Omnitek Engineering Corp 10-K/A for FY2024
Omnitek Engineering Corp (OMTK)
About this 10-K/A
Omnitek Engineering Corp filed this 10-K/A on April 16, 2025, covering the fiscal year ended December 31, 2024 (FY2024).
Headline figures
Fiscal year ended December 31, 2024, as reported in this filing, compared with the same period a year earlier where the filing states it.
- Revenue
- $1.02M
- down 3.4% from $1.06M a year earlier
- Net loss
- $167.14K
- compared with a net loss of $215.41K a year earlier
UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
WASHINGTON, D.C. 20549
___________
FORM
___________
EXCHANGE ACT OF 1934
For the fiscal year ended
Commission File Number:
___________________________________
(Exact name of Registrant as specified in its charter)
| ||
(State or other Jurisdiction of Incorporation or Organization) |
| (IRS Employer Identification No.) |
| ||
(Address of principal executive offices) |
| (Zip Code) |
Registrant’s telephone number, including area code:
Securities registered under Section 12(b) of the Exchange Act:
Title of each class | Trading Symbols(s) | Name of each exchange on which registered |
N/A |
|
|
Securities registered under Section 12(g) of the Exchange Act: Common Stock, No Par Value
Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.
Yes o
Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or 15(d) of the Exchange Act.
Yes o
Indicate by check mark whether the issuer (1) filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.
Page 1
Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).
Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company, or an emerging growth company. See definitions of “large accelerated filer,” “accelerated filer”, “smaller reporting company” and “emerging growth company” in Rule 12b-2 of the Exchange Act.
o Large Accelerated Filer | o Accelerated Filer |
|
|
x | |
| |
If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. o
Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).
Yes
The aggregate market value of the voting and non-voting common equity held by non-affiliates computed by reference to the price at which the common equity was last sold, or the average bid and asked price of such common equity, as of June 30, 2024, was $
As of April 15, 2025, there were
Documents Incorporated By Reference: None.
EXPLANATORY NOTE
This Amendment No. 1 on Form 10-K/A (the “Amendment”) of Omnitek Engineering Corp. (the “Company”) amends the Company’s Annual Report on Form 10-K for the year ending December 31, 2024, originally filed with the Securities and Exchange Commission on April 15, 2025 (the “Original Report”). This Amendment is being filed solely for the purpose of making corrections to the Date and Signature of Auditors Report.
Except as described above, no changes have been made to the Original Filing and this Amendment does not modify, amend or update in any way any of the financial or other information contained in the Original Filing. This Amendment does not reflect events that may have occurred subsequent to the Original Filing Date.
Page 2
OMNITEK ENGINEERING CORP.
Report on Form 10-K
| Page | |
Forward-Looking Statements |
| |
|
| |
PART I. |
| |
Item 1. | 5 | |
Item 1A. | 10 | |
Item 1B. | 20 | |
Item 1C. | 20 | |
Item 2. | 22 | |
Item 3. | 22 | |
Item 4. | 23 | |
|
| |
PART II. |
| |
Item 5. |
23 | |
Item 6. | 24 | |
Item 7. | Management’s Discussion and Analysis of Financial Condition and Results of Operations | 24 |
Item 7A. | 27 | |
Item 8. | 27 | |
Item 9. | Changes in and Disagreements with Accountants on Accounting and Financial Disclosure | 28 |
Item 9A. | 28 | |
Item 9B | 29 | |
Item 9C. | Disclosure Regarding Foreign Jurisdiction that Prevent Inspections | 29 |
|
| |
PART III. |
| |
Item 10. | 30 | |
Item 11. | 33 | |
Item 12. | Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters |
35 |
Item 13. | Certain Relationships and Related Transactions, and Director Independence | 38 |
Item 14. | 39 | |
|
| |
PART IV |
| |
Item 15. | 40 | |
Item 16. | 40 | |
Page 3
FORWARD-LOOKING STATEMENTS
This report contains statements about the future, sometimes referred to as “forward-looking” statements. Forward-looking statements are typically identified by use of the words “believe,” “may,” “could,” “should,” “expect,” “anticipate,” “estimate,” “project,” “propose,” “plan,” “intend,” and similar words and expressions. Statements that describe our future strategic goals, plans, objectives, and predictions are also forward-looking statements. These forward-looking statements may relate to, among other things, trends affecting our financial condition or results of operations, our business and growth strategies, and our financing plans. Forward-looking statements involve known and unknown risks, uncertainties, and other factors that may cause our actual results, performance, or achievements to be materially different from any future results, performance, or achievements expressed or implied by such forward-looking statements.
Forward-looking statements involve various risks and uncertainties. The forward-looking statements in this report are based on present circumstances and on our predictions respecting events that have not occurred, that may not occur, or that may occur with different consequences from those we now assume or anticipate. Important risks and factors that could cause our actual results to be materially different from our expectations are generally set forth in “Risk Factors,” “Management’s Discussion and Analysis of Financial Condition and Results of Operations,” “Description of Business,” and other sections in this report.
You should read this report and the documents we refer to thoroughly with the understanding that our actual future results may be materially different from and worse than our expectations.
This report contains statistical, market, and industry data we obtained from various publicly available government publications and industry-specific third-party reports, all of which are typically based on a number of assumptions. If any one or more of the assumptions underlying this data is later found to be incorrect, actual results may differ from our projections based on these assumptions. In addition, the rapidly changing nature of our customers’ industries, preferences, and choices results in significant uncertainties in any projections or estimates relating to the growth prospects or future condition of our target markets. You should not place undue reliance on these forward-looking statements.
Unless otherwise indicated, statements in this report concerning economic conditions and our industry are based on information from independent industry analysts and publications, as well as our estimates. Except where otherwise noted, our estimates are derived from publicly available information released by third-party sources as well as data from our internal research and are based on such data and our knowledge of our industry, which we believe to be reasonable. None of the independent industry publication market data cited in this report was prepared on our or our affiliates’ behalf.
The forward-looking statements made in this report relate only to events or information as of the date on which the statements are made in this report. Except as required by law, we undertake no obligation to update or revise publicly any forward-looking statements, whether as a result of new information, future events or otherwise, after the date on which the statements are made or to reflect the occurrence of unanticipated events. You should read this report and the documents we refer to in this report and have filed as exhibits to this report completely and with the understanding that our actual future results may be materially different from what we expect.
Any forward-looking statements, including those regarding our management’s current beliefs, expectations, anticipations, estimations, projections, proposals, plans, or intentions, are not guarantees of future performance, results, or events and involve risks and uncertainties, such as those discussed in this report.
Forward-looking statements speak only as of the date of the document in which they are contained, and we do not undertake any duty to update our forward-looking statements, except as may be required by law, and we caution you not to rely on them unduly.
Unless otherwise noted, references in this report to the “Company,” “Omnitek,” “we,” “our,” or “us” means Omnitek Engineering Corp.
Page 4
PART I.
ITEM 1. BUSINESS
General Development of Business
Omnitek Engineering, Corp., a California corporation, began operations on October 10, 2001, and was a spin-off from Nology Engineering, Inc., a manufacturer in the automotive aftermarket parts industry and the developer/manufacturer of the patented “HotWires” spark plug wires. Our business is located at 1345 Specialty Dr. #E, Vista, California, 92081, which consists of approximately 11,751 square feet of industrial space. Omnitek has never filed for bankruptcy and has never been subject to receivership or similar proceedings.
Business of Issuer
Omnitek develops and sells proprietary technology to convert diesel engines to an alternative fuel, new alternative fuel engines and complementary products. Omnitek products are available for stationary applications and the global transportation markets -- including light commercial vehicles, buses, heavy-duty trucks, as well as rail and marine applications. The technology can be applied for compressed natural gas (“CNG”), liquefied natural gas (“LNG”), renewable natural gas (“Biogas” or “RNG”), or Hydrogen (“H2”), as well as liquid petroleum gas (“Propane” or LPG”).
Omnitek’s technology enables the conversion of most diesel engines to operate on alternative fuels at a cost lower than that required to purchase a new alternative fuel engine.
Engine conversions in the United States are subject to U.S. Environmental Protection Agency (“EPA”) or California Air Resources Board (“CARB”) approvals. Engine conversions in certain foreign countries may require additional or different approvals. With fuel cost being the primary market driver, the Company anticipates the majority of its business will be generated in markets where diesel fuel is more expensive than gaseous fuels for the foreseeable future. Additionally, it is expected that the 200-nation “Paris Agreement on Climate Change” and other local regulations designed to lower air pollution, will further increase demand for Omnitek’s technology.
Omnitek is able to also deliver complete new natural gas engines when local emission standards, or other conditions, require the use of new engines.
Principal Products or Services.
Omnitek’s current product line includes:
·A kit for converting diesel engines to run on an alternative fuel;
·New complete natural gas engines;
·A high-pressure natural gas coalescing filter; and
·Natural gas engine components.
Conversion Kits - Omnitek offers a solution to convert most diesel engines to operate on an alternative fuel, including CNG, LNG, RNG, H2 or LPG. This product is packaged in kit form and is offered in two basic variations. One is designed to work on engines equipped with a turbocharger and the other is designed to work on engines without a turbocharger.
Diesel engines have a service life of up to 20 years and require regular engine overhauls. A diesel engine conversion is not unlike an engine overhaul. Therefore, the Company’s engine conversion system enables a fleet to “overhaul/convert” its diesel engines into an alternative fuel during a regularly scheduled engine overhaul, thereby reducing overall operating costs and emissions.
Diesel-to-natural gas engine conversions offer fleet operators the opportunity to secure their investment and capitalize on the long service life of diesel engines.
Page 5
At this time the Company has received US, EPA approval for the Navistar DT466E and DT530E engine models, and a Certificate of Conformity for the Mack E7, Detroit Diesel Series 60 and Caterpillar 3406E/C15 engine models, as well as EURO VI certification from the European Union for the OT13 heavy-duty 13-liter natural gas engine.
In addition to the Conversion Kits, Omnitek sells individual replacement parts for the conversion kits and a high-pressure natural gas coalescent filter.
The key to the success of Omnitek’s technology is performance and reliability, which is achieved using the Company’s patented fuel-mixing device and an electronic control unit (ECU) which senses engine parameters in real time and instantly adjusts to deliver the correct amount of fuel and the correct ignition timing.
Omnitek does not perform installations of the conversion kits directly, but rather trains dealers and sub-dealers around the world to perform the engine conversions using the Omnitek technology.
Most diesel engines can be converted using Omnitek’s technology, however, there is no assurance that diesel vehicle owners will elect to convert their diesel engines to an alternative fuel. Additionally, while the Company is not aware of any other company offering engine conversion solutions for most heavy-duty diesel engines that can compete with our patented technology at this time, competitors could develop such technology and there are no guarantees that the owners of the engines would choose the Omnitek conversion technology over our competitors’ technology to convert their engines.
Markets
Worldwide
The Company has the ability to sell and deliver its products anywhere in the world through its network of distributors, system integrators, fleet operators and engine conversion companies. The Company's conversion technology has been used to convert heavy-duty diesel engines to operate on natural gas worldwide since 2001 and has been successfully adapted to work with many different engine designs and configurations. More than 5,000 engines have been converted worldwide utilizing the Omnitek technology.
The governments of many countries with an indigenous supply of natural gas encourage the use of their domestic fuel supply and may offer incentives to convert vehicles currently running on diesel, which is expected to increase demand for our product in those regions.
When contacted, we approach the issue of “converting or replacing” high-polluting diesel engines by offering two main options, which in large part is influenced by the level of technological capabilities within the country, emission requirements, and financial feasibility.
The first option is focused on collaborating with local companies in an effort to convert diesel engines to an alternative fuel.
To achieve the conversions, we can supply engineering support to convert the engines locally. This offers an economic benefit to the local economy by keeping the rebuild work in the community.
In the second scenario, we would supply new low-polluting, alternative fuel engines. This may be a better option when the existing engines are based on old and outdated technology and/or strict emissions standards are in place.
Regulations
Engine conversions in the United States are subject to regulations imposed by the U.S. Environmental Protection Agency (“EPA”), and in California, the California Air Resources Board (“CARB”). At this time, the Company has received U.S. EPA approval for the Navistar DT466E and DT530E engine models, and a Certificate of Conformity for the Mack E7, Detroit Diesel Series 60 and Caterpillar 3406E/C15 engine models.
Engine conversions in Europe, and certain other regions, are subject to regulations imposed by the European Union (“EU”), or other local authorities. The Company has received EURO VI certification from the EU for the OT13 heavy-duty 13-liter natural gas engine.
Page 6
Distribution Methods of the Products or Services
Omnitek has distributors worldwide to market and distribute its products. The Company is continuously seeking additional global distribution partners to expand its distribution network. In certain markets, the Company competes against other companies with greater resources, more established distribution channels and other competitive advantages, and the success of these competitors may hinder our ability to generate revenues. Please see the section entitled “Competition” and also the relevant Risk Factors in ITEM 1A below.
Distribution Agreements. From time-to time, Omnitek may enter into exclusive or non-exclusive distribution agreements with its dealers, distributors or authorized diesel-to-natural gas engine conversion kit installation centers (“AIC”).
Internet. Information on products and services we offer, as well as information regarding new product introductions and company news, is available online at our website, www.omnitekcorp.com.
Company information and status of any publicly announced projects, new product developments, or services
Additional corporate information and disclosures regarding Omnitek Engineering Corp. can be found on the SEC website at http://www.sec.gov, which should be read in conjunction with this Annual Report. Additional information relating to the status of any publicly announced projects, new product developments, or services are available on our website at http://www.omnitekcorp.com/news.htm.
Competitive business conditions and the Company’s competitive position in the industry and methods of competition
We believe our products have many important advantages, some of which are performance, ease of use, and competitive cost. We compete in a small segment of the transportation and energy arena. Most of the larger multinational corporations do not offer a complete solution for the markets the Company serves. We believe that competition in these markets is principally based on the quality of the product, performance, reliability, and price. Because of the Company’s limited financial resources, Omnitek could be at a competitive disadvantage compared with other suppliers offering competing products.
Competition - Diesel-to-Natural Gas Engine Conversions
The Company encounters competing products in countries with no enforced emission standards, and where low-tech systems are still being used. These systems can be used to convert low-power diesel engines found in these countries. However, converting emissions controlled high-power engines, as currently found in most countries, requires a sophisticated engine management system, like the one Omnitek offers.
Currently, the Company is not aware of any direct competitors offering a similar and extensive range of engine conversion kits for heavy-duty diesel engines -- though some companies may supply parts to original equipment engine manufacturers, but they do not offer complete systems to convert diesel engines.
There are numerous companies supplying natural gas components for use on gasoline cars and small trucks. These technologies have been on the market for many years and millions of vehicles have been converted worldwide using these technologies. However, these technologies are not suitable to convert heavy-duty diesel engines and not in direct competition with Omnitek’s technology. At this time, Omnitek is not planning to compete in the small-engine market.
Competition - Dual Fuel Technology
Dual-fuel technology, where both diesel and natural gas fuels are used at the same time, offers minimal cost-savings potential and is not considered a competing technology.
Page 7
Competition - New Natural Gas Engines
Under certain conditions, it is not cost effective, or technologically feasible, to convert certain old diesel engines to operate on natural gas. Emission standards sometimes dictate the use of highly sophisticated technology that cannot be easily retrofitted onto an older engine. For these situations, Omnitek offers purpose-built new engines which can be used in buses, trucks, generators and other mobile and stationary applications.
Sources and availability of Raw Materials and Principal Suppliers
Omnitek does not utilize any specialized raw materials. We rely on non-affiliated suppliers for various standard and customized components and on manufacturers of assemblies that are incorporated into our products. We do not have long-term supply or manufacturing agreements with suppliers of raw materials, components, and assemblies. In certain instances, alternative sources may be limited. If these suppliers or manufacturers experience financial, operational, manufacturing capacity, or quality assurance difficulties, or cease production and sale of such products, or if there is any other disruption in our relationships with these suppliers or manufacturers, we will be required to locate alternative sources of supply. Our inability to obtain sufficient quantities of these components, if and as required in the future, may subject us to:
·delays in delivery or shortages in components that could interrupt and delay manufacturing and result in cancellations of orders for our products;
·increased component prices and supply delays as we establish alternative suppliers; inability to develop alternative sources for product components;
·required modifications of our products, which may cause delays in product shipments, increased manufacturing costs, and increased product prices; and,
·increased inventory costs as we hold more inventory than we otherwise might in order to avoid problems from shortages or discontinuance, which may result in write-offs if we are unable to use all such products in the future.
During the year ended December 31, 2024, two suppliers accounted for 83% of products purchased compared with the year ended December 31, 2023, where four suppliers accounted for 78% of products purchased.
Dependence on one or few major customers
The Company believes that the diversity of the product line offered alleviates the dependence on any customer. Through widespread use of our product line, Omnitek is striving to develop a wide base of customers. During the year ended December 31, 2024 four customers accounted for approximately 72% of sales. During the year ended December 31, 2023, eight customers accounted for approximately 91% of sales.
Patents, trademarks, licenses, franchises, concessions, royalty agreements or labor contracts, including duration
Omnitek owns the following Patents and Trademarks:
US Patents:
REG NO. | Title | Filing Date | Jurisdiction |
6374816 | Apparatus and Method for Combustion Initiation | 4/23/2001 | United States |
7426920 | Fuel Mixer Apparatus and Method | 06/06/2007 | United States |
Trademarks:
Mark | Reg No. | Class | Reg. Date | Owner | Jurisdiction |
Omnitek | 4525678 | 12 | 5/6/2014 | Omnitek | United States |
Omnitek | 4525690 | 7 | 5/6/2015 | Omnitek | United States |
The protection of proprietary rights relating to Omnitek’s products and expertise is critical for the business. Omnitek intends to file additional patent applications to protect certain technology and improvements considered important to the development of the Company’s business. The Company also intends to rely upon trade secrets, know-how, continuing technological innovation and licensing opportunities to develop and maintain its competitive position.
Page 8
Although the Company intends to seek patent protection for its proprietary technology and products in the United States and in foreign countries, the patent positions of our products are generally uncertain and involve complex legal and factual questions. Consequently, we do not know whether any of the patent applications that we have and will consider filing will result in the issuance of any patents, or whether such patent applications will be circumvented or invalidated. There can be no assurance that all United States patents that may pose a risk of infringement can or will be identified. Additionally, Omnitek has not sought to identify foreign patent applications that might affect existing patent applications currently on file with the Unites States Patent and Trademark Office. If we are unable to obtain licenses where we may have infringed on other patents, we could encounter delays in product market introductions while attempting to design around such intellectual property rights, or we could find that the development, manufacture or sale of products requiring such licenses could be prevented. In addition, we could incur substantial costs in defending suits brought against us on such intellectual property rights or prosecuting suits which the Company brings against other parties to protect its intellectual property rights. Competitors or potential competitors may have filed applications for or have received patents and may obtain additional patents and proprietary rights relating to compounds or processes competitive with those of Omnitek. See “Competitive business conditions and the Company’s competitive position in the industry and methods of competition.”
The Company relies on certain patented and unpatented trade secrets for a significant part of its intellectual property rights, and there can be no assurance that others will not independently develop substantially equivalent proprietary information and techniques, or otherwise gain access to our trade secrets or disclose such technology, or that Omnitek can meaningfully protect its rights to its unpatented trade secrets. We intend to require each of our employees, consultants and advisors to execute confidentiality agreements either upon the commencement of an employment or consulting relationship with Omnitek or at a later time. There can be no assurance, however, that these agreements will provide meaningful protection for Omnitek’s trade secrets in the event of unauthorized use or disclosure of such information.
We do not believe that any of our products or other proprietary rights infringe upon the rights of third parties. However, there can be no assurance that others may not assert infringement claims against Omnitek in the future and we recognize that any such assertion may require us to incur legal and other defense costs, enter into compromise royalty arrangements, or terminate the use of some technologies. Further, we may be required to incur legal and other costs to protect our proprietary rights against infringement by third parties.
Licenses and Royalty Agreements
Currently, we have no license or royalty agreements which would result in royalty payments.
Other Agreements
As part of the build-out of the dealer/installer network, the Company will from time-to-time enter into agreements with various companies in the USA and around the world.
Need of governmental approvals of principal products or services
Engine conversions in the United States are subject to regulations imposed by the U.S. Environmental Protection Agency (“EPA”), and in California, the California Air Resources Board (“CARB”).
Engine conversions in Europe, and certain other regions, are subject to regulations imposed by the European Union (“EU”), or local authorities.
Effect of existing or probable governmental regulations on the business
Omnitek is subject to the requirements of Regulation 13A under the Exchange Act, which require us to file with the Securities and Exchange Commission (the “Commission”), annual reports on Form 10-K, quarterly reports on Form 10-Q, and current reports on Form 8-K, and all other obligations of the Exchange Act applicable to issuers with stock registered pursuant to Section 12(g). We are also subject to Regulation 14A of the Securities Exchange Act of 1934, as amended (the “1934 Act”), which regulates proxy solicitations.
Page 9
Management believes that these reporting obligations increase the Company’s annual legal and accounting costs by an estimated $55,000.
Omnitek is not aware of any other governmental regulations now in existence or that may arise in the future that would have an effect on the Company’s business.
Research and Development
Research and development expenditures for 2024 and 2023, were $70,323 and $67,576 respectively, and were comprised of labor costs and charges for the purchase of equipment and parts for R&D.
In some cases, Omnitek is contracted to develop a specific engine or component. In these cases, Omnitek requires an up-front payment from the customer.
Costs and effects of compliance with environmental laws
Except as discussed above regarding EPA, CARB and EU emissions certification, our business activities are not subject to any environmental laws, and we do not anticipate that our future business activities will subject the Company to any environmental compliance regulations.
Number of total employees and number of full-time employees
As of the date of this report, the Company had a total of six full-time employees. We believe we have a good working relationship with our employees, who are not represented by a collective bargaining organization, and there are no organized labor agreements or union agreements between Omnitek and any employees.
On occasion we outsource certain services and intend to continue to utilize the services of independent consultants and contractors when needed. We believe that this use of third-party service providers will enhance our ability to contain general and administrative expenses.
Reports to Security Holders
The public may read and copy any materials the Company files with the SEC at the SEC’s public reference room at 100 F Street, NE, Washington D.C. 20549, on official business days during the hours of 10:00 a.m. to 3:00 p.m. Eastern time. Information may be obtained on the operation of the public reference room by calling the SEC at 1-800-SEC-0330. The SEC maintains an Internet site that contains reports, proxy and information statements, and other information regarding issuers that file electronically with the SEC at http://www.sec.gov. Moreover, the Company maintains a website at http://www.omnitekcorp.com that contains additional information about Omnitek. This information is publicly available and is updated regularly.
ITEM 1A.RISK FACTORS
Investment in our common stock involves significant risk. You should carefully consider the information described in the following risk factors, together with the other information appearing elsewhere in this report, before making an investment decision regarding our common stock. If any of the events or circumstances described in these risks actually occur, our business, financial conditions, results of operations, and future growth prospects would likely be materially and adversely affected. In these circumstances, the market price of our common stock could decline, and you may lose all or a part of your investment in our common stock.
Risks Related to Ukrainian Crises
Russia’s recent military intervention in Ukraine and the international community’s response have created substantial political and economic disruption, uncertainty, and risk.
Russia’s military intervention in Ukraine in late February 2022, Ukraine’s widespread resistance, and the NATO led and United States coordinated economic, financial, communications, and other sanctions imposed by other countries have created significant political and economic world uncertainty. There is significant risk of expanded military confrontation between Russia and other countries, possibly including the United States. Current and likely additional
Page 10
international sanctions against Russia may contribute to higher costs, particularly for petroleum-based products. These and related actions, responses, and consequences that cannot now be predicted or controlled may contribute to world-wide economic reversals. In these circumstances, receipt of supplies and products may be interrupted or may be delayed or otherwise negatively impact our operations.
Risks Related to Middle East Crises
The Israel-Gaza war has created substantial uncertainty and risk.
In early October, Hamas launched assaults against Israeli citizens. Israel has responded aggressively with operations inside Gaza against Hamas. The foregoing events have cause substantial regional instability and world-wide political and economic uncertainty. There is significant risk of expanded military confrontation in the region and beyond, possibly including the United States. These and related actions, responses, and consequences cannot be predicted or controlled and may contribute to world-wide economic reversals. In these circumstances, receipt of supplies and products may be interrupted or may be delayed or otherwise negatively impact our operations.
Risks Related to our Business
An overall economic downturn could negatively impact our earnings.
Any weakening of economic activity in our markets could result in a loss of customers, which could adversely affect our revenues or restrict our future growth. It may become more difficult for customers to pay their bills, leading to slow collections and higher-than-normal levels of accounts receivable. This could increase our financing requirements and bad debt expense. The foregoing could negatively affect earnings and liquidity, reducing our ability to grow the business.
The price of oil, which also affects the price of diesel and gasoline, can have a significant impact on the Company’s business. As the price differential between diesel and natural gas decreases the payback period for the cost of the engine conversion is extended. This makes engine conversions less desirable, which can result in lower sales of the Company’s engine conversion technology.
Unforeseeable circumstances could delay or disrupt our operations and negatively impact our operating results and financial condition.
Fire, riot, strikes, labor disputes, freight embargoes or transportation delays, acts of God or of the public enemy, war, acts or threats of terrorism, or civil disturbances, extreme weather conditions or natural disasters such as floods, earthquakes, hurricanes and tsunamis, and their related consequences and effects, including energy shortages and public health issues, any existing or future laws, rules, regulations or acts of any government (including any orders, rules or regulations issued by any official or agency or such government), or any cause beyond the Company’s reasonable control (each a “Force Majeure Event”), affecting our business, could delay or disrupt our operations, and the operations of our vendors, other suppliers and their operations or result in economic instability that may negatively impact our operating results and financial condition.
Increases in the wholesale price of natural gas could reduce our earnings.
A supply and demand imbalance in natural gas markets could cause an increase in the price of natural gas. A significant increase in the price of natural gas may discourage the conversion from diesel to natural gas.
Climate change, carbon neutral or energy efficiency legislation or regulations could restrict our market opportunities, negatively affecting our growth, cash flows and earnings.
The federal and/or state governments may enact legislation or regulations that attempt to control or limit the causes of climate change, including greenhouse gas emissions such as carbon dioxide and emissions of methane. Such laws or regulations could impose additional costs or operational requirements. They could also provide a cost advantage to alternative energy sources. The focus on climate change could negatively impact the reputation of fossil fuel products or services. The occurrence of these events could put upward pressure on the cost of natural gas relative to other energy sources, reduce the demand for natural gas, negatively affecting our growth opportunities, cash flows and earnings.
Page 11
The 200-nation “Paris Agreement on Climate Change” signed into law in 2016 signals a strong call to action with more than 175 countries committing to large emission reductions over the next 15 years. This may help to accelerate demand for Omnitek’s technology as countries around the world begin to enact air pollution control measures, in some cases banning diesel trucks and buses in large cities.
We are subject to physical and financial risks associated with climate change.
Climate change can create physical and financial risk. Climate change may impact a region’s economic health, which could impact our revenues. Our financial performance is tied to the health of the regional economies we serve. The price of energy has an impact on the economic health of our communities. The cost of additional regulatory requirements, such as regulation of CO2 emissions under section 111(d) of the CAA, or additional environmental regulation could impact the prices charged by natural gas suppliers.
A downturn in the trucking industry could materially adversely impact our results of operations.
If the trucking industry or any truck OEM customers worldwide suffer a significant downturn such circumstance could lead to significant reductions in our revenues and earnings and could have a material adverse impact on our results of operations.
Unpredictability in the adoption, implementation and enforcement of increasingly stringent emission standards by multiple jurisdictions around the world could adversely affect our business.
Our components and engines may be subject to extensive statutory and regulatory requirements governing emission and noise, including standards imposed by the EPA, the European Union, state regulatory agencies, such as CARB, and other regulatory agencies around the world. We have made, and may be required to continue to make, significant capital and research expenditures to comply with these regulations. Developing engines and components to meet numerous changing government regulatory requirements, with different implementation timelines and requirements, makes developing components and engines efficiently for multiple markets complicated and could result in substantial additional costs that may be difficult to recover in certain markets. In some cases, we may be required to develop new products to comply with new regulations, particularly those relating to air emissions. While we have met previous deadlines, our ability to comply with other existing and future regulatory standards will be essential for us to maintain our position in the markets we serve. The successful development and introduction of new and enhanced products in order to comply with new regulatory requirements are subject to other risks, such as delays in product development, cost over-runs and unanticipated technical and manufacturing difficulties.
In addition to these risks, the nature and timing of government implementation and enforcement of increasingly stringent emission standards in emerging markets are unpredictable and subject to change. Any delays in implementation or enforcement could result in the products we developed or modified to comply with these standards becoming unnecessary or becoming necessary later than expected thereby, in some cases, negatively affecting our competitive advantage. This in turn can delay, diminish or eliminate the expected return on capital and research expenditures that we have invested in such products and may adversely affect our perceived competitive advantage in being an early, advanced developer of compliant engines.
We are exposed to risks arising from the price and availability of energy.
The level of demand for our products and services is influenced in multiple ways by the price and availability of energy. High diesel costs generally drive greater demand for natural gas and LPG engines in the countries in which we operate. If diesel costs decrease or increase less than expected, demand for our products may likewise decrease. The relative unavailability of electricity in some emerging market countries also influences demand for our products for electric generators. If these countries add energy capacity by expanding their power grids at a rate equal to or faster than the growth in demand for energy, the demand for our genset products could also decrease or increase less than would otherwise be the case.
Page 12
The market for alternative fuel engines may not continue to develop according to our expectations and, as a result, our business may not grow as planned and our business plan may be adversely affected.
Our future growth is dependent upon the market for efficient alternative fuel engines and engine conversion kits expanding as a result of our customers and potential customers substituting diesel engines with alternative fuel engines. Part of our business plan is dependent on our market forecasts with respect to this expected substitution trend. However, there can be no assurance that we can accurately predict this trend. Furthermore, there can be no assurance that our products would capture any portion of the potential market increase. If the markets which represent a significant portion of our business or in which we anticipate significant growth opportunities for our products fail to develop or develops more slowly than we anticipate, the growth of our business and our business plan could be materially adversely affected.
Introduction of electric vehicles may also reduce the size of our market.
We may have difficulty managing the expansion of our operations.
In order to effectively manage our operations and growth, including growth in the sales of, and services related to, our power systems, we may need to:
·scale our internal infrastructure, including establishing additional facilities, while continuing to provide technologically sophisticated power systems on a timely basis;
·attract and retain sufficient numbers of talented personnel, including application engineers, customer support staff and production personnel;
·continue to enhance our compliance and quality assurance systems; and
·continue to improve our operational, financial and management controls and reporting systems and procedures.
Rapid expansion of our operations could place a strain on our senior management team, support teams, manufacturing lines, information technology platforms and other resources. In addition, we may be required to place more reliance on our strategic partners and suppliers, some of whom may not be capable of meeting our production demands in terms of timing, quantity, quality or cost. Difficulties in effectively managing the budgeting, forecasting and other process control issues presented by any rapid expansion could harm our business, prospects, results of operations or financial condition.
New products, including new engines we develop, may not achieve widespread adoption.
Our growth may depend on our ability to develop and/or acquire new products, and/or refine our existing products and technology. We will seek to develop or acquire new products, or enhance our existing products and power system technology, if we believe they will provide significant additional revenues and favorable profit margins. However, we cannot know beforehand whether any new or enhanced products will successfully penetrate our target markets. There can be no assurance that newly developed or acquired products will perform as well as we expect, or that such products will gain widespread adoption among our customers.
Additionally, there are greater design and operational risks associated with new products. The inability of our suppliers to produce technologically sophisticated components for our new engines and power systems, the discovery of any product or process defects or failures associated with production of any new products and any related product returns could each have a material adverse effect on our business, financial condition and results of operations. If new products for which we expend significant resources to develop or acquire are not successful, our business could be adversely affected.
We maintain a significant investment in inventory, and a decline in our customers’ purchases could lead to a decline in our sales and profitability and cause us to accumulate excess inventory.
We cannot always predict the timing, frequency, or size of the future orders of our customers. Our ability to accurately forecast our sales is further complicated by the continuing global economic uncertainty. We maintain
Page 13
significant inventories in an effort to ensure that our customers have a reliable source of supply. If we fail to anticipate the changing needs of our customers and accurately forecast our customer demands, our customers may not continue to place orders with us, and we may accumulate significant inventories of products that we will be unable to sell or return to our suppliers. This may result in a significant decline in the value of our inventory and a decrease in our future gross profit.
Our financial position, results of operations and cash flows have been, and may in the future be, negatively impacted by challenging global economic conditions.
Challenging global economic conditions have had, and may in the future have, a material adverse effect on our business. Difficult market conditions can also cause us to experience pricing pressure, negatively impacting our margins. Economic downturns may materially impact our customers, as well as suppliers and other parties with which we do business. Economic conditions that adversely affect our customers may cause them to terminate existing supply agreements or to reduce the volume of products they purchase from us in the future. We may have significant receivables collections from customers that face liquidity issues. Failure to collect a significant portion of amounts due on those receivables could have a material adverse effect on our results of operations and financial condition. Similarly, with adverse market conditions, our key suppliers from which we source components may be unable to provide components to us or extend us credit. Furthermore, we may not be able to successfully anticipate, plan for and respond to changing economic conditions, and our business could be negatively affected.
We could suffer warranty claims or be subject to product liability claims, both of which could materially and adversely affect our business.
From time to time, we may incur liabilities for warranty claims as a result of defective products or components, including claims arising from defective products or components provided by our suppliers that are integrated into our conversion kits. The provisions we make for warranty accrual may not be sufficient or we may be unable to rely on a warranty provided by a third-party manufacturer, and we may recognize additional expenses as a result of warranty claims in excess of our current expectations. Such warranty claims may necessitate a redesign, re-specification, a change in manufacturing processes, and/or recall of our product, which could have an adverse impact on our finances and on existing or future sales of our products. Even in the absence of any warranty claims, a product deficiency such as a manufacturing defect or a safety issue may necessitate a product recall, which could have an adverse impact on our finances and on existing or future sales.
Our business exposes us to potential product liability claims that are inherent to our industry. Any accidents involving our products could materially impede widespread market acceptance and demand for our products. In addition, we may be subject to a claim by end-users of our products or others alleging that they have suffered property damage, personal injury or death because our products did not perform adequately. Such a claim could be made whether or not our products perform adequately under the circumstances. From time to time, we may be subject to product liability claims in the ordinary course of business, and we carry a limited amount of product liability insurance for this purpose. However, our current insurance policies may not provide sufficient or any coverage for such claims, and we cannot predict whether we will be able to maintain our insurance coverage on commercially acceptable terms.
If we do not properly manage the sales of our products into foreign markets, our business could suffer.
We have sales and distribution activities in counties where we may lack sufficient expertise, knowledge of local customs or contacts. There can be no assurance that we will be able to maintain our current relationship with these foreign customers, or that we will be able to develop effective, similar relationships in foreign markets into which we supply our products in the future.
Growing the market for our products in markets outside of the United States may take longer and cost more to develop than we anticipate and is subject to inherent risks, including unexpected changes in government policies, trade barriers restricting our ability to sell our products in those countries, longer payment cycles, exposure to currency fluctuations, and foreign exchange controls that restrict or prohibit repatriation of funds. As a result, if we do not properly manage foreign sales, our business could suffer.
In addition, our foreign sales subject us to numerous stringent U.S. and foreign laws, including the Foreign Corrupt Practices Act (“FCPA”), and comparable foreign laws and regulations which prohibit improper payments or offers
Page 14
of payments to foreign governments and their officials and political parties by U.S. and other business entities for the purpose of obtaining or retaining business. Safeguards that we may implement to discourage these practices could prove to be ineffective, and violations of the FCPA and other laws may result in severe criminal or civil sanctions, or other liabilities or proceedings against us, including class action lawsuits and enforcement actions from the SEC, The Department of Justice and overseas regulators. Any of these factors, or any other international factors, could impair our ability to effectively sell our power systems, or other products or services that we may develop, outside of the U.S.
The price of our stock may be volatile and may decline in value.
The trading price of our common stock may be highly volatile and could be subject to wide fluctuations in response to various factors, some of which are beyond our control. The stock market in general has experienced extreme price and volume fluctuations that have often been unrelated or disproportionate to the operating performance of companies with securities traded in those markets. Broad market and industry factors may seriously affect the market price of companies’ stock, including ours, regardless of actual operating performance. In addition, in the past, following periods of volatility in the overall market and the market price of a particular company’s securities, securities class action litigation has often been instituted against these companies. This litigation, if instituted against us, could result in substantial costs and a diversion of our management’s attention and resources.
Business, political and economic factors may affect our operations
If the World economic conditions deteriorate or do not improve, our target consumer base may be disproportionately affected. Stagnant economic growth is likely to negatively affect our customers' ability to purchase our goods. The resulting impact of such economic conditions on our customers and on consumer spending could have a material adverse effect on demand for our products, financial condition, and operating results.
Our performance is influenced by a variety of economic, social, and political factors
Our performance is influenced by a variety of economic, social, and political factors. Economic uncertainty, unfavorable employment levels, declines in consumer confidence, increases in consumer debt levels, increased commodity prices, and other economic factors may affect our customer spending decisions and adversely affect the demand for our products. Economic conditions also affect governmental political and budgetary policies. As a result, economic conditions can have an effect on the sale of our products to our customers.
A global economic crisis could result in decreases in customer spending
We operate in competitive and evolving markets locally, nationally and globally. These markets are subject to rapid technological change and changes in demand. In seeking market acceptance, we will encounter competition from many sources, including other well-established larger technology providers. Many of these competitors have substantially greater financial, marketing and other resources. Our revenue could be materially adversely affected if we are unable to compete successfully with these other providers.
Uncertainty relating to the ability to enforce rights under certain dealer agreements
Many of the dealer agreements are with foreign entities and are governed by the laws of foreign jurisdictions. If a dealer breaches a dealer agreement, we may incur the additional costs of determining our rights and obligations under the agreement, under applicable foreign laws, and enforcing the agreement in a foreign jurisdiction. We may not be able to enforce such rights or may determine that it would be too costly to enforce such rights. In addition, some of the dealer agreements contain arbitration provisions that govern disputes under the agreements and there is uncertainty with respect to the enforceability of such arbitration provisions under the laws of related foreign jurisdictions. If a dispute were to arise under a dealer agreement and the related arbitration provision was not effective, we would be exposed to the additional costs of settling the dispute through traditional legal avenues rather than through an arbitration process.
The Company is subject to foreign business, political and economic disruption risks
Omnitek is engaged with various entities from around the world. As a result, we are exposed to foreign business, political and economic risks, which could adversely affect our financial position and results of operations, including:
Page 15
·difficulties in managing dealer relationships from outside of a dealer’s jurisdiction;
·political and economic instability;
·less developed infrastructures in newly industrializing countries;
·susceptibility to business interruption in foreign areas due to war, terrorist attacks, medical epidemics, changes in political regimes, and general interest rate and currency instability;
·exposure to possible litigation or claims in foreign jurisdictions; and,
·competition from foreign-based providers and the existence of protectionist laws and business practices that favor such providers.
The Company may be subject to intellectual property rights claims
Companies in our industry often own large numbers of patents, copyrights, trademarks and trade secrets and frequently enter into litigation based on allegations of infringement or other violations of intellectual property rights. As competition in the industry increases, the possibility of intellectual property rights claims against Omnitek may grow. Omnitek’s technologies may not be able to withstand third-party claims or rights against their use. Intellectual property claims, whether having merit or otherwise, could be time consuming and expensive to litigate or settle and could divert management resources and attention. In addition, many of Omnitek’s agreements require that Omnitek indemnify for third-party intellectual property infringement claims, which could increase Omnitek’s costs as a result of defending such claims and may require that Omnitek pay the damages if there were an adverse ruling in any such claims. If litigation is successfully brought by a third party against Omnitek in respect of intellectual property, Omnitek may be required to cease distributing or marketing certain products or obtain licenses from the holders of the intellectual property at material cost, redesign affected products in such a way as to avoid infringing intellectual property rights, any or all of which could materially adversely affect our business, financial condition and results of operations. If those intellectual property rights are held by a competitor, Omnitek may be unable to obtain the intellectual property at any price, which could also adversely affect our competitive position. An adverse determination could also prevent Omnitek from offering its products. Any of these results could harm our business, financial condition, and results of operations.
Operational stage of the Company and its products
Omnitek has generated limited revenue from operations and may not generate any significant or sufficient revenue from its current operations to continue future operations. To achieve profitable operations, Omnitek, alone or with others, must successfully initiate and maintain sales and distribution of our products. The time frame necessary to achieve market success for any individual product is uncertain. There can be no assurance that Omnitek’s efforts will be successful, that any of our products will prove to meet the anticipated levels of approval or effectiveness, or that we will be able to obtain and retain customers. Omnitek’s results can also be affected by the ability of competition to introduce new products that have advantageous technology or the competition's ability to adjust its pricing to reduce our competitive advantage. Results will also be affected by strategic decisions made by the management regarding product volume, mix, and timing of orders received during operations.
Uncertainty of future sales
There can be no assurance that our products will meet the effectiveness required to be competitive in the marketplace and that our products achieve customer acceptance.
Future capital requirements; uncertainty of future funding
Substantial expenditures will be required to enable Omnitek to conduct product research, manufacturing, marketing and distribution of its products. Omnitek may need to raise additional capital to facilitate growth and support its long-term business plan. Omnitek has no established bank-financing arrangements and it is not anticipated that we will secure any bank financing in the near future. Therefore, it is likely that Omnitek may need to seek additional financing through subsequent future public or private sales of its securities, including equity securities. Omnitek may also seek funding for the manufacturing and marketing of its products through strategic partnerships and other arrangements with corporate partners. There can be no assurance, however, that such collaborative arrangements or additional funds will be available when needed, or on terms acceptable. Any such additional financing may result in significant dilution to existing stockholders. If adequate funds are not available, we may be required to curtail one or
Page 16
more of our programs. Omnitek’s future cash requirements will be affected by the revenue generated from the sale of its products, the costs of production and marketing, as well as relationships with corporate partners, changes in the focus and direction of Omnitek’s programs, competitive and technological advances, and other factors.
Dependence on others; manufacturing capabilities and limited distribution capabilities
An important element of Omnitek’s strategy for the marketing and release of its products is to enter into various arrangements with distribution and retail partners. The success and commercialization of Omnitek’s products will be dependent, in part, upon Omnitek’s ability to enter into such arrangements and upon the ability of these third parties to perform their responsibilities. Although we believe that parties to any such arrangements would have an economic motivation to succeed in performing their contractual responsibilities, the amount and timing of resources to be devoted to these activities may not be within our control. There can be no assurance that any such arrangements will be available on terms acceptable to Omnitek, if any at all, and that such parties will perform their obligations as expected, or that any revenue will be derived from such arrangements. If Omnitek is not able to enter into such arrangements, it could encounter delays in introducing its products into the market.
Omnitek assembles certain products in-house after receiving components from outside vendors. Other products such as engines or components for future products may be produced or manufactured by outside companies for Omnitek. Therefore, Omnitek may be dependent on contract manufacturers for the production and manufacturing of certain products or components for products. In the event that we are unable to obtain or retain the necessary manufacturers for components or products on acceptable terms, we may not be able to continue to commercialize and market our products as planned. The manufacture of Omnitek’s products will be subject to current good manufacturing practices (“GMP”) requirements prescribed by Omnitek in order to meet the specifications and other standards prescribed by Omnitek to satisfy the anticipated and appropriate levels of operations and effectiveness when in use. There can be no assurance that we will be able to (i) obtain adequate supplies of products in a timely fashion at acceptable quality and prices, (ii) enter into arrangements for the manufacture of products with manufacturers whose facilities and procedures comply with Omnitek’s GMP or other regulatory requirements, should any such regulatory requirements arise, (iii) or that manufacturers will continue to comply with such standards, or (iv) that such manufacturers will be able to adequately meet Omnitek product needs. Omnitek’s dependence upon others for the manufacture of its proposed products may adversely affect our ability to develop and deliver products on a timely and competitive basis.
In addition, Omnitek does not now have, nor does it have current plans to acquire or obtain, the facilities, or personnel necessary to conduct its own full-scale distribution of its products. Consequently, Omnitek will have to rely on existing commercial distribution channels for the sale of its products. There can be no assurance that Omnitek will be able to secure sufficient distribution of any of its products on acceptable terms.
Concentration of Risks
Customers - Approximately eight customers accounted for 91% of revenue for the year ended December 31, 2024, and loss of any of these customers could adversely affect our results of operations, financial condition, and profitability.
These customers are free to purchase from other suppliers who may have more established distribution channels and other competitive advantages, such as price. In addition, our customers’ need for our products depends on many factors including worldwide and regional fuel prices, and various governmental regulations. If any of the latter factors change significantly, our customers’ demand for our products might decline substantially.
The loss of any of these customers could have a materially adverse effect on our results of operations and financial condition. At the minimum, it would have a materially adverse effect on our operations during the short term until we are able to generate replacement customers.
Suppliers - Approximately four suppliers accounted for 78% of products purchased for the year ended December 31, 2024. Dependence on a limited number of qualified suppliers of components and equipment could lead to delays, lost revenue or increased costs.
Our future operating results may depend substantially on our suppliers’ ability to supply us with components in sufficient volumes to meet our production requirements. Certain components that we use are available from only a
Page 17
single or limited number of qualified suppliers. If there is a significant simultaneous upswing in demand for such a component from several high-volume industries resulting in a supply reduction, if a component is otherwise in short supply, or if a supplier has a quality issue with a component, we may experience delays or increased costs in obtaining that component. If we are unable to obtain sufficient quantities used in the components, or other necessary components, we may experience production delays which could cause us loss of revenue. If a component becomes unavailable, we could suffer significant loss of revenue. Each of the following could also significantly harm our operating results:
·an unwillingness of a supplier to supply such components to us;
·consolidation of key suppliers;
·failure of a key supplier to provide enough components;
·a key supplier’s, or sub-supplier’s, inability to access credit necessary to operate its business; or
·failure of a key supplier to remain in business.
Risk of technological obsolescence and competition
Omnitek operates in an ever-evolving field. Developments are expected to continue at a rapid pace in the industry in general. Competition from other large companies, research and academic institutions and others is intense and expected to increase. Many of these companies and institutions have substantially greater resources than Omnitek and may have substantially greater experience in manufacturing and marketing of products. These entities represent significant long-term competition for Omnitek. There can be no assurance that developments by others will not render our technologies and products obsolete or noncompetitive. In addition, Omnitek’s competitors might succeed in developing or purchasing technologies and products that render the Company's technology and products obsolete or noncompetitive. See “Business – Competition.”
Changes of prices for products
While the prices of our products are projected to be in line with those from market competitors, there can be no assurance that they will not decrease in the future. Competition may cause us to lower prices in the future. Moreover, it is difficult to raise prices even if internal costs increase.
Creditworthiness of distributors is an ongoing concern
Omnitek may not always be able to collect all of the funds owed to it by its distributors. Some distributors may experience financial difficulties which may adversely impact our collection of accounts receivable. We regularly review the collectability and creditworthiness of our distributors to determine an appropriate allowance for credit to such distributors. If our uncollectible accounts exceed the amount for which we have planned, this would adversely impact our operating results. Omnitek tries to minimize this concern by selling most of its products by way of prepaid purchase orders.
Trading and limited market
At the present time, Omnitek common stock is traded on the OTCQB under the symbol OMTK. There is currently a limited public market for the Common Stock and there can be no assurance that an active trading market will develop or, if one does develop, that it will be maintained. However, should such a market arise, the possibility or actual sale into the market of shares, as permitted under Rule 144 of the Securities Act of 1933, may adversely affect prevailing market prices, if any, for Omnitek’s Common Stock and could impair our ability to raise capital through the sale of its equity securities. In order to qualify for unrestricted resale of Common Stock under Rule 144, certain holding periods must be met and a legal opinion setting forth the exemption from registration must be provided. Further, there is no assurance that Rule 144 will be applicable to Omnitek and investors may not be able to rely on its provisions now or in the future. In addition, sales of significant amounts of Common Stock by Omnitek could have an adverse effect on the market price.
Page 18
No dividends
No cash dividends have been paid. Payment of dividends on the Common Stock is within the discretion of the Board of Directors, is subject to state law, and will depend upon our earnings, if any, its capital requirements, financial condition and other relevant factors.
Possible volatility of stock price
The market price of our securities is likely to be highly volatile. Factors such as the market acceptance of Omnitek’s products, success of distribution channels or its competitors, announcements of technological innovations or new commercial products by us or our competitors, developments in trademark, patent or other proprietary rights of Omnitek or our competitors, and fluctuations in our operating results may have a significant effect on the market price of the Common Stock. In addition, the stock market has experienced and continues to experience extreme price and volume fluctuations which have affected the market price of many companies, and which have often been unrelated to the operating performance of these companies. These broad market fluctuations, as well as general economic and political conditions, may adversely affect the market price, if a market develops, of the Common Stock. See “Description of Capital Stock.”
We are subject to the periodic reporting requirements of the Securities Exchange Act of 1934, which require us to incur audit fees and legal fees in connection with the preparation of such reports. These additional costs could reduce our ability to earn a profit.
We are required to file periodic reports with the Securities and Exchange Commission pursuant to the Securities Exchange Act of 1934 and the rules and regulations promulgated thereunder. In order to comply with these requirements, our independent registered public accounting firm has to review our financial statements on a quarterly basis and audit our financial statements on an annual basis. Moreover, our legal counsel will have to review and assist in the preparation of such reports. The costs charged by these professionals for such services cannot be accurately predicted at this time because factors such as the number and type of transactions that we engage in and the complexity of our reports cannot be determined at this time and will have a major effect on the amount of time to be spent by our auditors and attorneys. However, the incurrence of such costs will obviously be an expense to our operations and thus have a negative effect on our ability to meet our overhead requirements and earn a profit. We may be exposed to potential risks resulting from requirements under Section 404 of the Sarbanes-Oxley Act of 2002. If we cannot provide reliable financial reports or prevent fraud, our business and operating results could be harmed, investors could lose confidence in our reported financial information, and the trading price of our common stock could drop significantly.
Pursuant to Section 404 of the Sarbanes-Oxley Act of 2002, as amended by SEC Release 33-8889 we are required to include in our annual report our assessment of the effectiveness of our internal control over financial reporting as of the end of the year. If we fail to achieve and maintain the adequacy of our internal controls, as such standards are modified, supplemented or amended from time to time, we may not be able to ensure that we can conclude on an ongoing basis that we have effective internal controls over financial reporting in accordance with Section 404 of the Sarbanes-Oxley Act. Moreover, effective internal controls, particularly those related to revenue recognition, are necessary for us to produce reliable financial reports and are important to help prevent financial fraud. If we cannot provide reliable financial reports or prevent fraud, our business and operating results could be harmed, investors could lose confidence in our reported financial information, and the trading price of our common stock could drop significantly.
Penny stock regulations
If Omnitek’s stock is below $5.00 per share, or we do not have $2,000,000 in net tangible assets, or are not listed on an exchange or on the NASDAQ National Market System, among other conditions, our shares may be subject to a rule promulgated by the Securities and Exchange Commission (the “SEC”) that imposes additional sales practice requirements on broker-dealers who sell such securities to persons other than established customers and institutional accredited investors. For transactions covered by the rule, the broker-dealer must make a special suitability determination for the purchaser and receive the purchaser's written consent to the transaction prior to the sale. Furthermore, if the price of Omnitek’s stock is below $5.00, and does not meet the conditions set forth above, sales of our stock in the secondary market will be subject to certain additional new rules promulgated by the SEC. These rules generally require, among other things, that brokers engaged in secondary trading of stock provide customers
Page 19
with written disclosure documents, monthly statements of the market value of penny stocks, disclosure of the bid and asked prices, and disclosure of the compensation to the broker-dealer and disclosure of the salesperson working for the broker-dealer. These rules and regulations may affect the ability of broker-dealers to sell Omnitek's securities, thereby limiting the liquidity of the securities. They may also affect the ability of shareholders to resell their securities in the secondary market.
Dependence upon key personnel
Our success in developing marketable products and achieving a competitive position will depend, in part, on its ability to retain qualified engineers, management and marketing personnel and in particular, to retain the services of Mr. Werner Funk, upon whom we are reliant on for the development of products for the Company.
In the event of the death, incapacity or departure of Mr. Funk from Omnitek, it is unlikely that we would be able to continue conducting our business plan in a timely manner. Even if we are able to find additional personnel to replace Mr. Funk, it is uncertain whether we could find someone who could develop our business along the lines described in this report.
Omnitek has an Employment Agreement in place with Mr. Funk that provides for continued service in his current capacities through May 3, 2027 and thereafter on a year-to-year basis. See “Narrative Disclosure to Summary Compensation Table” for details of Employment Agreements.
ITEM 1B. UNRESOLVED STAFF COMMENTS
We are not required to provide the information called for by this item.
ITEM 1C. RISKS RELATED TO CYBERSECURITY
Cybersecurity risks could adversely affect our business and disrupt our operations.
The threats to network and data security are increasingly diverse and sophisticated. Despite our efforts and processes to prevent breaches, our devices, as well as our servers, computer systems, and those of third parties that we use in our operations are vulnerable to cybersecurity risks, including cyber-attacks such as viruses and worms, phishing attacks, denial-of-service attacks, physical or electronic break-ins, employee theft or misuse, and similar disruptions from unauthorized tampering with our servers and computer systems or those of third parties that we use in our operations, which could lead to interruptions, delays, loss of critical data, unauthorized access to user data, and loss of consumer confidence. In addition, we may be the target of email scams that attempt to acquire personal information or company assets. Despite our efforts to create security barriers to such threats, we may not be able to entirely mitigate these risks. Any cyber-attack that attempts to obtain our or our users’ data and assets, disrupt our service, or otherwise access our systems, or those of third parties we use, if successful, could adversely affect our business, operating results, and financial condition, be expensive to remedy, and damage our reputation. In addition, any such breaches may result in negative publicity, adversely affect our brand, decrease demand for our products and services, and adversely affect our operating results and financial condition.
We are increasingly dependent on information technology and our systems and infrastructure face certain risks, including cybersecurity and data leakage risks.
Significant disruptions to our information technology systems or breaches of information security could adversely affect our business. We are increasingly dependent on sophisticated information technology systems and infrastructure to operate our business. Occasionally we also outsource elements of our operations to third parties, some of which are outside the U.S., including elements of our information technology infrastructure, and as a result we are managing many independent vendor relationships with third parties who may or could have access to our confidential information. The size and complexity of our information technology systems, and those of our third-party vendors with whom we contract, make such systems potentially vulnerable to service interruptions. In addition, we and our vendors could be susceptible to third party attacks on our information technology systems. Such attacks are increasingly sophisticated and are made by groups and individuals with a wide range of motives and expertise, including state and quasi-state actors, criminal groups, “hackers” and others. Any security breach or other disruption to our or our vendors’ information technology infrastructure could also interfere with or disrupt our business operations, including our manufacturing, distribution, R&D, sales and/or marketing activities.
Page 20
In the ordinary course of business, we and our vendors collect, store and transmit large amounts of confidential information (including trade secrets or other intellectual property, proprietary business information and personal information), and it is critical that we do so in a secure manner to maintain the confidentiality and integrity of such confidential information. The size and complexity of our and our vendors’ systems and the large amounts of confidential information that is present on them also makes them potentially vulnerable to security breaches from inadvertent or intentional actions by our employees, partners or vendors, or from attacks by malicious third parties. Maintaining the security, confidentiality and integrity of this confidential information (including trade secrets or other intellectual property, proprietary information, business information and personal information) is important to our competitive business position. However, such information can be difficult to protect. While we have taken steps to protect such information, and to ensure that the third-party vendors’ on which we rely have taken adequate steps to protect such information, there can be no assurance that our or our vendors’ efforts will prevent service interruptions or security breaches in our systems or the unauthorized or inadvertent wrongful use or disclosure of confidential information that could adversely affect our business operations or result in the loss, misappropriation, and/or unauthorized access, use or disclosure of, or the prevention of access to, confidential information. A breach of our or our vendors’ security measures or the accidental loss, inadvertent disclosure, unapproved dissemination, misappropriation or misuse of trade secrets, proprietary information, or other confidential information, whether as a result of theft, hacking, fraud, trickery or other forms of deception, or for any other cause, could enable others to produce competing products, use our proprietary technology or information, and/or adversely affect our business position. Further, any such interruption, security breach, or loss, misappropriation, and/or unauthorized access, use or disclosure of confidential information, including personal information regarding our patients and employees, could result in financial, legal, business, and reputational harm to us and could have a material adverse effect on our business, financial condition, results of operations, cash flows, and/or ordinary share price.
If we sustain cyber-attacks or other privacy or data security incidents that result in security breaches, we could suffer a loss of sales and increased costs, exposure to significant liability, reputational harm and other negative consequences.
Our information technology may be subject to cyber-attacks, security breaches or computer hacking. Hackers and data thieves are increasingly sophisticated and operate large-scale and complex automated attacks. Experienced computer programmers and hackers may be able to penetrate our security controls and misappropriate or compromise sensitive personal, proprietary or confidential information, create system disruptions or cause shutdowns. They also may be able to develop and deploy malicious software programs that attack our systems or otherwise exploit any security vulnerabilities. Our systems and the data stored on those systems may also be vulnerable to security incidents or security attacks, acts of vandalism or theft, coordinated attacks by activist entities, misplaced or lost data, human errors, or other similar events that could negatively affect our systems and the data stored on those systems, and the data of our business partners. Further, third parties, such as hosted solution providers, which provide services to the Company, could also be a source of security risk in the event of a failure of their own security systems and infrastructure.
The costs to eliminate or address the foregoing security threats and vulnerabilities before or after a cyber incident could be significant. Our remediation efforts may not be successful and could result in interruptions, delays or cessation of service, and the loss of existing or potential suppliers or customers. In addition, breaches of our security measures and the unauthorized dissemination of sensitive personal, proprietary or confidential information about the Company, our business partners or other third parties could expose us to significant potential liability and reputational harm. As threats related to cyber-attacks develop and grow, we may also find it necessary to make further investments to protect our data and infrastructure, which may impact the Company’s results of operations. In case of a cyber-attack, the Company may suffer losses that could have a material adverse effect on its business. As a global enterprise, we could also be negatively impacted by existing and proposed laws and regulations, and government policies and practices related to cybersecurity, data privacy, data localization and data protection. In addition, our customers may encourage, or require, compliance with certain security standards, such as the voluntary cybersecurity framework released by the National Institute of Standards and Technology (NIST), which consists of controls designed to identify and manage Cybersecurity risks, and we could be negatively impacted to the extent we are unable to comply with such standards.
Page 21
Our business is subject to cybersecurity risks.
Our operations are increasingly dependent on information technologies and services. Threats to information technology systems associated with cybersecurity risks and cyber incidents or attacks continue to grow, and include, among other things, storms and natural disasters, terrorist attacks, utility outages, theft, viruses, phishing, malware, design defects, human error, or complications encountered as existing systems are maintained, repaired, replaced, or upgraded. Risks associated with these threats include, among other things:
• Theft or misappropriation of funds;
• loss, corruption, or misappropriation of intellectual property, or other proprietary or confidential
information (including customer, supplier, or employee data);
• disruption or impairment of our and our customers’ business operations and safety procedures;
• damage to our reputation with our customers and the market;
• exposure to litigation;
• loss or damage to our worksite data delivery systems; and
• increased costs to prevent, respond to or mitigate cybersecurity events.
Although we utilize various procedures and controls to mitigate our exposure to such risk, cybersecurity attacks and other cyber events are evolving and unpredictable. Moreover, we have no control over the information technology systems of our customers, suppliers, and others with which our systems may connect and communicate. As a result, the occurrence of a cyber incident could go unnoticed for a period of time.
We do not presently maintain insurance coverage to protect against cybersecurity risks. If we procure such coverage in the future, we cannot ensure that it will be sufficient to cover any particular losses we may experience as a result of such cyber-attacks. Any cyber incident could have a material adverse effect on our business, financial condition and results of operations.
A cybersecurity incident could negatively impact our business and our relationships with customers and expose us to litigation risk.
We use computers in substantially all aspects of our business operations. We also use mobile devices, social networking and other online activities to connect with our employees and our customers. Such uses give rise to cybersecurity risks, including security breach, espionage, system disruption, theft and inadvertent release of information. Our business involves the storage and transmission of numerous classes of sensitive and/or confidential information and intellectual property, including customers’ personal information, private information about employees, and financial and strategic information about the Company and its business partners. We also rely on a Payment Card Industry compliant third party to protect our customers’ credit card information. While we have implemented measures to prevent security breaches and cyber incidents, our preventative measures and incident response efforts may not be entirely effective. The theft, destruction, loss, misappropriation, or release of sensitive and/or confidential information or intellectual property, or interference with our information technology systems or the technology systems of third parties on which we rely, could result in business disruption, negative publicity, brand damage, violation of privacy laws, loss of customers, potential litigation and liability and competitive disadvantage.
ITEM 2. PROPERTIES
The Company owns no real property. On June 3, 2021, the Company entered into a lease for the premises located at 1345 Specialty Drive #E, Vista, CA, containing approximately 11,751 square feet of rentable area. The lease commenced on July 1, 2021 and expires on June 30, 2026. The monthly base rent under the lease is $9,988 per month and monthly operating expenses during the term of the lease, subject to adjustment under the lease, is $1,175 per month. On Commencement Date, the Company recognized a right-of-use (“ROU”) asset of $653,701 and a lease liability of $652,350.
ITEM 3. LEGAL PROCEEDINGS
On September 16, 2022, the Company received a Summons and was named as a cross-defendant in the matter of Olson-Ecologic Engine Testing Laboratories, LLC -v- Michael Naylor, Omnitek Engineering Corp., and Moto Concerto, Inc., filed in the Superior Court of the State of California, County of Orange, Central Justice Center, Case
Page 22
No. 30-2020-01171344. Olson-Ecologic Engine Testing Laboratories, LLC filed the cross-complaint in response to the original complaint filed by Michael Naylor against Olson-Ecologic Engine Testing Laboratories. Omnitek served as a subcontractor to Olson-Ecologic who received a grant in May 2017 from the California Energy Commission. In October 2017, very early in the project and before completion of the project, which was to run into 2020, Olson-Ecologic advised Omnitek that the California Energy Commission had terminated the project. In the cross-complaint Olson-Ecologic alleges that Omnitek participated with Mr. Naylor in overcharging Olson-Ecologic, however, Olson-Ecologic does not provide a specific statement of facts or actions of what Omnitek allegedly did. Olson-Ecologic’s cross-complaint and allegations against Omnitek are without merit and Omnitek will vigorously defend the cross-complaint. As of the time of this report there are no material developments. The trial date is set for December 8, 2025.
We are not a party to any other pending legal proceeding. No federal, state or local governmental agency is presently contemplating any proceedings against the Company. No director, executive officer or affiliate of the Company or owner of record or beneficially of more than five percent of the Company's common stock is a party adverse to the Company or has a material interest adverse to the Company in any proceeding.
ITEM 4. MINE SAFETY DISCLOSURES
Not applicable.
PART II.
ITEM 5. MARKET FOR REGISTRANT’S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES
Market Information
Our common stock is traded on OTCQB under the symbol “OMTK.” The CUSIP number for the Issuer’s common stock is 68215W107. The following table sets forth, in U.S. dollars the high and low closing prices for each calendar quarters indicated, as reported by the OTCQB. The prices in the table may not represent actual transactions and do not include retail markups, markdowns, or commissions.
| Company Common Stock Prices | ||||
2024 | High |
| Low | ||
Quarter ended December 31 | $ | 0.03 |
| $ | 0.01 |
Quarter ended September 30 | $ | 0.02 |
| $ | 0.01 |
Quarter ended June 30 | $ | 0.02 |
| $ | 0.01 |
Quarter ended March 31 | $ | 0.02 |
| $ | 0.02 |
|
|
|
|
|
|
2023 |
|
|
|
|
|
Quarter ended December 31 | $ | 0.03 |
| $ | 0.01 |
Quarter ended September 30 | $ | 0.03 |
| $ | 0.02 |
Quarter ended June 30 | $ | 0.04 |
| $ | 0.02 |
Quarter ended March 31 | $ | 0.05 |
| $ | 0.03 |
On April 9, 2025, the closing quotation per share for our common stock as reported on the OTCQB was $0.0157.
Holders
As of December 31, 2024 there were approximately 45 stockholders of record of our common stock. This figure does not include a substantially greater number of “street name” holders whose shares are held of record by banks, brokers and other financial institutions.
Page 23
Dividends
Common Stock
No dividends have ever been paid on the Common Stock and the Company does not currently anticipate paying any cash or other dividends on the Common Stock. Future dividend policy will be determined by the Board of Directors of the Company in light of prevailing financial need and earnings, if any, of the Company and other relevant factors.
Preferred Stock
Under our articles of incorporation, our Board of Directors is authorized, without stockholder action, to issue preferred stock in one or more series and to fix the number of shares and rights, preferences, and limitations of each series. Among the specific matters that may be determined by the Board of Directors are the dividend rate, the redemption price, if any, conversion rights, if any, the amount payable in the event of any voluntary liquidation or dissolution of our company, and voting rights, if any. As of the date of this report, no shares of preferred stock were issued and outstanding. Payment of dividends on the Common Stock and Preferred Stock is within the discretion of the Board of Directors, is subject to state law, and will depend upon the Company's earnings, if any, its capital requirements, financial condition and other relevant factors.
Transfer Agent and Registrar
Our transfer agent is Colonial Stock Transfer Company, Inc., whose address is 7840 S. 700 E., Sandy, Utah 84070.
Recent Sales of Unregistered Securities
None.
ITEM 6. RESERVED
ITEM 7. MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS
The following discussion contains forward-looking statements within the meaning of Section 27A of the Securities Act and Section 21E of the Exchange Act relating to future events or our future performance. The following discussion should be read in conjunction with our consolidated financial statements and notes to our financial statements included elsewhere in this report. This discussion contains forward-looking statements that relate to future events or our future performance. Although management believes that the assumptions made and expectations reflected in the forward-looking statements are reasonable, we cannot assure that the underlying assumptions will, in fact, prove to be correct or that actual results will not be different from expectations expressed in this report.
Results of Operations
For the years ended December 31, 2024 and 2023
Revenues were $1,019,726 for 2024 compared with $1,055,314 in 2023, a decrease of $35,588, or 3.4%. The Company’s revenues remained steady between 2024 and 2023.
Total cost of goods sold decreased to $561,853 in 2024 from $644,660 in 2023, for a decrease of $82,807. Gross margin was $457,873 in 2024 compared with $410,654 in 2023. Gross margin as a percentage of sales for 2024 was 45 percent compared with 39 percent in 2023.
Our operating expenses for 2024 were $606,373 compared with $606,794 in 2023, a decrease of $421, or 0.06%. General and administrative expense for 2024 was $532,721 compared with $537,473 in 2023. Major components of general and administrative expenses in 2024 were insurance expense of $63,971, rent expense of $43,038 and salary and wages of $219,981. This compares with insurance expense of $53,056, rent expense of $43,298, and salary and wages of $225,609 in 2023. Research and development outlays were $70,323 in 2024 compared with $67,576 in 2023. The increase in general and administrative expense was primarily due to increase in litigation expense.
Page 24
Our net loss in 2024 was $167,137, or ($0.01) per share, compared with $215,406, or ($0.01) per share, in 2023. Additionally, operating loss for the year ended December 31, 2024 was $148,500 compared with $196,140 for the year ended December 31, 2023.
Results for the year ended December 31, 2024 reflect non-cash expenses, including the value of options and warrants granted in the amount of $5,363 and depreciation and amortization of $3,329. For the year ended December 31, 2023, non-cash expenses included the value of options and warrants granted of $15,776, depreciation and amortization of $1,745.
Liquidity and Capital Resources
Overview
Our primary sources of liquidity are working capital funds available from sales. Additionally, from time to time we may raise funds from the equity capital markets to fund our research and development programs, expansion of our business and general operations.
At December 31, 2024, our current liabilities totaled $2,178,041 and our current assets totaled $881,764, resulting in negative working capital of $1,296,277.
We have no firm commitments or obligations for capital expenditures. Substantial discretionary expenditures may be required to enable us to conduct product research, development, manufacturing, marketing and distribution activities. We may need to raise additional capital to facilitate growth and support our long-term product development, manufacturing, and marketing programs. The Company has no established bank-financing arrangements, and it is not anticipated that we will secure any bank financing in the near future. Therefore, it is likely that we may need to seek additional financing through subsequent future public or private sales of our securities, including equity securities. We may also seek funding for the development, manufacturing, and marketing of our products through strategic partnerships and other arrangements with corporate partners. There can be no assurance, however, that such collaborative arrangements or additional funds will be available when needed, or on terms acceptable to us, if at all. If adequate funds are not available, we may be required to curtail one or more of our research and development programs.
We have historically incurred significant losses, which have resulted in a total accumulated deficit of $22,027,484 at December 31, 2024.
Operating Activities
We realized positive cash flow from operations of $30,077 for the year ended December 31, 2024, compared with positive cash flow of $17,211 for the year ended December 31, 2023.
Included in the net loss of $167,137 for the year ended December 31, 2024, are non-cash expenses, which are not a drain on our capital resources. In 2024, these non-cash expenses include the value of options and warrants granted in the amount of $5,363 and depreciation and amortization of $3,329.
Off-Balance Sheet Arrangements
None.
Critical Accounting Policies and Estimates
Accounting Method and Use of Estimates
The Company’s financial statements are prepared using the accrual method of accounting. The preparation of financial statements in conformity with generally accepted accounting principles requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the financial statements and the reported amounts of revenues and expenses
Page 25
during the reporting period. Actual results could differ from those estimates. Areas where significant estimates are required include the following:
Accounts Receivable
Trade receivables are carried at original invoice amount less an estimate made for doubtful receivables based on a review of all outstanding amounts on a monthly basis. Management determines the allowance for doubtful accounts by identifying troubled accounts and by using historical experience applied to an aging of accounts. Trade receivables are written off when deemed uncollectible. Recoveries of trade receivables previously written off are recorded when received.
Inventories
Inventories are stated at the lower of net realizable value, or average cost basis. The Company reviews inventories on hand at least annually and records provisions for estimated excess, slow moving and obsolete inventory, as well as inventory with a carrying value in excess of net realizable value. The regular and systematic inventory valuation reviews include a current assessment of future product demand, historical experience and product expiration.
Accordingly, the Company has established an allowance for the cost of such obsolete inventory.
Long-lived assets
The Company assesses the recoverability of its long-lived assets annually and whether circumstances indicate that there may be an impairment. The Company compares the estimated undiscounted future cash flows to the carrying value of the long-lived assets to determine if an impairment has occurred. In the event that an impairment has occurred, the Company recognizes the impairment immediately.
Property and Equipment
Property and equipment are recorded at cost. Depreciation and amortization are calculated on the straight-line method over the shorter of the lease term or the estimated useful lives of the assets ranging from three to five years.
Income Taxes
Omnitek accounts for income taxes in accordance with Accounting Standards Codification Topic 740, which requires the recognition of deferred tax liabilities and assets at currently enacted tax rates for the expected future tax consequences of events that have been included in the financial statements or tax returns. A valuation allowance is recognized to reduce the net deferred tax asset to an amount that is more likely than not to be realized. Omnitek uses historical experience to determine the likelihood of realization of deferred tax liabilities and assets.
Stock-based Compensation
ASC 718, “Compensation — Stock Compensation,” prescribes accounting and reporting standards for all stock-based payment transactions in which employee services, and, since February 1, 2019, non-employee services, are acquired. Transactions include incurring liabilities, or issuing or offering to issue shares, options and other equity instruments such as employee stock ownership plans and stock appreciation rights. Stock-based payments to employees, including grants of employee stock options, are recognized as compensation expense in the financial statements based on their fair values. That expense is recognized over the period during which an employee is required to provide services in exchange for the award, known as the requisite service period (usually the vesting period).
Liquidity & Going Concerns Policy
Historically, the Company has incurred net losses and negative cash flows from operations. Management believes that based on its operating plan, the projected sales, combined with funds available from its working capital will be sufficient to fund operations for the next twelve months from the date these financial statements were issued. However, there can be no assurance that operations and operating cash flows will continue at the current levels or improve in the near future. From time to time the Company has raised additional capital through the sale of equity
Page 26
and financing activities to support its operations, and should the need arise will attempt to do so in the future, however, it is uncertain whether the Company will be successful in its efforts to raise additional capital in the future, if necessary.
Revenue Recognition
In general, revenue is recognized when a performance obligation is met. A performance obligation is a promise in a contract to transfer a distinct good or service to the customer and is the unit of account for revenue recognition.
We recognize revenue on various products and services as follows:
Products - The Company recognizes revenue from the sale of products as performance obligations are satisfied. Those sales predominantly contain a single delivery element and revenue is recognized at a single point in time when ownership and risks transfer (i.e. the performance obligation has been satisfied). In general, ownership and risk passes FOB shipping point, or as negotiated.
Assurance-type warranties are the only warranties provided by the Company and, as such, Omnitek does not recognize revenue on warranty-related work. Omnitek generally provides a one-year warranty for products that it sells. Warranty claims historically have been insignificant.
Recently Issued Accounting Pronouncements
The Company has evaluated recent accounting pronouncements, and their adoption has not had or is expected to have a material impact on the Company’s financial position, or statements.
In November 2023, the FASB issued ASU 2023-07, "Segment Reporting (Topic 280): Improvements to Reportable Segment Disclosures", which amends the disclosure to improve reportable segment disclosure requirements, primarily through enhanced disclosures about significant segment expenses on an annual and interim basis for to enable investors to develop more decision-useful financial analyses. All public entities will be required to report segment information in accordance with the new guidance starting in annual periods beginning after December 15, 2023. The Company is currently assessing potential impacts of ASU 2023-06 and does not expect the adoption of this guidance will have a material impact on its financial statements and disclosures.
In December 2023, the FASB issued ASU 2023-09, " Income Taxes (Topic 740): Improvements to Income Tax Disclosures", which amends the disclosure to address investor requests for more transparency about income tax information through improvements to income tax disclosures primarily related to the rate reconciliation and income taxes paid information and includes certain other amendments to improve the effectiveness of income tax disclosures. For entities other than public business entities, the requirements will be effective for annual periods beginning after December 15, 2025. The guidance will be applied on a prospective basis with the option to apply the standard retrospectively. Early adoption is permitted. The Company is currently assessing potential impacts of ASU 2023-09 and does not expect the adoption of this guidance will have a material impact on its financial statements and disclosures and the Company is in a loss position and not incurring any tax expenses.
ITEM 7A.QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK
We are a smaller reporting company as defined by Rule 12b-2 of the Securities Exchange Act of 1934 and are not required to provide the information under this item.
ITEM 8. FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA
Our financial statements, including the Report of Independent Registered Public Accounting Firm on our consolidated financial statements, are included following the signature page to this report beginning on page F-1 and are incorporated herein by reference.
Page 27
ITEM 9. CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING AND FINANCIAL DISCLOSURE
None.
ITEM 9A.CONTROLS AND PROCEDURES
Evaluation of Disclosure Controls and Procedures
Management performed an evaluation of the effectiveness of our disclosure controls and procedures (as defined in Rules 13a-15(e) and 15d-15(e) under the Securities Exchange Act of 1934, as amended) as of December 31, 2024. Based on that evaluation, it was concluded that the disclosure controls and procedures were not effective as of December 31, 2024.
Management's Annual Report on Internal Control Over Financial Reporting
Management is responsible for establishing and maintaining adequate internal control over financial reporting, as such term is defined in Exchange Act Rule 13a-15(f). Internal control over financial reporting cannot provide absolute assurance of achieving financial reporting objectives because of its inherent limitations. Internal control over financial reporting is a process that involves human diligence and compliance and is subject to lapses in judgment and breakdowns resulting from human failures. Internal control over financial reporting can also be circumvented by collusion or improper management override. Because of such limitations, there is a risk that material misstatements will not be prevented or detected on a timely basis by internal control over financial reporting. However, these inherent limitations are known features of the financial reporting process. Therefore, it is possible to design into the process safeguards to reduce, though not eliminate, the risk.
Management performed an assessment of the effectiveness of our internal control over financial reporting, using criteria established in the Internal Control - Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (“COSO-2013”). Based on that assessment, management identified material weaknesses in internal control over financial reporting as of December 31, 2024, as further described below. Due to these material weaknesses, management concluded that internal controls over financial reporting as of December 31, 2024, were not effective, based on COSO’s framework.
A material weakness is a deficiency, or a combination of deficiencies, in internal control over financial reporting, such that there is a reasonable possibility that a material misstatement of the Company’s annual or interim financial statements will not be prevented or detected on a timely basis.
As a result of our assessment, we have determined that the Company has a material weakness that relates to a lack of segregation of duties.
Management believes that the material weaknesses set forth above did not have any effect on the Company’s financial results.
This Annual Report does not include an attestation report of the company's registered public accounting firm regarding internal control over financial reporting.
Remediation Plan for the Material Weaknesses
Management has been engaged in developing remediation plans to address the above material weaknesses. In order to address and resolve these deficiencies we are researching the options available given our financial means to do the following: (1) hire outside consultants to review the Company’s financial statements for complex transactions. As we continue to evaluate and work to improve our internal control over financial reporting, we may determine to take additional measures to address the material weaknesses or determine to supplement or modify the remediation measures described above.
Page 28
Changes in Internal Control Over Financial Reporting
There have been no changes in internal control over financial reporting that occurred during our fourth fiscal quarter of 2024 that have materially affected, or are reasonably likely to materially affect, our internal control over financial reporting.
ITEM 9B.OTHER INFORMATION
None
ITEM 9C.DISCLOSURE REGARDING FOREIGN JURISDICTIONS THAT PREVENT INSPECTIONS
Not Applicable.
Page 29
PART III.
ITEM 10. DIRECTORS, EXECUTIVE OFFICERS AND CORPORATE GOVERNANCE
Directors and Executive Officers
Our current directors and executive officers are as follows:
Name |
|
Age |
|
Positions and Offices | Directorship Term | Period of Service as a Director |
Werner Funk |
| 66 |
| President, CEO, Secretary, Principal Accounting Officer and Director | One Year | May 2001 to Present |
|
|
|
|
|
|
|
Gary S. Maier |
| 71 |
| Director | One Year | August 2012 to Present |
|
|
|
|
|
|
|
John M. Palumbo |
| 69 |
| Director | One Year | October 2013 to Present |
Term of Office
All of the Company’s directors hold office until the next annual general meeting of the shareholders or until their successors are elected and qualified. The officers are appointed by our Board of Directors and hold office until their earlier death, retirement, resignation or removal.
Family Relationships
There are no family relationships between any directors or executive officers of Omnitek, either by blood or by marriage.
Business Experience
The business experience during the past five years of each of the persons presently listed above as an Officer or Director of Omnitek or a Significant Employee is as follows:
Werner Funk – Mr. Funk was born in Germany. He has been a Director and the CEO of Omnitek since its formation in May of 2001. Mr. Funk has more than 40 years of experience in international business, manufacturing, engineering, marketing and Internet commerce. He is responsible for management, marketing and new product design. Mr. Funk was educated in Germany where he attended high school and vocational college for automotive technology and graduated with honors receiving a bachelor’s degree in automotive technology. While living in Germany, he worked for Mercedes-Benz and was the assistant crew chief of a Porsche factory sponsored racing team. Mr. Funk moved to the United States in 1978, where upon he started Nology Engineering Inc., a California Corporation, which designs, manufactures and markets automotive products for the performance aftermarket. Mr. Funk also currently serves as the CEO of Nology Engineering Inc. Mr. Funk is listed as the inventor/co-inventor on several patents and patent applications.
Gary S. Maier – Mr. Maier was appointed as a Director of the Company on August 3, 2012, and is an investor relations veteran with more than 35 years of industry experience. He serves as vice president of corporate communications and investor relations for Motorcar Parts of America (Nasdaq: MPAA). He founded Maier & Company, Inc. in 2003. Earlier in his career he was a principal of another Los Angeles-based investor relations firm. He has counseled diverse clients ranging in size from multi-billion-dollar organizations to emerging growth public and private companies across the country. His career includes positions with an international public relations firm and a proxy solicitation firm offering investor relations services, both based in New York, as well as a Chicago-based financial relations agency. His experience also includes local and national political campaigns Maier served as a board member for 18 years, including a term as president of Veterans Park Conservancy, a non-profit community public/private partnership dedicated to the enhancement and preservation of four hundred acres of federal land to honor our nation’s veterans. He served for several years on the board of Southern California’s Colony Theater Company. Maier holds bachelor and master of philosophy degrees from Ohio University and completed course work toward a Ph.D. in philosophy at DePaul University. He served on the adjunct faculties of DePaul and Loyola
Page 30
University in Chicago and is a graduate of New York University’s Graduate School of Business Administration’s Careers in Business program.
John M. Palumbo – Mr. Palumbo is currently the CEO of Larsen Supply Company, a distributor of plumbing supplies. Previously Mr. Palumbo was the CEO of Partschannel, Inc., a distributor of aftermarket collision replacement parts. Prior to this, Mr. Palumbo was the CFO at Solar Integrated Technologies, Inc., and earlier CFO for Keystone Automotive Industries, Inc. (Nasdaq: KEYS), which was subsequently acquired by LKQ Corporation (Nasdaq: LKQ). Mr. Palumbo holds a bachelor of science degree in finance from Canisius College in Buffalo, New York and obtained his EMBA from Peter F. Drucker Claremont Graduate University in Claremont California. Mr. Palumbo is a Certified Public Accountant in the state of California.
Directorships
No Director of Omnitek or person nominated or chosen to become a Director holds any other directorship in any company with a class of securities registered pursuant to section 12 of the Exchange Act or subject to the requirements of section 15(d) of such Act or any other company registered as an investment company under the Investment Company Act of 1940.
Involvement in Certain Legal Proceedings
During the past ten years, no present or former director, executive officer or person nominated to become a director or an executive officer of Omnitek has been or filed:
1.A petition under the Federal bankruptcy laws or any state insolvency law was filed by or against, or a receiver, fiscal agent or similar officer was appointed by a court for the business or property of such person, or any partnership in which he was a general partner at or within two years before the time of such filing, or any corporation or business association of which he was an executive officer at or within two years before the time of such filing;
2.Such person was convicted in a criminal proceeding or is a named subject of a pending criminal proceeding (excluding traffic violations and other minor offenses);
3.Such person was the subject of any order, judgment, or decree, not subsequently reversed, suspended or vacated, of any court of competent jurisdiction, permanently or temporarily enjoining him from, or otherwise limiting, the following activities:
i.Acting as a futures commission merchant, introducing broker, commodity trading advisor, commodity pool operator, floor broker, leverage transaction merchant, any other person regulated by the Commodity Futures Trading Commission, or an associated person of any of the foregoing, or as an investment adviser, underwriter, broker or dealer in securities, or as an affiliated person, director or employee of any investment company, bank, savings and loan association or insurance company, or engaging in or continuing any conduct or practice in connection with such activity;
ii.Engaging in any type of business practice; or
iii.Engaging in any activity in connection with the purchase or sale of any security or commodity or in connection with any violation of Federal or State securities laws or Federal commodities laws;
4.Such person was the subject of any order, judgment or decree, not subsequently reversed, suspended or vacated, of any Federal or State authority barring, suspending or otherwise limiting for more than 60 days the right of such person to engage in any activity described in paragraph (f)(3)(i) of this section, or to be associated with persons engaged in any such activity;
Page 31
5.Such person was found by a court of competent jurisdiction in a civil action or by the Commission to have violated any Federal or State securities law, and the judgment in such civil action or finding by the Commission has not been subsequently reversed, suspended, or vacated;
6.Such person was found by a court of competent jurisdiction in a civil action or by the Commodity Futures Trading Commission to have violated any Federal commodities law, and the judgment in such civil action or finding by the Commodity Futures Trading Commission has not been subsequently reversed, suspended or vacated;
7.Such person was the subject of, or a party to, any Federal or State judicial or administrative order, judgment, decree, or finding, not subsequently reversed, suspended or vacated, relating to an alleged violation of:
i.Any Federal or State securities or commodities law or regulation; or
ii.Any law or regulation respecting financial institutions or insurance companies including, but not limited to, a temporary or permanent injunction, order of disgorgement or restitution, civil money penalty or temporary or permanent cease-and-desist order, or removal or prohibition order; or
iii.Any law or regulation prohibiting mail or wire fraud or fraud in connection with any business entity; or
8.Such person was the subject of, or a party to, any sanction or order, not subsequently reversed, suspended or vacated, of any self-regulatory organization (as defined in Section 3(a)(26) of the Exchange Act (15 U.S.C. 78c(a)(26))), any registered entity (as defined in Section 1(a)(29) of the Commodity Exchange Act (7 U.S.C. 1(a)(29))), or any equivalent exchange, association, entity or organization that has disciplinary authority over its members or persons associated with a member.
Section 16(a) Beneficial Ownership Reporting Compliance
Section 16(a) of the Securities Exchange Act of 1934 requires Omnitek’s executive officers, directors and persons who own more than ten percent of the Omnitek’s Common Stock, to file initial reports of beneficial ownership on Form 3, changes in beneficial ownership on Form 4 and an annual statement of beneficial ownership on Form 5, with the SEC. Such executive officers, directors and greater than ten percent shareholders are required by SEC rules to furnish Omnitek with copies of all such forms that they have filed.
Based solely on its review of the copies of such forms filed with the SEC electronically, received by Omnitek and representations from certain reporting persons, Omnitek believes that for the fiscal year ended December 31, 2024, all the officers, directors and more than 10% beneficial owners complied with the above-described filing requirements.
Code of Ethics
On August 3, 2012, Omnitek, in accordance with Section 406 of the Sarbanes-Oxley Act of 2002 adopted a Code of Ethics that applies to its principal executive officer, principal financial officer, and principal accounting officer that is reasonably designed to deter wrongdoing and to promote:
| ·Honest and ethical conduct, including ethical handling of actual or apparent conflicts of interest between personal and professional relationship; |
| ·Full, fair, accurate, timely and understandable disclosure in SEC reports and in other public communications; |
| ·Compliance with applicable governmental laws, rules and regulations; |
| ·Prompt internal reporting of violations of the code of ethics to appropriate person or persons identified in the code of ethics; and |
| ·Accountability for adherence to the code of ethics. |
Page 32
The description of the Code of Ethics contained in this report is qualified in its entirety by reference to the full text of the Code of Ethics filed as Exhibit 14.01 to that certain Current Report on Form 8-K filed August 7, 2012. The Code of Ethics shall be available on Omnitek’s website at www.omnitekcorp.com.
Audit Committee and Audit Committee Financial Expert
Our board of directors is comprised of three directors, two of which are outside independent directors and make up the audit committee. John M. Palumbo, considered an audit committee financial expert, chairs our audit committee.
ITEM 11.EXECUTIVE COMPENSATION
Summary Compensation Table
The following table sets forth the compensation paid to our Chief Executive Officer and those executive officers that earned in excess of $100,000 during the periods ended December 31, 2024, and 2023, (collectively, the “Named Executive Officers”):
Name and Principal Position | Year Ended Dec. 31 |
| Salary ($) | Stock Award(s) ($) |
| Option Awards ($) | Non-Equity Incentive Plan Compensation |
| All Other Compensation ($) |
| Total ($) |
(a) | (b) |
| (c) | (e) |
| (f) | (g) |
| (i) |
| (j) |
Werner Funk | 2024 | $ | 150,000 | - | $ | 3,771 | - | $ | - | $ | 153,771 |
CEO, President, and Secretary | 2023 | $ | 150,000 | - | $ | 1,795 | - | $ | - | $ | 151,795 |
Narrative Disclosure to Summary Compensation Table
On April 18, 2022, in consideration of the services as director, the Corporation hereby grant to Werner Funk, a Non-Qualified Stock Option pursuant to the 2017 Long-Term Incentive Plan, to purchase 50,000 shares of common stock, at an exercise price of $0.05841 representing 110% of the closing price of the common stock of the Corporation as of April 15, 2022; Said Options shall vest and be exercisable immediately and shall be exercisable for a period of seven years from the date of grant.
On April 18, 2023, the Company granted to Werner Funk, President and CEO, a Non-qualified Stock Option pursuant to the 2017 Long-Term Incentive Plan, to purchase 50,000 shares of common stock at any exercise price of $0.0397, representing 110% of the closing price of the common stock of the Corporation as of such date. Said Options shall vest and be exercisable immediately and shall be exercisable for a period of seven years from the date of grant.
On May 3, 2024, the Company entered into new Employment Agreement with Mr. Funk. The term of the Employment Agreement shall be for a period of three (3) years which term would automatically renew for one additional year; Base Salary of $150,000 per year with such salary reviewed on an annual basis by the Board of Directors. In conjunction with and pursuant to the terms of the Employment Agreement, the Company granted to Mr. Funk a Non-Qualified Stock Option pursuant to the 2017 Long-Term Incentive Plan, to purchase 300,000 shares of common stock, at an exercise price of $0.015 per share representing 110% of the closing price of the common stock as reported on the OTCBB as of the date of grant (i.e. May 3, 2024). One-thirty sixth (1/36) of the total number of shares subject to the Option shall vest and become exercisable at the end of each month following the Date of Grant on the same day of each month as the Date of Grant, so that all shares subject to the Options will be fully vested on the third anniversary of the Date of Grant. The Options will be exercisable for a period of seven (7) years from the Date of Grant will be incentive stock options to the extent permitted by applicable law.
All securities were issued pursuant to an exemption from registration provided by Section 4(a)(2) of the Securities Act of 1933. The individual receiving the options is intimately acquainted with the Company’s business plan and
Page 33
proposed activities at the time of issuance, and possessed information on the Company necessary to make an informed investment decision.
No Named Executive Officer exercised any options or SARs during the last completed fiscal year or owned any unexercised options or SARs at the end of the fiscal year.
There are no agreements or understandings for any executive officer to resign at the request of another person. None of our executive officers act, or will act, on behalf of, or at the direction of, any other person.
Compensation of Directors
There was no compensation paid to any director who was not a Named Executive Officer during the year ended December 31, 2024, other than that provided for attendance at meetings.
There are no employment contracts, compensatory plans or arrangements, including payments to be received from Omnitek with respect to any Director that would result in payments to such person because of his or her resignation with Omnitek, or its subsidiaries, any change in control of Omnitek. There are no agreements or understandings for any Director to resign at the request of another person. None of our Directors or executive officers acts or will act on behalf of or at the direction of any other person.
On April 25, 2024, in consideration for their services as independent directors, the Company granted to each of Messrs. Gary S. Maier and John M. Palumbo, a Non-Qualified Stock Option pursuant to the 2017 Long-Term Incentive Plan to purchase 50,000 shares of common stock at an exercise price of $0.0160, representing 100% of the closing price of the common stock of the Corporation as of April 24, 2024. Said Options shall vest and be exercisable immediately and shall be exercisable for a period of seven years from the date of grant.
Also on April 25, 2024, the Company granted to Werner Funk, President and CEO, a Non-qualified Stock Option pursuant to the 2017 Long-Term Incentive Plan, to purchase 50,000 shares of common stock at any exercise price of $0.0176, representing 110% of the closing price of the common stock of the Corporation as of April 24, 2024. Said Options shall vest and be exercisable immediately and shall be exercisable for a period of seven years from the date of grant.
On May 3, 2024 in conjunction with and pursuant to the terms of the Employment Agreement entered into between the Company and Mr. Funk, the Company granted to Mr. Funk a Non-Qualified Stock Option pursuant to the 2017 Long-Term Incentive Plan, to purchase 300,000 shares of common stock, at an exercise price of $0.015 per share representing 110% of the closing price of the common stock as reported on the OTCBB as of the date of grant (i.e. May 3, 2024). One-thirty sixth (1/36) of the total number of shares subject to the Option shall vest and become exercisable at the end of each month following the Date of Grant on the same day of each month as the Date of Grant, so that all shares subject to the Options will be fully vested on the third anniversary of the Date of Grant. The Options will be exercisable for a period of seven (7) years from the Date of Grant will be incentive stock options to the extent permitted by applicable law.
No underwriters were used. The securities were issued pursuant to an exemption from registration provided by Section 4(a)(2) of the Securities Act of 1933. The individuals receiving the options were intimately acquainted with the Company’s business plan and proposed activities at the time of issuance and possessed information on the Company necessary to make an informed investment decision.
Outstanding Equity Awards At Year-End
The following table provides information for the named executive officers on stock option holdings as of December 31, 2024.
Page 34
Name | Grant Date | Number of Shares of Stock Underlying Unexercised Vested Options (#) | Number of Shares of Stock Underlying Options that Have Not Vested (#) | Equity Incentive plan awards: Number of securities underlying unexercised unearned options (#) | Option Exercise Price ($) | Option Expiration Date | |
Werner Funk | 1/11/2018 | 50,000 | - | - | $ | 0.077 | 1/10/2025 |
| 1/15/2018 | 300,000 | - | - | $ | 0.077 | 1/14/2025 |
| 1/16/2019 | 50,000 | - | - | $ | 0.099 | 1/15/2026 |
| 3/27/2020 | 50,000 | - | - | $ | 0.066 | 3/26/2027 |
| 3/10/2021 | 300,000 |
| - | $ | 0.116 | 3/9/2028 |
| 4/18/2022 | 50,000 | - | - | $ | 0.0584 | 4/17/2029 |
| 4/18/2023 | 50,000 | - | - | $ | 0.0397 | 4/17/2030 |
| 4/25/ 2024 | 50,000 | - | - | $ | 0.0176 | 4/24/2031 |
| 5/3/2024 | 300,000 | 241,667 | - | $ | 0.015 | 5/2/2031 |
ITEM 12.SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT AND RELATED STOCKHOLDER MATTERS
The following tables sets forth certain information, as of December 31, 2024, respecting the beneficial ownership of our outstanding common stock by: (i) any holder of more than 5%; (ii) each of the Named Executive Officers (defined as any person who was principal executive officer during the preceding fiscal year and each other highest compensated executive officers earning more than $100,000 during the last fiscal year) and directors; and (iii) our directors and Named Executive Officers as a group.
Security Ownership of Certain Beneficial Owners
The following table shows the amount of common stock beneficially owned by holders of more than 5% of the outstanding shares of any class of our voting securities.
Title of Class |
|
| Name and Address of Beneficial Owner |
|
| Number and Nature of Beneficial Owner |
|
Percent of Class |
Common Stock |
|
| Werner Funk Trust 1345 Specialty Dr. #E Vista, CA 92081 |
|
| 9,333,192(1) (2) |
| 42.49% |
Beneficial ownership is determined in accordance with the rules of the Securities and Exchange Commission (“SEC”) which generally attribute beneficial ownership of securities to person, entity or group that directly or indirectly has or shares voting power or investment power with respect to those securities and includes the power to dispose, or direct the disposition of such securities, and includes shares of our common stock issuable pursuant to the exercise of stock options, warrants, preferred stock or other securities that are immediately exercisable or convertible or exercisable or convertible within 60 days.
To calculate a stockholder’s percentage of beneficial ownership of common stock, we must include in the numerator and denominator those shares of common stock underlying options, warrants and convertible securities that such stockholder is considered to beneficially own. Shares of common stock underlying options, warrants and convertible securities held by other stockholders, however, are disregarded in this calculation. Therefore, the denominator used in calculating beneficial ownership of each of the stockholders may be different.
(1)Consists of 8,358,132 shares of common stock owned beneficially and of record directly, currently vested options to purchase 958,333 shares of common stock, and options to purchase 16,667 shares of common stock which Mr. Funk currently has or will have within 60 days the right to acquire pursuant to stock options.
Page 35
(2)Werner Funk, the Trustee of the Werner Funk Trust UDT 9/25/07 has sole voting and dispositive power of said shares.
Security Ownership of Management
The following table sets forth the number of securities and nature of beneficial ownership of any class of our voting securities held by all of Omnitek’s current directors and executive officers.
Title of Class |
|
| Name and Address of Beneficial Owner |
|
| Number and Nature of Beneficial Owner |
|
Percent of Class |
Common Stock |
|
| Werner Funk Trust 1345 Specialty Dr. #E Vista, CA 92081 |
|
| 9,333,192(1) (2) |
| 42.49% |
|
|
|
|
|
|
|
|
|
Common Stock |
|
| Gary S. Maier 1345 Specialty Dr. #E Vista, CA 92081 |
|
| 461,500(3) |
| 2.10% |
|
|
|
|
|
|
|
|
|
Common Stock |
|
| John M. Palumbo 1345 Specialty Dr. #E Vista, CA 92081 |
|
| 499,820(4) |
| 2.28% |
|
|
|
|
|
|
|
|
|
Common Stock |
|
| Directors and Executive Officers as a Group (3 persons) |
|
| 10,294,512 |
| 46.87% |
As of April 15, 2025, there are 21,948,091 shares of common stock outstanding.
Beneficial ownership is determined in accordance with the rules of the Securities and Exchange Commission (“SEC”) which generally attribute beneficial ownership of securities to person, entity or group that directly or indirectly has or shares voting power or investment power with respect to those securities and includes the power to dispose, or direct the disposition of such securities, and includes shares of our common stock issuable pursuant to the exercise of stock options, warrants, preferred stock or other securities that are immediately exercisable or convertible or exercisable or convertible within 60 days.
To calculate a stockholder’s percentage of beneficial ownership of common stock, we must include in the numerator and denominator those shares of common stock underlying options, warrants and convertible securities that such stockholder is considered to beneficially own. Shares of common stock underlying options, warrants and convertible securities held by other stockholders, however, are disregarded in this calculation. Therefore, the denominator used in calculating beneficial ownership of each of the stockholders may be different.
(1)Consists of 8,358,132 shares of common stock owned beneficially and of record by Mr. Funk directly, currently vested options to purchase 958,333 shares of common stock, and options to purchase 16,667 shares of common stock which Mr. Funk currently has or will have within 60 days the right to acquire pursuant to stock options.
(2)Werner Funk, the Trustee of the Werner Funk Trust UDT 9/25/07 has sole voting and dispositive power of said shares.
(3)Consists of 111,500 shares of common stock owned beneficially and of record by Mr. Maier directly, and currently vested options to purchase 350,000 shares of common stock. Does not include 10,000 shares of common stock held by Mr. Maier’s spouse.
(4)Consists of 149,820 shares of common stock owned beneficially and of record by Mr. Palumbo directly, and currently vested options to purchase 350,000 shares of common stock.
Page 36
Changes in Control
To the best of Omnitek’s knowledge, there are no present arrangements or pledges of Omnitek’s securities, which may result in a change in control.
Securities Authorized for Issuance Under Equity Compensation Plans
The following table sets forth information as of December 31, 2024 with respect to our equity compensation plans previously approved by stockholders and equity compensation plans not previously approved by stockholders.
| Equity Compensation Plan Information | |||
| Number of securities to be issued upon exercise of outstanding options, warrants and rights
|
| Weighted average exercise price of outstanding options, warrants and rights
| Number of securities remaining available for future issuance under equity compensation plans (excluding securities reflected in column (a)) |
Plan Category | (a) |
| (b) | (c) |
Equity compensation plans approved by stockholders | 2,340,000(1) | $ | 0.25 | 3,284,444(2) |
|
|
|
|
|
Equity compensation plans not approved by stockholders | N/A |
| N/A | N/A |
Total | 2,340,000 | $ | 0.25 | 3,284,444 |
(1)Of these shares, 290,000 options are outstanding under the 2017 Plan and 2,050,000 options are outstanding under the 2015 Plan.
(2)Represents 2,950,000 shares available for issuance under the 2017 Plan and 334,444 shares available for issuance under the 2015 Plan. No new awards will be granted under the 2011 Plan. Shares available under the 2015 Plan may be used for any type of award authorized in that plan, including stock options, stock appreciation rights, and full-value awards.
On September 11, 2015, the Board of Directors adopted the Omnitek Engineering Corp. 2015 Long-term Incentive Plan (the “2015 Plan”), under which 2,500,000 shares of Company’s common stock were reserved for issuance by the company to attract and retain employees and directors of the Company and to provide such persons with incentives and awards for superior performance and providing services to the Company. The 2015 Plan is administered by a committee comprised of the Board of Directors of the Company or appointed by the Board of Directors, which has broad flexibility in designing stock-based incentives. The Board of Directors determines the number of shares granted and the option exercise price, pursuant to the terms of the Plan.
On June 30, 2017, the Board of Directors adopted the Omnitek Engineering Corp. 2017 Long-term Incentive Plan (the “2017 Plan”), under which 5,000,000 shares of Company’s common stock were reserved for issuance by the company to attract and retain employees and directors of the Company and to provide such persons with incentives and awards for superior performance and providing services to the Company. The 2017 Plan was approved by the shareholders on October 27, 2017. The 2017 Plan is administered by a committee comprised of the Board of Directors of the Company or appointed by the Board of Directors, which has broad flexibility in designing stock-based incentives. The Board of Directors determines the number of shares granted and the option exercise price, pursuant to the terms of the Plan.
Page 37
ITEM 13. CERTAIN RELATIONSHIPS AND RELATED TRANSACTIONS, AND DIRECTOR INDEPENDENCE
Transactions with Related Persons
On January 19, 2017, the Company issued a promissory note for $15,000 to its CEO. The note has an annual interest rate of 5% and is unsecured. The principal amount of the note and all accrued interest is due and payable on or before January 19, 2018. The maturity date of the note was extended annually for additional one-year period, with a current due date of January 19, 2024. On September 15, 2023, the lender elected to transfer the unpaid principal balance of $15,000 to and consolidate the balance with the Working Capital Promissory Note.
On June 4, 2021, the Company issued an unsecured convertible promissory note for $30,000 to its CEO. Simple interest at the rate of 8% per annum accrues on the unpaid principal balance of the note. The note calls for monthly installment payments of $1,050 commencing on July 4, 2021. The unpaid principal and accrued interest was due and payable on or before June 4, 2023. On the maturity date, June 4, 2023, the lender elected to transfer the unpaid principal balance of $7,940 to the Working Capital Promissory Note.
On June 4, 2021, the Company issued a convertible promissory note for $20,000 to a board member. The note has an annual interest rate of 8% and is unsecured. The principal amount of the note and all accrued interest is due and payable on or before December 4, 2021. On December 14, 2021, the maturity date of convertible promissory note was extended for an additional period of 3 months until March 4, 2022. Subsequently the maturity date was extended for additional periods to June 4, 2022, September 4, 2022, December 4, 2022, June 4, 2023 and December 4, 2023. On December 4, 2023 the Company made a payment of $10,000 reducing the outstanding balance to $10,000 and also extended the note until December 4, 2024. On December 4, 2024 the note was extended until December 4, 2025. The note has a conversion feature, wherein, at the maturity date, the lender may convert the remaining principal balance and any unpaid accrued interest into shares of the Company’s common stock. The number of shares of common stock to be issued upon such conversion shall be equal to the quotient obtained by dividing (i) the remaining unpaid principal balance and any unpaid accrued interest of this note by (ii) 90% of the average closing price of the common stock of the Company, for the five (5) trading days (between days 15 and 10 days) before the maturity date. Due to this provision, the Company considered whether the embedded conversion option qualifies for derivative accounting under ASC 815-15 “Derivatives and Hedging.” As the note is not convertible until maturity, no derivative liability was recognized as of December 31, 2024.
As of December 31, 2024, and December 31, 2023, Convertible Notes – Related Party consisted of the following:
| December 31, 2024 |
| December 31, 2023 | ||||
Convertible Notes payable, related parties |
| $ | 10,000 |
|
| $ | 10,000 |
Less current portion |
|
| (10,000) |
|
|
| (10,000) |
Total |
| $ | - |
|
|
| - |
On April 25, 2024, in consideration for their services as directors, the Company granted (a) to each of our independent directors, Messrs. Gary S. Maier and John M. Palumbo, a Non-Qualified Stock Option pursuant to the 2017 Long-Term Incentive Plan to purchase 50,000 shares of common stock, at an exercise price of $0.016, representing 100% of the closing price of the common stock of the Corporation as of such date, and (b) to director Werner Funk, a Non-Qualified Stock Option pursuant to purchase 50,000 shares of common stock, at an exercise price of $0.0176, representing 110% of the closing price of the common stock of the Corporation as of such date. Said Options shall vest and be exercisable immediately and shall be exercisable for a period of seven years from the date of grant.
On May 3, 2024 in conjunction with and pursuant to the terms of the Employment Agreement entered into between the Company and Mr. Funk, the Company granted to Mr. Funk a Non-Qualified Stock Option pursuant to the 2017 Long-Term Incentive Plan, to purchase 300,000 shares of common stock, at an exercise price of $0.015 per share representing 110% of the closing price of the common stock as reported on the OTCBB as of the date of grant (i.e. May 3, 2024). One-thirty sixth (1/36) of the total number of shares subject to the Option shall vest and become exercisable at the end of each month following the Date of Grant on the same day of each month as the Date of Grant, so that all shares subject to the Options will be fully vested on the third anniversary of the Date of Grant. The
Page 38
Options will be exercisable for a period of seven (7) years from the Date of Grant will be incentive stock options to the extent permitted by applicable law.
Director Independence
The Board has determined that two of Omnitek’s Directors, Messrs. Gary S. Maier, and John M. Palumbo, have met the independence requirements based upon the application of objective categorical standards adopted by the Board. In making a determination regarding a Director’s independence, the Board considers all relevant facts and circumstances, including the Director’s commercial, banking, consulting, legal, accounting, charitable and familial relationships and such other criteria as the Board may determine from time to time.
ITEM 14. PRINCIPAL ACCOUNTANT FEES AND SERVICES
Audit Fees
During the fiscal year ended December 31, 2024, we incurred $34,280 in fees to our principal independent accountants for professional services rendered in connection with the audit and reviews of our financial statements for fiscal year ended December 31, 2024.
During the fiscal year ended December 31, 2023, we incurred $54,643 in fees to our principal independent accountants for professional services rendered in connection with the audit and reviews of our financial statements for fiscal year ended December 31, 2023.
Audit-Related Fees
The aggregate fees billed during the fiscal years ended December 31, 2024, and 2023, for assurance and related services by our principal independent accountants that are reasonably related to the performance of the audit or review of our financial statements and are not reported under Item 9(e)(1) of Schedule 14A was $0 and $0, respectively.
Tax Fees
The aggregate fees billed during the fiscal years ended December 31, 2024, and 2023, for professional services rendered by our principal accountant for tax compliance, tax advice and tax planning was $3,250 and $3,250, respectively.
All Other Fees
The aggregate fees billed during the fiscal years ended December 31, 2024, and 2023, for products and services provided by our principal independent accountants (other than the services reported in Items 9(e)(1) through 9(e)(3) of Schedule 14A was $0 and $0, respectively.
Page 39
PART IV.
ITEM 15. EXHIBITS AND FINANCIAL STATEMENT SCHEDULES
1.Financial Statements. The following financial statements are filed as part of this report:
| Page |
Audited Financial Statements for the Years Ended December 31, 2024 and 2023: |
|
F-1 | |
F-4 | |
Statements of Operations for the Years Ended December 31, 2024 and 2023 | F-5 |
Statements of Cash Flows for the Years Ended December 31, 2024 and 2023 | F-6 |
Statements of Changes in Stockholders’ Deficit for the Years December 31, 2024 and 2023 | F-7 |
F-8 |
3. Exhibits. The following exhibits are either filed as a part hereof or are incorporated by reference. Exhibit numbers correspond to the numbering system in Item 601 of Regulation S-K.
Exhibit Number* |
|
Description of Exhibit | |
3(i) |
| ||
3(ii) |
| ||
10.1 |
| ||
14 |
| Code of Ethics (3) | |
31(i) |
| CEO certification pursuant to Section 302 of the Sarbanes – Oxley Act of 2002 (4) | |
31(ii) |
| CFO certification pursuant to Section 302 of the Sarbanes – Oxley Act of 2002 (4) | |
32 |
| ||
101** |
| The following materials from the Company's Annual Report on Form 10-K for the year ended December 31, 2024 formatted in Extensible Business Reporting Language ("XBRL"): (i) the balance sheets (unaudited); (ii) the statements of operations (unaudited); (iii) the statements of cash flows (unaudited); and, (iv) related notes. | |
101.INS |
| XBRL Instance Document | |
101.SCH |
| XBRL Taxonomy Extension Schema | |
101.CAL |
| XBRL Taxonomy Extension Calculation Linkbase | |
101.DEF |
| XBRL Taxonomy Extension Definition Linkbase | |
101.LAB |
| XBRL Taxonomy Extension Label Linkbase | |
|
| ||
(1) Incorporated by reference from our Registration Statement on Form 10 filed with the SEC on April 27, 2010.
(2) Incorporated by reference from our Current Report on Form 8-K filed with the SEC on May 9, 2024.
(3) Incorporated by reference from our Current Report on Form 8-K filed with the SEC on August 7, 2012.
(4) Filed herewith
* | All exhibits are numbered with the number preceding the decimal indicating the applicable SEC reference number in Item 601 and the number following the decimal indicating the sequence of the particular document. |
** | Users of this data are advised that, pursuant to Rule 406T of Regulation S-T, these interactive data files are deemed not filed or part of a registration statement or Annual Report for purposes of Sections 11 or 12 of the Securities Act of 1933 or Section 18 of the Exchange Act of 1934 and otherwise are not subject to liability. |
ITEM 16.FORM 10-K Summary
Not applicable
Page 40
SIGNATURES
Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the Registrant caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.
| Omnitek Engineering Corp. | |
|
/s/ Werner Funk | |
Dated: April 15, 2025 |
|
|
| By: Werner Funk | |
| Its: Chief Executive Officer, Secretary, | |
| Principal Executive Officer and Principal Accounting Officer | |
|
| |
Pursuant to the requirement of the Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of the Registrant and in the capacities and on the dates indicated:
|
|
Dated: April 15, 2025 | /s/ Werner Funk |
| Werner Funk, Director |
|
|
|
|
|
|
Dated: April 15, 2025 | /s/ Gary S. Maier |
| Gary Maier, Director |
|
|
|
|
Dated: April 15, 2025 | /s/ John M. Palumbo |
| John M. Palumbo, Director |
Page 41
OMNITEK ENGINEERING CORP.
FINANCIAL STATEMENTS
December 31, 2024 and 2023
C O N T E N T S
| Page |
|
|
Report of Independent Registered Public Accounting Firm PCAOB ID: | F-1 |
F-3 | |
F-4 | |
F-5 | |
F-6 | |
F-7 |
Page 42
Report of Independent Registered Public Accounting Firm
To the Shareholders and Board of Directors of Omnitek Engineering Corp.
Opinion on the Financial Statements
We have audited the accompanying balance sheets of Omnitek Engineering Corp. (the "Company”) as of December 31, 2024 and 2023, the related Statement of Operations, Statement of Stockholders’ Deficit and Statement of Cash Flows, for each of the two years in the period ended December 31, 2024, and the related notes (collectively referred to as the “financial statements”). In our opinion, the financial statements present fairly, in all material respects, the financial position of the Company as of December 31, 2024 and 2023, and the result of its operations and its cash flow for each of the two years in the period ended December 31, 2024, in conformity with accounting principles generally accepted in the United States of America.
Substantial Doubt about the entity's ability to continue as going concern
The accompanying financial statements have been prepared assuming that the Company will continue as a going concern. As discussed in Note 2 to the financial statements, the Company has suffered recurring operating losses and has an accumulated deficit of $ 22,027,484 and $ 21,860,347 as of December 31, 2024, and 2023 respectively and working capital deficit of $1,296,277 and $1,096,991 as of December 31, 2024 and 2023. These conditions raise substantial doubt about its ability to continue as a going concern. Management's plans in regard to these matters are also described in Note 2. The financial statements do not include any adjustments that might result from the outcome of this uncertainty.
Basis for Opinion
These financial statements are the responsibility of the Company’s management. Our responsibility is to express an opinion on company's financial statements based on our audits. We are a public accounting firm registered with the Public Company Accounting Oversight Board (United States) ("PCAOB") and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.
We conducted our audits in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement, whether due to error or fraud. The Company is not required to have, nor were we engaged to perform, an audit of its internal control over financial reporting. As part of our audits, we are required to obtain an understanding of internal control over financial reporting but not for the purpose of expressing an opinion on the effectiveness of the Company’s internal control over financial reporting. Accordingly, we express no such opinion.
Our audit included performing procedures to assess the risks of material misstatement of the financial statements, whether due to error or fraud, and performing procedures that respond to those risks. Such procedures included examining, on a test basis, evidence regarding the amounts and disclosures in the financial statements. Our audits also included evaluating the accounting principles used and significant estimates made by management, as well as evaluating the overall presentation of financial statements. We believe that our audits provide a reasonable basis for our opinion.
Critical Audit Matters
Critical Audit matters are matters arising from the current period audit of the financial statements that were communicated or required to be communicated to the audit committee and that: (1) relate to accounts or disclosures that are material to the financial statements and (2) involved our especially challenging, subjective or complex judgments. The communication of critical audit matters does not alter in any way our opinion on the financial statements, taken as whole, and we are not, by communicating the critical audit matters below, providing separate audit opinion on the critical audit matters or on the accounts or disclosures to which they relate.
Page F-1
Allowance for Inventory obsolescence
Description of the Matter:
As described in Note 2(e) and Note 6 to the financial statements, the Company's inventories are valued at the lower of cost or net realizable value, determined on an average cost basis. The Company also determines a reserve for slow moving and obsolete inventory equal to the difference between the cost of the inventory and the estimated net realizable value of the inventory based on estimated reserve percentages, which consider historical usage, known trends, inventory age, and market conditions. At December 31, 2024, the approximate balance of inventory and inventory reserves were $1,275,665 and $1,008,049 respectively.
We identified the reserve for slow moving and obsolete inventory as a critical audit matter, because of the significant judgment by management in estimating the slow moving and out of date inventory reserve, and the high degree of auditor judgment, subjectivity, and effort in performing procedures and evaluating the reasonableness of the significant assumptions used in developing the reserve.
How we addressed the matter in our Audit.
Our audit procedures related to the following:
•We evaluated the reasonableness of the significant assumptions used by management.
•We tested the accuracy and relevance of the management's estimates of slow-moving inventory.
•We tested the calculations and application of management's methodologies related to the valuation estimates of slow-moving inventory.
•We evaluated the impact of the allowance/write back of inventory reserve recorded in the financial statements
/s/
We have served as the Company’s auditor since 2023.
April 15, 2025
Page F-2
OMNITEK ENGINEERING CORP.
Balance Sheets
|
| December 31, |
| December 31, |
| 2024 |
| 2023 | |
ASSETS |
|
|
|
|
CURRENT ASSETS |
|
|
|
|
Cash |
| $ |
| $ |
Accounts receivable, net |
|
| ||
Accounts receivable - related parties |
|
| ||
Inventories, net |
|
| ||
Deposits |
|
| ||
Total Current Assets |
|
| ||
|
|
|
|
|
PROPERTY & EQUIPMENT, net |
|
| ||
|
|
|
|
|
OTHER ASSETS |
|
|
|
|
Operating lease – right-of-use asset |
|
| ||
Long-term deposit |
|
| ||
Total Long-Term Assets |
|
| ||
|
|
|
|
|
TOTAL ASSETS |
| $ |
| $ |
|
|
|
|
|
LIABILITIES AND STOCKHOLDERS' DEFICIT |
|
|
|
|
CURRENT LIABILITIES |
|
|
|
|
Accounts payable and accrued expenses |
| $ |
| $ |
Accrued management compensation |
|
| ||
Accounts payable - related parties |
|
| ||
Notes payable - related parties |
|
| ||
Convertible notes payable – related party |
|
| ||
Customer deposits |
|
| ||
Operating lease liabilities - current |
|
| ||
Total Current Liabilities |
|
| ||
|
|
|
|
|
LONG-TERM LIABILITIES |
|
|
|
|
Loans payable – SBA |
|
| ||
Operating lease liabilities – long-term |
|
| ||
Total Long-term Liabilities |
|
| ||
Total Liabilities |
|
| ||
|
|
|
|
|
STOCKHOLDERS' DEFICIT |
|
|
|
|
Common stock, |
|
| ||
Additional paid-in capital |
|
| ||
Accumulated deficit |
| ( |
| ( |
Total Stockholders' Deficit |
| ( |
| ( |
|
|
|
|
|
TOTAL LIABILITIES AND STOCKHOLDERS' DEFICIT |
| $ |
| $ |
The accompanying notes are an integral part of these financial statements.
Page F-3
OMNITEK ENGINEERING CORP.
Statements of Operations
|
|
|
| For the |
| For the | ||
|
|
|
| Year Ended |
| Year Ended | ||
|
|
|
| December 31, |
| December 31, | ||
| 2024 |
| 2023 | |||||
|
|
|
|
|
|
|
|
|
REVENUES |
| $ |
| $ | ||||
COST OF GOODS SOLD |
|
|
|
| ||||
|
|
|
|
|
|
| ||
GROSS MARGIN |
|
|
|
| ||||
|
|
|
|
|
|
|
|
|
OPERATING EXPENSES |
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
| General and administrative |
|
|
|
| |||
| Research and development |
|
|
|
| |||
| Depreciation and amortization |
|
|
|
| |||
|
|
|
|
|
|
|
|
|
|
| Total Operating Expenses |
|
|
|
| ||
|
|
|
|
|
|
|
|
|
LOSS FROM OPERATIONS |
|
| ( |
|
| ( | ||
|
|
|
|
|
|
|
|
|
OTHER INCOME (EXPENSE) |
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
| Allowance for obsolete inventory |
|
| ( |
|
| ||
| Other Income |
|
|
|
| |||
| Interest expense |
|
| ( |
|
| ( | |
|
|
|
|
|
|
|
|
|
|
| Total Other Income (Expense) |
|
| ( |
|
| ( |
|
|
|
|
|
|
|
|
|
LOSS BEFORE INCOME TAXES |
|
| ( |
|
| ( | ||
INCOME TAX EXPENSE |
|
|
|
| ||||
|
|
|
|
|
|
|
|
|
NET LOSS |
| $ | ( |
| $ | ( | ||
|
|
|
|
|
|
|
|
|
BASIC AND DILUTED LOSS PER SHARE |
| $ | ( |
| $ | ( | ||
|
|
|
|
|
|
|
|
|
WEIGHTED AVERAGE NUMBER |
|
|
|
|
|
| ||
OF COMMON SHARES OUTSTANDING |
|
|
|
|
|
| ||
- BASIC |
|
|
|
| ||||
- FULLY DILUTED |
|
|
|
| ||||
The accompanying notes are an integral part of these financial statements. | ||||||||
Page F-4
OMNITEK ENGINEERING CORP.
Statements of Cash Flows
|
|
|
| For the |
| For the | ||
|
|
|
| Year Ended |
| Year Ended | ||
|
|
|
| December 31, |
| December 31, | ||
2024 |
| 2023 | ||||||
OPERATING ACTIVITIES |
|
|
|
|
| |||
| Net income (loss) | $ | ( |
| $ | ( | ||
| Adjustments to reconcile net loss to net cash used in operating activities: |
|
|
|
|
| ||
|
| Amortization and depreciation expense |
|
|
| |||
|
| Options and warrants issued for services |
|
|
| |||
|
| Write-off of contract asset |
|
|
| |||
|
| Amortization of ROU asset |
|
|
| |||
|
| Inventory reserve |
|
|
| ( | ||
| Changes in operating assets and liabilities: |
|
|
|
|
| ||
|
| Accounts receivable |
|
|
| ( | ||
|
| Operating lease liability |
| ( |
|
| ( | |
|
| Accounts receivable–related parties |
| ( |
|
| ||
|
| Deposits |
| ( |
|
| ( | |
|
| Inventory |
|
|
| |||
|
| Accounts payable and accrued expenses |
|
|
| ( | ||
|
| Customer deposits |
|
|
| |||
|
| Accounts payable-related parties |
|
|
| |||
|
| Accrued management compensation |
|
|
| |||
|
| Net Cash Provided by (Used in) Operating Activities |
|
|
| |||
INVESTING ACTIVITIES |
|
|
|
|
| |||
|
| Purchase of fixed assets |
| ( |
|
| ||
|
| Net Cash Used in Investing Activities |
| ( |
|
| ||
FINANCING ACTIVITIES |
|
|
|
|
| |||
| Proceeds from related party payable |
|
|
| ||||
|
| Net Cash Provided by Financing Activities |
|
|
| |||
|
|
|
|
|
|
|
| |
|
| NET CHANGE IN CASH |
|
|
| |||
|
| CASH AT BEGINNING OF YEAR |
|
|
| |||
|
| CASH AT END OF YEAR | $ |
| $ | |||
SUPPLEMENTAL DISCLOSURES OF CASH FLOWS |
|
|
|
|
| |||
| CASH PAID FOR: |
|
|
|
|
| ||
|
| Interest | $ |
| $ | |||
|
| Income taxes | $ |
| $ | |||
|
|
|
|
|
|
| ||
The accompanying notes are an integral part of these financial statements. | ||||||||
Page F-5
OMNITEK ENGINEERING CORP.
Statements of Stockholders’ Deficit
|
|
|
|
| Additional |
|
|
|
| Total | ||
| Common Stock | Paid-In |
| Accumulated |
| Stockholders' | ||||||
Shares |
| Amount | Capital |
| Deficit |
| Deficit | |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
Balance, December 31, 2022 |
| $ | $ |
| $ | ( |
| $ | ( | |||
|
|
|
|
|
|
|
|
|
|
|
|
|
Value of options and warrants |
|
|
|
|
|
|
|
|
|
|
|
|
issued for services |
|
|
|
|
|
|
| |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
Net income for the year ended |
|
|
|
|
|
|
|
|
|
|
|
|
December 31, 2023 |
|
|
|
|
| ( |
|
| ( | |||
|
|
|
|
|
|
|
|
|
|
|
|
|
Balance, December 31, 2023 |
| $ | $ |
| $ | ( |
| $ | ( | |||
|
|
|
|
|
|
|
|
|
|
|
|
|
Value of options and warrants |
|
|
|
|
|
|
|
|
|
|
|
|
issued for services |
|
|
|
|
|
|
| |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
Net income for the year ended |
|
|
|
|
|
|
|
|
|
|
|
|
December 31, 2024 |
|
|
|
|
| ( |
|
| ( | |||
|
|
|
|
|
|
|
|
|
|
|
|
|
Balance, December 31, 2024 |
| $ | $ |
| $ | ( |
| $ | ( | |||
The accompanying notes are an integral part of these financial statements. | ||||||||||||
Page F-6
OMNITEK ENGINEERING CORP.
Notes to Financial Statements
December 31, 2024, and 2023
NOTE 1 – ORGANIZATION AND BUSINESS ACTIVITY
Omnitek Engineering, Corp. (“Omnitek” or “the Company”) was incorporated on October 9, 2001 under the laws of the State of California. Omnitek develops and sells proprietary technology to convert diesel engines to an alternative fuel, new alternative fuel engines, and complementary products. Omnitek products are available for stationary applications and the global transportation markets – including light commercial vehicles, buses, heavy-duty trucks, as well as rail and marine applications. The technology can be applied for compressed natural gas (“CNG”), liquefied natural gas (“LNG”), renewable natural gas (“Biogas” or “RNG”), or Hydrogen (“H2”), as well as liquid petroleum gas (“Propane” or LPG”). Omnitek began operations on October 10, 2001, and was a spin-off from Nology Engineering, Inc.
NOTE 2 – SUMMARY OF SIGNIFICANT ACCOUNTING POLICIES
a. Accounting Methods
The Company's financial statements are prepared using the accrual method of accounting. The Company has elected a December 31, year-end.
b. Use of Estimates in Preparing Financial Statements
The preparation of financial statements in conformity with generally accepted accounting principles requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the financial statements and the reported amounts of revenues and expenses during the reporting period. Actual results could differ from those estimates. The Company also regularly evaluates estimates and assumptions related to deferred income tax asset valuation allowances, inventory valuation allowances, allowance for doubtful receivables and valuations of equity-based payments.
c. Cash and Cash Equivalents
For purposes of the statements of cash flows, the Company considers all highly liquid debt instruments purchased with a maturity of three months or less to be cash equivalents.
d. Accounts Receivable
Trade receivables are carried at original invoice amount less an estimate made for doubtful receivables based on a review of all outstanding amounts on a monthly basis. Management determines the allowance for doubtful accounts by identifying troubled accounts and by using historical experience applied to an aging of accounts. Trade receivables are written off when deemed uncollectible. Recoveries of trade receivables previously written off are recorded when received. Allowance for doubtful accounts for the years ended December 31, 2024, and 2023, was $
e. Inventories
Inventories are stated at the lower of net realizable value, or average cost basis. The Company reviews inventories on hand at least annually and records provisions for estimated excess, slow moving and obsolete inventory, as well as inventory with a carrying value in excess of net realizable value. The regular and systematic inventory valuation reviews include a current assessment of future product demand, historical experience and product expiration.
Accordingly, the Company has established an allowance for the cost of such obsolete inventory.
f. Long-Lived Assets
The Company assesses the recoverability of its long-lived assets annually and whenever circumstances indicate that there may be an impairment. The Company compares the estimated undiscounted future cash flows to the carrying
Page F-7
OMNITEK ENGINEERING CORP.
Notes to Financial Statements
December 31, 2024, and 2023
NOTE 2 – SUMMARY OF SIGNIFICANT ACCOUNTING POLICIES (continued)
value of the long-lived assets to determine if impairment has occurred. In the event that impairment has occurred, the Company recognize the impairment immediately. No impairment expense was recognized as of December 31, 2024, or 2023.
g. Property and Equipment
Property and equipment are recorded at cost. Depreciation and amortization are calculated on the straight-line method over the shorter of the lease term or the estimated useful lives of the assets ranging from three- to- five years.
h. Revenue Recognition
In general, revenue is recognized when control of the promised goods is transferred to our customers, in an amount that reflects the consideration to which we expect to be entitled in exchange for the goods or services. In order to achieve that core principle, a five-step approach is applied: (1) identify the contract with a customer, (2) identify the performance obligations in the contract, (3) determine the transaction price, (4) allocate the transaction price to the performance obligations in the contract, and (5) recognize revenue allocated to each performance obligation when we satisfy the performance obligation. A performance obligation is a promise in a contract to transfer a distinct good or service to the customer and is the unit of account for revenue recognition.
Performance Obligations
A performance obligation is a promise in a contract to transfer a distinct good or service to a customer and is the unit of account in the new revenue standard. The contract transaction price is allocated to each distinct performance obligation and recognized as revenue when, or as, the performance obligation is satisfied. The majority of Omnitek’s contracts have a single performance obligation as the promise to transfer the individual goods or services is not separately identifiable from other promises in the contracts and, therefore, not distinct.
Performance Obligations Satisfied at a Point in Time
Revenue from product sales is recognized at a point in time. These sales predominantly contain a single delivery element and revenue is recognized at a single point in time when ownership, risk and rewards transfer Upon fulfilment of the performance obligation, the customer is provided an invoice demonstrating transfer of control to the customer. Revenue from goods and services transferred to customers at a point in time accounted for 100% and 100% of revenue for the years ended December 31, 2024, and 2023, respectively.
We recognize revenue on various products and services as follows:
Products - The Company recognizes revenue from the sale of products as performance obligations are satisfied. Those sales predominantly contain a single delivery element and revenue is recognized at a single point in time when ownership and risks transfer (i.e. the performance obligation has been satisfied). In general, ownership and risk passes FOB shipping point, or as negotiated.
Assurance-type warranties are the only warranties provided by the Company and, as such, Omnitek does not recognize revenue on warranty-related work. Omnitek generally provides a one-year warranty for products that it sells. Warranty claims historically have been insignificant.
Page F-8
OMNITEK ENGINEERING CORP.
Notes to Financial Statements
December 31, 2024, and 2023
NOTE 2 – SUMMARY OF SIGNIFICANT ACCOUNTING POLICIES (continued)
Disaggregation of Revenue
The following table presents Omnitek’s revenues disaggregated by region and product type:
|
|
| December 31, |
|
| December 31, | ||||
|
|
|
| 2024 |
|
|
|
| 2023 |
|
|
|
| Consumer | Long-term |
|
|
| Consumer | Long-term |
|
Segments |
|
| Products | Contract | Total |
|
| Products | Contract | Total |
Domestic |
| $ |
| $ | ||||||
International |
|
|
|
|
|
| ||||
| $ |
|
| $ |
| |||||
|
|
|
|
|
|
|
|
|
|
|
Filters |
|
|
|
| ||||||
Components |
|
|
|
| ||||||
Engineering Services |
|
|
|
|
|
| ||||
| $ |
|
| $ |
| |||||
i. Cost of Goods Sold
The Company includes product costs (i.e., material, direct labor and overhead costs), shipping and handling expense, production-related depreciation expense and product license agreement expense in cost of goods sold.
j. Research and Development
The Company expenses the costs for research and development during the period incurred. During the years ended December 31, 2024, and 2023, the Company incurred research and development expenses of $
k. Advertising
The Company follows the policy of charging the costs of advertising to expense as incurred. During the years ended December 31, 2024, and 2023, the Company expensed $-
l. Provision for Income Taxes
The Company accounts for income taxes in accordance with Accounting Standards Codification Topic 740, Income Taxes ("Topic 740"), which requires the recognition of deferred tax liabilities and assets at currently enacted tax rates for the expected future tax consequences of events that have been included in the financial statements or tax returns. A valuation allowance is recognized to reduce the net deferred tax asset to an amount that is more likely than not to be realized. Topic 740 provides guidance on the accounting for uncertainty in income taxes recognized in a company's financial statements. Topic 740 requires a company to determine whether it is more likely than not that a tax position will be sustained upon examination based upon the technical merits of the position. If the more likely-than-not threshold is met, a company must measure the tax position to determine the amount to recognize in the financial statements.
The Company includes interest and penalties arising from the underpayment of income taxes in the statements of operations in the provision for income taxes. As of December 31, 2024, the Company had no accrued interest or penalties related to uncertain tax positions. The Company files an income tax return in the U.S. federal jurisdiction and the state of California. With few exceptions, the Company is no longer subject to U.S. federal, state, and local, or non-U.S. income tax examinations by tax authorities for years before 2012.
Page F-9
OMNITEK ENGINEERING CORP.
Notes to Financial Statements
December 31, 2024, and 2023
NOTE 2 – SUMMARY OF SIGNIFICANT ACCOUNTING POLICIES (continued)
m. Basic and Diluted Loss Per Share
The computation of basic earnings per share of common stock is based on the weighted average number of shares outstanding during the periods presented. The computation of fully diluted earnings per share includes common stock equivalents outstanding at the balance sheet date. The Company had
n. Fair Value Measurements
The fair value of a financial instrument is the amount that could be received upon the sale of an asset or paid to transfer a liability in an orderly transaction between market participants at the measurement date. Financial assets are marked to bid prices and financial liabilities are marked to offer prices. Fair value measurements do not include transaction costs. A fair value hierarchy is used to prioritize the quality and reliability of the information used to determine fair values. Categorization within the fair value hierarchy is based on the lowest level of input that is significant to the fair value measurement. The fair value hierarchy is defined into the following three categories:
Level 1 – Quoted prices in active markets for identical assets or liabilities;
Level 2 – Inputs other than quoted prices included within Level 1 that are either directly or indirectly observable; and
Level 3 – Unobservable inputs that are supported by little or no market activity, therefore requiring an entity to develop its own assumptions about the assumptions that market participants would use in pricing.
o. Stock-based Compensation
The Company recognizes compensation expense for stock-based awards expected to vest on a straight-line basis over the requisite service period of the award based on their grant date fair value. The Company estimates the fair value of stock options using a Black-Scholes option pricing model which requires management to make estimates for certain assumptions regarding risk-free interest rate, expected life of options, expected volatility of stock and expected dividend yield of stock.
p. Concentration of Risks
Customers
During the year ended December 31, 2024,
During the year ended December 31, 2023,
Suppliers
During the year ended December 31, 2024,
During the year ended December 31, 2023,
q. Liquidity and Going Concern
Historically, the Company has incurred net losses and positive cash flows from operations. As of December 31, 2024, the Company had an accumulated deficit of $
Page F-10
OMNITEK ENGINEERING CORP.
Notes to Financial Statements
December 31, 2024, and 2023
NOTE 2 – SUMMARY OF SIGNIFICANT ACCOUNTING POLICIES (continued)
plan, the projected sales for 2025, combined with funds available from its working capital, will be sufficient to fund operations for the next twelve months from the date these financial statements were issued. However, there can be no assurance that operations and operating cash flows will continue at the current levels or improve in the near future. Whether, and when, the Company can attain profitability and positive cash flows from operations is uncertain. The Company is also uncertain whether it can raise additional capital. These uncertainties cast substantial doubt upon the Company’s ability to continue as a going concern for a period of one year from the issuance of these financial statements. Our financial statements have been prepared on a going concern basis, which assumes the realization of assets and liquidation of liabilities in the normal course of operations. The financial statements do not include any adjustments relating to the recoverability or classification of recorded asset amounts or the amounts or classification of liabilities should we be unable to continue as a going concern.
r. Recent Accounting Pronouncements
The Company has evaluated recent accounting pronouncements, and their adoption has not had or is not expected to have a material impact on the Company’s financial position, or statements.
In November 2023, the FASB issued ASU 2023-07, "Segment Reporting (Topic 280): Improvements to Reportable Segment Disclosures", which amends the disclosure to improve reportable segment disclosure requirements, primarily through enhanced disclosures about significant segment expenses on an annual and interim basis for to enable investors to develop more decision-useful financial analyses. All public entities will be required to report segment information in accordance with the new guidance starting in annual periods beginning after December 15, 2023. The Company is currently assessing potential impacts of ASU 2023-06 and does not expect the adoption of this guidance will have a material impact on its financial statements and disclosures.
In December 2023, the FASB issued ASU 2023-09, " Income Taxes (Topic 740): Improvements to Income Tax Disclosures", which amends the disclosure to address investor requests for more transparency about income tax information through improvements to income tax disclosures primarily related to the rate reconciliation and income taxes paid information and includes certain other amendments to improve the effectiveness of income tax disclosures. For entities other than public business entities, the requirements will be effective for annual periods beginning after December 15, 2025. The guidance will be applied on a prospective basis with the option to apply the standard retrospectively. Early adoption is permitted. The Company is currently assessing potential impacts of ASU 2023-09 and does not expect the adoption of this guidance will have a material impact on its financial statements and disclosures and the Company is in a loss position and not incurring any tax expenses.
NOTE 3 – CUSTOMER DEPOSITS
The customers deposit account relates to payments received from customers before product has been shipped. When the product is shipped the Company recognizes the associated revenue by reclassifying the customer deposit to the appropriate revenue account. For the periods ended December 31, 2024 and December 31, 2023, the balance due under customer deposits was $
NOTE 4 – CONTRACT ASSETS AND LIABILITIES
Contract Balances
The timing of revenue recognition, billings and cash collections results in billed accounts receivable and costs and estimated earnings in excess of billings on uncompleted contracts (contract assets) on the balance sheet. For Omnitek’s long-term contracts, amounts are generally billed as work progresses in accordance with agreed-upon contractual terms. As of December 31, 2024, the company had no long-term contract liabilities.
Page F-11
OMNITEK ENGINEERING CORP.
Notes to Financial Statements
December 31, 2024, and 2023
NOTE 5 – OPERATING LEASE
The Company’s lease consists of an operating lease for general office space and warehouse facilities. The Company recognizes rent expense for this lease on a straight-line basis over the lease term. Because the lease does not provide an implicit interest rate, the Company uses its incremental borrowing rate based on the information available at the lease Commencement Date in determining the present value of future lease payments.
On June 3, 2021, the Company entered into a lease for the premises located at 1345 Specialty Drive #E, Vista, CA, containing approximately 11,751 square feet of rentable area. The lease commenced on July 1, 2021, and expires on June 30, 2026. The monthly base rent under the lease is $
During the year ended December 31, 2024, cash paid for amounts included in the measurement of operating lease liabilities was $
Supplemental balance sheet information related to leases as of December 31, 2024 was as follows:
Operating leases: |
|
|
|
|
|
Operating lease right-of-use-assets |
|
|
|
| |
Operating lease liabilities - current |
|
|
|
| |
Operating lease liabilities – long-term |
|
|
|
| |
Incremental borrowing rate: |
|
|
|
|
|
Operating leases |
|
|
|
|
As of December 31, 2024, maturities of operating lease liabilities were as follows:
Years ending December 31, |
|
|
| ||
|
|
|
|
|
|
2025 |
|
|
|
| |
Thereafter |
|
|
|
| |
Total lease payments |
|
|
|
| |
Less: Imputed interest |
|
|
|
| ( |
Total lease liability |
|
|
|
| |
Less: current lease liability |
|
|
|
| ( |
Long-term lease liability |
|
|
| $ | |
Page F-12
OMNITEK ENGINEERING CORP.
Notes to Financial Statements
December 31, 2024, and 2023
NOTE 6 – INVENTORIES
Inventories are located in Vista, California and at December 31, 2024, and 2023, consisted of the following:
| December 31, |
| December 31, | ||
2024 |
| 2023 | |||
Raw materials | $ |
| $ | ||
Finished goods |
|
|
| ||
Total | $ |
| $ | ||
Allowance for obsolete inventory |
|
|
|
|
|
Opening allowance |
|
|
| ||
Allowance/(Reversal) for the Year |
|
|
| ( | |
Closing allowance |
|
|
| ||
Total | $ |
| $ | ||
The Company has established an allowance for obsolete inventory. The net change in obsolete inventory has an increase of $
NOTE 7 – PROPERTY AND EQUIPMENT
Property and equipment at December, 2024, and 2023, consisted of the following:
| December 31, |
| December 31, | ||
2024 |
| 2023 | |||
Production/Office equipment | $ |
| $ | ||
Leasehold Improvements |
|
|
| ||
Less: accumulated depreciation |
| ( |
|
| ( |
Total | $ |
| $ | ||
Depreciation expense for the years ended December 31, 2024, and 2023, was $
Page F-13
OMNITEK ENGINEERING CORP.
Notes to Financial Statements
December 31, 2024, and 2023
NOTE 8 – NOTES PAYABLE – RELATED PARTIES
Convertible Notes – Related Parties
On June 4, 2021, the Company issued an unsecured convertible promissory note for $
On June 4, 2021, the Company issued a convertible promissory note for $
As of December 31, 2024, and December 31, 2023, Convertible Notes – Related Party consisted of the following:
| December 31, 2024 |
| December 31, 2023 | ||||
Convertible Notes payable, related parties |
| $ | |
|
| $ | |
Less current portion |
|
| ( |
|
|
| ( |
Total |
| $ | |
|
|
| |
Notes Payable – Related Party
On January 19, 2017, the Company issued a promissory note for $
On March 23, 2023, the Company issued a Working Capital Promissory Note, in favor of its CEO, evidencing the additional loans to the Company by the CEO, with an Initial Principal Balance of $20,000, and to evidence any future additional loans by the CEO to the Company thereafter. Pursuant to the terms of the note, the unpaid principal and accrued simple interest at the rate of 8.0% per annum (“Applicable Rate”) shall be due and payable on or before March 22, 2024, (the “Maturity Date”). The principal amount of the note shall be increased by the amount of any additional advances of funds made by the CEO to the Company, from time-to-time, with interest thereon at the applicable Rate, from the date of such advance. On March 22, 2024 the Maturity Date of the Working Capital Promissory Note was extended to March 23, 2026.
Page F-14
OMNITEK ENGINEERING CORP.
Notes to Financial Statements
December 31, 2024, and 2023
NOTE 8 – NOTES PAYABLE – RELATED PARTIES (continued)
As of December 31, 2024, and December 31, 2023 Note Payable – Related Party consisted of the following:
| December 31, 2024 |
| December 31, 2023 | ||||
Note payable, related party |
| $ |
|
| $ | ||
Total |
| $ |
|
| $ | ||
NOTE 9 – DEBT
Loans payable – SBA Economic Injury Disaster Loan
On April 21, 2020, the Company obtained a loan (the “SBA EIDL Loan”) under the Coronavirus Aid, Relief, and Economic Security Act (“CARES Act”) adminitstered by the U.S. Small Business Administration. The Company received total proceeds of $
As of December 31, 2024, and December 31, 2023, Debt consisted of the following:
| December 31, |
| December 31, | ||
2024 |
| 2023 | |||
Loan payable – SBA EIDL | $ |
| $ | ||
Less current portion |
|
|
| ||
Total | $ |
| $ | ||
As of December 31, 2024 accrued interest was $9,436.
NOTE 10 – COMMITMENTS
As of December 31, 2024, and 2023, the Company had outstanding purchase commitments for inventory totaling $
NOTE 11 – RELATED PARTY TRANSACTIONS
Accounts Payable – Related Parties
The Company regularly incurs expenses that are paid to related parties for purchases of goods and services from related parties. As of December 31, 2024, and December 31, 2023, the Company owed board members for such goods and services $
Page F-15
OMNITEK ENGINEERING CORP.
Notes to Financial Statements
December 31, 2024, and 2023
NOTE 11 – RELATED PARTY TRANSACTIONS (continued)
Accounts Receivable – Related Parties
As of December 31, 2024, and December 31, 2023, the Company was owed $
Accrued Management Expenses
During the periods ended December 31, 2024, and December 31, 2023, the Company’s president was due amounts for services performed for the Company. As of December 31, 2024, and December 31, 2023 the accrued management fees consisted of the following:
December 31, 2024 |
| December 31, 2023 | |||
Amounts due to the president | $ |
| $ | ||
Total | $ |
| $ | ||
NOTE 12 – STOCKHOLDERS’ EQUITY
Options and Warrants
The Company has no warrants outstanding.
On April 14, 2023, options to purchase
On February 9, 2024, options to purchase 855,556 shares of common stock expired.
During the years ended December 31, 2024, and 2023, the Company granted
On September 11, 2015, the Board of Directors adopted the Omnitek Engineering Corp. 2015, Long Term Incentive Plan (the “2015 Plan”), under which
On October 2017, the Company’s shareholders approved its 2017 Long-Term Incentive Plan (the “2017 Plan”). Under the 2017 plan, the Company may issue up to
The Company recognizes compensation expense for stock-based awards expected to vest on a straight-line basis over the requisite service period of the award based on their grant date fair value. The Company estimates the fair value of stock options using a Black-Scholes option pricing model which requires management to make estimates for certain assumptions regarding risk-free interest rate, expected life of options, expected volatility of stock and expected dividend yield of stock. When determining expected volatility, the Company considers the historical performance of the Company’s stock, as well as implied volatility. The risk-free interest rate is based on the U.S. Treasury yield curve in effect at the time of grant, based on the options’ expected term. The expected term of the options is based on the Company’s evaluation of option holders’ exercise patterns and represents the period of time that options are expected to remain unexercised. The Company uses historical data to estimate the timing and amount of forfeitures.
Page F-16
OMNITEK ENGINEERING CORP.
Notes to Financial Statements
December 31, 2024, and 2023
NOTE 12 – STOCKHOLDERS’ EQUITY (continued)
The following table presents the assumptions used to estimate the fair values of the stock options granted:
December 31, 2024 |
| December 31, 2023 | |
Expected volatility |
| ||
Expected dividends |
| ||
Expected term |
| ||
Risk-free interest rate |
|
A summary of the status of the options granted at December 31, 2024 and December 31, 2023 and changes during the years then ended is presented below:
| December 31, 2024 |
| December 31, 2023 | ||||||
|
|
|
| Weighted-Average |
|
|
|
| Weighted-Average |
| Shares |
|
| Exercise Price |
| Shares |
|
| Exercise Price |
Outstanding at beginning of year |
| $ |
|
| $ | ||||
Granted |
|
|
|
|
| ||||
Exercised |
|
|
|
|
| ||||
Expired or cancelled | ( |
|
|
| ( |
|
| ||
Outstanding at end of year |
|
|
|
|
| ||||
Exercisable |
| $ |
|
| $ | ||||
A summary of the status of the options outstanding at December 31, 2024 is presented below:
Range of Exercise Prices |
| Number Outstanding |
| Weighted-Average Remaining Contractual Life |
| Number Exercisable |
| Weighted-Average Exercise Price |
$ |
|
|
|
| $ |
A summary of the status of the options outstanding at December 31, 2023 is presented below:
Range of Exercise Prices |
| Number Outstanding |
| Weighted-Average Remaining Contractual Life |
| Number Exercisable |
| Weighted-Average Exercise Price |
$ |
|
|
|
| $ |
Page F-17
OMNITEK ENGINEERING CORP.
Notes to Financial Statements
December 31, 2024, and 2023
NOTE 13 – INCOME TAXES
The provision for income taxes for the year ended December 31, 2024 and 2023 consists of the following:
|
| December 31, |
| December 31, | ||
| 2024 |
| 2023 | |||
Federal |
|
|
|
| ||
Current |
| $ |
| $ | ||
Deferred |
|
|
|
| ||
State |
|
|
|
|
|
|
Current |
| $ |
| $ | ||
Deferred |
|
|
|
| ||
Income tax expense |
| $ |
| $ | ||
Net deferred tax assets consist of the following components as of December 31, 2024, and 2023:
|
| December 31, |
| December 31, |
| ||
| 2024 |
| 2023 |
| |||
Deferred tax assets: |
|
|
|
|
| ||
Net operating loss carryover |
| $ |
| $ |
| ||
Research and development carry forward |
|
|
|
|
| ||
Inventory reserve |
|
|
|
|
| ||
Allowance for doubtful accounts |
|
|
|
|
| ||
Warranty allowance |
|
|
|
|
| ||
Accrued compensation |
|
|
|
|
| ||
Deferred tax liabilities: |
|
|
|
|
|
|
|
Depreciation |
|
| ( |
|
| ( |
|
Valuation allowance |
|
| ( |
|
| ( |
|
Net deferred tax asset |
| $ |
| $ |
| ||
The income tax provision differs from the amount of income tax determined by applying the estimated U.S. federal and state income tax rate of
|
| December 31, |
| December 31, | ||
|
| 2024 |
|
| 2023 | |
Book income (loss) |
| $ | ( |
| $ | ( |
Meals and entertainment |
|
|
|
| ||
State tax deduction |
|
|
|
| ||
Deferred rent |
|
|
|
| ||
Stock/Options for services |
|
|
|
| ||
Officer’s life ins premium |
|
|
|
| ||
Depreciation |
|
|
|
| ||
Accrued compensation |
|
|
|
| ||
Inventory reserve |
|
|
|
| ( | |
Valuation allowance |
|
|
|
| ||
Net operating of carryover |
|
| ( |
|
| ( |
Income Tax Expense |
| $ |
| $ | ||
On December 21, 2017, the TCJA was enacted. Among other things, the TCJA reduces the U.S. federal corporate tax rate from 35 percent to 21 percent beginning January 1, 2018, requires companies to pay a one-time transition tax on certain previously unremitted earnings on non-U.S. subsidiaries, creates new taxes on certain foreign sourced earnings and imposes additional limitations on certain deductions, including interest expense and net operating losses arising after 2017. The Company has assessed the impact of the TCJA and is not subject to the one-time
Page F-18
OMNITEK ENGINEERING CORP.
Notes to Financial Statements
December 31, 2024, and 2023
NOTE 13 – INCOME TAXES (continued)
transition tax. The Company remeasured certain deferred tax assets and liabilities based on the rates that they are expected to reverse in the future, which is generally 21 percent under TCJA. The decrease in the Company’s net deferred tax assets was offset by a corresponding decrease in its valuation allowance.
At December 31, 2024, the Company had net operating loss carry forwards of approximately $
NOTE 14 – CONTINGENT LIABILITY
On September 16, 2022 the Company received a Summons and was named as a cross-defendant in the matter of Olson-Ecologic Engine Testing Laboratories, LLC -v- Michael Naylor, Omnitek Engineering Corp., and Moto Concerto, Inc., filed in the Superior Court of the State of California, County of Orange, Central Justice Center, Case No. 30-2020-01171344. Olson-Ecologic Engine Testing Laboratories, LLC filed the cross-complaint in response to the original complaint filed by Michael Naylor against Olson-Ecologic Engine Testing Laboratories. Omnitek served as a subcontractor to Olson-Ecologic who received a grant in May 2017 from the California Energy Commission. In October 2017, very early in the project and before completion of the project, which was to run into 2020, Olson-Ecologic advised Omnitek that the California Energy Commission had terminated the project. In the cross-complaint Olson-Ecologic alleges that Omnitek participated with Mr. Naylor in overcharging Olson-Ecologic, however, Olson-Ecologic does not provide a specific statement of facts or actions of what Omnitek allegedly did. Olson-Ecologic’s cross-complaint and allegations against Omnitek are without merit and Omnitek will vigorously defend the cross-complaint. As of the time of this report there are no material developments. The trial date is set for December 8, 2025.
NOTE 15 – SUBSEQUENT EVENTS
None
Page F-19
Exhibit 31(i)
CERTIFICATION OF PRINCIPAL EXECUTIVE OFFICER PURSUANT TO RULE 13a-14
I, Werner Funk, certify that:
1. I have reviewed this Annual Report on Form 10-K of Omnitek Engineering Corp.;
2.Based on my knowledge, this report does not contain any untrue statement of a material fact or omit to state a material fact necessary to make the statements made, in light of the circumstances under which such statements were made, not misleading with respect to the period covered by this report;
3. Based on my knowledge, the financial statements, and other financial information included in this report, fairly present in all material respects the financial condition, results of operations and cash flows of the registrant as of, and for, the periods presented in this report;
4. I am responsible for establishing and maintaining disclosure controls and procedures (as defined in Exchange Act Rules 13a-15(e) and 15d-15(e)) and internal control over financial reporting (as defined in Exchange Act Rules 13a-15(f) and 15d-15(f)) for the small business issuer and have, for the small business issuer and have:
(a) Designed such disclosure controls and procedures, or caused such disclosure controls and procedures to be designed under my supervision, to ensure that material information relating to the small business issuer, including its consolidated subsidiary, is made known to us by others within those entities, particularly during the period in which this report is being prepared;
(b) Designed such internal control over financial reporting, or caused such internal control over financial reporting to be designed under our supervision, to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles;
(c) Evaluated the effectiveness of the small business issuer’s disclosure controls and procedures and presented in this report our conclusions about the effectiveness of the disclosure controls and procedures, as of the end of the period covered by this report based on such evaluation; and
(d) Disclosed in this report any change in the small business issuer’s internal control over financial reporting that occurred during the small business issuer’s most recent fiscal quarter that has materially affected, or is reasonably likely to materially affect, the small business issuer’s internal control over financial reporting; and
5.I have disclosed, based on my most recent evaluation of internal control over financial reporting, to the small business issuer’s auditors and the audit committee of the small business issuer’s board of directors (or persons performing the equivalent functions):
(a) All significant deficiencies and material weaknesses in the design or operation of internal control over financial reporting which are reasonably likely to adversely affect the small business issuer’s ability to record, process, summarize and report financial information; and
(b) Any fraud, whether or not material, that involves management or other employees who have a significant role in the small business issuer’s internal control over financial reporting.
| |
Dated: April 15, 2025 | /s/ Werner Funk |
| By: Werner Funk |
| Its: President and Secretary |
Exhibit 31(ii)
CERTIFICATION OF PRINCIPAL FINANCIAL OFFICER PURSUANT TO RULE 13a-14
I, Werner Funk, certify that:
1.I have reviewed this Annual Report on Form 10-K of Omnitek Engineering Corp.;
2.Based on my knowledge, this report does not contain any untrue statement of a material fact or omit to state a material fact necessary to make the statements made, in light of the circumstances under which such statements were made, not misleading with respect to the period covered by this report;
3.Based on my knowledge, the financial statements, and other financial information included in this report, fairly present in all material respects the financial condition, results of operations and cash flows of the registrant as of, and for, the periods presented in this report;
4.I am responsible for establishing and maintaining disclosure controls and procedures (as defined in Exchange Act Rules 13a-15(e) and 15d-15(e)) and internal control over financial reporting (as defined in Exchange Act Rules 13a-15(f) and 15d-15(f)) for the small business issuer and have, for the small business issuer and have:
(a) Designed such disclosure controls and procedures, or caused such disclosure controls and procedures to be designed under my supervision, to ensure that material information relating to the small business issuer, including its consolidated subsidiary, is made known to us by others within those entities, particularly during the period in which this report is being prepared;
(b) Designed such internal control over financial reporting, or caused such internal control over financial reporting to be designed under our supervision, to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles;
(c) Evaluated the effectiveness of the small business issuer’s disclosure controls and procedures and presented in this report our conclusions about the effectiveness of the disclosure controls and procedures, as of the end of the period covered by this report based on such evaluation; and,
(d) Disclosed in this report any change in the small business issuer’s internal control over financial reporting that occurred during the small business issuer’s most recent fiscal quarter that has materially affected, or is reasonably likely to materially affect, the small business issuer’s internal control over financial reporting; and,
5.I have disclosed, based on my most recent evaluation of internal control over financial reporting, to the small business issuer’s auditors and the audit committee of the small business issuer’s board of directors (or persons performing the equivalent functions):
(a)All significant deficiencies and material weaknesses in the design or operation of internal control over financial reporting which are reasonably likely to adversely affect the small business issuer’s ability to record, process, summarize and report financial information; and,
(b) Any fraud, whether or not material, that involves management or other employees who have a significant role in the small business issuer’s internal control over financial reporting.
| |
Dated: April 15, 2025 | /s/ Werner Funk |
| By: Werner Funk |
| Its: Chief Financial Officer |
Exhibit 32
CERTIFICATION PURSUANT TO
18 U.S.C. SECTION 1350
AS ADOPTED PURSUANT TO
SECTION 906 OF THE SARBANES-OXLEY ACT OF 2002
In connection with the Annual Report of Omnitek Engineering Corp. (the “Company”) on Form 10-K for the period ending December 31, 2024, as filed with the Securities and Exchange Commission on the date hereof (the “Report”), I, Werner Funk, Chief Executive Officer and Chief Financial Officer of the Company, certify, pursuant to 18 U.S.C. Sec. 1350, as adopted pursuant to Sec. 906 of the Sarbanes-Oxley Act of 2002, that, to the best of my knowledge and belief:
(1)The Report fully complies with the requirements of section 13(a) or 15(d) of the Securities Exchange Act of 1934; and
(2)The information contained in the Report fairly presents, in all material respects, the financial condition and result of operations of the Company.
|
|
Dated: April 15, 2025 | /s/ Werner Funk |
| By: Werner Funk |
| Its: Chief Executive Officer, |
| President and Secretary |
|
|
|
|
Dated: April 15, 2025 | /s/ Werner Funk |
| By: Werner Funk |
| Its: Chief Financial Officer |
A signed original of this written statement required by Section 906, or other document authenticating, acknowledging, or otherwise adopting the signature that appears in typed form within the electronic version of this written statement has been provided to the Company and will be retained by the Company and furnished to the Securities and Exchange Commission or its staff upon request.