Good morning, and welcome to the Manitowoc Company 4th Quarter 2025 Earnings Conference Call. All participants will be in listen-only mode. Should you need assistance, please signal a conference specialist by pressing the star key, followed by zero. After today's presentation, there will be an opportunity to ask questions. To ask a question, you may press star, then 1 on your telephone keypad. To withdraw your question, please press star, then 2. Please note, this event is being recorded. I would now like to turn the conference over to Ion Warner, Senior Vice President, Marketing and Investor Relations. Please go ahead.

Good morning, everyone, and welcome to our earnings call to review the company's fourth quarter and full year 2025 financial performance and business update, as outlined in last evening's press release. Joining me this morning with prepared remarks are Aaron Ravenscroft, our President and Chief Executive Officer, and Brian Regan. our Executive Vice President and Chief Financial Officer. Earlier this morning, we posted our slide presentation to the Investor Relations section on our website, www.manitowoc.com, which you can use to follow along with our prepared remarks. Please turn to slide two. Before we start, please note our Save Harbor Statement and the material provided for this call. During today's call, forward-looking statements as defined in the Private Securities Litigation Reform Act of 1995 are made based on the company's current assessment of its markets and of other factors that affect its business. However, actual results could differ materially from any implied or actual projections due to one or more of the factors, among others, described in the company's latest SEC filings. The Manitowoc Company does not undertake any obligation to update or revise any forward-looking statement, whether the result of new information, future events, or other circumstances. And with that, I'll now turn the call over to Aaron.

Thank you, Aion, and good morning, everyone. Please turn to slide three. To start, I'd like to express my appreciation to our team for their hard work and never-ending passion for our company and for our customers. With their grit and determination, we delivered solid results in the fourth quarter. 2025 was a hard-fought year. Given the great trade reset in the U.S., the operating environment wasn't exactly as we anticipated. Even so, the Middle East remained strong, and we began to see green shoots in Europe and Asia Pacific. We also continued to make great progress on our crane-specificity strategy. Our non-new machine sales grew 10% to $690 million, reaching another record. We continued to grow our aftermarket footprint, adding territory coverage in North Carolina, South Carolina, and Georgia in the United States, and several key provinces in France. In addition, we opened or upgraded new locations in Nashville, Phoenix, and Baton Rouge in the U.S., Sydney, Australia, and two locations in France. Lastly, we grew our field service technician population to over 500. equally important to growing our aftermarket presence new product development is the life blood of our company and critical to growing our population of cranes in the field at the very end of 2024 we launched the mct 2205 which is the largest topless tower crane that we've ever produced we sold 19 of these units last year which was a great result during 2025 we launched 11 new cranes including the grt 550 rough terrain a five axle hybrid altering crane and the mcr815 which the largest Luffing Tower crane that we've ever sold. In March, we will unveil two more special cranes at ConExpo. We will launch an 80-ton boom truck, which is the largest boom truck that we've ever produced, and we will launch an eight-axle 700-ton all-terrain crane, which is also the largest all-terrain crane we've ever developed. A big thank you to our engineering teams. It's been a big lift to extend our product portfolio into these higher ranges. Please turn to slide Turning our focus to the Manitowoc way, I'm extremely pleased that we achieved an RIR of 0.94. For the first time in our company's history, we reduced our recordable injury rate below one. We also reduced our first aid incidents by 10% year-over-year. For some perspective, in 2015, we had 91 recordable injuries. In 2025, we had just 42. Our long-term goal remains zero injuries. Next, I would like to announce our CEO awards for the Manitowoc Way. Although our teams in the factories continued to do an awesome job, I was pleased that our winners came from the front end of our business. I'm happy to announce our MGX Branson Chesapeake was recognized for their new Blast Hopper concept, which was built by one of our welders. It increased operational efficiency by 70% and improved safety. Second, our sales team in Portugal was recognized for their work that they did on a large military contract in Spain. In addition to selling multiple cranes, the team helped the customer with all of their rigging hardware needs, offering a complete suite of lifting products. Lastly, I want to recognize three outstanding team members who received this year's CEO Award for their exceptional service to our customers. Stefan Dumont, Vitaly Artemave, and Nick Bird. Congratulations to each of them for their leadership and unwavering commitment to our customer success. Their entrepreneurial spirit inspires all of us to strive for excellence in serving our customers. Please move to slide five. Turning our attention to the market, we generated orders of $803 million during the fourth quarter, up 56% year-over-year. Backlog ended the year at $794 million, up 22% from a year ago. Regionally, the Americas remains pretty complicated. A year ago, U.S. elections fueled customer sentiment. However, that momentum was reversed by the tariff situation, which still remains fluid. Folks want and need new cranes, but they are waiting to the very last minute to place orders. Our fourth quarter orders were highlighted by three large orders in December, which secured build slots for these dealers and customers throughout 2026. Rental rates have remained flat, which is my biggest concern. Regardless of the specific tariff, the cost of new cranes is going up, and rental rates need to follow for crane operators to justify the purchase of new cranes or fleet renewals. Overall, dealer inventory is okay. It's not desperately low, nor is it concerningly high. In Europe, we continue to see improvement driven by several new economic programs across the continent. Without a doubt, the tire crane market has improved significantly. New machine orders were up 64% year-over-year during the fourth quarter. I was with a couple of our key dealers in early January, and their sentiment is a lot better than it was a year ago. Similarly, mobile crane orders in the quarter were up 39% year-over-year. Customers are beginning to feel better about the outlook on project work throughout the region. In the Middle East, I remain fairly optimistic, but the ride is definitely getting bumpier. In Saudi, while projects are moving forward, cash continues to tighten, which is making folks nervous. In Dubai, the large residential projects, which are skyscrapers by American standards, remain extremely hot. The Stargate Data Center project, however, in Abu Dhabi is moving slower than I anticipated. The tower crane work on phase one has been completed, and surprisingly, phase two has not yet started. Meanwhile, the new Dubai airport has already left the first three construction packages, and the fourth is under review. So the groundwork is underway, and I would expect to see tower crane work sometime this year. The Asia-Pacific market resembles Europe. Momentum and sentiment are improving, and South Korea optimism has grown despite a still weak currency, bolstered primarily by the announcement of large Samsung and SK Hynix semiconductor projects. Ashrai reflects a similar positive trend. We are waiting for the green light on a major power transmission project, which should provide a meaningful boost in sentiment. With that, I'll pass it on to Brian to walk you through the financials before I close with an update on our strategy.

Thanks, Aaron, and good morning, everyone. Please turn to slide six. Our fourth quarter results were in line with our expectations and prior guidance, demonstrating solid performance and resilience despite ongoing volatility in global markets and the continued headwinds from tariffs. We delivered strong orders for the quarter and achieved trailing 12-month non-new machine sales of $690 million. In addition, we made meaningful progress in reducing our working capital, generating $78 million of free cash flows during the quarter. Quarterly orders totaled $803 million, driven by whole goods stocking orders in the Americas after two quarters of lagging orders and the continued improvement in the European tower crane demand, where we saw a 64% increase in new crane orders year over year. Year-end backlog was $794 million, up 22% versus the prior year. Net sales for the quarter were $677 million, up 14% year-over-year, supported by strong shipments in North America, European tower cranes, as well as continued growth from our non-new machine sale strategy, which reached $191 million. dollars. Adjusted EBITDA for the quarter was $40 million, up $5 million year-over-year, representing a margin of 5.8 percent. Tariffs unfavorably impacted results by $4 million during the quarter. SG&A expenses were $89 million, or 13.2 percent of sales. Please turn to slide 7. From a full-year perspective, net sales were $2.24 billion. Non-new machine sales were $690 million, a 10% increase year-over-year, reflecting great progress on our Cranes Plus 50 strategy. As a reminder, prior to launching this strategy in 2021, our 2020 non-new machine sales were $376 million. We continue to grow this recurring revenue stream, and our goal remains $1 billion. Adjusted EBITDA was $122 million for the year, in line with our expectations. Adjusted EBITDA margin declined 50 basis points to 5.4%, primarily due to higher SG&A and incremental tariff costs, partially offset by stronger European tariff crane results. Tariffs had a gross unfavorable impact of $39 million for the year, and consistent with our expectations, we're able to mitigate approximately 85% of these headwinds through targeted pricing and sourcing actions. On a GAAP basis, our provision for income taxes was $5 million. GAAP diluted income per share was $0.20, and on an adjusted basis, $0.32, a decrease of $0.09 from the prior year. Net tariffs resulted in $0.13 of unfavorable impact to DEPs on a year-over-year basis. Cash flows from operations for the year were $22 million, which was negatively impacted by payments of approximately $45 million associated with the settlement of the EPA matter. Capital expenditures were $38 million, including $19 million for rental fleet investment. Free cash flow was a use of $15 million, and we ended the year with a cash balance of $77 million. Excluding the EPA matter, free cash flow was $30 million. Our net leverage ended the year at 3.15 times, and total liquidity was a healthy $298 million. Please turn to slide 8. We expect improved results in 2026 with net sales in the range of $2.25 to $2.35 billion and adjusted EBITDA between $125 and $150 million. When looking at the midpoint of our guidance, the expected improved results are driven by, one, pricing to offset the incremental tariff headwind, two, the European tower crane market, three, continued growth in our non-new machine business. Additionally, we implemented a restructuring plan to streamline our organization with projected savings of roughly $10 million in 2026. These projected savings are expected to offset inflation and foreign currency headwinds. We project free cash flow to be $40 million to $65 million, which includes $45 to $50 million in capital expenditures. We expect to improve our net leverage to below three times during the year, improving our liquidity and adding flexibility for strategic investments. With that, I'll turn the call back to Aaron for closing remarks.

Thank you, Brian. Please turn to slide nine. Looking back, 2025 was not the year that we expected, but there's plenty of optimism as we move forward. Europe and Asia Pacific are moving in the right direction, and the Middle East business remains positive. The American market appears poised for a rebound, with interest rates trending down and the tariff environment stabilizing. Fundamentally, fleets continue to age, and at some point, a major refresh will be required. Strategically, we continue to execute our Cranes Plus 50 strategy. We have new locations planned in Portugal, Mexico, Chile, and France, and we continue to hire field service techs. Recently, we also announced a new distribution agreement with HIAB where MGX will represent their products across 13 states. We're really excited about this opportunity given the synergies between knuckle boom cranes and boom trucks. In line with our Cranes Plus 50 strategy, we continue to expand our portfolio of lifting solutions. In closing, our long-term aspirational goal is simple. We want to achieve a return on invested capital of 15%. While stronger in-market demand will certainly help, the key lies in continuing to grow our non-day machine sales, which is far less cyclical and delivers gross margins around 35%. I am confident that we are making progress and moving in the right direction. As Warren Buffett wisely said, someone is sitting in the shade today because someone planted a tree a long time ago. We continue to grow our orchard at Manitowoc. And with that, operator, please open the lines for questions.

We will now begin the question and answer session. To ask a question, you may press star, then 1 on your telephone keypad. If you are using a speakerphone, please pick up your handset before pressing the keys. To withdraw your question, please press star, then 2. At this time, we will pause momentarily to assemble our roster. Our first question today is from Jerry Revich with Wells Fargo. Please go ahead.

Hey, this is – sorry, it's not Jerry. It's Kevin Uherik on for Jerry Ravich. How are you guys? Good, Kevin, thank you, Kevin. Yeah, so first question that I had was about the 2026 outlook. How should we think about the sales growth by region, which regions are expected to show the highest growth, and what products are contributing?

Yeah, I think from a regional standpoint, our tower crane business continues to do strong, and the expectation it'll continue into 2026 to be a tailwind for us. And, you know, that's the tower cranes. You know, U.S. is a bit of a mixed bag. While, you know, we did see some good orders and we got a good backlog, I think, you know, the tariff still creates some headwind for us, hence why we're doing the restructuring action.

Gotcha, gotcha. And then for the crane plus 50 strategy, could we talk about how to think about it through 26 and the cadence?

yeah so i mean in terms of our cadence i'd say it's pretty i mean it's pretty flat across it the only thing that goes up and down is the used so we look at non-new machine sales heading into the year i think we're in a good position relative to the number of texts we've added number of locations we've added uh that being said you know we do have some headwind because we've had some good used sales the last couple years and tariffs have thrown a little bit of a wrench in there in terms of moving units from from europe to the united states but uh yeah i mean i think it's probably safe in terms of a modeling standpoint to just assume that it's roughly the same every

quarter. Don't you think, Brian? Yeah. Yeah. I think, like you said, I think the used, the Q4, we had a good used quarter. So we saw, we saw a good, good revenue number from a margin standpoint. The used is a little bit less than, than the normal margin in our non-new machine sales. So, you know, with, with expected lower revenue on, on the, on the used next year, I think, you know the margin should be a little bit better yeah okay got it that's all i have for questions

thank you thanks kevin again if you have a question please press star then one please stand by as we pull for questions showing no further questions this concludes our question

and answer session gary a couple of emails that that have come my way with questions so i'll just ask the question and have management answer. The first question that came in was, what are

your orders in January? I'll take that one. So in terms of our orders in January, very, I would say good month, approximately $225 million. When I look at it in terms of the, you know, where the good news came from, we've entered our winter campaign for Tower Cranes. That was a good program for us. So that's the first time in a few years we've had a good winter campaign. So that was good. In North America, of course, we had some large stocking orders during the fourth quarter. So it was down a little bit, but overall, I would say it was still a pretty good number. Demand for large RTs and crawlers has been really good. So pleased to see the continued

progress in January. So yeah, good month. Okay. We received another question by email and I'll read it. Can you give us an update on the Manitowoc Way and your implementation of lean

at the company yeah so i mean these days i sort of look at the manitowoc way in in three buckets first on the shop floor i'm really really proud of the things that we're doing you know a good example i was in france a couple weeks ago and the team is really i'd say honed in on the details now where it's not just sort of talking about five minutes but really diving into how do we apply smed changing out machine tools how we're programming robots so i feel like we're well along our way and the team doesn't need much help. We can be more of a cheerleader on that side of the business. In terms of the office, I'm still super excited to see what we can do with AI. I think that's going to give us a lot of tools to crunch data that we really couldn't attack in the past. We've had a couple smaller wins so far, but nothing to brag about, I would say just yet. And then lastly, when I look at the company, the more we continue to invest in the mgx and the aftermarket non-new machine sales and all these new locations we've got a lot of work to do on that and in terms of sharing lessons learned i find lots of creative solutions when i go visit the locations but we're not sharing them the way i would say that we do at the factory level so i'd say that's really our focus uh in the next couple years is how do we get better and really focus on the customer experience so it's nice to see that what we're doing with lean is starting to apply in lots of different applications than just a shop floor.

Got it. Got another one about the seasonality. How you see the first quarter looking?

I'll take that one. While we don't give quarterly guidance, I think, you know, we do expect 2026 to be similar in that Q2 and Q4 are generally our strongest quarters. Specifically related to Q1, I think we've got a few headwinds where Q1 will be impacted by, one being tariffs. The big tariff hit came really in the second part of the year, so we have that headwind. Also, FX will impact us negatively in the first quarter, and the restructuring actions that we took are going to be a positive impact later on in the year. So I think Q1 will be, unfortunately, a little bit low relative to the rest of the year. Anything else, Ian?

No, those are the inbound questions that I got in my email.

With no further questions, I would like to turn the conference back over to Ian Warner for any closing remarks.

Thanks, Gary. Please note our replay of our earnings call will be available later this morning by accessing the investor relations section of our website at www.manitowoc.com. Thank you, everyone, for joining us today and for your continued interest in the Manitowoc Company. We look forward to speaking with you next quarter.

The conference is now concluded. Thank you for attending today's presentation. You may now disconnect.