TPCS 8-K
Techprecision Corp (TPCS)
UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, DC 20549
FORM
CURRENT REPORT
Pursuant to Section 13 OR 15(d) of the Securities and Exchange Act of 1934
Date of Report (Date of earliest event reported):
(Exact Name of Registrant as Specified in Charter)
(State or Other Jurisdiction of Incorporation or Organization) |
(Commission File Number) | (IRS Employer Identification No.) |
(Address of principal executive offices) (Zip Code)
Registrant's telephone number, including area
code: (
Securities registered or to be registered pursuant to Section 12(b) of the Act:
| Title of each class | Trading Symbol(s) | Name of each
exchange on which registered | ||
Check the appropriate box below if the Form 8-K filing is intended to simultaneously satisfy the filing obligation of the registrant under any of the following provisions:
Written communications pursuant to Rule 425 under the Securities Act (17 CFR 230.425) | |
Soliciting material pursuant to Rule 14a-12 under the Exchange Act (17 CFR 240.14a-12) | |
Pre-commencement communications pursuant to Rule 14d-2(b) under the Exchange Act (17 CFR 240.14d-2(b)) | |
Pre-commencement communications pursuant to Rule 13e-4(c) under the Exchange Act (17 CFR 240.13e-4(c)) |
Indicate by check mark whether the registrant is an emerging growth company as defined in Rule 405 of the Securities Act of 1933 (§230.405 of this chapter) or Rule 12b-2 of the Securities Exchange Act of 1934 (§240.12b-2 of this chapter).
Emerging growth company
If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐
| Item 2.02 | Results of Operations and Financial Condition. |
On August 13, 2026, TechPrecision Corporation issued a press release announcing its financial results for the three months ended June 30, 2026. A copy of the press release is furnished as Exhibit 99.1 to this Current Report on Form 8-K and is incorporated herein by reference. The information in this Item 2.02 of Form 8-K and Exhibit 99.1 attached hereto shall not be deemed “filed” for purposes of Section 18 of the Securities Exchange Act of 1934, as amended, or otherwise subject to the liabilities of that section, nor shall it be deemed incorporated by reference in any filing under the Securities Act of 1933, as amended, except as shall be expressly set forth by specific reference.
| Item 9.01 | Financial Statements and Exhibits. |
| (d) | Exhibits |
| Exhibit Number |
Description | |
| 99.1 | Press Release dated August 13, 2026 | |
| 104 | Cover Page Interactive Data File (the cover page XBRL tags are embedded within the inline XBRL document) |
SIGNATURES
Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned hereunto duly authorized.
| TECHPRECISION CORPORATION | ||
| Date: August 13, 2026 | By: | /s/ Phillip E. Podgorski |
| Name: | Phillip E. Podgorski | |
| Title: | Chief Financial Officer | |
Exhibit 99.1
| Company Contact: | Investor Relations Contact: |
| Phillip Podgorski | Hayden IR |
| Chief Financial Officer | Brett Maas |
| TechPrecision Corporation | Phone: 646-536-7331 |
| Phone: 978-874-0591 | Email: [email protected] |
| Email: [email protected] | Website: www.haydenir.com |
| Website: www.TechPrecision.com |
FOR IMMEDIATE RELEASE
TechPrecision Corporation Reports Fiscal Year 2027 First Quarter Financial Results
Consolidated Revenue and Gross Profit increased by 23% and 36%, respectively.
Westminster, MA – August 13, 2026 – TechPrecision Corporation (NASDAQ: TPCS) (“TechPrecision” or “the Company”), a custom manufacturer of precision, large-scale fabrication components and precision, large-scale machined metal structural components, today reported financial results for the first quarter of fiscal year 2027, or three months ended June 30, 2026. The components that we manufacture are customer designed and sold to customers in the defense and precision industrial markets. We have two wholly owned subsidiaries that are each reportable segments, Ranor and Stadco.
Management will host a conference call on Thursday, August 13, 2026, at 4.30 p.m. ET, to discuss our financial results for the first quarter of fiscal year 2027.
“For the first quarter of fiscal year 2027 the Company reported consolidated revenue of $9.1 million or 23% higher than the same period a year ago. Consolidated gross profit was $1.4 million or 36% higher than the same period a year ago. Our Ranor segment executed on a favorable customer and project mix as revenue and gross profit increased by 27% and 4%, respectively” stated Alexander Shen, TechPrecision’s Chief Executive Officer. “Our Stadco segment executed on its strategic project mix change and revenue increased by 22%, and Stadco losses narrowed as cost of revenue was virtually unchanged from the same period a year ago.”
“As a result of the favorable customer and project mix at both segments, our net loss decreased by $0.4 million with equal EBITDA improvement,” stated Alexander Shen, TechPrecision’s Chief Executive Officer.
“Customer confidence remains high with our funded backlog reaching $52.7 million as of June 30, 2026, with approximately $22 million of additional unfunded purchase orders,” Mr. Shen continued. “We expect to deliver this backlog over the next one to three fiscal years with expectations for gross margin improvement throughout the period.”
“For the remainder of fiscal 2027, the Company remains on track to deliver double-digit revenue growth and resulting EBITDA as we continue to execute on the strategic customer and project mix plan,” stated Alexander Shen, TechPrecision’s Chief Executive Officer. The Company is holding to its FY 2027 guidance of Revenue growth of +10% to $35.0M - $37.0M and EBITDA growth of +80% to $3.0M-$4.0M.
The following summary compares the three months ended June 30, 2026 to the same prior year period:
Consolidated Financial Results - Three Months Ended June 30, 2026
| · | Revenue was $9.1 million, a 23% increase on a favorable customer and project mix at both segments. |
| · | Cost of revenue was $7.7 million, or a 21% increase in line with segment revenue growth. |
| · | Gross profit was $1.4 million, an increase of 36% primarily on higher revenue at both segments. |
| · | SG&A decreased by 3% primarily on a decrease in professional fees and office costs. |
| · | Operating loss was $45,000, a 90% improvement due primarily to the higher margin drop-through. |
| · | Interest expense decreased 21%, due to lower interest costs incurred on loans. |
| · | Net loss was $0.2 million, compared with net loss of $0.6 million in the same period a year ago. |
Financial Position
On June 30, 2026, and March 31, 2026, the Company had approximately $0.3 million and $0.4 million in cash, respectively. Working capital was negative $46,000 and total debt was $5.0 million on June 30, 2026. Working capital was negative $0.4 million on March 31, 2026, and debt totaled $7.0 million. Negative working capital reflects required classification of all debt obligations as current due to certain debt covenant violations.
Conference Call
The Company will hold a conference call at 4:30 p.m. Eastern (U.S.) time on Thursday, August 13, 2026. To participate in the live conference call, please dial 1-888-506-0062 five to 10 minutes prior to the scheduled conference call time. International callers should dial 1-973-528-0011. When prompted, reference TechPrecision and enter code 723051.
A replay will be available until August 27, 2026. To access the replay, dial 1-877-481-4010 or 1-919-882-2331. When prompted, enter Conference Passcode 54397.
The call will also be available over the Internet and accessible at: https://www.webcaster5.com/Webcast/Page/2198/54397.
About TechPrecision Corporation
TechPrecision Corporation, through its wholly owned subsidiaries, Ranor, Inc. and Stadco, is a custom manufacturer of precision, large-scale fabrication components and precision, large-scale machined metal structural components. The manufacturing operations of our Ranor subsidiary are situated on approximately 65 acres in North Central Massachusetts. Leveraging our 145,000 square foot facilities, Ranor provides a full range of custom solutions to transform material into precision finished welded components and precision finished machined components up to 100 tons: manufacturing engineering, materials management and traceability, high-precision heavy fabrication (in-house fabrication operations include cutting, press and roll forming, welding, heat treating, assembly, blasting and painting), heavy high-precision machining (in-house machining operations include CNC programming, finishing, and assembly), QC inspection including portable CMM, NonDestructive Testing, and final packaging.
All manufacturing at Ranor is performed in accordance with customer requirements. Ranor is an ISO 9001:2015 certificate holder. Ranor is a US defense-centric company with over 95% of its revenue in the defense sector. Ranor is registered and compliant with ITAR.
The manufacturing operations of our Stadco subsidiary are situated in an industrial self-contained multi-building complex comprised of approximately 183,000 square feet under roof in Los Angeles, California. Stadco manufactures large mission-critical components on several high-profile military aircraft, military helicopter, and military space programs. Stadco has been a critical supplier to a blue-chip customer base that includes some of the largest OEMs and prime contractors in the defense and aerospace industries. Stadco also manufactures tooling, molds, fixtures, jigs and dies used in the production of defense-centric aircraft components.
Our Stadco subsidiary, similar to Ranor, provides a full range of custom solutions: manufacturing engineering, materials management and traceability, high-precision fabrication (in-house fabrication operations include waterjet cutting, press forming, welding, and assembly) and high-precision machining (in-house machining operations include CNC programming, finishing, and assembly), QC inspection including both fixed and portable CMM NonDestructive Testing, and final packaging. In addition, Stadco features a large electron beam welding cell, and two NonDestructive Testing work cells, a unique mission-critical technology set.
All manufacturing at Stadco is performed in accordance with customer requirements. Stadco is an AS 9100 D and ISO 9001:2015 certificate holder and a NADCAP NonDestructive Testing certificate holder. Stadco is a US defense-centric company with over 95% of its revenue in the defense sector. Stadco is registered and compliant with ITAR.
To learn more about the Company, please visit the corporate website at http://www.techprecision.com. Information on the Company's website or any other website does not constitute a part of this press release.
Safe Harbor Statement
This release contains certain “forward-looking statements” relating to the business of the Company and its subsidiary companies. All statements other than statements of current or historical fact contained in this press release, including statements that express our intentions, plans, objectives, beliefs, expectations, strategies, predictions or any other statements relating to our future activities or other future events or conditions are forward-looking statements. The words “anticipate,” “believe,” “continue,” “could,” “estimate,” “expect,” “intend,” “may,” “plan,” “predict,” “project,” “prospects,” “will,” “should,” “would” and similar expressions, as they relate to us, are intended to identify forward-looking statements. These statements are based on current expectations, estimates and projections made by management about our business, our industry and other conditions affecting our financial condition, results of operations or business prospects. These statements are not guarantees of future performance and involve risks, uncertainties and assumptions that are difficult to predict. Therefore, actual outcomes and results may differ materially from what is expressed or forecasted in, or implied by, the forward-looking statements due to numerous risks and uncertainties. Factors that could cause such outcomes and results to differ include, but are not limited to, risks and uncertainties arising from: our reliance on individual purchase orders, rather than long-term contracts, to generate revenue; our ability to balance the composition of our revenues and effectively control operating expenses; external factors that may be outside our control, including health emergencies, like epidemics or pandemics, geopolitical conflicts, price inflation, interest rate increases and supply chain disruptions; the availability of appropriate financing facilities impacting our operations, financial condition and/or liquidity; our ability to receive contract awards through competitive bidding processes; our ability to maintain standards to enable us to manufacture products to exacting specifications; our ability to enter new markets for our services; our reliance on a small number of customers for a significant percentage of our business; competitive pressures in the markets we serve; changes in the availability or cost of raw materials and energy for our production facilities; restrictions in our ability to operate our business due to our outstanding indebtedness; government tariffs, regulations and requirements; pricing and business development difficulties; changes in government spending on national defense; our ability to make acquisitions and successfully integrate those acquisitions with our business; our failure to maintain effective internal controls over financial reporting; general industry and market conditions and growth rates; and other risks discussed in the Company’s periodic reports that are filed with the Securities and Exchange Commission and available on its website (www.sec.gov). Any forward-looking statements speak only as of the date on which they are made, and we undertake no obligation to publicly update or revise any forward-looking statements to reflect events or circumstances that may arise after the date of this press release, except as required by applicable law. Investors should evaluate any statements made by us in light of these important factors.
TECHPRECISION CORPORATION
CONDENSED CONSOLIDATED BALANCE SHEETS
(Unaudited) June 30, | March 31, | |||||||
| (dollars in thousands, except share and per share data) | 2026 | 2026 | ||||||
| ASSETS | ||||||||
| Current assets: | ||||||||
| Cash | $ | 279 | $ | 431 | ||||
| Accounts receivable | 3,073 | 2,488 | ||||||
| Contract assets | 10,400 | 10,808 | ||||||
| Raw materials | 2,025 | 1,927 | ||||||
| Work-in-process | 1,155 | 1,027 | ||||||
| Other current assets | 396 | 1,045 | ||||||
| Total current assets | 17,328 | 17,726 | ||||||
| Property, plant and equipment, net | 10,382 | 10,874 | ||||||
| Right of use asset, net | 3,407 | 3,550 | ||||||
| Other noncurrent assets | 122 | 122 | ||||||
| Total assets | $ | 31,239 | $ | 32,272 | ||||
| LIABILITIES AND STOCKHOLDERS’ EQUITY: | ||||||||
| Current liabilities: | ||||||||
| Accounts payable | $ | 3,452 | $ | 2,415 | ||||
| Accrued expenses | 4,022 | 3,868 | ||||||
| Income taxes payable | 31 | 31 | ||||||
| Contract liabilities | 2,935 | 2,917 | ||||||
| Customer deposits | 1,252 | 1,252 | ||||||
| Current portion of long-term lease liability | 817 | 800 | ||||||
| Current portion of long-term debt, net | 4,865 | 6,884 | ||||||
| Total current liabilities | 17,374 | 18,167 | ||||||
| Long-term lease liability | 2,697 | 2,864 | ||||||
| Other noncurrent liability | 3,556 | 3,568 | ||||||
| Total liabilities | 23,627 | 24,599 | ||||||
| Stockholders’ Equity: | ||||||||
| Common stock - par value $.0001 per share, 50,000,000 shares authorized: Shares issued and outstanding: June 30, 2026 – 10,133,261 and 10,100,311; March 31, 2026 – 10,078,381 and 10,024,469, respectively. | 1 | 1 | ||||||
| Additional paid in capital | 19,574 | 19,482 | ||||||
| Accumulated deficit | (11,963 | ) | (11,810 | ) | ||||
| Total stockholders’ equity | 7,612 | 7,673 | ||||||
| Total liabilities and stockholders’ equity | $ | 31,239 | $ | 32,272 | ||||
TECHPRECISION CORPORATION
CONDENSED CONSOLIDATED STATEMENTS OF OPERATIONS
(unaudited)
| Three months ended June 30, | ||||||||
| (dollars in thousands, except share and per share data) | 2026 | 2025 | ||||||
| Revenue | $ | 9,096 | $ | 7,379 | ||||
| Cost of revenue | 7,696 | 6,349 | ||||||
| Gross profit | 1,400 | 1,030 | ||||||
| Selling, general and administrative | 1,445 | 1,493 | ||||||
| Loss from operations | (45 | ) | (463 | ) | ||||
| Other (expense) income | (2 | ) | 1 | |||||
| Interest expense | (106 | ) | (135 | ) | ||||
| Total other expense, net | (108 | ) | (134 | ) | ||||
| Loss before income taxes | (153 | ) | (597 | ) | ||||
| Income tax expense (benefit) | --- | --- | ||||||
| Net loss | $ | (153 | ) | $ | (597 | ) | ||
| Net loss per share – basic and diluted | $ | (0.02 | ) | $ | (0.06 | ) | ||
| Weighted average number of shares outstanding – basic and diluted | 10,100,311 | 9,757,846 | ||||||
TECHPRECISION CORPORATION
REVENUE, COST OF REVENUE, GROSS PROFIT BY SEGMENT
(Unaudited)
| June 30, 2026 | June 30, 2025 | Changes | ||||||||||||||||||||||
| Percent of | Percent of | |||||||||||||||||||||||
| (dollars in thousands) | Amount | Revenue | Amount | Revenue | Amount | Percent | ||||||||||||||||||
| Revenue | ||||||||||||||||||||||||
| Ranor | $ | 5,461 | 60 | % | $ | 4,297 | 58 | % | $ | 1,164 | 27 | % | ||||||||||||
| Stadco | 4,064 | 45 | % | 3,332 | 45 | % | 732 | 22 | % | |||||||||||||||
| Intersegment elimination | (429 | ) | (5 | )% | (250 | ) | (3 | )% | (179 | ) | (72 | )% | ||||||||||||
| Consolidated Revenue | $ | 9,096 | 100 | % | $ | 7,379 | 100 | % | $ | 1,717 | 23 | % | ||||||||||||
| Cost of revenue | ||||||||||||||||||||||||
| Ranor | $ | 4,315 | 48 | % | $ | 2,804 | 39 | % | $ | 1,511 | 54 | % | ||||||||||||
| Stadco | 3,795 | 42 | % | 3,795 | 52 | % | --- | --- | % | |||||||||||||||
| Intersegment elimination | (414 | ) | (4 | )% | (250 | ) | (5 | )% | (164 | ) | (66 | )% | ||||||||||||
| Consolidated Cost of revenue | $ | 7,696 | 86 | % | $ | 6,349 | 86 | % | $ | 1,347 | 21 | % | ||||||||||||
| Gross profit (loss)1 | ||||||||||||||||||||||||
| Ranor | $ | 1,560 | 17 | % | $ | 1,493 | 20 | % | $ | 67 | 4 | % | ||||||||||||
| Stadco | (160 | ) | (2 | )% | (463 | ) | (6 | )% | 303 | 65 | % | |||||||||||||
| Consolidated Gross profit | $ | 1,400 | 15 | % | $ | 1,030 | 14 | % | $ | 370 | 36 | % | ||||||||||||
1Net of intersegment eliminations
TECHPRECISION CORPORATION
CONDENSED CONSOLIDATED STATEMENTS OF CASH FLOWS
(Unaudited)
| Three Months Ended June 30, | ||||||||
| (in thousands) | 2026 | 2025 | ||||||
| CASH FLOWS FROM OPERATING ACTIVITIES: | ||||||||
| Net loss | $ | (153 | ) | $ | (597 | ) | ||
| Adjustments to reconcile net loss to net cash provided by operating activities: | ||||||||
| Depreciation and amortization | 698 | 701 | ||||||
| Amortization of debt issue costs | 14 | 29 | ||||||
| Stock based compensation expense | 92 | 69 | ||||||
| Change in contract loss provision | 178 | (250 | ) | |||||
| Loss on disposal of fixed assets | 2 | --- | ||||||
| Changes in operating assets and liabilities: | ||||||||
| Accounts receivable | (585 | ) | (602 | ) | ||||
| Contract assets | 408 | 510 | ||||||
| Work-in-process and raw materials | (226 | ) | (337 | ) | ||||
| Other current assets | 649 | 85 | ||||||
| Accounts payable | 1,037 | 178 | ||||||
| Accrued expenses | (222 | ) | 67 | |||||
| Contract liabilities | 18 | 922 | ||||||
| Other noncurrent liabilities | (12 | ) | (129 | ) | ||||
| Net cash provided by operating activities | 1,898 | 646 | ||||||
| CASH FLOWS FROM INVESTING ACTIVITIES: | ||||||||
| Purchases of property, plant, and equipment | (2,436 | ) | (1,250 | ) | ||||
| Reimbursements for purchases of property, plant and equipment | 2,420 | 2,226 | ||||||
| Net cash (used in) provided by investing activities | (16 | ) | 976 | |||||
| CASH FLOWS FROM FINANCING ACTIVITIES: | ||||||||
| Debt issue costs | (13 | ) | (17 | ) | ||||
| Revolver loan borrowings | 6,553 | 2,755 | ||||||
| Revolver loan payments | (8,400 | ) | (4,241 | ) | ||||
| Payments of principal for leases | (1 | ) | (2 | ) | ||||
| Repayments of long-term debt | (173 | ) | (169 | ) | ||||
| Net cash used in financing activities | (2,034 | ) | (1,674 | ) | ||||
| Net decrease in cash | (152 | ) | (52 | ) | ||||
| Cash - beginning of period | 431 | 195 | ||||||
| Cash - end of period | $ | 279 | $ | 143 | ||||
EBITDA Non-GAAP Financial Measure
| Three Months ended June 30, | ||||||||||||
| (dollars in thousands) | 2026 | 2025 | Change | |||||||||
| Net loss | $ | (153 | ) | $ | (597 | ) | $ | 444 | ||||
| Interest expense (1) | 106 | 135 | (29 | ) | ||||||||
| Depreciation and amortization | 698 | 701 | (3 | ) | ||||||||
| EBITDA | $ | 651 | $ | 239 | $ | 412 | ||||||
| (1) | Includes amortization of debt issue costs |