Thank you for joining us. Welcome to the Constellium First Quarter 2024 Results Call. I will now hand the call over to our host, Jason Hershiser, Director of Investor Relations. Please proceed.

Thank you, Candice. I would like to welcome everyone to our first quarter 2024 earnings call. On the call today, we have our Chief Executive Officer, Jean-Marc Germain; and our Chief Financial Officer, Jack Guo. After the presentation, we will have a Q&A session. A copy of the slide presentation for today's call is available on our website at constellium.com. Today's call is being recorded. Before we begin, I'd like to encourage everyone to visit the company's website and take a look at our recent filing. Today's call may include forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995. Such statements include statements regarding the company's anticipated financial and operating performance, future events and expectations, and may involve known and unknown risks and uncertainties. For a summary of specific risk factors that could cause results to differ materially from those expressed in the forward-looking statements, please refer to the factors presented under the heading Risk Factors in our Annual Report on Form 20-F. All information in this presentation is as of the date of the presentation. We undertake no obligation to update or revise any forward-looking statement as a result of new information, future events, or otherwise, except as required by law. In addition, today's presentation includes information regarding certain non-GAAP financial measures. Please see the reconciliations of non-GAAP financial measures attached to today's slide presentation, which supplement our IFRS disclosures. Before turning the call over to Jean-Marc, I wanted to remind everyone that beginning this quarter, we have revised the definition of adjusted EBITDA at the consolidated level, based on discussions with the SEC. The new definition will no longer exclude the non-cash impact of metal price lag. We will continue to provide investors and other stakeholders with the non-cash metal price lag impact as it is necessary to get a true assessment of the economic performance of the business. Our segment adjusted EBITDA will continue to exclude the impact, and we will continue to provide guidance for adjusted EBITDA that excludes the impact. And with that, I would now like to hand the call over to Jean-Marc.

Thank you, Jason. Good morning. Good afternoon, everyone, and thank you for your interest in Constellium. Let's begin on Slide 5, and discuss the highlights from our first quarter results. I would like to start with Safety, our #1 priority. While we delivered strong safety performance in the first quarter, our recordable case rate of 2.2 per million hours worked is higher than our target performance. This is a humbling reminder that while we always strive to deliver best-in-class safety performance, we all need to constantly maintain our focus on safety, to achieve the ambitious target we have set. It is a never-ending task for our company and one we take very seriously. Turning to our financial results. Shipments were 380,000 tonnes, down 2% compared to the first quarter of 2023, mainly due to lower shipments in AS&I, partially offset by higher shipments in P&ARP. The lower shipments in AS&I were largely a result of the German extrusion business we sold last year. Revenue of EUR 1.7 billion decreased 12% compared to last year, primarily due to lower metal prices and lower shipments. Remember, while our revenues are affected by changes in metal prices, we operate a pass-through business model, which minimizes our exposure to metal price risk. Our net income of EUR 17 million in the quarter compares to net income of EUR 22 million in the first quarter last year. Adjusted EBITDA was EUR 137 million in the quarter, though this includes a negative non-cash impact from metal price lag of EUR 13 million. If you exclude this impact of metal price lag, as Jason mentioned earlier, which you must if you want to have the real economic performance of the business, the adjusted EBITDA reflects EUR 150 million in the quarter, compared to EUR 166 million last year. Looking at segment adjusted EBITDA, A&T delivered record first quarter performance and was up EUR 7 million compared to last year. P&ARP decreased EUR 12 million in the quarter and AS&I was down EUR 10 million. As we mentioned on our earnings call back in February, the P&ARP segment was impacted in the quarter as a result of the extreme snow and cold weather event at our Muscle Shoals facility in January. The weather event caused a full week of closure at the facility and then a difficult rent backup once employees were able to return to work. Looking across our end markets, aerospace demand continued to grow in the quarter. Packaging shipments were also up in the quarter, including Canstock. Automotive demand remained healthy in North America, while softer demand continued in Europe. Demand in most industrial and other specialty markets remained weak in both regions during the quarter. Moving now to free cash flow. Our free cash flow in the quarter was negative EUR 8 million. We continue to expect to generate positive free cash flow this year of greater than EUR 130 million. I am pleased to report that we launched our share repurchase program in March and repurchased 330,000 shares for around USD 7 million. Our leverage at the end of the quarter was 2.4x and remains within our target leverage range. Overall, I am quite happy with our first quarter performance. With that, I will now hand the call over to Jack for further details on our financial performance.

Thank you, Jean-Marc. And thank you, everyone, for joining our call today. Please turn now to Slide 7, and let's focus on our P&ARP segment performance. In the first quarter of 2024, P&ARP generated segment adjusted EBITDA of EUR 43 million, which was down 21% compared to the first quarter last year. As Jean-Marc mentioned earlier, P&ARP experienced significant weather-related impacts during the quarter. Despite these impacts, as well as continued operational challenges at Muscle Shoals, P&ARP volume was a tailwind of EUR 4 million, with higher shipments in packaging and automotive rolled products. Packaging shipments increased 2% in the quarter versus last year. Within packaging, Canstock shipments were up in the quarter versus last year, partially offset by lower shipments of specialty packaging in Europe. Automotive shipments increased 1% in the quarter, with healthy demand in North America, mostly offset by softness in Europe. Price and mix was a headwind of EUR 9 million, mainly as a result of weaker mix in the quarter. Costs were a headwind of EUR 7 million as a result of unfavorable metal costs, partially offset by lower operating costs. Now turn to Slide 8, and let's focus on the A&T segment. Adjusted EBITDA of EUR 80 million increased 10% compared to the first quarter last year, and is a new first quarter record for A&T. Volume was a headwind of EUR 4 million, as higher aerospace shipments were offset by lower TID shipments in the quarter. Aerospace shipments were up 6% versus last year as the recovery in aerospace markets continues. Shipments in TID were down 8% versus last year, reflecting a slowdown in most industrial markets. Price and mix was a tailwind of EUR 8 million, mainly as a result of mixing the quarter with more aerospace. Costs were a tailwind of EUR 3 million, primarily as a result of lower operating costs. Now turn to Slide 9, and let's focus on the AS&I segment. Adjusted EBITDA of EUR 33 million decreased 23% compared to the first quarter last year. Volume was a EUR 6 million headwind, as a result of lower shipments in automotive and industry extruded products. Automotive shipments were down 9% in the quarter versus last year as a result of softness in Europe and the timing impact between certain program switches. Industry shipments were down 28% in the quarter versus last year, primarily as a result of the sale of our German extrusion business, while the market conditions across industry extrusions in Europe remained weak. Price and mix was a EUR 10 million headwind, primarily due to a softer pricing environment in industry and weaker mix in the quarter. Costs were a tailwind of EUR 8 million on lower operating costs. FX and other was a headwind of EUR 2 million in the quarter. It is not on the slide here, but I wanted to make some quick comments on holdings and corporate. In the first quarter, our holdings and corporate expense was EUR 6 million. We continue to expect holdings and corporate expense to run at approximately EUR 40 million in 2024, with the increase primarily driven by additional IT spending, with the upgrade of our ERP system. It is also not on the slide here, but I wanted to summarize the current cost environment we're facing. As you know, we operate a pass-through business model, so we're not materially exposed to changes in the market price of aluminum, our largest cost input. Throughout 2022 and most of 2023, we were faced with broad-based and significant inflationary pressures, although the pressure began to ease in some categories in the fourth quarter last year. Labor and other non-metal costs continue to be higher this year. As for energy, our 2020 forecasts are secured at moderately more favorable levels compared to 2023, although energy prices remain well above historical averages. We remain confident in our ability to offset any future inflationary pressures with top-line actions and our relentless focus on cost control, as we've demonstrated in the past. Now let's turn to Slide 10, and discuss our free cash flow. Our free cash flow was negative EUR 8 million in the first quarter, which was in line with our expectations and better than last year. The year-over-year change is a result of less cash used for working capital and lower capital expenditures, partially offset by lower adjusted EBITDA. Looking at 2024, we expect to generate free cash flow in excess of EUR 130 million for the full year, which we expect to be weighted more towards the second half. As we noted last quarter, we expect CapEx to be around EUR 370 million this year, which includes higher spending on return-seeking projects, such as our recycling and casting center in Neuf-Brisach. The facility is expected to start up on time and on budget in the fourth quarter this year. We expect cash interest of approximately EUR 125 million, which includes the impact from higher interest rates. We expect cash taxes of approximately EUR 55 million, and we expect working capital and other to be a modest use of cash for the full year. With the expected free cash flow generation of over EUR 130 million, we intend to use a large proportion of the free cash flow this year for our share repurchase program. As Jean-Marc mentioned previously, we launched the share repurchase program in March and repurchased 330,000 shares for USD 6.9 million. We have approximately USD 293 million remaining on our existing share repurchase program.

Thank you, Jack. Let's turn to Slide 13, and discuss our current end market outlook. The majority of our portfolio today is serving end markets currently benefiting from durable, sustainability-driven secular growth in which aluminum, a light and infinitely recyclable material, plays a critical role. Turning first to packaging. Inventory adjustments in Canstock appear behind us in both North America and Europe. Canstock shipments have increased in the last few quarters, though demand is still relatively low in the current environment. The long-term outlook for this end market continues to be favorable, as evidenced by the growing consumer preference for the sustainable aluminum beverage can, capacity growth plans from can makers in both regions, and the greenfield investments ongoing here in North America. We are expecting growth in Canstock in 2024. Longer term, we continue to expect packaging markets to grow low to mid-single digits in both North America and Europe. I am pleased to report that the recycling and casting center we are building at our Neuf-Brisach facility is well underway and both on time and on budget as Jack mentioned earlier. The project is still expected to start up in the fourth quarter this year and ramp up quickly in 2025. As I mentioned before, Muscle Shoals was impacted in the quarter by the extreme cold weather. In addition, the plant continues to face some ongoing operational challenges. We are encouraged by the improved performance we have seen there recently, and we expect operations to continue to improve as the year progresses. Turning now to Automotive. Automotive OEM sales and production numbers globally have increased in the last few years, but remain below pre-COVID levels. Demand remains healthy in North America today, though the weaker demand in Europe that we experienced in the fourth quarter last year has continued into the first quarter, and will likely persist into the second quarter. In both regions, demand for EVs is continuing to grow, albeit at a slower pace than expected in the past. Consumer demand for luxury cars, light trucks, and SUVs remains steady. Vehicle electrification and sustainability trends will continue to drive the demand for light weighting and use of aluminum products in the long-term. As a result, we remain positive in this market longer term. Let's turn now to Aerospace. The recovery in aerospace continued in the quarter, though demand in this market also remains below pre-COVID levels. Major aero OEMs remain focused on increasing build rates for both narrow and wide body aircraft, despite ongoing supply chain issues and recent safety concerns. Commercial aircraft backlogs are healthy today, and we remain confident that the long-term fundamentals driving aerospace demand remain intact, including growing passenger traffic, and greater demand for new more fuel-efficient aircraft. Demand remains strong in the business and regional jet markets and the defense and space markets. In addition, we continue to experience strong demand for our Airware family of products. We're excited about the future opportunities to continue our growth in aerospace and related markets, which I will touch on more in a minute. As the chart on the left side of the page highlights, these 3 core end markets represent 80% of our last 12 months revenue. Turning lastly to other specialties, we have experienced weakness across most markets for several quarters in a row now. These markets are typically dependent upon the health of the industrial economies in each region. While the U.S. economy remains healthy today, the economy in Europe continues to be weaker. More specifically, our expectations of recovery in European industrial and automotive markets are somewhat tempered versus last quarter, as we are seeing little improvement in economic indicators in this region. In summary, we like the fundamentals in each of the markets we serve, and we strongly believe that the diversification of our end markets is an asset for the company over the longer term. Let's turn now to Slide 14. I want to spend a few minutes on 2 exciting investments we're making in our aerospace assets, in order to further strengthen our market leadership position. As you all know by now, our first strategic focus is to grow our value add. The 2 investments I'm about to discuss do just that, in the most exciting segment for us, aerospace. First, as we announced in March, our aerospace and TID facility in Ravenswood, West Virginia, was recently selected by the U.S. Department of Energy, to receive an investment of up to USD 75 million, to deploy low to zero carbon technology. The total size of the project is expected to be around USD 150 million, inclusive of the U.S. Department of Energy investment, and it is split 50-50 between maintenance CapEx and return seeking CapEx. In terms of project details, we are looking to replace 3 legacy casting centers in Ravenswood with 2 new modern state-of-the-art casting centers, dedicated for aerospace and TID products. This investment will support the installation of low emissions, smart melt furnaces that can operate using a range of fuels, including clean hydrogen, paving the way towards zero carbon casthouse. In addition to reducing carbon emissions, the project is expected to help maximize recycled scrap intake and equipment efficiency, reduce our reliance on external suppliers by increasing our internal slab casting capabilities, improve worker safety with the introduction of a hands-free casting process, and contribute to local communities around Ravenswood. In terms of timing, the project will be staged and we expect the first casting center to ramp up in 2026, with a second casting center ramping up in 2028. We're extremely honored and proud to have been selected for this investment, and we express our gratitude to the Department of Energy for the support of Constellium and the aluminum industry. Moving on to the second investment. I'm excited to announce today that we are adding a third casthouse at our facility in Issoire, France, dedicated to our Airware products. The total size of this investment is close to EUR 40 million of return seeking CapEx plus working capital, to get the casthouse up and running. The project is expected to significantly increase our capacity and production of Airware products, which will be critical to respond to increased demand in the years to come. Developed through over 20 years of research and development, Airware brings together a unique combination of benefits. It provides low density, strength, thermal stability, corrosion resistance, light weighting, and other attributes. Airware is already in use today across several major aircraft platforms and space programs, and we're excited about the future growth potential for this unique solution in these markets. In terms of timing, we expect to complete the casthouse by the end of 2025, and to ramp up the casthouse in 2026 and beyond. As I mentioned, the investment in Ravenswood is split between maintenance and return seeking CapEx, while the project in Issoire is return seeking CapEx. We expect the return seeking spending on aerospace investments to well exceed our target IRR of 15%. Also, we expect both projects to be funded without an increase to our overall CapEx levels. Our A&T segment is delivering record performance today, and these investments will create new growth opportunities in 2026 and beyond. Turning now to Slide 15. We detail our key messages and financial guidance. Our team delivered solid performance in the first quarter of 2024, despite the mixed end market demand environment we faced, and the significant weather-related impacts at our Muscle Shoals facility. A&T delivered record first quarter segment adjusted EBITDA, and importantly, we also launched our share repurchase program in March. As we look ahead, like many others, we are continuing to face uncertainties on the macroeconomic and geopolitical fronts. At Constellium, we like our end market positioning and we are optimistic about our prospects. Based on our current outlook, we are maintaining our guidance for 2024. We are targeting adjusted EBITDA excluding the non-cash impact of metal price lag, in the range of EUR 740 million to EUR 770 million and free cash flow in excess of EUR 130 million. To give some more color on earnings cadence for the year, our guidance assumes sequential improvements in adjusted EBITDA in the second quarter, though we do expect the second quarter of 2024 to be below the record quarter we achieved last year. This is driven primarily by persisting weakness in European automotive, industrial, and specialties end markets, as well as scheduled maintenance outages planned in the second quarter this year. I also want to reiterate our long-term guidance of adjusted EBITDA, excluding the non-cash impact of metal price lag in excess of EUR 800 million in 2025, and our commitment to maintain our target leverage range of 1.5x to 2.5x. To conclude, let me say again that I'm proud of our results and very excited about our future. We are extremely well positioned for long-term success and we remain focused on executing our strategy and creating value for our shareholders. With that, Candice, we will now open the Q&A session.

Our first question comes from Curt Woodworth of UBS.

I just wanted to drill down into some of the moving pieces affecting P&ARP. It seems like there's a variety of issues going on between some operational challenges at Muscle Shoals, as well as you highlighted negative mix in the quarter. But when we look at your unit profitability year-on-year or on a sequential basis, it's pretty significantly depressed relative to, I think, broader expectations for mixed benefits you would see in auto and obviously a lot of the efforts the company has made to reposition some of the contracts in the can sheet. So can you kind of just give us a sense for maybe what the Muscle Shoals kind of headwind was in this quarter? And then, as you think about 2Q and P&ARP, can you talk about what your margin expectations are, and how we should think about it going into the remainder of the year?

So I'll start and then Jean-Marc can help me. So when you look at the P&ARP results in the first quarter, mix was unfavorable, and that's because we've had more packaging volume in relative in the proportion of the mix. So that's one thing to keep in mind, as we kind of look forward. On the cost side, P&ARP actually had a substantial amount of impact on the cost side from the Muscle Shoals' weather event in the first quarter. Obviously, that's an adverse result compared to the first quarter of last year. So now, if we kind of look forward in terms of margin assumption, I mean, this is something we also mentioned in the past that this business unit, with the recovery in packaging and strong automotive, it should see margin returning to over EUR 300 per tonne. We didn't see that in Q1. To get to the over EUR 300 per tonne level, we're looking at improved performance at Muscle Shoals. We're looking at more recycling benefits. And that will be coming; that will be helped out by the FD6, where the Neuf-Brisach investment is there, which is wrapping up starting the fourth quarter this year. And also with the continued focus on pricing and cost discipline. But, if you look at those buckets, and look at what the results in the first quarter, 2024, will continue to be a year in transition from a margin perspective.

Okay. And then, I guess, with respect to some of the new Greenfield mills that are planning to come up until late '25 and '26. And obviously, there's been some delays at one of the mills, I'm just wondering, are you seeing any change in kind of your customers looking to come to you, to secure any more volume as a potential hedge against delays in some of these projects? And then just given there's been a little slower ramp-up in the can sheet market, you talked about industrial. What's your confidence level that this capacity can be absorbed? And do you have a strategy to try to extend contract duration within your mix, to kind of hedge against potential oversupply?

Yes. So Curt, there's plenty in your question here. So on the can sheet side, as we communicated, we are sold out through '27, and nearly '28. So there is not a possibility for us to increase our sales in this period. But we do see customers wanting some more, possibly as a hedge against a ramp-up, because the questioning the ramp-up of these new mills, we're trying hard to meet their needs. But it's extremely difficult because, again, we built a very solid position with long-term contracts, which we like, and that's where we are. So I think the capacity of the market to absorb the volumes, I think on a macro basis, we've always said there needs to be more capacity in North America. So those 2 Greenfields are needed, to meet the needs of the market in can and in auto, and also specialties, which is more cyclical, but also in specialties where we don't participate ourselves. And we're seeing the evidence of it in our discussions with our customers, where we are sold out. And yes, they would like a bit more if we could make it. So I think that's how I would answer your question, Curt.

And then maybe just lastly on the guidance for 2Q to be down, would you expect that to be primarily functional around the P&ARP segment? And then can you give us any kind of magnitude of how much it could be down year-on-year? And I'll turn it over.

So we won't go into the specifics here, Curt, but just when you look across the business unit, I mean, units, keep in mind, the second quarter for A&T last year was a record quarter. So that's a tough comp, #1. And then, when you look at volume expectations, we do expect the trends we've seen in the first quarter, to continue into the second quarter, at P&ARP and AS&I. And also keep in mind, in the second quarter this year, as we mentioned in the script, we do have some planned outages in preparation for a stronger back half of the year, and that will have some impact on volume in the second quarter.

The next question comes from the line of Katja Jancic.

I think you mentioned that you expect to use a large portion of your free cash flow for share buybacks in the second half. Can you talk a bit about what percent of free cash flow you would be comfortable in using for share buybacks?

We won't be too precise here, Katja, but thank you for the question. We are expected to generate over EUR 130 million of free cash flow. So when we say a large percentage, you can imagine it's more than half, but it's not 100%.

And maybe I missed this, but on the new, yes, sorry?

No, Katja. It's Jean-Marc here. I just wanted to add that we want to stay within our target leverage range, even though we may not be specific as to any given quarter, but overall, we want to stay within our target leverage range.

I just want to clarify one more thing. You mentioned the second half, and I don't think we'll be too involved. I believe we will take a more hands-off approach and rely on the 10b5 program for execution throughout the year.

And then on the new Airware casthouse, is there a volume increase that you can talk about? I might have missed that?

Yes, Katja, there is a volume increase. We are not going to talk about it because it's commercially extremely sensitive. It's a light material, so you will not see a big increase on the tonnes, but you will see a significant increase in value add for Constellium over time. And that's what is very exciting for us.

Maybe if I can ask one more...

You can think of these 2 investments we're talking about. As you know, if you think of the CapEx dollars to the EBITDA return we're getting out of them, they are the same kind of ratio as what we're observing, with the upcoming FD6 in Neuf-Brisach. So really attractive investments for us.

And on the A&T segment, the EBITDA per tonne margin is up year-over-year, but it was down sequentially. How should we think about it in the rest of the year?

So Katja, I wouldn't read too much into the quarterly margin, but I think for the business unit, we have momentum in this business unit with aerospace, right? So the margin will stay high, and it'll stay well above EUR 1,000 per tonne guidance that was provided before.

As a long-term.

Your next question comes from the line of Bill Peterson of JPMorgan.

Kind of taking a higher-level view for the full year, you are reiterating your EBITDA guidance. However, given the weaker starting point, you talk about a quarterly improvement, but can you provide a bridge on how we should think about the EBITDA growth for the remainder of the year? Like what visibility do you have to support the reiteration of guidance? What's in your control and what needs to happen in the various end markets to achieve that, especially in the context of the macro headwinds you spoke to in the prepared remarks? I guess, what we're looking for is what's going to be driving the back half step up in profitability?

I'll start, and Jack will help me as well. So I think it's important to note that if you look at can sheet, it's growing again. If you look at automotive in the U.S., it's extremely strong. It's a little bit disappointing in Europe, but it's extremely strong in the U.S. And aerospace is exceptionally strong for us and continues to show strength. So that's 70% of our sales that are actually experiencing tailwinds. And we've got quite a bit of visibility, because of our long-term contracts. So we don't know for sure, what the second half of the year will be, but we've got pretty good visibility. So that's a #1 very important element in the backdrop for our guidance. Second element is the weather event. I hate to come back to it, that we experienced in January in Muscle Shoals was extremely significant. That's a significant drag on EBITDA and on costs and on volumes. And obviously, we're not forecasting that to happen again for the remainder of the year. So you take these 2 elements and you already have a good view into the projection for the rest of the year. So it will mean that the second half will be back and loaded. The second half will be quite strong under the current environment. We are not betting on an improvement in European industrial outlook, but the strengths in the other markets should carry us through the rest of the year. Jack, anything you want to add?

No. I think it was good.

Did I answer your question, Bill?

Yes. No, yes. Coming back to packaging, and I guess, on the multi-year view, I think you've talked about the need for additional North American capacity. You obviously see a lot of imports in the market. But I guess the question is, as we look out over a multi-year period, with this additional capacity coming online in the U.S., what happens to the volumes that are being imported? Do you see any potential for these imports to compete with your European businesses in that side of the pond? Or how should we think about the competitive landscape universally within your packaging group, with this North American additions?

Yes, you're right to highlight that imports in the U.S. are currently at an unusually high level, and there are various trade actions being discussed. These imports are not very competitive when delivered to customers, and they may also face increased duties in the future. Europe could be a potential market for these exports, but it's important to note that can sheet demand is growing globally, not just in the U.S. and Europe. Industrial economies in Asia are recovering, despite some weakness in China, and there is significant growth potential in those regions. Therefore, these exports will likely find alternative markets. When it comes to Europe, it remains a fragmented market that presents challenges for outside companies trying to operate there. European players are becoming more aware of foreign competition and the risks of dumping. As a result, we don't see a significant risk from incoming imports. Overall, it's uncertain how competitive these imports from distant locations can be in Europe due to logistical challenges.

If I can ask one more question, you mentioned the AS&I had some mix issues along with price and mix headwinds. Can you provide more details on that? It seems like you discussed the competition, and I'm curious about what changes are happening in this market. More importantly, when do you think the fundamentals will stabilize in the industrial sector?

Yes. So AS&I is the most exposed of our 3 segments to the European because just of the geography, right, to the European economy, all our industry sales are in Europe, and production is in Europe. And a lot of our auto structures business is in Europe. So the geographic mix is weighing quite heavily on the AS&I performance. So that's really the main driver.

Yes. Bill, I would just like to add that when we analyze the situation for AS&I, the impact from volume and the price index is mainly due to lower automotive activity in Europe. Our performance aligns with the industry's production rates in both the first and second quarters. However, industry forecasts suggest that there will be an improvement in the second half.

And finally, just one note, again. On the volume side, if you look at our shipments in tonnes, most, the vast majority of the decline is due to the sale of the German extrusion business, which we had in the first quarter. I mean, we had it for the first 3 quarters of last year and we sold it. So when you look at the volume level, it looks like a dramatic decline, but it's really because we sold the business.

The next question comes from Timna Tanners of Wolfe Research.

Wanted to ask first off on Muscle Shoals, if you could. If I missed them, I apologize, but did you quantify the impact of the heavy snow in the first quarter? And can you discuss a bit more the lingering challenges that you referred to?

So maybe I'll start, Timna. I think in terms of the impact, we did not quantify it. But one way to think about it is, if we didn't have the unusual event, weather event in the first quarter in January at Muscle Shoals, P&ARP would have achieved a better performance relative to the first quarter of last year.

And the lingering challenges you mentioned?

Yes. So we have expectations for growth. So I'll backtrack a bit. The markets in North America for can sheet and for automotive are growing. So over the course of the next several years and even in past few years, we've been raising our expectations of output from Muscle Shoals, and we are constantly running a little bit behind. We're making progress, but we're constantly running a bit behind our own expectations. That's reflected in our guidance, by the way. And that's really what we're talking about, right? So making some progress, but not at the rate at which we were hoping. And we continue to be very focused on improving both the seniority and the knowledge of our teams. And then, the reliability of our equipment. It's a daily grind in industrial operations that we continue to be very focused on.

And then my other question was just really a higher-level question about the recent announcement by President Biden to vow to add to aluminum tariffs. Obviously, we also know that if Trump is reelected, he would also add to tariffs broadly. So can you remind us how you feel positioned vis-a-vis those potential increase in import tariffs?

It's a broad question, and tariffs can manifest in various forms, impacting differently based on their implementation. Anti-dumping tariffs are beneficial as they target those who don’t follow the rules, creating a level playing field. In contrast, 232 tariffs impose a blanket charge on certain imports, which raises domestic prices. Granting exemptions to various players could lead to competitive advantages for some imports, resulting in a complex situation that makes it difficult to determine how it will affect the industry. Regarding the 301 tariffs you're referencing, they fall under the blanket category as well, and we need to observe their implementation and any exemptions before evaluating their potential positive impacts. While there should be some benefits, I doubt the impact will be significant. Recently, there's been news about tariffs in Mexico, which could be more beneficial for the industry since Mexico has been a route for imports into North America. Closing this gap could have a greater effect than the 301 announcement from President Biden. However, these situations can develop unexpectedly. It won't be negative, but we will have to see how positive it turns out to be.

The next question comes from the line of Josh Sullivan of The Benchmark Company.

With one of your OEM aerospace customers here announcing a change in narrow body production, have you seen any change in demand for aerospace plate leading into that announcement? You mentioned plate inventory is still recovering, still strong. There's a thought that suppliers that are delivering at build rates will be paced and those that are catching up will continue to see some good growth. Can we infer from your comments, you're in that second bucket?

Yes. So we have not seen any impact. I'll remind you that we are much less exposed to this OEM than to the other one or ones. So our exposure is very limited that we are not seeing, nor are we anticipating any decrease in demand for our products, as a result of this reduction in rate.

And then, just kind of relatedly, given the negotiations with Boeing, Airbus, Spirit, on the European operations, would any potential change in ownership from Spirit for those Airbus-related assets fall under the Airbus contract? And could that mean any pickup or changing Constellium content there?

I don't think so, Josh. I don't think this will have any impact, positive or negative, on us.

And then just lastly on that third casting house for Airware, I think you mentioned some more value-added work you're going to be doing there. What does that mean? Is that a new alloy or a vertical move or anything? Can you just expand on that?

So Airware is now a well-established alloy, specialty alloy in aerospace applications, and we are seeing increased demand for this alloy. And the products made out of it, right? And these command a very nice price because it's very high value for our customers, right? The properties that you achieve are extremely interesting in sophisticated applications, especially in space, where weight and the cryogenic resistance are super important. So we are seeing now, after many years of development, commercial development in the market, more and more aircraft and more and more platforms in space adopting Airware. As a consequence, there is a need for more of that product, and that will be very positive for our A&T segment in '26 and for the next 10 years after that, if not more.

Good to hear.

The next question comes from Sean Wondrack of Deutsche Bank.

Congratulations on the ratings upgrade. Long overdue. And I appreciate your guidance. Very thorough here. And when I think about some of your larger cost buckets, like energy costs and labor costs, I guess on the energy side, can you talk about sort of what your assumption is for this year? And just as it relates to labor, do you have any unions resettling our contracts this year? Is there anything there that could potentially push costs up a little bit?

No is the answer regarding the labor side. When we consider cost pressures, specifically in terms of energy, we noted that energy costs peaked in the second half of last year, particularly in the fourth quarter. Our hedge costs are now more favorable compared to 2023, although they remain significantly higher than historical averages. This could provide a cost advantage for us throughout the rest of this year. However, labor costs remain elevated. It's important to remember that labor is our second largest cost category after metal, and inflation in this area is likely to persist in the future, which could continue to pose challenges.

And also you've pursued a balanced strategy of growing EBITDA and reducing debt on an absolute basis. Clearly, you're several innings into this. Should we expect any permanent debt reduction going forward, or do you think it'll mostly be through EBITDA growth, to the extent you're comfortable?

I believe that we will naturally reduce our debt, and a significant portion of our free cash flow will be allocated towards share buybacks. However, we will also retain some funds to maintain our financial flexibility. Most of this reduction will come from natural deleveraging.

And then the last one from me. As you think about your share repurchase program and it's likely you generate more cash in the back half of the year, and you weigh it against sort of M&A opportunities. Is there anything out there, especially in Europe, now that we've had a depressed environment for a period of time that could be attractive to you either in the near to medium term, or do you think you're just going to continue along, with your organic plan of repurchasing shares?

We are fully committed to our share buyback program, and maintaining financial discipline remains a priority. Regarding M&A, if we pursue any opportunities, we will be very selective. Any acquisition must meet our internal return requirements and fit within our targeted leverage. If leverage changes, we will ensure it is corrected back to our target within a year, and the opportunity must provide synergies. Additionally, enhancing our recycling efforts is a key focus for us. We're investing in France and Ravenswood to boost our recycling capacity, both organically and through potentially attractive external acquisitions. However, we will approach such opportunities strategically and selectively, always considering our target leverage range.

As there are no additional questions waiting at this time, I'd like to hand the conference call back over to Jean-Marc Germain, CEO of Constellium, for closing remarks.

Thank you very much. Yes, thank you very much, everybody, for listening in today and for your questions. And we look forward to updating you on our progress in a few months. Have a good day. Bye-bye.

Ladies and gentlemen, this concludes today's call. Thank you for joining. You may now disconnect your lines.