Resolution Minerals Ltd 6-K, filed Oct 27, 2026

Resolution Minerals Ltd (RML)

6-K 2026-10-27 For: 2026-10-27

Added on October 27, 2026

About this 6-K

Resolution Minerals Ltd filed this 6-K on October 27, 2026.

Resolution Minerals Ltd said three drill holes at Golden Gate North confirmed a gold zone at least 500 metres (1,600ft) long, 200 metres (650ft) wide and 300 metres (990ft) deep, with assays from HH-GG26-031C, HH-GG26-032C and HH-GG26-039C. AI summary

Search and read filings like this one from Claude or ChatGPT with the SEC filings MCP server →

	Resolution Minerals Ltd

	/s/ Jaroslaw Kopias
	Jaroslaw Kopias
	Chief Financial Officer and Company Secretary

Criteria	JORC Code explanation	Commentary
*Drilling techniques*	●     Drill type (eg core, reverse circulation, open-hole hammer, rotary air blast, auger, Bangka, sonic, etc) and details (eg core diameter, triple or standard tube, depth of diamond tails, face-sampling bit or other type, whether core is oriented and if so, by what method, etc).	●    The Drilled Holes are diamond core drill holes that were drilled by Evolve Exploration Ltd using two Multipower MP1500 modular core rigs providing HQ diamond drill core. ●    The drill core is oriented. The core orientation method is conducted using the ACTxCore Orientation System.
*Drill sample recovery*	●    Method of recording and assessing core and chip sample recoveries and results assessed. ●    Measures taken to maximise sample recovery and ensure representative nature of the samples. ●     Whether a relationship exists between sample recovery and grade and whether sample bias may have occurred due to preferential loss/gain of fine/coarse material.	●   Drill core recovery of the drilled holes have been consistently high (a function of the solid lithologies) approaching 100%. Lower core recovery rates are sometimes observed in fault zones, with the most significant losses usually occurring near the top of the drill hole, close to the collar, with core recoveries of approximately 50% recovery. This lower core recovery represents <1% of the total length of the drill hole.
*Logging*	●    Whether core and chip samples have been geologically and geotechnically logged to a level of detail to support appropriate Mineral Resource estimation, mining studies and metallurgical studies. ●    Whether logging is qualitative or quantitative in nature. Core (or costean, channel, etc) photography. ●     The total length and percentage of the relevant intersections logged.	●    Drill core was logged for lithology, alteration, mineralisation, structure (geotechnical) using oriented core to a level which has enabled preliminary interpretations relating to style of mineralisation, host and thickness. At this stage no Mineral Resource Estimates, mining studies or metallurgical studies are appropriate. ●    Drill core is also logged for RQD and Core recovery. ●    Drill core is then digitally photographed wet while whole after logging. ●    The logging, as described above is both quality and quantitative. ●    100% of the relevant intersections were logged as per above.

Criteria	JORC Code explanation	Commentary
*Data spacing and distribution*	●     Data spacing for reporting of Exploration Results. ●    Whether the data spacing and distribution is sufficient to establish the degree of geological and grade continuity appropriate for the Mineral Resource and Ore Reserve estimation procedure(s) and classifications applied. ●    Whether sample compositing has been applied.	●    The assay data spacing of HH-GG26-031C HH-GG26-032C and HH-GG26-039C, the length and frequency of each sample and the collective coverage of the drill holes are best practise in terms of hole sample representativeness. ●     In terms of geological data spacing associated with the Drilled Holes every metre of these holes was logged, with details of lithology, alteration, mineralisation recorded to sub-metre detail.
*Orientation of data in relation to geological structure*	●    Whether the orientation of sampling achieves unbiased sampling of possible structures and the extent to which this is known, considering the deposit type. ●     If the relationship between the drilling orientation and the orientation of key mineralised structures is considered to have introduced a sampling bias, this should be assessed and reported if material.	●    The Drilled Holes have a drill direction that is approaching perpendicular to the regional trend (lithologically and structurally) and also approaching perpendicular to the known mineralisation. The purpose of the Drilled Holes was to test the possible extension of known gold and tungsten mineralisation at surface at depth along strike from past drill holes and past surface sample results and to test the occurrence of gold in un-oxidised rocks at depth. ●   Cautionary Note: There is currently insufficient data pertaining to sampling orientation and the local-scale orientation of mineralisation to determine the true width of the gold intervals in these holes. Additional holes in all directions are required to determine whether the gold mineralisation is broadly pervasive or (to various degrees) spatially constrained. For example, if the gold mineralisation is broadly pervasive, then the gold intervals in this announcement are true widths. If the gold mineralisation is spatially constrained, then the gold intervals in this announcement are not true widths. Based in increasing data, the gold mineralisation is interpreted as being broadly pervasive in association with a structurally-controlled repeating host sequence of country-rock granites and fault breccias
*Sample security*	●    The measures taken to ensure sample security.	●    All drill core samples were delivered directly to RML’s geologists on site where they remain under direct supervision at a secure site.
*Audits or reviews*	●    The results of any audits or reviews of sampling techniques and data.	●    The competent person is unaware of the undertaking of audits or reviews for sampling technique and data, other than its own review.

Criteria	JORC Code explanation	Commentary
*Mineral tenement and land tenure status*	● Type, reference name/number, location and ownership including agreements or material issues with third parties such as joint ventures, partnerships, overriding royalties, native title interests, past sites, wilderness or national park and environmental settings. ● The security of the tenure held at the time of reporting along with any known impediments to obtaining a licence to operate in the area.	● This announcement refers to exploration results regarding drill core at Golden Gate, a project within the one larger project, Horse Heaven project in Idaho USA, comprising seven hundred and twenty-nine (729) U.S. Federal lode mining claims covering 14,580 acres and includes seven hundred and nineteen (719) mining claims and ten lode mining claims referred as the Oberbillig Group. ● The competent person understands that the mining claims are all in good standing.
*Exploration done by other parties*	● Acknowledgment and appraisal of exploration by other parties.	● No exploration results reported in this announcement were performed by other parties.
*Geology*	● Deposit type, geological setting and style of mineralisation.	● The project area is dominated by Cretaceous-aged granitic rocks relating to intrusive phases associated with the Atlanta Lobe of the Idaho Batholith. These largely granodiorite rocks have intruded Neoproterozoic-aged metasediments, comprising quartzites (which are dominant) calc-silicates, marble and black shale. The area and broader region is affected by broad regional folding and N-S, NNE-SSW, and NE-SW faults. ● Gold, antimony, tungsten and silver mineralisation is associated with hydrothermally altered and fractured granodiorites.
*Drillhole Information*	● A summary of all information material to the understanding of the exploration results including a tabulation of the following information for all Material drillholes: o easting and northing of the drillhole collar o elevation or RL (Reduced Level – elevation above sea level in metres) of the drillhole collar o dip and azimuth of the hole o down hole length and interception depth o hole length. ● If the exclusion of this information is justified on the basis that the information is not Material and this exclusion does not detract from the understanding of the report, the Competent Person should clearly explain why this is the case.	● The drillhole information for the Drilled Holes is included in a table (Table1) with drill collar location data, altitude, dip, azimuth, and end of hole.

Criteria	JORC Code explanation	Commentary
*Diagrams*	● Appropriate maps and sections (with scales) and tabulations of intercepts should be included for any significant discovery being reported These should include, but not be limited to a plan view of drillhole collar locations and appropriate sectional views.	● A drill hole location plan and cross section are provided with geolocation information (coordinates, northing and scale bar) showing the locations of the Drilled Holes. Legends are included within each figure (where appropriate) and when additional explanation is required, this is given to the figure caption. ● A drill hole location plan and cross section are provided in this announcement to provide a sense of location of the hole in relation: to i) other drill holes; and ii) intersected mineralisation. The cross sections include a geological interpretation
*Balanced reporting*	● Where comprehensive reporting of all Exploration Results is not practicable, representative reporting of both low and high grades and/or widths should be practiced to avoid misleading reporting of Exploration Results.	● This announcement is considered to be fair and balanced with respect to the exploration results, being a drilling update.
*Other substantive exploration data*	● Other exploration data, if meaningful and material, should be reported including (but not limited to): geological observations; geophysical survey results; geochemical survey results; bulk samples – size and method of treatment; metallurgical test results; bulk density, groundwater, geotechnical and rock characteristics; potential deleterious or contaminating substances.	● There is no other material data associated with the Drilled Holes not mentioned in this announcement.
*Further work*	● The nature and scale of planned further work (eg tests for lateral extensions or depth extensions or large-scale step-out drilling). ● Diagrams clearly highlighting the areas of possible extensions, including the main geological interpretations and future drilling areas, provided this information is not commercially sensitive.	● The Drilled Holes, subject of this announcement, are part of a large diamond core drill program of 42 holes for 12,236m (40,144 ft), which is now completed. ● Drill hole results will be released on an ongoing basis.

Item

99.1		Announcement, dated October 26, 2026, filed by Resolution Minerals Ltd with the Australian Securities Exchange.