Skip to main content
Equibles

6-K

Fortuna Mining Corp. (FSM)

6-K 2025-08-18 For: 2025-08-18
View Original
Added on April 11, 2026

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

Form 6-K

REPORT OF FOREIGN PRIVATE ISSUER PURSUANTTO RULE 13a-16 OR 15d-16 UNDER THE SECURITIES EXCHANGE ACT OF 1934

For the month of August 2025

Commission File Number 001-35297

Fortuna Mining Corp.

(Translation of registrant’s name into English)

1111 Melville Street, Suite 820, Vancouver, British Columbia, Canada V6E 3V6

(Address of principal executive office)

Indicate by check mark whether the registrant files or will file annual reports under cover of Form 20-F or Form 40-F.

FORM 20-F   ¨ FORM 40-F  þ

SIGNATURES

Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.

Date:  August 18, 2025 Fortuna Mining Corp.
(Registrant)
By: /s/  "Jorge Ganoza Durant"
Jorge Ganoza Durant
President and CEO

Exhibits:

99.1 News Release dated August 18, 2025

Exhibit 99.1

NEWS RELEASE

Fortunadrills 4.5 g/t Au over 37.4 meters at Kingfisher and 11.2 g/t Au over 5.6 meters at Sunbird, Séguéla Mine, Côte d’Ivoire

Vancouver,August 18, 2025: Fortuna Mining Corp. (NYSE: FSM | TSX: FVI) is pleased to report updated exploration drilling results from the Kingfisher and Sunbird deposits at the Séguéla Mine in Côte d’Ivoire.

Paul Weedon, Senior Vice President of Exploration at Fortuna, commented, “A successful infill drill program was completed at Kingfisher, with several notable intersections confirming the broad nature of the mineralization, including 4.5 g/t Au over an estimated true width of 37.4 meters from 79 meters in drill hole SGRD2363. Exploration has now turned to further extending the strike and depth at Kingfisher, successfully intersecting mineralization 300 meters below surface and a further 250 meters along strike.”

Mr. Weedon continued “Deep exploration drilling testing the southern extent of Sunbird has continued to return excellent results while upgrading the geological confidence and expanding the mineralized envelope, with results including 8.5 g/t Au over an estimated true width of 7.0 meters from 566 meters in drill hole SGRD2431. In addition, drilling has recently identified near surface shallow mineralization approximately 180 meters into the footwall, with results including 2.1 g/t over an estimated true width of 8.4 meters from 32 meters in drill hole SGRD2418 and 5.6 g/t Au over an estimated true width of 4.9 meters from 98 meters in drill hole SGRD2422. Mineralization remains open at depth and along strike.”

Kingfisher Deposit Drilling Highlights

SGRD2313: 9.4 g/t Au<br><br> <br>58.1 g/t Au<br><br> <br>36.2 g/t Au<br><br> <br>2.1 g/t Au<br><br> <br>12.1 g/t Au over an estimated true width of 17.0 meters from 105 meters, including<br><br> <br>over an estimated true width of 0.9 meters from 118<br> meters, and<br><br> <br>over an estimated true width of 2.6 meters from 121<br> meters<br><br> <br>over an estimated true width of 13.6 meters from 131 meters, including<br><br> <br>over an estimated true width of 0.9 meters from 138<br> meters
SGRD2349: 5.6 g/t Au<br><br> <br>63.1 g/t Au<br><br> <br>14.1 g/t Au<br><br> <br>2.4 g/t Au<br><br> <br>30.2 g/t Au over an estimated true width of 22.1 meters from 83 meters, including<br><br> <br>over an estimated true width of 0.9 meters from 94<br> meters, and<br><br> <br>over an estimated true width of 2.6 meters from 101<br> meters<br><br> <br>over an estimated true width of 18.7 meters from 113 meters, including<br><br> <br>over an estimated true width of 0.9 meters from 115<br> meters
SGRD2363: 4.5 g/t Au<br><br> <br>28.4 g/t Au<br><br> <br>26.1 g/t Au<br><br> <br>12.3 g/t Au over an estimated true width of 37.4 meters from 79 meters, including<br><br> <br>over an estimated true width of 0.9 meters from 103<br> meters, and<br><br> <br>over an estimated true width of 2.6 meters from 107<br> meters, and<br><br> <br>over an estimated true width of 0.9 meters from 122<br> meters
SGRD2366: 4.4 g/t Au<br><br> <br>48.9 g/t Au over an estimated true width of 20.4 meters from 28 meters, including<br><br> <br>over an estimated true width of 0.9 meters from 48<br> meters
SGRD2367: 4.0 g/t Au<br><br> <br>3.7 g/t Au<br><br> <br>28.2 g/t Au over an estimated true width of 6.8 meters from 53 meters<br><br> <br>over an estimated true width of 23.8 meters from 72 meters, including<br><br> <br>over an estimated true width of 1.7 meters from 97<br> meters

SGRD2370: 3.0 g/t Au<br><br> <br>15.6 g/t Au<br><br> <br>33.5 g/t Au<br><br> <br>15.2 g/t Au over an estimated true width of 31.5 meters from 127 meters, including<br><br> <br>over an estimated true width of 0.9 meters from 133<br> meters, and<br><br> <br>over an estimated true width of 0.9 meters from 150<br> meters, and<br><br> <br>over an estimated true width of 0.9 meters from 159<br> meters,
SGRD2381: 4.2 g/t Au<br><br> <br>14.0 g/t Au<br><br> <br>11.4 g/t Au<br><br> <br>15.1 g/t Au over an estimated true width of 26.4 meters from 36 meters, including<br><br> <br>over an estimated true width of 0.9 meters from 47<br> meters, and<br><br> <br>over an estimated true width of 0.9 meters from 52<br> meters, and<br><br> <br>over an estimated true width of 1.7 meters from 61<br> meters

An additional 78 drill holes, totaling 13,262 meters, have been completed at the Kingfisher Deposit (refer to Figure 1) as part of the resource confidence infill and extension drill program (refer to Figure 2). Drilling to test the emerging down-plunge potential to the north is advancing with two drill rigs in operation. Highlights include drill hole SGRD2501, which intersected 12.7 g/t Au over an estimated true width of 0.9 meters as part of a wider interval of 1.6 g/t Au over an estimated true width of 9.4 meters from 362 meters depth, approximately 300 meters vertically. This is the deepest drilling to date at Kingfisher, with mineralization remaining open along strike and at depth along a greater than one kilometer strike. Drilling is planned to continue through 2025.

The apparent moderate northerly plunge interpreted for the Kingfisher mineralization is atypical for Séguéla, where a moderate southerly plunge is more common. This variation is interpreted as being related to localized dextral movement along the main shear corridor.

-2-

Figure1: Location of the Kingfisher and Sunbird deposits, Séguéla Mine, Côte d’Ivoire

-3-

Figure2: Kingfisher Deposit long-section - looking west, Séguéla Mine, Côte d’Ivoire

-4-

Sunbird Deposit Drilling Highlights

SGRD2219: 3.0 g/t Au<br><br> <br>12.2 g/t Au<br><br> <br>37.8 g/t Au over an estimated true width of 4.2 meters from 410 meters<br><br> <br>over an estimated true width of 4.9 meters from 420 meters, including<br><br> <br>over an estimated true width of 1.4 meters from 425<br> meters
SGRD2406: 25.2 g/t Au over an estimated true width of 2.1 meters from 360 meters
SGRD2407: 9.1 g/t Au<br><br> <br>52.5 g/t Au over an estimated true width of 5.6 meters from 196 meters, including<br><br> <br>over an estimated true width of 0.7 meters from 199<br> meters
SGRD2409: 11.2 g/t Au<br><br> <br>24.6 g/t Au over an estimated true width of 5.6 meters from 479 meters, including<br><br> <br>over an estimated true width of 2.1 meters from 480<br> meters
SGRD2427: 4.1 g/t Au<br><br> <br>10.4 g/t Au over an estimated true width of 4.2 meters from 472 meters<br><br> <br>over an estimated true width of 4.9 meters from 483 meters
SGRD2431: 8.5 g/t Au<br><br> <br>53.3 g/t Au<br><br> <br>6.6 g/t Au<br><br> <br>21.1 g/t Au over an estimated true width of 7.0 meters from 566 meters, including<br><br> <br>over an estimated true width of 0.7 meters from 566<br> meters<br><br> <br>over an estimated true width of 2.8 meters from 591 meters, including<br><br> <br>over an estimated true width of 0.7 meters from 591<br> meters
SGRD2433**:** 13.1 g/t Au<br><br> <br>26.8 g/t Au<br><br> <br>23.2 g/t Au<br><br> <br>7.1 g/t Au<br><br> <br>10.4 g/t Au<br><br> <br>18.2 g/t Au<br><br> <br>21.1 g/t Au over an estimated true width of 3.5 meters from 472 meters, including<br><br> <br>over an estimated true width of 0.7 meters from 473<br> meters, and<br><br> <br>over an estimated true width of 0.7 meters from 476<br> meters<br><br> <br>over an estimated true width of 7.7 meters from 482 meters, including<br><br> <br>over an estimated true width of 0.7 meters from 482<br> meters, and<br><br> <br>over an estimated true width of 0.7 meters from 484<br> meters, and<br><br> <br>over an estimated true width of 0.7 meters from<br>487 meters

An additional 41 drill holes, totaling 17,532 meters, have been completed at the Sunbird Deposit (refer to Figure 1) as part of the resource confidence infill and extension program (refer to Figure 3). The program had two objectives: first, to infill and upgrade resource confidence for an approximate 600-meter section along strike of the current underground resource; and second, to extend and expand the down-plunge extension a further 300 meters south.

Drilling on the main shoot has continued to intersect high grades along the projected plunge, with drill-defined mineralization now extending more than 1.1 kilometers down plunge, approximately 700 meters below surface. Results include 11.2 g/t Au over an estimated true width of 5.6 meters from 479 meters in drill hole SGRD2409. Results such as 10.4 g/t Au over an estimated true width of 4.9 meters from 483 meters in drill hole SGRD2427, and 12.2 g/t Au over an estimate true width of 4.9 meters from 420 meters in drill hole SGRD2219, highlight the emergence of a second high grade shoot extending at least 800 meters down plunge from the bottom of the currently defined pit. Mineralization remains open at depth and along strike, with drilling scheduled to continue until the end of 2025.

Drilling targeting the deep extensions also intersected near-surface mineralization approximately 180 meters into the footwall. Further drilling will be carried out to determine the mineralized extent, which is presently open over a 400-meter strike length, and relationship to Sunbird as well as historic small-scale artisanal workings further south along strike. Results include 5.6 g/t Au over an estimated true width of 4.9 meters from 98 meters in drill hole SGRD2422, and 14.7 g/t Au over an estimated true width of 2.8 meters from 32 meters in drill hole SGRD2218.

-5-

Figure3: Sunbird Deposit long-section - looking west, Séguéla Mine, Côte d’Ivoire

-6-

Quality Assurance & Quality Control (QA- QC)

All drilling was completed under supervision of Fortuna personnel, following standardized procedures and methodologies.

Reverse Circulation (RC) Drilling

RC drilling used a 5.25-inch face sampling pneumatic hammer, with samples collected into 60-liter plastic bags. Samples were kept dry by maintaining sufficient air pressure to exclude groundwater inflow. If water ingress exceeded the air pressure, RC drilling was stopped, and drilling converted to diamond core tails. Once collected, RC samples were riffle split through a three-tier splitter to produce a 12.5% representative sample for laboratory submission. The remaining 87.5% samples were stored at the drill site until assay results were received and validated. Coarse reject samples from mineralized samples corresponding to significant intervals are retained and stored on-site at the Company´s core yard.

Diamond Drilling (DD)

DD drill holes started with HQ sized diameter, before reducing to NQ diameter diamond drill bits on intersecting fresh rock. The core was logged, marked for sampling in standard one-meter lengths or to a geological boundary, then cut into equal halves using a diamond saw. One half was retained in the original core box and stored in a secure location at the Company core yard at the project site. The other half was sampled, catalogued, and placed into sealed bags and securely stored at the site until shipment.

Sample Transport and Analysis

All RC and DD samples were transported by Company vehicle or commercial courier to ALS Global’s preparation laboratory in Yamoussoukro, Cote d’Ivoire or Bureau Veritas’ preparation and analytical laboratory in Abidjan, Cote d’Ivoire. Sample pulps prepared by ALS Global were then transported via commercial courier to ALS Global’s facility in Ouagadougou, Burkina Faso. Routine gold analysis using a 50-gram charge and fire assay with an atomic absorption finish was completed for all samples at either ALS’s Ouagadougou laboratory or Bureau Veritas’ laboratory in Abidjan. Samples returning assays >10 ppm Au were reanalyzed using a 50-gram charge and fire assay with a gravimetric finish.

Quality Control

Quality control procedures included systematic insertion of blanks, duplicates, and certified reference standards into the sample stream. Both ALS Global and Bureau Veritas laboratories also inserted their own quality control samples.

-7-

Qualified Person

Paul Weedon, Senior Vice President Exploration for Fortuna Mining Corp., is a Qualified Person as defined by National Instrument 43-101 being a member of the Australian Institute of Geoscientists (Membership #6001). Mr. Weedon has reviewed and approved the scientific and technical information contained in this news release. He has also verified the data disclosed, including the sampling, analytical and test data underlying the information or opinions contained herein, by reviewing geochemical and geological databases and examining diamond drill core. There were no limitations to the verification process.

About Fortuna Mining Corp.

Fortuna Mining Corp. is a Canadian precious metals mining company with three operating mines and a portfolio of exploration projects in Argentina, Côte d’Ivoire, Mexico, and Peru, as well as the Diamba Sud Gold Project in Senegal. Sustainability is at the core of our operations and stakeholder relationships. We produce gold and silver while creating long-term shared value through efficient production, environmental stewardship, and social responsibility. For more information, please visit our website at www.fortunamining.com

ON BEHALF OF THE BOARD

Jorge A. Ganoza

President, CEO, and Director

Fortuna Mining Corp.

Investor Relations:

CarlosBaca | info@fmcmail.com | fortunamining.com

| X | LinkedIn | YouTube

-8-

Forward looking Statements

Thisnews release contains forward-looking statements which constitute “forward-looking information” within the meaning of applicableCanadian securities legislation and “forward-looking statements” within the meaning of the “safe harbor” provisionsof the Private Securities Litigation Reform Act of 1995 (collectively, “Forward-looking Statements”). All statements includedherein, other than statements of historical fact, are Forward-looking Statements and are subject to a variety of known and unknown risksand uncertainties which could cause actual events or results to differ materially from those reflected in the Forward-looking Statements.The Forward-looking Statements in this news release may include, without limitation, the Company’s proposed exploration plans atthe Séguéla Mine ; statements about the Company’s business strategies, plans and outlook; the Company’splans for its mines and mineral properties; changes in general economic conditions and financial markets; the impact of inflationary pressureson the Company’s business and operations; the future results of exploration activities; expectations with respect to metal gradeestimates and the impact of any variations relative to metals grades experienced; assumed and future metal prices; the merit of the Company’smines and mineral properties; and the future financial or operating performance of the Company. Often, but not always, these Forward-lookingStatements can be identified by the use of words such as “estimated”, “potential”, “open”, “future”,“assumed”, “projected”, “proposed”, “used”, “detailed”, “has been”,“gain”, “planned”, “reflecting”, “will”, “anticipated”, “estimated”“containing”, “remaining”, “to be”, or statements that events, “could” or “should”occur or be achieved and similar expressions, including negative variations.

Forward-lookingStatements involve known and unknown risks, uncertainties and other factors which may cause the actual results, performance, or achievementsof the Company to be materially different from any results, performance or achievements expressed or implied by the Forward-looking Statements.Such uncertainties and factors include, among others, operational risks associated with mining and mineral processing; uncertainty relatingto Mineral Resource and Mineral Reserve estimates; uncertainty relating to capital and operating costs, production schedules and economicreturns; risks relating to the Company’s ability to replace its Mineral Reserves; risks related to the conversion of Mineral Resourcesto Mineral Reserves; risks associated with mineral exploration and project development; uncertainty relating to the repatriation of fundsas a result of currency controls; environmental matters including obtaining or renewing environmental permits and potential liabilityclaims; uncertainty relating to nature and climate conditions; laws and regulations regarding the protection of the environment(including greenhouse gas emission reduction and other decarbonization requirements and the uncertainty surrounding the interpretationof omnibus Bill C-59 and the related amendments to the Competition Act (Canada); risks associated with political instability and changesto the regulations governing the Company’s business operations; changes in national and local government legislation, taxation,controls, regulations and political or economic developments in countries in which the Company does or may carry on business; risks associatedwith war, hostilities or other conflicts, such as the Ukrainian – Russian, and Israeli – Hamas conflicts, and the impactsthey may have on global economic activity; risks relating to the termination of the Company’s mining concessions in certain circumstances;developing and maintaining relationships with local communities and stakeholders; risks associated with losing control of public perceptionas a result of social media and other web-based applications; potential opposition to the Company’s exploration, development andoperational activities; risks related to the Company’s ability to obtain adequate financing for planned exploration and developmentactivities; property title matters; risks related to the ability to retain or extend title to the Company’s mineral properties;risks relating to the integration of businesses and assets acquired by the Company; impairments; risks associated with climate changelegislation; reliance on key personnel; adequacy of insurance coverage; operational safety and security risks; legal proceedings and potentiallegal proceedings; uncertainties relating to general economic conditions; risks relating to a global pandemic, which could impact theCompany’s business, operations, financial condition and share price; competition; fluctuations in metal prices; risks associatedwith entering into commodity forward and option contracts for base metals production; fluctuations in currency exchange rates and interestrates; tax audits and reassessments; risks related to hedging; uncertainty relating to concentrate treatment charges and transportationcosts; sufficiency of monies allotted by the Company for land reclamation; risks associated with dependence upon information technologysystems, which are subject to disruption, damage, failure and risks with implementation and integration; labor relations issues; as wellas those factors discussed under “Risk Factors” in the Company's Annual Information Form for the fiscal year ended December31, 2024. Although the Company has attempted to identify important factors that could cause actual actions, events, or results to differmaterially from those described in Forward-looking Statements, there may be other factors that cause actions, events or results to differfrom those anticipated, estimated or intended.

-9-

Forward-looking Statements contained hereinare based on the assumptions, beliefs, expectations and opinions of management, including, but not limited to, the accuracy of the Company’scurrent Mineral Resource and Mineral Reserve estimates; that the Company’s activities will be conducted in accordance with the Company’spublic statements and stated goals; that there will be no material adverse change affecting the Company, its properties or its productionestimates (which assume accuracy of projected ore grade, mining rates, recovery timing, and recovery rate estimates and may be impactedby unscheduled maintenance, labor and contractor availability and other operating or technical difficulties); the duration and effectof global and local inflation; the duration and impacts of geo-political uncertainties on the Company’s production, workforce, business,operations and financial condition; the expected trends in mineral prices, inflation and currency exchange rates; that all required approvalsand permits will be obtained for the Company’s business and operations on acceptable terms; that there will be no significant disruptionsaffecting the Company's operations and such other assumptions as set out herein. Forward-looking Statements are made as of the date hereofand the Company disclaims any obligation to update any Forward-looking Statements, whether as a result of new information, future events,or results or otherwise, except as required by law. There can be no assurance that these Forward-looking Statements will prove to be accurate,as actual results and future events could differ materially from those anticipated in such statements. Accordingly, investors should notplace undue reliance on Forward-looking Statements.

Cautionary Note to United States InvestorsConcerning Estimates of Reserves and Resources

All reserve and resource estimatesincluded in this news release have been prepared in accordance with National Instrument 43-101 Standards of Disclosure for MineralProjects ("NI 43-101") and the Canadian Institute of Mining, Metallurgy, and Petroleum Definition Standards on MineralResources and Mineral Reserves. NI 43-101 is a rule developed by the Canadian Securities Administrators that establishes standardsfor public disclosure by a Canadian company of scientific and technical information concerning mineral projects. All Mineral Reserveand Mineral Resource estimates contained in the technical disclosure have been prepared in accordance with NI 43-101 and theCanadian Institute of Mining, Metallurgy and Petroleum Definition Standards on Mineral Resources and Reserves. Canadian standards,including NI 43-101, differ significantly from the requirements of the Securities and Exchange Commission, and mineral reserve andresource information included in this news release may not be comparable to similar information disclosed by U.S. companies.

-10-

Appendix1: Séguéla Mine drill program details of the drill holes and assay results for the Kingfisher and Sunbird deposits

HoleID Easting (WGS84_29N) Northing (WGS84_29N) Elev.<br><br> <br>(m) EOH^1,2^ Depth (m) UTMAzimuth Dip Depth^2^ From<br><br> <br>(m) Depth^2^ To(m) Drilled^2^ Width (m) ETW^3^ (m) Au (ppm) Hole Type^4^ Area
SGRD2272 743649 892480 390 170 90 -60 110 123 13 11.1 1.1 RCD Kingfisher
131 143 12 10.2 0.6 RCD Kingfisher
SGRD2274 743748 892835 394 120 90 -60 NSI RCD Kingfisher
SGRD2294 743751 892581 383 132 90 -60 101 108 7 6.0 1.0 RCD Kingfisher
SGRD2301 743723 892779 392 216 90 -60 144 158 14 11.9 1.8 RCD Kingfisher
162 178 16 13.6 5.8 RCD Kingfisher
inclu. 169 170 1 0.9 53.9 RCD Kingfisher
SGRD2305 743727 892731 398 168 90 -60 103 111 8 6.8 1.0 RCD Kingfisher
128 141 13 11.1 2.8 RCD Kingfisher
145 147 2 1.7 9.2 RCD Kingfisher
inclu. 146 147 1 0.9 17.7 RCD Kingfisher
151 156 5 4.3 2.7 RCD Kingfisher
SGRD2310 743700 892732 404 231 90 -60 121 128 7 6.0 1.2 RCD Kingfisher
159 168 9 7.7 1.5 RCD Kingfisher
174 181 7 6.0 1.7 RCD Kingfisher
SGRD2313 743726 892681 399 168 90 -60 105 125 20 17.0 9.4 RCD Kingfisher
inclu. 118 119 1 0.9 58.1 RCD Kingfisher
and 121 124 3 2.6 36.2 RCD Kingfisher
131 147 16 13.6 2.1 RCD Kingfisher
inclu. 138 139 1 0.9 12.1 RCD Kingfisher
SGRD2319 743701 892680 404 210.4 90 -60 132 163 31 26.4 2.5 RCD Kingfisher
inclu. 150 151 1 0.9 10.0 RCD Kingfisher
and 162 163 1 0.9 22.3 RCD Kingfisher
169 189 20 17.0 4.5 RCD Kingfisher
inclu. 177 179 2 1.7 33.9 RCD Kingfisher
SGRD2321 743674 892431 386 156.2 90 -60 66 68 2 1.7 3.4 RCD Kingfisher
74 78 4 3.4 1.4 RCD Kingfisher
98 107 9 7.7 0.7 RCD Kingfisher
132 138 6 5.1 1.8 RCD Kingfisher
SGRD2323 743676 892580 405 196.8 90 -60 131 151 20 17.0 2.9 RCD Kingfisher
inclu. 131 132 1 0.9 12.7 RCD Kingfisher
and 136 137 1 0.9 12.9 RCD Kingfisher
SGRD2324 743674 892678 408 228.7 90 -60 67 73 6 5.1 1.9 RCD Kingfisher
169 179 10 8.5 0.9 RCD Kingfisher
183 193 10 8.5 1.5 RCD Kingfisher 
-11-

HoleID Easting (WGS84_29N) Northing (WGS84_29N) Elev.<br><br> <br>(m) EOH^1,2^ Depth (m) UTMAzimuth Dip Depth^2^ From<br><br> <br>(m) Depth^2^ To(m) Drilled^2^ Width (m) ETW^3^ (m) Au (ppm) Hole Type^4^ Area
203 214 11 9.4 1.3 RCD Kingfisher
219 228.7 9.7 8.2 2.3 RCD Kingfisher
inclu. 220 221 1 0.9 13.3 RCD Kingfisher
SGRD2326 743649 892581 406 210 90 -60 151 158 7 6.0 0.7 RCD Kingfisher
165 172 7 6.0 1.9 RCD Kingfisher
SGRD2327 743699 892631 396 189 90 -60 118 144 26 22.1 1.6 RCD Kingfisher
151 170 19 16.2 1.3 RCD Kingfisher
SGRD2333 743628 892377 384 160 90 -60 90 101 11 9.4 1.8 RCD Kingfisher
139 156 17 14.5 1.4 RCD Kingfisher
SGRD2335 743648 892528 399 188.8 90 -60 83 84 1 0.9 6.3 RCD Kingfisher
138 158 20 17.0 1.0 RCD Kingfisher
175 183 8 6.8 0.8 RCD Kingfisher
SGRD2338 743651 892428 396 201 90 -60 91 93 2 1.7 3.3 RCD Kingfisher
105 113 8 6.8 1.8 RCD Kingfisher
134 136 2 1.7 8.4 RCD Kingfisher
inclu. 134 135 1 0.9 14.0 RCD Kingfisher
SGRD2339 743626 892432 399 198 90 -60 120 133 13 11.1 0.9 RCD Kingfisher
157 172 15 12.8 1.8 RCD Kingfisher
inclu. 167 168 1 0.9 12.1 RCD Kingfisher
SGRD2340 743651 892229 384 120 90 -60 41 47 6 5.1 1.1 RCD Kingfisher
63 104 41 34.9 2.3 RCD Kingfisher
inclu. 65 66 1 0.9 10.2 RCD Kingfisher
and 75 76 1 0.9 10.3 RCD Kingfisher
SGRD2347 743626 892182 404 135 90 -60 66 78 12 10.2 3.4 RCD Kingfisher
inclu. 73 74 1 0.9 24.0 RCD Kingfisher
SGRD2349 743652 892331 409 142 90 -60 61 63 2 1.7 2.8 RCD Kingfisher
83 109 26 22.1 5.6 RCD Kingfisher
inclu. 94 95 1 0.9 63.1 RCD Kingfisher
and 101 104 3 2.6 14.1 RCD Kingfisher
113 135 22 18.7 2.4 RCD Kingfisher
inclu. 115 116 1 0.9 30.2 RCD Kingfisher
SGRD2350 743626 892332 412 153 90 -60 88 106 18 15.3 3.3 RCD Kingfisher
inclu. 91 93 2 1.7 24.2 RCD Kingfisher
129 143 14 11.9 1.8 RCD Kingfisher
inclu. 138 139 1 0.9 12.6 RCD Kingfisher
SGRD2353 743652 892132 410 117.2 90 -60 58 63 5 4.3 1.6 RCD Kingfisher
80 86 6 5.1 3.3 RCD Kingfisher 
-12-

HoleID Easting (WGS84_29N) Northing (WGS84_29N) Elev.<br><br> <br>(m) EOH^1,2^ Depth (m) UTMAzimuth Dip Depth^2^ From<br><br> <br>(m) Depth^2^ To(m) Drilled^2^ Width (m) ETW^3^ (m) Au (ppm) Hole Type^4^ Area
SGRD2354 743626 892130 412 129.3 90 -60 78 93 15 12.8 0.8 RCD Kingfisher
99 112 13 11.1 0.8 RCD Kingfisher
SGRC2358 743650 892075 424 98 90 -60 43 53 10 8.5 1.6 RC Kingfisher
57 80 23 19.6 0.9 RC Kingfisher
SGRC2359 743691 892030 424 34 90 -60 NSI RC Kingfisher
SGRC2360 743670 892030 427 78 90 -60 NSI RC Kingfisher
SGRC2361 743645 892030 431 110 90 -60 NSI RC Kingfisher
SGRC2362 743675 892130 414 70 90 -60 11 13 2 1.7 2.9 RC Kingfisher
28 48 20 17.0 1.7 RC Kingfisher
inclu. 40 41 1 0.9 11.6 RC Kingfisher
52 63 11 9.4 1.3 RC Kingfisher
SGRD2363 743650 892280 415 134 90 -60 79 123 44 37.4 4.5 RCD Kingfisher
inclu. 103 104 1 0.9 28.4 RCD Kingfisher
and 107 110 3 2.6 26.1 RCD Kingfisher
and 122 123 1 0.9 12.3 RCD Kingfisher
SGRC2364 743625 892280 419 145 90 -60 84 106 22 18.7 2.2 RC Kingfisher
inclu. 88 90 2 1.7 14.9 RC Kingfisher
112 132 20 17.0 1.6 RC Kingfisher
SGRD2365 743600 892280 422 170.2 90 -60 117 132 15 12.8 1.3 RCD Kingfisher
SGRD2366 743700 892280 406 90 90 -60 28 52 24 20.4 4.4 RCD Kingfisher
inclu. 48 49 1 0.9 48.9 RCD Kingfisher
58 64 6 5.1 2.0 RCD Kingfisher
SGRC2367 743675 892280 411 109 90 -60 53 61 8 6.8 4.0 RC Kingfisher
72 100 28 23.8 3.7 RC Kingfisher
inclu. 97 99 2 1.7 28.2 RC Kingfisher
SGRD2368 743700 892780 419 261 90 -60 175 208 33 28.1 1.6 RCD Kingfisher
inclu. 199 200 1 0.9 10.5 RCD Kingfisher
219 229 10 8.5 2.6 RCD Kingfisher
SGRD2369 743600 892380 416 186 90 -60 149 155 6 5.1 1.4 RCD Kingfisher
SGRD2370 743726 892730 417 189 90 -60 127 164 37 31.5 3.0 RCD Kingfisher
inclu. 133 134 1 0.9 15.6 RCD Kingfisher
and 150 151 1 0.9 33.5 RCD Kingfisher
and 159 160 1 0.9 15.2 RCD Kingfisher
SGRD2371 743605 892331 417 171 90 -60 112 140 28 23.8 0.8 RCD Kingfisher
SGRC2372 743852 893033 409 91 90 -60 67 84 17 14.5 1.1 RC Kingfisher
SGRC2373 743838 892937 410 97 90 -60 60 77 17 14.5 2.4 RC Kingfisher
inclu. 70 71 1 0.9 19.5 RC Kingfisher 
-13-

HoleID Easting (WGS84_29N) Northing (WGS84_29N) Elev.<br><br> <br>(m) EOH^1,2^ Depth (m) UTMAzimuth Dip Depth^2^ From<br><br> <br>(m) Depth^2^ To(m) Drilled^2^ Width (m) ETW^3^ (m) Au (ppm) Hole Type^4^ Area
SGRC2374 743865 893005 405 80 90 -60 NSI RC Kingfisher
SGRC2375 743846 892983 406 100 90 -60 64 80 16 13.6 1.1 RC Kingfisher
SGRD2376 743769 892937 423 210 90 -60 158 167 9 7.7 0.7 RCD Kingfisher
172 183 11 9.4 4.4 RCD Kingfisher
inclu. 180 182 2 1.7 13.2 RCD Kingfisher
SGRD2377 743690 892833 415 288 90 -60 221 226 5 4.3 1.8 RCD Kingfisher
250 261 11 9.4 1.3 RCD Kingfisher
SGRD2378 743774 892882 422 160 90 -60 NSI RCD Kingfisher
SGRD2379 743724 892881 423 234 90 -60 NSI RCD Kingfisher
SGRD2380 743737 892602 410 135 90 -60 68 80 12 10.2 1.0 RCD Kingfisher
96 102 6 5.1 2.0 RCD Kingfisher
SGRC2381 743708 892303 405 90 90 -60 36 67 31 26.4 4.2 RC Kingfisher
inclu. 47 48 1 0.9 14.0 RC Kingfisher
and 52 53 1 0.9 11.4 RC Kingfisher
and 61 63 2 1.7 15.1 RC Kingfisher
SGRC2382 743706 892253 401 80 90 -60 17 42 25 21.3 1.8 RC Kingfisher
49 59 10 8.5 1.7 RC Kingfisher
SGRC2383 743697 892202 404 80 90 -60 19 54 35 29.8 3.1 RC Kingfisher
inclu. 26 28 2 1.7 12.9 RC Kingfisher
and 48 49 1 0.9 25.8 RC Kingfisher
SGRD2384 743607 892131 427 144 90 -60 100 102 2 1.7 25.7 RCD Kingfisher
SGRC2385 743801 892934 418 24 90 -60 Not<br> sampled RC Kingfisher
SGRC2386 743814 892979 408 49 90 -60 Not<br> sampled RC Kingfisher
SGRC2387 743625 892075 430 120 90 -60 106 108 2 1.7 3.3 RC Kingfisher
SGRC2388 743726 892159 409 54 90 -60 NSI RC Kingfisher
SGRC2389 743802 892933 418 37 90 -60 Not<br> sampled RC Kingfisher
SGRD2390 743801 892933 418 162 90 -60 112 125 13 11.1 1.5 RCD Kingfisher
SGRD2391 743575 892179 421 170 90 -60 118 129 11 9.4 0.6 RCD Kingfisher
138 147 9 7.7 1.3 RCD Kingfisher
SGRD2392 743730 892838 412 195 90 -60 170 183 13 11.1 1.3 RCD Kingfisher
SGRD2393 743602 892230 414 160 90 -60 103 110 7 6.0 0.8 RCD Kingfisher
SGRD2394 743675 892630 425 219 90 -60 148 151 3 2.6 3.4 RCD Kingfisher
158 188 30 25.5 2.4 RCD Kingfisher
inclu. 172 173 1 0.9 11.5 RCD Kingfisher
and 185 186 1 0.9 28.3 RCD Kingfisher
202 205 3 2.6 5.8 RCD Kingfisher
inclu. 203 204 1 0.9 13.7 RCD Kingfisher 
-14-

HoleID Easting (WGS84_29N) Northing (WGS84_29N) Elev.<br><br> <br>(m) EOH^1,2^ Depth (m) UTMAzimuth Dip Depth^2^ From<br><br> <br>(m) Depth^2^ To(m) Drilled^2^ Width (m) ETW^3^ (m) Au (ppm) Hole Type^4^ Area
SGRD2395 743625 892480 416 195 90 -60 149 154 5 4.3 1.8 RCD Kingfisher
172 183 11 9.4 1.7 RCD Kingfisher
187 188 1 0.9 6.7 RCD Kingfisher
SGRD2396 743625 892580 431 230 90 -60 179 188 9 7.7 0.8 RCD Kingfisher
218 225 7 6.0 1.5 RCD Kingfisher
SGRD2397 743675 892730 429 252 90 -60 198 215 17 14.5 2.7 RCD Kingfisher
inclu. 203 204 1 0.9 11.7 RCD Kingfisher
219 249 30 25.5 2.5 RCD Kingfisher
inclu. 233 234 1 0.9 33.5 RCD Kingfisher
SGRD2398 743815 892980 408 140 90 -60 112 115 3 2.6 2.8 RCD Kingfisher
SGRD2399 743575 892280 423 186 90 -60 138 141 3 2.6 3.1 RCD Kingfisher
168 174 6 5.1 1.8 RCD Kingfisher
SGRD2400 743615 892900 434 340 90 -60 282 290 8 6.8 0.9 RCD Kingfisher
300 313 13 11.1 1.1 RCD Kingfisher
327 331 4 3.4 15.8 RCD Kingfisher
inclu. 328 331 3 2.6 20.6 RCD Kingfisher
SGRD2501 743595 893000 455 440 90 -60 362 373 11 9.4 1.6 RCD Kingfisher
362 363 1 0.9 12.7 RCD Kingfisher
386 391 5 4.3 1.1 RCD Kingfisher
SGRD2502 743655 893000 442 372 90 -60 301 307 6 5.1 1.0 RCD Kingfisher
SGRD2503 743670 892900 427 303 90 -60 275 292 17 14.5 0.9 RCD Kingfisher
297 299 2 1.7 3.1 RCD Kingfisher
SGRD2504 743560 892900 444 408 90 -60 389 394 5 4.3 3.6 RCD Kingfisher
inclu. 392 393 1 0.9 14.4 RCD Kingfisher
SGRD2505 743560 892230 419 180 90 -60 NSI RCD Kingfisher
SGRD2506 743575 892130 432 180 90 -60 128 132 4 3.4 2.9 RCD Kingfisher
SGRD2507 743500 892405 437 306 90 -60 NSI RCD Kingfisher
SGRD2508 743716 893000 425 282 90 -60 172 177 5 4.3 1.2 RCD Kingfisher
SGRD2509 743508 892455 443 300 90 -60 263 265 2 1.7 3.2 RCD Kingfisher
SGRD2511 743510 892355 430 273 90 -60 247 249 2 1.7 6.1 RCD Kingfisher
inclu. 248 249 1 0.9 10.6 RCD Kingfisher
SGRC2512 743560 892755 447 50 90 -60 Not<br> sampled RC Kingfisher
SGRC2514 743640 892960 443 61 90 -60 Not<br> sampled RC Kingfisher
SGRD2215 742280 891928 600 780 90 -60 707 710 3 2.1 3.3 RCD Sunbird
734 737 3 2.1 17.5 RCD Sunbird
inclu. 735 736 1 0.7 45.8 RCD Sunbird
741 747 6 4.2 7.6 RCD Sunbird 
-15-

HoleID Easting (WGS84_29N) Northing (WGS84_29N) Elev.<br><br> <br>(m) EOH^1,2^ Depth (m) UTMAzimuth Dip Depth^2^ From<br><br> <br>(m) Depth^2^ To(m) Drilled^2^ Width (m) ETW^3^ (m) Au (ppm) Hole Type^4^ Area
inclu. 741 742 1 0.7 10.4 RCD Sunbird
and 745 746 1 0.7 14.9 RCD Sunbird
751 756 5 3.5 2.7 RCD Sunbird
759 761 2 1.4 5.7 RCD Sunbird
SGRD2216 742415 892220 578 552 90 -60 68 76 8 5.6 1.6 RCD Sunbird<br> FW
513 521 8 5.6 5.2 RCD Sunbird
inclu. 516 517 1 0.7 11.0 RCD Sunbird
SGRD2217 742495 892510 551 507 90 -60 465 467 2 1.4 3.6 RCD Sunbird
SGRD2218 742540 892835 535 550 90 -60 16 24 8 5.6 1.3 RCD Sunbird<br> FW
32 36 4 2.8 14.7 RCD Sunbird<br> FW
510 511 1 0.7 7.0 RCD Sunbird
SGRD2219 742540 892835 535 460.2 90 -60 410 416 6 4.2 3.0 RCD Sunbird
420 427 7 4.9 12.2 RCD Sunbird
inclu. 425 427 2 1.4 37.8 RCD Sunbird
SGRD2401 742550 892525 567 400.2 90 -60 316 320 4 2.8 15.8 RCD Sunbird
inclu. 317 320 3 2.1 19.8 RCD Sunbird
353 354 1 0.7 9.7 RCD Sunbird
SGRD2402 742455 892410 559 510 90 -60 468 470 2 1.4 4.5 RCD Sunbird
475 476 1 0.7 7.1 RCD Sunbird
SGRD2403 742530 892355 573 380.1 90 -60 300 301 1 0.7 7.1 RCD Sunbird
328 334 6 4.2 5.6 RCD Sunbird
inclu. 330 331 1 0.7 18.3 RCD Sunbird
and 333 334 1 0.7 5.6 RCD Sunbird
SGRD2404 742504 892314 572 393 90 -60 282 283 1 0.7 128.7 RCD Sunbird
340 341 1 0.7 10.3 RCD Sunbird
362 365 3 2.1 4.4 RCD Sunbird
374 375 1 0.7 10.1 RCD Sunbird
SGRD2405 742532 892553 561 430 90 -60 404 405 1 0.7 8.2 RCD Sunbird
411 413 2 1.4 4.3 RCD Sunbird
SGRD2406 742491 892276 574 430 90 -60 360 363 3 2.1 25.2 RCD Sunbird
inclu. 360 362 2 1.4 36.5 RCD Sunbird
376 384 8 5.6 2.5 RCD Sunbird
SGRD2407 742600 892553 577 280 90 -60 196 204 8 5.6 9.1 RCD Sunbird
inclu. 199 200 1 0.7 52.5 RCD Sunbird
228 231 3 2.1 3.3 RCD Sunbird
234 235 1 0.7 5.0 RCD Sunbird
SGRD2408 742445 892275 575 49 90 -60 Not<br> sampled RCD Sunbird
SGRD2409 742452 892278 575 510.2 90 -60 479 487 8 5.6 11.2 RCD Sunbird 
-16-

HoleID Easting (WGS84_29N) Northing (WGS84_29N) Elev.<br><br> <br>(m) EOH^1,2^ Depth (m) UTMAzimuth Dip Depth^2^ From<br><br> <br>(m) Depth^2^ To(m) Drilled^2^ Width (m) ETW^3^ (m) Au (ppm) Hole Type^4^ Area
inclu. 480 483 3 2.1 24.6 RCD Sunbird
494 495 1 0.7 23.6 RCD Sunbird
SGRD2410 742586 892380 578 260 90 -60 205 206 1 0.7 6.4 RCD Sunbird
210 215 5 3.5 5.6 RCD Sunbird
inclu. 213 214 1 0.7 14.0 RCD Sunbird
SGRD2411 742600 892438 565 230 90 -60 185 190 5 3.5 5.6 RCD Sunbird
inclu. 188 189 1 0.7 19.3 RCD Sunbird
204 205 1 0.7 7.9 RCD Sunbird
SGRD2412 742456 892248 580 480.3 90 -60 402 403 1 0.7 5.8 RCD Sunbird
426 430 4 2.8 1.9 RCD Sunbird
433 434 1 0.7 7.0 RCD Sunbird
SGRD2413 742544 892404 564 360 90 -60 274 275 1 0.7 13.0 RCD Sunbird
297 298 1 0.7 22.0 RCD Sunbird
301 303 2 1.4 9.0 RCD Sunbird
inclu. 302 303 1 0.7 15.4 RCD Sunbird
SGRD2414 742391 892170 589 97 90 -60 Not<br> sampled RCD Sunbird
SGRD2415 742393 892173 593 579 90 -60 113 115 2 1.4 11.2 RCD Sunbird<br> FW
inclu. 113 114 1 0.7 19.8 RCD Sunbird<br> FW
123 134 11 7.7 2.2 RCD Sunbird<br> FW
562 566 4 2.8 6.8 RCD Sunbird
inclu. 564 565 1 0.7 14.7 RCD Sunbird
SGRD2416 742347 892072 601 680 90 -60 163 165 2 1.4 19.1 RCD Sunbird<br> FW
inclu. 163 164 1 0.7 35.7 RCD Sunbird<br> FW
-60 637 640 3 2.1 13.7 RCD Sunbird
inclu. 637 638 1 0.7 35.2 RCD Sunbird
643 646 3 2.1 7.1 RCD Sunbird
inclu. 644 645 1 0.7 14.8 RCD Sunbird
SGRD2417 742500 892433 554 450 90 -60 372 373 1 0.7 6.4 RCD Sunbird
383 386 3 2.1 7.9 RCD Sunbird
inclu. 383 384 1 0.7 17.4 RCD Sunbird
404 406 2 1.4 3.9 RCD Sunbird
SGRD2418 742424 892305 601 540.1 90 -60 32 44 12 8.4 2.1 RCD Sunbird<br> FW
NSI RCD Sunbird
SGRD2419 742556 892888 524 450 90 -60 434 435 1 0.7 19.0 RCD Sunbird
SGRD2420 742531 892763 542 490 90 -60 430 436 6 4.2 8.4 RCD Sunbird
inclu. 430 432 2 1.4 18.1 RCD Sunbird
439 445 6 4.2 9.2 RCD Sunbird 
-17-

HoleID Easting (WGS84_29N) Northing (WGS84_29N) Elev.<br><br> <br>(m) EOH^1,2^ Depth (m) UTMAzimuth Dip Depth^2^ From<br><br> <br>(m) Depth^2^ To(m) Drilled^2^ Width (m) ETW^3^ (m) Au (ppm) Hole Type^4^ Area
inclu. 441 443 2 1.4 18.3 RCD Sunbird
SGRD2421 742543 892663 550 450 90 -60 408 411 3 2.1 1.9 RCD Sunbird
416 424 8 5.6 6.8 RCD Sunbird
inclu. 422 424 2 1.4 16.2 RCD Sunbird
SGRD2422 742405 892129 606 580 90 -60 36 40 4 2.8 2.3 RCD Sunbird<br> FW
98 105 7 4.9 5.6 RCD Sunbird<br> FW
inclu. 101 102 1 0.7 26.8 RCD Sunbird<br> FW
NSI RCD Sunbird
SGRD2423 742579 892411 568 450 90 -60 198 199 1 0.7 12.4 RCD Sunbird
211 213 2 1.4 21.5 RCD Sunbird
inclu. 211 212 1 0.7 41.2 RCD Sunbird
228 231 3 2.1 7.3 RCD Sunbird
inclu. 229 230 1 0.7 17.3 RCD Sunbird
SGRD2424 742526 892585 512 73 90 -60 Not<br> sampled RCD Sunbird
SGRD2425 742533 892587 556 450 90 -60 366 367 1 0.7 7.1 RCD Sunbird
SGRD2426 742415 892335 569 570.1 90 -60 51 52 1 0.7 25.1 RCD Sunbird<br> FW
475 477 2 1.4 2.7 RCD Sunbird
SGRD2427 742506 892611 541 520 90 -60 472 478 6 4.2 4.1 RCD Sunbird
inclu. 472 473 1 0.7 10.4 RCD Sunbird
483 490 7 4.9 10.4 RCD Sunbird
inclu. 485 489 4 2.8 16.5 RCD Sunbird
SGRD2428 742343 892123 571 680 90 -60 162 164 2 1.4 9.7 RCD Sunbird
inclu. 163 164 1 0.7 13.7 RCD Sunbird
588 590 2 1.4 3.4 RCD Sunbird
598 600 2 1.4 3.9 RCD Sunbird
605 609 4 2.8 4.5 RCD Sunbird
inclu. 608 609 1 0.7 11.4 RCD Sunbird
613 615 2 1.4 7.0 RCD Sunbird
619 624 5 3.5 10.8 RCD Sunbird
inclu. 620 621 1 0.7 39.1 RCD Sunbird
SGRD2429 742524 892676 511 480.2 90 -60 439 442 3 2.1 3.6 RCD Sunbird
449 457 8 5.6 7.6 RCD Sunbird
inclu. 454 457 3 2.1 15.1 RCD Sunbird
SGRD2430 742391 892250 569 570.1 90 -60 133 135 2 1.4 4.3 RCD Sunbird
139 143 4 2.8 1.7 RCD Sunbird
497 500 3 2.1 7.7 RCD Sunbird
inclu. 498 499 1 0.7 11.0 RCD Sunbird 
-18-

HoleID Easting (WGS84_29N) Northing (WGS84_29N) Elev.<br><br> <br>(m) EOH^1,2^ Depth (m) UTMAzimuth Dip Depth^2^ From<br><br> <br>(m) Depth^2^ To(m) Drilled^2^ Width (m) ETW^3^ (m) Au (ppm) Hole Type^4^ Area
507 508 1 0.7 15.2 RCD Sunbird
524 525 1 0.7 6.7 RCD Sunbird
551 559 8 5.6 7.3 RCD Sunbird
inclu. 553 555 2 1.4 18.4 RCD Sunbird
SGRD2431 742363 892026 605 642 90 -60 166 169 3 2.1 3.5 RCD Sunbird<br> FW
173 175 2 1.4 13.4 RCD Sunbird<br> FW
inclu. 174 175 1 0.7 25.1 RCD Sunbird<br> FW
548 549 1 0.7 15.0 RCD Sunbird
566 576 10 7.0 8.5 RCD Sunbird
inclu. 566 567 1 0.7 53.3 RCD Sunbird
591 595 4 2.8 6.6 RCD Sunbird
inclu. 591 592 1 0.7 21.1 RCD Sunbird
SGRC2432 742440 892200 585 61 90 -60 Not<br> sampled RC Sunbird
SGRD2433 742440 892200 585 520 90 -60 458 459 1 0.7 7.4 RCD Sunbird
472 477 5 3.5 13.1 RCD Sunbird
inclu. 473 474 1 0.7 26.8 RCD Sunbird
and 476 477 1 0.7 23.2 RCD Sunbird
482 493 11 7.7 7.1 RCD Sunbird
inclu. 482 483 1 0.7 10.4 RCD Sunbird
and 484 485 1 0.7 18.2 RCD Sunbird
and 487 488 1 0.7 21.1 RCD Sunbird
SGRC2435 742425 892410 563 30 90 -60 Not<br> sampled RC Sunbird
SGRD2436 742425 892410 563 570 90 -60 NSI RCD Sunbird
SGRD2437 742500 892685 536 37 90 -60 Not<br> sampled RCD Sunbird
Notes:
---

  1. EOH: End of hole

  2. Depths and widths reported to nearest significant decimal place

3.NSI: No significant intercepts

4. ETW: Estimated true width

5. RC: reverse circulation drilling | DD: diamond drilling tail | RCD: reverse circulation drilling with diamond tail

-19-

Report a Problem

Category
Description
Email (optional, for follow-up)