.185 that have the potential upon exercise to generate a total of C$3,471,000 in cash over the next two and a half years. There is no assurance that these securities will be exercised. At June 30, 2023, the Company had a total of 37,803,218 share purchase warrants exercisable at C$0.1075 that have the potential upon exercise to generate a total of C$4,063,846 in cash over the next four years. The Company’s continued development is contingent upon its ability to raise sufficient financing both in the short and long term. There are no guarantees that additional sources of funding will be available to the Company; however, management is committed to pursuing all possible sources of financing in order to execute its business plan. The Company continues its cost control measures to conserve cash to meet its operational obligations.
Outstanding share data
At the date of this report, the Company has 355,860,813 issued and outstanding common shares, 37,803,218 purchase warrants currently outstanding at an exercise price of C$0.1075 and 28,965,000 stock options currently outstanding at a weighted average exercise price of C$0.12.
Off-balance sheet arrangements
At June 30, 2023, the Company had no material off-balance sheet arrangements such as guarantee contracts, contingent interest in assets transferred to an entity, derivative instruments obligations or any obligations that trigger financing, liquidity, market or credit risk to the Company.
Transactions with related parties
During the 6-month period ended June 30, 2023, the Company expensed $44,367 for stock-based compensation for stock options granted to Company directors. During the 6-month period ended June 30, 2022, the Company expensed $80,688 for stock-based compensation for stock options issued to Company directors.
During the 6-month period ended June 30, 2022, the Company reversed $669,733 of accruals to related parties. No such transactions occurred in the 6-month period ended June 30, 2023.
During the 6-month period ended June 30, 2023, the Company expensed a consulting fee of $Nil to one of its directors. During the 6-month period ended June 30, 2022, the Company expensed a consulting fee of $17,000 to one of its directors.
As at June 30, 2023, the Company owed $92,610 to an officer of the Company. (December 31, 2022 - $185,576)
Proposed Transactions
There are no proposed transactions outstanding other than as disclosed.
Critical Accounting Estimates
The preparation of financial statements in conformity with generally accepted accounting policies requires management of the Company to make estimates and assumptions that affect the reported amounts of assets and liabilities at the date of the financial statements and the reported amounts of revenues and expenses during the reporting period. These estimates are based on past experience, industry trends and known commitments and events. By their nature, these estimates are subject to measurement uncertainty and the effects on the financial statements of changes in such estimates in future periods could be significant. Actual results will likely differ from those estimates.
Stock-based compensation
The Company uses the Black-Scholes option pricing model to calculate the fair value of stock options and compensatory warrants granted. This model is subject to various assumptions. The assumptions the Company makes will likely change from time to time. At the time the fair value is determined, the methodology the Company uses is based on historical information, as well as anticipated future events. The assumptions with the greatest impact on fair value are those for estimated stock volatility and for the expected life of the instrument.
Future income taxes
The Company accounts for tax consequences of the differences in the carrying amounts of assets and liabilities and their tax bases using tax rates expected to apply when these temporary differences are expected to be settled. When the future realization of income tax assets does not meet the test of being more likely than not to occur, a valuation allowance in the amount of the potential future benefit is taken and no future income tax asset is recognized. The Company has taken a valuation allowance against all such potential tax assets.
Mineral properties and exploration and development costs
The Company capitalizes the costs of acquiring mineral rights at the date of acquisition. After acquisition, various factors can affect the recoverability of the capitalized costs. The Company’s recoverability evaluation of our mineral properties and equipment is based on market conditions for minerals, underlying mineral resources associated with the assets and future costs that may be required for ultimate realization through mining operations or by sale. The Company is in an industry that is exposed to a number of risks and uncertainties, including exploration risk, development risk, commodity price risk, operating risk, ownership and political risk, funding and currency risk, as well as environmental risk. Bearing these risks in mind, the Company has assumed recent world commodity prices will be achievable. The Company has considered the mineral resource reports by independent engineers on the Nyngan Scandium Project in considering the recoverability of the carrying costs of the mineral properties. All of these assumptions are potentially subject to change, out of our control, however such changes are not determinable. Accordingly, there is always the potential for a material adjustment to the value assigned to mineral properties and equipment.
Recent Accounting Pronouncements
There are no recently issued accounting standards updates that are currently expected to have a material impact on the Company.
Financial instruments and other risks
The Company’s financial instruments consist of cash, receivables, accounts payable, accounts payable with related parties, accrued liabilities and promissory notes payable. It is management's opinion that the Company is not exposed to significant interest, currency or credit risks arising from its financial instruments. The fair values of these financial instruments approximate their carrying values unless otherwise noted. The Company has its cash primarily in three commercial banks: (i) one in Vancouver, British Columbia, Canada, (ii) one in Mackay, Queensland, Australia, and (iii) one in Chicago, Illinois, United States.
Information Regarding Forward-Looking Statements
This Management’s Discussion and Analysis of Financial Condition and Results of Operations contain certain forward-looking statements. Forward-looking statements include but are not limited to those with respect to the prices of metals, the estimation of mineral resources and reserves, the realization of mineral reserve estimates, the timing and amount of estimated future production, costs of production, capital expenditures, costs and timing of the development of new deposits, success of exploration activities, permitting time lines, currency fluctuations, requirements for additional capital, government regulation of mining operations, environmental risks, unanticipated reclamation expenses, title disputes or claims and limitations on insurance coverage and the timing and possible outcome of pending litigation. In certain cases, forward-looking statements can be identified by the use of words such as “plans”, “expects” or “does not expect”, “is expected”, “estimates”, “intends”, “anticipates” or “does not anticipate” or “believes” or variations of such words and phrases, or statements that certain actions, events or results “may”, “could”, “would”, or “will” be taken, occur or be achieved. Forward-looking statements involve known and unknown risks, uncertainties and other factors which may cause the actual results, performance, or achievements of Scandium International to be materially different from any future results, performance or achievements expressed or implied by the forward-looking statements. Such risks and uncertainties include, among others, the actual results of current exploration activities, conclusions or economic evaluations, changes in project parameters as plans continue to be refined, possible variations in grade and or recovery rates, failure of plant, equipment or processes to operate as anticipated, accidents, labor disputes or other risks of the mining industry, delays in obtaining government approvals or financing or incompletion of development or construction activities, risks relating to the integration of acquisitions, to international operations, and to the prices of metals and risks relating to the COVID-19 pandemic. While Scandium International has attempted to identify important factors that could cause actual actions, events or results to differ materially from those described in forward-looking statements, there may be other factors that cause actions, events or results not to be as anticipated, estimated or intended. There can be no assurance that forward-looking statements will prove to be accurate, as actual results and future events could differ materially from those anticipated in such statements. Accordingly, readers should not place undue reliance on forward-looking statements. Scandium International expressly disclaims any intention or obligation to update or revise any forward-looking statements, whether as a result of new information, future events or otherwise.
Item 3. Quantitative and Qualitative Disclosures About Market Risk
Not applicable.
Item 4. Controls and Procedures
Disclosure controls and procedures
The Company’s management is responsible for establishing and maintaining adequate disclosure controls and procedures. The Company’s management, including our principal executive officer and our principal financial officer, evaluated the effectiveness of our disclosure controls and procedures (as defined in Exchange Act Rule 13a-15(e)) as of the end of the period covered by this report. Based on that evaluation, the principal executive officer and principal financial officer concluded that as of the end of the period covered by this report, the Company has maintained effective disclosure controls and procedures in all material respects, including those necessary to ensure that information required to be disclosed in reports filed or submitted with the SEC (i) is recorded, processed, and reported within the time periods specified by the SEC, and (ii) is accumulated and communicated to management, including the principal executive officer and principal financial officer, as appropriate to allow for timely decision regarding required disclosure.
Changes in Internal Control
There have been no changes in internal control over financial reporting that occurred during the last fiscal quarter that have materially affected, or are reasonably likely to materially affect, internal control over financial reporting.
PART II – OTHER INFORMATION
Item 1. Legal Proceedings
We are not aware of any material current, pending, or threatened litigation with respect to the Company.
Item 2. Unregistered Sales of Equity Securities and Use of Proceeds.
Not applicable.
Item 3. Defaults Upon Senior Securities.
Not applicable.
Item 4. Mine Safety Disclosures
Not applicable.
Item 5. Other Information
Not applicable.
Item 6. Exhibits
|
31.1 |
|
31.2 |
|
32.1 |
Section 1350 Certification of the Principal Executive Officer (filed herewith) |
|
32.2 |
Section 1350 Certification of the Principal Financial Officer (filed herewith) |
|
101 |
Financial Statements from the Quarterly Report on Form 10-Q of the Company for the three and six months ended June 30, 2023, formatted in Inline XBRL (filed herewith) |
|
104 |
Cover Page Interactive Data File (embedded within the Inline XBRL and contained in Exhibit 101) |
SIGNATURES
Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned thereunto duly authorized.
Date: August 10, 2023
|
SCANDIUM INTERNATIONAL MINING CORP. |
|||
|
|
(Registrant) |
||
|
|
By: |
/s/ “Peter B. Evensen” |
|
|
|
Principal Executive Officer |
||
|
|
By: |
/s/ “R. Christian Evensen” |
|
|
|
Principal Financial Officer |
||
Exhibit 31.1
CERTIFICATION
PURSUANT TO RULE 13a-14(a) OR 15d-14(a)
OF THE U.S. SECURITIES EXCHANGE ACT OF 1934
I, Peter Evensen, certify that:
|
1. |
I have reviewed this quarterly report on Form 10-Q for the fiscal quarter ended June 30, 2023 of Scandium International Mining Corp. |
|
|
|
|
2. |
Based on my knowledge, this report does not contain any untrue statement of a material fact or omit to state a material fact necessary in order to make the statements made, in light of the circumstances under which such statements were made, not misleading with respect to the period covered by this report; |
|
|
|
|
3. |
Based on my knowledge, the financial statements, and other financial information included in this report, fairly present in all material respects the financial condition, results of operations and cash flows of the registrant as of, and for, the periods presented in this report; |
|
|
|
|
4. |
The registrant’s other certifying officer(s) and I are responsible for establishing and maintaining disclosure controls and procedures (as defined in Exchange Act Rules 13a-15(e) and 15d-15(e)) and internal control over financial reporting (as defined in Exchange Act Rules 13a-15(f) and 15d-15(f)) for the registrant and have: |
|
a) |
designed such disclosure controls and procedures, or caused such disclosure controls and procedures to be designed under our supervision, to ensure that material information relating to the registrant, including its consolidated subsidiaries, is made known to us by others within those entities, particularly during the period in which the annual report is being prepared; |
|
|
b) |
designed such internal control over financial reporting, or caused such internal control over financial reporting to be designed under our supervision, to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles; |
|
|
c) |
evaluated the effectiveness of the registrant’s disclosure controls and procedures and presented in this report our conclusions about the effectiveness of the disclosure controls and procedures, as of the end of the period covered by this report based on such evaluation; and |
|
|
|
||
|
d) |
disclosed in this report any change in the registrant’s internal control over financial reporting that occurred during the registrant’s most recent fiscal quarter (the registrant’s fourth fiscal quarter in the case of an annual report) that has materially affected, or is reasonably likely to materially affect the registrant’s internal control over financial reporting; |
|
5. |
The registrant’s other certifying officer(s) and I have disclosed, based on our most recent evaluation of internal control over financial reporting, to the registrant’s auditors and the audit committee of registrant’s board of directors (or persons performing the equivalent function): |
|
a) |
all significant deficiencies and material weaknesses in the design or operation of internal control over financial reporting which are reasonably likely to adversely affect the registrant’s ability to record, process, summarize and report financial information; and |
|
|
|
||
|
b) |
any fraud, whether or not material, that involves management or other employees who have a significant role in the registrant’s control over financial reporting. |
|
Date: August 10, 2023 |
By: |
/s/ “Peter Evensen” |
|
Peter Evensen |
||
|
Principal Executive Officer |
Exhibit 31.2
CERTIFICATION
PURSUANT TO RULE 13a-14(a) OR 15d-14(a)
OF THE U.S. SECURITIES EXCHANGE ACT OF 1934
I, Chris Evensen, certify that:
|
1. |
I have reviewed this quarterly report on Form 10-Q for the fiscal quarter ended June 30, 2023 of Scandium International Mining Corp. |
|
|
|
|
2. |
Based on my knowledge, this report does not contain any untrue statement of a material fact or omit to state a material fact necessary in order to make the statements made, in light of the circumstances under which such statements were made, not misleading with respect to the period covered by this report; |
|
|
|
|
3. |
Based on my knowledge, the financial statements, and other financial information included in this report, fairly present in all material respects the financial condition, results of operations and cash flows of the registrant as of, and for, the periods presented in this report; |
|
|
|
|
4. |
The registrant’s other certifying officer(s) and I are responsible for establishing and maintaining disclosure controls and procedures (as defined in Exchange Act Rules 13a-15(e) and 15d-15(e)) and internal control over financial reporting (as defined in Exchange Act Rules 13a-15(f) and 15d-15(f)) for the registrant and have: |
|
a) |
designed such disclosure controls and procedures, or caused such disclosure controls and procedures to be designed under our supervision, to ensure that material information relating to the registrant, including its consolidated subsidiaries, is made known to us by others within those entities, particularly during the period in which the annual report is being prepared; |
|
|
b) |
designed such internal control over financial reporting, or caused such internal control over financial reporting to be designed under our supervision, to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles; |
|
|
c) |
evaluated the effectiveness of the registrant’s disclosure controls and procedures and presented in this report our conclusions about the effectiveness of the disclosure controls and procedures, as of the end of the period covered by this report based on such evaluation; and |
|
|
|
||
|
d) |
disclosed in this report any change in the registrant’s internal control over financial reporting that occurred during the registrant’s most recent fiscal quarter (the registrant’s fourth fiscal quarter in the case of an annual report) that has materially affected, or is reasonably likely to materially affect the registrant’s internal control over financial reporting; |
|
5. |
The registrant’s other certifying officer(s) and I have disclosed, based on our most recent evaluation of internal control over financial reporting, to the registrant’s auditors and the audit committee of registrant’s board of directors (or persons performing the equivalent function): |
|
a) |
all significant deficiencies and material weaknesses in the design or operation of internal control over financial reporting which are reasonably likely to adversely affect the registrant’s ability to record, process, summarize and report financial information; and |
|
|
|
||
|
b) |
any fraud, whether or not material, that involves management or other employees who have a significant role in the registrant’s control over financial reporting. |
|
Date: August 10, 2023 |
By: |
/s/ “R. Christian Evensen” |
|
Chris Evensen |
||
|
Principal Financial Officer |
EXHIBIT 32.1
CERTIFICATION
PURSUANT TO 18 U.S.C. SECTION 1350
AND RULE 13a-14(b) OR RULE 15d-14(b)
OF THE U.S. SECURITIES EXCHANGE ACT OF 1934
In connection with the Quarterly Report of Scandium International Mining Corp. (the "Company") on Form 10-Q for the fiscal quarter ended June 30, 2023 (the "Report"), the undersigned, in the capacities and on the date indicated below, hereby certifies pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002, that to his knowledge:
|
1. |
The Report fully complies with the requirements of Section 13(a) or 15(d) of the Securities Exchange Act of 1934; and |
|
2. |
The information contained in the Report fairly presents, in all material respects, the financial condition and results of operations of the Company. |
| Dated: August 10, 2023 | /s/ “Peter Evensen” | |
| Peter Evensen | ||
| Principal Executive Officer |
EXHIBIT 32.2
CERTIFICATION
PURSUANT TO 18 U.S.C. SECTION 1350
AND RULE 13a-14(b) OR RULE 15d-14(b)
OF THE U.S. SECURITIES EXCHANGE ACT OF 1934
In connection with the Quarterly Report of Scandium International Mining Corp. (the "Company") on Form 10-Q for the fiscal quarter ended June 30, 2023 (the "Report"), the undersigned, in the capacities and on the date indicated below, hereby certifies pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002, that to his knowledge:
|
1. |
The Report fully complies with the requirements of Section 13(a) or 15(d) of the Securities Exchange Act of 1934; and |
|
2. |
The information contained in the Report fairly presents, in all material respects, the financial condition and results of operations of the Company. |
| Dated: August 10, 2023 | /s/ “R. Christian Evensen” | |
| Chris Evensen | ||
| Principal Financial Officer |