Kadant Inc Q2 FY2025 Earnings Call

Good day, and thank you for standing by. Welcome to the Second Quarter 2025 Kadant Earnings Conference Call. Please be advised that today's conference is being recorded. I would now like to hand the conference over to your speaker today, Michael McKenney, Executive Vice President and Chief Financial Officer. Please go ahead.

Thank you, Daniel. Good morning, everyone, and welcome to Kadant's Second Quarter 2025 Earnings Call. With me on the call today is Jeff Powell, our President and Chief Executive Officer. Before we begin, let me read our safe harbor statement. Various remarks that we may make today about Kadant's future plans and expectations, financial and operating results and prospects are forward-looking statements for purposes of the safe harbor provisions under the Private Securities Litigation Reform Act of 1995. These forward-looking statements are subject to known and unknown risks and uncertainties that may cause our actual results to differ materially from these forward-looking statements as a result of various important factors, including those outlined at the beginning of our slide presentation and those discussed under the heading Risk Factors in our annual report on Form 10-K for the fiscal year ended December 28, 2024, and subsequent filings with the Securities and Exchange Commission. In addition, any forward-looking statements we make during this webcast represent our views and estimates only as of today. While we may elect to update forward-looking statements at some point in the future, we specifically disclaim any obligation to do so even if our views or estimates change. During this webcast, we refer to some non-GAAP financial measures. These non-GAAP measures are not prepared in accordance with generally accepted accounting principles. A reconciliation of the non-GAAP financial measures to the most directly comparable GAAP measures is contained in our second quarter earnings press release and the slides presented on the webcast and discussed in the conference call, which are available in the Investors section of our website at kadant.com. Finally, I wanted to note that when we refer to GAAP earnings per share, or EPS and adjusted EPS on this call, we are referring to each of these measures as calculated on a diluted basis. With that, I'll turn the call over to Jeff Powell, who will give you an update on Kadant's business and future prospects. Following Jeff's remarks, I'll give an overview of our financial results for the quarter, and we will then have a Q&A session.

Thanks, Mike. Hello, everyone. Thank you for joining us this morning to review our second quarter results and discuss our business outlook for the second half of 2025. I'll begin by reviewing our operational highlights. I'm pleased to report that we had solid demand for aftermarket parts and a healthy increase in capital equipment orders during the second quarter. Overall market demand, particularly in North America, was near a historical high in the second quarter across all our operating segments. Our commercial teams did an excellent job at winning new business in a challenging environment. This performance against the backdrop of continued trade policy uncertainty and global trade tension is noteworthy. And I want to congratulate our management teams around the globe on their strong performance. Our operations continue to focus on meeting our customers' needs and implementing process improvements to increase productivity. As we will discuss this morning, our strong gross margin performance in the quarter is a result of these efforts. Turning next to Slide 6, I'd like to review our Q2 financial performance. Bookings in the second quarter increased 7% to $269 million, led by strong capital performance and stable demand for aftermarket parts. The capital project bookings were particularly encouraging to see as the economic environment remains at a high level of uncertainty. Revenue decreased 7% compared to the record revenue achieved in the second quarter of 2024. This decline was largely the result of softer capital orders in the back half of 2024, which led to fewer capital shipments in the first half of this year. Based on our high level of project activity, we expect sequential improvements in the coming quarters. Adjusted EBITDA was $52 million, down 15% from the then record in the prior year period. Our adjusted EPS was $2.31, down 18% compared to the second quarter of 2024. We have a growing backlog and expect strong bookings in the second half of 2025. Capital project activity remains good but I want to note that the timing of these orders is less certain. This uncertainty is amplified by evolving U.S. trade policies and the ever-changing tariff environment. I'll provide more details on that when I review our operating segments. I'll begin with our Flow Control segment. As you can see on Slide 7, our Flow Control segment had solid bookings in the second quarter of 2025. We benefited from strong aftermarket demand while capital project activity was softer compared to the prior year period. Revenue in the second quarter increased 4% to $96 million even as weaker manufacturing activity in Europe and China dampened our results. Our aftermarket revenue remained strong in the second quarter and made up 75% of total revenue. Solid operating performance led to an adjusted EBITDA margin of 28.9%. As we look ahead to the second half of 2025, we expect demand to improve as the year progresses. That said, the frequently changing global trade discussions and tariff targets may impact capital investment activity. Before leaving this segment, I wanted to share that the integration of Dynamic Sealing Technologies, which was acquired in June of 2024, is now complete, and we are pleased to have this leading producer of fluid rotary unions and related Flow Control products fully integrated into Kadant. The diversity they bring to Kadant in terms of new markets and access to new customer segments greatly expands our opportunities as we pursue growth within our Flow Control operating segment. In our Industrial Processing segment, new order activity was up 9% compared to the same period last year to $105 million. This booking performance was led by a significant increase in capital orders for our wood processing equipment from North American producers of engineered wood products. Revenue decreased 16% compared to the record revenue achieved in the second quarter of 2024. This decline was due entirely to weaker capital shipments as our aftermarket parts business was up 7% compared to the second quarter of last year. Adjusted EBITDA and adjusted EBITDA margin declined due to lower revenue volume and the lack of operating leverage. Looking ahead to the second half of 2025, we expect capital project activity to strengthen in this segment, particularly within our fiber processing product line, where a number of large capital projects are in the pipeline. Turning now to our Material Handling segment. We had excellent bookings performance in the second quarter of $71 million. The 16% increase over the prior year period was led by our bulk material handling product line, and we had solid growth from our baler product line. As was the case with our other 2 operating segments, weaker capital shipments were primarily contributed to a 6% decline in revenue in the second quarter. Business activity remained high with a number of larger capital projects under discussion, although the timing can be uncertain as to when these projects are executed. As I conclude my prepared remarks, I want to emphasize how pleased I am with our operations teams as they continue to execute the strategic initiatives to create and capture more value. Looking ahead to the second half of 2025, we believe industrial demand will strengthen relative to the first half of the year, especially once the global trade issues get worked out. Our backlog is improving, and we are well positioned to capitalize on new opportunities that may emerge as the year unfolds due to our ability to generate strong cash flows. And with that said, I'm pleased to announce that shortly after the close of the quarter, we acquired Babbini, a small company in Italy that manufactures dewatering equipment for the food and paper industry. We were a licensee for the technology for our Upcycling business, and we are excited to have them join the Kadant family. I'll now turn the call back over to Mike for a review of our financial performance in Q2 and our guidance outlook for the remainder of the year.

Thank you, Jeff. I'll start with some key financial metrics from our second quarter. Our second quarter revenue was $255.3 million, which included record aftermarket parts revenue of $181.8 million. Gross margin was 45.9% in the second quarter of '25, up 150 basis points compared to 44.4% in the second quarter of '24. Despite the impact from incremental tariffs, our gross margin was close to 46% for the second quarter in a row. This increase is primarily associated with a higher overall percentage of aftermarket parts, which represented 71% in the second quarter of '25 compared to 63% in the prior year. SG&A expenses as a percentage of revenue increased to 29% in the second quarter of '25 compared to 25.5% in the prior year period. SG&A expenses increased $3.9 million, or 6%, to $73.9 million in the second quarter of '25 compared to $70 million in the second quarter of '24. The weakening of the U.S. dollar resulted in a $1.9 million increase in SG&A expenses, including a $1.2 million impact resulting from the change from foreign currency gains in the prior period to losses in the current period, and a $0.7 million unfavorable effect of foreign currency translation. In addition, we had incremental SG&A expense of $1.8 million related to our acquisitions. Our GAAP EPS decreased 17% to $2.22 in the second quarter, and our adjusted EPS decreased 18% to $2.31. The second quarter of '25 adjusted EPS exceeded the high end of our guidance range by $0.31 due to higher revenue and better gross margin than forecast. The higher revenue in the second quarter was driven by our record aftermarket parts revenue. All of our segments had higher-than-expected gross margin due to the mix of aftermarket parts in the period. In addition to the revenue beat and gross margin performance, we had strong cash flow performance in the quarter, which I'll discuss further in detail on the next slide. Adjusted EBITDA decreased 15% to $52.4 million compared to $61.8 million in the second quarter of '24 due to lower capital revenue at our Industrial Processing segment, which led to reduced EBITDA performance. As a percentage of revenue, adjusted EBITDA was 20.5% compared to 22.5% in the second quarter of '24. As outlined in the chart, our cash flow increased significantly compared to both the first quarter of '25 and the prior year period. Operating cash flow increased 44% to $40.5 million in the second quarter of '25 compared to $28.1 million in the second quarter of '24. Free cash flow increased 58% to $36.5 million in the second quarter of '25 compared to $23.1 million in the second quarter of '24. This strong performance was driven in part by an increase in customer deposits associated with capital bookings in the quarter. Non-operating uses of cash in the second quarter included $34 million of repayments on our debt, $4 million for capital expenditures and $4 million for dividends on our common stock. Let me turn next to our EPS results for the quarter. Our adjusted EPS decreased $0.50 from $2.81 in the second quarter of '24 to $2.31 in the second quarter of '25. This included decreases of $0.56 due to lower revenue, $0.26 from higher operating expenses, $0.02 due to higher non-controlling interest expense, and $0.01 due to higher weighted average shares outstanding. These decreases were partially offset by increases of $0.21 due to a higher gross margin percentage, $0.12 due to lower net interest expense, and $0.02 from a lower effective tax rate. There was no foreign currency translation effect on net income in the second quarter as the weakening of the U.S. dollar caused foreign currency exchange rates to more closely align with the prior period exchange rates. Looking at our liquidity metrics on Slide 15. Our cash conversion days, which we calculate by taking days in receivables plus days in inventory subtracting days in accounts payable, decreased to 128 at the end of the second quarter of '25 compared to 130 at the end of the first quarter of '25. Working capital as a percentage of revenue was 17.7% in the second quarter of '25 compared to 18% in the second quarter of '24. We continue to remain focused on paying down debt as efficiently as possible. Our net debt, that is debt less cash, was $151.7 million in the second quarter, decreasing $31 million sequentially and over $100 million compared to the second quarter of '24. Our leverage ratio, calculated in accordance with our credit agreement, decreased to 0.86 at the end of the second quarter of '25 compared to 0.95 at the end of the second quarter of '25. At the end of the second quarter, '25, we had $162 million of borrowing capacity available under our revolving credit facility and an additional $200 million of uncommitted borrowing capacity. Now I'll review our guidance for '25. For the second quarter in a row, our book-to-bill ratio was over 1, and the strong bookings in the second quarter led to an ending backlog of $299 million, up 16% over the end of '24. The majority of the large capital bookings related to projects, which we recognize as revenue for 2026. While there has been some clarity on country-specific tariffs, customers with large capital projects remain cautious as they evaluate how the tariffs will be applied and whether certain tariff costs can be mitigated. The estimated impact from incremental tariffs remains largely unchanged from our prior forecast. The most significant tariff impact to Kadant relates to tariffs on the imports of steel, which encouraged domestic suppliers to increase their prices and on products sourced from our facilities in China. The Trump administration eliminated prior exemptions and applied a uniform 25% tariff on all U.S. steel imports in February and increased this tariff to 50% on June 4. We believe we'll be able to mitigate a large portion of the impact of the steel price increase by working with our suppliers and coordinating with our customers. There was a reduction to the recently announced China tariffs from 145% to 30% effective in the middle of May. We will continue to pursue opportunities to reduce the impact of these costs by finding alternative suppliers through cost-sharing and in some cases, making investments to change our manufacturing capabilities and manufacturing components at different Kadant facilities. While there has been some clarification on certain tariffs, newly announced tariffs continue to create unease and resulting uncertainty in the market, which has impacted our customers' decision-making process for our capital commitments. We have a very healthy level of quote activity for our capital equipment and we have seen little disruption to capital order activity related to maintenance and mission-critical equipment. However, if customers have flexibility with the timing for their equipment purchases, some are delaying placing the order until there is more certainty and stability in the markets they serve. This environment has made it extremely difficult for our operations to forecast the timing of capital orders, requiring significant judgment on order timing, revenue recognition, and future material costs. We will continue to monitor these tariff changes and we'll provide further updates as the year progresses and there is more clarity with new trade policies. We are maintaining our full year '25 guidance. We continue to expect revenue of $1.20 billion to $1.40 billion in '25 and adjusted EPS of $9.05 to $9.25, which excludes $0.16 of acquisition-related costs. Looking at our quarterly revenue and EPS performance in '25, we expect that the second half of the year will be stronger than the first half. Our revenue guidance for the third quarter of '25 is $256 million to $263 million and our adjusted EPS guidance for the third quarter is $2.13 to $2.23, which excludes $0.01 of acquisition-related costs. We now anticipate gross margins for '25 will be 44.8% to 45.3%. As a percentage of revenue, we now anticipate SG&A will be approximately 27.8% to 28.3%. For '25, we now anticipate slightly lower net interest expense of approximately $11.5 million to $12 million, and we continue to expect our recurring tax rate will be approximately 26% to 27%. That concludes my review of the financials. And I will now turn the call back over to the operator for our Q&A session.

Just touching on the demand environment. Forgive me but I believe you said you guys are expecting sequential order improvement from here?

Yes.

So give me a little parse out...

We are really discussing the comparison between the first half and the second half of the year, but we are anticipating strong performance in both the third and fourth quarters.

Okay. So we think we have closer to $90 million of equipment orders in the second quarter. Is that kind of the new run rate? I mean we did have a benefit from the OSB of $18 million that was announced in May. And it feels like run rate was roughly flat just from a demand perspective. So when you talk to your customers, you get a sense that maybe the tariff uncertainties embedding and just the natural maintenance needs are finally catching up.

I would say that as we talked earlier, industrial processing was the segment where we expected the strongest bookings growth. We've seen some of that in wood processing. In the second half, while we don't expect it to match the second quarter level, we still anticipate solid activity on the capital side. However, we expect the fiber processing product line to see particularly strong activity. There are several large projects around the world that we are monitoring, and we hope our customers will place those orders in the third and fourth quarters.

Okay. And then just on parts and consumables, the recent strength there. Do you believe that's been restocking? Is that still just the elevated age of the installed base? Or is this kind of $180 million revenue sustainable on a quarterly basis going forward?

Yes. We believe the situation is primarily due to the age of the installed base. We expect a modest decline during the summer months in the third quarter, but it will be very slight, continuing the trend we have observed.

Okay. So capital equipment orders start to pick up and you guys deliver, what's the sensitivity we should expect the parts and consumables down mid-single digits as the installed base catches up?

I mean as you're talking about when the equipment gets installed and what kind of impact that will have, now you're out till '26.

Also, I would say that typically happens as the overall operating rates start to increase as the economy improves. So we wouldn't expect to see any noticeable drop-off in the aftermarket because the overall operating rates will increase. As they get more confident, start to make the investments in the new equipment and bring that online, it's normally because the economic conditions have improved, and so we would expect operating rates to be up.

Our next question comes from Gary Prestopino with Barrington.

I want to get some numbers here. Mike, do you have about the current assets and current liabilities were at quarter end?

Sure.

He's pulling out his trusted notebook here, so just give him a second.

As an absolute, current assets were approximately $475 million, and current liabilities were approximately $200 million.

Okay. Could I get some more numbers regarding the parts and consumables? In Flow Control, it was 75% this quarter compared to what it was last year at this time?

75% this quarter, 72% last year. I'll just go through them, Gary. So Flow Control, 75% this quarter, 72% last year, Industrial Processing, 76% this quarter, 59% last year, and in Material Handling, 58% this quarter, 57% last year. So then overall, as we mentioned, 71% this year, this quarter and 63% in the comparing quarter.

Should we consider the increase in capital equipment orders and when we might start seeing those impacts in 2026, or is that expected to begin in the latter half of the year?

We expect capital revenue to increase in the second half of the year. Specifically, in the Industrial Processing segment, particularly fiber processing, we have significant projects underway in North America, Europe, and Asia. For those capital projects in fiber processing, revenue is generally recognized over time. Once we receive the orders, we will begin to recognize that revenue. Therefore, we need to see those orders in the latter half of the year. In contrast, for wood processing, the orders we received in the second quarter will reflect as revenue in 2026, as that revenue is recognized at a specific point in time rather than progressively like in fiber processing.

I was just thinking out loud, would you expect to see the percentage of aftermarket parts as a percentage of revenue decrease sequentially since you're incorporating more capital equipment?

Yes, it will moderate, and there should also be an impact on the gross margins. We won't be maintaining a 46% gross margin; I would expect those to decrease to around 44% if the mix comes in as anticipated.

Could you discuss the bookings you're experiencing? Specifically, what percentage of these bookings is for replacement capital and what percentage is for new business?

I would say it's generally more focused on replacement rather than new greenfields, especially considering the slowdown in Asia, which has been a major area for new greenfield projects over the years. Nevertheless, we are still seeing greenfield projects in Eastern Europe, the Middle East, and parts of Asia outside of China. Additionally, there are conversions happening where customers are modernizing plants and implementing our technology, replacing that of competitors. We experienced a slight benefit from this in the last quarter. One area that has consistently outperformed over the last 10 to 12 years is the engineered wood sector. This segment continues to thrive as new opportunities for engineered products emerge, making it the fastest-growing part of the wood industry. We have had significant success in this area, and the large orders we received this quarter were all related to engineered wood, indicating it has substantial growth potential now and in the future.

Okay. And just one last question in terms of all this new capital equipment, be it replacement or a new customer. Is there anything inherent with the newer equipment that would cause any kind of a lessening of the need for the aftermarket business from running this equipment in terms of the parts? Or is it still...

It depends a little bit on the equipment. If you think on the Engineered Wood side, as they put this new equipment in, almost everybody is using our new knife design, our new knife technology, which really increases the aftermarket component of that. On some of the others, we're constantly trying to innovate our products to give the customer a better performance, in some cases, longer life. Now there's a kind of total cost of ownership calculation that goes in that. But generally speaking, we would not expect to see any significant drop-off in the parts consumables relative to the new technology. While we're continually trying to improve the performance of it, these are very harsh rugged environments that our equipment operates in. And so you're not going to see a significant change in the life of that equipment even though we constantly try to do the best.

Our next question comes from Adi Madan with D.A. Davidson.

Adi on for Kurt Yinger today. And just a couple of questions from me. Going off the wood processing question. So obviously, very encouraging news on that front. But outside of good processing, how would you characterize the underlying demand for capital equipment bookings? And how are the conversations with customers going? Are you seeing customers more confident in placing orders?

As we enter this year, particularly toward the end of last year and into the beginning of this year, we had numerous discussions and numerous projects underway. However, many of those projects were delayed or paused due to the uncertainty created by tariffs. This situation caused many companies to hold back and wait for clarity. In any such scenario, there are usually winners and losers; some of our U.S. customers won't face the same pricing pressures from foreign competition and may benefit from the tariffs, while others might be adversely affected. We've observed what can be described as a capital equipment recession over the past two years, but we are starting to see signs of recovery. Equipment is aging, and historical trends indicate that delays in upgrading can only go on for so long before reliability becomes an issue. There is considerable project activity out there; however, many are pausing until the uncertainties resolve and they can gain more visibility on the situation. The demand across many of our markets looks promising and is expected to strengthen significantly in 2026 and 2027. Ultimately, everyone is eager to move past the trade negotiations and adapt to the new realities, so they can proceed with their plans.

Okay. Got it. Yes, that makes sense. So going off that, so are you seeing big pockets of strength or weakening demand across the portfolio, whether by geographic or by any customer sets that you can give us any color on?

Well, I would say, as I mentioned a few minutes ago, we continue to see strength in certain parts of our Wood Group, in particular, the Engineered Wood Group continues to perform well. And if you talk to industry executives out there, they are quite optimistic about the next many years, what the Engineered Wood business is going to look like. They just continue to find more and more applications for it. The probably our slowest market is China. The other parts of Asia are doing a little better, but China is quite slow right now, and there's a fair amount of, I would say, economic challenges that they're dealing with right now there. North America is the strongest. And then, of course, Europe is kind of sitting in between. It will be interesting to see what happens in Europe because they've agreed to increase their deficit spending. They've agreed to increase their military spending by quite a bit, and that should spur a lot of the industrial base over there but we're in the very early stages of that. So it's too early to know what kind of impact that will have on the market.

Got it. That makes sense. And in the context of the Babbini and GPS acquisition, can you give us an update on the current full year guide assumptions versus the prior as it relates to tariff impact, FX, organic growth and acquisition contributions to sales?

Just to clarify, are you referring specifically to Babbini, Adi?

Babbini and GPS, yes.

Yes. In Babbini's revenue for 2024 was about $19 million, which is relatively small and represents a smaller transaction. We actually completed it early in the third quarter, so I did not include it in the guidance. It will have a minor effect on the top line, and I expect that initially it will be dilutive. We will likely see a few cents of dilution in the third quarter and possibly in the fourth as well.

This acquisition was very strategic for us as we have integrated our technology into our Upcycling business, which processes waste and rejects from industrial processes, particularly in the paper industry. They possess one of the best technologies for dewatering, and we have achieved significant success with it since we licensed it a few years ago. When the owner passed away, and his children chose to divest all their businesses, including Babbini, it made perfect sense for us to acquire it, as it is a crucial technology. While they primarily focused on the food sector, we believe there are additional opportunities in other dewatering areas. Although it's a small acquisition, we see it as a valuable strategic addition.

Got it. That makes sense. And last question from me. How would you characterize your margin profile in the backlog and current bookings relative to the gross margin we've seen over the last few quarters?

Yes. Adi, I think what's most important there is in the first 2 quarters, we had very strong parts and consumable mix, which helped drive the gross margin to the 46%. In the back half of the year, we're expecting the mix to moderate. And I would say the parts and consumables probably be, say, mid-60s, 66, 67. So we'll have more capital in the back half of the year, and that will weigh on the gross margins. And as I was mentioning, to Gary, I'd say I'm looking at kind of in the 44s in the back half of the year on margins with the capital mix we're anticipating.

Our next question comes from Ross Sparenblek with William Blair.

Just a couple of follow-ups if we have a second here. You kind of ran through some of the parts on tariffs. Can you just help us think about that in the framework of your prior guidance of around $0.35 as of the first quarter?

Yes, Ross, I was actually quite surprised at how accurately the team predicted our results when we provided that guidance. The guidance remains consistent, targeting around $5 million to $6 million, or $0.32 to $0.39. They did an excellent job estimating where we would end up.

Okay. And that's just aluminum offsetting lower China rates, presumably lower China rates?

Yes, the rates have decreased a bit in China, but there are discussions about a 15% increase for all of Europe. The steel tariffs have doubled. We have experienced both gains and losses, but when everything is considered, the overall impact hasn't changed significantly.

Okay. And then just SG&A, I mean, it looks like it's taken a little ahead of the informal guidance for 2025. I know we have M&A coming in there, too. So can you maybe just give us a sense of where that should shake out? Is that closer to 28% of sales now?

I believe in the guidance range I provided, I mentioned that we'll fall between 27.8% and 28.3%. So, yes, 28% is likely a good benchmark, Ross.

Perfect. And then just any sense on the P&C mix of the acquisitions?

Sorry, what was that?

The parts and consumables mix, I mean, last year, you guys had some pretty phenomenal deals that were highly accretive. It seems like that's been the focus, just wondering.

This focus will primarily be on the capital aspect. Now that we have the resources, we will diligently work to develop the parts and consumables business.

Our next question comes from Walter Liptak with Seaport Research.

I wanted to ask about your positive report for this quarter, which surpassed your guidance. I have an idea of why that occurred, but could you discuss what contributed to your performance being above expectations this quarter?

The primary driver was the continued strength in the parts and consumables business, which actually exceeded our forecast. The increase in revenue was fueled by parts and consumables, leading to a favorable mix that enhanced our gross margin performance. Ultimately, that was the key factor behind the EPS beat.

Okay. Was it related to the market, or was it your team working to acquire more parts and increase sales market share? What do you attribute this to?

Yes. As you know, that's a key focus for us. Every day, our team is dedicated to pursuing the aftermarket. We're continuously working to enhance that. Additionally, as we mentioned last quarter, the aftermarket is performing better than expected compared to the operating rates. We attribute this to a lack of investment in equipment over the past two-plus years. It's similar to driving an old car; once you go two years beyond its useful life, you need to invest more in parts to keep it operational. It's a combination of our team's hard work in capturing every opportunity and the fact that there are more opportunities because the existing equipment is aging. We believe this will lead to a significant capital buying cycle. We had a positive start this quarter, but we anticipate a prolonged capital buying cycle, whether it continues this year or extends into next year. Investments will need to be made since they haven't been made in several years.

Okay. Got it. Okay. That makes sense. When you're thinking about the third quarter and that parts mix coming down from where it was this quarter, I think that makes sense just because of the maybe more capital projects shipping. But did you factor in, in the third quarter like a deceleration in part sales?

It is quite modest, and it is primarily due to the summer.

Summer. People take vacations. They don't buy it.

It's very modest.

Our next question comes from Adi Madan with D.A. Davidson.

Just wanted to follow up on the contribution you're expecting from GPS acquisition as well for 2025 like you broke out for Babbini. Any color on that?

Yes. So really, when we say Babbini, we're kind of talking about both of those. GPS is a small manufacturer of gearboxes that they primarily supply to Babbini; they do sell to the outside world, but their principal customer is supplying to Babbini. So when we talk about the combination we just call it Babbini.

Thank you. I'm showing no further questions at this time. I would now like to turn it back over to Jeff Powell for closing remarks.

Thank you, Daniel. So before wrapping up the call today, I just want to leave you, as I always do, with a few takeaways. Despite the weaker economies in certain areas of the world and the global trade uncertainties, second quarter was strong in terms of capital order activity and relatively stable with respect to our aftermarket demand. Solid execution by our operations teams led to excellent gross margin performance, and our commercial teams were very successful in winning key projects during the quarter. We have strong market positions and expect strengthening demand as the second half of the year and project activity gains momentum. And with that, we want to thank you for joining us today, and we look forward to updating you next quarter.

This concludes today's conference call. Thank you for participating. You may now disconnect.