HURC 8-K
Hurco Companies Inc (HURC)
UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, DC 20549
FORM
CURRENT REPORT Pursuant
to Section 13 or 15(d) of the
Securities Exchange Act of 1934
Date of report (Date of earliest event reported):
(Exact Name of Registrant as Specified in Its Charter)
(State or Other Jurisdiction of Incorporation)
(Commission File Number) | (IRS Employer Identification No.) |
(Address of Principal Executive Offices) | (Zip Code) |
(
(Registrant’s Telephone Number, Including Area Code)
Not Applicable
(Former Name or Former Address, if Changed Since Last Report)
Check the appropriate box below if the Form 8-K filing is intended to simultaneously satisfy the filing obligation of the registrant under any of the following provisions (see General Instruction A.2. below):
Securities registered pursuant to Section 12(b) of the Act:
Title of each class | Trading Symbol(s) | Name of each exchange on which registered |
Indicate by check mark whether the registrant is an emerging growth company as defined in Rule 405 of the Securities Act of 1933 (§230.405 of this chapter) or Rule 12b-2 of the Securities Exchange Act of 1934 (§240.12b-2 of this chapter).
Emerging growth company
If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ◻
Item 2.02 Results of Operations and Financial Condition.
On March 7, 2025, Hurco Companies, Inc. (the “Company”) reported its results of operations for the first fiscal quarter ended January 31, 2025. The Company’s earnings release for the period is attached as Exhibit 99.1 and the information set forth therein is incorporated herein by reference and constitutes a part of this report. The attached Exhibit 99.1 is furnished pursuant to Item 2.02 of Form 8-K.
Item 9.01Financial Statements and Exhibits.
Exhibit Index
99.1 | Press Release of Hurco Companies, Inc., dated March 7, 2025 | |
104 | Cover Page Interactive Data File (embedded within the Inline XBRL document) |
SIGNATURES
Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned hereunto duly authorized.
Dated: March 7, 2025 | ||
|
|
|
HURCO COMPANIES, INC. | ||
|
|
|
|
|
|
By: | /s/ Sonja K. McClelland_______________ | |
|
| Sonja K. McClelland, Executive Vice President, Treasurer and Chief Financial Officer |
Exhibit 99.1
FOR IMMEDIATE RELEASE
FRIDAY, MARCH 7, 2025
HURCO REPORTS FIRST QUARTER RESULTS FOR FISCAL YEAR 2025
INDIANAPOLIS, INDIANA – March 7, 2025 -- Hurco Companies, Inc. (Nasdaq: HURC) today reported results for the first fiscal quarter ended January 31, 2025. Hurco recorded a net loss of $4,320,000, or $0.67 loss per diluted share, for the first quarter of fiscal year 2025, which included a non-cash tax valuation allowance of $2,385,000 recorded in provision for income taxes, compared to a net loss of $1,648,000, or $0.25 loss per diluted share, for the corresponding period in fiscal year 2024.
Sales and service fees for the first quarter of fiscal year 2025 were $46,414,000, an increase of $1,355,000, or 3%, compared to the corresponding prior year period, and included an unfavorable currency impact of $434,000, or 1%, when translating foreign sales to U.S. dollars for financial reporting purposes.
Greg Volovic, Chief Executive Officer, stated, “We continue to navigate the global markets and changing demand for machine tools to fulfill the needs of our customers. This quarter saw strong demand for our more competitively priced Hurco (VM) machines, Milltronics toolroom lathes and vertical milling machines, as well as Takumi horizontal machines, with year-over-year, first quarter sales increasing by 3% overall, with notable strength in the Americas, where sales grew by 9%, and in the Asia Pacific region, where sales grew 18%. While overall sales increased, order volume in the U.S. softened as some customers appeared to delay capital investments amid broader economic uncertainty. However, our commitment to financial discipline and optimizing operations and working capital have resulted in a significant addition to our cash position and efficient management of inventory levels. While market cycles present challenges, our diverse product portfolio, global reach, and financial strength ensure that we remain a trusted partner, ready to provide customers with the machines they need—when they need them.”
The following table sets forth net sales and service fees by geographic region for the first fiscal quarter ended January 31, 2025, and 2024 (dollars in thousands):
| Three Months Ended | |||
| January 31 | |||
| 2025 | 2024 | $ Change | % Change |
Americas | $18,108 | $16,650 | $1,458 | 9% |
Europe | 21,614 | 22,750 | (1,136) | (5)% |
Asia Pacific | 6,692 | 5,659 | 1,033 | 18% |
Total | $46,414 | $45,059 | $1,355 | 3% |
Sales in the Americas for the first quarter of fiscal year 2025 increased by 9%, compared to the corresponding period in fiscal year 2024, primarily due to an increased volume of shipments of Hurco and Milltronics machines. The increase in sales was mostly attributable to increased shipments of VM and toolroom machines, as well as lathes.
European sales for the first quarter of fiscal year 2025 decreased by 5%, compared to the corresponding period in fiscal year 2024, and included an unfavorable currency impact of 1%, when translating foreign sales to U.S. dollars for financial reporting purposes. The decrease in European sales for the first quarter of fiscal year 2025 was primarily attributable to a decreased volume of shipments of higher performance Hurco VMX machines and lathes in France and Italy, partially offset by increased shipments of higher-performance 5-axis Hurco machines in the United Kingdom and Milltronics vertical milling machines throughout the European region. In addition to the decreased machine sales for the quarter, European sales also reflected a decline in shipment of accessories manufactured by our wholly owned subsidiary, LCM Precision Technology S.r.l. (“LCM”).
Asian Pacific sales for the first quarter of fiscal year 2025 increased by 18%, compared to the corresponding period in fiscal year 2024, and included an unfavorable currency impact of 2%, when translating foreign sales to U.S. dollars for financial reporting purposes. The increase in Asian Pacific sales primarily resulted from a higher volume of shipments of Hurco and Takumi machines in China and India.
Orders for the first quarter of fiscal year 2025 were $40,085,000, a decrease of $10,133,000, or 20%, compared to the corresponding period in fiscal year 2024, and included an unfavorable currency impact of $374,000, or less than 1%, when translating foreign orders to U.S. dollars.
The following table sets forth new orders booked by geographic region for the first fiscal quarter ended January 31, 2025, and 2024 (dollars in thousands):
| Three Months Ended | |||
| January 31 | |||
| 2025 | 2024 | $ Change | % Change |
Americas | $14,643 | $20,796 | ($6,153) | (30)% |
Europe | 19,370 | 23,535 | (4,165) | (18)% |
Asia Pacific | 6,072 | 5,887 | 185 | 3% |
Total | $40,085 | $50,218 | ($10,133) | (20)% |
Orders in the Americas for the first quarter of fiscal year 2025 decreased by 30%, compared to the corresponding period in fiscal year 2024, primarily due to decreased customer demand for Hurco and Milltronics machines, particularly the higher-performance VMX machines.
European orders for the first quarter of fiscal year 2025 decreased by 18%, compared to the corresponding prior year period, and included an unfavorable currency impact of 1%, when translating foreign orders to U.S. dollars. The decrease in orders was driven primarily by decreased customer demand for electro-mechanical components and accessories manufactured by our wholly-owned subsidiary, LCM, as well as decreased customer demand for Hurco and Takumi machines in France and Italy. The decrease in Hurco machines was primarily due to decreased demand for higher-performance VMX and 5-axis machines.
Asian Pacific orders for the first quarter of fiscal year 2025 increased by 3%, compared to the corresponding prior year period, and included an unfavorable currency impact of 2%, when translating foreign orders to U.S. dollars. The increase in Asian Pacific orders was driven primarily by an increase in customer demand for Hurco machines in China, partially offset by decreased customer demand for Hurco and Takumi machines in India.
Gross profit for the first quarter of fiscal year 2025 was $8,290,000, or 18% of sales, compared to $9,695,000, or 22% of sales, for the corresponding prior year period. The year-over-year decrease in gross profit as a percentage of sales was primarily due to the lower volume of sales of vertical milling machines in the Americas and Europe where we typically sell more of our higher-performance VMX series machines and lathes. Additionally, gross profit was negatively impacted by the allocation of fixed costs on lower margin sales and lower production volumes.
Selling, general, and administrative expenses for the first quarter of fiscal year 2025 were $10,382,000, or 22% of sales, compared to $11,515,000, or 26% of sales, in the corresponding fiscal year 2024 period, and included a favorable currency impact of $84,000, when translating foreign expenses to U.S. dollars for financial reporting purposes. The year-over-year reduction in selling, general and administrative expenses for the quarter reflected lower levels of discretionary spending, reduced sales commissions, and reduced employee health insurance costs.
Income tax expense for the first quarter of fiscal year 2025 was $2,041,000, compared to an income tax benefit of $601,000, for the corresponding prior year period. The year-over-year change was primarily due to a $2,385,000 non-cash valuation allowance recorded on our Italian, U.S. and China deferred tax assets, as well as changes in geographic mix of income and loss that includes jurisdictions with differing tax rates, and discrete items related to unvested stock compensation. Because we have a valuation allowance recorded against our Italian, U.S. and China deferred tax assets, we did not record a tax benefit of $1,153,000 for our U.S., Italy and China pre-tax losses for the three months ended January 31, 2025. The valuation allowance recorded during the first quarter of fiscal 2025 reflected a full valuation allowance of the U.S. and Italian deferred tax assets and was recorded after evaluating changes to tax laws, statutory tax rates, and our cumulative three-year income (loss) levels for the U.S. and Italy for the first quarter of fiscal year 2025.
Cash and cash equivalents totaled $41,820,000 at January 31, 2025, compared to $33,330,000 at October 31, 2024. Working capital was $172,591,000 at January 31, 2025, compared to $180,788,000 at October 31, 2024. The decrease in working capital was primarily driven by decreases in inventories and accounts receivable, net, partially offset by an increase in cash and cash equivalents.
Hurco Companies, Inc. is an international, industrial technology company that sells its three brands of computer numeric control (“CNC”) machine tools to the worldwide metal cutting and metal forming industry. Two of the Company’s brands of machine tools, Hurco and Milltronics, are equipped with interactive controls that include software that is proprietary to each respective brand. The Company designs these controls and develops the software. The third brand of CNC machine tools, Takumi, is equipped with industrial controls that are produced by third parties, which allows the customer to decide the type of control added to the Takumi CNC machine tool. The Company also produces high-value machine tool components and accessories and provides automation solutions that can be integrated with any machine tool. The end markets for the Company's products are independent job shops, short-run manufacturing operations within large corporations, and manufacturers with production-oriented operations. The Company’s customers manufacture precision parts, tools, dies, and/or molds for industries such as aerospace, defense, medical equipment, energy, transportation, and computer equipment. The Company is based in Indianapolis, Indiana, with manufacturing operations in Taiwan, Italy, and the U.S., and sells its products through direct and indirect sales forces throughout the Americas, Europe, and Asia. The Company has sales, application engineering support and service subsidiaries in China, the Czech Republic, England, France, Germany, India, Italy, the Netherlands, Poland, Singapore, the U.S., and Taiwan. Web Site: www.hurco.com
Certain statements in this news release are forward-looking statements that involve known and unknown risks, uncertainties, and other factors that may cause our actual results, performance, or achievements to be materially different from any future results, performance, or achievements expressed or implied by such forward-looking statements. These factors include, among others, the cyclical nature of the machine tool industry; uncertain economic conditions, which may adversely affect overall demand, in the Americas, Europe and Asia Pacific markets; the risks of our international operations; governmental actions, initiatives and regulations, including import and export restrictions, duties and tariffs and changes to tax laws; the effects of changes in currency exchange rates; competition with larger companies that have greater financial resources; our dependence on new product development; the need and/or ability to protect our intellectual property assets; the limited number of our manufacturing and supply chain sources; increases in the prices of raw materials, especially steel and iron products; the effect of the loss of members of senior management and key personnel; our ability to integrate acquisitions; acquisitions that could disrupt our operations and affect operating results; failure to comply with data privacy and security regulations; breaches of our network and system security measures; possible obsolescence of our technology and the need to make technological advances; impairment of our assets; negative or unforeseen tax consequences; uncertainty concerning our ability to use tax loss carryforwards; changes in the SOFR rate; the impact of the COVID-19 pandemic and other public health epidemics and pandemics on the global economy, our business and operations, our employees and the business, operations and economies of our customers and suppliers; and other risks and uncertainties discussed more fully under the caption “Risk Factors” in our filings with the Securities and Exchange Commission. We expressly disclaim any obligation to update or revise any forward-looking statements, whether as a result of new information, future events or otherwise.
Contact:Sonja K. McClelland
Executive Vice President, Treasurer, & Chief Financial Officer
317-293-5309
Hurco Companies, Inc. | |||
CONDENSED CONSOLIDATED STATEMENTS OF OPERATIONS | |||
(In thousands, except per share data) | |||
| | | |
| Three Months Ended | ||
| 2025 | | 2024 |
| (unaudited) | ||
Sales and service fees | $ 46,414 | | $ 45,059 |
Cost of sales and service | 38,124 | | 35,364 |
Gross profit | 8,290 | | 9,695 |
Selling, general and administrative expenses | 10,382 | | 11,515 |
| | | |
Operating (loss) income | (2,092) | | (1,820) |
Interest expense | 58 | | 131 |
Interest income | 94 | | 156 |
Investment income | 161 | | 59 |
Other (expense) income, net | (384) | | (513) |
(Loss) income before taxes | (2,279) | | (2,249) |
(Benefit) provision for income taxes | 2,041 | | (601) |
Net (loss) income | ($ 4,320) | | ($ 1,648) |
| | | |
(Loss) income per common share | | | |
Basic | ($ 0.67) | | ($ 0.25) |
Diluted | ($ 0.67) | | ($ 0.25) |
Weighted average common shares outstanding | | | |
Basic | 6,459 | | 6,483 |
Diluted | 6,459 | | 6,483 |
| | | |
Dividends per share | $ - | | $ 0.16 |
| | | |
| | | |
OTHER CONSOLIDATED FINANCIAL DATA | | | |
| Three Months Ended | ||
Operating Data: | 2025 | | 2024 |
| (unaudited) | ||
Gross margin | 18% | | 22% |
SG&A expense as a percentage of sales | 22% | | 26% |
Operating (loss) income as a percentage of sales | (5)% | | (4)% |
Pre-tax (loss) income as a percentage of sales | (5)% | | (5)% |
Effective tax rate | (90)% | | 27% |
Depreciation and amortization | $ 710 | | $ 908 |
Capital expenditures | $ 556 | | $ 832 |
| | | |
Balance Sheet Data: | 1/31/2025 | | 10/31/2024 |
Working capital | $ 172,591 | | $ 180,788 |
Days sales outstanding | 50 | | 49 |
Inventory turns | 1.0 | | 1.0 |
Capitalization | | | |
Total debt | -- | | -- |
Shareholders' equity | 198,143 | | 207,172 |
Total | $ 198,143 | | $ 207,172 |
Hurco Companies, Inc. | |||
CONDENSED CONSOLIDATED BALANCE SHEETS | |||
(In thousands, except share and per share data) | |||
| January 31, | | October 31, |
| 2025 | | 2024 |
ASSETS | (unaudited) | | |
Current assets: | | | |
Cash and cash equivalents | $ 41,820 | | $ 33,330 |
Accounts receivable, net | 28,355 | | 36,678 |
Inventories | 139,736 | | 153,037 |
Derivative assets | 525 | | 323 |
Prepaid and other assets | 6,119 | | 5,209 |
Total current assets | 216,555 | | 228,577 |
| | | |
Property and equipment: | | | |
Land | 1,046 | | 1,046 |
Building | 7,381 | | 7,381 |
Machinery and equipment | 25,383 | | 28,106 |
Leasehold improvements | 4,248 | | 4,667 |
| 38,058 | | 41,200 |
Less accumulated depreciation and amortization | (29,903) | | (32,404) |
Total property and equipment, net | 8,155 | | 8,796 |
| | | |
Non-current assets: | | | |
Software development costs, less accumulated amortization | 7,235 | | 7,044 |
Intangible assets, net | 722 | | 763 |
Operating lease - right of use assets, net | 11,443 | | 11,313 |
Deferred income taxes | 617 | | 1,349 |
Investments | 8,414 |
| 8,216 |
Other assets | 2,690 |
| 2,585 |
Total non-current assets | 31,121 | | 31,270 |
| | | |
Total assets | $ 255,831 | | $ 268,643 |
| | | |
LIABILITIES AND SHAREHOLDERS' EQUITY | | | |
| | | |
Current liabilities: | | | |
Accounts payable | $ 22,322 | | $ 24,951 |
Customer deposits | 3,228 | | 4,308 |
Derivative liabilities | 1,817 | | 705 |
Operating lease liabilities | 3,881 | | 3,829 |
Accrued payroll and employee benefits | 6,266 | | 7,786 |
Accrued income taxes | 1,451 | | 866 |
Accrued expenses | 4,013 | | 4,258 |
Accrued warranty expenses | 986 | | 1,086 |
Total current liabilities | 43,964 | | 47,789 |
| | | |
Non-current liabilities: | | | |
Deferred income taxes | 49 | | 53 |
Accrued tax liability | 537 | | 537 |
Operating lease liabilities | 7,917 | | 7,852 |
Deferred credits and other | 5,221 | | 5,240 |
Total non-current liabilities | 13,724 | | 13,682 |
| | | |
Commitment and contingencies | - | | - |
| | | |
Shareholders' equity: | | | |
Preferred stock: no par value per share, 1,000,000 shares authorized; no shares issued | - | | - |
Common stock: no par value, $.10 stated value per share, 12,500,000 shares authorized; 6,644,286 and 6,548,838 shares issued and 6,483,990 and 6,435,624 shares outstanding, as of January 31, 2025 and October 31, 2024, respectively | 648 | | 644 |
Additional paid-in capital | 61,728 | | 61,500 |
Retained earnings | 157,102 | | 161,422 |
Accumulated other comprehensive loss | (21,335) | | (16,394) |
Total shareholders' equity | 198,143 | | 207,172 |
| | | |
Total liabilities and shareholders' equity | $ 255,831 | | $ 268,643 |