Oklo Inc 8-K, filed Nov 17, 2026
Oklo Inc. (OKLO)
8-K
2026-11-17
For: 2026-11-11
View Original
Added on
November 17, 2026
About this 8-K
Oklo Inc filed this 8-K on November 17, 2026, reporting on events of November 11, 2026.
Oklo Power SODI LLC, a subsidiary of Oklo Inc., entered into a HALEU Supply Agreement with Centrus Energy Corp. on November 11, 2026. The agreement requires two prepayments totaling $35 million and take-or-pay enrichment purchases for 2029 through 2031. AI summary
Items reported
- Item 1.01: Entered into a material agreement
- Item 9.01: Financial statements and exhibits
UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549
FORM 8-K
CURRENT REPORT
PURSUANT TO SECTION 13 OR 15(d)
OF THE SECURITIES EXCHANGE ACT OF 1934
Date of Report (Date of earliest event reported): November 11, 2026
(Exact name of registrant as specified in its charter)
| (State or other jurisdiction of incorporation) | (Commission File Number) | (I.R.S. Employer Identification No.) | ||||||||||||
| (Address of principal executive offices) | (Zip Code) | |||||||
(650 ) 550-0127
(Registrant’s telephone number, including area code)
N/A
(Former name or former address, if changed since last report.)
Check the appropriate box below if the Form 8-K filing is intended to simultaneously satisfy the filing obligation of the registrant under any of the following provisions:
Securities registered pursuant to Section 12(b) of the Act:
| Title of each class | Trading Symbol(s) | Name of each exchange on which registered | ||||||||||||
Indicate by check mark whether the registrant is an emerging growth company as defined in Rule 405 of the Securities Act of 1933 (§230.405 of this chapter) or Rule 12b-2 of the Securities Exchange Act of 1934 (§240.12b-2 of this chapter).
Emerging growth company x
If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. o
Item 1.01. Entry into a Material Definitive Agreement.
On November 11, 2026, Oklo Power SODI LLC, a wholly owned subsidiary of Oklo Inc. (the “Company”), entered into a HALEU Supply Agreement (the “Fuel Supply Agreement”) with Centrus Energy Corp. (“Centrus”) for uranium enrichment services and the supply of high-assay low-enriched uranium (“HALEU”). References to “Oklo” in this Item 1.01 refer to the Company and its subsidiaries, as the context requires.
The Fuel Supply Agreement provides for Centrus to make available HALEU to support the deployment and operation of Oklo’s Aurora powerhouses. The prepayments under the Fuel Supply Agreement are intended to support the construction and development of Centrus’s commercial HALEU enrichment capacity at Piketon, Ohio.
Under the Fuel Supply Agreement, Oklo has committed, subject to certain conditions, to purchase specified quantities of enrichment services for deliveries during 2029 through 2031 on a take-or-pay basis. The Fuel Supply Agreement requires Oklo to make two prepayments to Centrus in an aggregate amount of $35 million, with one prepayment due on a specified date and the other upon Centrus achieving a specified commercial milestone. The prepayments will be credited against future purchases and represent a portion of the amounts payable under the Fuel Supply Agreement.
The Fuel Supply Agreement provides rights to suspend prepayments not yet due or terminate the agreement in specified circumstances relating to Centrus’s development milestones, along with certain replacement and delivery delay provisions.
Unless earlier terminated in accordance with its terms, the Fuel Supply Agreement continues until the later of December 31, 2039, and completion of the parties’ purchase and supply obligations.
The foregoing description of the Fuel Supply Agreement does not purport to be complete and is qualified in its entirety by reference to the Fuel Supply Agreement, a copy of which is filed as Exhibit 10.1 to this Current Report on Form 8-K and incorporated herein by reference.
This Fuel Supply Agreement is separate from the HALEU supply agreement entered into with Centrus on September 30, 2026, in connection with the Company’s previously announced January 2026 agreement with Meta Platforms, Inc., as described in the Company’s Quarterly Report on Form 10-Q for the quarter ended September 30, 2026.
Item 9.01. Financial Statements and Exhibits.
(d) Exhibits. The following exhibits are included in this report:
| Exhibit Number | Description | |||||||
| 104 | Cover Page Interactive Data File (embedded within the Inline XBRL document) | |||||||
*Certain portions of this exhibit have been omitted because they are not material and are of the type that the Company customarily and actually treats as private or confidential.
1
SIGNATURES
Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned hereunto duly authorized.
| Oklo Inc. | ||||||||
| Date: November 17, 2026 | By: | /s/ R. Craig Bealmear | ||||||
| Name: | R. Craig Bealmear | |||||||
| Title: | Chief Financial Officer | |||||||
2
1 HALEU SUPPLY AGREEMENT between OKLO POWER SODI LLC and CENTRUS ENERGY CORP.
2 HALEU SUPPLY AGREEMENT This HALEU Supply Agreement (“Agreement”) is entered into as of 11 November 2026 (the “Effective Date”) by and between Oklo Power SODI LLC (“Oklo”, “Customer”, or “Buyer”), a limited liability company organized under the laws of Delaware, and Centrus Energy Corporation, a corporation organized under the laws of Delaware (“Centrus” or “Supplier”). Customer and Supplier shall be referred to herein individually as a “Party” and collectively as the “Parties”. WITNESSETH: WHEREAS, Oklo is a fission technology and nuclear fuel recycling company deploying power plants to provide clean, reliable, and affordable energy at scale with an interest in a reliable source of high-assay low-enriched uranium (“HALEU”) to enable them to meet commercial and defense demands for energy in a timely manner; and WHEREAS, Centrus is a U.S. producer of HALEU, with a U.S. advanced enrichment technology that can also be deployed to produce Enriched Product (“EUP”); WHEREAS Supplier is seeking to deploy a new uranium enrichment facility for commercial sale of HALEU and low-enriched uranium (“LEU”) (the “Enrichment Facility”); and WHEREAS, to support Supplier’s efforts to deploy the Enrichment Facility, Customer is willing to agree to terms for sales by Supplier to Customer of SWU contained in EUP that Supplier would provide should it succeed in deploying the Enrichment Facility; NOW THEREFORE, the Parties agree to the following terms and conditions. ARTICLE 1 DEFINITIONS When used herein with initial capitalization, the following terms shall have the following definitions: 1.1 “Acceptance” or “Accepted” means, in the event of Physical Delivery, the agreement by Customer that (a) the documentation regarding quality and weight regarding Enriched Product Physically Delivered under this Agreement is correct and (b) such Physically Delivered Enriched Product is Conforming Material. The time when Acceptance shall
3 be deemed to have occurred with respect to a quantity of Physically Delivered Enriched Product shall be mutually agreed pursuant to Section 6.1. 1.2 “Act” means the Atomic Energy Act of 1954, as amended. 1.3 “Affiliate” of a Party means a subsidiary (as defined below) of such Party or an entity that, through one or more intermediaries, owns or controls such Party or that is owned or controlled by an entity that also, through one or more intermediaries, owns or controls such Party. 1.4 “Annual Commitment” means Customer’s obligation to purchase the quantity of SWU specified in Table 1 for each Commitment Year. 1.5 “Assay” means the total weight of 235U per kilogram of Material divided by the total weight of all uranium isotopes per kilogram of Material, the quotient of which is multiplied by 100 and expressed as a weight percent (“w/o”). 1.6 “Base Quarter” means the first (1st) quarter of Calendar Year 2027. 1.7 “Book Transfer” or “Book Transferred” means the transfer of credits for a given quantity of Feed Material, HALEU, LEU, Enriched Product, or SWU between accounts within the nuclear material accounting system of a Converter, Deconverter, or Fabricator or of Supplier or its Affiliate. 1.8 “Business Day” means a day that is not a Saturday, Sunday or United States Legal Holiday (which is a day for which employees of the United States Federal government are excused from work with pay pursuant to a Federal statute or executive order). Unless qualified by the term “Business,” references in this Agreement to “day” or “days” refer to a calendar day or days, respectively. 1.9 “Calendar Year,” “CY” or “Year” means a period of twelve (12) months from January 1 through December 31. 1.10 “Conforming Material” means HALEU that conforms to the provisions of American Society for Testing and Materials specification, “Standard Specification for Uranium Hexafluoride Enriched from more than 8% to less than 19.75% 235U,” applicable to “Enriched Commercial Grade UF6” (as defined in paragraphs 4 and 5 of the specification), as in effect three months prior to the date of Delivery.
4 1.11 “Converter” means an NRC-licensed or DOE authorized operator who conducts Conversion and is designated by Customer in an Order to supply Feed Material. 1.12 “Deconversion” means the process to convert HALEU in the form of uranium hexafluoride gas into various other chemical forms, such as metal or oxide, used to fabricate fuels for advanced nuclear reactors. 1.13 “Deconversion Facility” means the facility at which a Deconverter conducts Deconversion. 1.14 “Deconverter” means an NRC-licensed or DOE authorized operator who conducts Deconversion and is designated by Customer in an Order to receive HALEU for the Customer. 1.15 “Deliver,” “Delivery,” or “Delivered” shall have the following meaning: 1.15.1 In the case of Enriched Product to be supplied to Customer, the term “Delivery” shall mean completion of the following: (a) a Book Transfer of such Enriched Product (or its Feed and SWU Components) to an account of Customer designated by Customer in its Order or by mutual agreement; (b) Physical Delivery of such Enriched Product Free Carrier (“FCA”) (Incoterms® 2020) Centrus’ facility in Piketon, Ohio, or under terms to be agreed pursuant to Section 6.1.; or (c) upon request by Customer or pursuant to the express terms of this Agreement, crediting of such Enriched Product (or its Feed and SWU Components) to the Product Account; and 1.15.2 In the case of Feed Material to be supplied to Supplier, the term “Delivery” shall mean D.D.P. (Incoterms® 2020) at Centrus’ production facility in Piketon, Ohio, at least 120 days prior to EUP delivery. 1.15.3 A Delivery of Material by Book Transfer or to the Product Account shall be deemed completed when the Material is credited to the Customer’s account (in the case of Enriched Product Delivered to Customer) or the Supplier’s account (in case of Feed Material Delivered to Supplier). A Feed Material Delivery by Physical Delivery shall be completed when the terms of Paragraph A2 of D.D.P. (lncoterms® 2020) are fulfilled. An EUP Material Delivery by Physical Delivery shall be completed when the terms of Paragraph A2 of FCA (lncoterms® 2020) are fulfilled.
5 1.16 “Delivery Month” means the month in which the Enriched Product is to be Delivered pursuant to the terms of Customer’s Order. 1.17 “Delivery Period” means the period of fourteen (14) to thirty (30) days specified in an Order during which Supplier is to Deliver HALEU. 1.18 “Enriched Product”, “EUP”, or “EP” means Uranium Hexafluoride with an Assay greater than 0.711 w/o but less than or equal to 19.75 w/o. 1.19 “Enrichment” means the process, measured in Separative Work Units, by which the Assay of Feed Material is increased, and Tails Material is generated. 1.20 “EP Delivery Date” means a Business Day within the Delivery Period specified in an Order on which Supplier and Customer have agreed that Supplier shall Deliver HALEU by Book Transfer to Customer’s account either on the books of the Deconverter or the books of the Supplier. 1.21 “Fabricator” means a licensed commercial nuclear fuel fabricator located in the United States designated by Customer in an Order or Withdrawal Notice. 1.22 “Facility” means a new facility operated by or for Supplier for producing HALEU for use in a commercial nuclear reactor. 1.23 “Feed Account” means an account maintained by Supplier to record the amount of Feed Material credited to Customer on the books of Supplier. 1.24 “Feed Calculation Formula” means the formula provided in Appendix C for calculating the Feed Component. 1.25 “Feed Component” means the amount of Feed Material (in kgU as UF6) required to produce Enriched Product, at a specified Assay and Tails Assay, as calculated using the equations in Appendix C. 1.26 “Feed Delivery Date” shall be one hundred twenty (120) calendar days prior to the EP Delivery Date. 1.27 “Feed Material” means natural uranium, in the form of UF6 that has not been irradiated, enriched, or depleted, with an approximate Assay of 0.711 w/o and conforms to American Society for Testing and Materials (“ASTM”) C787 or LEU nominally enriched to 4.95 w/o and conforms to ASTM C996.
6 1.28 “Fuel” means nuclear fuel fabricated with Enriched Product. 1.29 “Full cascade” means 120 centrifuges ±10%. 1.30 “Hardware” means the cylinders and overpacks supplied by Customer or its subsupplier for Physical Delivery of Feed Material or HALEU. The standards applicable to Hardware can be found in Appendix D. 1.31 “High Assay Low Enriched Uranium” or “HALEU” means Uranium Hexafluoride enriched to an Assay greater than 8.00 w/o and less than 20.00 w/o and conforms to ASTM C1962-25. 1.32 “LEU Decision Date” means June 18, 2027. 1.33 “Material” means, as the context requires, Feed Material, Tails Material, LEU, and/or HALEU. 1.34 “Material Milestone” means: (1) *** ; (2) *** ; or (3) ***. 1.35 “Natural Uranium Feed Decision Date” means the last business day of CY2027. 1.36 “Obligation Code” means (a) the code assigned under the Nuclear Material Management & Safeguards System to Material to indicate the foreign obligation(s) applicable to such Material; or (b) the code assigned by Centrus to Material to indicate the unobligated status of such Material. 1.37 “Order” means an order placed by Customer pursuant to Article 4. 1.38 “Physical Delivery”, “Physically Deliver”, and “Physically Delivered” means (a) Delivery at the facility in Piketon, Ohio, or (b) a mutually agreed alternate location, subject to the availability of HALEU transportation packages. 1.39 “Physical Delivery Terms” shall mean the terms in Sections 1.15, 5.3, and 6.1. 1.40 “Prime Rate” means the “U.S. Prime Rate” published in The Wall Street Journal, which, as of the Effective Date, is the base rate on corporate loans posted by at least 70% of the ten (10) largest U.S. banks. Should The Wall Street Journal cease publication of the Prime Rate, Supplier shall propose a new rate to be used and the
7 Parties shall negotiate in good faith to reach agreement upon a new base rate which reasonably can be expected to produce the same result as the Wall Street Journal rate, no later than sixty (60) days after Customer’s receipt of Supplier’s proposal. 1.41 “Product Account” means an account maintained by Supplier to record any HALEU credited to Customer pursuant to this Agreement. 1.42 “Reactor” means any nuclear reactor owned and operated by Customer or any of its Affiliates, and “Reactors” means all nuclear reactors operated by Customer or its Affiliates. A nuclear reactor operated but not owned by Customer or its Affiliate shall be considered a “Reactor” if Customer or its Affiliate is responsible for the purchase of Fuel for such Reactor. 1.43 “Receiver” means the Party to which an item (e.g., Material or a cylinder) is Physically Delivered by the other Party. 1.44 “Separative Work Unit” or “SWU” means the industry standard measure for Enrichment calculated according to the formula in Appendix C. 1.45 “Shipper” means the Party that Physically Delivers an item (e.g., Material or a cylinder) to the other Party. 1.46 “Spot Market Feed Value” means the applicable quantity of Feed Material (in kgU) multiplied by a spot value of Feed Material determined pursuant to Appendices F and G, respectively. 1.47 “Supplier Service Charges” means charges for services, such as handling, sampling, storage, delivery, transfer, packaging or receipt of Material, in effect at the time of performance of such services. 1.48 “SWU Component” means the number of SWU required to enrich Feed Material to produce HALEU. 1.48.1 “LEU SWU” means the SWU Component used to enrich natural uranium to 4.95 w/o 235U as specified in Section 3.1.2. 1.48.2 “HALEU SWU” means the SWU Component used to enrich 4.95 w/o 235U to 19.75 w/o 235U as specified in Section 3.1.2.
8 1.49 “Tails” or “Tails Material” means the UF6 residue, the Assay of which has been depleted equal to or less than 0.711 w/o 235U in the process of Enrichment of Feed Material to produce HALEU. 1.50 “Uranium Hexafluoride”, “UF6”, or “UF6” means the chemical compound of uranium and fluorine. 1.51 “235U” or “235U” means the fissionable uranium isotope with mass number 235. 1.52 “Withdrawal Delivery Date(s)” means a date or dates in a Withdrawal Notice on which Enriched Product in the Product Account will be withdrawn by Customer. 1.53 “Withdrawal Notice” means a written notice by Customer to Supplier to withdraw Enriched Product from the Product Account. ARTICLE 2 TERM 2.1 Term. This Agreement shall be effective as of the Effective Date and, unless earlier terminated in accordance with the terms hereof, shall remain in force until the later of (i) the last day of 2039 or (ii) the date on which all purchase obligations of Customer and supply obligations of Supplier (other than those set forth in Section 15.3) hereunder are fulfilled. ARTICLE 3 SCOPE 3.1 Commitment of the Parties. 3.1.1. For purposes of this Agreement, each of the Years 2029-2031 shall be referred to as a “Commitment Year.” 3.1.2. Subject to the contingencies set forth in Section 3.2, Customer shall purchase from Supplier, and Supplier will sell to Customer the SWU as described in Table 1, below and, if Customer has not elected to provide LEU feed pursuant to Section 5.1.1, LEU SWUs. Table 1: Firm Commitment Years, 2029-2031 LEU Enrichment from natural to 4.95% HALEU Enrichment from 4.95% to 19.75% 19.75% HALEU Product Year LEU (SWU) HALEU (SWU) kgU (EUP)
9 3.1.3. Under the take or pay provision pursuant to Section 3.1.3.4, Customer's payment obligation for the HALEU product shall include the following components, as applicable based on Customer's elections under Section 5.1: 3.1.3.1. In all cases, the contracted price for HALEU SWUs as set forth in Article 8 and, if applicable, Section 3.1.3.4; 3.1.3.2. If Customer has not elected to provide LEU feed pursuant to Section 5.1.1, the contracted price for LEU SWUs as set forth in Article 8 and, if applicable, Section 3.1.3.4; and 3.1.3.3. If Customer has not elected to provide Feed Material pursuant to Section 5.1.1 or Section 5.1.2, the market available price for natural uranium feed determined in accordance with Appendix G, plus *** of such market available price as set forth in Section 5.1.3. 3.1.3.4. During each Commitment Year, Customer shall purchase, and take Delivery of, sufficient quantities of EUP to meet the minimum purchase obligation for such Commitment Year specified in Table 1 (the “Minimum Purchase Obligation”), the Minimum Purchase Obligation is on a take-or-pay basis and is an absolute and unconditional obligation of Customer, subject to the provisions of Section 15.1.4 (Termination for Supplier Default). If, during any Commitment Year, Customer purchases and takes delivery of a quantity of EP less than the Minimum Purchase Obligation for such Commitment Year (a “Shortfall”), then Customer shall pay Supplier an amount of liquidated damages equal to the aggregate Price of the Shortfall quantity, calculated based on the highest unit Price in effect during such Commitment Year (the “Shortfall Payment”). Payment shall be made no later than payment for the last delivery of EP for such Commitment Year. Any Shortfall Payment not paid when due shall accrue interest from the due date until paid in full consistent with Section 8.5.4. If 2029- 2030 *** *** *** 2031 *** *** *** Total *** *** ***
10 Supplier sells or otherwise transfers to a third party any EUP attributable to a Shortfall for which Customer has made a Shortfall Payment, Supplier shall, within thirty (30) days following such sale or transfer, credit or refund to Customer an amount equal to the net proceeds received by Supplier from such third-party sale or transfer (after deducting Supplier’s reasonable, documented costs of such sale), up to a maximum of the Shortfall Payment previously paid by Customer with respect to such EUP. 3.2 Contingencies. 3.2.1. If any Material Milestone is delayed by more than twelve (12) months past its target date, or is abandoned, Customer may, by written notice to Supplier, (i) suspend the prepayment if not yet due pending cure, or (ii) terminate this Agreement and the Parties’ obligations thereunder. Upon termination under clause (ii), Supplier shall refund to Customer 65% of the prepayment received under Section 8.2.2. 3.2.2. Buyer and Supplier will meet quarterly to review progress on Material Milestones. 3.2.3. If requested, Supplier shall provide a written annual status report addressing each Material Milestone and any schedule variances. 3.3 Any SWU sold or Enriched Product Delivered to Customer pursuant to this Agreement shall be used in U.S. commercial nuclear power reactors owned or operated by Customer or its Affiliates. Supplier shall not unreasonably withhold its consent to waive this requirement. 3.4 The Parties acknowledge that Customer and Supplier (or their respective Affiliates) may enter into one or more separate, independent contracts for the purchase and sale of LEU and HALEU in addition to the LEU and HALEU covered by this Agreement (any such other contract, a “Separate Contract”). The term “Separate Contract” shall also include that certain side letter agreement, entered into by the Parties on September 30, 2026, as it may be amended from time to time. This Agreement and any Separate Contract are separate and independent agreements and, for all purposes, shall be treated as such. Except as expressly set forth herein, nothing in this Agreement shall incorporate by reference, or be construed to incorporate, any term of a Separate Contract, and no default, breach, termination, or other event under a Separate Contract shall constitute or give rise to a default, breach, cross-default, termination, or cross-termination under this Agreement, nor shall any default, breach, termination, or other event under this Agreement constitute or give rise to a default, breach, termination, or cross-termination
11 under a Separate Contract. For the avoidance of doubt, Article 14 (Entire Agreement; Termination of Prior Agreements) shall not apply to, and shall not terminate or supersede, any Separate Contract. ARTICLE 4 ENRICHED PRODUCT ORDERS 4.1 Planning Data. No later than July 1 of each Year (beginning on July 1, 2028) prior to Commitment Year and for all remaining delivery years under this Agreement, Customer shall provide Supplier with non-binding, written estimates of the information in Appendix A. 4.2 Orders. 4.2.1. For each Commitment Year, and subject to the remaining subsections of this Section 4.2, Customer shall place Orders with Supplier for SWU sufficient to satisfy its Annual Commitment. In addition to the quantity of SWU ordered, the Order shall stipulate the Delivery in such Commitment Year, of Enriched Product containing the ordered SWU. 4.2.1.1. For the Annual Commitments in Table 1, Buyer may elect to increase or decrease the EUP quantities by plus or minus five percent (+/-5%) by providing written notice to Supplier no later than at the time of the Binding Order pursuant to Section 4.2.2. 4.2.2. Customer shall place each Order no later than two hundred ten (210) calendar days prior to the Delivery Month. The Order shall include all the information specified in Appendix B. The Order shall be binding on the Parties upon its receipt by Supplier. 4.2.3. Customer’s Annual Commitment shall be split into two substantially equal deliveries in the second quarter (April-June) and fourth quarter (October-December) of the delivery year. 4.2.3.1. Substantially equal deliveries will have a maximum of 10% difference between as measured in kgU between the second quarter and fourth quarter shipments. 4.2.3.2. Larger differences between the second quarter and fourth quarter may be considered by the Supplier and approved at its sole discretion. 4.2.4. Adjustments of an Order requested after the Order is submitted shall not be binding on Supplier unless such adjustments are mutually agreed upon by the Parties.
12 4.3 Product and Tails Assay. 4.3.1. The Assay selected for Enriched Product to be Delivered pursuant to an Order shall be 19.75 w/o 235U. 4.3.2. For all Orders for Delivery of Enriched Product under this Agreement the Tails Assay shall be 0.27 w/o 235U. ARTICLE 5 FEED MATERIAL 5.1. Elections 5.1.1. Buyer may elect to provide physical delivery of LEU feed by providing a written notice to Supplier on or before the LEU Decision Date. 5.1.2. Buyer may elect to provide physical delivery of natural uranium by the Natural Uranium Feed Decision Date. 5.1.3. If Buyer declines to deliver LEU feed, the LEU SWU Price calculated in accordance with Section 8.1.1 shall apply to Supplier’s enrichment of natural uranium to LEU, and if Supplier determines that it has sufficient LEU enrichment capacity available to perform such enrichment for the scheduled delivery, then Supplier will provide natural uranium feed required using the Feed Calculation Formula in Appendix C. Centrus shall charge Oklo *** of the market available price for the feedstock in addition to the market rate SWU charges for LEU SWU at the applicable time. The market available price for feedstock shall be determined in accordance with the formula in Appendix G. 5.1.4. If Buyer declines to deliver LEU feed, the LEU SWU Price calculated in accordance with Section 8.1.1 shall apply to Supplier’s enrichment of natural uranium to LEU, and if Supplier determines that it does not have sufficient LEU enrichment capacity to produce the required quantity of HALEU from natural uranium for the scheduled delivery, then Supplier shall procure the necessary LEU enrichment from the market at the then current LEU SWU market price. In accordance with Section 8.5, Supplier shall invoice Buyer for the LEU SWU price actually incurred, *** .
13 5.2. Delivery of Feed Material. 5.2.1. For the HALEU to be Delivered pursuant to each Order, Customer shall make available to Supplier the Feed Material using the Feed Calculation Formula in Appendix C. Customer shall ensure that a sufficient amount of Feed Material is Delivered to Supplier to account for the higher end of the quantity and Assay variations under Section 6.2.1. The Physical Delivery of Feed Material to Supplier is further subject to the requirements of Appendices E, F and G. 5.2.2. Customer shall ensure that all the Feed Material required under Section 5.2.1 is Delivered to Supplier not later than the Feed Delivery Date. Subject to Acceptance, Supplier shall allocate Feed Material credited to the Feed Account to Customer’s Order(s). The Feed Material shall not be available to Customer for Book Transfers to any third party. If more Feed Material is Delivered than is needed for the Order, Customer may direct Supplier to allocate the excess to a future Order. In making this allocation, Supplier shall comply with the instructions provided by Customer on or prior to the Feed Delivery Date for such future Order concerning the quantity of each origin to use. If, on a Feed Delivery Date there is an insufficient quantity of Feed Material of the origin(s) specified by Customer for such Order, however, Supplier shall have the right to allocate to the Order Feed Material of any origin that may then be credited to the Feed Account. 5.2.3. If, on the Feed Delivery Date, there is an insufficient quantity of available Feed Material of any origin credited to the Feed Account to meet Customer’s obligations under Section 5.2.1 (“Feed Shortfall”), Supplier may either (a) reduce the quantity of HALEU to be Delivered to Customer pursuant to the relevant Order by an amount of HALEU with a Feed Component equal to the Feed Shortfall (the “Reduction Election”) or (b) withhold the Delivery of the HALEU for which there is a Feed Shortfall until the Feed Shortfall is eliminated and invoice Customer a fee (the “Feed Loan Fee”) for each day the Feed Shortfall continues. The Feed Loan Fee shall be determined by multiplying a daily interest rate based upon the annual interest rate calculated in accordance with Section 8.5.4 by *** of the Spot Market Feed Value, as of the Feed Delivery Date, multiplied by the quantity of the Feed Shortfall. The Feed Loan Fee shall be payable for the period from the Feed Delivery Date until the Feed Shortfall is eliminated under Section 5.2.4. 5.2.4. At Supplier’s option, the Feed Shortfall may be eliminated in one of three ways:
14 5.2.4.1. A quantity of Feed Material equal to the Feed Shortfall is Delivered to, and Accepted by, Supplier; 5.2.4.2. Supplier makes the Reduction Election; or 5.2.4.3. Supplier elects to sell the Feed Material to Customer under Section 5.2.6. 5.2.5. Supplier’s election to charge the Feed Loan Fee rather than make the Reduction Election shall not limit Supplier’s ability to subsequently elect to reduce the quantity of HALEU provided Supplier makes the Reduction Election on or before the Deadline (as defined in Section 5.2.6). However, if Supplier makes the Reduction Election, Supplier shall not charge Customer the Feed Loan Fee for the Feed Shortfall unless Supplier delayed exercise of the Reduction Election at Customer’s request. 5.2.6. If within ninety (90) days after the Feed Delivery Date (such 90th day, the “Deadline”), Supplier has not made the Reduction Election, Supplier may elect to sell to Customer a quantity of Feed Material equal to the Feed Shortfall outstanding on the Deadline, at a per kgU as UF6 price of *** of the Spot Market Feed Value as of the Deadline and thereafter Deliver the HALEU to the Customer. 5.2.7. Supplier shall give Customer prompt notice when making its election(s). Where Supplier is entitled to invoice Customer for a fee or charge under this Section 5.2, Supplier shall issue an invoice therefor payable in accordance with the provisions of Article 8. 5.2.8. For any Order for which Supplier elects to withhold Delivery of HALEU pending Delivery of a Feed Shortfall, Supplier may invoice Customer for the SWU Component of the withheld HALEU as of the first day of the Delivery Period, and Customer shall pay such invoice in accordance with the provisions of Article 8. This invoice shall be in addition to (or may be combined with) the invoice for HALEU Delivered to Customer for which there was not Feed Shortfall. 5.3. Method of Delivery. 5.3.1. Absent mutual agreement on a different delivery method, Customer shall Physically Deliver Feed Material to the Facility. The delivery will be D.D.P. (Incoterms® 2020) at Supplier’s facility in Piketon, Ohio, and comply with the terms for Physical Delivery as set forth in Appendices E and G.
15 5.3.2. Feed Material shall be credited to the Feed Account upon Acceptance by Supplier. The terms for Acceptance are set forth in Appendices E and G. 5.3.3. Customer shall ensure that the Feed Material to be Physically Delivered is Delivered to the Facility in sufficient time to ensure that it can be Accepted and credited to the Feed Account not later than the Feed Delivery Date. 5.4. Book Transfers. 5.4.1. Subject to mutual agreement of Parties, Feed Material credited to a third party’s account at Supplier may be Book Transferred to the Feed Account. 5.4.2. Feed Material held in the Feed Account may only be used for Orders under this Agreement and may not be Book Transferred to third parties without Supplier’s Agreement. 5.5. Country of Origin and Obligation Code. Customer may Deliver Feed Material of any country of origin and Obligation Code that is non-Russian, non-Chinese, and non-Iranian under this Agreement; provided that, at the time the Feed Material is Delivered, Supplier is permitted under applicable laws and regulations to enrich such Feed Material in the United States and to Deliver to Customer HALEU produced with such Feed Material for consumption in the United States. Customer assumes the risk that, after the crediting of such Feed Material, a change in applicable law or regulations may preclude Supplier from enriching such Feed Material or from Delivering HALEU derived from such Feed Material to Customer. Supplier shall not be obligated to ascribe the origin(s) and Obligation Code(s) of the Feed Material supplied to Supplier to the HALEU Delivered to Customer or to the Feed Component of such HALEU. 5.6. Title and Risk of Loss. 5.6.1. Customer shall hold title to all Feed Material Delivered to Supplier for credit to the Feed Account. Title to Feed Material allocated to an Order pursuant to Section 5.2 shall remain with Customer until Delivery of the corresponding HALEU to Customer. The transfer to Customer of title to the Feed Component of such HALEU shall be treated as the return to Customer of the Feed Component of its Feed Material. Accordingly, upon Delivery of the HALEU, Supplier shall deduct from the Feed Account a quantity of Feed Material equal to the Feed Component of the HALEU Delivered to Customer and title to such Feed Material shall thereupon pass to Supplier.
16 5.6.2. Supplier shall bear risk of loss of, and shall enjoy the exclusive and unrestricted right to use, Feed Material credited to the Feed Account and such Feed Material may be commingled and treated as fungible with other uranium inventories at the Facility. Other than ensuring that appropriate amounts and Obligation Code(s) of Feed Material are recorded in Supplier’s material accounting system, Supplier shall not be required to segregate, or account to Customer or to any other party for, any specific Feed Material in such inventories. ARTICLE 6 ENRICHED PRODUCT DELIVERY 6.1. Delivery. 6.1.1. Supplier shall Deliver to Customer HALEU in accordance with each Order placed pursuant to Section 4.2. Delivery shall be FCA at Enrichment Facility (Incoterms ® 2020), or at a mutually agreed alternative location contingent on sufficient authorized transportation packages. 6.1.2. Supplier may also Deliver HALEU to Customer by crediting the Product Account in accordance with Section 6.4. 6.1.3. If Delivery is by Physical Delivery, Supplier will provide Hardware. At Supplier’s sole discretion, HALEU will be delivered in 5B or 30B cylinders. 6.2. Variations. 6.2.1. HALEU Physically Delivered to Customer shall be subject to the variations set out below. 6.2.1.1.The Assay of the HALEU in each cylinder of HALEU Physically Delivered to Customer shall not differ from the Assay specified herein by more than plus or minus one-quarter of one percent (±0.25%). 6.2.1.2.The quantity of HALEU Physically Delivered to Customer by Supplier shall not differ from the quantity ordered or withdrawn by Customer by more than plus or minus one-half of one percent (±0.50%). 6.2.2. The Book Transfer of HALEU to Customer’s account at Deconverter, or the crediting of the Product Account in accordance with Section 6.4, shall satisfy Supplier’s obligations hereunder with respect to the Delivery of the HALEU.
17 6.2.3. If Delivery is by Physical Delivery, the provisions of Appendix E shall apply. 6.3. Title and Risk of Loss. 6.3.1. Title to, and risk of loss of, HALEU ordered by Customer under Article 4 shall pass to Customer upon Delivery to Customer pursuant to Section 6.1.1. 6.3.2. Title to HALEU credited to the Product Account under Section 6.4 shall pass to Customer upon completion of the recording of such credit by Supplier. Notwithstanding the transfer of title to Customer, Supplier shall have risk of loss, and the exclusive right to use and possess such HALEU and may commingle the HALEU with other Supplier inventories. Supplier shall not be required to segregate, or account to Customer for, the specific HALEU credited to the Product Account. Risk of loss of HALEU in the Product Account shall pass to Customer upon Physical Delivery to Customer or Book Transfer to Customer’s account at Deconverter. 6.4. Product Account. 6.4.1. The Product Account shall be maintained for the following purpose, where HALEU is to be Delivered by Physical Delivery and Customer has not taken such Delivery by the end of the Delivery Period. Supplier may also credit any HALEU withheld under Section 5.2.4.1 effective the first day of the Delivery Period. The crediting of the Product Account under this Section 6.4.1 shall be considered a Delivery for payment purposes. 6.4.2. HALEU credited to the Product Account does not represent physical Material, but instead represents an obligation by Supplier to Deliver HALEU at time to be mutually agreed once the conditions that led to crediting of HALEU to the Product Account in lieu of Delivery of the HALEU have been met. 6.4.3. HALEU may be withdrawn from the Product Account by mutual agreement, including in connection with an Order submitted after crediting of the Product Account with the HALEU. HALEU that has been credited to the Product Account pursuant to a Feed Shortfall as described in Sections 5.2.4.1 and 6.4.1 may not be withdrawn until after Delivery to Supplier of the Feed Shortfall. 6.5. Country of Origin and Obligation Code. Supplier may Deliver HALEU of any origin or Obligation Code to Customer provided that at the time of Delivery Customer is permitted to use such HALEU in the Reactors under U.S. federal laws and regulations applicable to
18 the Reactors. However, in no event shall Supplier be required to provide HALEU produced by any supplier other than the Supplier. 6.6. Delivery Delay. 6.6.1. If for any reason other than a delay excused under Article 10 or an act or omission of Customer or Customer’s representative, contractor, or a person acting on Customer’s behalf, Supplier fails to Deliver to Customer, pursuant to an Order or Withdrawal Notice, EP of the Assay, quantity, and specification required by this Agreement by the last day of the Delivery Period, Supplier shall reimburse Customer for any reasonable penalty or fee assessed against Customer by Deconverter as a result of such delay. These penalties and fees are contingent upon licensed or authorized transportation packages being available in commercial quantities and a licensed or authorized Deconverter with sufficient capacity to accept the delivery. 6.6.2. If for any reason, other than a delay excused under Article 10 or an act or omission of Customer or Customer’s representative, contractor, or a person acting on Customer’s behalf, Supplier fails to Deliver to Customer, pursuant to an Order or Withdrawal Notice, EP of the Assay, quantity, and specification required by this Agreement by the last day of the Delivery Period, Customer may cancel Delivery of the EP that Supplier failed to Deliver and purchase an equivalent amount of replacement or additional EP from another source if the failure to Deliver continues for more than ninety (90) days after the following as applicable:
19 6.6.2.1.In the case of an outright failure to Deliver, the last day of the Delivery Period; 6.6.2.2.In the case of a failure to replace non-conforming EP pursuant to Appendix E, the date by which such replacement is required under Appendix E. 6.6.2.3.Notwithstanding Section 6.6.4, Customer's right to cancel Delivery and purchase replacement EP under this Section 6.6.2 shall not be extinguished by Supplier’s tender of conforming EP if, at the time of such tender, Customer has already (a) executed a binding agreement to purchase or lease Replacement EP from a third party, or (b) issued a binding purchase order, letter of intent, or similar commitment for Replacement EP that Customer cannot withdraw without material cost or liability. 6.6.2.4.If, as of the date that is ninety (90) days after the last day of the applicable Delivery Period (or, in the case of Section 6.6.2.2, ninety (90) days after the date by which replacement was required under Appendix E), Supplier has not completed Delivery of the relevant EP in conformance with this Agreement, Customer's right to cancel and purchase replacement EP under this Section 6.6.2 shall become unconditional and shall no longer be subject to Section 6.6.4. 6.6.3. If Customer makes use of such alternative sources in accordance with Section 6.6.2, the following shall apply: 6.6.3.1.if Customer purchases an equivalent quantity of EP from an alternative source, Customer shall have the right to cancel, without charge, the relevant delivery of EP under this Agreement. Customer shall make reasonable efforts to purchase the enrichment services contained in such EP at the lowest reasonable market price. 6.6.4. The remedies in Section 6.6.3 are contingent on Customer canceling the Delivery from Supplier and contracting to purchase the replacement EP from another source prior to Supplier tendering conforming EP for Delivery. If, however, Supplier tenders conforming EP for Delivery before Customer enters into a contract to purchase or lease Replacement EP from a third party, Customer shall take Delivery of the EP from Supplier in accordance with this Agreement; provided that Supplier must complete such Delivery within ninety (90) Business Days following such tender. 6.6.5. If Customer cancels the relevant delivery of EP under Section 6.6.3.1, the relevant Feed Material made available to Supplier by Customer shall be offset against future
20 obligations or, if agreed between the Parties, an equivalent quantity thereof shall be returned to Customer. 6.6.6. If the delay is not caused by an act or omission of Customer or a Force Majeure event as defined in Article 10, Supplier shall reimburse Customer for all reasonable additional costs incurred by Customer in effecting the measures in this Article 6.6. However, notwithstanding the above, Supplier’s obligations to reimburse Customer for all reasonable additional costs shall not exceed the invoiced SWU price for the scheduled delivery plus ten million dollars ($10,000,000). 6.6.7. Reimbursement under this Section 6.6 shall be Customer’s exclusive remedy for Supplier’s failure to Deliver EP hereunder. Shortfalls in quantity due to differences in each Party’s gross weight determination of a cylinder of EP shall be resolved under Paragraph 8 of Appendix E and not this Section 6.6. ARTICLE 7 TAILS MATERIAL 7.1. Title and Risk of Loss. Supplier shall bear all risk and responsibility for any Tails Material. ARTICLE 8 PRICES AND TERMS OF PAYMENT 8.1. Prices. Customer shall pay for the SWU Component of Enriched Product Delivered pursuant to Customer’s purchase obligations under Article 3 at price per SWU (the “Price”) determined under this Article 8. The Price to be used to calculate invoices for the SWU Component of Enriched Product is referred to herein as the “Invoice Price” and shall be determined in accordance with Sections 8.1.1 through 8.1.3, as applicable. The Invoice Price is the Price payable by the Customer. 8.1.1. Price shall be determined as follows: 𝑃 = 𝐵 × 𝐴 Where: P = Price B = the “Base Price” A = the “Inflation Adjustment Factor.” The Base Price is shown below in Table 2.
21 Table 2 LEU SWU Base Price (US$) HALEU SWU Base Price (US$) *** *** The Inflation Adjustment Factor is determined as follows: 𝐴 = 1 + (𝐼! − 𝐼"#$%) 𝐼"#$% Where: A = the Inflation Adjustment Factor In = the greater of (a) the most recently published Implicit Price Deflator for the U.S. Gross Domestic Product (“IPD-GDP”) index available on the date of delivery of the SWU (“EUP Delivery Date”) as published by the U.S. Department of Commerce, for the quarter (the “Escalation End Quarter”) prior to the quarter in which the (A) EP Delivery Date falls, or (B) in the case of a Physical Delivery, the date during the Delivery Period in which the Enriched Product is Physically Delivered falls, or (b) IBase IBase = the first quarter IPD-GDP value for CY 2026. 8.1.2. If the IPD-GDP is discontinued or the basis of its calculation is substantially modified, another index which is most likely to produce the same result as the IPD-GDP shall be proposed by Supplier to Customer. Such proposal shall become the new index unless, within thirty (30) days after receiving Supplier’s proposal, Customer proposes a different index to Supplier that Customer believes is more likely to produce the same result as the IPD-GDP, in which case the Parties shall mutually agree upon a new index. If the Parties are unable to agree on a new index within thirty (30) days after Customer makes its proposal to Supplier, the Parties shall resolve the matter under the procedures in Article 18; provided that, pending resolution of such dispute, the Parties shall use, as a preliminary Inflation Adjustment Factor, at least the Inflation Adjustment Factor calculated according to the formula in Section 8.1.1 for the last quarter for which a value of IPD-GDP is available (other than an IPD-GDP value, the basis of which has been substantially modified). 8.1.3. A change in the base year of the IPD-GDP shall not, in itself, be construed as a substantial modification for purposes of Section 8.1.2 above and, after such a change
22 is adopted, the IPD-GDP values produced as a result of such change shall be used by the Parties to adjust the Base Price in accordance with the formula above. 8.2. Schedule for Prepayments 8.2.1. Oklo shall pay Centrus a prepayment of $35,000,000. 8.2.2. The prepayment shall be made in two installments. 8.2.2.1.The first prepayment of *** shall be completed by *** . 8.2.2.2.The second prepayment of *** shall be completed *** . 8.2.2.3.All prepayments shall be credited to future Buyer Orders. 8.2.3. Subject to mutual agreement, Supplier may agree to a Letter of Credit or Performance Bond as a substitute for payments (not “prepayments”), if established at least one year prior to initial delivery. 8.3. Supplier Service Charges. 8.3.1 In addition to the Prices for HALEU in Section 8.1, Customer shall pay service charges for any additional services and actions not expressly provided for in this Agreement or excluded from such fees in Sections 8.3.2 or 8.3.3. Fees for each additional service or action will be provided prior to beginning work. 8.3.2 Supplier shall not charge Customer for (a) the maintenance of the Feed or Product Account; (b) the Book Transfer of Material to, or the recording of Material in, such accounts, or (c) the Book Transfer of Material from either account to Supplier. Supplier may, however, impose a charge for Book Transfers from either account to a third party. 8.3.3 HALEU UF6 storage will be free for twelve (12) months after the EUP delivery. Storage fees will apply thereafter, and in no event for any year that incurs storage fees will the storage fees exceed five percent (5%) of the invoiced value of the Material. 8.4. Taxes and Other Governmental Impositions. 8.4.1 All Prices, fees, and charges under this Agreement exclude all U.S. federal, state or local sales, use, excise, property or other taxes or governmental impositions, or
23 payments in lieu of such taxes or impositions, including interest and penalties thereon (collectively, “Taxes”) levied upon, or measured by, the value, the sale or the sale price of Feed Material, Tails Material, HALEU, SWU, or Supplier services, all of which shall be borne or reimbursed by Customer without regard to any contrary definitions in Incoterms® used in this Agreement or under applicable law, custom, or trade practice, and without regard to which Party may have responsibility under applicable laws and regulations to pay or collect such Taxes. 8.4.2 Each Party agrees that it will cooperate with, and take reasonable efforts requested by, the other Party, to lawfully minimize Taxes on or connected with any transaction under this Agreement and that it will not unreasonably withhold its consent when requested to produce, execute, or file any documents required to reduce, secure exemption from, obtain refund of, or eliminate Taxes of any kind whatsoever. 8.4.3 Neither Party shall be responsible for a tax imposed on the income of the other. 8.4.4 Nothing herein shall require Supplier to manage its inventories or modify its operations except as it deems appropriate in its sole discretion. 8.5. Invoices. 8.5.1. In the case of HALEU or services associated with the Delivery of HALEU that are normally billed by Supplier at the time of Delivery, an invoice shall be issued on or immediately after the date of Delivery, subject to readjustment pursuant to Section 8.3. In the case of other prices, fees, charges, or costs which Supplier is entitled to charge or collect from Customer under this Agreement, including any supplemental charge under Article 13 or the appendices hereto, an invoice shall be issued according to Supplier’s invoicing procedures. 8.5.2. All invoiced amounts shall be expressed and paid in United States dollars. 8.5.3. Customer shall pay each Supplier invoice by wire transfer of immediately available funds in accordance with Supplier invoice instructions no later than the day (the “Due Date”), which is thirty (30) days prior to the EUP delivery. 8.5.3.1.To avoid the accelerated payment schedule, Buyer, subject to mutual agreement, may provide a Letter of Credit or Performance Bond guaranteeing payment. 8.5.4. If Customer fails to pay the invoice in full by the Due Date, Customer shall pay Supplier interest at a per annum rate equal to the lesser of (a) the maximum rate
24 permitted by applicable law, or (b) the Prime Rate in effect on the Due Date plus four (4) percentage points (400 basis points) on all amounts due to Supplier and not received by Supplier on the Due Date, such interest to be calculated from the day following the Due Date until the date of payment. Customer shall pay such interest within thirty (30) days after the date of any invoice issued by Supplier for such interest charges (the “Interest Due Date”), in accordance with instructions furnished with the invoice. 8.5.5. In the event the Due Date or the Interest Due Date does not fall on a Business Day, then payment shall be due as follows: 8.5.5.1.if the Due Date or the Interest Due Date falls on a Saturday, payment shall be due on the preceding Business Day; 8.5.5.2.if the Due Date or the Interest Due Date falls on a Sunday, payment shall be due on the following Business Day; and 8.5.5.3.if the Due Date or the Interest Due Date falls on a United States Legal Holiday, payment shall be due on the preceding Business Day, unless such United States Legal Holiday falls on a Monday, in which case payment shall be due on the first Business Day following such United States Legal Holiday. 8.5.6. If, pursuant to Appendix E, Supplier disputes a Rejection Notification submitted by Customer with respect to a Physical Delivery of HALEU, Customer shall, pending resolution of the dispute, either (a) make provisional payment against the invoice for such Delivery based on Supplier’s data, or (b) make payment against the invoice for that portion with respect to which there is no disagreement and withhold the balance pending resolution of the dispute. If, as a result of the resolution of such dispute, it is determined that Customer failed to pay Supplier any amount that was owed (“Underpayment”), or paid Supplier any amount that was not owed (“Overpayment”), then an appropriate payment adjustment shall be made within thirty (30) days of final resolution of such dispute. At the same time as such payment adjustment is made, interest shall be paid on any Underpayment or Overpayment from the date that such Underpayment was originally due, or, as the case may be, from the date that such Overpayment was originally made, to the date of the adjustment payment, using a daily interest rate based upon the annual interest rate used for calculating late payment charges under Section 8.5.4.
25 8.5.7. Notwithstanding any other provision of this Agreement, Supplier’s failure to issue an invoice in accordance with this Section shall not be deemed to be a waiver by Supplier of its right to receive payment for HALEU or services Delivered or furnished to Customer pursuant to this Agreement. 8.5.8. In addition to any other remedies that Supplier may have, if any invoice for more than $500,000 issued by Supplier to Customer pursuant to this Agreement has not been paid in full by Customer within ninety (90) days after the Due Date, Supplier shall have the right, without cost or liability, to suspend all its obligations hereunder. Supplier’s rights under this Section 8.5.8 shall not be affected in any way by any delay on the part of Supplier in exercising such right. 8.5.9. These payment terms are subject to change in the event of material deterioration in the financial status, or a change in control, of Customer. Such changes shall be agreed upon by the Parties prior to any Delivery of HALEU following such material deterioration. ARTICLE 9 REPRESENTATIONS AND WARRANTIES 9.1. Supplier Representations. Supplier represents to Customer as follows: 9.1.1. This Agreement is a valid and binding obligation of Supplier. 9.1.2. Supplier has, or will have at the time required, all necessary licenses and governmental approvals required to engage in the transactions contemplated by this Agreement. 9.1.3. All HALEU furnished to Customer hereunder shall be Delivered free and clear of all liens, pledges, encumbrances, security interests or title claims created by Supplier, its agents, or others acting on its behalf and Supplier shall indemnify, hold harmless, and, at Customer’s option, defend Customer from any claim contrary to the representations in Section 9.1. 9.1.4. Supplier is, and at all times during the term of this Agreement shall remain, in compliance with all applicable law relating to its performance of this Agreement. 9.2. Customer Representations. Customer represents to Supplier as follows; 9.2.1. This Agreement is a valid and binding obligation of Customer.
26 9.2.2. Customer has, or will have at the time required, all necessary licenses and governmental approvals required to engage in the transactions contemplated by this Agreement. 9.2.3. Material credited to the Feed Account and Product Account shall at all times be free and clear of any lien, pledge, encumbrance, security interest or other claim that could impair Supplier’s right to the exclusive use of such Material, and, if allocated for Enrichment pursuant to Section 5.2, shall, at the time Supplier takes title under Section 5.6, be free and clear of any lien, pledge, encumbrance, security interest or other claim that could impair Supplier’s right to take good and marketable title to such Material, and Customer shall indemnify, hold harmless, and, at Supplier’s option, defend Supplier from any claim contrary to the representations in Section 9.2. 9.2.4. Customer is, and at all times during the term of this Agreement shall remain, in compliance with all applicable law relating to its performance of this Agreement. 9.3. Supplier Warranties. Supplier warrants to Customer that HALEU Delivered by Supplier to Customer pursuant to Article 6 shall conform to the specifications, quantity ordered, and Assay specified herein (subject, in the case of Physical Deliveries, to the applicable variations) and to the country of origin requirements in Section 6.5. In the case of Physical Deliveries Supplier warrants to Customer that HALEU Delivered by Supplier to Customer pursuant to Article 6 shall be Conforming Material. Replacement by Supplier in accordance with the terms of this Agreement of HALEU that fails to meet this warranty and payment by Supplier of any costs provided for in Section 6.6 and in Appendix E shall be Customer’s exclusive remedy for (a) any breach of this warranty by Supplier or (b) Supplier’s failure to Deliver HALEU in accordance with the terms of this Agreement; provided, that replacement shall not be required in the event Customer purchases replacement or additional SWU from another source pursuant to Section 6.6. 9.4. Disclaimer. SUPPLIER’S EXPRESS WARRANTIES CONTAINED IN THIS AGREEMENT ARE EXCLUSIVE AND SUPPLIER MAKES NO OTHER WARRANTY, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTY (A) OF MERCHANTABILITY; (B) OF FITNESS FOR ANY PARTICULAR PURPOSE; OR (C) THAT MATERIAL DELIVERED BY SUPPLIER WILL NOT RESULT IN INJURY OR DAMAGE WHEN USED FOR ANY PURPOSE. 9.5. No Claims of Sovereign Immunity. Each Party represents that it is entering into this Agreement under its authority to engage in business activity and not in any sovereign capacity and agrees that the transactions contemplated by this Agreement should be
27 considered under generally recognized principles of international law to be business activity. ARTICLE 10 FORCE MAJEURE 10.1. Excused Delays. A Party shall not be liable for any expense, loss, or damage resulting from delay in, or prevention of, performance of its obligations under this Agreement to the extent due to a cause (a “Force Majeure”) beyond the reasonable control of that Party (the “Affected Party”) including, but not limited to, fires, floods, acts of God, strikes, labor disputes, riots, transportation delays, pandemics, acts or failures to act of governmental authorities, or third parties, or inability to secure labor, materials, equipment, or utilities. In the event of any delay or prevention of performance arising by reason of a Force Majeure, the time for performance shall be extended by a period of time equal to the time lost by reason of such delay or prevention of performance. Notwithstanding the above, in no event shall a Force Majeure excuse either Party from the obligation to pay money when due under this Agreement, nor require the Affected Party to settle any labor difficulty except as the Affected Party, in its sole discretion, determines appropriate. For the avoidance of doubt, Force Majeure shall not include a Party’s failure to timely apply for, diligently pursue, obtain, or maintain any permit, license, approval, or authorization required for such Party’s performance under this Agreement, to the extent such failure results from an act or omission of such Party. 10.2. Notification. The Affected Party shall notify the other Party in writing of the Force Majeure for which excuse is claimed under Section 10.1 and the expected duration of the resultant delay within a reasonable period of time after it appears that the Force Majeure is likely to prevent or delay the performance of the Affected Party’s obligation under this Agreement, and the Affected Party shall use reasonable efforts to keep the other Party informed of any change in the facts set forth in the notice. 10.3. Delayed Deliveries. If a Force Majeure other than an act or omission of Customer or Customer’s agent, contractor, or a person acting on Customer’s behalf (irrespective of whether such act or omission is excused) prevents Supplier from Delivering HALEU hereunder for more than one hundred eighty (180) days after the last day of the Delivery Period for a quantity of HALEU, Customer shall have the option to cancel up to the quantity that Supplier has been unable to Deliver and to purchase the canceled quantity from another source, without cost or liability to or by Supplier, provided that Customer has canceled such quantity and purchased the replacement or additional SWU from
28 another source prior to receiving the Supplier Notification (as defined in Section 6.6). If, however, Supplier provides the Supplier Notification prior to Customer’s entering into a contract for the purchase of replacement or additional SWU, Customer shall take Delivery of the previously canceled quantity of Material from Supplier. If Customer elects to cancel, Customer’s commitment as specified in Article 3 for the Year in which Delivery of the delayed HALEU was to have been made shall be reduced accordingly. Any Feed Material that Customer Delivered for the canceled HALEU shall be credited to the Feed Account. ARTICLE 11 NUCLEAR LIABILITY 11.1. Required Indemnification and Coverage in the United States. 11.1.1. Supplier intends to deploy the Facility at its site in Piketon, Ohio. The lease between Supplier and its Affiliate, United States Enrichment Corporation, and the United States Department of Energy (“DOE”) for the site in Piketon, Ohio (Portsmouth Plant), includes a nuclear hazards indemnification agreement (“DOE Nuclear Hazards Indemnification Agreement”) entered into under Sections 170 of the Act and 1403(f) of the Energy Policy Act of 1992, 42 U.S.C. §2297h-5(f). As of the Effective Date, Customer is expected to be an indemnified person under such DOE Nuclear Hazards Indemnification Agreement and Section 170d of the Act for the purposes of Supplier’s performance hereunder. Supplier shall maintain the DOE Nuclear Hazards Indemnification Agreement, or equivalent nuclear liability protection, to the extent required by applicable law and within Supplier’s control, during the period in which Material is present at the Facility in connection with this Agreement. 11.1.2. With respect to each facility (other than a Facility) in the United States at which Material Delivered to Customer under this Agreement is to be used or stored, Customer, without cost to Supplier, shall, so long as such Material remains in residence at or is in transit to or from such plant or facility: 11.1.2.1. obtain and, except as provided in Section 11.2, maintain in effect an agreement of indemnification contemplated by Section 170 of the Act, and nuclear liability insurance, or other financial protection, in such form and in such amount as will meet the financial protection requirements of the Nuclear Regulatory Commission (“NRC”) pursuant to Section 170 of the Act; or 11.1.2.2. if there is no agreement of indemnification under Section 170 of the Act covering such facility (such as Fabricator’s plant or facility) and during any
29 portion of the transportation of the Material to or from such plant or facility, ensure that (a) nuclear liability insurance is obtained and maintained in effect that provides for at least one hundred million dollars ($100,000,000) per occurrence for property damage and bodily injury arising from a nuclear incident as defined in the Act (“Nuclear Incident”) which is not subject to an indemnification agreement under Section 170 of the Act, and (b) Supplier is included within the scope of the insured parties under such nuclear liability insurance to the extent permitted by applicable law or the applicable insurance policy. 11.1.3. The foregoing requirement in Section 11.1.2.2 above may be met with respect to a facility, where the operator of the facility (such as a Deconverter) maintains a “facility form” policy of nuclear liability insurance issued by American Nuclear Insurance if the facility meets the requirements of Section 11.1.2.2. 11.2. Substitute Financial Protection. 11.2.1. For purposes of this Section 11.2, Supplier shall be the “Responsible Party” with respect to Section 11.1.1 and the “Protected Party” with respect to Section 11.1.2 and Customer shall be the “Protected Party” with respect to Section 11.1.1 and the “Responsible Party” with respect to Section 11.1.2. 11.2.2. If the nuclear liability protection system provided by the Act is repealed, materially decreased in coverage, modified or expires, the Responsible Party shall, without cost to the Protected Party, use its reasonable efforts to obtain and maintain in effect substitute liability protection in order to avoid a material impairment of the protection afforded the Protected Party and its employees and suppliers prior to such repeal, decrease in coverage, modification or expiration under that portion of Section 11.1 for which it is the Protected Party. Such substitute protection may include, at the Responsible Party’s option, (a) government indemnity or limitation of liability, or (b) commercial liability insurance. The Protected Party may suspend its obligations under this Agreement for up to 180 days in order to permit the Responsible Party to implement substitute protection. Additionally, at the end of such suspension period, the Protected Party may terminate this Agreement, in whole or in part, without liability to the Responsible Party if the Protected Party, in its sole discretion, determines that the actions taken by the Responsible Party pursuant to this Section 11.2 are not sufficient to avoid such a material impairment of the protection afforded to the Protected Party. The Protected Party shall lose its termination right if, after suspending its obligations hereunder, the Protected Party submits an Order (if the
30 Protected Party is the Customer) or accepts an Order (if the Protected Party is Supplier). 11.3. Insurance. Any insurance required under this Article 11 shall either include Supplier and its suppliers as a named insured or include a waiver of all rights of recourse and subrogation by the insured and insurer against Supplier and its suppliers. 11.4. Required Assurances for Transfer of Material. Prior to the export of any Material Delivered to Customer under this Agreement, or the transfer to another person of any interest in Material, Customer shall provide Supplier with written assurances, reasonably satisfactory to Supplier, demonstrating that any nuclear liability protection required by applicable law in connection with the proposed transfer has been or will be obtained and maintained. This Section shall not apply to transfers solely incident to mortgages or other documents creating liens or security interests in effect as of the Effective Date (including liens or security interests arising after the Effective Date under such mortgages or other documents). The provisions of this Section shall also not limit Customer’s right to dispose of spent nuclear fuel containing Material in accordance with applicable legal requirements after such fuel is finally discharged from one of the Reactors. 11.5. Property Damage Waiver. Notwithstanding any other provision in this Agreement, in no event shall a Party (the “Supplying Party”) or its suppliers be liable to the other Party for loss of, damage to, or loss of use of, any property resulting from a Nuclear Incident involving Material Delivered by the Supplying Party hereunder, and the other Party shall use its commercially reasonable efforts to obtain a waiver of such liability running in favor of the Supplying Party and its suppliers, from any person or entity to which the other Party may give an interest in, or the right to possess, such Material. 11.6. Definition of Material. For purposes of this Article, “Material” shall be deemed to include Material Delivered to a Party; any cylinders, storage, or transportation equipment provided by either Party in connection with such a Delivery; nuclear fuel or other products fabricated from, or containing, the Material Delivered to Customer; and the services provided by Supplier in connection with Material Delivered hereunder. 11.7. Sub-Suppliers. References in this Article to suppliers of Supplier shall be deemed to include any vendor, contractor, subcontractor, or other entity, regardless of tier, who supplies equipment, services, material, information, or financing to Supplier in conjunction with the Material. ARTICLE 12 OTHER LIABILITY
31 12.1. Limitation of Liability. 12.1.1. Neither Party shall be liable to the other Party for any incidental, consequential, special, exemplary, penal, indirect, or punitive damages of any nature arising out of or relating to the performance or breach of this Agreement, including, but not limited to, to the extent constituting such types of damages, replacement power costs, loss of revenue, loss of anticipated profits, or loss of use of, or damage to, plant or other property. 12.1.2. Either Party’s maximum aggregate liability for any and all claims arising out of or relating to the performance or breach of this Agreement (including claims under Section 6.6), whether based upon contract, tort (regardless of degree of fault or negligence), strict liability, warranty, or otherwise, shall in no event exceed ten million dollars ($10,000,000) above the take-or-pay price provided herein. 12.1.3. All claims that a Party (the “Claiming Party”) may have against the other Party, whether based upon contract, tort (regardless of degree of fault or negligence), strict liability, warranty, or otherwise, for any losses or damages arising out of, connected with, or resulting from the performance or breach of this Agreement shall be limited to specifically identified written claims submitted by the Claiming Party to the other Party prior to the expiration of one (1) year after the Claiming Party knows or should have known of the occurrence of the event or the first of a series of events which gives rise to the claim; provided, however, that this one-year limit shall not (a) bar any counterclaim, setoff, or similar cause of action asserted subsequent to the expiration of such one-year limit in response to any written claim submitted prior thereto, nor (b) be construed as extending or waiving any shorter statute of limitations applicable to any claim, counterclaim, or setoff. 12.1.4. Nothing in this Section 12.1 shall be construed as limiting the liability of a Party (a) for any failure to comply with Article 11, (b) to purchase the quantities of HALEU required to be purchased hereunder, or (c) to pay the Price for HALEU Delivered hereunder or any cost or charge that is specifically payable by such Party under Article 8 and Article 13 or the appendices hereto, or any indemnity provision hereof. 12.2. Effect of Acceptance or Book Transfer. Supplier’s obligation to Deliver Conforming Material of the Assay required by this Agreement shall be deemed to have been satisfied upon (a) Acceptance of such Material by Customer in accordance with Appendix E (if the Material is Physically Delivered) or (b) the crediting of such Material to the applicable account at Supplier or to Customer’s account at Deconverter (if the Material is Delivered
32 by Book Transfer or credit to such account). After Acceptance of Material Physically Delivered, or, in the case of a Book Transfer to Customer’s account at Deconverter, recordation of such Book Transfer by Deconverter, Supplier shall have no responsibility for damages or other claims arising from such Material. 12.3. Indemnification for Book Transfers. Customer shall indemnify and hold Supplier harmless against all demands, claims, actions, causes of action, or assessments (“Claims”) and all resulting losses, damages, liabilities, costs, charges, duties, and expenses (including, without limitation, interest, penalties, and attorneys’ fees and expenses) (“Liabilities”) asserted against, imposed upon, or incurred by Supplier, directly or indirectly, by reason of or resulting from any Book Transfer of Material requested by Customer; provided, however, that Customer’s financial obligation under this indemnity for any Claims or Liabilities shall be reduced to the extent such Claims or Liabilities arise from Supplier’s negligence, which negligence shall be determined on a comparative negligence basis. 12.4. No Effect on Indemnification Agreements under the Act. Nothing contained in this Agreement shall deprive Supplier or Customer of any rights under indemnification agreements entered into pursuant to the Act. 12.5. Scope of Protection. The provisions of this Article and of the other Articles of this Agreement that provide for limitation or protection against liability of a Party shall (a) also protect such Party’s agents, and, to the extent they are acting on behalf of such Party, such Party’s contractors, subcontractors, suppliers, and vendors of every tier; (b) apply to the full extent permitted by law and regardless of fault; and (c) survive termination or suspension of this Agreement, as well as the fulfillment of the obligations of the Parties hereunder. ARTICLE 13 GOVERNMENTAL AUTHORIZATIONS AND REQUIREMENTS Each Party shall (a) obtain (or cause its agents to obtain) all permits, licenses, or approvals required for performance of its obligations under this Agreement, including any special nuclear material licenses and those required for the possession, storage, and transportation of Material, and (b) comply with all applicable treaties, conventions, and similar international agreements to which the United States is a party. Each Party shall reasonably cooperate with the other Party in connection with any governmental authorization, consent, approval, or other regulatory action reasonably required to perform the transactions contemplated by this Agreement. For the avoidance of doubt, neither Party shall be responsible for obtaining or maintaining any license, permit, authorization, or approval that applicable law requires to be held by the other Party.
33 ARTICLE 14 ENTIRE AGREEMENT; TERMINATION OF PRIOR AGREEMENTS The terms and conditions set forth herein are intended by Customer and Supplier to constitute the final, complete and exclusive statement of their agreement, and all prior proposals, communications, negotiations, understandings, representations, contracts and agreements (the “Prior Agreements”), whether oral or written, relating to the subject matter of this Agreement (but without regard to whether the term of this Agreement is equivalent to the term of any such Prior Agreement), are hereby terminated and superseded and the Parties hereby mutually release each other from any claim, liability, or obligation under or arising from such Prior Agreements. Except as otherwise stated in this Agreement, such termination or release shall not affect any obligation of Customer to pay for Material Delivered or services furnished to Customer under a Prior Agreement for which Customer has not previously paid, nor shall such termination or release affect any limitation of liability, or confidentiality obligation, of either Party under any Prior Agreement. ARTICLE 15 TERMINATION AND SUSPENSION 15.1. Right to Terminate or Suspend. 15.1.1. In addition to any other rights it may have and subject to applicable law, a Party shall have the right, at no cost to such Party, to terminate or suspend this Agreement in whole or in part, by written notice to the other Party, in the event the other Party enters into any voluntary or involuntary receivership, bankruptcy or insolvency proceeding, with the exception of reorganization under Chapter 11 of the Federal Bankruptcy Act; provided, however, that in the case of an involuntary proceeding, the right to terminate or suspend shall arise only if the proceeding has not been dismissed within thirty (30) days of the initiation thereof. 15.1.2. Customer’s obligations under this Agreement to purchase HALEU shall be deemed suspended if Supplier’s right to Deliver HALEU expires or is suspended or terminated by any governmental authority having the power to take such action. The Parties shall promptly discuss the situation to clarify the extent and impact of the suspension of Customer’s obligations and to agree upon a date for resumption of Deliveries. If Supplier’s right to Deliver HALEU has not been restored within two hundred seventy (270) days following such expiration, suspension, or termination, Customer may terminate this Agreement, in whole or in part, upon written notice to Supplier, without liability for any undelivered quantities.
34 15.1.3. Supplier’s obligations under this Agreement to Deliver HALEU, or to accept or fill any Order or Withdrawal Notice, shall be deemed suspended if Customer’s right to take Delivery of HALEU expires or is suspended or terminated by any governmental authority having the power to take such action. The Parties shall promptly discuss the situation to clarify the extent and impact of the suspension of Supplier’s obligations and to agree upon a date for resumption of Deliveries. 15.1.4. If Supplier commits a material breach of this Agreement and such breach remains uncured for ninety (90) days after Customer provides Supplier with written notice specifying the breach in reasonable detail (a “Supplier Default”), Customer may, by written notice to Supplier, terminate this Agreement in whole or in part. Upon any such termination for Supplier Default: (a) Customer’s obligation to pay Shortfall Payments under Section 3.1.3.4 with respect to any Commitment Year in which the termination is effective, and any subsequent Commitment Year, shall immediately cease; (b) Customer shall have no liability for any undelivered quantities of Enriched Product for such Commitment Years; and (c) without limiting Customer’s other remedies, Supplier shall refund to Customer a pro rata portion of any prepayment made under Section 8.2 attributable to the terminated portion of this Agreement. For the avoidance of doubt, the relief provided in this Section 15.1.4 shall apply in addition to, and not in limitation of, any other remedies available to Customer at law or in equity. 15.2. Obligations Upon Termination, Suspension or Expiration. Supplier shall not be required to fill any Order pending or submitted on or after the effective date of any termination, suspension, or expiration of this Agreement. Customer shall Deliver Feed Material, and pay Supplier for HALEU or services (as listed in Supplier Service Charges) furnished in connection with Deliveries of HALEU completed before such date or commenced before such date and subsequently completed. Customer shall also pay for ongoing services (e.g., storage services), and for any services required to return Material to Customer pursuant to Section 15.3. 15.3. Return of Material. No later than fifteen (15) Business Days after the effective date of any termination or expiration of this Agreement, Customer shall give Supplier: 15.3.1. instructions for the Book Transfer of any Material at the Facility that is credited to the Feed Account to the account of one or more third parties with accounts on the books of Supplier, including the name of any such third party and the quantity and country of origin of the Feed Material for each such Book Transfer, and the date of any such
35 Book Transfer, which date shall be at least thirty (30) days but no more than sixty (60) days after Supplier’s receipt of such instructions; and 15.3.2. a proposed schedule of dates at least 180 days after the effective date of termination or expiration during which Customer shall take Physical Delivery at the Facility of any other Material at the Facility to which Customer holds title other than the Feed Material that is being Book Transferred pursuant to Section 15.3.1. 15.4. In the event Customer elects to take Physical Delivery of Material under Section 15.3, Customer shall pay for services provided by Supplier in connection therewith in accordance with Supplier Service Charges, and Customer’s obligations with respect to Hardware shall be governed by the provisions of Appendix D. The final date or dates for any Physical Delivery shall be subject to mutual agreement. 15.5. Pending Physical Delivery or Book Transfer of the Material under Section 15.3.1 or Section 15.3.2, Customer shall pay Supplier storage charges for any Material in the Feed Account or Product Account, or otherwise held by Supplier for Customer. 15.6. Customer shall be deemed to have waived any title or claim to or interest in any Material still in possession of Supplier or one of its Affiliates or suppliers one (1) year after such termination or expiration unless Customer’s failure to remove such Material from the accounts is excused under Article 10. ARTICLE 16 ASSIGNMENT 16.1. General. Except as provided in this Article 16, this Agreement shall not be assigned by either Party without the prior written consent of the other Party, which consent shall not be unreasonably withheld. 16.2. Permitted Assignments. Customer’s consent shall not be required for (a) an assignment of the right to receive any payment owed by Customer to Supplier hereunder, or any further assignment thereof, or to pledge this Agreement to a creditor in order to finance the operations of Supplier or its Affiliate, in whole or in part; or (b) an assignment by Supplier to an Affiliate of Supplier or to an entity that succeeds to substantially all of Supplier’s assets or its uranium enrichment business. Neither the disposition of Supplier’s stock or ownership interests nor the transfer of Supplier or its assets (whether in whole or
36 in part) by merger or otherwise, shall be construed as an assignment or otherwise require consent of Customer. 16.3. Successors. Subject to Sections 16.1 and 16.2, this Agreement shall be binding upon and shall inure to the benefit of the legal representatives, successors and permitted assigns of the Parties hereto. 16.4. Transfer of Reactors. Customer’s purchase obligations under this Agreement shall not be affected by the transfer of any of Customer’s (or its Affiliate’s) interests in, or operating licenses for, the Reactors, but those purchase obligations may be delegated to the transferee so long as Customer continues to guarantee those obligations. ARTICLE 17 CONFIDENTIALITY 17.1. Business Proprietary Information. Supplier and Customer shall treat this Agreement, its terms and conditions, and appendices, including all modifications, and all related communications as “Business Proprietary Information.” Supplier and Customer shall not disclose any part of such Business Proprietary Information to any other person or entity other than officers, directors, employees, and agents of Supplier and Customer, and accountants, bankers, and legal counsel acting on behalf of such Party (provided such accountants, bankers, and legal counsel have agreed in writing to maintain such Business Proprietary Information in confidence or are otherwise subject to an obligation of confidentiality that will provide at least the level of protection afforded by this Article 17), without the prior written consent of an authorized representative of the other Party to this Agreement (which consent shall not be unreasonably withheld), except as such disclosure may be required (a) by court order, subpoena, or other appropriate governmental or regulatory authority; (b) to fulfill obligations under this Agreement (including communications by either Party with Deconverters, transporters, or others concerning matters necessary to effect a Delivery of, or payment for, Material) or obligations under a Party’s agreements with financial institutions; or (c) to enforce either Party’s rights hereunder. If disclosure of Business Proprietary Information is required under item (a) in the preceding sentence, the disclosing Party shall (i) promptly notify the other Party of the requirement; (ii) take reasonable precautions to protect the confidentiality of the disclosed Business Proprietary Information; and (iii) make such further efforts as necessary to minimize or oppose the disclosure, if requested by the other Party. A Party may disclose Business Proprietary Information to a bank or financial institution from which such Party is seeking or obtaining financing without prior notification or consent, so long as such bank or institution is subject to the same or
37 substantially the same obligations of confidentiality as set forth herein. The fact that the Parties have entered into this Agreement and the term of this Agreement shall not be treated as Business Proprietary Information. 17.2. Applicability. The provisions of this Article are applicable to all officers, directors, employees, and agents of each Party. Each Party shall be responsible for ensuring the compliance with the terms hereof by all such officers, directors, employees, and agents. ARTICLE 18 DISPUTE RESOLUTION 18.1. Disputes. 18.1.1. Except for disputes and disagreements regarding the quality of Physically Delivered Material that are to be resolved under the applicable Appendices of this Agreement, (which procedures shall, to the fullest extent possible, be the sole means of resolving such disputes and disagreements), this Article 18 shall provide the exclusive means of resolving any other dispute, claim, controversy or failure to agree arising out of, relating to, or connected with this Agreement or the breach, termination, or validity thereof (a “Dispute”). 18.1.2. Either Party may invoke the provisions of this Article by giving written notice thereof to the other Party with a detailed description of the matters involved in the Dispute. The Parties shall use all reasonable efforts to settle disputes through negotiation between authorized members of each Party’s senior management. Either Party may, by written notice to the other Party, request a meeting to initiate negotiations to be held within ten (10) Business Days of the other Party’s receipt of such request, at a mutually agreed time and place. If the matter is not resolved within fifteen (15) Business Days of their first meeting (or no such meeting occurs), either Party may, by written notice to the other Party, refer the matter to mediation pursuant to Section 18.2. 18.2. Mediation. If either Party elects to refer the dispute to mediation, the Parties will cooperate in selecting a qualified neutral mediator selected from a panel of neutrals proposed by the International Chamber of Commerce, or any other mutually acceptable organization, within thirty (30) days after the request for mediation is made. Unless otherwise agreed, the mediation will be scheduled for a date not later than ninety (90) days after the selection of the mediator. The Parties agree to participate in the mediation in good faith and to share the costs of the mediation, including the mediator’s fee, equally, but such shared costs shall not include each Party’s own attorneys’ fees and
38 costs, which shall be borne solely by such Party. In the event no mediator is mutually appointed within thirty (30) days after the first request for mediation is made, either Party may seek other remedies as provided in Section 18.5. below 18.3. Qualification. Any mediator selected pursuant to Section 18.2 must have recognized expertise and not less than ten (10) years of experience in the subject matter of the dispute and must also be neutral and have no prior connection with or financial or other interests in or against either party. 18.4. Confidential Nature of Proceedings. All communications, offers and statements, whether oral or written, and documents and other writings exchanged between the Parties in connection with the management negotiations pursuant to Section 18.1 or the mediation pursuant to Section 18.2 shall be confidential and shall not be discoverable, admissible in evidence or used or referred to in any subsequent binding adjudicatory process between the Parties; provided, however, that evidence that is otherwise admissible or discoverable shall not be rendered inadmissible or non-discoverable as a result of its use in such negotiations. 18.5. Other Remedies. If the Parties have not resolved the dispute within twenty (20) Business Days following receipt of the dispute summaries, subject to the limitations in this Agreement, and except as otherwise provided in this Agreement, then the Parties may pursue all other rights available at law or in equity. 18.6. Exclusive Jurisdiction. If a dispute is not resolved within ninety (90) days after appointment of a mediator (or earlier termination of the mediation), either Party may bring suit in a court of competent jurisdiction. The Parties agree to exclude the mediator’s decision from evidence submitted in judicial proceedings, and documents and statements shared during mediation or negotiations shall not be admissible as evidence except to the extent otherwise discoverable under the applicable rule of discovery and civil procedure. To the extent that the Parties are permitted under this Article 18 or the Rules to pursue a judicial remedy, each Party consents and submits to (and waives any objection to) the personal and subject matter jurisdiction of and venue in the federal courts located in New York, New York (or, in case the federal court does not have jurisdiction, the state courts located in New York, New York), and waives any objection based on forum non conveniens or lack of personal jurisdiction. 18.7. Injunctive Relief. Notwithstanding the foregoing, either Party may seek urgent injunctive relief from any court of competent jurisdiction with respect to any disputed matter without following the dispute resolution procedure set forth in this Article 18.
39 ARTICLE 19 NOTICE AND ADDRESSES 19.1. Notices. 19.1.1. Any notice, request, demand, claim, or other communication related to this Agreement must be in writing and delivered by hand, registered mail (return receipt requested), overnight courier, or transmitted by electronic mail (email) if a confirming copy is promptly delivered to the other Party by one of the foregoing methods (or by first class mail) at the following addresses and numbers: Customer: Oklo Power SODI LLC 3190 Coronado Dr. Santa Clara, CA 95054 ATTENTION: Chad Cashin Phone: (650) 550-0127 Email address: chad@oklo.com Supplier: Centrus Energy Corporation 6901 Rockledge Drive, Suite 800 Bethesda, Maryland 20817 ATTENTION: Senior Vice President, Sales & Chief Marketing Officer Phone No: (301) 564-3402 Email: donelsonj@centrusenergy.com; cc: leej@centrusenergy.com Either Party may change its address or email address for receiving notices by giving written notice of such change to the other Party. 19.1.2. All notices, requests, demands, claims, and other communications hereunder shall be deemed given upon actual receipt thereof. 19.2. Designated Facilities. The Facility, expected to be deployed at Piketon, Ohio, shall be the Delivery point for all Physical Deliveries of cylinders and Material by either Party, unless Supplier notifies Customer at least ninety (90) days prior to such Physical Delivery that the Delivery point shall be a different location consistent with Section 6.1.
40 ARTICLE 20 ECONOMIC SANCTIONS 20.1. For purposes of this Section, “Economic Sanctions” means any economic sanction or trade restriction imposed by any rule, regulation or statute of the United Kingdom, the European Union, the United Nations, Canada or United States of America including, without limitation, those administered by the Office of Foreign Assets Control of the United States Treasury Department (“OFAC”) that is applicable to the performance of this Agreement according to the terms of such rule, regulation or statute. 20.2. Each Party shall ensure compliance with applicable laws and regulations pertaining to Economic Sanctions in connection with performance of this Agreement. 20.3. Neither Party shall take any action or make any omission that would result in a violation by the other Party of Economic Sanctions. 20.4. Notwithstanding anything to the contrary stated or implied in this Agreement, no provision of this Agreement shall be interpreted or applied so as to require a Party or any of its Affiliates to take, or to refrain from taking, any action in connection with this Agreement that would cause such Party or any of its Affiliates to violate or be subject to penalty under applicable laws and regulations of the United Kingdom, Canada, the European Union, the United Nations or United States of America (including U.S. laws restricting participation in or compliance with certain foreign boycotts, directly or indirectly (as contained in the U.S. Export Control Act of 2018 and the U.S. Internal Revenue Code) and the U.S. Foreign Corrupt Practices Act and Economic Sanctions). ARTICLE 21 SAFEGUARDS 21.1. Each Party shall, in carrying out its obligations and exercising its rights under this Agreement, comply in all respects with all laws as shall be from time to time applicable to any of (a) the Material Delivered hereunder and (b) this Agreement. 21.2. Without limiting the generality of Section 21.1, Customer covenants to the Supplier that the HALEU Delivered hereunder shall be used for peaceful non-explosive purposes only and not for the manufacture of nuclear weapons or other nuclear explosive devices and Customer shall impose the same requirement on any third party with which Customer enters into any arrangement, sale, swap, exchange or other transaction in respect of the said HALEU.
41 21.3. Without limiting the generality of Section 21.1 and 21.2, each Party covenants to the other that HALEU to be Delivered hereunder as well as products derived therefrom, while in the possession of the applicable Party in the European Union, shall be subject to the safeguards provisions of the Euratom Treaty and the relevant regulations of the Commission of the European Communities as well as related agreements entered into between the European Atomic Energy Community, the Member States and the International Atomic Energy Agency, if applicable. ARTICLE 22 NON-CIRCUMVENTION Neither Party has used or shall use Material Delivered hereunder in connection with any arrangement, sale, swap, exchange or other transaction circumventing or reasonably likely to circumvent the Suspension Agreement or procedures enacted from time to time by the U.S. government, including but not limited to, the United States Department of Commerce, for administering and enforcing limitations on the import, delivery, use or export of Russian uranium products (including HALEU) and each Party shall impose the same requirement on any third party with which that Party enters into any arrangement, sale, swap, exchange or other transaction in respect of the said uranium products. ARTICLE 23 GENERAL 23.1. Reports and Documentation. During the term of this Agreement, Supplier shall periodically provide Customer with reports that summarize Deliveries hereunder and the amounts of Material, if any, credited to the Feed and Product Accounts. 23.2. Governing Law. The Agreement, except for matters of taxation which are regulated by the tax law applicable to each Party, shall in all respects be governed by, and construed and interpreted in accordance with, the law of the State of New York (including, without limitation, New York’s implementation of the Uniform Commercial Code), without regard to principles of conflicts of laws thereunder (other than Sections 5-1401 and 5- 1402 of the New York General Obligations Law). The Parties expressly agree that the application of the United Nations Convention on Contracts for the International Sale of Goods is hereby excluded pursuant to Article 6 of the convention. 23.3. Captions and Headings of No Effect. The captions and headings in this Agreement are inserted for convenience only and shall not affect the interpretation or construction of this Agreement or any provision hereof.
42 23.4. Invalid or Unenforceable Provisions. If any provision of this Agreement is or becomes invalid or unenforceable, the remainder of this Agreement shall not be affected. Any provision of this Agreement that is prohibited or unenforceable in any jurisdiction shall, only as to such jurisdiction, be ineffective only to the extent of the prohibition or unenforceability. The Parties shall cooperate to negotiate mutually acceptable terms to replace any invalid or unenforceable provision. 23.5. No Waiver. The failure of either Party to enforce any of the provisions of this Agreement, or to require at any time strict performance by the other Party of any of the provisions hereof, shall in no way be construed to be a waiver of such provisions, nor in any way to affect the validity of this Agreement or any part hereof, or the right of such Party thereafter to enforce each and every such provision. 23.6. Contractors. 23.6.1. Supplier may fulfill its obligations under this Agreement through one or more contractors. No such contractor is authorized to modify the terms of this Agreement, waive any requirement hereof, or settle any claim or dispute arising hereunder. Supplier will be fully responsible for the actions and omissions of its contractors as though those actions and omissions were the actions and omissions of Supplier under this Agreement. 23.6.2. References in this Agreement to the liability of a Party for its negligence or intentional acts shall be deemed to include the negligence or intentional acts or omissions of the Party’s contractors or agents if, under applicable law, the Party would be vicariously liable for such acts or omissions. 23.7. Survival. This Article and the provisions set forth in Articles 1, 11, 12, 13, 14, 15, 17, 18, and 19 and Sections 3.1.3.4, 3.3, 8.4, and 23.10 shall survive termination or expiration of this Agreement. 23.8. Amendment. No modification, amendment, or waiver of any material right under this Agreement shall be effective unless it is in writing and signed by both Parties. Adjustments of Orders requested after the Order is submitted pursuant to Article 4 shall not be binding on Supplier unless confirmed in writing by Supplier. 23.9. Currency. The term “dollar” “US$”, or “$” in this Agreement means the U.S. dollar. All payments under this Agreement shall be in U.S. dollars.
43 23.10. Third-Party Beneficiary. Nothing in this Agreement shall be interpreted as creating any right of enforcement of any provision herein by any person or entity that is not a Party to this Agreement. 23.11. Anti-Corruption Compliance. Each Party represents and warrants that in the execution or performance of this Agreement, neither it nor any director, officer, parent, subsidiary or affiliate, employee, representative or agent of such Party or any other person or entity acting on its behalf (any of the foregoing for purposes of this Section 23.11 being an “Agent”) (at any time during which such person or entity was an Agent of such Party) has directly or indirectly, paid, promised or offered to pay, or authorized the payment of any money or anything of value, or shall, directly or indirectly, pay, promise or offer to pay, or authorize the payment of any money or anything of value, to: (a) an officer, employee, agent or representative of any government, including any department, agency or instrumentality of any government or any government-owned or government controlled entity or any person or entity acting in an official capacity on behalf thereof; or (b) a candidate for political office, any political party or any official of a political party; or (c) any other person or entity while knowing or having reason to believe that some portion or all of the payment or thing of value will be or has been, offered, given or promised, directly or indirectly, to any person or entity described in clause (a) or (b); in each case under clause (a), (b) or (c) above, for the purpose of improperly influencing any act or decision of such government official, political party, party official, or candidate in his, her or its official capacity, including a decision to do or omit to do any act in violation of the lawful duty of such person or entity, or inducing such person or entity to use his, her or its influence with the government or instrumentality thereof to affect or influence any act or decision in connection with this Agreement. 23.12. Binding Agreement. The person signing this Agreement for a Party represents that he or she is duly authorized to execute this Agreement on such Party’s behalf. 23.13. Reasonable Efforts and Consent. 23.13.1. When used in this Agreement (including in any amendment, supplemental agreement or correspondence between the Parties related to this Agreement) and unless specifically defined in another provisions of this Agreement, terms such as “best efforts,” “reasonable efforts,” and “commercially reasonable efforts” shall be deemed to mean efforts that are considered to be commercially reasonable under the circumstances prevailing at the time, taking into account the economic condition of the Party making such efforts; the information actually available to such Party at the time the efforts are made; the economic, legal and political circumstances prevailing
44 in the country where the efforts are made; and the internal resources and employees available to such Party to make such efforts. In no event shall it require a Party to undertake measures, which in its reasonable judgment, could materially jeopardize its ability to perform its other legal or contractual obligations to others (including to the other Party) or to comply with applicable law or regulations. 23.13.2. Where a Party must give its consent under this Agreement, such consent may not be unreasonably withheld or delayed unless the Agreement provides that such consent is at the sole discretion of such Party. 23.14. Execution and Counterparts. 23.14.1. This Agreement may be executed in multiple counterparts, which taken together shall constitute an original without the necessity of all parties signing the same page or the same documents and may be executed by signatures to electronically or telephonically transmitted counterparts in lieu of original printed or photocopied documents. Signatures transmitted electronically shall be considered original signatures. 23.14.2. Each Party agrees that any electronic signatures, whether digital or encrypted, of the Parties included in this Agreement are intended to authenticate this writing and to have the same force and effect as manual signatures to the extent permitted by applicable U.S. state and Federal law. IN WITNESS WHEREOF, the Parties hereto have caused this Agreement to be signed in two originals by their duly authorized officers as of the Effective Date. Oklo Power SODI LLC Centrus Energy Corporation By: /s/ Craig Bealmear By: /s/ John Donelson Name: Craig Bealmear Name: John Donelson Title: CFO Title: SVP – Sales and CMO
1 APPENDIX A: PLANNING DATA Submit the following information for the four-year period beginning July 1 of the Reporting Year: (a) Anticipated quantity of HALEU to be Delivered (b) Month of HALEU Delivery for Quarter 2 (April-June) and Quarter 4 (October- December) of the Delivery Year
1 APPENDIX B: INFORMATION FOR ORDERS The following information shall be included in each Order: (a) Requested Delivery Period and EP Delivery Date (if the Parties have agreed upon a Delivery of HALEU by Book Transfer); (b) The quantity of HALEU (in kgU) to be Delivered by Supplier; (c) The quantity (in kgU) and the country of origin of Feed Material to be Delivered by Customer, pursuant to the Feed Calculation Formula; (d) If applicable, the name of Deconverter to which Delivery will be made; and (e) Any request for sampling pursuant to Paragraph 2 of Appendix E or for observation of weighing and sampling pursuant to Paragraph 4 of Appendix E. NOTE: If country of origin for Feed Material is not known at the time the Order is submitted, it must be supplied not later than the Feed Delivery Date.
1 APPENDIX C: FEED CALCULATION FORMULA 1. Feed Material, or natural uranium feed per unit of product (feed factor): where F = Feed Component per unit of Enriched Product Xp = HALEU Assay (weight % 235U) Xw = Tails Assay (weight % 235U) Xf = Feed Material Assay 2. Separative work per unit of product (SWU factor): SWU Factor = where Xp, Xw, and Xf are defined above ln = natural logarithm (base e) 3. The weight percents (“weight %”) must be converted to decimal fractions for use in the separative work equations. These formulas can be generalized to multiple Feed Material Assays and Enriched Product Assays. 4. For the application of the above formulas: o Uranium quantity is expressed in kilograms of uranium as UF6, rounded to the gram (second decimal place). o Assay expressed in % is rounded to the fourth significant figure. o Intermediate calculations are carried to at least eight significant figures. o Feed and SWU factors are rounded to the third decimal place. (The SWU factor is calculated at eight decimal places and then rounded to the third decimal place.) o Separative work expressed in kilograms SWU, is rounded to the third decimal place (1/1000 Kg SWU). o Rounding is done by the standard rounding procedure. !"#"$"#"%"&"!"#$#"%"'"( F*F+ !"#"$"%"" #"&"# #"&"#"&"!"#"$"%"" #"&"# #"&"#"'"!"#"$""% ( )( )* ) )( (* * !"# !$$%$#$"$$!$&$'$($'!%$) !"
2 APPENDIX D: HARDWARE 1. Obligation To Provide Hardware. (a) Except as provided herein, Customer shall supply the Hardware necessary for Delivery of Feed Material to Supplier. Customer may comply with this obligation through its other suppliers provided they comply with this Appendix D. (b) For Feed Material: The Hardware holding Feed Material Delivered to Supplier by Customer or its Feed Material supplier, shall remain the property of Customer or the Feed Material supplier while in Supplier’s possession and shall be returned to Customer or the Feed Material on dates to be mutually agreed between Customer and Supplier after the Feed Material has been emptied from the Hardware. Supplier shall not be responsible for cleaning or certifying Hardware and any heels material left in the Cylinder after emptying shall not be credited against the Feed Material that Customer is obligated to provide to Supplier for HALEU. (c) As used in this Agreement, the term “Hardware” shall have the meaning ascribed to that term in Article 1. 2. Return of Hardware. (a) Supplier shall empty and return the Hardware in which Feed Material was Delivered to Supplier as soon as reasonably practicable, Ex Works Facility (Incoterms® 2020). (b) Customer shall ensure that Deconverter or other service provider receiving the HALEU, promptly empties the Hardware and returns them to Supplier, D.D.P. (Incoterms® 2020), at the Deconversion Facility. (c) A Party returning Hardware shall not be responsible for cleaning of the Hardware except as may be required to comply with Paragraph 6 of Appendix E. 3. Heels. Any Material remaining in a cylinder after emptying (such remaining Material, a “heel”) shall, upon return of the empty cylinder, become the property of the Party who supplied the cylinders, without credit or payment therefor to the other Party. 4. Specifications. The Customer or its subsupplier shall be responsible to ensure that the Hardware fully complies with all applicable regulatory specifications and requirements as to safety, design criteria, cleanliness, and freedom from contamination in effect at the time furnished,
3 utilized, or returned, as the case may be, and shall conform to the requirements described in USEC-651 (Rev. 10) (Uranium Hexafluoride: A Manual of Good Handling Practices) or any successor publication or revision thereof provided to Customer. 5. Responsibility for Loss or Damage. A Party (or a Party’s agent, representative or supplier) receiving Hardware from the other Party either directly (or from other Party’s other suppliers) shall bear the risk of loss or damage to Hardware for so long as such Hardware is in the possession of (a) the Receiver, (b) the Receiver agent or representative, or (c) a third party receiving the Hardware for the Receiver (which shall include, in the case of HALEU Delivered to a Customer, the Deconverter.) However, claims under this Paragraph 5 with respect to loss or damage to such Hardware may only be made by a Party, so that any claims regarding Hardware provided by an agent, representative or supplier of a Party shall only be made by the Party on whose behalf the agent, representative or supplier provided the Hardware. 6. Decontamination. Whenever Hardware fails to meet the requirements of this Appendix, the Party who supplied the Hardware, either directly or through an agent, representative or subsupplier, shall reimburse the Receiver for the cost of cleaning and decontaminating (a) the Hardware, (b) the means of transportation, such as railroad cars, trucks, or other shipping vehicles, that transported the Hardware or the receiving Party’s unloading area and machinery to the extent such cleaning and/or decontamination are necessary to protect health and safety, minimize property damage, and/or meet applicable legal or regulatory requirements.
1 APPENDIX E: SAMPLING, ACCEPTANCE, AND DISAGREEMENTS 1. Statement of Quantities and Properties. With each Physical Delivery of Material, the Shipper shall furnish the Receiver with a statement of the quantities, properties, and country of origin of the Material Physically Delivered by the Shipper (the “Statement”). Such Statement shall include the gross weight of the cylinder and net weight of the Material it contains, and may be provided in the form of the DOE/NRC Form 741 or any successor thereto. 2. Official Samples. Supplier shall sample Material Physically Delivered in accordance with Supplier’s procedures as described in USEC-651 (Rev.10) (Uranium Hexafluoride: A Manual of Good Handling Practices) or any successor publication or revision thereof provided to Customer. Supplier shall also perform any reasonable, additional sampling services on Material Physically Delivered requested by Customer in its Order or Withdrawal Notice, subject to reimbursement by Customer for any costs incurred by Supplier in performing such services. Samples of Material taken by Supplier in accordance with Supplier’s procedures shall be the official samples (the “Official Samples”) and shall be binding upon Supplier, Customer, and any umpire selected by the Parties. The amount of HALEU in any samples that are taken by Supplier shall be paid for by Customer at the prices established for HALEU under this Agreement. 3. Weight. (a) Supplier shall determine the gross weight of all filled cylinders, the empty gross weight of all empty cylinders, and the net weight of all Material Physically Delivered by or to Supplier using Supplier’s weighing procedures and equipment. For purposes of this Appendix, “net weight” shall mean the difference between the gross weight of a cylinder filled with Material and the empty gross weight of such cylinder. The empty gross weight shall mean the weight of the cylinder after it has been emptied, but including any Material left in the cylinder after emptying (“heels”). Supplier’s gross weight determination shall be final unless the gross weight determined by Customer (or Fabricator, if Supplier Physically Delivers such cylinder to Fabricator) differs from Supplier’s gross weight determination by more than the “Applicable Dispute Limit”, which shall mean, in the case of a 5B or 30B cylinder containing Feed Material, a difference of greater than +0.5% from the gross weight determined by Supplier; provided, that Customer notifies Supplier of such discrepancy prior to Acceptance of the Material. (b) The Parties shall follow the check-weight procedures in Paragraph 8 of this Appendix E in resolving such disputes, and the resolution of such disputes in accordance with Paragraph 8 shall be final and binding on the Parties. Notwithstanding the existence of a discrepancy in gross weight or a dispute concerning such discrepancy, Supplier’s gross weight determination shall be final and binding on the Parties if Customer or its agent (including
2 Deconverter) breaks the seal on, or evacuates any of the Material from, the disputed cylinder prior to resolution of the discrepancy or Supplier’s agreement to accept Customer’s (or Deconverter’s) gross weight determination. 4. Observation of Weighing and Sampling. If requested in Customer’s Order or Withdrawal Notice, Customer shall be given an opportunity to observe, at Customer’s expense, (a) the weighing of any cylinder pursuant to Paragraph 3 of this Appendix, and (b) the taking of Official Samples (if any) by Supplier pursuant to Paragraph 2 of this Appendix. Supplier shall notify Customer of the date(s) and place(s) for observing such events at least fifteen (15) calendar days in advance. 5. Acceptance. (a) “Acceptance” or “Accepted” shall mean agreement by the Receiver that (i) the Statement is correct and (ii) the Material received is Conforming Material. Acceptance shall be deemed to have occurred in the event: (i) the Receiver fails to notify the Shipper of its disagreement with the Statement, or that the Material is not Conforming Material, within forty-five (45) days after the later of (a) taking Physical Delivery of the Material and (b) receipt of the Statement; or (ii) the Receiver uses, commingles, or otherwise disposes of such Material, except to the extent necessary for storage or protection against health and safety hazards; or (iii) an umpire determines (or the Parties agree) that the Parties must accept the Statement is correct and that the Material is Conforming Material. (b) The Receiver’s right to reject Material shall terminate upon Acceptance of such Material. 6. Rejection and Replacement. (a) If the Receiver disagrees with the Statement (other than net weight, which shall be finally determined by Supplier under Paragraph 3 of this Appendix) or determines that the Material is not Conforming Material, the Receiver may, prior to Acceptance, notify the Shipper of its disagreement, including the measurements and analytical data supporting the Receiver’s position (Receiver’s notice being referred to herein as a “Rejection Notification”), and, subject to resolution of such disagreement, require the Shipper to replace the Material with Conforming
3 Material, or in the case of an alleged shortage in quantity, to Deliver the shortfall. The Shipper shall make such replacement or additions as soon as practicable, but in no event later than one hundred twenty (120) days (if the Shipper must Deliver replacement or additional Material of a specific assay) after the later of the date on which the Shipper receives the Rejection Notification, or final resolution of any dispute of the Rejection Notification under Paragraph 7 of this Appendix. (b) No later than ten (10) Business Days after receipt of the Rejection Notification, the Shipper shall elect to either (i) remove the rejected Material (in which case it will do so within ninety (90) days) or provide the Receiver with instructions for its disposition; or (ii) notify the Receiver that it chooses to dispute the Rejection Notification. If the Shipper disputes the Rejection Notification, and such dispute is resolved in favor of the Receiver, the Shipper shall elect between removal or disposal no later than ten (10) Business Days after final resolution of such dispute. The Receiver shall use its reasonable efforts to assist the Shipper in effecting such removal or other disposition, including Physically Delivering the Material to the Shipper, FCA Facility, at the Shipper’s expense. (c) Title to, and risk of loss of, Material that is rejected by Receiver pursuant to this Section shall pass to Shipper upon the later of (i) ten (10) Business Days after Shipper’s receipt of Receiver’s Rejection Notification, or (ii) if Shipper disputes such Rejection Notification hereunder, a final resolution of such dispute that requires Shipper to accept the measurements that are the basis for such Rejection Notification. Title to and risk of loss of replacement or additional Material Delivered pursuant to this Section shall pass to Receiver upon completion of Physical Delivery or Book Transfer of such Material. (d) If necessary to meet the requirements of Paragraph 6(a), Shipper shall be permitted to use substitute cylinders. However, if the Receiver wishes Shipper to use the same cylinders in which the defective Material was Delivered, Receiver shall notify Shipper of its wishes at the time the defective Material is returned to Shipper and shall grant Shipper a reasonable amount of additional time to empty, clean and refill such cylinders. If the defect in Material can be corrected through a means other than replacement of the defective Material, Shipper may utilize such means. The procedures set forth in Paragraph 7 apply only to a dispute regarding a Rejection Notification submitted prior to Acceptance. The procedures in Paragraph 8 shall apply to weight disputes. All other disputes shall be subject to Article 18. 7. Resolution of Disputed Rejection Notification.
4 (a) If a dispute of a Rejection Notification is not resolved by mutual agreement within ten (10) Business Days following submission of such Rejection Notification, the applicable Official Sample(s) shall be submitted to a mutually agreed upon umpire for analysis. The umpire’s results shall be conclusive on both Parties if such results are within the range determined by both Parties’ results. If the umpire’s results are outside the range determined by the Parties’ results, the Parties shall accept the results of the Party that are nearest to the umpire’s results. (b) The Shipper shall pay the umpire cost if the umpire’s result upholds the Rejection Notification; otherwise, the Receiver shall pay the umpire cost. As used in this Section, the phrase “umpire cost” means the umpire’s charges, plus the additional cost, if any, of the packaging, handling, and transporting of the Official Sample to and from the umpire. 8. Resolution of Weight Disputes. If, in accordance with Paragraph 3 of this Appendix E, Customer notifies Supplier that the gross weight of a filled cylinder Physically Delivered by Supplier differs by more than the Applicable Dispute Limit (as defined in Paragraph 3) from the gross weight determined by Supplier, then, if the discrepancy cannot be resolved by mutual agreement within fifteen (15) days after Supplier receives Customer’s notification, Customer shall arrange for a separate check weighing to determine the gross weight of the filled cylinder. Supplier shall have the right to witness the check weighing. Customer shall give Supplier at least fifteen (15) calendar days’ notice of the time and place for the check weighing. The check weighing shall be conducted on calibrated scales and weighing machines properly certified for such purpose. The check weighing procedure shall be as follows: (a) All cylinders and/or weights shall be first removed from the scales, and the scales shall be zero-checked. (b) A mutually agreed standard weight shall then be placed on the scales in order to verify their accuracy. If the indicated weight of the standard weight differs from its known weight by more than + 0.5%, the scales shall be recalibrated. (c) The cylinder to be check-weighed shall be examined to ensure that the valve protector and other removable items have been removed and then it shall be reweighed. The results of the reweighing shall be defined as the “Check Weight.”
5 (d) If the Check Weight and Supplier’s gross weight determination differ by an amount equal to or less than the Applicable Dispute Limit, Supplier’s gross weight determination shall be binding. (e) If the Check Weight and Supplier’s original gross weight differ by more than the Applicable Dispute Limit, the Check Weight shall be binding. (f) Any costs incurred in connection with this check weighing procedure shall be borne by (i) Customer if Supplier’s gross weight determination is binding, and (ii) Supplier in all other cases. (g) If, as a result of the check weighing, it is determined that there is a shortfall in quantity Delivered by Supplier, Customer may elect to: (i) receive a credit against any pending invoice that includes charges for the undelivered Material (this option (ii) shall apply only to shortfalls in Deliveries pursuant to an Order); or (ii) receive a credit against the next invoice issued by Supplier to Customer; or (iii) pursue such alternative measures as the Parties may agree. Neither Customer nor any party acting on its behalf shall evacuate or break the seal of a cylinder which is the subject of a dispute concerning gross weight until all discrepancies concerning weight are resolved.
1 APPENDIX F: PHYSICAL DELIVERY OF FEED MATERIAL Feed Material Physically Delivered by Customer to Supplier pursuant to Article 5 shall be subject to the terms of this Agreement and the following conditions: 1. Customer shall provide the following information with respect to the Feed Material provided for an Order ninety (90) days prior to submitting such Order: (a) the quantity (kgU) of the Feed Material to be supplied; (b) the date on which the Feed Material will be Delivered to Supplier; (c) if Customer elects to witness sampling of the Feed Material pursuant to Paragraph 6 below, the name of the agent who will be or provide the witness; and (d) the country of origin and Obligation Code of the Feed Material. 2. Customer shall ensure that all Feed Material Delivered to Supplier conforms to the specification in Section 1.27. 3. Customer shall Physically Deliver Feed Material D.D.P. Facility (Incoterms® 2020). 4. Customer shall ensure that Physical Delivery of Feed Material is completed no earlier than 180 days, and no later than 120 days, prior to the first day of the Delivery Period specified in the Order or as otherwise mutually agreed. 5. Unless otherwise agreed by the Parties, the term “Feed Delivery Date” in the Agreement shall mean 120 days prior to the first day of the Delivery Period specified in the Order or as otherwise mutually agreed. 6. Following Physical Delivery, Feed Material shall be credited to the Feed Account, pending acceptance and use in connection with Customer’s Order. 7. Customer shall provide three (3) samples from each filled cylinder of Feed Material at least thirty (30) days prior to the date on which the Feed Material is to be Physically Delivered to Supplier. Customer shall provide samples from the actual cylinders provided to Supplier (i.e., daughter cylinders) and such samples shall be witnessed by an individual acceptable to Supplier who has been certified by the NRC as qualified to witness sampling. Samples of Feed Material taken by Customer shall be the Official Samples and shall be binding upon Supplier, Customer,
2 and any umpire for purposes of resolving disputes under Paragraph 7 of Appendix E. Supplier shall give Customer credit for the quantity of Material included in each Official Sample for purposes of determining the quantity of Feed Material Delivered by Customer for an Order. 8. In accordance with Paragraph 1 of Appendix E, Customer shall provide a Statement for all Feed Material Physically Delivered pursuant to this Appendix. If within ninety (90) days after the later of (a) Physical Delivery of the Enriched Feed or (b) Supplier’s receipt of the Statement with respect to such Feed Material, Supplier concludes that the Feed Material supplied for an Order is not Conforming Material, it shall notify Customer (the “Feed Rejection Notification”). Upon receipt of the Feed Rejection Notification, the terms of Paragraphs 6 and 7 of Appendix E shall apply. 9. Customer’s dispute of a Feed Rejection Notification shall not entitle Customer to delay payment of any outstanding invoices, but Supplier shall refund any invoice amounts paid due to Supplier’s rejection of the Feed Material, if Supplier Accepts, or, as the result of a final resolution of the dispute under Paragraph 7 of Appendix E, is deemed to have Accepted, the Feed Material. Any refund shall bear interest calculated using a daily interest rate based upon the annual interest rate used for calculating late payment charges under Section 8.5.4, for the period from Supplier’s receipt of the refunded payment until the date payment of the refund by Supplier is made. 10. Customer shall take Physical Delivery of rejected Feed Material, Ex Works Facility (Incoterms® 2020), within the time frame set forth in Paragraph 6 of Appendix E. Feed Material rejected by Supplier shall be returned to Customer at Customer’s risk and expense. 11. Supplier’s determination of the gross and net weights of the Feed Material Physically Delivered to Supplier shall be binding on the Parties, unless the difference between the weight determined by Supplier and the weight determined by or for Customer differs by more than the Applicable Dispute Limit (as defined in Appendix E). If the gross weight difference exceeds the Applicable Dispute Limit, the Parties shall resolve the dispute using the procedure described in Paragraph 8 of Appendix E, except that: (a) Supplier shall conduct the check-weighing; and (b) the remedy for any shortfall in the quantity Delivered that is identified as a result of the check-weighing shall be Delivery by Customer of a quantity of Feed Material equal to the shortfall. 12. In the event of an inconsistency between this Appendix and the Agreement (including any other Appendix thereto) with respect to Feed Material, this Appendix shall control.
3
1 APPENDIX G: FEED VALUE FORMULA 1. A market available price for one kgU of Feed Material shall be the natural uranium value of that kgU calculated under Paragraph 2. 2. The natural uranium value is calculated using the following formula: VUnat = CUnat x PUnat, where CUnat = the natural uranium UF6 component of the Feed Material, as calculated in Appendix C; and PUnat = a price per kgU of natural uranium in the form of UF6, consisting of the simple arithmetic average of the following price indicators and values published for the three (3) months ending prior to the Feed Delivery Date: (i) the month-end UF6 spot “NA Value” published by Ux Consulting Company, LLC in Ux Weekly; (ii) the month-end “UF6 Value” market value published by TradeTech, LLC in Nuclear Market Review; and Notes: i. If a price indicator or value listed in this Appendix G is not discontinued but is not published in the month prior to the Feed Delivery Date, the value calculated with such indicator or value shall be determined using the indicator or value published two months prior to the Feed Delivery Date. However, a value or indicator that also is not published two months prior to the Feed Delivery Date shall be considered to be discontinued. ii. If a price indicator or value listed in this Appendix G is replaced by the publisher with another indicator or value that the publisher claims is the successor indicator or value, such successor indicator or value shall be used as the replacement. iii. If publication of a price indicator or value listed in this Appendix G is discontinued without being replaced by an indicator or value that is published as the successor of such indicator or value, any formula in this Appendix G employing such price indicator or value shall be calculated using the remaining price indicator or value pending agreement on an indicator, price or other value to replace the discontinued price indicator or value.
2 iv. If all price indicators and values used to calculate a value in this Appendix G are discontinued and not replaced by mutual agreement of the Parties, another formula for calculating such value shall be proposed by Centrus and such proposal shall become the new formula for that value unless, within thirty (30) days after receiving Centrus’s proposal, Customer proposes a different formula that Customer believes is more likely to produce a very similar result as the formula previously used to calculate the value, in which case the Parties shall mutually agree upon a new formula. If the Parties are unable to agree, the disagreement shall be resolved under Article 18. v. Absent any substantial changes in the methodology of its determination and/or its nature or scope, the fact that a price indicator or value has merely been renamed shall not be deemed to be the discontinuation of such price indicator or value unless the publisher indicates that such renamed indicator or value is not intended to be a successor.