ABAT 8-K
AMERICAN BATTERY TECHNOLOGY Co (ABAT)
UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549
FORM
CURRENT REPORT
PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
Date
of Report (Date of earliest event reported):
| (Exact name of registrant as specified in its charter) |
| (State or other jurisdiction of | (Commission | (IRS Employer | ||
| incorporation or organization) | File No.) | Identification Number) |
| (Address of principal executive offices) | (Zip Code) |
(Registrant’s telephone number including area code)
N/A
(Former name or former address, if changed since last report)
Check the appropriate box below if the Form 8-K filing is intended to simultaneously satisfy the filing obligation of the registrant under any of the following provisions (see General Instruction A.2. below):
| Written communications pursuant to Rule 425 under the Securities Act (17 CFR 230.425) | |
| Soliciting material pursuant to Rule 14a-12 under the Exchange Act (17 CFR 240.14a-12) | |
| Pre-commencement communications pursuant to Rule 14d-2(b) under the Exchange Act (17 CFR 240.14d-2(b)) | |
| Pre-commencement communications pursuant to Rule 13e-4(c) under the Exchange Act (17 CFR 240.13e-4(c)) |
Securities registered pursuant to Section 12(b) of the Act:
| Title of Each Class | Trading Symbol(s) | Name of Each Exchange on Which Registered | ||
Indicate by check mark whether the registrant is an emerging growth company as defined in Rule 405 of the Securities Act of 1933 (§230.405 of this chapter) or Rule 12b-2 of the Securities Exchange Act of 1934 (§240.12b-2 of this chapter).
Emerging
growth company
If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐
Item 8.01 Other Events.
On April 24, 2024, American Battery Technology Company (“Company”) issued a press release announcing the completion of the “Amended Resource Estimate and Initial Assessment with Project Economics for the Tonopah Flats Lithium Project, Esmeralda and Nye Counties, Nevada, USA” (“Amended IA”) and the publication of the S-K 1300 Technical Report Summary (“TRS”) disclosing mineral resources, including an initial economic assessment, for the Tonopah Flats Lithium Project. The TRS was completed by RESPEC Company LLC, a qualified person, in compliance with Item 1300 of Regulation S-K and with an effective date of April 5, 2024.
A copy of the press release is attached hereto as Exhibit 99.1 to this Current Report on Form 8-K and is incorporated herein by reference. The final version of the Amended IA is filed as Exhibit 96.1 and the qualified person consent is filed as Exhibit 23.1 to this Current Report on Form 8-K, each of which are incorporated herein by reference.
Item 9.01 Financial Statements and Exhibits.
(d) Exhibits:
| Exhibit No. | Description | |
| 23.1 | Consent of RESPEC Company LLC | |
| 96.1 | Amended Resource Estimate and Initial Assessment with Project Economics for the Tonopah Flats Lithium Project, Esmeralda and Nye Counties, Nevada, USA | |
| 99.1 | Press Release Dated April 24, 2024 | |
| 104 | Cover Page Interactive Data File (formatted in Inline XBRL and included as Exhibit 101). |
SIGNATURES
Pursuant to the requirements of the Securities Exchange Act of 1934, as amended, the registrant has duly caused this report to be signed on its behalf by the undersigned hereunto duly authorized.
| AMERICAN BATTERY TECHNOLOGY COMPANY | ||
| Date: April 25, 2024 | By: | /s/ Ryan Melsert |
| Ryan Melsert | ||
| Chief Executive Officer | ||
Exhibit 23.1
Exhibit 96.1
Exhibit 99.1
American Battery Technology Company Publishes Updated Initial Assessment and Economic Analysis for its Tonopah Flats Lithium Project for One of the Largest Identified Lithium Resources in the U.S.
ABTC CEO leads virtual walkthrough of one of the largest known lithium deposits in the United States with Vrify CEO Stephen De Jong
Reno, Nev., April 24, 2024 — American Battery Technology Company (ABTC) (NASDAQ: ABAT), an integrated critical battery materials company that is commercializing its technologies for both primary battery minerals manufacturing and secondary minerals lithium-ion battery recycling, has published an amended Initial Assessment for its Tonopah Flats Lithium Project (TFLP).
The TFLP is one of the largest identified lithium resources in the U.S., and while initial pit designs and economic analyses in previous assessments evaluated the full resource, this updated Initial Assessment utilizes a commercialization pathway with a more rigorous mine plan that contemplates utilization of only Measured and Indicated Mineral Resources, and excludes Inferred Mineral Resources, to supply the planned commercial-scale lithium hydroxide monohydrate (LHM) refinery.
This commercialization pathway allows for an engineered phased development, with improved access to the higher quality portions of the resource, and at improved project economics. ABTC recently completed construction of its multi-ton per day integrated demonstration facility for the processing of its lithium-bearing claystone material into lithium products. Updated project metrics for ABTC’s TFLP resource utilizing its internally-developed and demonstrated processing technologies include:
| ● | While the prior Initial Assessments included Inferred Mineral Resources, which are more speculative, this most recent Initial Assessment details a commercialization plan where only Measured and Indicated Mineral Resources would be utilized to service the lithium hydroxide refinery | |
| ● | Total amount of claystone processed over life of mine reduced 7%, to 597 million tons | |
| ● | Average grade over life of mine increased by 8%, to 4,111 ppm LHM | |
| ● | Average production costs over life of mine decreased by 7%, to $4,302/ton LHM | |
| ● | Net present value at 10% discount rate (NPV-10) increased by 6%, to $4.67 billion |
ABTC published the TFLP Initial Assessment in December 2023 and updated it in January 2024. ABTC is publishing this Amended Resource Estimate and Initial Assessment with Project Economics for the Tonopah Flats Lithium Project, Esmeralda and Nye Counties, Nevada, USA (Amended Initial Assessment), that includes these changes and other updates. The Amended Initial Assessment remains preliminary in nature, and there is no certainty that this economic assessment will be realized. Mineral Resources, including Measured and Indicated Mineral Resources, are too speculative geologically to be considered Probable or Proven Reserves.
To describe and walkthrough this updated commercialization plan and project scale-up, ABTC CEO Ryan Melsert was interviewed by Vrify CEO Stephen De Jong to talk through these highlights with visual graphics of the TFLP and its related infrastructure.
The interview highlights:
| ● | Drill Program II location and assay results | |
| ● | Updated Drill Program III locations and assay results | |
| ● | ABTC’s lithium hydroxide pilot plant and commercial-scale refinery | |
| ● | Recommended next steps for the project |
To view the interview, click here.
To view the interactive 3D Model used during the interview, click here.
American Battery Technology Company’s Measured, Indicated, and Inferred Lithium Mineral Resource
Resource Classification | Total kTons | Average ppm Li | Li kTons | LHM kTons | ||||||||||||
| Measured | 721,000 | 702 | 510 | 3,060 | ||||||||||||
| Indicated | 2,439,000 | 565 | 1,380 | 8,340 | ||||||||||||
| Measured + Indicated | 3,160,000 | 596 | 1,890 | 11,400 | ||||||||||||
| Inferred | 2,931,000 | 550 | 1,610 | 9,750 | ||||||||||||
| Total | 6,091,000 | 574 | 3,500 | 21,150 | ||||||||||||
ABTC received support for the commercialization of these internally-developed technologies for the manufacturing of battery grade lithium hydroxide from Nevada-based claystone resources from an initial U.S. Department of Energy (DOE) grant toward the $4.5M construction and operation of a multi-ton per day integrated pilot plant, and from a second DOE grant toward the $115M construction and commissioning of the first phase of a commercial scale lithium hydroxide refinery.
The Amended Initial Assessment supersedes all previously published reports effective as of April 5, 2024. To read the full Amended Initial Assessment, view updated 3D interactive resource graphics, and learn more about the ABTC Tonopah Flats Lithium Project, visit: www.amerianbatterytechnology.com.
Qualified Person
The
mineral resource estimates presented in the ABTC Tonopah Flats Initial Assessment were performed by third-party, qualified person RESPEC,
LLC and were classified by geological and quantitative confidence in accordance with the Securities and Exchange Commission (SEC) Regulation
S-K 1300.
Initial Assessment
Initial Assessment is a preliminary technical and economic study of the economic potential of all or parts of mineralization to support the disclosure of mineral resources. The Initial Assessment must be prepared by a qualified person and must include appropriate assessments of reasonably assumed technical and economic factors, together with any other relevant operational factors, that are necessary to demonstrate at the time of reporting that there are reasonable prospects for economic extraction. An Initial Assessment is required for disclosure of mineral resources but cannot be used as the basis for disclosure of mineral reserves. An Initial Assessment is preliminary in nature and includes Inferred Mineral Resources that are considered too speculative geologically to have the economic considerations applied that would enable them to be classified as mineral reserves. There is no certainty that the economic results of an Initial Assessment will be realized.
Inferred Resource
Inferred Mineral Resource is that part of a mineral resource for which quantity and grade or quality are estimated on the basis of limited geological evidence and sampling. The level of geological uncertainty associated with an Inferred Mineral Resource is too high to apply relevant technical and economic factors likely to influence the prospects of economic extraction in a manner useful for evaluation of economic viability. Because an Inferred Mineral Resource has the lowest level of geological confidence of all mineral resources, which prevents the application of the modifying factors in a manner useful for evaluation of economic viability, an Inferred Mineral Resource may not be considered when assessing the economic viability of a mining project, and may not be converted to a mineral reserve.
Indicated Resource
Indicated Mineral Resource is that part of a mineral resource for which quantity and grade or quality are estimated on the basis of adequate geological evidence and sampling. The level of geological certainty associated with an Indicated Mineral Resource is sufficient to allow a qualified person to apply modifying factors in sufficient detail to support mine planning and evaluation of the economic viability of the deposit. Because an Indicated Mineral Resource has a lower level of confidence than the level of confidence of a Measured Mineral Resource, an Indicated Mineral Resource may only be converted to a Probable Mineral Reserve.
Measured Resource
Measured
Mineral Resource is that part of a mineral resource for which quantity and grade or quality are estimated on the basis of conclusive
geological evidence and sampling. The level of geological certainty associated with a Measured Mineral Resource is sufficient to allow
a qualified person to apply modifying factors, as defined in this section, in sufficient detail to support detailed mine planning and
final evaluation of the economic viability of the deposit. Because a Measured Mineral Resource has a higher level of confidence than
the level of confidence of either an Indicated Mineral Resource or an Inferred Mineral Resource, a Measured Mineral Resource may be converted
to a Proven Mineral Reserve or to a Probable Mineral Reserve.
Probable Mineral Reserve
Probable Mineral Reserve is the economically mineable part of an indicated and, in some cases, a Measured Mineral Resource.
Proven Mineral Reserve
Proven Mineral Reserve is the economically mineable part of a Measured Mineral Resource and can only result from conversion of a Measured Mineral Resource.
Pre-Feasibility Study
A Preliminary Feasibility Study (or Pre-Feasibility Study) is a comprehensive study of a range of options for the technical and economic viability of a mineral project that has advanced to a stage where a qualified person has determined (in the case of underground mining) a preferred mining method, or (in the case of surface mining) a pit configuration, and in all cases has determined an effective method of mineral processing and an effective plan to sell the product. A Pre-Feasibility Study includes a financial analysis based on reasonable assumptions, based on appropriate testing, about the modifying factors and the evaluation of any other relevant factors that are sufficient for a qualified person to determine if all or part of the Indicated and Measured Mineral Resources may be converted to mineral reserves at the time of reporting. The financial analysis must have the level of detail necessary to demonstrate, at the time of reporting, that extraction is economically viable. A Pre-Feasibility Study is less comprehensive and results in a lower confidence level than a feasibility study. A Pre-Feasibility study is more comprehensive and results in a higher confidence level than an Initial Assessment.
About American Battery Technology Company
American Battery Technology Company (ABTC), headquartered in Reno, Nevada, has pioneered first-of-kind technologies to unlock domestically manufactured and recycled battery metals critically needed to help meet the significant demand from the electric vehicle, stationary storage, and consumer electronics industries. Committed to a circular supply chain for battery metals, ABTC works to continually innovate and master new battery metals technologies that power a global transition to electrification and the future of sustainable energy.
Forward-Looking Statements
This press release contains “forward-looking statements” within the meaning of the safe harbor provisions of the U.S. Private Securities Litigation Reform Act of 1995. All statements, other than statements of historical fact, are “forward-looking statements.” Although the American Battery Technology Company’s (the “Company”) management believes that such forward-looking statements are reasonable, it cannot guarantee that such expectations are, or will be, correct. These forward-looking statements involve a number of risks and uncertainties, which could cause the Company’s future results to differ materially from those anticipated. Potential risks and uncertainties include, among others, risks and uncertainties related to the Company’s ability to continue as a going concern; interpretations or reinterpretations of geologic information, unfavorable exploration results, inability to obtain permits required for future exploration, development or production, general economic conditions and conditions affecting the industries in which the Company operates; the uncertainty of regulatory requirements and approvals; fluctuating mineral and commodity prices, final investment approval and the ability to obtain necessary financing on acceptable terms or at all. Additional information regarding the factors that may cause actual results to differ materially from these forward-looking statements is available in the Company’s filings with the Securities and Exchange Commission, including the Annual Report on Form 10-K for the year ended June 30, 2023. The Company assumes no obligation to update any of the information contained or referenced in this press release.
###
American Battery Technology Company
Media Contact:
Tiffiany Moehring
720-254-1556