Greetings, and welcome to the Leggett & Platt First Quarter 2024 Webcast and Earnings Conference Call. As a reminder, this conference is being recorded.

Good morning, and welcome to Leggett & Platt's First Quarter 2024 Earnings Call. With me on the call today are Mitch Dolloff, President and CEO; Ben Burns, Executive Vice President and CFO; Tyson Hagale, Executive Vice President and President of the Bedding Products segment; Ryan Kleiboeker, Executive Vice President and Chief Strategic Planning Officer; and Kolina Talbert, Manager of Investor Relations. The agenda for our call this morning is as follows: Mitch will discuss our near- to mid-term strategy and operating results, including a summary of the main points we made in yesterday's press release. Ben will cover capital allocation, additional financial details and address our outlook for 2024, and the group will answer any questions you have. This conference call is being recorded for Leggett & Platt and is copyrighted material. This call may not be transcribed, recorded or broadcast without our express permission. A replay will be available on the Investor Relations section of our website. We posted to the IR section of our website yesterday's press release and a set of slides that contain summary financial information along with segment details. Those documents supplement the information we discuss on this call, including our non-GAAP reconciliations. Remarks today concerning future expectations, events, objectives, strategies, trends or results constitute forward-looking statements. Actual results or events may differ materially due to a number of risks and uncertainties, and the company undertakes no obligation to update or revise these statements. For a summary of these risk factors and additional information, please refer to yesterday's press release and the sections in our most recent 10-K entitled Risk Factors and Forward-Looking Statements. I'll now turn the call over to Mitch.

Good morning, and thank you for joining our call today. First, I want to share that this will be Cassie's last earnings call with us as she will be leaving the company for an exciting new opportunity later this month. Cassie has been an instrumental part of our IR team since 2018 and has been an incredible asset to the company throughout her various positions over the last 19 years. We wish her the best in her new role and will sincerely miss her. Before reviewing first quarter results, I'd like to spend a few minutes discussing who we are, where we stand today and where we are going in the future. Across most of our businesses, we are positioned as a leading provider of differentiated engineered products with opportunities to increase content over time while collaborating with our customers to provide solutions. Our core businesses have strong market positions in industries with large and attractive addressable markets. In Bedding products, our 2019 acquisition of ECS significantly increased our addressable Bedding market, allowing us to expand into specialty foam and compressed mattresses, trends which have significantly changed the domestic bedding landscape in the last 10 years. Although the Bedding market has been challenged recently, the strategic rationale for that acquisition remains intact and should enable us to drive long-term growth and product innovation. In specialized products, all three of our businesses supply technically critical components that are developed with a deep customer relationship and collaborative design. For example, our Automotive business is aligned with trends of increasing comfort and convenience features. Our ability to partner directly with OEMs to solve specific problems means we compete on differentiation rather than just price. In Furniture, Flooring & Textile products, most of our businesses are mature and stable with steady margins and solid cash generation. These businesses tend to compete based on high levels of customer service or product differentiation and include our home furniture, work furniture and flooring operations. Within textiles, our Geo Components business leverages sourcing synergies from our fabric converting operations to supply fabrics for applications such as erosion control and landscaping. Geo Components competes in a fragmented industry with sizable opportunities for growth. With that context in mind, I'll now address our near- to mid-term strategic priorities, which are a blueprint for ensuring the sustainable long-term success of our business. Our priorities are: one, strengthening our balance sheet and liquidity; two, improving margins by optimizing operations and our general and administrative cost structure; and three, positioning the company for profitable growth opportunities. We're committed to maintaining our long-held financial strength and have recently taken action to support this objective. In March, we proactively amended the agreement for our existing revolving credit facility to provide us with additional liquidity and flexibility. The leverage ratio has increased from 3.5x to 4x through June 30, 2025, creating a bigger cushion in a time of near-term weak demand in residential end markets. Yesterday, we announced that the Board of Directors declared a quarterly dividend of $0.05 per share. The decision to reduce the dividend was made following a thorough evaluation. This action will free up capital to invest in driving improvements in our business and solidify our long-held financial strength. Additionally, we continue to advance our initiatives across our business to drive operational excellence and enhance our efficiency. We expect these initiatives will allow us to drive margin improvement and continue to strengthen our financial foundation in the near- to mid-term. Divested Bedding manufacturers are facing numerous challenges, including low demand, overcapacity and increased pressure from finished mattress imports resulting in financial stress across the industry. The domestic mattress market has changed dramatically in a relatively short time span. The landscape has shifted from a largely domestic OEM-produced innerspring mattress market to one where innerspring, foam and hybrid mattresses are sold at a wide range of price points through a variety of channels and produced by a mix of fewer large domestic OEMs, domestic private label producers and import manufacturers. These changes have effectively reduced the size of the domestic innerspring mattress market by one-third. While we anticipate that import mattresses will always have a place in the market, any volume reshored to the U.S. as a result of the ongoing anti-dumping case is beneficial for the domestic industry. In such a dynamic environment, we recognize that we must also make changes to profitably compete in the Bedding market today and in the future. Across our Bedding Products segment, we are executing on the restructuring plan announced in January to optimize our manufacturing and distribution footprint. We are making steady progress and remain on track to achieve our objectives. To date, we have closed four smaller U.S. Spring distribution facilities, transitioned manufacturing out of three facilities and into our four larger remaining spring production facilities and closed a small specialty foam operation. We still expect the consolidation activities within U.S. Spring to be completed by year-end and are currently downsizing our Chinese innerspring operation. Finally, two additional specialty foam facility consolidations are underway and should be complete by year-end. As previously announced, restructuring actions will be complete by the end of 2025. I want to thank our entire team for their dedication and hard work during this time of transition. Our rod, wire and spring business continues to have healthy margins as a result of our refocused strategy targeting higher value content combined with disciplined cost management from our operations team. However, volume recovery, restructuring activities and other operational initiatives will drive meaningful improvement. Specialty Foam is a significant drag on our company profits, but we continue to drive operational improvements and margin recovery through our four-wall manufacturing improvement plan. Efforts to diversify our customer base have seen initial success, but we have more work to do in the current low demand environment where many market participants are increasingly financially constrained. In Adjustable Bed, low demand and a market shift towards lower value products have been a meaningful drag on profit. We are working hard to reduce costs and simplify the supply chain to drive profit and cash flow improvements. Our European bedding business faces market conditions that are very similar to our domestic challenges. The team continues to drive profitability in innersprings, but has opportunities to improve our Kayfoam business where the customer base has changed significantly since acquisition. We remain confident that our unique positioning in the bedding industry enables us to drive value for our branded customers, and we are addressing our cost structure to do so as competitively as possible. In Specialized Products, operational improvement activities are ongoing within each business. In Automotive, the team continues to make good progress improving profitability. We continue to evaluate efficiency enhancement opportunities and options to leverage automation and vertical integration. In both Aerospace and Hydraulic Cylinders, efforts to improve production efficiencies are underway. In Hydraulic Cylinders, we are shifting some production to our operations in India to reduce cost and improve profitability. Restructuring initiatives in the Furniture, Flooring & Textile Products segment are also on track. We have closed a foreign products production line and redeployed the manufacturing equipment to one of our other production facilities. In Home Furniture, we closed one plant and have transferred that production to other remaining facilities. We expect to market that real estate by midsummer. In Work Furniture, we continue to explore opportunities to reduce cost and improve profitability. Beyond our manufacturing operations, we are evaluating our general and administrative cost structure to drive further improvements in profitability. Shifting our focus to the future. In the long-term, we plan to invest in key focus areas, including Bedding, Automotive and Geo Components. The changes underway now in our Bedding business support our future ability to drive product synergies across Specialty Foam and innersprings and capture greater product content through semi-finished and private label finished goods. We are committed to leveraging our capabilities in springs and foam to expand our hybrid mattress programs and drive value for our customers through product development activities. Additionally, we expect that future growth in adjustable beds will stem from higher attachment rates and innovative product designs tailored to meet consumer needs. In Automotive, we see growth potential in our convenience product offerings such as motors and actuators, particularly as vehicle technology and electrification increases. Our Geo Components business has grown via greenfields and small bolt-on acquisitions over time, and we anticipate further growth as we continue to expand our product lines and geographic footprint. We are confident that the actions we are taking in the near- to mid-term will better position us for the future and enhance shareholder value. Our current profitability does not meet our expectations, but we are taking the necessary steps to improve our performance. Moving on to first quarter 2024. Results were in line with our expectations at the beginning of the year. First quarter sales were $1.1 billion, down 10% versus the first quarter of 2023 from volume declines, primarily in residential end markets and raw material-related selling price decreases. First quarter EBIT was $63 million, down $26 million versus the first quarter of 2023. Adjusted EBIT was $64 million, down $25 million versus first quarter 2023. EBIT and adjusted EBIT decreased primarily from lower volume, increased bad debt reserve, less benefit from a reduction to a contingent purchase price liability associated with the prior year acquisition and the nonrecurrence of pandemic-related cost reimbursements. These decreases were partially offset by lower current year amortization expense. Restructuring costs during the quarter were $11 million, comprised of $6 million in cash costs and $5 million in non-cash costs. The restructuring charges were mostly offset by gains from idle real estate sales and insurance proceeds of $8 million and $2 million, respectively. First quarter earnings per share and adjusted earnings per share were $0.23, a 41% decrease from first quarter 2023 EPS of $0.39. Moving on to segment results. Sales in our Bedding Products segment decreased 15% versus first quarter 2023. Ongoing weakness in domestic and international Bedding markets negatively impact volume this quarter as demand continues to bounce along the bottom. U.S. spring volume was down 15% versus first quarter 2023, driven by declines in open coil and wire grids, partially offset by growth in higher-value semi-finished products such as combination pocket and eco-based. Domestic mattress market production was likely down high single digits, and we saw similar trends in comfort core demand. For the full year, we expect U.S. mattress consumption to be slightly down versus 2023. Sales in our Specialized Products segment decreased 1% compared to first quarter 2023. In Automotive, our volumes were in line with the market in the first quarter. We still expect our Automotive business will outperform Global Automotive production in 2024, primarily due to new programs initiating production throughout the year. We continue to experience strong demand and benefit from lengthy industry backlogs in our Aerospace business. First quarter volume was up 13% as industry production continues to recover from pandemic impacts. In Hydraulic Cylinders, first quarter sales were negatively impacted by softer demand in heavy construction markets and the lag timing of index-based price changes. For the full year, we anticipate flat demand with weakness in European heavy construction markets, offset by material handling backlogs in the U.S. Sales in our Furniture, Flooring & Textile Products segment were down 9% versus first quarter 2023. Demand in Home Furniture continues to be soft. We have recently seen stronger performance in Asia than in the U.S. and believe this is related to consumer trade down. Work Furniture demand also remains low. Pockets of improvements in contract markets are offset by softness in residential markets. We expect 2024 demand to be in line with 2023. In Flooring products, we anticipate another year of lower residential demand driven by lower levels of residential construction and remodeling activity. Hospitality demand has recovered slower than expected and remains well below pandemic levels. Within textiles, first quarter sales were negatively impacted by weak bedding and furniture demand within our Fabric Converting business, partially offset by growth in U.S. civil construction demand within our Geo Components business. We expect infrastructure funding will be a tailwind later this year and anticipate full-year demand in Geo Components will be modestly higher year-over-year. Despite an uncertain macroeconomic environment and challenging demand in residential end markets, our full-year sales and earnings guidance has not changed. Our ongoing initiatives, including our restructuring plan remain on track, and the management team is executing against our near- to mid-term strategic priorities outlined earlier. I'll now turn the call over to Ben to review our updated capital allocation priorities, additional first quarter financial details and our outlook for the year.

Thank you, Mitch, and good morning, everyone. As Mitch discussed in his remarks, our management team and Board of Directors have made the decision to reduce the quarterly dividend to $0.05 per share. We carefully evaluated our capital allocation priorities and determined that reallocating a large portion of cash spent on dividends to deleverage our balance sheet while continuing to invest in our business will enhance our financial position in the near term as weak demand in our residential end markets continues to pressure earnings. Additionally, cash generated from real estate sales will be used for debt reduction. We are targeting a long-term leverage ratio of 2x net debt to adjusted EBITDA, which we expect will allow us to maintain a solid investment-grade credit rating. In the long term, we expect to grow our business both organically and through strategic acquisitions, while also returning cash to shareholders via a combination of dividends and share buybacks. In the first quarter, operating cash flow was negative $6 million, a decrease of $103 million versus the first quarter 2023, primarily driven by lower accounts payable due to timing of purchases, reduced purchasing volumes and deflation as well as lower earnings. We ended the quarter with adjusted working capital as a percentage of annualized sales of 15.3%, an improvement of 50 basis points versus first quarter 2023. Cash from operations is now expected to be $300 million to $350 million in 2024 versus our prior guidance of $325 million to $375 million as we expect less benefit from working capital than previously anticipated. We ended the first quarter with total debt of $2.1 billion, including $279 million of commercial paper outstanding. Net debt to trailing 12-month adjusted EBITDA was 3.61x at quarter end. We expect our leverage ratio to modestly increase in the second quarter before improving as we progress toward our long-term target of 2x. We still expect to predominantly use our commercial paper program to repay $300 million of 3.8% 10-year notes maturing in November. Our amended credit agreement provides us with ample liquidity while we execute our current operating initiatives and navigate weak residential end market demand. The leverage ratio increased from 3.5x to 4.0x through June 30, 2025, and will revert to 3.5x as of September 30, 2025, remaining at that level until maturity on September 30, 2026. No other material changes were made to the credit agreement. Total liquidity was $806 million at March 31, comprised of $361 million cash on hand and $445 million in capacity remaining under our revolving credit facility. As Mitch stated earlier, our 2024 sales and EPS guidance range remains unchanged. 2024 sales are expected to be $4.35 billion to $4.65 billion, down 2% to 8% versus 2023, reflecting continued weak demand in our residential end markets, partially offset by growth in Automotive and our industrial end markets. Volume is expected to be down low- to mid-single digits with volume at the midpoint, down high single digits in Bedding Products, up low single digits in Specialized Products and down low single digits in Furniture, Flooring & Textile products. Deflation and currency combined are expected to reduce sales in low single digits. 2024 earnings per share are expected to be in the range of $0.95 to $1.25, including approximately $0.20 to $0.25 per share of negative impact from restructuring costs and $0.10 to $0.15 per share gain from the sale of real estate. Full year adjusted earnings per share are expected to be $1.05 to $1.35, primarily reflecting lower volume, pricing responses related to global steel cost differentials, modest metal margin compression and several expense items that were abnormally low in 2023 and are expected to normalize in 2024, including bad debt expense, a reduction to a contingent purchase price liability associated with the prior year acquisition and incentive compensation. These decreases are partially offset by lower amortization from the 2023 intangible asset impairment. Based upon this guidance framework, our 2024 full year adjusted EBIT margin range is expected to be 6.4% to 7.2%. EPS guidance assumes a full year effective tax rate of 25%, depreciation and amortization of approximately $135 million, net interest expense of approximately $85 million and fully diluted shares of 138 million. For the full year 2024, we assumed capital expenditures of $100 million to $120 million, dividends of approximately $135 million, reflecting two quarters of cash payments at $0.46 per share and two quarters at $0.05 per share and minimal spending for acquisitions and share repurchases. Lastly, I want to reiterate that we are proactively making changes where needed to strengthen our business and better position us to capture long-term opportunities. This discipline, combined with the dedication and hard work of our employees, will pave the way for future success.

Thank you, Ben. Operator, we're ready to begin Q&A.

Our first question is from Susan Maklari with Goldman Sachs.

My first question is I want to start on the dividend. I guess, Mitch, can you just give us a bit more perspective on how the board arrived at that $0.05? And maybe even some color on what it implies for the future earnings of Leggett? How do you think about what the business can generate once you get past the restructuring and all the changes that you're implementing? Just any color there on how we should be thinking about those two pieces.

Sure, Susan. Making a change to the dividend was, of course, a decision that we took very seriously. It was important for us to consider a variety of options in making that change as well as near and long-term impacts to our business. So the downturn in our residential end market demand has continued to pressure earnings for longer than we originally anticipated. As we went through this process, we shifted from considering it to be a question of how can we fund the dividend at the current level to whether we should fund the dividend at the current levels. As it became harder to balance our lower earnings, the increasing leverage and the elevated dividend payout ratio. We landed at the $0.05 because reducing to that level allows us to deleverage our balance sheet in a reasonable time frame, continue to invest in our business, which we've mentioned before, we hadn't been compromising CapEx or things like that. But as this dragged on and the payout ratio continued to be really high, it was putting us in a spot to maybe have to make some changes. It also gives us the flexibility to refine our portfolio in the future if we think that's appropriate. We remain committed to returning capital to shareholders, and we're not walking away from that priority, but we'll balance that with retaining the flexibility to invest in future growth. We'll also think about that, the shareholder returns, both through dividends and share repurchases over time. To your question about the future earnings, we still feel really good about the restructuring activity that's underway and some of the additional actions that we talked about in our reporting of operational improvements and looking at our G&A cost structure and things like that. We feel like we still see that improvement in our earnings even in this near-term low demand environment. We continue to see improvement in growth in Specialized Products earnings, and demand will start to come back at some point, but it's hard to estimate when that is, probably depends on interest rates and inflation and some things like that. We're really focused on dealing with the situation that we have on our hands today and driving improvement in our earnings in the near term, the midterm and then returning to longer-term growth when things normalize a bit. So we're confident in the situation we're in and the opportunities that we have, but we felt like this was an appropriate action to give us the flexibility that we need to run our business for the long term.

Okay. That's helpful color. And then just maybe digging a little deeper into one of the points that you made there, which is just a commitment to shareholder returns. I guess is the plan to continue to raise the dividend from here? Or should we expect that we're just going to stay at the $0.05 for a while and then sort of take things from there?

Well, I think, Susan, as we move closer to our leverage target, and that long-term target that's been mentioned of 2x is long term. It doesn't mean that we won't do anything until we get there. I think we'll continue to evaluate the situation. We definitely want to continue to give ourselves the flexibility and probably will have not as much of a focus on the dividend as we've had over the last five-plus years. We'll take advantage of flexibility between share repurchases and the dividend. We'll continue to evaluate that as we make progress in our earnings and our deleveraging.

Okay. All right. I just want to get one more in, which is that it does sound like the restructuring is on track, and that's progressing. Just anything, I guess, that has surprised you or that has been different as you've actually started to get a bit deeper into that process? And perhaps anything that could be changed or adjusted given that?

You're right. It is going very well, and things, I think, remain on track. But Tyson, do you want to comment because bedding is the biggest part of that?

Sure thing. Yes, it is on track. We're doing well with the plan. I'd say we're on track from both the timing and financial estimates that we've made as part of the plan. I think maybe what's been surprising is it's a heavy lift. There's a lot of activity across the segment and all of it has been well planned out and it's being executed really well. But in terms of maybe some things that are being a surprise, we decided we needed to move aggressively. We're adjusting to a fast-changing market and wanted to do this in an appropriate way. But I think we continue to find along the way, other opportunities that we can continue to drive cost improvement as part of the plan. I think that really gives us a lot of confidence back to what Mitch said about improving the longer-term margin profile is that we continue to find other opportunities to add to the restructuring plan and help us continue to drive efficiency while still supporting our customers and not jeopardizing that.

Our next question is from Bobby Griffin with Raymond James.

Mitch, I wanted to discuss the performance of the Bedding segment during the quarter. The industry consumption appears to be down in the high single digits, while the innerspring foam volume has decreased by 15%. What is causing this discrepancy? We've mentioned market share losses, but could this also be related to some of the restructuring initiatives where you've had to temporarily step away from certain business segments? Any additional insights on this would be helpful.

Tyson, I'll turn it over to you.

I’ll address that, Bobby. We are not stepping back from anything in the first quarter; that hasn’t been a concern. In fact, we released our sales attrition estimates early in the first quarter during our restructuring announcement. So far, it appears those estimates were conservative and lower than we initially expected. The main issue we’ve faced, which we’ve previously discussed, is the struggle with volume in both open coiling grids. This is due to a mix of shifts in product and consumer preferences and intense price competition in certain areas, particularly in open coil and lower-end commodity products. These factors continue to hinder overall volume in the long term, though we believe that our Comfort Core, particularly with our newer products, aligns better with the domestic market.

Tyson, do you think that the trend is stabilizing, meaning the incremental pressure is decreasing, or is it still increasing? Additionally, could you elaborate on whether there are improvements in spring manufacturing technology from other countries now compared to 5 or 7 years ago?

For sure. On the last part, Bobby, we have to recognize that we have some competitors making innerspring equipment internationally that are very capable, and they can make some good equipment, and that is a part of the market that we have to deal with at this point. We still feel good about what we can do internally and the efficiencies that we have with our steel business. But that is a challenge and something that we have to deal with. We have to be mindful that it's a very competitive market, especially right now where there is overcapacity that exists not just in finished mattresses but in components. It makes it a very aggressive marketplace right now, and we're going to have to continue to deal with that as long as we're in kind of this low demand environment, especially. But we think we're dealing with it well, and that's why we're also investing heavily in not just differentiated product offerings, but also trying to find cost solutions for our customers that get away from not just commodity products, but help them save money in their assembly process.

Sorry, Bobby, I was just going to add, this goes into our focus in those higher-value products, right? So we're not just chasing the low-value products but continuing the shift, and that's having a meaning positive impact.

That's right. Again, lower units overall, especially relative to some of the legacy products, but they have been successful so far, and we are seeing improvements there.

Okay. That's helpful. And then maybe switching gears a little just to overall raw material deflation. I've covered you guys for a while, and there was a typical relationship between kind of when you get the deflation, you hold on to a little bit and you'd see it help a little of the margins, but it would hurt obviously the top line. Is the business still behaving that way in a deflationary environment? Or has some of these pressures that have taken place caused the prototypical relationship that were used to on the street to be a little bit different when they experience deflation across some of its product categories?

Bobby, I think it's pretty similar. We just probably have a little bit different timing dynamics like with Specialty Foam. The timing is a bit different than what we'd see in innersprings. But I think it's probably pretty similar.

Okay. And then, Mitch, lastly for me is just regarding the steel mill. I think I mentioned this to you last quarter as well. It is part of the big vertically integrated strategy, but at the same time, is it operating at less than full capacity? This may be impacting the operations. Is this solely due to market conditions that need to improve? Or are there external sales strategies you could implement to bring it back to full capacity? Or are we simply at the mercy of the end market and the consumer?

Yes, I'll take that one again, Bobby. Yes, it is a drag. It is a high fixed cost operation, and it is something that running at below capacity is definitely impactful to our margins. But we do see that just over time, as products have changed, grids, as an example, that's been historically a big use of rod tons, and we see a pretty permanent shift in the attachment rate for that long term. It does require us to go out and diversify in some of the markets we can serve. We are actively doing that. We have seen even over the last year where some of the industrial markets were stronger, that there's been some more weakness there. So that's still a challenge in the near term. But we are actively looking at other end markets, more in industrial markets that help us offset some of that. We're not just solely relying on the recovery of the spring market.

Our next question is from Peter Keith with Piper Sandler.

I actually want to ask a few follow-ups. So to Susan's question on capital allocation, you've mentioned maybe not a focus on dividends like you have been in the last 5 years. I guess it applies maybe thinking about share repurchases. The question is, are you thinking about getting to 2x net leverage as that target before you contemplate acquisitions or share repurchases? Or are you going to be opportunistic? I guess just trying to understand the timing of when some of the cash return to shareholders could pick up?

Yes. Thanks for asking that question. We've tried to comment on that, but I'm glad to clarify. The 2x leverage target is a long-term target and we will try and be opportunistic along the way. It's a priority. We want to make sure we're maintaining our investment-grade credit ratings and access to commercial paper. But that doesn't mean that we won't pass up opportunities, for example, small bolt-on acquisitions or things like that. Nothing is on the list right now, but we do plan to maintain some flexibility. But Ben, anything you would add there?

Yes, I agree. As we progress with our debt reduction, it will allow us the flexibility to explore additional growth opportunities. If we were to allocate all our available free cash flow to reducing debt, it might take a couple of years. However, as we continue to make progress, we will be able to consider those other opportunities more readily. Flexibility is key, and we will be ready to act on new opportunities as they arise.

Okay. Very good. And then to follow up on Bobby's question regarding spring competition. I think you had referenced there's some larger international players that are competitive. What about the domestic market? It does seem like there's more spring factories popping up in the U.S.? Has the level of U.S. domestic competition also intensified in recent years?

Peter. Yes, we have seen some of that. Bobby asked a question about equipment. That's something, especially during the pandemic, that we saw a horizon with some of the capacity adds. Some of that has also come from a result of the antidumping cases where we've seen some reshoring of mattress production in the U.S. So some of it that wasn't part of our addressable market to begin with, it's being imported, and now we're competing with them domestically. We have seen that as part of the market, and that's part of what we're talking about with the changing domestic market and why we're making adjustments in our business as well.

Okay. Very good. And then last one for me is that last quarter, you had referenced that some customers were looking to improve their financial position and that could negatively impact your sales. You took the impairment charge on the Specialty foam business. The heart of the question is, some of those lost sales, I guess, customers might be going elsewhere or shutting down. Did that show up fully in Q1, or is there more impact to come as we think about Q2 and going forward from these customer changes?

I'll address that as well, Peter. We noticed a general slowdown among some accounts, but it was more aligned with the market trends in the first quarter. The impacts we've discussed earlier and the impairment charge we're taking will become more evident in the latter half of the year, which is reflected in our guidance.

Okay. So I'll just follow up on that. So I understand the guidance; no one has a perfect crystal ball. But certainly, like if we look at Bedding, you have units down high single. I guess that from where you're trending first half of the year, it does imply some healthy improvement in the back half. Is this a function of compares? It does seem like you've got the customer headwind coming. What gives the confidence in that general improvement as we look to the back half of the year?

Ben, I'll let you take that one. But I mean, there's some seasonality too, particularly in Automotive and things like that.

Yes. And then I'd say on the Bedding side, it's really the comparisons get a bit easier in the back half of the year.

Yes. We really, from a demand standpoint, plan for it to be more of the same. What we saw late last year, we haven't forecasted any optimistic recovery or anything like that in demand, and we have baked in the customer attrition that we're talking about.

Our next question is from Keith Hughes with Truist Securities.

A couple of questions. First, on the dividend. I understand why you're cutting the dividend. I'm a little confused on why that dividend in February was paid at the old rate. I mean the landscape looks very similar to what you thought in the last earnings release, probably what you were forecasting in January. Can you go through the thought process of the Board of the path that we got to where we are right now?

Yes. I tried to comment on this area, Keith, but I mean it really goes back to how seriously we took that decision, and we wanted to do the work that we needed to explore the various options that were in front of us and what the impacts were for us, both in the near and the long term. It was a long and vigorous and thorough discussion and investigation of different opportunities. That’s how the timing worked out.

Okay. So you brought up the long-term ramifications of this. So you've got a big restructuring plan you're working on that. There's a lot of cost takeout and things like that. But without a big dividend, it kind of changes how the stock is going to trade. I guess my question is, will there be a real look inside this portfolio to say what businesses are really growth engines moving forward in which may be ones you don't need to be in in the future?

Yes, great question, Keith. Portfolio management is always something that's on our radar. We think about and have conversations about the complexity of our business and what we do to simplify that, and it means not only our portfolio, but even within some of our business units, there's a lot of complicated elements to it. So it's something that is definitely always on our radar and that we'll continue to dig into. I don't want to sound like that it's not something that's on our radar, but I think we have work to do to determine where we go.

Thank you for joining us and your interest in Leggett & Platt. Have a good day.

This concludes today's conference. You may disconnect your lines at this time. Thank you for your participation.