Vishay Precision Group, Inc 10-K for FY2024
Vishay Precision Group, Inc. (VPG)
10-K
2025-02-25
For: 2024-12-31
View Original
Added on
April 08, 2026
About this 10-K
Vishay Precision Group, Inc filed this 10-K on February 25, 2025, covering the fiscal year ended December 31, 2024 (FY2024).
Headline figures
Fiscal year ended December 31, 2024, as reported in this filing, compared with the same period a year earlier where the filing states it.
- Revenue
- $306.52M
- down 13.7% from $355.05M a year earlier
- Net income
- $9.91M
- down 61.4% from net income of $25.71M a year earlier
- Diluted EPS
- $0.74
- down 60.6% from $1.88 a year earlier
UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
WASHINGTON, D.C. 20549
FORM 10-K
EXCHANGE ACT OF 1934
For the fiscal year ended December 31 , 2024
or
EXCHANGE ACT OF 1934
For the transition period from _______ to _______
Commission file number 1-34679
(Exact name of registrant as specified in its charter)
| (State or other jurisdiction of | (IRS employer identification no.) | ||||
| incorporation or organization) | |||||
(Address of principal executive offices)
(Registrant’s telephone number, including area code)
| Securities registered pursuant to Section 12(b) of the Act: | ||||||||
| (Title of class) | (Trading Symbol) | (Exchange on which registered) | ||||||
Securities registered pursuant to Section 12(g) of the Act: None
Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes o No ý
Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. Yes o No ý
Note – Checking the box above will not relieve any registrant required to file reports under Section 13 or 15(d) of the Exchange Act from their obligations under those Sections.
Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes ý No o
Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§ 232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files). Yes ý No o
Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company, or an emerging growth company. See definition of “accelerated filer”, “large accelerated filer”, “smaller reporting company”, and "emerging growth company" in Rule 12b-2 of the Act. (Check one):
| Large accelerated filer | ¨ | ý | ||||||||||||
| Non-accelerated filer | ¨ | Smaller reporting company | ||||||||||||
| Emerging growth company | ||||||||||||||
If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ¨ | ||||||||||||||
Indicate by check mark whether the registrant has filed a report on and attestation to its management’s assessment of the effectiveness of its internal control over financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C. 7262(b)) by the registered public accounting firm that prepared or issued its audit report. x
If securities are registered pursuant to Section 12(b) of the Act, indicate by check mark whether the financial statements
of the registrant included in the filing reflect the correction of an error to previously issued financial statements. o
Indicate by check mark whether any of those error corrections are restatements that required a recovery analysis of incentive-
based compensation received by any of the registrant’s executive officers during the relevant recovery period pursuant
to §240.10D-1(b).o
Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act). Yes ☐ No ý
The aggregate market value of the voting stock held by non-affiliates computed by reference to the price at which the common stock was last sold as of the last business day of the registrant’s most recently completed second fiscal quarter ($30.44 on June 29, 2024), assuming conversion of all of its Class B convertible common stock held by non-affiliates into common stock of the registrant, was $374,615,000 . There is no non-voting stock outstanding.
As of February 25, 2025, the registrant had 12,234,453 shares of its common stock and 1,022,887 shares of its Class B convertible common stock outstanding.
DOCUMENTS INCORPORATED BY REFERENCE
Portions of the registrant’s definitive proxy statement, which will be filed within 120 days of December 31, 2024, are incorporated by reference into Part III of this Annual Report on Form 10-K.
- 1 -
Vishay Precision Group, Inc.
Form 10-K for the year ended December 31, 2024
- 2 -
PART I
Item 1. BUSINESS DESCRIPTION
General
Vishay Precision Group, Inc. (“VPG,” the “Company,” “we,” “us” or “our”) is a global leader in precision measurement and sensing technologies that help power the future by bridging the physical world with the digital one. Many of our specialized sensors, weighing solutions, and measurement systems are “designed-in” by our customers, and address growing applications across a diverse array of industries and markets. Our products are marketed under brand names that we believe are characterized as having a very high level of precision and quality, and we employ an operationally diversified structure to manage our businesses.
Driven by the continued proliferation of data generated by the expanding use of sensors across a widening array of industrial and technology-driven applications, precision measurement and sensing technologies help ensure and deliver required levels of quality of mission-critical or high-value data. VPG’s products are often at the first stage of a data value chain (i.e., the process of converting the physical world into a digital format that can be used for a specific purpose) and as such impact the effectiveness of vast number of critical, high-value downstream processes. Over the past few years, we have seen a broadening of precision sensing applications in both our traditional industrial markets and new markets, due to the development of higher functionality in our customers' end products. Our precision measurement solutions are used across a wide variety of end markets upon which we focus, including test and measurement, industrial, transportation, steel, avionics, military and space, as well as other markets such as agriculture, consumer, and medical. The Company has a long heritage of innovation in sensor technologies that provide accuracy, reliability and repeatability that make our customers' products safer, smarter, and more productive. As the functionality of customers' products continues to increase, and they integrate more precision measurement sensors and related systems into their solutions, we believe this will offer substantial growth opportunities for our products and expertise.
Our History
On July 6, 2010, our company was spun off by Vishay Intertechnology, Inc. (“Vishay Intertechnology”) through a tax-free stock dividend of VPG stock to Vishay Intertechnology’s stockholders, and we became a publicly-traded company. Vishay Intertechnology was founded in 1962 by Dr. Felix Zandman to develop and manufacture the first generation of Bulk Metal® foil resistors and later, foil strain gages. Shortly after its founding, Vishay Intertechnology established itself as a technical and market leader in precision foil resistors, and foil strain gages. These innovations were the genesis of the products and technology that provide a unique strategic competitive advantage for VPG, as these products were transitioned to VPG from Vishay Intertechnology as part of the spin off.
In the decade prior to the spin-off, Vishay Intertechnology expanded our sensor and measurement business through acquisitions, extending our business from its initial focus on precision foil resistors and foil strain gages to include an array of load cell-based solutions.
Since becoming an independent company, we have made several acquisitions that have added to our strong, diverse, global manufacturing, sales and distribution network, which includes facilities in Canada, People's Republic of China, France, Germany, India, Israel, Japan, Sweden, Republic of China (Taiwan), the United Kingdom, and the United States.
We were incorporated in Delaware on August 28, 2009. Our principal executive offices are located at 3 Great Valley Parkway, Suite 150, Malvern, PA 19355. Our main telephone number is 484-321-5300.
Key Business Vision and Strategies
Our vision is to be a leading provider of precision measurement and sensing technologies, which include sensors, weighing solutions and measurement systems that deliver accuracy, reliability and repeatability that make our customers' products and processes safer, smarter, and more productive. VPG delivers in-depth, deep engineering expertise to the design and manufacture of non-commodity sensors, weighing solutions and precision measurement systems that optimize and enhance our customers’ solutions performance across a broad array of end markets.
Our strategy is to leverage our core technologies and competitive position in both existing and new markets to accelerate our organic growth, as well as to augment that growth by acquiring complementary precision measurement and sensing businesses. Specifically, we are focused on the following strategies:
- 3 -
Operationally Diversified
Each of VPG's business segments maintains and deploys distinct go-to-market strategies, technical expertise, capital requirements, and acquisition opportunities. We use an operationally diversified strategy and structure to be close to our customers and to leverage our high-level engineering expertise to optimize and enhance the performance of our customers' solutions. We seek to maximize the performance and value of our businesses by leveraging our accumulated experience, methodologies, and expertise in driving operational excellence across our functional areas, as well as in the allocation of capital and investment.
Optimize Core Competence
The Company’s core competencies include our innovative deep technical and applications-specific expertise, our strong brands and customer relationships, our focus on operational excellence, our ability to select and develop our management teams, and our proven M&A strategy. We continue to optimize all aspects of our development, manufacturing and sales processes, including by increasing our technical sales efforts; continuing to innovate in product performance and design; and refining our manufacturing processes.
Our Sensors segment research group developed innovations that enhance the capability and performance of our strain gages, while simultaneously reducing their size and power consumption as part of our advanced sensors product line. We believe this unique foil technology will create new markets as customers “design in” these next generation products in existing and new applications. Our development engineering team is also responsible for creating new processes to further automate manufacturing, and improve productivity and quality. Our advanced sensors manufacturing technology also offers us the capability to produce high-quality foil strain gages in a highly automated environment, which we believe results in reduced manufacturing and lead times, improved quality and increased margins. As a sign of our commitment to these businesses, we signed a long-term lease for a state-of-the-art facility that has been constructed in Israel and fully transitioned to this facility in the third quarter of fiscal 2021.
We also seek to achieve significant production cost savings through the transfer, expansion, and construction of manufacturing operations in countries such as India, Japan, and Israel, where we can benefit from improved efficiencies or available tax and other government-sponsored incentives. In the past several years, we incurred restructuring expense related to closing and downsizing of facilities as part of the manufacturing transitions of our load cell products to facilities in India, which marked key milestones in our ongoing strategic initiatives to align and consolidate our manufacturing footprint.
Organic Growth
Our product portfolio is focused, to a significant extent, on specialty products serving niche markets. The development of specialty products requires us to form long-term relationships with our customers. Our specialty products are usually designed, or engineered, to meet unique specifications for OEMs. This often results in our customers creating a non-standard part number used solely to designate our product on their bill of materials. We call this customer activity a “design win.” This activity may create organic growth as the OEM customer begins to order increasing quantities to meet their production requirements, with little or no opportunity to purchase a similar part from competing suppliers. The “design in” time for these initiatives is typically 12 to 24 months.
We expect to continue to use our research and development, engineering, and product marketing resources to introduce new and innovative specialty products. An example of our success in this regard is the recent acceptance and growth of our on-board vehicle weighing solution incorporating micro-electromechanical systems ("MEMS") technology. Our ability to react to changing customer needs, emerging markets, and industry trends will continue to be a key to our success.
Our design, research, and product development teams, in partnership with our marketing teams, drive our efforts to bring innovations to market. We intend to leverage our insights into customer demand to continually develop and roll out new, innovative products within our existing lines and to modify our existing core products in ways that make them more appealing, addressing changing customer needs and industry trends in terms of form, fit, and function.
Growth from Acquisitions
Since becoming a public company, we have acquired six businesses utilizing stringent financial, market, operational, and valuation criteria:
•In 2013, we completed our first acquisition as an independent public company when we acquired substantially all of the assets of the George Kelk Corporation ("KELK"). KELK engineers, designs and manufactures highly accurate optical and electronic roll force measurement and control equipment primarily used by metals rolling mills and mining applications throughout the world.
- 4 -
•On December 30, 2015, we completed the acquisition of Stress-Tek, Inc. ("Stress-Tek") based in Kent, Washington. Stress-Tek designs and manufactures state-of-the-art, rugged and reliable strain gage-based load cells and force measurement systems. Stress-Tek primarily operates in North America, where their sensors and display systems are used in a wide range of industries, predominantly in transportation and trucking, for timber, refuse, aggregate, mining, and general trucking applications.
•On April 6, 2016, we completed the acquisition of Pacific Instruments, Inc. ("Pacific Instruments") based in Concord, California. Pacific Instruments designs and manufactures high-performance signal conditioning, data acquisition and control systems and has extensive experience integrating these systems. Pacific Instruments sells primarily to the aerospace, commercial aviation and defense markets in the United States.
•On November 1, 2019, we completed the acquisition of New York-based Dynamic Systems Inc. ("DSI"), a provider of specialized dynamic thermal-mechanical test and simulation systems used to develop new metal alloys and optimize production processes. DSI is an established, high margin business, with a strong brand and has the largest installed base of products of its type in the world, according to market estimates. DSI expands our position in the steel market and offers opportunities for growth by leveraging our sales capabilities and market presence, and by expanding DSI’s product line to address new opportunities.
•On June 1, 2021, we completed the acquisition of California-based Diversified Technical Systems, Inc. (“DTS”), a leading manufacturer of data acquisition systems and sensors for product and safety testing. DTS's embedded data acquisition and data logging products expands our offerings to the automotive and avionics, military, and space markets. We believe DTS will continue to benefit from the global need for specialized safety testing that is expanding from the automotive and avionics sectors to sports applications. As a result of our acquisition, we acquired a leased manufacturing, engineering, sales and administrative facilities in Seal Beach, California and Novi, Michigan.
•On September 30, 2024, we completed the acquisition of Nokra Optische Prueftechnik und Automation GmbH ("Nokra"), a Germany-based, privately held maker of precision measuring and testing equipment for manufacturing. Nokra’s laser-based measuring systems expand our existing measurement and inspection solutions for steel and aluminum rolling mills, as well as for the metal processing industry. Nokra’s laser-based measurement gauge systems are used to precisely measure the thickness, flatness, contour, width or 3D profile of various metals depending on the application, in both inline and offline production.
We expect to continue to make strategic acquisitions where opportunities present themselves to grow and expand our segments. Our acquisition strategy is focused on identifying and acquiring high-value, growing technology-driven businesses that augment, expand and/or leverage our current offering in precision measurement and sensor markets. We expect to expand our expertise and acquisition focus to other precision measurement solutions, including in the fields of measurement of force, weight, pressure, torque, tilt, motion, and acceleration. We believe acquired businesses will benefit from improvements we implement to reduce redundant functions and from our current global manufacturing and distribution footprint.
Leverage Global Brand
While our acquisitions provided us an array of strong brand names, in addition to our historical resistor and strain gage brands, we believe the continued success of our strategy is best served by the establishment of a strong overall global brand. The “VPG” brand leverages the strength of these historical brands under the umbrella of a unified, globally recognizable VPG name. We continue to broaden and emphasize the VPG brand in the markets we serve under the following brands for each of our business segments:
| Sensors | Weighing Solutions | Measurement Systems | ||||||||||||
| VPG Foil Resistors | VPG Transducers | KELK | ||||||||||||
| - VFR | - Celtron | Dynamic Systems Inc. or Gleeble | ||||||||||||
| - Alpha Electronics | - Revere | DTS | ||||||||||||
| -Powertron | - Sensortronics | Pacific Instruments | ||||||||||||
| - APR | - Tedea-Huntleigh | Nokra | ||||||||||||
| Micro-Measurements | VPG Onboard Weighing | |||||||||||||
| Stress-Tek | ||||||||||||||
| Vulcan | ||||||||||||||
| BLH Nobel | ||||||||||||||
- 5 -
Business Segments and Products
Each of VPG's business segments maintains and deploys specific go-to-market strategies, technical expertise, capital requirements, and acquisition opportunities, which are in line with our operationally diversified structure and strategy. VPG reports in three product segments: Sensors, Weighing Solutions, and Measurement Systems.
Sensors
The Sensors segment is comprised of our precision resistor and strain gage businesses. Precision resistor products offer superior precision, stability, and reliability. Our resistor portfolio encompasses a wide variety of configurations and packages designed to meet the requirements of even the most demanding applications.
Precision resistors are the most precise and stable type of resistors currently available. Resistors are basic components used in all forms of electronic circuitry to adjust and regulate levels of voltage and current. Our current sense resistors were developed with a low absolute TCR and Kelvin connections to meet the demand of stable resistive products.
Our precision resistors are based on Bulk Metal Foil® technology and are used in diverse applications, which require a high degree of precision and stability. The main market segments for our precision resistors are as follows: avionics & military, space communications, fiber optics, industrial automation, EV battery management infrastructure, precision weighing, and test & measurement including semiconductor test and production, among others. Foil resistors are marketed under four different brands: VFR, Alpha Electronics, Powertron and APR. APR is our off-the-shelf commercial product line based on AEC-Q200 standardization. To complement our extensive portfolio of high-performance precision resistors, we also offer decade boxes, standard resistors, exceptional precision thin film and power resistors including special construction configurations to meet the requirements of high temperature applications. We have a road map of new technology products to meet the required needs of our customers.
Our strain gage products, which include our advanced sensors, are resistive sensors that are attached to the surface of an object to determine the surface strain caused by an applied force. Marketed under the well-known Micro-Measurements brand, our strain gages are used for OEM and in stress analysis applications for structural testing in the aviation, military and space, infrastructure, and construction markets, along with force measurement and weighing markets. Typical applications of strain gages include test and measurement applications where the strength of the object is the main consideration and the object under test is a structural component in a machine or device, such as an automobile, an aircraft, or a highway bridge. Strain gages are also used inside precision transducers where the magnitude of an applied force is the focus of the measurement. Using strain gages attached to metal components, a variety of physical measurements can be made including force, weight, pressure, displacement, and acceleration. Our innovative advanced sensors product line enhances the capability and performance of our strain gages, while simultaneously reducing their size and power consumption. Emerging applications for our advanced sensors include industrial and medical robotics, as well as for consumer products.
A portion of our strain gage products are sold to third parties as “standard catalog items”, while the remainder of these products are sold as non-standard and/or custom products to third parties and to our Weighing Solutions segment. Strain gage products are sold across several of our market sectors, with a significant portion being sold to consumer end markets.
The products in the Sensors segment are primarily based on our resistive foil technology, which continues to evolve and enables many products in both segments to be suited for new and varied applications.
The manufacturing of the foil material is a critical and common component of the Company’s strain gage and precision foil resistor operating segments, and as a result, we experience synergies between our precision resistor and strain gage operating segments. The production cycles for precision resistors and strain gages are similar and many of the same raw materials are utilized in the manufacturing processes for both operating segments. The foil resistor and strain gage products require a similar level of labor and capital. However, the advanced sensors’ manufacturing technology offers us the capability to produce high-quality foil strain gages in a highly automated environment, which we believe results in reduced manufacturing costs and lead times, higher quality, and increased margins.
Weighing Solutions
The Weighing Solutions segment is comprised of our VPG Transducers, VPG Onboard Weighing, BLH Nobel, Stress-Tek and Vulcan businesses.
VPG Transducers offers a broad line of load cells and force measurement transducers, which also known as force sensors, that are offered as precision sensors for industrial and commercial use. Typical applications for force sensors are in construction machinery for stability control or overload protection, agricultural equipment for precision force measurement, and medical devices such as hospital beds and medication dosing. The heavy equipment market has begun to adopt load cell technology as process control and equipment control features for their products. In some cases, these products use our strain gage products,
- 6 -
which serve as sensing elements and components within each unit. Further integration of our load cell technology is also offered as part of our weighing module products, which provide customers with a complete sensor assembly that may be used within a wide variety of digital transducers.
A transducer is mounted on a structure that is subjected to weight or other forces, such as the platform of an industrial scale. The term “load cell” is primarily used to describe transducers used in weighing applications. Strain-gage based transducers consist of one or more strain gages bonded to a metallic structure. The change in resistance of the strain gages in response to strain of the transducer by the applied load is detected by electronic instrumentation calculating the force detected or weight. Transducers are manufactured with different designs and configurations depending on their application and the type of stress or strain to be measured; for example, weight or tension. We produce both analog and digital transducers. Modules are transducers combined with a mounting and with external features, such as instruments and cables, and are used for weighing and control applications. We sell our load cells and modules under the overall VPG Transducers name as we continue to transition from the previously used Celtron, Revere, Sensortronics, and Tedea-Huntleigh brands.
Approximately half of VPG Transducer load cell products are sold to third parties as “standard catalog items,” but a growing sector of this segment’s products are sold as non-standard and/or custom products to third parties including OEM manufacturers. Our sales teams act as direct sales channels (field application engineers or “FAEs”) utilizing the primary customer interface relating to initial design specifications, development of prototypes, and pricing/delivery of this segment’s products. Distributors are also used for those customers that desire standard products.
Our VPG Onboard Weighing, Stress-Tek, and Vulcan businesses specialize in high-quality, high-accuracy vehicle weighing and over-load monitoring systems for all commercial vehicle types, including trucks, vans, specialty vehicles, and special scale systems used for aircraft weighing and portable truck weighing. Onboard weighing systems are installed in logging and waste handling trucks. Many of these products use solid-state sensors. VPG Onboard Weighing products, sold under the brand names TruckWeigh, VanWeigh, and Load Pro in the United States, are used by drivers and fleet operators to monitor vehicle loads within legally permitted limits and regulations.
The BLH Nobel business mainly provides load cells and instrumentation for weighing and force control/measurement for a variety of uses. These include systems to control process weighing in food, chemical, and pharmaceutical plants; force measurement systems used to control web tension in paper mills, cable tension in winch controls.
Major components that comprise our Weighing Solutions products include: load cells, electronic displays, signal processors, MEMS sensors, cabling, system software, and communications software/hardware. The end use for the majority of these products is the precision measurement of force, weight, pressure, torque, tilt, motion, and acceleration. FAEs are utilized as the primary customer interface relating to initial design specifications, development of prototypes, and pricing/delivery of this segment's products. We also use distributors and sales agents, as appropriate, to market, sell, and support certain products in this segment.
Measurement Systems
The Measurement Systems segment includes highly specialized systems for steel production, materials development, and safety testing. This segment is comprised of our KELK, Nokra, DSI, Pacific Instruments and DTS businesses.
Our KELK business provides high accuracy and performance sensors and systems for the steel and aluminum industries, and within those industries, mainly for rolling mills. KELK's products include rolling force measuring load cell systems and pressure transmitters; web tension measurement load cells and systems; optical strip width gages; laser velocimeters for speed and length measurements, and closed-loop crop optimization control systems for optimal strip cuts. Our products are required to meet the most demanding requirements of the steel and aluminum industries, providing high accuracy and reliability under the most demanding harsh conditions of rolling mills.
Our Nokra business offers high-quality measurement and testing systems for use in manufacturing. The systems measure and test geometric features such as length, width, thickness, profile, shape, and position. Nokra’s laser-based measuring systems expand upon our existing KELK measurement and inspection solutions for steel and aluminum rolling mills, as well as for the metal processing industry around the world.
Our DSI business specializes in thermal-mechanical simulation systems for metallurgical research. Marketed under the name "Gleeble®", DSI's line of physical simulation systems are used by universities, research departments, and development departments within the steel ecosystem to accelerate the development of new metal alloys, explore new production techniques, optimize existing processes, or simulate the conditions a material will face in the real world.
- 7 -
Our Pacific Instruments business offers a broad range of high performance signal conditioning, data acquisition and control systems, many of which reach customers outside our traditional commercial customer base, such as U.S. government-related customers.
Our DTS business provides data acquisition systems and sensors for product safety testing. As a major supplier of embedded data acquisition and data logging capabilities for crash test dummies, DTS expands our offering in the automotive market and in the avionics, military and space market. We believe DTS will continue to benefit from the global need for specialized safety testing technology that is expanding from the automotive and avionics sectors to other applications such as sports safety.
Qualifications and Specifications
Certain of our products must be qualified or approved under various military and aerospace specifications and other standards.
We have qualified certain of our foil resistor and sensor products under various military specifications approved and monitored by the United States Defense Logistics Agency (“DLA”), under certain European military specifications, and various aerospace standards approved by the U.S. National Aeronautics and Space Administration (“NASA”) and the European Space Agency (“ESA”).
Qualification and specification levels are based in part upon the rate of failure of products. We must continuously perform tests on our products, and report the results for qualified products to the qualifying organization. If a product fails to meet the requirements for the applicable classification level, the product’s classification may be suspended or reduced to a lower level. During the time that the classification is suspended or reduced, net revenues and earnings attributable to that product may be adversely affected.
Certain of our load cell and instrumentation products are approved by the National Type Evaluation Program (“NTEP”) and International Organization of Legal Metrology (“OIML”). Many of our weighing systems must also meet these standards to make them usable for legal-for-trade weighing applications. Products and systems that are to be used in hazardous areas, where explosive atmospheres might exist, must comply with special safety standards, such as the European Atmosphère Explosible (“ATEX”) Standard and the U.S. Factory Mutual (“FM”) Standard. Our load cell manufacturing sites undergo periodic audits by regulatory authorities in order to verify compliance with standard requirements and to extend product approvals.
Manufacturing Operations
Our principal manufacturing facilities are located in Israel, the United States, Canada, India, Germany, and Japan. We also have manufacturing facilities in Sweden, the United Kingdom, the Republic of China (Taiwan), and France. Over the past several years, we have invested substantial resources to increase capacity and to enhance automation in our plants, which we believe will further reduce production costs.
We have quality management systems at all of our major manufacturing facilities approved under the ISO 9001 Quality Management Systems Standard. ISO 9001 is a comprehensive set of quality program standards developed by the International Organization for Standardization ("ISO").
The quality management system in our major foil resistors manufacturing site is certified against Aerospace Standard AS 9100.
Our third-party major load cells manufacturer as well as our third-party Onboard Weighing manufacturer have quality management systems certified to Automotive Standard IATF 16949.
Our DTS business unit, manufacturing data acquisition systems, data loggers and sensors for critical testing for aerospace, military, crash safety, is certified to ISO/IEC 17025 standard. Compliance to this standard ensures that the DTS facilities operate quality management systems, are technically competent and generate technically valid results.
To maintain our cost competitiveness, we are pursuing our strategic initiatives to shift manufacturing emphasis to more advanced automation in higher-labor-cost regions and to relocate production to regions with skilled workforces and relatively lower labor costs. See additional information in Item 7 “Management’s Discussion and Analysis of Financial Condition and Results of Operations – Cost Management” related to our restructuring efforts.
Sources of Supplies
Although most materials incorporated in our products are available from a number of sources, certain materials are available only from a relatively limited number of suppliers. The principal materials used in our products include various metallic foil alloys, aluminum, stainless steel, tool steel, plastics, and for a few products, gold. Some of the most highly specialized materials for our sensors are sourced from a single vendor. We maintain a safety stock inventory of certain critical materials at our
- 8 -
facilities. We are taking steps to determine the use, source, and origin of any tin, tantalum, tungsten, or gold in our global product portfolio and, if appropriate, would work with our suppliers to remediate issues and source more responsibly.
A portion of our Weighing Solutions and Measurement Systems segment products are based on strain gages produced by our Sensors segment.
Inventory and Backlog
We manufacture both standardized products and those designed and produced to meet customer specifications. We maintain an inventory of standardized components, and monitor the backlog of outstanding orders for our products.
We include in our backlog only open orders that have been released by the customer for shipment in the next twelve months. Many of our customers for strain gages, load cells, and foil resistors encounter uncertain and changing demand for their products. They typically order products from us based on their forecasts. If the customers' business needs change, they may cancel or reschedule the shipments that are included in our backlog, in many instances without the payment of any penalty. Therefore, the backlog at any point in time is not necessarily indicative of the results to be expected for future periods.
Customers and Marketing
Our customer base is diversified in terms of industry, geographic region, and range of product needs. No single customer comprises greater than 10% of net revenues. A portion of our products are used in the broad industrial market for wide variety of applications in waste management, bulk hauling, logging, scales manufacturing, engineering systems, pharmaceutical, oil, chemical, steel, paper, and food industries. In addition, we sell to an expanding array of end markets including test and measurement, steel, medical, construction, agricultural, and consumer.
Many of our products have historically been sold by dedicated sales forces, consisting mainly of FAEs focusing on specific market segments or specific customers. The FAEs help identify the products in our portfolio that best meet the needs of our customers and provide technical and applications support. Their in-depth knowledge of customer needs is a key factor in new product design and future research and development initiatives.
Competition
Our competitive success depends on our ability to maintain a competitive advantage on the basis of superior product capability and performance, product quality, know-how, proprietary data, market knowledge, service capability and business reputation. Price competitiveness can be an important factor, especially within our Weighing Solutions segment. Our sales and marketing programs offer our customers a broad range of world-class precision technologies, and superior global sales and support.
Competition in the markets where we sell the bulk of our products is extremely fragmented, both geographically and by application. To our knowledge, there are no competitors with the same product mix and proprietary technology as ours. Our competitors range from very small, local companies to large, international companies with greater financial resources than us.
Our foil resistors and our strain gages are based on our proprietary technology. Competitors try to compete in this market using different technology to offer functionally equivalent products. Examples of competition in our Sensors segment includes KOA, Bourns, Vishay Intertechnology, TT Electronics, Susumu, Isabellenhute, Caddock and Flat Dashi for foil resistors and HBK, an operating company of Spectris, Tokyo Sokki Kenkyujo Co., Ltd (TML), Kyowa and Zemic for strain gages. Competitors in our Weighing Solutions segment include HBK, Zemic, and Utilcell for load cell products, Air-Weigh and Vehicle Weighing Systems for onboard weighing products. In the Measurement Systems segment, we compete with ABB, IMS and Fuji in the steel market and Kistler for data acquisition systems.
Research and Development
Many of our products, manufacturing techniques, and technologies have been invented, designed, and developed by our engineers and scientists. Special proprietary resistive metal foil is the most important material in both our foil resistors and our foil strain gages, and our research and development activities related to foil materials are an important linkage between these two products.
We maintain strategically placed design centers for each of our business segments where proximity to customers enables us to more easily monitor and satisfy the needs of local markets. These design centers are located in the United States, Israel, Canada, Sweden, Japan, the United Kingdom, and Germany.
We also maintain research and development staff, and promote programs at a number of our production facilities to develop new products and new applications of existing products, and to improve manufacturing techniques. This decentralized approach encourages individualized product development at specific manufacturing facilities that occasionally has applications at other facilities.
- 9 -
Our research and development staff and our sales force are closely linked. Our sales force is comprised of individuals with an engineering background who can help meet the needs of our customers for technical and applications support. This in-depth knowledge of customer needs and specifications is a key factor in future research and development initiatives.
Research and development will continue to play a key role in our efforts to introduce innovative products for new sales, and to improve profitability. We expect to continue to expand our position as a leading supplier of precision foil technology products. We believe our R&D efforts should provide us with a variety of opportunities to leverage technology, products, and our manufacturing base and, ultimately, our financial performance. To that end, we expect to sustain or increase our R&D expenditures in order to fill the product development pipeline and lay the foundation for future sales growth.
Patents and Licenses
We have made a significant investment in securing intellectual property protection for our technology and products. We seek to protect our technology by, among other things, filing patent applications for technology considered important to the development of our business. Although we have numerous United States and foreign patents covering certain of our products and manufacturing processes, no particular patent is considered individually material to our business. We also rely upon trade secrets, unpatented know-how, and continuing technological innovation.
Our ability to compete effectively with other companies depends, in part, on our ability to maintain the proprietary nature of our technology. Although we have been awarded, have filed applications for, or have obtained numerous patents in the United States and other countries, there can be no assurance concerning the degree of protection afforded by these patents, or the likelihood that pending patents will be issued.
We require all of our technical, research and development, sales and marketing, and management employees, and most consultants and other advisors to execute confidentiality agreements upon the commencement of employment, or consulting relationships with us. These agreements provide that all confidential information developed, or made known to the entity or individual during the course of the entity’s or individual’s relationship with us, is to be kept confidential and not disclosed to third parties except in specific circumstances. Substantially all of our technical, research and development, sales and marketing, and management employees have entered into agreements providing for the assignment to us of rights to inventions made by them while employed by us.
Environmental, Social and Governance
As part of our launch of a corporate Environmental, Social and Governance ("ESG") program, we completed a materiality assessment, developed a multi-year ESG plan, and established an internal scorecard with short and long-term objectives.
The implementation of our multi-year ESG plan continues to be on track as evidenced by our actions over the past year, which include the issuance of the first VPG Sustainability Report in October 2024 that details its risks and opportunities, further measurement and progress on material ESG topics during 2022-2023 that culminated in the capture and reporting of Scope 1 and Scope 2 emissions using the latest Greenhouse Gas (GHG) Protocol. Our multi-year ESG plan is reviewed yearly and remains built on four pillars: Our People, Our Environment, Our Governance and Our Products, and continues to serve as a guiding framework that will be added to as new trends, requests from stakeholders and internal business strategies require.
We have issued an Environmental, Health and Safety Policy that sets forth our commitment to achieving health and safety for employees and protecting of the environment, to maintaining compliance with applicable environmental, health and safety laws, to promoting proper management of hazardous materials, and to minimizing the hazardous materials generated in the course of our operations. In addition, our manufacturing operations are subject to various regional, federal, state, and local laws restricting discharge of materials into the environment. Since we are subject to Environmental, Health and Safety laws worldwide we incur capital and operating expenditures and other costs to comply with such laws and any investigations of us related to such laws.
Human Capital
As of December 31, 2024, we employed approximately 2,200 total employees, substantially all of which were full-time employees. Approximately 82% of our employees were located outside the United States. Our future success is substantially dependent on our ability to attract and retain highly qualified technical and administrative personnel. Some of our employees outside the United States are members of trade unions.
We support worldwide employment and promotion of diversity to innovate and drive long-term value, by continuous monitoring of compensation and benefits to assure competitiveness, while implementing a worldwide talent strategy that includes workforce planning and succession planning.
- 10 -
We have had no employee strikes or work stoppages due to labor disputes and we consider our relationship with employees to be generally good, however, no assurance can be given that labor unrest or strikes will not occur. We continue to support employee’s rights to collective bargaining and other recognized employee interests to organize.
Information about our Executive Officers
The following table sets forth certain information regarding our executive officers as of February 25, 2025:
| Name | Age | Positions | |||||||||
| Ziv Shoshani | 58 | Chief Executive Officer, President, and Director | |||||||||
| William M. Clancy | 62 | Executive Vice President and Chief Financial Officer | |||||||||
| Amir Tal | 55 | Executive Vice President and Chief Accounting Officer | |||||||||
Ziv Shoshani is our Chief Executive Officer and President, and also serves on the Board of Directors. Mr. Shoshani was Chief Operating Officer of Vishay Intertechnology from January 1, 2007 to November 1, 2009. During 2006, he was Deputy Chief Operating Officer of Vishay Intertechnology. Mr. Shoshani was Executive Vice President of Vishay Intertechnology from 2000 to 2009 with various areas of responsibility, including Executive Vice President of the Capacitors and the Resistors businesses, as well as heading the Measurements Group and Foil Divisions. Mr. Shoshani had been employed by Vishay Intertechnology since 1995. He continues to serve on the Vishay Intertechnology board of directors. Mr. Shoshani is a nephew of Mrs. Ruta Zandman, the widow of the late Dr. Felix Zandman, the founder of Vishay Intertechnology.
William M. Clancy is our Executive Vice President and Chief Financial Officer. Mr. Clancy was Corporate Controller of Vishay Intertechnology from 1993 until November 1, 2009. He became a Vice President of Vishay Intertechnology in 2001 and a Senior Vice President of Vishay Intertechnology in 2005. Mr. Clancy served as Corporate Secretary of Vishay Intertechnology from 2006 to 2009. From June 16, 2000 until May 16, 2005 (the date Vishay Intertechnology acquired the noncontrolling interest in Siliconix incorporated), Mr. Clancy served as the principal accounting officer of Siliconix. Mr. Clancy had been employed by Vishay Intertechnology since 1988. Mr. Clancy is a licensed CPA in Pennsylvania.
Amir Tal is our Executive Vice President and Chief Accounting Officer. Mr. Tal was appointed by the Board of Directors to such position effective February 5, 2020. He served as the Company’s Senior Vice President, Finance from March 2017 until February 2020. From July 2010 to February 2017, Mr. Tal served as the Company’s Vice President Operational Controller and Regional Controller Israel. Mr. Tal holds a bachelor’s degree in economics and business administration from the University of Haifa and an MBA from Bar Ilan University.
Company Information and Website
We began filing annual, quarterly, and current reports, proxy statements, and other documents with the Securities and Exchange Commission (“SEC”) under the Securities Exchange Act of 1934, as amended (the “Exchange Act”), after our spin-off from Vishay Intertechnology on July 6, 2010. The SEC maintains an Internet website that contains reports, proxy and information statements, and other information regarding issuers, including us, that file electronically with the SEC. The public can obtain any documents that we file with the SEC at www.sec.gov.
In addition, our company website can be found on the Internet at www.vpgsensors.com. The website contains information about us and our operations. Copies of each of our filings with the SEC on Form 10-K, Form 10-Q, Form 8-K, and all amendments to those reports, can be viewed and downloaded free of charge as soon as reasonably practicable after the reports and amendments are electronically filed with or furnished to the SEC. To view the reports, access http://ir.vpgsensors.com and click on “Financials”/ “SEC Filings.”
The following corporate governance related documents, as may be amended from time to time, are also available on our website:
•Compensation Committee Charter
•Nominating and Corporate Governance Committee Charter
•Audit Committee Charter
•Global Code of Business Conduct
•Code of Ethics Applicable to the Chief Executive Officer, Chief Financial Officer, and Principal Accounting Officer or Controller
•Corporate Governance Principles
•Policy Regarding Qualifications of Directors
•Anti-Bribery and Anti-Corruption Policy
•Supplier Code of Conduct
- 11 -
•Information Security Report
•By-Laws of Vishay Precision Group Inc.
•Insider Trading Policy
•Dodd-Frank Clawback Policy.
To view these documents, access http://ir.vpgsensors.com and click on “Sustainability-Governance” and then on “Governance” and then on "Governance Documents."
To view our Ethics Program Reporting Procedures, access http:/www.vpgsensors.com/Ethics
We are not incorporating by reference into this Annual Report on Form 10-K any material from our website.
Any of the above documents can also be obtained in print by any stockholder, upon written request to our Investor Relations Department at the following address:
Corporate Investor Relations
Vishay Precision Group, Inc.
3 Great Valley Parkway, Suite 150
Malvern, PA 19355
- 12 -
Item 1A. RISK FACTORS
You should carefully consider the following risks and other information in this Form 10-K in evaluating our company and common stock. Any of the following risks, as well as additional risks and uncertainties not currently known to us or that we currently deem immaterial, could materially and adversely affect our business, results of operations or financial condition, and could also adversely affect the trading price of our common stock.
Risks Related to Our Business
A shortage of qualified labor could have a material adverse effect on our business and results of operations.
Labor is a significant component of operating our business. A number of factors may adversely affect the labor force available to us or increase labor costs, including general macroeconomic conditions, high employment levels, federal unemployment subsidies, increased wages offered by other employers, vaccine mandates and other government regulations, and our responses thereto. Outside suppliers that we rely on have also experienced shortages of qualified labor. A prolonged shortage of qualified labor could, among other things, decrease our ability to effectively produce and meet customer demand, and could have a material adverse effect on our business and results of operations.
We face intense competition in our business.
We face various degrees and types of competition throughout the world in our different businesses. We are a leading supplier of foil resistors and foil strain gages. Foil resistors and foil strain gages are also produced by competitors, principally located in China. We believe that our products provide superior performance relative to our competitors, but that could change if our competitors succeed in developing and introducing innovative competitive offerings. Also, our foil strain gages compete with other types of strain gages, such as semiconductor strain gages, which we do not manufacture. We believe that other types of strain gages are not as reliable or stable as our foil strain gages, but that could change as the technology for these other products continues to evolve. If our competitors are able to improve the quality, performance, or pricing of their products relative to our offerings, our results of operations could be adversely affected.
The market for transducer/load cell products is highly fragmented and very competitive. Our load cell modules and systems face competition from numerous other load cell module and systems manufacturers. Competition for modules and systems is most often based on customer relationships, product reliability, technical performance, and the ability to anticipate and satisfy customer needs for specific design configurations. Many other manufacturers have more experience in particular geographic markets and specific applications than we do, and may be better positioned to compete in these areas. We cannot assure you that we will be able to successfully grow our business in the face of these competitive challenges.
To remain successful, we must continue to innovate, and our investments in new technologies may not prove successful.
Our future operating results depend on our ability to continually develop, introduce, and market new and innovative products, to modify existing products, to respond to technological change, and to customize certain products to meet customer requirements. There are numerous risks inherent in this process, including the risks that we will be unable to anticipate the direction of technological change, that customers may be unwilling, or unable, to adopt the new products or methods of using them, that we will be unable to develop and market new products and applications in a timely fashion to satisfy customer demands, or that such products will experience quality or other qualification issues with our customers as they, and we, gain experience with qualifying them and using them. If this occurs, we could lose customers and experience adverse effects on our financial condition and results of operations.
We may not be successful in future acquisitions or other strategic transaction endeavors, if any, which could have an adverse effect on our business and results of operations.
Historically, we expanded our business in part by completing acquisitions, and we expect that an important element of our business strategy will continue to be expansion through acquisition. We cannot assure that we will identify, have the financial capabilities to execute, and/or successfully complete strategic transactions with suitable partners in the future. We also cannot assure that any such transactions that we do complete in the future will be successful.
Such transactions involve a number of risks, including the following:
•we may incur substantial costs, including advisory fees and diversion of management attention, in evaluating a potential transaction, whether or not the transaction is consummated;
•we may be unable to achieve the anticipated benefits from the transaction;
•we may have difficulty integrating the operations, personnel and culture of an acquired business, and may have difficulty retaining the key personnel of the acquired business;
•we may have difficulty enforcing restrictive covenants against the seller of the acquired business or former employees or other personnel of the acquired business;
- 13 -
•we may have difficulty incorporating acquired technologies or products into our existing solutions;
•our ongoing business and management's attention may be disrupted or diverted by transition or integration issues, and the complexity of managing geographically and culturally diverse locations; and
•we may lose customers of those companies, or may lose our customers due to the change in control or for other reasons.
The factors noted above could have a material adverse effect on our business, results of operations, and financial condition or cash flows, particularly in the case of a larger acquisition. From time to time, we may enter into negotiations for acquisitions or investments that are not ultimately consummated. These negotiations could result in significant diversion of management time, as well as out-of-pocket costs.
Future acquisitions may require us to incur or issue additional indebtedness or issue additional equity.
If we were to undertake future substantial acquisitions for cash, these acquisitions would likely need to be financed in part through bank borrowings, or the issuance of public or private debt. This acquisition financing would likely adversely affect certain credit metrics. Our revolving credit facilities require us to obtain the lenders’ consent for certain additional debt financing and to comply with other covenants, including the application of specific financial ratios. We cannot assure that the necessary acquisition financing would be available to us on acceptable terms, if and when, required. If we were to make an acquisition with equity, the acquisition may have a dilutive effect on the interests of the holders of our common stock.
We may experience difficulties, delays, or unexpected costs in completing our cost reduction programs.
To remain competitive, particularly when business conditions are difficult, from time to time we take steps to reduce our cost structure by restructuring our existing businesses to achieve efficiencies, eliminate redundant functions, facilities and staff positions, and move operations, where possible, to reduce labor or other costs.
We may not realize, in full or in part, the anticipated benefits of these programs without encountering difficulties, which may include complications in the transfer of production knowledge, loss of key employees and/or customers, and the disruption of ongoing business. Any of these difficulties could delay and/or undermine our ability to realize the benefits of these cost reduction programs, as well as potentially adversely affecting our customer relationships and operations.
Our business is cyclical, and in periods of increased economic strength, we may experience greater than expected demand for our products. If our cost reduction programs and related restructuring result in us not being able to satisfy our customer’s demand for products during a rising economy, and our competitors sufficiently expand production, we could lose customers and/or market share. These losses could have an adverse effect on our operations, financial condition, and results of operations.
We may encounter difficulties in the implementation or operation of new enterprise resource planning systems.
We have implemented, and continue to implement, new enterprise resource planning (“ERP”) systems in different parts of our business. ERP systems are integral to our ability to accurately and efficiently manage our manufacturing and sales activities, and provide critical business information to management. The implementation of an ERP system may cause us to incur additional costs, shipment delays, and related customer dissatisfaction; expend employee (including Company management) time and attention; and otherwise burden our internal resources. Any difficulties we encounter with the implementation or successful operation of an ERP system could damage the effectiveness of our business processes and could adversely impact our ability to accurately and effectively forecast and manage sales demand, manage our supply chain, and report management information on an accurate and timely basis, any of which could have a material adverse effect on our business and results of operations.
Our success is dependent upon our ability to protect our proprietary technology and other intellectual property.
We rely on a combination of the protections provided by applicable patent, trademark, copyright, and trade secret laws, as well as on confidentiality procedures and other contractual arrangements, to establish and protect our rights in our technology, and related materials and information. We enter into agreements with our customers and distributors. These agreements contain confidentiality and non-disclosure provisions, a limited warranty covering our products, and indemnification for the customer from infringement actions related to our products.
Despite our efforts, it may be possible for others to copy portions of our products, reverse engineer them, or obtain and use information that we regard as proprietary, all of which could adversely affect our competitive position. Furthermore, there can be no assurance that our competitors will not independently develop technology similar to ours. The laws of certain countries in which we manufacture do not protect our intellectual property (“IP”) rights to the same extent as the laws of the United States. In the Office of the United States Trade Representative (“USTR”) annual “Special 301” Report released in April 2024, the adequacy and effectiveness of intellectual property protection in a number of foreign countries were analyzed.
A number of countries in which we manufacture or do business in are identified in the report as being on the Priority Watch List, such as China and India, or the Watch List, such as Canada and Mexico. Among the concerns reported were trade secret theft, online piracy and counterfeiting, technology transfer requirements, and inadequate intellectual property protections and
- 14 -
enforcement. The absence of harmonized intellectual property protection laws and effective enforcement makes it difficult to ensure consistent respect for patent, trade secret, and other intellectual property rights on a worldwide basis. As a result, it is possible that we will not be able to enforce our rights against third parties that misappropriate our proprietary technology in those countries.
The success of our business is highly dependent on maintenance of intellectual property rights.
The unauthorized use of our IP rights may increase the cost of protecting these rights or reduce our revenues. We seek to protect trade secrets and our other proprietary technology, in part, by requiring each of our employees to enter into non-disclosure and IP assignment agreements. In these agreements, the employee agrees to maintain the confidentiality of all of our proprietary information and, subject to certain exceptions, to assign to us all rights in any proprietary information or technology made, or contributed, by the employee during his or her employment. Generally, we do not enter into non-compete arrangements with our employees, with the exception of certain executives, senior managers and, in some cases, one or more of the principals of the businesses that we acquire.
All of these types of agreements may be breached or be found unenforceable (including in light of potential regulations proposed by the United States Federal Trade Commission), and we may not have an adequate remedy for any such breach of, or inability to enforce, these agreements. We may initiate, or be subject to, claims or litigation for infringement of proprietary rights, or to establish the validity of our proprietary rights, which could result in significant expense to us, cause product shipment delays, require us to enter royalty or licensing agreements, and divert the efforts of our technical and management personnel from productive tasks, whether or not such litigation were determined in our favor.
We may be exposed to product liability claims.
While our agreements with our customers and distributors typically contain provisions designed to limit our exposure to potential material product liability claims, including appropriate warranty, indemnification, damages waiver, and limitation of liability provisions, it is possible that such provisions may not be effective under the laws of some jurisdictions, thus exposing us to substantial liability. Moreover, defending a suit, regardless of its merits, could entail substantial expense, and require the time and attention of key management personnel. If product liability claims are brought against us, the costs associated with defending such claims may adversely affect our results of operations and future cash flows.
We must expend significant resources to obtain design wins without assurance that we will be successful.
In many cases, we must initiate communication with our customers, and convince the customer that our products and systems will offer solutions for its business that are technically superior and more cost effective compared to their existing arrangements. To do so, we must often expend significant financial and human resources to develop technologically compelling products or systems with no guarantee that they will be adopted by our customers. The non-recurring engineering (“NRE”) costs for product development in these cases could be substantial, and may adversely affect our profitability if we are unable to recover these costs.
Also, customers will often require a lengthy period of on-site testing before committing to purchase a product or system, during which period we will not receive material revenue from the customer. While a design win for our products and systems may result in a long period of recurring revenue during which we hope to recover our costs, we must often internally finance our development costs over significant time periods. If our products or systems fail to gain acceptance with our customers, we will be forced to absorb any NRE costs, which could adversely affect our business if these costs are substantial.
The long development times for certain of our products and systems may result in unpredictable fluctuations in revenue and results of operations.
Our Weighing Solutions products and Measurement Systems products often have long product development cycles, both to develop the product or system and to secure customer acceptance following what may be a lengthy on-site testing period. During product development and testing, we may incur substantial costs without corresponding revenues. If our custom product or system is ultimately accepted by the customer, we may then begin to realize substantial revenues from our development efforts.
In particular, our Measurement Systems business segment which produces highly specialized systems, can be priced for ten thousand dollars to $1 million or more per unit, so that a contract to acquire one or more units can materially contribute to our revenues during the period or periods that we are permitted to recognize the contract revenues for accounting purposes. The nature of our measurement systems business segments, and in particular, the products and systems manufactured for the steel industry, may therefore result in substantial fluctuations in our operating results, including revenues and profitability, from period to period, even though there has been no fundamental change in our business or its prospects. Further, customers may request a delay in shipping a product they have ordered due to changes in their business needs, which may delay the revenue recognition for the product until shipment occurs. This may make it difficult for investors to undertake period-to-period comparisons of our performance. Also, the fluctuating nature of key components of our revenues may limit the visibility of our
- 15 -
management regarding performance in future periods, and make it more difficult for our management to provide guidance to our investors.
We may not have adequate manufacturing capacity to satisfy future increases in demand for our products.
Our business is cyclical and in periods of a rising economy, we may experience greater than expected demand for our products. During such periods, we may have difficulty expanding our manufacturing capacity to satisfy demand. Factors which could limit such expansion include delays in procurement of manufacturing equipment, shortages of skilled personnel, and physical constraints on expansion at our facilities. If we are unable to meet our customers’ requirements and our competitors sufficiently expand production, we could lose customers and/or market share. These losses could have an adverse effect on our financial condition and results of operations. Also, capacity that we add during upturns in the business cycle may result in excess capacity during periods when demand for our products recedes, resulting in inefficient use of capital, adversely affecting our business.
The nature of the market for our products may render them particularly susceptible to downturns in the economic environment.
Our products are designed to replace and provide superior functionality over existing product infrastructure utilized by our customers. Often, it is only after introductory demonstrations by our sales and engineering teams that our customers come to appreciate the advantages of our products and systems, and the long-term benefits of their adoption. An economic downturn or extended period of economic uncertainty may make customers less receptive to adopting new technological solutions at our suggestion - even ones with demonstrated operational and financial advantages. During these periods, customers may defer, or even cancel, orders for products and systems for which they have previously contracted, or given indications of interest.
Also, because our business is concentrated largely in the industrial sector, we do not benefit from countervailing fluctuations in consumer demand. As a result, our business may be more significantly affected by the consequences of a general economic slowdown than other segments of our industry, and may also take longer to recover from the effects of a slowdown.
Our backlog is subject to customer cancellation.
Many of the orders that comprise our backlog may be canceled by our customers without penalty. Our customers, particularly for our sensors segment products, often cancel orders when business is weak and inventories are excessive, a situation that we have previously experienced during periods of economic slowdown. Therefore, we cannot be certain that the amount of our backlog accurately forecasts the level of orders that will ultimately be delivered. Our results of operations could be adversely impacted if customers cancel a material portion of orders in our backlog.
The complexity of our sophisticated measurement systems may require costly corrections if design flaws are found.
Our measurement systems combine sophisticated electronic hardware and computer software. We believe that the sophistication of our systems contributes to their competitive advantage over similar products offered by other system integrators. We go to substantial lengths to assure that our systems are free of design flaws when they are delivered to our customers for installation and testing. However, due to the systems’ complexity, design flaws may occur and require correction. If the requisite corrections are substantial, or difficult to implement due to the systems’ complexity, we may not be able to recover the costs of correction and retesting, with the result that our profit margins on these systems could be substantially reduced, or even negated by losses, and our results of operations could be materially and adversely affected.
Our results are sensitive to raw material availability, quality, and cost.
Although most materials incorporated in our products are available from a number of sources, certain materials are available only from a relatively limited number of suppliers. We generally maintain a supply of strategic raw materials for continuity and risk management. Our customers would need significant advance notification to qualify alternative materials, if we had to use them. Alternative suppliers are available worldwide for most of our raw materials, but significant time (up to 12 months) would be required to qualify new suppliers and establish efficient production scheduling.
Certain metals used in the manufacture of our products are traded on active markets, and can be subject to significant price volatility and sourcing challenges.
Our results of operations may be materially and adversely affected if we have difficulty obtaining certain raw materials, if the quality of available raw materials deteriorates, if there are significant price changes for these raw materials, or if compliance with the laws and regulations described below proves costly and time-consuming. For periods in which the prices of these raw materials are rising, we may be unable to pass on the increased cost to our customers, which would result in decreased margins for the products in which they are used. For periods in which the prices are declining, we may be required to write down our inventory carrying cost of these raw materials, since we record our inventory at the lower of cost or market. Depending on the extent of the difference between market price and our carrying cost, this write-down could have a material adverse effect on our net earnings. We also may need to record losses for adverse purchase commitments for these materials in periods of declining prices.
- 16 -
Pursuant to the SEC’s “conflict minerals” rules, reporting companies that determine that certain metals, dubbed “conflict minerals” by the SEC (which include tantalum, gold, tin, and tungsten sourced from the Democratic Republic of the Congo or adjoining countries), are necessary to the functionality or production of a product they manufacture, or contract to have manufactured, must file a specialized disclosure form with the SEC. We use raw materials that are subject to conflict minerals rules. The compliance with the SEC's related disclosure requirements may affect the sourcing and availability of minerals used in the manufacture of our products. Also, because our supply chain is complex, we may face reputational challenges with our customers and other stakeholders if we are unable to materially verify the origins of all “in scope” metals used in our products.
Our product sales may be adversely affected by changes in product classification levels under various qualification and specification standards.
Certain of our products must be qualified or approved under various military and aerospace specifications and other standards. We have qualified certain of our foil resistor products under various military specifications approved and monitored by the DLA, and under certain European military specifications, and various aerospace standards approved by NASA and the ESA. Qualification and specification levels are based in part upon product failure rate. We must continuously perform tests on our products, and for products that are qualified, the results of these tests must be reported to the qualifying organization. Certain of our force sensor products are approved by the NTEP and OIML. Our on-board weighing systems must meet approved standards to make them legal-for-trade. If a product fails to meet the requirements for the applicable classification level or other approval, the product’s classification or approval may be suspended or reduced to a lower level. During the time that the classification is suspended or reduced to a lower level, net revenues and earnings attributable to that product may be adversely affected.
Failure to maintain effective internal control over financial reporting could adversely affect our ability to meet our reporting requirements.
Effective internal control over financial reporting is necessary for us to provide reasonable assurance with respect to our financial reports, and to effectively prevent fraud. Internal control over financial reporting may not prevent or detect misstatements because of inherent limitations, including the possibility of human error, the circumvention or overriding of controls, or fraud. Therefore, even effective internal control over financial reporting can provide only reasonable assurance with respect to the preparation and fair presentation of financial statements. If we cannot provide reasonable assurance with respect to our financial reports and effectively prevent fraud, our operating results could be harmed.
We are subject to costs and liabilities related to current and future environment, health and safety laws and regulations, as well as changes in the global climate, that could adversely affect our business.
Our manufacturing operations, products and packaging are subject to environmental laws, rules, regulations and standards. These laws govern air emissions, wastewater discharges, the handling, disposal, and remediation of hazardous substances, wastes, and certain chemicals used or generated in our manufacturing processes, and workplace health and safety. Compliance with these laws, rules, regulations and standards can require significant expenditure of financial and employee resources.
In addition, changes to such laws, rules, regulations, and standards are made or proposed regularly, and some of the proposals, if adopted, might, directly or indirectly, adversely affect the operating results of one or more of our operating segments. Additionally, increased regulation of emissions linked to climate change, including greenhouse gas (carbon) emissions and other climate-related regulations, could potentially increase the cost of our operations due to increased costs of compliance, increased cost of fossil fuel-based inputs and increased cost of energy intensive raw material inputs.
Federal, state, provincial, and local laws and requirements pertaining to workplace health and safety conditions are significant factors in our business. Changes to these laws and requirements may result in additional costs and actions across the affected country or region. Various government agencies may promulgate new or modified legislation, and implement special emphasis programs and enforcement actions that could impact particular Company operations.
Federal, state, provincial, foreign, and local environmental requirements relating to air, soil, and water quality, handling, discharge, storage, and disposal of a variety of substances (including per- and polyfluoroalkyl substances, or PFAS), and climate change are also significant factors in our business, and changes to such requirements generally result in an increase to our costs of operations. Although we have never been involved in any environmental matter that has had a material adverse impact on our overall operations, there can be no assurance that in connection with any past or future operation, acquisition or otherwise, we will not be obligated to address environmental matters that could have a material adverse impact on our business, financial condition, and results of operations.
The failure by us to comply with applicable environmental, health and safety requirements could result in fines, penalties, enforcement actions, third-party claims for property damage and personal injury, requirements to clean up property or to pay for the costs of cleanup, or regulatory or judicial orders requiring corrective measures, which could have a material adverse effect
- 17 -
on our business, financial condition or results of operations. Additionally, such actions could negatively impact our reputation in the impacted geographic market and more broadly.
Our credit facilities subject us to financial and operating restrictions.
We maintain a revolving credit facility with banks that we use, or may use, for working capital, acquisition financing, and other purposes. This credit facility subjects us to certain restrictions which may affect, and in some cases significantly limit or prohibit, among other things, our ability to:
•borrow additional funds;
•pay dividends or make other distributions;
•repurchase our common stock;
•make investments, including capital expenditures;
•engage in transactions with affiliates or subsidiaries; or
•create liens on our assets.
Our credit facility requires us to maintain certain financial ratios. If we fail to comply with the covenant restrictions contained in the credit facility, that failure could result in termination of the facility, and all amounts outstanding could become immediately payable.
A significant portion of our cash and cash equivalents and short-term investments balances are held by our non-U.S. subsidiaries.
We generate a significant amount of cash and profits from our non-U.S. subsidiaries. As of December 31, 2024, 94% of our cash and cash equivalents and short-term investments were held by subsidiaries outside of the United States. Any repatriation of such funds could incur local withholding tax in the source and intervening foreign jurisdictions. These amounts could also be subject to certain U.S. state taxes.
Changes in our tax rate or exposure to additional income tax liabilities could affect our profitability. In addition, audits by tax authorities could result in additional tax payments for prior periods.
We are subject to income taxes in the U.S. and in various foreign jurisdictions. Domestic and international tax liabilities are subject to the allocation of income among various tax jurisdictions. Our effective tax rate can be affected by changes in the mix of earnings in countries with differing statutory tax rates (including as a result of business acquisitions and dispositions), changes in the valuation of deferred tax assets and liabilities, accruals related to contingent tax liabilities, the results of audits and examinations of previously filed tax returns, and changes in tax laws.
Any of these factors may adversely affect our tax rate and decrease our profitability. The amount of income taxes we pay is subject to audit by U.S. federal, state, local, and foreign tax authorities. If these tax audits result in assessments, our future results may be unfavorably impacted.
As a global business, we have a complex tax structure, and there is a risk that the tax authorities will disagree with our transfer pricing.
We are subject to complex transfer pricing regulations in the U.S. and foreign countries in which we operate. Transfer pricing regulations generally require that transactions between related companies be determined comparable to transactions on an arm’s length basis and that contemporaneous documentation be maintained to support the pricing used. Although transfer pricing standards are generally similar in many of the countries in which we operate, there is still a relatively high degree of uncertainty and inherent subjectivity in complying with these requirements. This topic has received additional scrutiny in recent years, including the Organization for Economic Co-operation and Development’s Base Erosion and Profit Shifting project. To the extent that any tax authority disagrees with our transfer pricing practices, we could incur significant costs to defend our position and could be subject to significant additional tax liabilities, interest, and penalties.
We may not be able to realize our deferred tax assets which would adversely impact tax expense in future periods.
We regularly assess the ability to realize deferred tax assets in each jurisdiction in which we operate based on a number of factors, including historic operating results, estimates of future earnings, the economic environment, the nature and character of the income, and the existence of cost effective tax planning strategies. This assessment requires significant judgment. If we determine that deferred tax assets are not “more likely than not” to be realized, we record a valuation allowance to reduce deferred tax assets to a level that is expected to be realized. If we subsequently determine that realization becomes “more likely than not”, a valuation allowance will be reversed. Any increase or decrease in our valuation allowances could have a significant impact on our financial results.
- 18 -
We use the mark Vishay under license from Vishay Intertechnology, which could result in product and market confusion.
We use the mark Vishay as part of our name and in connection with many of our products. Our use of the Vishay mark is governed by an agreement between us and Vishay Intertechnology, giving us a perpetual, royalty-free, worldwide license for the use of the mark. We believe that it is important that we continue the use of the Vishay name, to a certain extent, in order to benefit from the reputation of the Vishay brand, which was first used in connection with our foil resistors and strain gages when Vishay Intertechnology was founded over 50 years ago.
There are risks associated with our use of the Vishay mark, however, because both we, and Vishay Intertechnology, use the Vishay mark, confusion could arise in the market regarding the products offered by the two companies, and there could be a misplaced perception of our continuing to be associated with Vishay Intertechnology. Also, any negative publicity associated with one of the two companies in the future could adversely affect the public image of the other. Finally, Vishay Intertechnology will have the right to terminate the license agreement, in certain extreme circumstances, if we are in material and repeated breach of the terms of the agreement, which would likely have an adverse effect on us and our business.
Risks relating to our operations outside the United States
We attempt to improve profitability by operating in countries in which manufacturing efficiencies may be achieved, but the shift of operations to these regions may entail considerable expense.
Our strategy is aimed at achieving significant production cost savings through the transfer and expansion of manufacturing operations to and in countries in which we have existing capacity, as well as countries with lower production costs or other benefits, such as India. During this process, we may experience under-utilization of certain plants and factories in higher-cost regions, and capacity constraints in plants and factories located in lower-cost regions. Also, we may experience delays in the expected transition from a higher-cost location to a lower-cost one that results in greater than expected use of the higher-cost facility. This transitional utilization may result initially in production inefficiencies and higher costs. These costs include those associated with compensation in connection with workforce reductions and plant closings in the higher-cost regions, start-up expenses, manufacturing and construction delays, and increased depreciation costs in connection with the initiation or expansion of production in lower-cost regions. In addition, as we implement transfers of certain of our operations, we may experience strikes or other types of labor unrest as a result of layoffs or termination of our employees in higher-cost countries.
In connection with the transfer of manufacturing operations to lower-cost countries, and upgrading of existing facilities in higher-cost countries, we are also increasing the level of automation in our plants to optimize our capital and labor resources in production, inventory management, quality control, and warehousing. Although we have substantial experience with automation in several of our plants in higher-cost countries, there are risks in automating plants which previously did not use a significant amount of automation, including the possibility of inefficiencies and higher operating costs in the transition from manual to automated operations. If the transition extends longer than anticipated, we could suffer product yield inefficiencies, contributing to higher product costs and increasing the time it will take for us to achieve a return on our investment in the capital equipment involved in the automation process. Furthermore, any layoffs or termination of our employees as a result of increased automation may lead to strikes or other types of labor unrest. If we experience these types of inefficiencies, they could have an adverse effect on our operating results, customer relationships, and financial condition.
Current and future tariffs, trade regulation or other restrictions may adversely impact our business, financial condition and results of operations.
We have manufacturing operations in India, China, Europe, Canada, Israel and the United States, as well as in other countries. Significant current or future tariffs or other restrictions which are placed on Indian, Chinese, European, Canadian or Israeli imports to the United States, or any related countermeasures which are taken by the countries involved, may materially harm our revenues and results of operations.
Additional tariffs, or other changes in U.S. trade policy, could trigger retaliatory actions by affected countries. Certain foreign governments have instituted or are considering imposing trade sanctions on certain U.S. goods. We cannot predict future trade policy or the terms of any renegotiated trade agreements and their impacts on our business. The adoption and expansion of trade restrictions, the occurrence of a trade war, or other governmental actions related to tariffs, quotas, duties, taxes or trade agreements or policies has the potential to adversely impact demand for our products, our costs, our customers, and our suppliers, which in turn could adversely impact our business, financial condition and results of operations. In addition, our access to raw materials and other supplies may be adversely impacted by tariffs.
We are subject to the risks of political, economic, health, and military instability in countries outside the United States in which we operate.
Some of our products are produced in Israel, India, China, and other countries which are particularly subject to risks of political, economic, health and military instability. This instability could result in wars, riots, nationalization of industry, currency fluctuations, and labor unrest or unavailability. These conditions could have an adverse impact on our ability to manufacture, ship and operate in these regions and, depending on the extent and severity of these conditions, could result in a reduction in
- 19 -
customer orders and sales to certain regions and end-markets and materially and adversely affect our overall financial condition and operating results.
We have principal manufacturing facilities and operations located in Israel. Accordingly, our business is directly influenced by the political, economic and military conditions affecting Israel at any given time. Since the establishment of the State of Israel in 1948, a number of armed conflicts have occurred between Israel and its neighboring countries, terrorist organizations and other militant groups, including the current war between Israel and Hamas. We have never experienced any material interruption in our operations attributable to these factors, in spite of several Middle East crises, including the current war. In response to conflict in or around Israel, we could in the future temporarily discontinue production in Israel for the safety of our employees. We could also face future production slowdowns or interruptions at either of our manufacturing locations in Israel due to the impacts of conflicts, such as the war between Israel and Hamas, including personnel absences as a number of our employees have been called to active military duty, or due to other resource constraints such as the inability to source materials for production. The intensity and duration of Israel’s current war against Hamas are difficult to predict as are such war’s implications on our operations and on the global economy. A change in the security and political situation in Israel and in the economy could have a material adverse effect on our business, operating results and financial condition.
We are subject to foreign currency exchange rate risks which may impact our results of operations.
We are exposed to foreign currency exchange rate risks, particularly due to market values of transactions in currencies other than the functional currencies of certain subsidiaries.
Our significant foreign subsidiaries are located in the United Kingdom, Canada, Germany, Israel, Japan, and India. Our operations in Europe, Canada and certain locations in Asia primarily generate and expend cash in local currencies. Our operations in Israel and certain locations in Asia primarily generate cash in U.S. dollars, but these subsidiaries also have significant transactions in local currencies. Our exposure to foreign currency exchange rate risk is more pronounced in situations such as our operations in Canada, India, Israel, and China - where costs, such as production labor costs are predominantly paid in local currencies while the sales revenue for those products is predominantly denominated in U.S. dollars.
As of December 31, 2024, we did not have in place any arrangements to mitigate or hedge against exposures relating to fluctuations in foreign currency exchange rate.
A change in the mix of the currencies in which we transact our business could have a material effect on results of operations. Furthermore, the timing of cash receipts and disbursements could have a material effect on our results of operations, particularly if there are significant changes in exchange rates in a short period of time.
Our global operations are subject to extensive anti-corruption laws and other regulations.
The U.S. Foreign Corrupt Practices Act, U.K. Bribery Act and similar foreign anti-corruption laws generally prohibit companies and their intermediaries from making improper payments or providing anything of value to improperly influence foreign government officials for the purpose of obtaining or retaining business, or obtaining an unfair advantage. Recent years have seen a substantial increase in the global enforcement of anti-corruption laws. Our continued operation and expansion outside the United States, including in developing countries, could increase the risk of such violations. Despite meaningful measures that we undertake to facilitate lawful conduct, these measures may not always prevent reckless or criminal acts by our employees or agents. Any such improper actions could damage our reputation and subject us to civil or criminal investigation in the United States and in other jurisdictions, could lead to substantial civil and criminal, monetary and non-monetary penalties and could cause us to incur significant legal and investigative fees.
Our business and results of operations may be materially adversely affected by compliance with import and export laws.
We must comply with various laws and regulations relating to the import and export of products, services and technology from the U.S. and other countries having jurisdiction over our operations, which may affect our transactions with certain customers, business partners and other persons. In certain circumstances, export control and economic sanctions regulations may prohibit the export of certain products, services, and technologies and in other circumstances, we may be required to obtain an export license before exporting a controlled item. The length of time required by the licensing processes can vary, potentially delaying the shipment of products or performance of services and the recognition of the corresponding revenue. In addition, failure to comply with any of these regulations could result in substantial civil and criminal, monetary and non-monetary penalties, disruptions to our business, limitations on our ability to import and export products and services and damage to our reputation. In 2022, we determined that certain export shipments of products from one of our subsidiaries did not comply with the filing requirements of U.S. export administration and foreign trade regulations, and we voluntarily self-disclosed such non-compliance to the U.S. federal government. While non-compliance with such filing requirements could result in fines and penalties, we do not believe that the foregoing matters will have a material adverse effect on our business or results of operations, cash flows or financial condition. Moreover, any changes in export control or sanctions regulations may further restrict the export of our products or services, and the possibility of such changes requires constant monitoring to ensure we remain compliant. Any restrictions on the export of our products or product lines could have a material adverse effect on our competitive position, results of operations, cash flows or financial condition.
- 20 -
Risks Relating to Our Common Stock
The holders of Class B convertible common stock have effective voting control of our company.
We have two classes of common stock: common stock and Class B convertible common stock. The holders of common stock are entitled to one vote for each share held, while the holders of Class B convertible common stock are entitled to 10 votes for each share held. The ownership of Class B convertible common stock is highly concentrated, and holders of Class B convertible common stock effectively can cause the election of directors and the approval or disapproval of other matters requiring stockholder approval. Mrs. Ruta Zandman, the widow of the late founder of our technology, Dr. Felix Zandman, controls the voting of, solely or on a shared basis with Marc Zandman (Dr. Felix Zandman's son and a member of our Board of Directors) and Ziv Shoshani (Mrs. Ruta Zandman’s nephew and our Chief Executive Officer and a member of our Board of Directors), approximately 76.9% of our Class B convertible common stock, representing 35.0% of the total voting power of our capital stock as of December 31, 2024. Holders of our Class B convertible common stock may act in ways that are contrary to, or not in the best interests of, holders of our common stock. The voting rights of the holders of our Class B convertible common stock effectively give such holders the ability to prevent transactions that would result in a change in control of us, including transactions in which holders of our common stock might otherwise receive a premium for their shares over the then-current market price.
Certain provisions of our certificate of incorporation and bylaws may reduce the likelihood of any unsolicited acquisition proposal or potential change of control that you might consider favorable.
Our bylaws contain provisions that could be considered “anti-takeover” provisions because they make it harder for a third party to acquire us without the consent of our incumbent board of directors. Under these by-law provisions:
•stockholders may not change the size of the board of directors or, except in limited circumstances, fill vacancies on the board of directors;
•stockholders may not call special meetings of stockholders;
•stockholders must comply with advance notice provisions for nominating directors or presenting other proposals at stockholder meetings; and
•our Board of Directors, may without stockholder approval, issue preferred shares and determine their rights and terms, including voting rights, or adopt a stockholder rights plan.
These provisions could have the effect of discouraging an unsolicited acquisition proposal or delaying, deferring, or preventing a change of control transaction that might involve a premium price or otherwise be considered favorable by our stockholders.
General Risk Factors
Difficult and volatile conditions in the capital, credit and commodities markets and in the overall economy could adversely affect our financial position, results of operations and cash flows.
Our financial position, results of operations and cash flows could be adversely affected by difficult conditions and significant volatility in the capital, credit and commodities markets and in the overall worldwide economy. Recent global events have adversely affected and are continuing to adversely affect workforces, organizations, economies, and financial markets globally, leading to economic downturns, inflation, and increased market volatility. The ongoing wars between Israel and Hamas and between Russia and Ukraine, escalating tensions in the South China Sea, Red Sea and Yemen, high inflation, increasing interest rates, bank failures and associated financial instability and crises, and supply chain issues have added to global economic and market volatility. Any uncertainty about the federal budget or the debt limit in the United States could have a negative effect on the United States and global economy. The impact that these factors might have on us and our business is uncertain and cannot be estimated at this time. The difficult conditions in these markets and the overall economy affect our business in a number of ways. For example:
•Although we believe we have sufficient liquidity to run our business, under extreme market conditions, there can be no assurance that financing, if needed, would be available or sufficient, and, in such a case, we may not be able to successfully obtain financing on favorable terms, or at all.
•Continuing market volatility can exert downward pressure on our stock price, which could make it more difficult or unfavorable for us to raise additional capital in the future.
•Economic conditions could result in customers in our markets experiencing financial difficulties, including limited liquidity and their inability to obtain financing or electing to limit spending because of the economy which may result, for example, in customers’ inability to pay us at all or on a timely basis.
- 21 -
We might require additional capital to support business growth and this capital might not be available.
We intend to continue to make investments to support our business growth and may require additional funds to respond to business challenges or opportunities, including the need to develop new offerings or enhance our existing offerings, enhance our operating infrastructure, or acquire complementary businesses and technologies. Accordingly, we may need to engage in equity or debt financings to secure additional funds. If we raise additional funds through further issuances of equity or convertible debt securities, our existing stockholders could suffer significant dilution, and any new equity securities we issue could have rights, preferences, and privileges superior to those of holders of our common stock. Any debt financing secured by us in the future could involve additional restrictive covenants relating to our capital raising activities and other financial and operational matters, which may make it more difficult for us to obtain additional capital and to pursue business opportunities, including potential acquisitions.
In addition, obtaining financing may be adversely affected by rising interest rates or other factors. We may not be able to obtain additional financing on terms favorable to us, if at all. If we are unable to obtain adequate financing or financing on terms satisfactory to us, when we require it, our ability to continue to support our business growth and to respond to business challenges could be significantly limited.
Our future success is substantially dependent on our ability to attract and retain highly qualified technical, managerial, marketing, finance, and administrative personnel.
The competitive environment of our business requires us to attract and retain highly qualified personnel to develop technological innovations and bring them to market on a timely basis. Our complex operations also require us to attract and retain highly qualified administrative personnel in functions such as legal, tax, accounting, business development, financial reporting, and treasury. The market for personnel with such qualifications is highly competitive. We have not entered into employment or non-competition agreements with many of our key personnel.
The loss of the services of, or the failure to effectively recruit, qualified personnel, including for key executive positions, could have a material adverse effect on our business.
We are exposed to, and may be adversely affected by, interruptions to our computer and information technology systems and sophisticated cyber-attacks.
We rely on our information technology systems and networks in connection with many of our business activities. Some of these networks and systems are managed by third party service providers and are not under our direct control. Our operations routinely involve receiving, storing, processing, and transmitting sensitive information pertaining to our business, customers, suppliers, employees, and other sensitive matters. Any cyber incidents could materially disrupt operational systems; result in loss of trade secrets or other proprietary or competitively sensitive information; compromise personally identifiable information regarding customers, employees or other persons; and jeopardize the security of our facilities. Because techniques used to obtain unauthorized access, or to sabotage systems, change frequently and generally are not recognized until they are launched against a target, we may be unable to anticipate these techniques, or to implement adequate preventative measures. Information technology security threats, including security breaches, computer malware, and other cyber-attacks are increasing in both frequency and sophistication, including as a result of ongoing military conflicts, certain U.S. foreign relations, and increased remote work arrangements, and could create financial liability, subject us to legal or regulatory sanctions, or damage our reputation with customers, suppliers, and other stakeholders. We continuously seek to maintain a robust program of information security and controls, but the impact of a material information technology event could have a material adverse effect on our competitive position, reputation, results of operations, financial condition, and cash flows.
In addition to experiencing a security incident, third parties may gather, collect, or infer sensitive information about us from public sources, data brokers, or other means that reveals competitively sensitive details about our organization and could be used to undermine our competitive advantage or market position. Moreover, our proprietary, confidential, and/or sensitive information could be leaked, disclosed, or revealed as a result of or in connection with the use of generative artificial intelligence technologies.
Even if we are not targeted directly, cyberattacks on the U.S. government, financial markets, financial institutions, or other businesses, including our vendors, software creators, cloud providers, cybersecurity service providers, and other third parties with whom we work, may occur, and such events could disrupt our normal business operations and networks in the future.
Interruptions in our information technology systems could adversely affect our business.
We rely on the efficient and uninterrupted operation of complex information technology systems and networks to operate our business. Any significant system or network disruption, including, but not limited to, new system implementations, computer viruses, security breaches, facility issues or energy blackouts could have a material adverse impact on our operations and results of operations. Such network disruption could result in a loss of the confidentiality of our intellectual property or the release of sensitive competitive information or customer or employee personal data. Any loss of such information could harm our
- 22 -
competitive position, result in a loss of customer confidence, and cause us to incur significant costs to remedy the damages caused by the disruptions or security breaches. We have implemented protective measures to prevent against and limit the effects of system or network disruptions, but there can be no assurance that such measures will be sufficient to prevent or limit the damage from any future disruptions and any such disruption could have a material adverse impact on our business and results of operations.
Third-party service providers, such as subcontractors, distributors and vendors have access to certain portions of our sensitive data. In the event that these service providers do not properly safeguard our data that they hold, security breaches and loss of our data could result. Any such loss of data by our third-party service providers could have a material adverse impact on our business and results of operations.
We may use artificial intelligence in our business, and challenges with properly managing its use could adversely affect our business.
We may incorporate artificial intelligence (“AI”) solutions into our business, processes, or products, and applications of AI may become important in our operations over time. Our competitors or other third parties may incorporate AI into their businesses more quickly or more successfully than us, which could impair our ability to compete effectively and adversely affect our results of operations. Additionally, if the types of information that AI applications assist in producing are or are alleged to be deficient, inaccurate, or biased, our business, financial condition, and results of operations may be adversely affected. The rapid evolution of AI, including potential government regulation of AI, may require significant resources to develop, test and maintain our implementations of AI.
Unexpected events, such as a natural disaster, could disrupt our operations and adversely affect our results of operations.
We have manufacturing and other facilities in countries around the world. Unexpected events, including fires or explosions at facilities; natural disasters, such as flooding, hurricanes, and earthquakes; pandemics; outbreaks of disease or illness; war or terrorist activities; civil unrest; unplanned outages; supply or labor disruptions; and failures of equipment or systems at any of our facilities could adversely affect our results of operation. If adverse conditions were to arise with respect to any of our facilities as a result of a natural disaster or other unexpected event, they may result in customer disruption, physical damage to one or more key operating facilities, the temporary closure of one or more key operating facilities, the temporary disruptions of information systems, and/or an adverse effect on our results of operations.
Our stock price could become more volatile and investments could lose value.
The market price of our common stock, and the number of shares traded each day, has experienced significant fluctuations and may continue to fluctuate significantly. The market price for our common stock may be affected by a number of factors, including, but not limited to:
•shortfalls in our expected net revenue, earnings or key performance metrics;
•changes in recommendations or estimates by securities analysts;
•the announcement of new products by us or our competitors;
•quarterly variations in our or our competitors’ results of operations;
•a change in our dividend or stock repurchase activities;
•developments in our industry or changes in the market for technology stocks;
•changes in rules or regulations applicable to our business; and
•other factors, including economic instability, inflation, labor shortages, supply chain disruptions and changes in political or market conditions.
A significant drop in our stock price could expose us to costly and time consuming litigation, which could result in substantial costs, and divert management’s attention and resources, resulting in an adverse effect on our business.
Also, given our market capitalization and trading volume fluctuations, it is possible that there will be less market and institutional interest in our shares, and that we will not attract substantial coverage in the analyst community. As a result, the trading market for our shares may be less liquid, making it more difficult for investors to dispose of their shares at favorable prices, and investors may have less independent information and analysis available to them concerning our company.
Your percentage ownership of our common stock may be diluted in the future.
Your percentage ownership of our common stock may be diluted in the future because of equity awards that we expect will be granted to our directors, officers, and employees. The Vishay Precision Group, Inc. 2022 Stock Incentive Program, as may be amended from time to time, provides for the grant of equity-based awards, including restricted stock, restricted stock units, stock options, and other equity-based awards to our directors, officers, and other employees, advisors and consultants.
- 23 -
Item 1B. UNRESOLVED STAFF COMMENTS
None.
Item 1C. CYBERSECURITY
The Company’s Board of Directors (the “Board”) recognizes the critical importance of maintaining the trust and confidence of our customers, clients, suppliers, business partners, employees and investors with respect to cybersecurity matters. The Board is actively involved in oversight of the Company’s risk management program, and cybersecurity represents an important component of the Company’s overall approach to enterprise risk management (“ERM”). The Company’s cybersecurity policies, standards, processes and practices are fully integrated into the Company’s ERM program and are based on recognized frameworks established by the National Institute of Standards and Technology. In general, the Company seeks to address cybersecurity risks through a comprehensive, cross-functional approach that is focused on preserving the confidentiality, security and availability of the information that the Company collects and stores by identifying, preventing, assessing, managing and mitigating cybersecurity threats and effectively responding to cybersecurity incidents when they occur.
Risk Management and Strategy
As one of the critical elements of the Company’s overall ERM approach, the Company’s cybersecurity program is focused on the following key areas:
•Governance: As discussed in more detail under the heading “Corporate Governance and Oversight,” the Board’s oversight of cybersecurity risk management is supported by the Audit Committee of the Board (the “Audit Committee”), which regularly interacts with and receives reports from the Company’s ERM function, the Vice President of IT and Digital, the Company’s Chief Information Security Officer (“CISO”), and other members of management.
•Collaborative Approach: The Company has integrated cybersecurity risk management into its broader risk management framework to promote a Company-wide culture of cybersecurity risk management. To that end, the Company has implemented a comprehensive, cross-functional approach to identifying, preventing and mitigating cybersecurity threats and incidents, while also implementing controls and procedures that provide for the prompt escalation of certain cybersecurity incidents so that decisions regarding the public disclosure and reporting of such incidents can be made by management in a timely manner.
•Technical Safeguards: The Company deploys technical safeguards that are designed to protect the Company’s information systems from cybersecurity threats, including firewalls, intrusion prevention and detection systems, anti-malware functionality and access controls, which are evaluated and improved through vulnerability assessments and cybersecurity threat intelligence.
•Incident Response: The Company has established and maintains a comprehensive incident response plan that fully address the Company’s response to a cybersecurity incident, and this plan is tested and evaluated on a regular basis.
•Third-Party Risk Management : The Company maintains a comprehensive, risk-based approach to identifying and overseeing cybersecurity risks presented by third parties, including vendors, service providers and other external users of the Company’s systems, as well as the systems of third parties that could adversely impact our business in the event of a cybersecurity incident affecting those third-party systems. The Company conducts security assessments of all of its electronic information-related third-party service providers before the Company engages them, and the Company maintains policies and procedures to oversee and identify cybersecurity risks associated with its use of third-party service providers.
•Education and Awareness: The Company provides regular, mandatory training for the Company's personnel regarding cybersecurity threats as a means to equip them with effective tools to address cybersecurity threats, and to communicate the Company’s evolving information security policies, standards, processes and practices.
The Company engages in the periodic assessment and testing of the Company’s policies, standards, processes and practices that are designed to address cybersecurity threats and incidents. These efforts include a wide range of activities, including audits, assessments, threat modeling, penetration and vulnerability testing and other exercises focused on evaluating the effectiveness of our cybersecurity measures and planning. The Company regularly engages third parties, including consultants and outside monitoring agencies, to perform assessments on our cybersecurity measures, including information security maturity assessments, audits and independent reviews of our information security control environment and operating effectiveness. The results of such assessments, audits and reviews are reported to the Audit Committee during management’s annual update to the Audit Committee and the Board, and the Company updates and adjusts its cybersecurity policies, standards, processes and practices as necessary based on the information provided by these assessments, audits and reviews.
- 24 -
Management’s Role in Managing Risk
The Vice President of IT and Digital, along with the CISO, have developed a strategy and multi-year plan for cybersecurity and regularly update it based on evolving technology trends. The Audit Committee reviews the Company’s information security program, including cybersecurity controls, annually (and/or if and when a significant event occurs as defined by its Incident Management policy). The Audit Committee updates the Board annually and upon request of the Board as detailed under the Corporate Governance and Oversight Section .
Our Vice President of IT and Digital, holds a Bachelor of Science in Computer Science and brings a wealth of experience from managing IT organizations in large, publicly traded companies, in addition to a distinguished background of service in the Israeli army, where she was responsible for managing classified information. Our CISO has an impressive 20-plus years in the field of cybersecurity, underpinned by a Bachelor's degree specializing in Knowledge and Information Management. Our CISO's extensive experience includes a period of 12 years during which he was employed by the Government of Israel, where he managed classified information systems and teams, a role that demands the highest levels of diligence and expertise in information security.
Through third-party service providers and attendance at seminars, the Vice President of IT and Digital and CISO are regularly informed about the latest developments in cybersecurity, including potential threats and innovative risk management techniques. This ongoing knowledge acquisition enhances our processes to identify, prevent, mitigate and remediate of cybersecurity threats and cybersecurity incidents.
Together, our Vice President of IT and Digital and CISO lead a dynamic, cross-functional team that includes relevant stakeholders from all Company divisions. This team plays a pivotal role in raising cybersecurity awareness throughout the Company, ensuring that every employee is informed and cautious about potential cyber threats. They are committed to keeping our Company's management and Board regularly informed on cybersecurity matters, ensuring transparency and proactive management of digital risks. Additionally, they actively collaborate with division managers, participating in divisional management meetings to identify and protect sensitive information. Their involvement at this level ensures that cybersecurity is integrated into every aspect of our operations, aligning with our broader strategic objectives.
Corporate Governance and Oversight
The Audit Committee is central to the Board’s oversight of cybersecurity risks and bears the primary responsibility for this domain. The Audit Committee is composed of directors who have diverse qualifications and experiences.
Significant cybersecurity matters, and strategic risk management decisions are escalated to the Audit Committee and, as appropriate, the Board, ensuring that such bodies maintain comprehensive oversight and can provide guidance on critical cybersecurity issues.
Item 2. PROPERTIES
As of December 31, 2024, our major facilities consisted of:
| Approx. Available Space (square feet) | United States | Other Countries | Total | ||||||||
| Owned facilities | 226,000 | 471,150 | 697,150 | ||||||||
| Leased facilities | 73,000 | 287,792 | 360,792 | ||||||||
| Total facilities | 299,000 | 758,942 | 1,057,942 | ||||||||
Our leased facility in Modi'in Israel represents approximately 42% of the total leased square footage in Other Countries.
Our corporate headquarters are located at 3 Great Valley Parkway, Suite 150, Malvern, PA 19355.
- 25 -
In the opinion of management, our properties and equipment generally are in good operating condition and are adequate for our present needs. We do not anticipate difficulty in renewing leases as they expire, or in finding alternative facilities.
Item 3. LEGAL PROCEEDINGS
The Company is subject to various legal proceedings that constitute ordinary, routine litigation incidental to its business. The Company believes that the foregoing matters will not have a material adverse effect on the Company’s business or its financial condition, results of operations, or cash flows.
Item 4. MINE SAFETY DISCLOSURES
Not applicable.
- 26 -
PART II
Item 5. MARKET FOR REGISTRANT’S COMMON EQUITY, RELATED STOCKHOLDER MATTERS, AND ISSUER PURCHASES OF EQUITY SECURITIES
Our common stock is listed on the New York Stock Exchange under the symbol VPG. The Board of Directors may only declare dividends or other distributions with respect to the common stock or the Class B convertible common stock if it grants such dividends or distributions in the same amount, per share, with respect to the other class of stock. Stock dividends or distributions, on any class of stock, are payable only in shares of stock of that class. Shares of either common stock or Class B convertible common stock cannot be split, divided, or combined unless the other is also split, divided, or combined equally. Holders of record of our common stock totaled approximately 676 at February 25, 2025.
We have two classes of common stock: common stock and Class B convertible common stock. The holders of common stock are entitled to one vote for each share held, while the holders of Class B convertible common stock are entitled to 10 votes for each share held. At February 25, 2025, we had outstanding 1,022,887 shares of Class B convertible common stock, par value $0.10 per share. Currently, the holders of VPG’s Class B convertible common stock hold approximately 45.5% of the voting power of our Company. Mrs. Ruta Zandman, the widow of the late founder of our technology, Dr. Felix Zandman, controls the voting of, solely or on a shared basis with Marc Zandman (Dr. Felix Zandman's son and a member of our Board of Directors) and Ziv Shoshani (Mrs. Ruta Zandman's nephew, our Chief Executive Officer and a member of our Board of Directors), approximately 76.9% of our Class B convertible common stock, representing 35.0% of the total voting power of our capital stock as of December 31, 2024.
The following table provides information about repurchases of the Company's common stock during the twelve-month period ended December 31, 2024.
| Total Number of Shares Purchased | Average Price Paid Per Share | Total Number of Shares Purchased as Part of Publicly Announced Plans or Programs | Maximum Number of Shares that May Yet Be Purchased Under the Plans (a) | ||||||||||||||||||||
| January 1, 2024 to March 30, 2024 | 84,765 | $ | 32.50 | 84,765 | 241,609 | ||||||||||||||||||
| March 31, 2024 - June 29, 2024 | 96,710 | $ | 32.39 | 96,710 | 144,899 | ||||||||||||||||||
| June 30, 2024 - September 28, 2024 | 63,227 | $ | 30.50 | 63,227 | — | ||||||||||||||||||
| September 29, 2024 - December 31, 2024 | — | $ | — | — | — | ||||||||||||||||||
| Total | 244,702 | 244,702 | |||||||||||||||||||||
(a) On August 8, 2022, the Board of Directors (the “Board”) of the Company authorized the repurchase of up to 600,000 shares of the Company’s outstanding common stock (the “Stock Repurchase Plan”). The Stock Repurchase Plan was originally set to expire on August 11, 2023, and the Board authorized purchases thereunder to be made through an issuer repurchase plan adopted under Rule 10b5-1 of the Securities Exchange Act of 1934, as amended (the “Exchange Act”), open market purchases or private transactions, in accordance with the applicable federal securities laws, including Rule 10b-18 under the Exchange Act. On August 8, 2023, the Company announced that its Board of Directors extended the term of the previously approved stock repurchase plan to August 9, 2024. The Stock Repurchase Plan expired in accordance with its terms on August 9, 2024. From August 8, 2022 to August 9, 2024, the Company had repurchased an aggregate of 518,328 shares under the Stock Repurchase. | |||||||||||||||||||||||
- 27 -
Stock Performance Graph
The graph and table below compare the cumulative total stockholder return on the Company’s common stock over a five year period, with the returns on the Russell 2000 Stock Index, and a peer group of companies selected by our management. The peer group is made up of eight publicly held manufacturers of sensors, sensor-based equipment, and sensor-based systems. Management believes that the product offerings of the peer group companies are more similar to our product offerings than those of the companies contained in any published industry index. The return of each new peer issuer has been weighted according to the respective issuer’s stock market capitalization. The graph and table assume that $100 had been invested at December 31, 2019, and that all dividends were reinvested. The graph and table are not necessarily indicative of future investment performance.
| 12/31/19 | 12/31/20 | 12/31/21 | 12/31/22 | 12/31/23 | 12/31/24 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Vishay Precision Group, Inc. | Cumulative $ | 100.00 | 92.59 | 109.18 | 113.66 | 100.18 | 69.00 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Russell 2000 Index | Cumulative $ | 100.00 | 119.96 | 137.74 | 109.58 | 128.14 | 142.92 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Peer Group | Cumulative $ | 100.00 | 106.68 | 119.69 | 95.30 | 118.23 | 105.02 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||
*The management selected peer group includes: CTS Corp., Luna Innovations Inc., inTEST Corporation, Kyowa, Spectris plc, TT Electronics plc, FARO Technologies Inc., ESCO Technologies Inc.
Item 6. [Reserved]
- 28 -
Item 7. MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS
Overview
VPG is a global leader in precision measurement and sensing technologies that help power the future by bridging the physical world with the digital one. Many of our specialized sensors, weighing solutions, and measurement systems are “designed-in” by our customers, and address growing applications across a diverse array of industries and markets. Our products are marketed under brand names that we believe are characterized as having a very high level of precision and quality, and we employ an operationally diversified structure to manage our businesses.
Driven by the continued proliferation of data generated by the expanding use of sensors across a widening array of industrial and technology-driven applications, precision measurement and sensing technologies help ensure and deliver required levels of quality of mission-critical or high-value data. VPG’s products are often at the first stage of a data value chain (i.e., the process of converting the physical world into a digital format that can be used for a specific purpose) and as such impact the effectiveness of vast number of critical, high-value downstream processes. Over the past few years, we have seen a broadening of precision sensing applications in both our traditional industrial markets and new markets, due to the development of higher functionality in our customers' end products. Our precision measurement solutions are used across a wide variety of end markets upon which we focus, including test and measurement, industrial, transportation, steel, avionics, military and space, as well as other markets such as agriculture, consumer, and medical. The Company has a long heritage of innovation in sensor technologies that provide accuracy, reliability and repeatability that make our customers' products safer, smarter, and more productive. As the functionality of customers' products continues to increase, and they integrate more precision measurement sensors and related systems into their solutions, we believe this will offer substantial growth opportunities for our products and expertise.
The impact of the recent Israel-Hamas war
In October 2023, Hamas terrorists infiltrated Israel’s southern border from the Gaza Strip and conducted a series of attacks on civilian and military targets. resulting in extensive casualties and military engagement. In addition, Hezbollah, another terrorist organization based in Lebanon began attacking Israel. While Israel has entered into ceasefire agreements with Hamas and Hezbollah, the threat of new attacks remains, including from additional extremist groups.
As of February 25, 2025 (the date of this filing), our operations in Israel have operated at normal levels. The extent and duration of the current war, as well as the possibility of further spread of the conflict to other countries in the region as well as involving other political and military entities in the Middle East, poses risks to our operations and may lead to disruptions which could adversely affect our business, prospects, financial condition and results of operations.
While sales to customers in Israel account for a relatively small portion of our revenues, our operations in Israel include executive offices, which are the workplace for key executives including our chief executive officer, as well as two manufacturing facilities located in the central part of Israel which manufacture products representing approximately 26 percent of our total worldwide revenues. As of February 25, 2025, these facilities remain open and operational. We have implemented a contingency plan that we believe will secure supply of materials and logistics, build safety stock of finished goods and transfer these goods to our distribution centers outside of Israel, and we continue to take measures with regards to the safety of our employees. We may, however, determine to temporarily discontinue production in Israel for the safety of our employees. We could also face future production slowdowns or interruptions at either manufacturing location in Israel due to the impacts of the war, including personnel absences as a number of our employees have been called to active military duty, or due to other resource constraints such as the inability to source materials for production.
Overview of Financial Results
VPG reports in three product segments: Sensors segment, Weighing Solutions segment, and Measurement Systems segment. The Sensors reporting segment is comprised of the foil resistor and strain gage operating segments. The Weighing Solutions segment is comprised of specialized modules and systems used to precisely measure weight, force torque, and pressure. The Measurement Systems reporting segment is comprised of highly specialized systems for steel production, materials development, and safety testing.
Net revenues for the year ended December 31, 2024 were $306.5 million compared to net revenues of $355.0 million for the year ended December 31, 2023. Net earnings attributable to VPG stockholders for the year ended December 31, 2024 were $9.9 million, or $0.74 per diluted share, compared to $25.7 million, or $1.88 per diluted share, for the year ended December 31, 2023.
The results of operations for the years ended December 31, 2024 and 2023 include items affecting comparability as listed in the reconciliations below. The reconciliations below include certain financial measures which are not recognized in accordance
- 29 -
with U.S. generally accepted accounting principles ("GAAP"), including adjusted gross profits, adjusted gross profit margin, adjusted operating income, adjusted operating margin, adjusted net earnings, adjusted net earnings per diluted share, EBITDA, and adjusted EBITDA. These non-GAAP measures should not be viewed as an alternative to GAAP measures of performance. Non-GAAP measures such as adjusted gross profits, adjusted gross profit margin, adjusted operating income, adjusted operating margin, adjusted net earnings, adjusted net earnings per diluted share, EBITDA, and adjusted EBITDA do not have uniform definitions. These measures, as calculated by VPG, may not be comparable to similarly titled measures used by other companies. Management believes that these non-GAAP measures are useful to investors because each presents what management views as our core operating results for the relevant period. The adjustments to the applicable GAAP measures relate to occurrences or events that are outside of our core operations, and management believes that the use of these non-GAAP measures provides a consistent basis to evaluate our operating profitability and performance trends across comparable periods. In addition, the Company has historically provided these or similar non-GAAP measures and understands that some investors and financial analysts find this information helpful in analyzing the Company’s performance and in comparing the Company’s financial performance to that of its peer companies and competitors. Management believes that the Company’s non-GAAP measures are regarded as supplemental to its GAAP financial results.
The items affecting comparability are (dollars in thousands, except per share amounts):
| Gross Profit | Operating Income | Net Earnings Attributable to VPG Stockholders | Diluted Earnings Per share | |||||||||||||||||||||||||||||||||||||||||||||||
| Fiscal Year Ended December 31, | 2024 | 2023 | 2024 | 2023 | 2024 | 2023 | 2024 | 2023 | ||||||||||||||||||||||||||||||||||||||||||
| As reported - GAAP | 125,532 | 150,342 | 16,864 | 41,954 | $ | 9,911 | $ | 25,707 | $ | 0.74 | $ | 1.88 | ||||||||||||||||||||||||||||||||||||||
| As reported - GAAP Margins | 41.0 | % | 42.3 | % | 5.5 | % | 11.8 | % | — | — | — | — | ||||||||||||||||||||||||||||||||||||||
Acquisition purchase accounting adjustments (a) | 79 | 335 | 79 | 335 | 79 | 335 | 0.01 | 0.02 | ||||||||||||||||||||||||||||||||||||||||||
Acquisition costs (b) | — | — | 101 | — | 101 | — | 0.01 | — | ||||||||||||||||||||||||||||||||||||||||||
| Restructuring costs | — | — | 1,062 | 1,560 | 1,062 | 1,560 | 0.08 | 0.11 | ||||||||||||||||||||||||||||||||||||||||||
Foreign exchange (gain)/loss (c) | — | — | — | — | (1,879) | 822 | (0.14) | 0.06 | ||||||||||||||||||||||||||||||||||||||||||
| Less: Tax effect of reconciling items and discrete tax items | — | — | — | — | (3,079) | (1,245) | (0.24) | (0.10) | ||||||||||||||||||||||||||||||||||||||||||
| As Adjusted - Non GAAP | $ | 125,611 | $ | 150,677 | $ | 18,453 | $ | 43,849 | $ | 12,700 | $ | 29,669 | $ | 0.95 | $ | 2.17 | ||||||||||||||||||||||||||||||||||
| As Adjusted - Non GAAP Margins | 41.0 | % | 42.4 | % | 6.0 | % | 12.4 | % | ||||||||||||||||||||||||||||||||||||||||||
| Year ended | ||||||||||||||
| December 31, 2024 | December 31, 2023 | |||||||||||||
| Net earnings attributable to VPG stockholders | $ | 9,911 | $ | 25,707 | ||||||||||
| Interest Expense | 2,512 | 3,974 | ||||||||||||
| Income tax expense | 7,730 | 12,426 | ||||||||||||
| Depreciation | 12,022 | 11,798 | ||||||||||||
| Amortization | 3,783 | 3,752 | ||||||||||||
| EBITDA | $ | 35,958 | $ | 57,657 | ||||||||||
| EBITDA MARGIN | 11.7 | % | 16.2 | % | ||||||||||
| Acquisition purchase accounting adjustments (a) | 79 | 335 | ||||||||||||
| Acquisition costs (b) | 101 | — | ||||||||||||
| Restructuring costs | 1,062 | 1,560 | ||||||||||||
| Severance cost | 347 | — | ||||||||||||
| Foreign exchange (gain) loss (c) | (1,879) | 822 | ||||||||||||
| ADJUSTED EBITDA | 35,668 | 60,374 | ||||||||||||
| ADJUSTED EBITDA MARGIN | 11.6 | % | 17.0 | % | ||||||||||
(a) Acquisition purchase accounting adjustments include fair market value adjustments associated with inventory recorded as a component of costs of products sold.
(b) Acquisition costs associated with the acquisition of Nokra in September 2024
(c) Impact of foreign currency exchange rates on assets and liabilities.
- 30 -
Financial Metrics
We utilize several financial measures and metrics to evaluate the performance and assess the future direction of our business. These key financial measures and metrics include net revenues, gross profit margin, end-of-period backlog, book-to-bill ratio, and inventory turnover.
Gross profit margin is gross profit shown as a percentage of net revenues. Gross profit is generally net revenues less costs of products sold, but could also include certain other period costs. Gross profit margin is clearly a function of net revenues, but also reflects our cost-cutting programs and our ability to contain fixed costs.
End-of-period backlog is one indicator of potential future sales. We include in our backlog only open orders that have been released by the customer for shipment in the next twelve months. If demand falls below customers’ forecasts, or if customers do not control their inventory effectively, they may cancel or reschedule the shipments that are included in our backlog, in many instances without the payment of any penalty. Therefore, the backlog is not necessarily indicative of the results to be expected for future periods.
Another important indicator of demand in our industry is the book-to-bill ratio, which is the ratio of the amount of product ordered during a period compared with the product that we ship during that period. A book-to-bill ratio that is greater than one indicates that demand is higher than current revenues and manufacturing capacities, and it indicates that we may generate increasing revenues in future periods. Conversely, a book-to-bill ratio that is less than one is an indicator of lower demand compared to existing revenues and current capacities and may foretell declining sales.
We focus on our inventory turnover as a measure of how well we are managing our inventory. We define inventory turnover for a financial reporting period as our costs of products sold for the four fiscal quarters ending on the last day of the reporting period divided by our average inventory (computed using each quarter-end balance) for this same period. A higher level of inventory turnover reflects more efficient use of our capital.
The quarter-to-quarter trends in these financial metrics can also be an important indicator of the likely direction of our business. The following table shows net revenues, gross profit margin, the end-of-period backlog, the book-to-bill ratio, and the inventory turnover for our business as a whole during the five quarters beginning with the fourth quarter of 2023 and through the fourth quarter of 2024 (dollars in thousands):
| 4th Quarter | 1st Quarter | 2nd Quarter | 3rd Quarter | 4th Quarter | |||||||||||||||||||||||||
| 2023 | 2024 | 2024 | 2024 | 2024 | |||||||||||||||||||||||||
| Net revenues | $ | 89,528 | $ | 80,783 | $ | 77,359 | $ | 75,727 | $ | 72,653 | |||||||||||||||||||
| Gross profit margin | 43.0 | % | 43.4 | % | 41.9 | % | 40.0 | % | 38.2 | % | |||||||||||||||||||
| End-of-period backlog | $ | 117,300 | $ | 109,603 | $ | 104,858 | $ | 100,191 | $ | 96,189 | |||||||||||||||||||
| Book-to-bill ratio | 0.84 | 0.93 | 0.95 | 0.91 | 1.00 | ||||||||||||||||||||||||
| Inventory turnover | 2.27 | 2.05 | 1.99 | 2.01 | 2.06 | ||||||||||||||||||||||||
- 31 -
| 4th Quarter | 1st Quarter | 2nd Quarter | 3rd Quarter | 4th Quarter | |||||||||||||||||||||||||
| 2023 | 2024 | 2024 | 2024 | 2024 | |||||||||||||||||||||||||
| Sensors | |||||||||||||||||||||||||||||
| Net revenues | $ | 34,259 | $ | 29,414 | $ | 28,869 | $ | 28,201 | $ | 25,755 | |||||||||||||||||||
| Gross profit margin | 40.2 | % | 36.5 | % | 38.3 | % | 31.0 | % | 32.0 | % | |||||||||||||||||||
| End-of-period backlog | $ | 49,000 | $ | 45,024 | $ | 41,627 | $ | 39,995 | $ | 39,605 | |||||||||||||||||||
| Book-to-bill ratio | 0.85 | 0.91 | 0.90 | 0.89 | 1.04 | ||||||||||||||||||||||||
| Inventory turnover | 2.36 | 2.09 | 2.02 | 2.28 | 2.15 | ||||||||||||||||||||||||
| Weighing Solutions | |||||||||||||||||||||||||||||
| Net revenues | $ | 30,438 | $ | 28,845 | $ | 27,447 | $ | 25,174 | $ | 25,739 | |||||||||||||||||||
| Gross profit margin | 35.6 | % | 39.1 | % | 37.6 | % | 35.1 | % | 34.1 | % | |||||||||||||||||||
| End-of-period backlog | $ | 28,800 | $ | 27,109 | $ | 25,077 | $ | 25,590 | $ | 28,003 | |||||||||||||||||||
| Book-to-bill ratio | 0.91 | 0.95 | 0.93 | 1.00 | 1.12 | ||||||||||||||||||||||||
| Inventory turnover | 2.46 | 2.31 | 2.20 | 2.10 | 2.35 | ||||||||||||||||||||||||
| Measurement Systems | |||||||||||||||||||||||||||||
| Net revenues | $ | 24,831 | $ | 22,524 | $ | 21,043 | $ | 22,352 | $ | 21,160 | |||||||||||||||||||
| Gross profit margin | 56.0 | % | 58.1 | % | 52.4 | % | 56.8 | % | 50.9 | % | |||||||||||||||||||
| End-of-period backlog | $ | 39,500 | $ | 37,470 | $ | 38,154 | $ | 34,605 | $ | 28,581 | |||||||||||||||||||
| Book-to-bill ratio | 0.73 | 0.94 | 1.04 | 0.82 | 0.78 | ||||||||||||||||||||||||
| Inventory turnover | 1.87 | 1.62 | 1.65 | 1.55 | 1.62 | ||||||||||||||||||||||||
Net revenues of $72.7 million for the fourth quarter of 2024 decreased 4.1% from the net revenues of $75.7 million reported in the third quarter of 2024, and decreased 18.8% from $89.5 million for the comparable prior year period.
Net revenues in the Sensors segment of $25.8 million in the fourth quarter of 2024 decreased 8.7% from $28.2 million in the third quarter of 2024, and decreased 24.8% from $34.3 million in the fourth quarter of 2023. Sequentially, the decline in revenues primarily reflected lower sales of advanced sensors in our Other markets for consumer applications and lower precision resistor sales in the Test and Measurement market. The year-over-year decrease in revenues was primarily attributable to lower sales of precision resistors in the Test & Measurement market and lower sales of advanced sensors in our Other markets for consumer applications.
Net revenues in the Weighing Solutions segment of $25.7 million in the fourth quarter of 2024 increased 2.2% compared to revenues of $25.2 million in the third quarter of 2024. The sequential increase in revenues reflected higher revenue in our Industrial Weighing market and in our Other markets, which offset lower revenue in the Transportation market. Net revenues in the fourth quarter of 2024 decreased 15.4% compared to $30.4 million in the fourth quarter of 2023 mainly due to lower revenues in our Other markets from OEM customers for precision agriculture and construction applications and lower revenues in the Transportation and General Industrial markets.
Net revenues in the Measurement Systems segment of $21.2 million in the fourth quarter of 2024 decreased 5.3% from $22.4 million in the third quarter of 2024 and decreased 14.8% from $24.8 million in the fourth quarter of 2023. The sequential decline in revenue was primarily attributable to lower sales of DSI products, which was partially offset by the added revenues related to the acquisition of Nokra on September 30, 2024. The year-over-year decline in revenues was primarily attributable to lower sales of DTS products, which offset the added revenue related to the acquisition of Nokra on September 30, 2024.
The gross profit margin for the fourth quarter of 2024 decreased 1.8% compared to the third quarter of 2024, and decreased 4.8% from the fourth quarter of 2023.
Sequentially, gross profit margins improved in the Sensors segment, decreased in the Weighing Solutions segment, and decreased in the Measurement Systems segments. Sequentially, the increase in gross profit margin in the Sensors segment was primarily due to improved manufacturing efficiencies, which offset the impact of lower volume. The decrease in gross margin for the Weighing Solutions segment was primarily due to higher material costs and the reduction in inventory which offset higher volume. In the Measurement Systems segment, the lower adjusted gross profit margin in the fourth quarter of 2024 reflected lower volume and unfavorable product mix.
- 32 -
Compared to the fourth quarter of 2023, gross profit margins decreased in all of the reporting segments. In the Sensors segment, the decreased in gross profit margin was primarily due to lower volume and unfavorable product mix, which was partially offset by improved manufacturing efficiencies. In the Weighing Solutions segment, the decreased in gross profit margin was primarily due to lower volume. In the Measurement Systems segment, gross profit margin decreased reflecting lower volume and unfavorable product mix.
Operationally Diversified
Each of VPG's business segments maintains and deploys distinct go-to-market strategies, technical expertise, capital requirements, and acquisition opportunities. We use an operationally diversified strategy and structure to be close to our customers and to leverage our high-level engineering expertise to optimize and enhance the performance of our customers' solutions. We seek to maximize the performance and value of our businesses by leveraging our accumulated experience, methodologies, and expertise in driving operational excellence across our functional areas, as well as in the allocation of capital and investment.
Optimize Core Competence
The Company’s core competencies include our innovative deep technical and applications-specific expertise, our strong brands and customer relationships, our focus on operational excellence, our ability to select and develop our management teams, and our proven M&A strategy. We continue to optimize all aspects of our development, manufacturing and sales processes, including by increasing our technical sales efforts; continuing to innovate in product performance and design; and refining our manufacturing processes.
Our Sensors segment research group developed innovations that enhance the capability and performance of our strain gages, while simultaneously reducing their size and power consumption as part of our advanced sensors product line. We believe this unique foil technology will create new markets as customers “design in” these next generation products in existing and new applications. Our development engineering team is also responsible for creating new processes to further automate manufacturing, and improve productivity and quality. Our advanced sensors manufacturing technology also offers us the capability to produce high-quality foil strain gages in a highly automated environment, which we believe results in reduced manufacturing and lead times, improved quality and increased margins. As a sign of our commitment to these businesses, we signed a long-term lease for a state-of-the-art facility that has been constructed in Israel and fully transitioned to this facility in the third quarter of fiscal 2021.
Our design, research, and product development teams, in partnership with our marketing teams, drive our efforts to bring innovations to market. We intend to leverage our insights into customer demand to continually develop and roll out new, innovative products within our existing lines and to modify our existing core products in ways that make them more appealing, addressing changing customer needs and industry trends in terms of form, fit, and function.
We also seek to achieve significant production cost savings through the transfer, expansion, and construction of manufacturing operations in countries such as India, Japan, and Israel, where we can benefit from improved efficiencies or available tax and other government-sponsored incentives. In the past several years, we incurred restructuring expense related to closing and downsizing of facilities as part of the manufacturing transitions of our load cell products to facilities in India, which marked key milestones in our ongoing strategic initiatives to align and consolidate our manufacturing footprint.
Acquisition Strategy
We expect to continue to make strategic acquisitions where opportunities present themselves to grow and expand our segments. Our acquisition strategy is focused on identifying and acquiring high-value, growing technology-driven businesses that augment, expand and/or leverage our current offering in precision measurement and sensor markets. We expect to expand our expertise and acquisition focus to other precision measurement solutions, including in the fields of measurement of force, weight, pressure, torque, tilt, motion, and acceleration. We believe acquired businesses will benefit from improvements we implement to reduce redundant functions and from our current global manufacturing and distribution footprint.
Research and Development
Research and development will continue to play a key role in our efforts to introduce innovative products to generate new sales and to improve profitability. We expect to continue to expand our position as a leading supplier of precision foil technology products. We believe our R&D efforts should provide us with a variety of opportunities to leverage technology, products, and our manufacturing base in order to ultimately improve our financial performance. The amount charged to expense for research and development was $20.0 million, $20.4 million, and $19.8 million for the years ended December 31, 2024, 2023, and 2022, respectively.
- 33 -
Cost Management
To be successful, we believe we must seek new strategies for controlling operating costs. Through automation in our plants, we believe we can optimize our capital and labor resources in production, inventory management, quality control, and warehousing. We are in the process of moving some manufacturing to more cost effective locations. This may enable us to become more efficient and cost competitive, and also maintain tighter controls of the operation.
Production transfers, facility consolidations, and other long-term cost-cutting measures require us to initially incur significant severance and other exit costs. We are realizing the benefits of our restructuring through lower labor costs and other operating expenses, and expect to continue reaping these benefits in future periods. However, these programs to improve our profitability also involve certain risks which could materially impact our future operating results, as further detailed in Part I, Item 1A “Risk Factors” of this Annual Report on Form 10-K.
The Company recorded restructuring costs of $1.1 million, $1.6 million, and $1.5 million during the years ended December 31, 2024, 2023, and 2022, respectively, which were comprised primarily of employee termination costs, including severance and statutory retirement allowances.
We are evaluating plans to further reduce our costs by consolidating additional manufacturing operations. These plans may require us to incur restructuring and severance costs in future periods. While streamlining and reducing fixed overhead, we are exercising caution so that we will not negatively impact our customer service or our ability to further develop products and processes.
Foreign Currency
We are exposed to foreign currency exchange rate risks, particularly due to transactions in currencies other than the functional currencies of certain subsidiaries. U.S. GAAP requires that entities identify the “functional currency” of each of their subsidiaries and measure all elements of the financial statements in that functional currency. A subsidiary’s functional currency is the currency of the primary economic environment in which it operates. In cases where a subsidiary is relatively self-contained within a particular country, the local currency is generally deemed to be the functional currency. However, a foreign subsidiary that is a direct and integral component or extension of the parent company’s operations generally would have the parent company’s currency as its functional currency. We have subsidiaries that fall into each of these categories.
Foreign Subsidiaries which use the Local Currency as the Functional Currency
Our operations in Europe, Canada, and certain locations in Asia primarily generate and expend cash using local currencies, and accordingly, these subsidiaries utilize the local currency as their functional currency. For those subsidiaries where the local currency is the functional currency, assets and liabilities in the consolidated balance sheets have been translated at the rate of exchange as of the balance sheet date. Translation adjustments do not impact the results of operations and are reported as a separate component of equity.
For those subsidiaries where the local currency is the functional currency, revenues and expenses are translated at the average exchange rate for the year. While the translation of revenues and expenses into U.S. dollars does not directly impact the consolidated statements of operations, the translation effectively increases or decreases the U.S. dollar equivalent of revenues generated and expenses incurred in those foreign currencies.
Foreign Subsidiaries which use the U.S. Dollar as the Functional Currency
Our operations in Israel and certain locations in Asia primarily generate cash in U.S. dollars, and accordingly, these subsidiaries utilize the U.S. dollar as their functional currency. For those foreign subsidiaries where the U.S. dollar is the functional currency, all foreign currency financial statement amounts are remeasured into U.S. dollars. Exchange gains and losses arising from remeasurement of foreign currency-denominated monetary assets and liabilities are included in the results of operations. While these subsidiaries transact most business in U.S. dollars, they may have significant costs, particularly related to payroll, which are incurred in the local currency and significant lease assets and liabilities.
Effects of Foreign Exchange Rate on Operations
For the year ended December 31, 2024, foreign exchange rate impacts decreased net revenues by $0.9 million and decrease costs of products sold and selling, general, and administrative expenses by $1.1 million. For the year ended December 31, 2023, foreign exchange rate impacts decreased net revenues by $2.2 million and decreased costs of products sold and selling, general, and administrative expenses by $9.1 million.
- 34 -
Critical Accounting Policies and Estimates
Our significant accounting policies are summarized in Note 1 to our consolidated financial statements. We identify here a number of policies that entail significant judgments or estimates by management.
Inventories
We value our inventories at the lower of cost or market, with cost determined under the first-in, first-out method, and market based upon net realizable value. The valuation of our inventories requires management to make costing and market estimates. For work in process goods, we are required to estimate the cost to completion of the products and the prices at which we will be able to sell the products. For finished goods, we must assess the prices at which we believe the inventory can be sold. Inventories are also adjusted for estimated obsolescence and written down to net realizable value based upon estimates of future demand, technology developments, and market conditions.
Business Combinations
The Company allocates the purchase price of an acquired company, including when applicable, the fair value of contingent consideration between tangible and intangible assets acquired and liabilities assumed from the acquired businesses based on estimated fair values, with any residual of the purchase price recorded as goodwill. Third party appraisal firms and other consultants are engaged to assist management in determining the fair values of certain assets acquired and liabilities assumed. Different valuations approaches are used to value different types of intangible assets. The Company primarily uses the income approach in the valuation of intangible assets. The income approach to valuation is based on the present value of future cash flows attributable to each identifiable intangible asset. This approach to valuation requires management to make significant estimates and assumptions including but not limited to: discount rates, future cash flows and the economic lives of trade names, technology, and customer relationships. These estimates are based on historical experience and information obtained from the management of the acquired companies, and are inherently uncertain.
Goodwill and Other Indefinite-lived Intangible Assets
Goodwill and indefinite-lived trademarks are tested for impairment at least annually, and whenever events or changes in circumstances occur indicating that it is "more likely than not" impairment may have been incurred. We have the option to first assess qualitative factors to determine whether it is "more likely than not" that the fair value of a reporting unit is less than its carrying value as a basis for determining if it is necessary to perform the quantitative goodwill impairment test. However, if we conclude otherwise, then we are required to perform the quantitative impairment test by calculating the fair value of the reporting unit and comparing it against its carrying value.
The Company has four reporting units to which goodwill was allocated: steel, on-board weighing, DSI, and DTS. In 2024 the Company performed a quantitative impairment test for all its reporting units. In estimating the fair value of our reporting units the Company used the income approach. The income approach to valuation requires management to make significant estimates and assumptions related to future revenues, profitability, working capital requirements and selection of discount rate and long term growth rate. Changes in these estimates and assumptions could have a significant impact on the fair value of the reporting units. If the fair value exceeds the carrying value, no further evaluation is required and no impairment loss is recognized. An impairment charge would be recognized to the extent the carrying value of goodwill exceeds the reporting unit fair value.
The indefinite-lived trade names are tested for impairment either by employing the qualitative approach outlined above, or by comparing the carrying value to the fair value based on current revenue projections of the related operations, under the relief from royalty method. Any excess carrying value over the applicable fair value is recognized as impairment. Any impairment would be recognized in the reporting period in which it has been identified.
Pension and Other Postretirement Benefits
Accounting for defined benefit pension and other postretirement plans involves numerous assumptions and estimates. The discount rate at which obligations could effectively be settled and the expected long-term rate of return on plan assets are two critical assumptions in measuring the cost and benefit obligations of our pension and other postretirement benefit plans. Other important assumptions include the anticipated rate of future increases in compensation levels, estimated mortality, and for postretirement medical plans, increases or trends in health care costs. Management reviews these assumptions at least annually. We use independent actuaries to assist us in formulating assumptions and making estimates. These assumptions are updated periodically to reflect the actual experience and expectations on a plan-specific basis, as appropriate.
Our defined benefit plans are concentrated in the United States, Japan and the United Kingdom. Plans in these countries comprise approximately 86% of our retirement obligations at December 31, 2024. We utilize published long-term high-quality bond indices to determine the discount rate at the measurement date. We utilize bond yields at various maturity dates to reflect
- 35 -
the timing of expected future benefit payments. We believe the discount rates selected are the rates at which these obligations could effectively be settled.
For benefit plans which are funded, we establish strategic asset allocation percentage targets and appropriate benchmarks for significant asset classes with the aim of achieving a prudent balance between return and risk. We set the expected long-term rate of return based on the expected long-term average rates of return to be achieved by the underlying investment portfolios. In establishing this rate, we consider historical and expected returns for the asset classes in which the plans are invested, advice from pension consultants and investment advisors, and current economic and capital market conditions. The expected return on plan assets is incorporated into the computation of pension expense. The difference between this expected return and the actual return on plan assets is deferred.
We believe that the current assumptions used to estimate plan obligations and annual expense are appropriate in the current economic environment. However, if economic conditions change, we may be inclined to change some of our assumptions, and the resulting change could have a material impact on the consolidated statements of operations and on the consolidated balance sheets.
Income Taxes
We are subject to income taxes in the United States and numerous foreign jurisdictions. Our annual effective tax rate is based on pre-tax earnings, statutory tax rates and enacted tax laws. Significant judgments and estimates must be made in determining our consolidated income tax expense as presented in our financial statements.
We must assess the likelihood that we will realize deferred tax assets which requires significant judgment. If we determine that deferred tax assets are not "more likely than not" to be realized, we record a valuation allowance to reduce deferred tax assets to a level that is expected to be realized. If we subsequently determine that realization of a deferred tax asset becomes "more likely than not", the valuation allowance will be reversed. Any change in valuation allowances could have a significant impact on our financial results.
The calculation of our tax liabilities involves an assessment of uncertainties in the application of complex tax laws and regulations in multiple jurisdictions. We record a benefit from an uncertain tax position when it is "more likely than not" that a tax return position will be sustained upon examination, including resolutions of any related appeals or litigation based on the technical merits of the position. If the position is not "more likely than not" to be sustained, a liability for the tax return position is established. We adjust the liability when our judgment changes as a result of the evaluation of new information. The ultimate tax due in a jurisdiction may result in a payment that is materially different from our most recent estimate of the liability. Further judgment is required in determining whether an uncertain tax position is effectively settled. Any change in the analysis will impact income tax expense.
We consider the earnings of most of our non-U.S. subsidiaries to be indefinitely invested outside the United States based on our estimates that future domestic cash generation will be sufficient to meet future domestic cash needs and our plans for reinvestment of foreign subsidiary earnings. As of December 31, 2024, the Company had provided for a deferred tax liability of $2.3 million of withholding tax associated with $25.3 million of unremitted, non-permanently reinvested earnings. Additional withholding taxes of approximately $32.0 million are estimated to be payable upon the distribution of the remaining unremitted earnings at December 31, 2024. If we decide to distribute any portion of the balance of our unremitted earnings to the United States from a foreign country, we would adjust our income tax provision in the period we determine that the earnings are no longer indefinitely invested outside the United States.
Additional information about income taxes is included in Note 7 to our consolidated financial statements.
- 36 -
Results of Operations – Years Ended December 31, 2024 and 2023
Refer to Item 7, "Results of Operations - Years Ended December 2023 and 2022 in our Annual Report on Form 10-K for the year ended December 31, 2023 for a comparison of the year ended December 31, 2023 to the year ended December 31, 2022.
Statement of operations’ captions as a percentage of net revenues and the effective tax rates were as follows:
| Years ended December 31, | |||||||||||||||||
| 2024 | 2023 | ||||||||||||||||
| Costs of products sold | 59.0 | % | 57.7 | % | |||||||||||||
| Gross profit | 41.0 | % | 42.3 | % | |||||||||||||
| Selling, general, and administrative expenses | 35.1 | % | 30.1 | % | |||||||||||||
| Operating income | 5.5 | % | 11.8 | % | |||||||||||||
| Income before taxes | 5.7 | % | 10.8 | % | |||||||||||||
| Net earnings | 3.2 | % | 7.3 | % | |||||||||||||
| Net earnings attributable to VPG stockholders | 3.2 | % | 7.2 | % | |||||||||||||
| Effective tax rate | 44.0 | % | 32.3 | % | |||||||||||||
Net Revenues
Net revenues were as follows (dollars in thousands):
| Years ended December 31, | |||||||||||||||||
| 2024 | 2023 | ||||||||||||||||
| Net revenues | $ | 306,522 | $ | 355,048 | |||||||||||||
| Change versus prior year | $ | (48,526) | |||||||||||||||
| Percentage change versus prior year | (13.7) | % | |||||||||||||||
Changes in net revenues were attributable to the following:
| 2024 vs. 2023 | |||||||||||
| Change attributable to: | |||||||||||
| Change in volume | (13.8) | % | |||||||||
| Change in average selling prices | 0.5 | % | |||||||||
| Foreign currency effects | (0.4) | % | |||||||||
| Net change | (13.7) | % | |||||||||
Gross Profit Margin
Gross profit as a percentage of net revenues was as follows:
| Years ended December 31, | |||||||||||||||||
| 2024 | 2023 | ||||||||||||||||
| Gross profit margin | 41.0 | % | 42.3 | % | |||||||||||||
The gross profit margin for the year ended December 31, 2024 decreased 1.3% over the prior year. The decrease in gross profit margin was primarily due to decreased gross profit margins in the Weighing Solutions and Sensors reporting segments partially offset by increased gross profit margin in the Measurement Systems reporting segment.
- 37 -
Segments
Analysis of revenues and gross profit margins for our reportable segments is provided below.
Sensors
Net revenues of the Sensors segment were as follows (dollars in thousands):
| Years ended December 31, | |||||||||||||||||
| 2024 | 2023 | ||||||||||||||||
| Net revenues | $ | 112,238 | $ | 139,783 | |||||||||||||
| Change versus prior year | $ | (27,545) | |||||||||||||||
| Percentage change versus prior year | (19.7) | % | |||||||||||||||
Changes in Sensors segment net revenues were attributable to the following:
| 2024 vs. 2023 | |||||||||||
| Change attributable to: | |||||||||||
| Change in volume | (19.8) | % | |||||||||
| Change in average selling prices | 0.9 | % | |||||||||
| Foreign currency effects | (0.8) | % | |||||||||
| Net change | (19.7) | % | |||||||||
For the year ended December 31, 2024, net revenues decreased 19.7% as compared to the prior year, due to lower sales of precision resistors in the Test and Measurement and the AMS markets, and lower sales of advanced sensors products primarily in the AMS market.
Gross profit as a percentage of net revenues for the Sensors segment was as follows:
| Years ended December 31, | |||||||||||||||||
| 2024 | 2023 | ||||||||||||||||
| Gross profit margin | 34.5 | % | 39.4 | % | |||||||||||||
For the year ended December 31, 2024, the gross profit margin decreased 4.9% as compared to the prior year primarily due to lower volume.
Weighing Solutions
Net revenues of the Weighing Solutions segment were as follows (dollars in thousands):
| Years ended December 31, | |||||||||||||||||
| 2024 | 2023 | ||||||||||||||||
| Net revenues | $ | 107,205 | $ | 122,528 | |||||||||||||
| Change versus prior year | $ | (15,323) | |||||||||||||||
| Percentage change versus prior year | (12.5) | % | |||||||||||||||
Changes in Weighing Solutions segment net revenues were attributable to the following:
| 2024 vs. 2023 | |||||||||||
| Change attributable to: | |||||||||||
| Change in volume | (12.8) | % | |||||||||
| Change in average selling prices | 0.0 | % | |||||||||
| Foreign currency effects | 0.3 | % | |||||||||
| Net change | (12.5) | % | |||||||||
For the year ended December 31, 2024, net revenues decreased 12.5% from the prior year.
- 38 -
Gross profit as a percentage of net revenues for the Weighing Solutions segment was as follows:
| Years ended December 31, | |||||||||||||||||
| 2024 | 2023 | ||||||||||||||||
| Gross profit margin | 36.6 | % | 37.0 | % | |||||||||||||
For the year ended December 31, 2024, the gross profit margin decreased 0.4% as compared to the prior year, due to lower volume.
Measurement Systems
Net revenues of the Measurement Systems segment were as follows (dollars in thousands):
| Years ended December 31, | |||||||||||||||||
| 2024 | 2023 | ||||||||||||||||
| Net revenues | $ | 87,079 | $ | 92,737 | |||||||||||||
| Change versus prior year | $ | (5,658) | |||||||||||||||
| Percentage change versus prior year | (6.1) | % | |||||||||||||||
Changes in Measurement Systems segment net revenues were attributable to the following:
| 2024 vs. 2023 | |||||||||||
| Change attributable to: | |||||||||||
| Change in volume | (6.0) | % | |||||||||
| Change in average selling prices | 0.5 | % | |||||||||
| Foreign currency effects | (0.6) | % | |||||||||
| Net change | (6.1) | % | |||||||||
For the year ended December 31, 2024, net revenues decreased 6.1% as compared to the prior year, primarily attributable to lower sales of DSI and DTS products partially offset by the added revenue related to the acquisition of Nokra on September 30, 2024.
Gross profit as a percentage of net revenues for the Measurement Systems segment was as follows:
| Years ended December 31, | |||||||||||||||||
| 2024 | 2023 | ||||||||||||||||
| Gross profit margin | 54.6 | % | 53.8 | % | |||||||||||||
For the year ended December 31, 2024, the gross profit margin increased 0.8% from the prior year mostly due to favorable product mix partially offset by lower volume.
Selling, General, and Administrative Expenses
Selling, general, and administrative (“SG&A”) expenses were as follows (dollars in thousands):
| Years ended December 31, | |||||||||||||||||
| 2024 | 2023 | ||||||||||||||||
| Total SG&A expenses | $ | 107,505 | $ | 106,828 | |||||||||||||
| as a percentage of net revenues | 35.1 | % | 30.1 | % | |||||||||||||
SG&A expenses for the year ended December 31, 2024 increased $0.7 million as compared to the prior year mostly due to added personnel costs related to the acquisition of Nokra on September 30, 2024.
- 39 -
Impairment of Goodwill and Indefinite-lived Intangible Assets
For the years ended December 31, 2024 and December 31, 2023, no impairment of goodwill and indefinite-lived intangible assets was recorded.
Restructuring Costs
Restructuring costs reflect the cost reduction programs implemented by the Company. Restructuring costs are expensed during the period in which the Company determines it will incur those costs and all requirements for accrual are met. Because these costs are recorded based upon estimates, actual expenditures for the restructuring activities may differ from the initially recorded costs. If the initial estimates are too low or too high, the Company could be required to either record additional expense in future periods, or to reverse part of the previously recorded charges.
The Company recorded restructuring costs of $1.1 million and $1.6 million during the years ended December 31, 2024 and 2023, respectively. Restructuring costs were comprised primarily of employee termination costs, including severance and statutory retirement allowances, and were incurred in connection with various cost reduction programs.
Acquisition Costs
For the year ended December 31, 2024, we recorded acquisition costs in our consolidated statements of operations of $0.1 million in connection with the acquisition of Nokra. There were no acquisition costs recorded in our consolidated statements of operations for the year ended December 31, 2023.
Other Income (Expense)
Interest Expense
The Company recorded interest expense of $2.5 million, and $4.0 million for the years ended December 31, 2024 and 2023, respectively. Interest expense was lower in 2024 compared to 2023 mainly due to partial repayment of loans that occurred in the second half of 2023 and lower borrowing rates during 2024.
Other
The following table analyzes the components of the line “Other” on the consolidated statements of operations (in thousands):
| Years ended December 31, | |||||||||||||||||
| 2024 | 2023 | Change | |||||||||||||||
| Foreign currency exchange gain/(loss) | $ | 1,878 | $ | (822) | $ | 2,700 | |||||||||||
| Interest income | 1,673 | 1,651 | 22 | ||||||||||||||
| Pension expense | (55) | (52) | (3) | ||||||||||||||
| Other | (284) | (321) | 37 | ||||||||||||||
| $ | 3,212 | $ | 456 | $ | 2,756 | ||||||||||||
Foreign currency exchange gains and losses represent the impact of changes in foreign currency exchange rates. The change in foreign currency exchange gains / (losses) for the year ended December 31, 2024, as compared to the prior year period, is primarily due to fluctuations in the Japanese Yen, Israeli shekel and the Canadian dollar.
Income Taxes
Our effective tax rate for the year ended December 31, 2024 was 44.0%, as compared to 32.3% for the year ended December 31, 2023. Our effective tax rate was higher in 2024 compared to 2023 primarily due to increases in valuation allowances and changes in our geographical mix of income.
We reassessed our ability to realize our U.S. deferred tax assets during 2024 and have concluded that realization of those deferred tax assets is still not "more likely than not". Our tax rate is affected by recurring items, such as tax rates in foreign jurisdictions as compared to the U.S. federal statutory tax rate, and the relative amount of income earned in each jurisdiction. The tax rate is also impacted by discrete items that vary from year to year and may not be indicative of the tax rate on continuing operations. The following items had the most significant impact on the difference between the statutory U.S. federal income tax rate and our effective tax rate:
- 40 -
2024
•15.3% increase related to the effects of foreign operations primarily related to the difference between the U.S. statutory rate and foreign tax rates
•7.6% increase related to changes in valuation allowances
•1.0% increase related to statutory tax rate changes
•2.9% decrease related to specialty tax credits, such as research credits
2023
•6.2% increase related to the effects of foreign operations primarily related to the difference between the U.S. statutory rate and foreign tax rates
•3.3% increase related to changes in valuation allowances
•2.3% increase related to residual U.S. tax on foreign earnings
•1.2% increase related to changes in reserves for uncertain tax positions
•1.4% decrease related to specialty tax credits, such as research credits
Additional information about income taxes is included in Note 7 to our consolidated financial statements.
Financial Condition, Liquidity, and Capital Resources
Refer to Item 7. “Financial Condition, Liquidity, and Capital Resources” in our Annual Report on Form 10-K for the year ended December 31, 2023 for a comparison of the year ended December 31, 2023 to the year ended December 31, 2022.
We believe that our current cash and cash equivalents, credit facilities, and projected cash from operations will be sufficient to meet our liquidity needs for at least the next 12 months.
On August 15, 2024, the Company entered into a Fourth Amended and Restated Credit Agreement (the “2024 Credit Agreement”) among the Company, the lenders party thereto, JPMorgan Chase Bank, N.A., Wells Fargo Bank, N.A. and HSBC as joint lead arrangers and joint bookrunner, and JPMorgan Chase Bank, N.A, as agent for such lenders (the “Agent”), pursuant to which the Company’s existing credit facility was amended and restated to, among other things, extend the maturity date from March 20, 2025 to August 15, 2029 and adjust the interest rate and commitment fee. The 2024 Credit Agreement provides for a multi-currency, secured credit facility (the “2024 Revolving Facility”) in an aggregate principal amount of $75.0 million, with a sublimit of $10.0 million which can be used for letters of credit for the account of the Company or its subsidiaries that are parties to the 2024 Credit Agreement, the proceeds of which may be used for working capital and general corporate purposes, and a portion of which were used to refinance the Company’s existing revolving credit facility. The aggregate principal amount of the 2024 Revolving Facility may be increased by a maximum of $25.0 million upon the request of the Company, subject to the terms of the 2024 Credit Agreement. The Company may elect to make loans under the 2024 Revolving Facility in US Dollars, Euros, Canadian Dollars, Sterling, Japanese Yen or such other freely convertible foreign currency.
Amounts borrowed under the 2024 Revolving Facility accrue interest in an amount equal to a floating rate plus a specified margin. Such floating rates are (i) for loans denominated in US Dollars, at the Company’s option, either (a) the greatest of: the Agent’s prime rate, the Federal Funds rate, or a 1.00% floor (the “US Base Rate”), or (b) the Secured Overnight Financing Rate (“SOFR”), (ii) for loans denominated in Canadian Dollars, at the Company’s option, either (x) the greatest of: the PRIMCAN Index rate, the average 30 day rate for loans accruing interest based on the Canadian Overnight Repo Rate Average (“CORRA”) (the “Canadian Base Rate”), or (y) CORRA, (iii) for loans denominated in Pounds Sterling, the Sterling Overnight Index Average (“SONIA”), (iv) for loans denominated in Euros, the Euro Interbank Offered Rate (“EURIBOR"), and (v) for loans denominated in Japanese Yen, the Tokyo Interbank Offered Rate (“TIBOR”).
The specified interest margin for US Base Rate Loans and Canadian Base Rate Loans is 0.25%. Depending upon the Company’s leverage ratio, the interest rate margin for loans based on SOFR, CORRA, SONIA, EURIBOR and TIBOR ranges from 1.75% to 3.00% per annum. The Company is required to pay a quarterly fee of 0.20% per annum to 0.40% per annum on the unused portion of the 2024 Revolving Facility, which is also determined based on the Company’s leverage ratio. Additional customary fees apply with respect to letters of credit.
The obligations of the Company under the 2024 Credit Agreement are secured by pledges of stock in certain domestic and foreign subsidiaries, as well as guarantees by substantially all of the Company’s domestic subsidiaries. The obligations of the Company and the guarantors under the 2024 Credit Agreement are secured by substantially all the assets (excluding real estate) of the Company and such guarantors. The 2024 Credit Agreement restricts the Company from paying cash dividends and requires the Company to comply with other customary covenants, representations, and warranties, including the maintenance of a specified interest coverage ratio and a leverage ratio, each tested as of the last day of each fiscal quarter. If the Company is not in compliance with any of these covenant restrictions, the 2024 Revolving Facility could be terminated by the lenders, and all amounts outstanding pursuant to the 2024 Credit Agreement could become immediately payable.
- 41 -
Our business has historically generated significant cash flow. Our cash provided by operating activities for the year ended December 31, 2024 was $19.8 million as compared to $45.9 million for the year ended December 31, 2023. Our net cash used in investing activities for the year ended December 31, 2024 was $12.9 million, compared to $15.1 million for the year ended December 31, 2023. Our net cash used in financing activities for the year ended December 31, 2024 was $9.4 million, which included a pay down on the 2020 credit facility of $0.0 million, as compared to $35.9 million for the year ended December 31, 2023.
Approximately 94% and 92% of our cash and cash equivalents balance at December 31, 2024 and 2023, respectively, was held by our non-U.S. subsidiaries. See the following table for the percentage of cash and cash equivalents, by region of subsidiary, at December 31, 2024 and December 31, 2023:
| December 31, | |||||||||||
| 2024 | 2023 | ||||||||||
| Asia | 21 | % | 22 | % | |||||||
| United States | 6 | % | 8 | % | |||||||
| Israel | 56 | % | 36 | % | |||||||
| Europe | 14 | % | 23 | % | |||||||
| Canada | 3 | % | 11 | % | |||||||
| Total | 100 | % | 100 | % | |||||||
We earn a significant amount of our operating income outside the United States, the majority of which is deemed to be indefinitely reinvested in the foreign jurisdictions. As a result, as discussed above, a significant portion of our cash and short-term investments are held by foreign subsidiaries. The Company will continue to evaluate its cash needs, however we currently do not intend, nor do we foresee a need, to repatriate funds in excess of what is already planned. The Company will evaluate the possibility of repatriating future cash provided such repatriation can be accomplished in a tax efficient manner. In addition, we expect existing domestic cash, short-term investments, and cash flows from operations to continue to be sufficient to fund our domestic operating activities and cash commitments for investing and financing activities, such as debt repayment and capital expenditures, for at least the next 12 months and thereafter for the foreseeable future.
If we should require more capital in the United States than is generated by our domestic operations, for example, to fund significant discretionary activities, such as business acquisitions, we could elect to repatriate future earnings from foreign jurisdictions or raise capital in the United States through debt or equity issuances. These alternatives could result in higher tax expense, increased interest expense, or dilution of our earnings. We consider the majority of the undistributed earnings of our foreign subsidiaries, as of December 31, 2024, to be indefinitely reinvested.
For the year ended December 31, 2024, we generated adjusted free cash flow of $11.3 million. We define “adjusted free cash flow,” a measure which management uses to evaluate our ability to fund acquisitions, as the amount of cash provided by operating activities ($19.8 million) in excess of our capital expenditures ($9.2 million) and net of proceeds from the sale of assets ($0.7 million).
The following table summarizes the components of net cash at December 31, 2024 and at December 31, 2023 (in thousands):
| December 31, | |||||||||||
| 2024 | 2023 | ||||||||||
| Cash and cash equivalents | $ | 79,272 | $ | 83,965 | |||||||
| Third-party debt, including current and long-term | |||||||||||
| Revolving debt | 32,000 | 32,000 | |||||||||
| Deferred financing costs | (559) | (144) | |||||||||
| Total third-party debt | 31,441 | 31,856 | |||||||||
| Net cash | $ | 47,831 | $ | 52,109 | |||||||
Measurements such as “adjusted free cash flow” and “net cash" do not have uniform definitions and are not recognized in accordance with U.S. GAAP. Such measures should not be viewed as alternatives to GAAP measures of performance or liquidity. However, management believes that “adjusted free cash flow” is a meaningful measure of our ability to fund acquisitions, and that an analysis of “net cash” assists investors in understanding aspects of our cash and debt management. These measures, as calculated by us, may not be comparable to similarly titled measures used by other companies.
- 42 -
Our financial condition as of December 31, 2024 is strong, with a current ratio (current assets to current liabilities) of 4.5 to 1.0, as compared to a current ratio of 3.9 to 1.0 at December 31, 2023.
Cash paid for property and equipment for the year ended December 31, 2024 and December 31, 2023 was $9.2 million and $15.2 million, respectively. Capital spending for 2024 was comprised of building projects related to capacity expansion in Israel and Asia, and other projects related to the normal maintenance of business. Capital expenditures for 2025 are expected to be approximately $12.4 million.
As of December 31, 2024 and 2023, we did not have any off-balance sheet arrangements.
Inflation
Normally, inflation does not have a significant impact on our operations as our products are not generally sold on long-term contracts. Consequently, we can adjust our selling prices, to the extent permitted by competition, to reflect cost increases caused by inflation.
Recent Accounting Pronouncements
See Note 1 to our consolidated financial statements for a discussion of recent accounting pronouncements.
Forward-Looking Statements
From time to time, information provided by us, including, but not limited to, statements in this Annual Report on Form 10-K for the fiscal year ended December 31, 2024, or other statements made by or on our behalf, may contain or constitute "forward-looking" information within the meaning of the Private Securities Litigation Reform Act of 1995. Such statements involve a number of risks, uncertainties, and contingencies, many of which are beyond our control, which may cause actual results, performance, or achievements to differ materially from those anticipated.
Such statements are based on current expectations only, and are subject to certain risks, uncertainties, and assumptions. Should one or more of these risks or uncertainties materialize, or should underlying assumptions prove incorrect, actual results may vary materially from those anticipated, expected, estimated, or projected. Among the factors that could cause actual results to materially differ include: general business and economic conditions; impact of inflation; potential issues respecting the United States federal government debt ceiling; global labor and supply chain challenges; difficulties or delays in identifying, negotiating and completing acquisitions and integrating acquired companies; the inability to realize anticipated synergies and expansion possibilities; difficulties in new product development; changes in competition and technology in the markets that we serve and the mix of our products required to address these changes; changes in foreign currency exchange rates; political, economic, and health (including pandemics) instabilities; instability caused by military hostilities in the regions or countries in which we operate (including Israel); difficulties in implementing our cost reduction strategies, such as underutilization of production facilities, labor unrest or legal challenges to our lay-off or termination plans, operation of redundant facilities due to difficulties in transferring production to achieve efficiencies; compliance issues under applicable laws, such as export control laws, including the outcome of our voluntary self-disclosure of export control non-compliance; significant developments from the recent and potential changes in tariffs and trade regulation; our ability to execute our new corporate strategy and business continuity, operational and budget plans; and other factors affecting our operations, markets, products, services, and prices that are set forth in this Annual Report on Form 10-K for the fiscal year ended December 31, 2024. We caution you not to place undue reliance on forward-looking statements, which speak only as of the date of this report or as of the dates otherwise indicated in such forward-looking statements. We undertake no obligation to publicly update or revise any forward-looking statements, whether as a result of new information, future events, or otherwise.
Item 7A. QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK
We are exposed to certain financial risks, including fluctuations in foreign currency exchange rates, interest rates, and commodity prices. We manage our exposure to these market risks through internally established policies and procedures. Our policies do not allow speculation in derivative instruments for profit or execution of derivative instrument contracts for which there are no underlying exposures. We do not use financial instruments for trading purposes and we are not a party to any leveraged derivatives. We monitor our underlying market risk exposures on an ongoing basis and believe that we can modify or adapt our strategies as needed.
Interest Rate Risk
We are exposed to changes in interest rates as a result of our borrowing activities and our cash balances.
We entered into a fourth amended and restated revolving credit facility on August 15, 2024. Interest payable on the facility is based upon a floating rate plus a specified margin, as described in Item 7. “Financial Condition, Liquidity, and Capital
- 43 -
Resources” in this Annual Report on Form 10-K. At December 31, 2024, we had $32.0 million of borrowings outstanding under the revolving credit facility.
At December 31, 2024, we had $79.3 million of cash and cash equivalents, which accrue interest at various variable rates.
Based on the debt and cash positions at December 31, 2024 and 2023, we would expect a 50 basis point increase or decrease in interest rates to increase or decrease our annualized net earnings by $0.2 million and $0.2 million in 2024 and 2023, respectively.
See Note 8 to our consolidated financial statements for additional information about our long-term debt.
Foreign Exchange Risk
We are exposed to foreign currency exchange rate risks, particularly due to market values of transactions in currencies other than the functional currencies of certain subsidiaries. Our significant foreign currency exposures are to the British pound, Canadian dollar, Chinese renminbi, euro, Indian rupee, Israeli shekel, Japanese yen, Swedish krona, and Taiwanese dollar.
Our operations in Europe, Canada, and certain locations in Asia primarily generate and expend cash in local currencies. Our operations in Israel and certain locations in Asia primarily generate cash in U.S. dollars, but these subsidiaries also have significant transactions in local currencies. Our exposure to foreign currency risk is mitigated to the extent that the costs incurred and the revenues earned in a particular currency offset one another. Our exposure to foreign currency risk, with respect to expenses, is more pronounced in Israel and India because the percentage of expenses denominated in Israeli shekels and Indian rupee to total expenses is much greater than the percentage of sales denominated in Israeli shekels and Indian rupee to total sales. Therefore, if the Israeli shekel and Indian rupee strengthen against all or most of our other major currencies, our operating profit is reduced. We also have a higher percentage of British pound-denominated sales than expenses. Therefore, when the British pound strengthens against all or most of our other major currencies, our operating profit is increased.
We have performed a sensitivity analysis as of December 31, 2024 and 2023, respectively, using a model that measures the change in the values arising from a hypothetical 10% adverse movement in foreign currency exchange rates relative to the U.S. dollar, with all other variables held constant. The foreign currency exchange rates we used were based on market rates in effect at December 31, 2024 and 2023, respectively. The sensitivity analysis indicated that a hypothetical 10% adverse movement in foreign currency exchange rates would impact our net earnings by approximately $4.1 million and $3.7 million for the years ended December 31, 2024 and December 31, 2023, respectively, although individual line items in our consolidated statements of operations could be materially affected. For example, a 10% weakening in all foreign currencies would increase the U.S. dollar equivalent of operating income generated in foreign currencies, which would be offset by foreign exchange losses of our foreign subsidiaries that have significant transactions in U.S. dollars or have the U.S. dollar as their functional currency.
A change in the mix of the currencies in which we transact our business could have a material effect on the estimated impact of the hypothetical 10% movement in the value of the U.S. dollar. Furthermore, the timing of cash receipts and disbursements could result in materially different actual results versus the hypothetical 10% movement in the value of the U.S. dollar, particularly if there are significant changes in exchange rates in a short period of time.
Commodity Price Risk
Although most materials incorporated in our products are available from a number of sources, certain materials are available only from a relatively limited number of suppliers. Some of the most highly specialized materials for our sensors are sourced from a single vendor. We maintain a safety stock inventory of certain critical materials at our facilities. Certain metals used in the manufacture of our products are traded on active markets, and can be subject to significant price volatility.
Our results of operations may be materially and adversely affected if we have difficulty obtaining these raw materials, the quality of available raw materials deteriorates, or there are significant price changes for these raw materials. For periods in which the prices of these raw materials are rising, we may be unable to pass on the increased cost to our customers which would result in decreased margins for the products in which they are used. For periods in which the prices are declining, we may be required to write down our inventory carrying cost of these raw materials, since we record our inventory at the lower of cost or market. Depending on the extent of the difference between market price and our carrying cost, this write-down could have a material adverse effect on our net earnings. We also may need to record losses for adverse purchase commitments for these materials in periods of declining prices.
We estimate that a 10% increase or decrease in the costs of raw materials subject to commodity price risk would decrease or increase our net earnings by $1.0 million and $1.2 million for the years ended December 31, 2024 and December 31, 2023, respectively, assuming that such changes in our costs have no impact on the selling prices of our products, and that we have no pending commitments to purchase metals at fixed prices.
- 44 -
Item 8. FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA
The financial statements required by this Item are included herein, commencing on page F-1 of this report.
Item 9. CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING AND FINANCIAL DISCLOSURE
None.
Item 9A. CONTROLS AND PROCEDURES
Disclosure Controls and Procedures
An evaluation was performed under the supervision and with the participation of our management, including the Chief Executive Officer (“CEO”) and Chief Financial Officer (“CFO”), of the effectiveness of the design and operation of our disclosure controls and procedures, as such term is defined under Rule 13a-15(e) and Rule 15d-15(e) promulgated under the Securities Exchange Act of 1934, as amended (the “Exchange Act”). Based on that evaluation, our CEO and CFO concluded that our disclosure controls and procedures were effective as of the end of the period covered by this annual report to ensure that information required to be disclosed in reports that we file or submit under the Exchange Act are: (1) recorded, processed, summarized, and reported within the time periods specified in the SEC’s rules and forms; and (2) accumulated and communicated to our management, including our CEO and CFO, as appropriate to allow timely decisions regarding required disclosure.
Our management, including our CEO and CFO, believes that any disclosure controls and procedures or internal controls and procedures, no matter how well conceived and operated, can provide only reasonable, not absolute, assurance that the objectives of the control system are met. Further, the design of a control system must consider the benefits of controls relative to their costs. Inherent limitations within a control system include the realities that judgments in decision-making can be faulty, and that breakdowns can occur because of a simple error or mistake. Additionally, controls can be circumvented by the individual acts of some persons, by collusion of two or more people, or by unauthorized override of the control. While the design of any system of controls is to provide reasonable assurance of the effectiveness of disclosure controls, such design is also based in part upon certain assumptions about the likelihood of future events, and such assumptions, while reasonable, may not take into account all potential future conditions. Accordingly, because of the inherent limitations in a cost effective control system, misstatements due to error or fraud may occur and may not be prevented or detected.
Changes in Internal Controls over Financial Reporting
There were no changes in our internal control over financial reporting during our last fiscal quarter that have materially affected, or are reasonably likely to materially affect, our internal control over financial reporting.
Management’s Annual Report on Internal Control over Financial Reporting
Our management is responsible for establishing and maintaining adequate internal control over financial reporting, as such term is defined in Exchange Act Rules 13a-15(f) and 15d-15(f). Under the supervision and with the participation of our management, including our CEO and CFO, we conducted an evaluation of the effectiveness of our internal control over financial reporting as of December 31, 2024 based on the 2013 framework set forth in Internal Control - Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission. Based on that evaluation, our management concluded that our internal control over financial reporting was effective as of December 31, 2024.
Brightman Almagor Zohar & Co., a firm in the Deloitte global network, has issued an attestation report on the effectiveness of our internal control over financial reporting, as stated in their report which is set forth on the next page.
- 45 -
Report of Independent Registered Public Accounting Firm
To the Stockholders and the Board of Directors of Vishay Precision Group, Inc.
Opinion on Internal Control over Financial Reporting
We have audited the internal control over financial reporting of Vishay Precision Group, Inc. and subsidiaries (the “Company”) as of December 31, 2024, based on criteria established in Internal Control-Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission (COSO). In our opinion, the Company maintained, in all material respects, effective internal control over financial reporting as of December 31, 2024, based on criteria established in Internal Control-Integrated Framework (2013) issued by COSO.
We have also audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States) (PCAOB), the consolidated financial statements as of and for the year ended December 31, 2024, of the Company and our report dated February 25, 2025, expressed an unqualified opinion on those financial statements.
Basis for Opinion
The Company’s management is responsible for maintaining effective internal control over financial reporting and for its assessment of the effectiveness of internal control over financial reporting included in the accompanying Management’s Report on Internal Control over Financial Reporting. Our responsibility is to express an opinion on the Company’s internal control over financial reporting based on our audit. We are a public accounting firm registered with the PCAOB and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.
We conducted our audit in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether effective internal control over financial reporting was maintained in all material respects.
Our audit included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, testing and evaluating the design and operating effectiveness of internal control based on the assessed risk, and performing such other procedures as we considered necessary in the circumstances. We believe that our audit provides a reasonable basis for our opinion.
Definition and Limitations of Internal Control Over Financial Reporting
A company’s internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company’s internal control over financial reporting includes those policies and procedures that (1) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (2) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (3) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company’s assets that could have a material effect on the financial statements.
Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.
/s/ Brightman Almagor Zohar & Co.
Certified Public Accountants
A Firm in the Deloitte Global Network
February 25, 2025
- 46 -
Item 9B. OTHER INFORMATION
During the fiscal quarter ended December 31, 2024, none of the Company’s directors or officers (as defined in Rule 16a-1(f) of the Securities Exchange Act of 1934, as amended) adopted terminated
Item 9C. DISCLOSURE REGARDING FOREIGN JURISDICTIONS THAT PREVENT INSPECTIONS.
None.
PART III
Item 10. DIRECTORS, EXECUTIVE OFFICERS, AND CORPORATE GOVERNANCE
Certain information required under this Item with respect to our Executive Officers is contained under the heading “Information about our Executive Officers” in Item 1 hereof. Other information required under this Item will be contained under the heading “Nominees for Election as Directors” in our definitive proxy statement for the Company’s 2025 Annual Meeting of Stockholders, which will be filed within 120 days of December 31, 2024, our most recent fiscal year end, and is incorporated herein by reference.
The Company has adopted codes of conduct that constitute “codes of ethics” as that term is defined in paragraph (b) of Item 406 of Regulation S-K and that apply to the Company’s principal executive officer, principal financial officer, principal accounting officer or controller, and to any persons performing similar functions. Such codes of conduct are posted on the Company’s internet website, the address of which is www.vpgsensors.com.
The Company has adopted insider trading policies and procedures governing the purchase, sale, and/or other dispositions of the Company’s securities by employees, officers, directors, or the Company itself, that are reasonably designed to promote compliance with insider trading laws, rules and regulations, and the listing standards applicable to the Company (the “Insider Trading Compliance Policy”). The Company’s Insider Trading Compliance Policy is filed as Exhibit 19.1 to this Annual Report.
Item 11. EXECUTIVE COMPENSATION
Information required under this Item will be contained in our definitive proxy statement for the Company’s 2025 Annual Meeting of Stockholders, which will be filed within 120 days of December 31, 2024, our most recent fiscal year end, and is incorporated herein by reference.
Item 12. SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT AND RELATED STOCKHOLDER MATTERS
Information required under this Item will be contained in our definitive proxy statement for the Company’s 2025 Annual Meeting of Stockholders, which will be filed within 120 days of December 31, 2024, our most recent fiscal year end, and is incorporated herein by reference.
Item 13. CERTAIN RELATIONSHIPS AND RELATED PARTY TRANSACTIONS, AND DIRECTOR INDEPENDENCE
Information required under this Item will be contained in our definitive proxy statement for the Company’s 2025 Annual Meeting of Stockholders, which will be filed within 120 days of December 31, 2024, our most recent fiscal year end, and is incorporated herein by reference.
Item 14. PRINCIPAL ACCOUNTING FEES AND SERVICES
Information required under this Item will be contained in our definitive proxy statement for the Company’s 2025 Annual Meeting of Stockholders, which will be filed within 120 days of December 31, 2024, our most recent fiscal year end, and is incorporated herein by reference.
- 47 -
PART IV
Item 15. EXHIBITS, FINANCIAL STATEMENT SCHEDULES
(a)Documents Filed as part of Form 10-K
i)Financial Statements
The Consolidated Financial Statements for the year ended December 31, 2024 are filed herewith. See index to the Consolidated Financial Statements on page F-1 of this report.
ii)Financial Statement Schedules
All financial statement schedules for which provision is made in the applicable accounting regulation of the Securities and Exchange Commission are not required under the related instructions or are inapplicable and therefore have been omitted.
iii)Exhibits
| Exhibit No. | Description | |||||||
| 3.1 | ||||||||
| 3.2 | ||||||||
| 3.3 | ||||||||
| 4.1 | ||||||||
| 10.1 | ||||||||
| 10.2 | ||||||||
| 10.3 | ||||||||
| 10.4 | ||||||||
| 10.5 | ||||||||
| 10.6* | ||||||||
| 10.7* | ||||||||
| 10.8* | ||||||||
| 10.9* | ||||||||
- 48 -
| Exhibit No. | Description | |||||||
| 10.10 | ||||||||
| 10.11* | ||||||||
| 10.12 | ||||||||
| 10.13 | ||||||||
| 10.14 | ||||||||
| 10.15 | ||||||||
| 10.16† | ||||||||
| 10.17† | ||||||||
| 10.18† | ||||||||
| 10.19† | ||||||||
| 10.20† | ||||||||
| 10.21† | ||||||||
| 10.22† | ||||||||
| 10.23† | ||||||||
| 10.24† | ||||||||
| 10.25† | ||||||||
| 10.26† | ||||||||
| 10.27† | ||||||||
| 10.28† | ||||||||
- 49 -
| Exhibit No. | Description | |||||||
| 10.29† | ||||||||
| 10.30† | ||||||||
| 10.31† | ||||||||
| 10.32† | ||||||||
| 10.33† | ||||||||
| 10.34† | ||||||||
| 10.35† | ||||||||
| 10.36† | ||||||||
| 10.37 | ||||||||
| 10.38† | ||||||||
| 10.39† | ||||||||
| 10.40† | ||||||||
| 10.41† | ||||||||
| 10.42† | ||||||||
| 10.43† | ||||||||
| 19.1 | ||||||||
| 21.1 | ||||||||
| 23.1 | ||||||||
| 31.1 | ||||||||
- 50 -
| Exhibit No. | Description | |||||||
| 31.2 | ||||||||
| 32.1 | ||||||||
| 32.2 | ||||||||
| 97.1 | ||||||||
| 101 | Interactive Data File (Annual Report on Form 10-K, for the year ended December 31, 2024, furnished in XBRL (eXtensible Business Reporting Language)). | |||||||
| 104 | Cover Page Interactive Data File formatted as Inline XBRL and contained in Exhibit 101. | |||||||
* Confidential treatment has been accorded to certain portions of this Exhibit. Omitted portions have been filed separately with the Securities and Exchange Commission.
† Denotes a management contract or compensatory plan, contract or arrangement.
Item 16. FORM 10-K SUMMARY
None.
- 51 -
SIGNATURES
Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.
| VISHAY PRECISION GROUP, INC. | |||||||||||
| By: | /s/ Ziv Shoshani | ||||||||||
| Ziv Shoshani | |||||||||||
Date: February 25, 2025 | President and Chief Executive Officer | ||||||||||
POWER OF ATTORNEY
Vishay Precision Group, Inc., a Delaware corporation, and each person whose signature appears below constitutes and appoints each of Ziv Shoshani and William M. Clancy, and either of them, such person’s true and lawful attorney-in-fact, with full power of substitution and resubstitution, for such person and in such person’s name, place and stead, in any and all capacities, to sign on such person’s behalf, individually and in each capacity stated below, any and all amendments to this Annual Report on Form 10-K and other documents in connection therewith, and to file the same and all exhibits thereto and other documents in connection therewith, with the Securities and Exchange Commission, granting unto said attorneys-in-fact, and each of them, full power and authority to do and perform each and every act and thing necessary or desirable to be done in and about the premises, as fully to all intents and purposes as he or she might or could do in person, thereby ratifying and confirming all that said attorneys-in-fact, or any of them, or their or his or her substitute or substitutes, may lawfully do or cause to be done by virtue hereof.
Pursuant to the requirements of the Securities Exchange Act of 1934, as amended, this Form 10-K has been signed by the following persons on behalf of the Registrant in the capacities and on the date indicated below.
- 52 -
| Signature | Title | Date | ||||||||||||
| /s/ Ziv Shoshani | Chief Executive Officer and Director | February 25, 2025 | ||||||||||||
| Ziv Shoshani | (Principal Executive Officer) | |||||||||||||
| /s/ William M. Clancy | Executive Vice President & Chief Financial Officer | February 25, 2025 | ||||||||||||
| William M. Clancy | (Principal Financial and Accounting Officer) | |||||||||||||
| /s/ Saul V. Reibstein | Director | February 25, 2025 | ||||||||||||
| Saul V. Reibstein | ||||||||||||||
| /s/ Marc Zandman | Director | February 25, 2025 | ||||||||||||
| Marc Zandman | ||||||||||||||
| /s/ Timothy V. Talbert | Director | February 25, 2025 | ||||||||||||
| Timothy V. Talbert | ||||||||||||||
| /s/ Janet Clarke | Director | February 25, 2025 | ||||||||||||
| Janet Clarke | ||||||||||||||
| /s/ Bruce Lerner | Director | February 25, 2025 | ||||||||||||
| Bruce Lerner | ||||||||||||||
| /s/ Sejal Shah Gulati | Director | February 25, 2025 | ||||||||||||
| Sejal Shah Gulati | ||||||||||||||
/s/ Erez Lorber | Director | February 25, 2025 | ||||||||||||
Erez Lorber | ||||||||||||||
/s/ Nava Swersky Sofer | Director | February 25, 2025 | ||||||||||||
Nava Swersky Sofer | ||||||||||||||
- 53 -
Vishay Precision Group, Inc.
Index to Consolidated Financial Statements
Report of Independent Registered Public Accounting Firm (PCAOB ID No. | F- | |||||||
| F- | ||||||||
| F- | ||||||||
| F- | ||||||||
| F- | ||||||||
| F- | ||||||||
| F- | ||||||||
F-1
Report of Independent Registered Public Accounting Firm
To the Stockholders and the Board of Directors of Vishay Precision Group, Inc.
Opinion on the Financial Statements
We have audited the accompanying consolidated balance sheets of Vishay Precision Group, Inc. and subsidiaries (the "Company") as of December 31, 2024 and 2023, the related consolidated statements of operations, comprehensive income (loss), equity, and cash flows for each of the three years in the period ended December 31, 2024, and the related notes (collectively referred to as the "financial statements”). In our opinion, the financial statements present fairly, in all material respects, the financial position of the Company as of December 31, 2024 and 2023, and the results of its operations and its cash flows for each of the three years in the period ended December 31, 2024, in conformity with accounting principles generally accepted in the United States of America.
We have also audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States) (PCAOB), the Company's internal control over financial reporting as of December 31, 2024, based on criteria established in Internal Control-Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission, and our report dated February 25, 2025, expressed an unqualified opinion on the Company's internal control over financial reporting.
Basis for Opinion
These financial statements are the responsibility of the Company's management. Our responsibility is to express an opinion on the Company’s financial statements based on our audits. We are a public accounting firm registered with the PCAOB and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.
We conducted our audits in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement, whether due to error or fraud. Our audits included performing procedures to assess the risks of material misstatement of the financial statements, whether due to error or fraud, and performing procedures that respond to those risks. Such procedures included examining, on a test basis, evidence regarding the amounts and disclosures in the financial statements. Our audits also included evaluating the accounting principles used and significant estimates made by management, as well as evaluating the overall presentation of the financial statements. We believe that our audits provide a reasonable basis for our opinion.
Critical Audit Matter
The critical audit matter communicated below is a matter arising from the current-period audit of the financial statements that was communicated or required to be communicated to the audit committee and that (1) relates to accounts or disclosures that are material to the financial statements and (2) involved our especially challenging, subjective, or complex judgments. The communication of critical audit matters does not alter in any way our opinion on the financial statements, taken as a whole, and we are not, by communicating the critical audit matter below, providing a separate opinion on the critical audit matter or on the accounts or disclosures to which it relates.
Goodwill – DSI and Onboard Weighing Reporting Units — Refer to Notes 1 and 5 to the Financial Statements
Critical Audit Matter Description
The Company's quantitative goodwill impairment test involves the comparison of the fair value of each reporting unit or asset to its carrying value.
In estimating the fair value of the DSI and Onboard Weighing reporting units, the Company used the income approach to evaluate the estimated fair value of the reporting units. The income approach to valuation requires management to make significant estimates and assumptions related to future revenues, profitability, working capital requirements and selection of discount and long term growth rates. Changes in these estimates and assumptions could have a significant impact on the fair value of the reporting units.
F-2
The carrying value of goodwill as of December 31, 2024, for the DSI and Onboard Weighing reporting units is $16.9 million and $6.3 million, respectively. The fair value of the DSI and Onboard Weighing reporting units exceed the carrying value, therefore, no impairment was recognized.
We identified goodwill for the DSI and Onboard Weighing reporting units as a critical audit matter because of the significant judgments made by management to estimate the fair value of the reporting unit and the difference between the fair value and carrying value. This required a high degree of auditor judgment and an increased extent of effort, including the need to involve our fair value specialists, when performing audit procedures to evaluate the reasonableness of management’s estimates and assumptions related to forecasts of future revenues, profitability, working capital requirements and selection of the discount and long term growth rates.
How the Critical Audit Matter Was Addressed in the Audit
Our audit procedures related to forecasts of future revenues, profitability, working capital requirements and selection of discount and long term growth rates used by management to estimate the fair value of the DSI and Onboard Weighing reporting units included the following, among others:
•We tested the effectiveness of controls over management’s impairment evaluation, including those over the determination of the fair value of the DSI and Onboard Weighing reporting units, such as controls related to management’s forecasts of future revenues, profitability, working capital requirements and selection of discount and long term growth rates.
•We evaluated management’s ability to accurately forecast operating performance by comparing actual results to management’s historical forecasts.
•We evaluated the reasonableness of management’s forecasts of future revenues, profitability and working capital requirements by comparing the forecasts to:
–Historical revenues, profitability and working capital requirements.
–Internal communications to management and the Board of Directors.
With the assistance of our fair value specialists, we evaluated the valuation methodologies and the reasonableness of the discount and long term growth rates, including testing the underlying source information and the mathematical accuracy of the calculations, and developing a range of independent estimates and comparing those to the discount rate and long term growth rates selected by management. In addition, we tested management's reconciliation of the fair value of all the reporting units to the market capitalization of the Company.
/s/ Brightman Almagor Zohar & Co.
Brightman Almagor Zohar & Co.
Certified Public Accountants
A Firm in the Deloitte Global Network
Tel Aviv, Israel
February 25, 2025
We have served as the Company’s auditor since 2019.
F-3
VISHAY PRECISION GROUP, INC.
Consolidated Balance Sheets
(In thousands, except share amounts)
| December 31, 2024 | December 31, 2023 | ||||||||||
| Assets | |||||||||||
| Current assets: | |||||||||||
| Cash and cash equivalents | $ | $ | |||||||||
Accounts receivable, net of allowances for credit losses of $ | |||||||||||
| Inventories: | |||||||||||
| Raw materials | |||||||||||
| Work in process | |||||||||||
| Finished goods | |||||||||||
| Inventories | |||||||||||
| Prepaid expenses and other current assets | |||||||||||
| Assets held for sale | |||||||||||
| Total current assets | |||||||||||
| Property and equipment: | |||||||||||
| Land | |||||||||||
| Buildings and improvements | |||||||||||
| Machinery and equipment | |||||||||||
| Software | |||||||||||
| Construction in progress | |||||||||||
| Accumulated depreciation | ( | ( | |||||||||
| Property and equipment, net | |||||||||||
| Goodwill | |||||||||||
| Intangible assets, net | |||||||||||
| Operating lease right-of-use assets | |||||||||||
| Other assets | |||||||||||
| Total assets | $ | $ | |||||||||
Continues on the following page
F-4
VISHAY PRECISION GROUP, INC.
Consolidated Balance Sheets (continued)
(In thousands, except share amounts)
| December 31, 2024 | December 31, 2023 | ||||||||||
| Liabilities and equity | |||||||||||
| Current liabilities: | |||||||||||
| Trade accounts payable | $ | $ | |||||||||
| Payroll and related expenses | |||||||||||
| Other accrued expenses | |||||||||||
| Income taxes | |||||||||||
| Current portion of operating lease liabilities | |||||||||||
| Total current liabilities | |||||||||||
| Long-term debt | |||||||||||
| Deferred income taxes | |||||||||||
| Operating lease liabilities | |||||||||||
| Other liabilities | |||||||||||
| Accrued pension and other postretirement costs | |||||||||||
| Total liabilities | |||||||||||
| Commitments and contingencies | |||||||||||
| Equity: | |||||||||||
Preferred stock, par value $ | |||||||||||
Common stock, par value $ | |||||||||||
Class B convertible common stock, par value $ | |||||||||||
Treasury stock, at cost - | ( | ( | |||||||||
Capital in excess of par value | |||||||||||
Retained earnings | |||||||||||
Accumulated other comprehensive loss | ( | ( | |||||||||
Total Vishay Precision Group, Inc. stockholders' equity | |||||||||||
Noncontrolling interests | ( | ||||||||||
Total equity | |||||||||||
Total liabilities and equity | $ | $ | |||||||||
See accompanying notes.
F-5
VISHAY PRECISION GROUP, INC.
Consolidated Statements of Operations
(In thousands, except per share amounts)
| Years ended December 31, | |||||||||||||||||
| 2024 | 2023 | 2022 | |||||||||||||||
| Net revenues | $ | $ | $ | ||||||||||||||
| Costs of products sold | |||||||||||||||||
| Gross profit | |||||||||||||||||
| Selling, general, and administrative expenses | |||||||||||||||||
| Acquisition costs | |||||||||||||||||
| Restructuring costs | |||||||||||||||||
| Operating income | |||||||||||||||||
| Other income (expense): | |||||||||||||||||
| Interest expense | ( | ( | ( | ||||||||||||||
| Other | |||||||||||||||||
| Other income (expenses) | ( | ||||||||||||||||
| Income before taxes | |||||||||||||||||
| Income tax expense | |||||||||||||||||
| Net earnings | |||||||||||||||||
| Less: net (loss) earnings attributable to noncontrolling interests | ( | ||||||||||||||||
Net earnings attributable to VPG stockholders | $ | $ | $ | ||||||||||||||
Basic earnings per share attributable to VPG stockholders | $ | $ | $ | ||||||||||||||
Diluted earnings per share attributable to VPG stockholders | $ | $ | $ | ||||||||||||||
Weighted average shares outstanding - basic | |||||||||||||||||
Weighted average shares outstanding - diluted | |||||||||||||||||
See accompanying notes.
F-6
VISHAY PRECISION GROUP, INC.
Consolidated Statements of Comprehensive Income (Loss)
(In thousands)
| Years ended December 31, | |||||||||||||||||
| 2024 | 2023 | 2022 | |||||||||||||||
| Net earnings | $ | $ | $ | ||||||||||||||
| Other comprehensive income (loss), net of tax: | |||||||||||||||||
| Foreign currency translation adjustment | ( | ( | |||||||||||||||
| Pension and other postretirement actuarial items | ( | ( | |||||||||||||||
| Other comprehensive income (loss), net of tax | ( | ( | |||||||||||||||
| Other comprehensive income (loss) | ( | ||||||||||||||||
| Less: comprehensive income (loss) attributable to noncontrolling interests | ( | ||||||||||||||||
| Comprehensive income (loss) attributable to VPG stockholders | $ | ( | $ | $ | |||||||||||||
See accompanying notes.
F-7
VISHAY PRECISION GROUP, INC.
Consolidated Statements of Equity
(In thousands, except share amounts)
| Common Stock | Class B Convertible Common Stock | Treasury Stock | Capital in Excess of Par Value | Retained Earnings | Accumulated Other Comprehensive Income (Loss) | Total VPG Inc. Stockholders' Equity | Noncontrolling Interests | Total Equity | |||||||||||||||||||||||||||||||||||||||||||||
| Balance at January 1, 2022 | $ | $ | $ | ( | $ | $ | $ | ( | $ | $ | ( | $ | |||||||||||||||||||||||||||||||||||||||||
Net earnings | — | — | — | — | — | ||||||||||||||||||||||||||||||||||||||||||||||||
| Other comprehensive loss | — | — | — | — | — | ( | ( | — | ( | ||||||||||||||||||||||||||||||||||||||||||||
Share-based compensation expense | — | — | — | — | — | — | |||||||||||||||||||||||||||||||||||||||||||||||
Restricted stock issuances ( | — | — | ( | — | — | ( | — | ( | |||||||||||||||||||||||||||||||||||||||||||||
Purchase of treasury stock ( | — | — | ( | — | — | — | ( | — | ( | ||||||||||||||||||||||||||||||||||||||||||||
Distributions to noncontrolling interests | — | — | — | — | — | — | — | ( | ( | ||||||||||||||||||||||||||||||||||||||||||||
| Balance at December 31, 2022 | $ | $ | $ | ( | $ | $ | $ | ( | $ | $ | ( | $ | |||||||||||||||||||||||||||||||||||||||||
| Net earnings | — | — | — | — | — | ||||||||||||||||||||||||||||||||||||||||||||||||
| Other comprehensive income | — | — | — | — | — | — | |||||||||||||||||||||||||||||||||||||||||||||||
| Share-based compensation expense | — | — | — | — | — | — | |||||||||||||||||||||||||||||||||||||||||||||||
Restricted stock issuances ( | — | — | ( | — | — | ( | — | ( | |||||||||||||||||||||||||||||||||||||||||||||
Purchase of treasury stock ( | — | — | ( | — | — | — | ( | — | ( | ||||||||||||||||||||||||||||||||||||||||||||
| Excise tax on net share repurchases | — | — | ( | — | — | — | ( | — | ( | ||||||||||||||||||||||||||||||||||||||||||||
| Distributions to noncontrolling interests | — | — | — | — | — | — | — | ( | ( | ||||||||||||||||||||||||||||||||||||||||||||
| Balance at December 31, 2023 | $ | $ | $ | ( | $ | $ | $ | ( | $ | $ | $ | ||||||||||||||||||||||||||||||||||||||||||
| Net earnings | — | — | — | — | — | ( | |||||||||||||||||||||||||||||||||||||||||||||||
| Other comprehensive loss | — | — | — | — | — | ( | ( | — | ( | ||||||||||||||||||||||||||||||||||||||||||||
| Share-based compensation expense | — | — | — | — | — | — | |||||||||||||||||||||||||||||||||||||||||||||||
Restricted stock issuances ( | — | — | ( | — | — | ( | — | ( | |||||||||||||||||||||||||||||||||||||||||||||
Purchase of treasury stock ( | — | — | ( | — | — | — | ( | — | ( | ||||||||||||||||||||||||||||||||||||||||||||
| Excise tax on net share repurchases | — | — | ( | — | — | — | ( | — | ( | ||||||||||||||||||||||||||||||||||||||||||||
| Distributions to noncontrolling interests | — | — | — | — | — | — | — | ( | ( | ||||||||||||||||||||||||||||||||||||||||||||
| Balance at December 31, 2024 | $ | $ | $ | ( | $ | $ | $ | ( | $ | $ | ( | $ | |||||||||||||||||||||||||||||||||||||||||
See accompanying notes.
F-8
VISHAY PRECISION GROUP, INC.
Consolidated Statements of Cash Flows
(In thousands)
| Years ended December 31, | |||||||||||||||||
| 2024 | 2023 | 2022 | |||||||||||||||
| Operating activities | |||||||||||||||||
| Net earnings | $ | $ | $ | ||||||||||||||
| Adjustments to reconcile net earnings to net cash provided by operating activities: | |||||||||||||||||
| Depreciation and amortization | |||||||||||||||||
| Loss (gain) on disposal of property and equipment | ( | ( | |||||||||||||||
| Gain on sale of short term investment | ( | ||||||||||||||||
| Reclassification of foreign currency translation adjustment related to disposal of subsidiary | |||||||||||||||||
| Share-based compensation expense | |||||||||||||||||
| Inventory write-offs for obsolescence | |||||||||||||||||
| Deferred income taxes | ( | ( | |||||||||||||||
| Foreign currency impacts and other items | ( | ( | |||||||||||||||
| Net changes in operating assets and liabilities, net of acquisition: | |||||||||||||||||
| Accounts receivable | ( | ||||||||||||||||
| Inventories | ( | ( | |||||||||||||||
| Prepaid expenses and other current assets | ( | ( | |||||||||||||||
| Trade accounts payable | ( | ( | |||||||||||||||
| Other current liabilities | ( | ||||||||||||||||
| Other non current assets and liabilities, net | ( | ( | |||||||||||||||
| Accrued pension and other postretirement costs, net | ( | ( | ( | ||||||||||||||
| Net cash provided by operating activities | |||||||||||||||||
| Investing activities | |||||||||||||||||
| Capital expenditures | ( | ( | ( | ||||||||||||||
| Proceeds from sale of property and equipment | |||||||||||||||||
| Purchase of short term investment | ( | ||||||||||||||||
| Proceeds from sale of short term investment | |||||||||||||||||
| Purchase of business | ( | ||||||||||||||||
| Net cash used in investing activities | ( | ( | ( | ||||||||||||||
| Financing activities | |||||||||||||||||
| Debt issuance costs | ( | ||||||||||||||||
| Payments on revolving facility | ( | ||||||||||||||||
| Purchase of treasury stock | ( | ( | ( | ||||||||||||||
| Distributions to noncontrolling interests | ( | ( | ( | ||||||||||||||
| Payment of excise tax on net share repurchases | ( | ||||||||||||||||
| Payments of employee taxes on certain share-based arrangements | ( | ( | ( | ||||||||||||||
| Net cash (used in) provided by financing activities | ( | ( | ( | ||||||||||||||
| Effect of exchange rate changes on cash and cash equivalents | ( | ( | |||||||||||||||
| (Decrease) increase in cash and cash equivalents | ( | ( | |||||||||||||||
| Cash and cash equivalents at beginning of year | |||||||||||||||||
| Cash and cash equivalents at end of year | $ | $ | $ | ||||||||||||||
| Supplemental disclosure of investing transactions: | |||||||||||||||||
| Capital expenditures accrued but not yet paid | $ | $ | $ | ||||||||||||||
| Supplemental disclosure of financing transactions: | |||||||||||||||||
| Excise tax on net share repurchases accrued but not yet paid | $ | $ | $ | ||||||||||||||
See accompanying notes.
F-9
Vishay Precision Group, Inc.
Notes to Consolidated Financial Statements
Note 1 – Background and Summary of Significant Accounting Policies
Background
Vishay Precision Group, Inc. (“VPG” or the “Company”) is a global leader in precision measurement and sensing technologies that help power the future by bridging the physical world with the digital one. Many of our specialized sensors, weighing solutions, and measurement systems are “designed-in” by our customers, and address growing applications across a diverse array of industries and markets. Our products are marketed under brand names that we believe are characterized as having a very high level of precision and quality, and we employ an operationally diversified structure to manage our businesses.
Principles of Consolidation
The consolidated financial statements include the accounts of the individual entities in which the Company maintained a controlling financial interest. For those subsidiaries in which the Company’s ownership is less than 100 percent, the outside stockholders’ interests are shown as noncontrolling interests in the accompanying consolidated balance sheets. All transactions, accounts, and profits between individual members comprising the Company have been eliminated in consolidation.
Use of Estimates
The preparation of financial statements in conformity with accounting principles generally accepted in the United States requires management to make estimates and assumptions that affect the amounts reported in the consolidated financial statements and accompanying notes. Actual results could differ significantly from those estimates.
Revenue Recognition
The Company derives substantially all of its revenue from product sales. The Company recognizes the vast majority of its sales at a point-in-time. It utilizes the core principle of recognizing revenue when the Company satisfies performance obligations as evidenced by the transfer of control of its products to the customer.
Such revenues are derived from purchase orders and/or contracts with customers. Each contract has the promise to transfer the control of the products, each of which is individually distinct and is considered the identified performance obligation. As part of the decision to enter into each contract, the Company evaluates the customer’s credit risk, but its contracts do not have any significant financing components, as payment is generally due net 30 to 60 days after delivery. In accordance with contract terms, revenue from the Company’s product sales is recognized at the time of product shipment from its facilities or delivery to the customer location, as determined by the agreed upon shipping terms.
Under the terms of some of its contracts, the Company may be required to perform certain installation services. These installation services are performed at the time of product delivery or at some point thereafter. The installation services do not significantly modify the product provided, and although the Company may be required contractually to provide these services, the installation services could be performed by a third party or the customer. Thus, these installation services are a distinct performance obligation. In most of the applicable contracts, this installation service element is immaterial in the context of the agreement. When the installation services are accounted for as a separate performance obligation, the Company allocates the transaction price to this element based on its relative standalone selling price.
Given the specialized nature of the Company's products, the Company generally does not allow product returns. Shipping and handling costs are recorded to Costs of product sold when control of the product has transferred to the customer. The Company offers standard product warranties. Warranty related costs continue to be recognized as expense when the products are sold. Sales, value added taxes and other taxes collected concurrent with revenue-producing activities are excluded from revenue. See Note 2 for further details on Revenues.
Research and Development Expenses
F-10
Income Taxes
The Company accounts for income taxes under the asset and liability method, which requires the recognition of deferred tax assets and liabilities for the expected future tax consequences of events that have been included in the financial statements. Under this method, deferred tax assets and liabilities are determined based on the difference between the financial statement and tax basis of assets and liabilities using enacted tax rates in effect for the year in which the differences are expected to reverse. The effect of a change in tax rates on deferred tax assets and liabilities is recognized in income tax expense in the period that includes the enactment date.
The Company records net deferred tax assets to the extent it believes such assets will "more likely than not" be realized. In making this determination, the Company considers all positive and negative evidence, including historic earnings, projected future income, and cost-effective tax-planning strategies. When the Company determines that its ability to realize deferred tax assets is not "more likely than not", the Company adjusts its deferred tax asset valuation allowance, which increases income tax expense.
The Company records uncertain tax positions on the basis of a two-step process in which the Company first determines whether it is "more likely than not" that the tax positions will be sustained based on the technical merits of the position and then measures those tax positions that meet the more-likely-than-not recognition threshold. The Company recognizes the largest amount of tax benefit that is greater than 50 percent likely to be realized upon ultimate settlement with the tax authority.
The Company recognizes interest and penalties related to unrecognized tax benefits within income tax expense in the accompanying consolidated statements of operations. Accrued interest and penalties are included within the related tax liability line in the consolidated balance sheets.
Cash and Cash Equivalents
Cash and cash equivalents include demand deposits and highly liquid investments with original maturities of three months or less when purchased. Highly liquid investments with maturities greater than three months are classified as short-term investments. There were no investments classified as short-term investments at December 31, 2024 or 2023.
Allowance for Credit Losses
Inventories
Inventories are stated at the lower of cost, determined by the first-in, first-out method, or market based on net realizable value. Inventories are adjusted for estimated excess and obsolescence and written down to net realizable value based upon estimates of future demand, technology developments, and market conditions.
Assets Held For Sale
The Company considers properties to be assets held for sale when (1) management commits to a plan to sell the property; (2) it is unlikely that the disposal plan will be significantly modified or discontinued; (3) the property is available for immediate sale in its present condition; (4) actions required to complete the sale of the property have been initiated; (5) sale of the property is probable and we expect the completed sale will occur within one year; and (6) the property is actively being marketed for sale at a price that is reasonable given our estimate of current market value. Upon designation of a property as an asset held for sale, we reclassify it to current assets as “Asset held for sale” and we record the property’s value at the lower of its carrying amount or its estimated fair value, less estimated costs to sell, and we cease depreciation.
Property and Equipment
F-11
Business Combinations
The Company allocates the purchase price of an acquired company, including when applicable, the fair value of contingent consideration between tangible and intangible assets acquired and liabilities assumed from the acquired businesses based on estimated fair values, with any residual of the purchase price recorded as goodwill. Estimating fair values requires significant judgments, estimates and assumptions including but not limited to: discount rates, future cash flows and the economic lives of trade names, technology, and customer relationships. These estimates are based on historical experience and information obtained from the management of the acquired companies, and are inherently uncertain.
Goodwill and Other Intangible Assets
Goodwill and indefinite-lived trademarks are tested for impairment at least annually, and whenever events or changes in circumstances occur indicating that it is "more likely than not" impairment may have been incurred. The Company has the option to first assess qualitative factors to determine whether it is "more likely than not" that the fair value of a reporting unit is less than its carrying value as a basis for determining if it is necessary to perform the quantitative goodwill impairment test. However, if the Company concludes otherwise, then it is required to perform the quantitative impairment test by calculating the fair value of the reporting unit and comparing it against its carrying value. If the fair value exceeds the carrying value, no further evaluation is required and no impairment loss is recognized. An impairment charge would be recognized to the extent the carrying value of goodwill exceeds the reporting unit fair value.
The indefinite-lived trade names are tested for impairment either by employing the qualitative approach outlined above, or by comparing the carrying value to the fair value based on current revenue projections of the related operations, under the relief from royalty method. Any excess carrying value over the applicable fair value is recognized as impairment. Any impairment would be recognized in the reporting period in which it has been identified.
The Company's requires goodwill and indefinite-lived asset annual impairment test is completed as of the first day of the fourth fiscal quarter each year. As described in Note 5 to the consolidated financial statements, the 2024, 2023 and 2022 annual impairment tests resulted in no impairment.
Impairment of Long-Lived Assets
The carrying value of long-lived assets held-and-used, other than goodwill and indefinite-lived intangible assets, is evaluated when events or changes in circumstances indicate the carrying value may not be recoverable. The carrying value of a long-lived asset group is considered impaired when the total projected undiscounted cash flows from such asset group are separately identifiable and are less than the carrying value. In that event, a loss is recognized based on the amount by which the carrying value exceeds the fair market value of the long-lived asset group. Fair market value is determined primarily using present value techniques based on projected cash flows from the asset group. Losses on long-lived assets held-for-sale, other than goodwill and indefinite-lived intangible assets, are determined in a similar manner, except that fair market values are reduced for disposal costs.
Foreign Currency Translation
The Company has significant operations outside of the United States. The Company's operations in Europe, Canada, and certain locations in Asia primarily generate and expend cash in local currencies, and accordingly, these subsidiaries utilize the local currency as their functional currency. The Company’s operations in Israel and certain locations in Asia primarily generate cash in U.S. dollars, and accordingly, these subsidiaries utilize the U.S. dollar as their functional currency.
For those subsidiaries where the local currency is the functional currency, assets and liabilities in the consolidated balance sheets have been translated at the rate of exchange as of the balance sheet date. Revenues and expenses are translated at the average exchange rate for the year. Translation adjustments do not impact the consolidated statements of operations and are reported as a separate component of accumulated other comprehensive loss within the statement of comprehensive income. Foreign currency transaction gains and losses are included in the results of operations.
F-12
For those foreign subsidiaries where the U.S. dollar is the functional currency, all foreign currency financial statement amounts are remeasured into U.S. dollars. Exchange gains and losses arising from remeasurement of foreign currency-denominated monetary assets and liabilities are included in the consolidated statements of operations.
Share-Based Compensation
Leases
The Company determines if an arrangement is or contains a lease at inception or modification of such agreement. The arrangement is or contains a lease if the contract conveys the right to control the use of the identified asset for a period in exchange for consideration.
Lease right of use assets and liabilities are recognized based on the present value of future minimum lease payments over the expected term at commencement date. As the implicit rate is not determinable in most of the Company's leases, the Company's incremental borrowing rate is used as the basis to determine the present value of future lease payments. The expected lease terms include options to extend or terminate. The period which is subject to an option to extend the lease is included in the lease term if it is reasonably certain that the option will be exercised. Some of these leases contain variable payment provisions that depend on an index or rate, initially measured using the index or rate at the lease commencement date and are therefore not included in our future minimum lease payments. Variable payments are expensed in the periods incurred. Lease expense for minimum lease payments is recognized on a straight-line basis over the expected lease term. The Company uses the practical expedients to exclude from balance sheet reporting leases with initial terms of 12 months or less and to exclude non-lease components from lease right of use assets and corresponding liabilities.
Commitments and Contingencies
Liabilities for loss contingencies arising from claims, assessments, litigation, fines, penalties, and other sources are recorded when it is probable that a liability has been incurred and the amount of the assessment and/or remediation can be reasonably estimated.
Recent Accounting Pronouncements
The Company evaluates the applicability and impact of all Accounting Standards Updates ("ASUs") issued by the Financial Accounting Standards Board ("FASB").
Recent accounting pronouncements
In November 2023, the FASB issued ASU 2023-07, Segment Reporting (Topic 280): Improvements to Reportable Segment Disclosures. The ASU expands public entities’ segment disclosures by requiring disclosure of significant segment expenses that are regularly reviewed by the chief operating decision maker ("CODM") and included within each reported measure of segment profit or loss, an amount and description of its composition for other segment items, and interim disclosures of a reportable segment’s profit or loss and assets. The ASU also allows, in addition to the measure that is most consistent with U.S. GAAP, the disclosure of additional measures of segment profit or loss that are used by the CODM in assessing segment performance and deciding how to allocate resources. The ASU is effective for the Company’s Annual Report on Form 10-K for the fiscal year ended December 31, 2024, and subsequent interim periods, with early adoption permitted. As part of this Annual Report, the Company adopted ASU 2023-07, which was applied retrospectively to all prior periods presented. Refer to Note 14 herein for further details regarding this adoption.
In December 2023, the FASB issued ASU No. 2023-09, Income Taxes (Topic 740): Improvements to Income Tax Disclosures. This ASU requires disclosure of specific categories in the rate reconciliation and additional information for reconciling items that meet a quantitative threshold. The amendment also includes other changes to improve the effectiveness of income tax disclosures, including further disaggregation of income taxes paid for individually significant jurisdictions. This ASU is effective for annual periods beginning after December 15, 2024. Early adoption is permitted. Adoption of this ASU should be applied on a prospective basis, although retrospective application is permitted. The Company is currently evaluating the impact of adopting this ASU on its consolidated financial statements and disclosures.
F-13
In November 2024, the Financial Accounting Standards Board (FASB) issued Accounting Standards Update (ASU) 2024-03, Income Statement—Reporting Comprehensive Income—Expense Disaggregation Disclosures (Subtopic 220-40), Disaggregation of Income Statement Expenses. This update aims to enhance the transparency of financial reporting by requiring public business entities (PBEs) to provide disaggregated disclosure of certain income statement expense captions into specified categories in disclosures within the footnotes to the financial statements. The ASU is effective for annual fiscal years beginning after December 15, 2026, and interim periods within fiscal years beginning after December 15, 2027. Early adoption is permitted. Adoption of this ASU should be applied on a prospective basis, although retrospective application is permitted. The Company is currently evaluating the impact of adopting this ASU on its consolidated financial statements and disclosures.
Note 2 – Revenues
The following table disaggregates net revenue by geographic region from contracts with customers based on net revenues generated by subsidiaries within that geographic location (in thousands):
| Year to date December 31, 2024 | |||||||||||||||||||||||
| Sensors | Weighing Solutions | Measurement Systems | Total | ||||||||||||||||||||
| United States | $ | $ | $ | $ | |||||||||||||||||||
| Europe | |||||||||||||||||||||||
| Israel | |||||||||||||||||||||||
| Asia | |||||||||||||||||||||||
| Canada | |||||||||||||||||||||||
| $ | $ | $ | $ | ||||||||||||||||||||
| Year to date December 31, 2023 | |||||||||||||||||||||||
| Sensors | Weighing Solutions | Measurement Systems | Total | ||||||||||||||||||||
| United States | $ | $ | $ | $ | |||||||||||||||||||
| Europe | |||||||||||||||||||||||
| Israel | |||||||||||||||||||||||
| Asia | |||||||||||||||||||||||
| Canada | |||||||||||||||||||||||
| $ | $ | $ | $ | ||||||||||||||||||||
| Year to date December 31, 2022 | |||||||||||||||||||||||
| Sensors | Weighing Solutions | Measurement Systems | Total | ||||||||||||||||||||
| United States | $ | $ | $ | $ | |||||||||||||||||||
| Europe | |||||||||||||||||||||||
| Israel | |||||||||||||||||||||||
| Asia | |||||||||||||||||||||||
| Canada | |||||||||||||||||||||||
| $ | $ | $ | $ | ||||||||||||||||||||
The following table disaggregates net revenue by market sector (in thousands):
F-14
Note 2 – Revenues
| Years Ended December 31, | ||||||||||||||||||||
| 2024 | 2023 | 2022 | ||||||||||||||||||
| Test & Measurement | $ | $ | $ | |||||||||||||||||
| Avionics, Military & Space | ||||||||||||||||||||
| Transportation | ||||||||||||||||||||
| Other Markets | ||||||||||||||||||||
| Industrial Weighing | ||||||||||||||||||||
| General Industrial | ||||||||||||||||||||
| Steel | ||||||||||||||||||||
| $ | $ | $ | ||||||||||||||||||
Contract Assets & Liabilities
Contract assets are established when revenues are recognized prior to a contractual payment due from the customer. When a payment becomes due based on the contract terms, the Company will reduce the contract asset and record a receivable. Contract liabilities are deferred revenues that are recorded when cash payments are received or due in advance of our performance obligations. Our payment terms vary by the type and location of the products offered. The term between invoicing and when payment is due is not significant.
The outstanding contract assets and liability accounts were as follows (in thousands):
| Contract Asset | Contract Liability | ||||||||||
| Unbilled Revenue | Accrued Customer Advances | ||||||||||
| December 31, 2023 | $ | $ | |||||||||
| December 31, 2024 | $ | $ | |||||||||
| (Decrease) Increase | $ | $ | ( | ||||||||
Note 3 – Acquisition Activity
Nokra
On September 30, 2024, the Company completed the acquisition of Nokra, a German-based, privately held maker of precision measuring and testing equipment for manufacturing, for a purchase price of $4.4 million.
Nokra’s laser-based measuring systems expand our existing measurement and inspection solutions for steel and aluminum rolling mills, as well as for the metal processing industry. Nokra’s laser-based measurement gauge systems are used to precisely measure the thickness, flatness, contour, width or 3D profile of various metals depending on the application , in both inline and offline production. The Company used cash on hand to fund the purchase under the purchase agreement. Nokra reports into the Company's Measurement Systems segment.
The following table summarizes the provisional fair values assigned to the assets and liabilities of Nokra as of September 30, 2024 (in thousands):
F-15
Note 3 – Acquisition Activity (continued)
| September 30, 2024 | |||||
| Working capital | |||||
| Property and equipment | |||||
| Deferred income tax liability | ( | ||||
| Intangible assets: | |||||
| Acquired technology | |||||
| Customer backlog | |||||
| Total intangible assets | |||||
| Fair value of acquired identifiable assets | |||||
| Purchase price | $ | ||||
| Goodwill | $ | ||||
The Company utilizes certain valuations and studies to determine the fair value of the tangible and intangible assets acquired. The estimated weighted average useful life for the acquired technology is 10 years and for customer backlog is 1 year. None of the goodwill associated with Nokra is deductible for income tax purposes. The Company recorded acquisition costs associated with this transaction of $0.1 million in the fourth quarter of 2024, which included legal fees.
Note 4- Assets held for sale
During the fourth quarter of 2024, the Company committed to a plan to sell its manufacturing facility located at Kent, Washington (Weighing Solutions Segment) as part of the Company’s ongoing strategy to focus on core operations and optimize its asset base utilization.
The Company determined that the criteria for classifying the asset as held for sale as of December 31, 2024, have been met. Accordingly, the carrying value of the asset is presented separately as a current asset in the consolidated balance sheet.
The Company expects to complete the sale within the next 12 months at a price which is higher than the carrying value of the asset.
A summary of the assets held for sale is included in the table below as of December 31, 2024:
| Location | Asset Category | Cost | Accumulated Depreciation | Net Carrying Value | |||||||||||||||||||
| Kent, Washington | Land | $ | $ | $ | |||||||||||||||||||
| Building & Improvements | $ | $ | $ | ||||||||||||||||||||
| $ | $ | $ | |||||||||||||||||||||
Note 5 – Goodwill and Other Intangible Assets
The Company has four reporting units to which goodwill was allocated: steel, on-board weighing, DSI, and DTS. In 2024 the Company performed a quantitative impairment test for all its reporting units. In estimating the fair value of our reporting units the Company used the income approach. The income approach to valuation requires management to make significant estimates and assumptions related to future revenues, profitability, working capital requirements and selection of discount rate and long term growth rate. Changes in these estimates and assumptions could have a significant impact on the fair value of the reporting units. If the fair value exceeds the carrying value, no further evaluation is required and no impairment loss is recognized. An impairment charge would be recognized to the extent the carrying value of goodwill exceeds the reporting unit fair value.
F-16
Note 5 – Goodwill and Other Intangible Assets (continued)
The Company's requires goodwill and indefinite-lived asset annual impairment test is completed as of the first day of the fourth fiscal quarter each year. In 2024, 2023 and 2022, the results of the quantitative impairment test for all reporting units indicated that the fair value of the reporting units exceeded their carrying values, and therefore no impairment was recognized.
The change in the carrying value of goodwill by segment is as follows (in thousands):
| Total | Measurement Systems | Weighing Solutions | |||||||||||||||||||||||||||||||||||||||
| Steel | Nokra | DSI | DTS | On-board Weighing | |||||||||||||||||||||||||||||||||||||
| Balance at January 1, 2023 | |||||||||||||||||||||||||||||||||||||||||
| Foreign currency translation adjustment | |||||||||||||||||||||||||||||||||||||||||
| Balance at December 31, 2023 | |||||||||||||||||||||||||||||||||||||||||
| Goodwill acquired | |||||||||||||||||||||||||||||||||||||||||
| Foreign currency translation adjustment | ( | ( | ( | ( | |||||||||||||||||||||||||||||||||||||
| Balance at December 31, 2024 | |||||||||||||||||||||||||||||||||||||||||
Intangible assets were as follows (in thousands):
| December 31, | |||||||||||
| 2024 | 2023 | ||||||||||
| Intangible assets subject to amortization | |||||||||||
| (Definite-lived): | |||||||||||
| Patents and acquired technology | $ | $ | |||||||||
| Customer relationships | |||||||||||
| Trade names | |||||||||||
| Non-competition agreements | |||||||||||
| Accumulated amortization: | |||||||||||
| Patents and acquired technology | ( | ( | |||||||||
| Customer relationships | ( | ( | |||||||||
| Trade names | ( | ( | |||||||||
| Non-competition agreements | ( | ( | |||||||||
| ( | ( | ||||||||||
| Net intangible assets subject to amortization | $ | $ | |||||||||
| Intangible assets not subject to amortization | |||||||||||
| (Indefinite-lived): | |||||||||||
| Trade names | |||||||||||
| $ | $ | ||||||||||
Certain intangible assets are subject to foreign currency translation.
Amortization expense was $3.8 million, $3.8 million, and $3.9 million, for the years ended December 31, 2024, 2023, and 2022, respectively.
F-17
Note 5 – Goodwill and Other Intangible Assets (continued)
Estimated annual amortization expense for each of the next five years is as follows (in thousands):
| 2025 | $ | ||||
| 2026 | |||||
| 2027 | |||||
| 2028 | |||||
| 2029 | |||||
Note 6 - Restructuring Costs
Restructuring costs reflect the cost reduction programs implemented by the Company. Restructuring costs are expensed during the period in which the Company determines it will incur those costs and all requirements for accrual are met. Because these costs are recorded based upon estimates, actual expenditures for the restructuring activities may differ from the initially recorded costs. If the initial estimates are too low or too high, the Company could be required to either record additional expense in future periods or to reverse part of the previously recorded charges.
The Company recorded restructuring costs of $1.1 million, $1.6 million, and $1.5 million during the years ended December 31, 2024, 2023, and 2022, respectively. The restructuring costs were comprised primarily of employee termination costs, including severance and statutory retirement allowances, and were incurred in connection with various cost reduction programs.
The following table summarizes the activity to date related to these programs in the accrued restructuring liability, which is comprised of the activity associated primarily with the employee termination costs. The accrued restructuring liability balance as of December 31, 2024 and 2023, respectively, is included in other accrued expenses in the accompanying consolidated balance sheets (in thousands):
| December 31, | |||||||||||||||||
| 2024 | 2023 | ||||||||||||||||
| Balance at beginning of year | $ | $ | |||||||||||||||
| Restructuring charges | |||||||||||||||||
| Cash payments | ( | ( | |||||||||||||||
| Foreign currency translation | ( | ||||||||||||||||
| Balance at end of year | $ | $ | |||||||||||||||
Note 7 – Income Taxes
For financial reporting purposes, income before taxes includes the following components (in thousands):
| Years ended December 31, | |||||||||||||||||
| 2024 | 2023 | 2022 | |||||||||||||||
| Domestic | $ | $ | ( | $ | ( | ||||||||||||
| Foreign | |||||||||||||||||
| $ | $ | $ | |||||||||||||||
F-18
Note 7 – Income Taxes (continued)
The expense (benefit) for income taxes is comprised of (in thousands):
| Years ended December 31, | |||||||||||||||||
| 2024 | 2023 | 2022 | |||||||||||||||
| Current: | |||||||||||||||||
| Federal | $ | $ | $ | ||||||||||||||
| State and local | |||||||||||||||||
| Foreign | |||||||||||||||||
| Deferred: | |||||||||||||||||
| Federal | ( | ||||||||||||||||
| State and local | ( | ( | |||||||||||||||
| Foreign | |||||||||||||||||
| ( | ( | ||||||||||||||||
| Total income tax expense | $ | $ | $ | ||||||||||||||
A reconciliation of income tax expense (benefit) at the U.S. federal statutory income tax rate to the actual income tax provision is as follows (in thousands):
| Years ended December 31, | |||||||||||||||||
| 2024 | 2023 | 2022 | |||||||||||||||
| Tax at statutory rate | $ | $ | $ | ||||||||||||||
| State income taxes, net of U.S. federal tax benefit | ( | ||||||||||||||||
| U.S. GILTI tax, net of foreign tax credits | |||||||||||||||||
| Effect of foreign operations | |||||||||||||||||
| Residual U.S. tax on foreign earnings | |||||||||||||||||
| Change in valuation allowance | ( | ||||||||||||||||
| Change in unrecognized tax benefits, net | ( | ||||||||||||||||
| Specialty tax credits | ( | ( | ( | ||||||||||||||
| Statutory rate changes | |||||||||||||||||
| Effect of foreign exchange | ( | ||||||||||||||||
| Other | ( | ( | |||||||||||||||
| Total income tax expense | $ | $ | $ | ||||||||||||||
In 2024, the Company recognized deferred tax benefits of $0.2 million on net operating loss carryforwards generated in certain foreign jurisdictions, which is included in deferred tax expense (benefit) above.
The 2017 Tax Cuts and Jobs Act subjects a U.S. shareholder to tax on Global Intangible Low-Taxed Income (“GILTI”) earned by certain foreign subsidiaries. The FASB Staff Q&A, Topic 740, No. 5, Accounting for Global Intangible Low-Taxed Income, states that an entity can make an accounting policy election to either recognize deferred taxes for temporary basis differences expected to reverse as GILTI in the future years or provide for tax expense related to GILTI in the year the tax is incurred. The Company has elected to recognize tax expense related to GILTI in the year the tax is incurred.
The Company recognized approximately $8.1 million and $22.5 million of GILTI for the years ended December 31, 2024 and 2023, respectively. The U.S. tax on GILTI, net of foreign tax credits and research credits, was less than $0.1
Deferred income taxes represent the net tax effects of temporary differences between the carrying amounts of assets and liabilities for financial reporting purposes and the amounts for income tax purposes.
Significant components of the Company’s deferred tax assets and liabilities are as follows (in thousands):
F-19
Note 7 – Income Taxes (continued)
| December 31, | |||||||||||
| 2024 | 2023 | ||||||||||
| Deferred tax assets: | |||||||||||
| Pension and other postretirement costs | $ | $ | |||||||||
| Inventories | |||||||||||
| Net operating/capital loss and interest carryforwards | |||||||||||
| Tax credit carryforwards | |||||||||||
| Deferred compensation | |||||||||||
| Research and development costs | |||||||||||
| Other accruals and reserves | |||||||||||
| Total gross deferred tax assets | |||||||||||
| Less: valuation allowance | ( | ( | |||||||||
| Deferred tax liabilities: | |||||||||||
| Tax over book depreciation | ( | ( | |||||||||
| Investment in subsidiary | ( | ( | |||||||||
| Intangible assets, including tax deductible goodwill | ( | ( | |||||||||
| Total gross deferred tax liabilities | ( | ( | |||||||||
| Net deferred tax assets | $ | $ | |||||||||
In 2015, the Company established a valuation allowance with respect to substantially all of its U.S. deferred tax assets due to uncertainty regarding the realization of these assets. Throughout 2023 and 2024, the Company reassessed its ability to realize its U.S. and other deferred tax assets by considering both positive and negative evidence regarding realization. The most significant negative evidence is continuing cumulative operating losses in the U.S. The impact of the acquisitions of Stress-Tek, Pacific Instruments, DSI and DTS was also considered in determining the realization of the U.S. deferred tax assets. Other aspects, such as operating results, additional interest expense and additional tax deductions related to the Stress-Tek acquisition, were also considered. The Company also considered positive evidence such as tax planning strategies and the projected benefits of our restructuring efforts. However, there was insufficient positive evidence to overcome the negative evidence.
On September 30, 2024, the Company acquired Nokra. Nokra's opening balance sheet included a $1.0 million of gross deferred tax assets, and a $1.2 million of indefinite-lived liabilities as a result of the purchase price allocation. The acquisition contributed to a less than $0.1 million net increase in valuation allowance and deferred tax expense for the Company in 2024. The Company has one year from the date of acquisition to finalize the purchase accounting for Nokra.
Overall, the cumulative losses and the acquisition impacts still indicate that realization of our U.S. deferred tax assets remains uncertain such that the Company cannot conclude that it is "more likely than not" that the deferred tax assets will be recoverable. We will continue to monitor the realization of U.S. deferred tax assets and reduce the valuation allowance if, and when, sufficient positive evidence of realization exists. At December 31, 2024 and 2023, the valuation allowance on U.S. deferred tax assets was approximately $13.3 million and $10.9 million, respectively. The net change in this valuation allowance was approximately $2.4 million, of which approximately $0.6 million related to state valuation allowances.
The change in valuation allowance related to state taxes exclusive of rate changes was $0.6 million expense and $0.5 million benefit for the years ended December 31, 2024 and 2023, respectively.
The Company also has valuation allowances of $2.1 million and $2.2 million at December 31, 2024 and 2023, respectively, with respect to certain foreign net operating loss and capital loss carryforwards.
Significant valuation allowances are as follows (in thousands):
F-20
Note 7 – Income Taxes (continued)
| December 31, | |||||||||||
| Jurisdiction | 2024 | 2023 | |||||||||
| U.S. federal | $ | $ | |||||||||
| U.S. state (net of U.S. federal tax benefit) | |||||||||||
| Israel - capital losses | |||||||||||
The following table summarizes significant net operating losses, capital losses and credit carryforwards as of December 31, 2024 (in thousands):
| December 31, | |||||||||||
| Jurisdiction | 2024 | Expiring | |||||||||
| U.S. federal net operating losses | $ | No expiration | |||||||||
| U.S. federal interest expense carryover | No expiration | ||||||||||
| U.S. foreign tax credit | 2028-2034 | ||||||||||
| U.S. state net operating losses | 2024-2044 | ||||||||||
| Israel capital losses | No expiration | ||||||||||
Utilization of U.S. federal net operating losses is taken into account before the GILTI deduction allowable by IRC Section 250.
Undistributed earnings of the Company’s foreign subsidiaries were approximately $300.5 million at December 31, 2024 compared to $277.6 million at December 31, 2023. As of December 31, 2024, the Company had provided for a deferred tax liability of approximately $2.3 million of withholding tax associated with $25.3 million of unremitted, non-permanently reinvested earnings. Substantially all of the remaining undistributed earnings are considered to be indefinitely reinvested and accordingly no provision has been made with respect to these earnings for incremental foreign income taxes, state income taxes or foreign withholding taxes. If those earnings were distributed to the U.S., the Company could be subject to incremental foreign income taxes, state income taxes, and withholding taxes. Determination of the amount of unrecognized deferred tax liability is not practicable because of the uncertainty regarding the timing of any such distribution and the impact on existing valuation allowances. In addition to the $2.3 million, additional withholding taxes of approximately $32.0 million are estimated to be payable upon distribution of the remaining previously unremitted earnings as of December 31, 2024.
Net income taxes paid were $14.5 million, $10.9 million and $10.8 million for the years ended December 31, 2024, 2023 and 2022, respectively.
The Company and its subsidiaries are subject to income taxes imposed by the U.S., various states, and the foreign jurisdictions in which we operate. Each jurisdiction establishes rules that set forth the years which are subject to examination by its tax authorities. While the Company believes the tax positions taken on its tax returns for each jurisdiction are supportable, they may still be challenged by the jurisdiction's tax authorities. In anticipation of such challenges, the Company has established reserves for tax-related uncertainties. These liabilities are based on the Company’s best estimate of the potential tax exposures in each respective jurisdiction. It may take a number of years for a final tax liability in a jurisdiction to be determined, particularly in the event of an audit. If an uncertain matter is determined favorably, there could be a reduction in the Company’s tax expense. An unfavorable determination could increase tax expense and could require a cash payment, including interest and penalties.
F-21
Note 7 – Income Taxes (continued)
The following table summarizes changes in the Company's gross liabilities, excluding interest and penalties, associated with unrecognized tax benefits (in thousands):
| December 31, | |||||||||||||||||
| 2024 | 2023 | 2022 | |||||||||||||||
| Balance at beginning of year | $ | $ | $ | ||||||||||||||
| Addition based on tax positions related to current year | |||||||||||||||||
| Addition based on tax positions related to prior years | |||||||||||||||||
| Reduction based on tax positions related to prior years | ( | ||||||||||||||||
| Currency translation adjustments | ( | ( | ( | ||||||||||||||
| Reduction for settled tax examinations | ( | ||||||||||||||||
| Reduction for payments made | ( | ||||||||||||||||
| Reduction for lapses of statute of limitations | ( | ||||||||||||||||
| Balance at end of year | $ | $ | $ | ||||||||||||||
The Company recognizes accrued interest and penalties related to unrecognized tax benefits as a component of income tax expense. Related to the unrecognized tax benefits noted above, for the years ended December 31, 2024, 2023 and 2022, the Company accrued total penalties and interest of 0.0 million, $0.0 million and $(0.2 ) million, respectively. As of December 31, 2024, 2023 and 2022, accrued penalties and interest were $0.1 million, $0.0 million and $0.0 million, respectively.
Included in the balance of unrecognized tax benefits as of December 31, 2024, 2023, and 2022 is $0.8 million, $0.8 million, and $0.4 million, respectively, of tax benefits that, if recognized, would impact the effective tax rate. The Company believes that it is reasonably possible that an increase in unrecognized tax benefits related to foreign exposures of between $0.1 million and $0.2 million may be necessary in 2025. Furthermore, as of December 31, 2024, the Company does not anticipate that any of its current unrecognized tax benefits will reverse within the next calendar year due to the expiration of the statute of limitations.
The Company and its subsidiaries file U.S. federal income tax returns, as well as income tax returns in various state, local, and foreign jurisdictions. The Company files federal, state, and local income tax returns on a combined, unitary, or stand-alone basis. The statute of limitations in those jurisdictions generally ranges from 3 to 4 years. Additionally, the Company's foreign subsidiaries file income tax returns in the countries in which they have operations and the statutes of limitations in those jurisdictions generally range from 3 to 10 years.
During the first quarter of 2024, a tax examination began of one its subsidiaries in Israel covering the years 2019-2022.
During the second quarter of 2024, the Company concluded a tax examination in France for one of its subsidiaries covering the years 2021 and 2022, which resulted in no change in tax.
During the fourth quarter of 2024, a tax examination began in Germany of three of the Company's subsidiaries. The Company also concluded a tax examination in Taiwan for one of its subsidiaries covering the year 2022, which resulted in no change in tax.
The Company is subject to ongoing income tax audits, administrative appeals and judicial proceedings in India spanning a number of years.
F-22
Note 8 – Long-Term Debt
Long-term debt consists of the following (in thousands):
| December 31, | |||||||||||
| 2024 | 2023 | ||||||||||
| Credit Agreement - Revolving Facility | $ | $ | |||||||||
| Deferred financing costs | ( | ( | |||||||||
| Long-term debt | $ | $ | |||||||||
2024 Credit Agreement
On August 15, 2024, the Company entered into a Fourth Amended and Restated Credit Agreement (the “2024 Credit Agreement”) among the Company, the lenders party thereto, JPMorgan Chase Bank, N.A., Wells Fargo Bank, N.A. and HSBC as joint lead arrangers and joint bookrunner, and JPMorgan Chase Bank, N.A., as agent for such lenders, pursuant to which the existing Credit Agreement, was amended and restated to, among other things, extend the maturity date from March 20, 2025 to August 15, 2029 and adjust the interest rate and commitment fee. The 2024 Credit Agreement provides for a multi-currency, secured credit facility (the “2024 Revolving Facility”) in an aggregate principal amount of $75.0 million, with a sublimit of $10 million which can be used for letters of credit for the account of the Company or its subsidiaries that are parties to the 2024 Credit Agreement, the proceeds of which may be used for working capital and general corporate purposes, and a portion of which were used to refinance the existing credit facility. The aggregate principal amount of the 2024 Revolving Facility may be increased by a maximum of $25.0 million upon the request of the Company, subject to the terms of the 2024 Credit Agreement. The Company may elect to make loans under the 2024 Revolving Facility in US Dollars, Euros, Canadian Dollars, Sterling, Japanese Yen or such other freely convertible foreign currency.
Amounts borrowed under the 2024 Revolving Facility accrue interest in an amount equal to a floating rate plus a specified margin. Such floating rates are (i) for loans denominated in US Dollars, at the Company’s option, either (a) the greatest of: the Agent’s prime rate, the Federal Funds rate, or a 0.01 floor (the “US Base Rate”), or (b) the SOFR, (ii) for loans denominated in Canadian Dollars, at the Company’s option, either (x) the greatest of: the PRIMCAN Index rate, the average 30 days rate for loans accruing interest based on the Canadian Overnight Repo Rate Average (“CORRA”) (the “Canadian Base Rate”), or (y) CORRA, (iii) for loans denominated in Pounds Sterling, the Sterling Overnight Index Average (“SONIA”), (iv) for loans denominated in Euros, the Euro Interbank Offered Rate (“EURIBOR"), and (v) for loans denominated in Japanese Yen, the Tokyo Interbank Offered Rate (“TIBOR”). The specified interest margin for US Base Rate Loans and Canadian Base Rate Loans is 0.25 1.75 % to 3.00 % per annum. The Company is required to pay a quarterly fee of 0.20 % per annum to 0.40 % per annum on the unused portion of the 2024 Revolving Facility, which is also determined based on the Company’s leverage ratio. Additional customary fees apply with respect to letters of credit.
The obligations of the Company under the 2024 Credit Agreement are secured by pledges of stock in certain domestic and foreign subsidiaries, as well as guarantees by substantially all of the Company’s domestic subsidiaries. The obligations of the Company and the guarantors under the 2024 Credit Agreement are secured by substantially all the assets (excluding real estate) of the Company and such guarantors. The 2024 Credit Agreement restricts the Company from paying cash dividends and requires the Company to comply with other customary covenants, representations, and warranties, including the maintenance of specific financial ratios. The financial maintenance covenants include an interest coverage ratio and a leverage ratio. The Company was in compliance with its financial maintenance covenants at December 31, 2024. If the Company is not in compliance with any of these covenant restrictions, the credit facility could be terminated by the lenders, and all amounts outstanding pursuant to the credit facility could become immediately payable.
Other Lines of Credit
In addition to the 2024 Revolving Facility discussed above, certain subsidiaries of the Company had committed short-term lines of credit with a foreign bank aggregating approximately $5.0 million and $5.0 million at December 31, 2024 and 2023, respectively. The Company had outstanding letters of credit under these short-term lines of credit of $2.4 million and $2.4 million at December 31, 2024 and 2023, respectively.
F-23
Note 8 – Long-Term Debt (continued)
Aggregate annual maturities of long-term debt are as follows (in thousands):
| 2025 | $ | ||||
| 2026 | |||||
| 2027 | |||||
| 2028 | |||||
| 2029 | |||||
Interest paid on third-party debt was $2.5 million, $4.0 million, and $2.3 million during the years ended December 31, 2024, 2023, and 2022, respectively.
Note 9 – Stockholders’ Equity
The Company’s Class B convertible common stock carries ten votes per share. The Company common stock carries one vote per share. Class B shares are transferable only to certain permitted transferees. Class B shares are convertible on a one -for-one basis at any time into shares of common stock. Transfers of Class B shares other than to permitted transferees will result in the automatic conversion of the Class B shares into common stock.
The Board of Directors may only declare dividends or other distributions with respect to the common stock or the Class B convertible common stock if it grants such dividends or distributions in the same amount per share with respect to the other class of stock. As discussed in Note 7, the Company is restricted from paying cash dividends. Stock dividends or distributions, on any class of stock, are payable only in shares of stock of that class. Shares of either common stock or Class B convertible common stock cannot be split, divided, or combined unless the other is also split, divided, or combined equally.
On August 8, 2022, the Board of Directors of the Company authorized the repurchase of up to 600,000 shares of the Company’s outstanding common stock (the “Stock Repurchase Plan”). The Stock Repurchase Plan was originally set to expire on August 11, 2023, and the Board authorized purchases thereunder to be made through an issuer repurchase plan adopted under Rule 10b5-1 of the Securities Exchange Act of 1934, as amended (the “Exchange Act”), open market purchases or private transactions, in accordance with the applicable federal securities laws, including Rule 10b-18 under the Exchange Act. On August 8, 2023, the Company announced that its Board of Directors extended the term of the previously approved stock repurchase plan to August 9, 2024. The Stock Repurchase Plan expired in accordance with its terms on August 9, 2024.
From August 8, 2022 to August 9, 2024, the Company had repurchased an aggregate of 518,328 shares of its common stock under the Stock Repurchase Plan.
The Board of Directors is authorized, without further stockholder approval, to issue from time to time up to an aggregate of 1,000,000 shares of preferred stock in one or more series. The Board of Directors may fix or alter the designation, preferences, rights and any qualification, limitations, restrictions of the shares of any series, including the dividend rights, dividend rates, conversion rights, voting rights, redemption terms and prices, liquidation preferences and the number of shares constituting any series. No shares of the Company’s preferred stock are currently outstanding.
F-24
Note 9 – Stockholders’ Equity (continued)
Other Comprehensive Income (Loss)
The cumulative balance of each component of other comprehensive income (loss) and the income tax effects allocated to each component are as follows (in thousands):
| Beginning Balance | Before-Tax Amount | Tax Effect | Net-of-Tax Amount | Ending Balance | |||||||||||||||||||||||||
| December 31, 2022 | |||||||||||||||||||||||||||||
Pension and other postretirement actuarial items | $ | ( | $ | $ | ( | $ | $ | ||||||||||||||||||||||
Reclassification adjustment for recognition of actuarial items | — | ( | |||||||||||||||||||||||||||
Foreign currency translation adjustment | $ | ( | $ | ( | $ | ( | $ | ( | $ | ( | |||||||||||||||||||
Reclassification adjustment for foreign currency translation | — | ||||||||||||||||||||||||||||
| $ | ( | $ | ( | $ | ( | $ | ( | $ | ( | ||||||||||||||||||||
| December 31, 2023 | |||||||||||||||||||||||||||||
Pension and other postretirement actuarial items | $ | $ | ( | $ | ( | $ | ( | $ | |||||||||||||||||||||
Reclassification adjustment for recognition of actuarial items | — | ( | |||||||||||||||||||||||||||
Foreign currency translation adjustment | ( | ( | ( | ||||||||||||||||||||||||||
| $ | ( | $ | $ | ( | $ | $ | ( | ||||||||||||||||||||||
| December 31, 2024 | |||||||||||||||||||||||||||||
Pension and other postretirement actuarial items | $ | $ | ( | $ | $ | ( | $ | ||||||||||||||||||||||
Reclassification adjustment for recognition of actuarial items | — | ( | ( | ( | |||||||||||||||||||||||||
Foreign currency translation adjustment | ( | ( | ( | ( | |||||||||||||||||||||||||
| $ | ( | $ | ( | $ | $ | ( | $ | ( | |||||||||||||||||||||
In 2022, Reclassification of foreign currency translation adjustment for gain on liquidation of a subsidiary is included in other income (expense) other (See Note 15). Reclassifications of pension and other postretirement actuarial items out of accumulated other comprehensive income (loss) are included in the computation of net periodic benefit cost (See Note 9).
Note 10 – Pensions and Other Postretirement Benefits
Defined Benefit Plans
Employees of the Company participate in various defined benefit pension and other postretirement benefit plans.
U.S. Pension Plan
The Vishay Precision Group Non-Qualified Retirement Plan, like all nonqualified plans, is considered to be unfunded. The Company maintains a nonqualified trust, referred to as a “rabbi” trust, to fund benefits under this plan. Rabbi trust assets are subject to creditor claims under certain conditions and are not the property of employees. Therefore, they are accounted for as other noncurrent assets within the consolidated balance sheets. The assets held in the rabbi trust are invested in money market funds and company-owned life insurance policies. The consolidated balance sheets include assets held in trust related to the nonqualified pension plan of $1.6 million at December 31, 2024 and $1.6 million at December 31, 2023, and the related liabilities of $2.1 million and $2.1 million at December 31, 2024 and 2023, respectively.
The Vishay Precision Group Non-Qualified Retirement Plan is frozen. Accordingly, no new employees may participate in the plan, no further participant contributions are permitted, and no further benefits accrue. Benefits accumulated prior to the freezing of the U.S. pension plan will be paid to employees upon retirement, and the Company will likely need to make additional cash contributions to the rabbi trust to fund this accumulated benefit obligation.
Non-U.S. Pension Plans
The Company provides pension and similar benefits to employees of certain non-U.S. subsidiaries consistent with local practices. Pension benefits earned are generally based on years of service and compensation during active employment.
F-25
Note10 – Pensions and Other Postretirement Benefits (continued)
The following table sets forth a reconciliation of the benefit obligation, plan assets, and funded status related to pension plans (in thousands):
| December 31, 2024 | December 31, 2023 | ||||||||||||||||||||||
| U.S. Plans | Non-U.S. Plans | U.S. Plans | Non-U.S. Plans | ||||||||||||||||||||
| Change in benefit obligation: | |||||||||||||||||||||||
| Benefit obligation at beginning of year | $ | $ | $ | $ | |||||||||||||||||||
| Service cost (adjusted for actual employee contributions) | |||||||||||||||||||||||
| Interest cost | |||||||||||||||||||||||
| Actuarial loss/(gains) | ( | ( | |||||||||||||||||||||
| Benefits paid | ( | ( | ( | ( | |||||||||||||||||||
| Curtailments and settlements | ( | ( | |||||||||||||||||||||
| Currency translation | ( | ||||||||||||||||||||||
| Benefit obligation at end of year | $ | $ | $ | $ | |||||||||||||||||||
| Change in plan assets: | |||||||||||||||||||||||
| Fair value of plan assets at beginning of year | $ | $ | $ | $ | |||||||||||||||||||
| Actual return on plan assets | ( | ||||||||||||||||||||||
| Company contributions | |||||||||||||||||||||||
| Benefits paid | ( | ( | |||||||||||||||||||||
| Currency translation | ( | ||||||||||||||||||||||
| Fair value of plan assets at end of year | $ | $ | $ | $ | |||||||||||||||||||
| Funded status at end of year | $ | ( | $ | $ | ( | $ | |||||||||||||||||
Actuarial gains incurred in 2024 related to our U.S. and non-U.S. plans are primarily the result of the decrease discount rate assumptions used to estimate the benefit obligation as of December 31, 2024 compared to December 31, 2023. Actuarial gains incurred in 2023 related to our U.S. and non-U.S. plans are primarily the result of an increase in the discount rate assumptions used to estimate the benefit obligations as of December 31, 2023 compared to December 31, 2022.
Amounts recognized in the consolidated balance sheets consist of the following pre-tax amounts (in thousands):
| December 31, 2024 | December 31, 2023 | ||||||||||||||||||||||
| U.S. Plans | Non-U.S. Plans | U.S. Plans | Non-U.S. Plans | ||||||||||||||||||||
| Other assets | $ | $ | $ | $ | |||||||||||||||||||
| Other accrued expenses | $ | ( | $ | ( | $ | ( | $ | ( | |||||||||||||||
| Accrued pension and other postretirement costs | $ | ( | $ | ( | $ | ( | $ | ( | |||||||||||||||
| Accumulated other comprehensive loss | $ | $ | $ | $ | |||||||||||||||||||
| $ | ( | $ | $ | ( | $ | ||||||||||||||||||
F-26
Note10 – Pensions and Other Postretirement Benefits (continued)
Unrecognized actuarial gains and losses arise from several factors, including experience and assumption changes with respect to the obligations and from the difference between expected returns and actual returns on plan assets. Actuarial items consist of the following (in thousands):
| December 31, 2024 | December 31, 2023 | ||||||||||||||||||||||
| U.S. Plans | Non-U.S. Plans | U.S. Plans | Non-U.S. Plans | ||||||||||||||||||||
| Unrecognized net actuarial loss | $ | $ | $ | $ | |||||||||||||||||||
| Unrecognized prior service cost | |||||||||||||||||||||||
| $ | $ | $ | $ | ||||||||||||||||||||
The following table sets forth additional information regarding the projected and accumulated benefit obligations for the pension plans (in thousands):
| December 31, 2024 | |||||||||||
| U.S. Plans | Non-U.S. Plans | ||||||||||
Accumulated benefit obligation, all plans | $ | $ | |||||||||
Plans for which the accumulated benefit obligation exceeds plan assets: | |||||||||||
Projected benefit obligation | $ | $ | |||||||||
Accumulated benefit obligation | $ | $ | |||||||||
| December 31, 2023 | |||||||||||
| U.S. Plans | Non-U.S. Plans | ||||||||||
Accumulated benefit obligation, all plans | $ | $ | |||||||||
Plans for which the accumulated benefit obligation exceeds plan assets: | |||||||||||
Projected benefit obligation | $ | $ | |||||||||
Accumulated benefit obligation | $ | $ | |||||||||
Unrecognized gains and losses are amortized into future net periodic pension cost using the 10% corridor method over the expected remaining service life of the employee group. The following table sets forth the components of net periodic cost of pension (in thousands):
| Years ended December 31, | |||||||||||||||||||||||||||||||||||
| 2024 | 2023 | 2022 | |||||||||||||||||||||||||||||||||
| U.S. Plans | Non-U.S. Plans | U.S. Plans | Non-U.S. Plans | U.S. Plans | Non-U.S. Plans | ||||||||||||||||||||||||||||||
Annual service cost | $ | $ | $ | $ | $ | $ | |||||||||||||||||||||||||||||
Interest cost | |||||||||||||||||||||||||||||||||||
Expected return on plan assets | ( | ( | ( | ||||||||||||||||||||||||||||||||
Amortization of actuarial losses | |||||||||||||||||||||||||||||||||||
| Amortization of prior service cost | ( | ( | |||||||||||||||||||||||||||||||||
Amortization of transition obligation | ( | ||||||||||||||||||||||||||||||||||
Curtailment and settlement losses | ( | ||||||||||||||||||||||||||||||||||
Net periodic benefit cost | $ | $ | $ | $ | $ | $ | |||||||||||||||||||||||||||||
See Note 8 for the pre-tax, tax effect, and after tax amounts included in other comprehensive income during the years ended December 31, 2024, 2023, and 2022.
F-27
Note10 – Pensions and Other Postretirement Benefits (continued)
The following weighted-average assumptions were used to determine benefit obligations at December 31 of the respective years:
| 2024 | 2023 | ||||||||||||||||||||||
| U.S. Plans | Non-U.S. Plans | U.S. Plans | Non-U.S. Plans | ||||||||||||||||||||
| Discount rate | % | % | % | % | |||||||||||||||||||
| Rate of compensation increase | N/A | % | N/A | % | |||||||||||||||||||
| Expected return on plan assets | N/A | % | N/A | % | |||||||||||||||||||
The following weighted-average assumptions were used to determine the net periodic pension costs for the years ended December 31, 2024 and 2023:
| 2024 | 2023 | ||||||||||||||||||||||
| U.S. Plans | Non-U.S. Plans | U.S. Plans | Non-U.S. Plans | ||||||||||||||||||||
| Discount rate | % | % | % | % | |||||||||||||||||||
| Rate of compensation increase | N/A | % | N/A | % | |||||||||||||||||||
| Expected return on plan assets | N/A | % | N/A | % | |||||||||||||||||||
The plans’ expected return on assets is based on management’s expectation of long-term average rates of return to be achieved by the underlying investment portfolios. In establishing this assumption, management considers historical and expected returns for the asset classes in which the plans are invested, advice from pension consultants and investment advisors, and current economic and capital market conditions.
The investment mix between equity securities and fixed income securities is based upon achieving a desired return, balancing higher return, more volatile equity securities, and lower return, less volatile fixed income securities. The target allocation of plan assets approximates the actual allocation of plan assets at December 31, 2024 and 2023.
Plan assets are comprised of:
| December 31, 2024 | December 31, 2023 | ||||||||||||||||||||||
| U.S. Plans | Non-U.S. Plans | U.S. Plans | Non-U.S. Plans | ||||||||||||||||||||
| Equity securities | % | % | |||||||||||||||||||||
| Fixed income securities | % | % | |||||||||||||||||||||
| Cash and cash equivalents | % | % | |||||||||||||||||||||
| Total | % | % | |||||||||||||||||||||
The Company maintains defined benefit retirement plans in certain of its subsidiaries. The assets of the plans are measured at fair value.
Equity securities held by the defined benefit retirement plans consist of equity securities that are valued based on quoted market prices on the last business day of the year. The fair value measurement of the equity securities is considered a Level 2 measurement within the fair value hierarchy.
Fixed income securities held by the defined benefit retirement plans consist of government bonds and corporate notes that are valued based on quoted market prices on the last business day of the year. The fair value measurement of the fixed income securities is considered a Level 2 measurement within the fair value hierarchy.
F-28
Note10 – Pensions and Other Postretirement Benefits (continued)
Cash held by the defined benefit retirement plans consists of deposits on account in various financial institutions. The carrying amount of the cash approximates its fair value. A summary of the Company’s pension plan assets for each fair value hierarchy level are as follows for the periods presented (see Note 17 for further description of the levels within the fair value hierarchy (in thousands)):
| As of December 31, 2024 | Fair value measurements at reporting date using: | ||||||||||||||||||||||
| Total Fair Value | Level 1 Inputs | Level 2 Inputs | Level 3 Inputs | ||||||||||||||||||||
| Defined benefit pension plan assets | |||||||||||||||||||||||
| Equity securities | $ | $ | $ | $ | |||||||||||||||||||
| Fixed income securities | |||||||||||||||||||||||
| Cash and cash equivalents | |||||||||||||||||||||||
| $ | $ | $ | $ | ||||||||||||||||||||
| As of December 31, 2023 | Fair value measurements at reporting date using: | ||||||||||||||||||||||
| Total Fair Value | Level 1 Inputs | Level 2 Inputs | Level 3 Inputs | ||||||||||||||||||||
| Defined benefit pension plan assets | |||||||||||||||||||||||
| Equity securities | $ | $ | $ | $ | |||||||||||||||||||
| Fixed income securities | |||||||||||||||||||||||
| Cash and cash equivalents | |||||||||||||||||||||||
| $ | $ | $ | $ | ||||||||||||||||||||
Estimated future benefit payments are as follows (in thousands):
| US Pension Plans | Non-US Plans | ||||||||||
| 2025 | $ | $ | |||||||||
| 2026 | |||||||||||
| 2027 | |||||||||||
| 2028 | |||||||||||
| 2029 | |||||||||||
| 2030-2034 | |||||||||||
The Company anticipates making contributions to its funded and unfunded pension of approximately $1.2 million during 2025.
Other Postretirement Benefit Plans
In the U.S., the Company maintains two unfunded non-pension other postretirement benefit plans (“OPEB”) which are funded as costs are incurred. These plans provide medical and death benefits to retirees.
F-29
Note10 – Pensions and Other Postretirement Benefits (continued)
The following table sets forth a reconciliation of the benefit obligation, plan assets, and funded status related to other postretirement benefit plans (in thousands):
| OPEB Plans | |||||||||||
| December 31, | |||||||||||
| 2024 | 2023 | ||||||||||
| Change in benefit obligation: | |||||||||||
| Benefit obligation at beginning of year | $ | $ | |||||||||
| Service cost (adjusted for actual employee contributions) | |||||||||||
| Interest cost | |||||||||||
| Contributions by participants | |||||||||||
| Actuarial losses/(gains) | ( | ||||||||||
| Benefits paid | ( | ( | |||||||||
| Plan amendments and other | |||||||||||
| Benefit obligation at end of year | $ | $ | |||||||||
| Change in plan assets: | |||||||||||
| Fair value of plan assets at beginning of year | $ | $ | |||||||||
| Company contributions | |||||||||||
| Contributions by participants | |||||||||||
| Benefits paid | ( | ( | |||||||||
| Fair value of plan assets at end of year | $ | $ | |||||||||
| Funded status at end of year | $ | ( | $ | ( | |||||||
Actuarial gains incurred in 2024 related to our post-retirement plans are primarily the result of the increase discount rate assumptions used to estimate the benefit obligation as of December 31, 2024 compared to December 31, 2023. Actuarial losses incurred in 2023 related to our post-retirement plans are primarily the result of the decrease discount rate assumptions used to estimate the benefit obligation as of December 31, 2023 compared to December 31, 2022.
Amounts recognized in the consolidated balance sheets consist of the following pre-tax amounts (in thousands):
| OPEB Plans | |||||||||||
| December 31, | |||||||||||
| 2024 | 2023 | ||||||||||
| Other accrued expenses | $ | ( | $ | ( | |||||||
| Accrued pension and other postretirement costs | $ | ( | $ | ( | |||||||
| Accumulated other comprehensive gain | $ | ( | $ | ( | |||||||
| $ | ( | $ | ( | ||||||||
Actuarial items consist of the following (in thousands):
| OPEB Plans | |||||||||||
| December 31, | |||||||||||
| 2024 | 2023 | ||||||||||
| Unrecognized net actuarial gain | $ | ( | $ | ( | |||||||
| $ | ( | $ | ( | ||||||||
Unrecognized gains and losses are amortized into future net periodic benefit cost using the 10% corridor method over the expected remaining service life of the employee group. The following table sets forth the components of net periodic benefit costs (in thousands):
F-30
Note10 – Pensions and Other Postretirement Benefits (continued)
| OPEB Plans | |||||||||||||||||
| Years ended December 31, | |||||||||||||||||
| 2024 | 2023 | 2022 | |||||||||||||||
| OPEB Plans | OPEB Plans | OPEB Plans | |||||||||||||||
Net service cost | |||||||||||||||||
Interest cost | |||||||||||||||||
| Amortization of actuarial (gains)/ losses | ( | ( | |||||||||||||||
Net periodic benefit cost | $ | $ | $ | ||||||||||||||
See Note 8 for the pre-tax, tax effect, and after tax amounts included in other comprehensive income during the years ended December 31, 2024, 2023, and 2022.
The following weighted-average assumptions were used to determine benefit obligations at December 31 of the respective years:
| OPEB Plans | |||||||||||
| December 31, | |||||||||||
| 2024 | 2023 | ||||||||||
| Discount rate | % | % | |||||||||
The following weighted-average assumptions were used to determine the net periodic benefit costs for the years ended December 31, 2024 and 2023:
| OPEB Plans | |||||||||||
| December 31, | |||||||||||
| 2024 | 2023 | ||||||||||
| Discount rate | % | % | |||||||||
| Health care trend rate | % | % | |||||||||
The health care trend ultimate rate is 4.04 % per the terms of the plan. The impact of a one-percentage-point change in assumed health care cost trend rates on the net periodic benefit cost and postretirement benefit obligation is not material.
Estimated future benefit payments are as follows (in thousands):
| OPEB Plans | |||||||||||
| 2025 | $ | ||||||||||
| 2026 | |||||||||||
| 2027 | |||||||||||
| 2028 | |||||||||||
| 2029 | |||||||||||
| 2029-2033 | |||||||||||
As the plans are unfunded, the Company's anticipated contributions for 2024 are equal to the estimated benefit payment.
Other Retirement Obligations
F-31
Note10 – Pensions and Other Postretirement Benefits (continued)
The Company participates in various other defined contribution plans based on local law or custom. The Company periodically makes contributions to these plans. At December 31, 2024 and 2023, the consolidated balance sheets include $0.5 million and $0.5 million, respectively, within accrued pension and other postretirement costs related to these plans.
Most of the Company’s U.S. employees are eligible to participate in 401(k) savings plans which provide company matching under various formulas. The Company’s matching expense for the plans was $1.2 million, $1.2 million and $1.1 million for the years ended December 31, 2024, 2023, and 2022, respectively. No material amounts are included in the consolidated balance sheets related to unfunded 401(k) contributions.
Certain key employees participate in a nonqualified deferred compensation plan, which allows these employees to defer a portion of their compensation until retirement, or elect shorter deferral periods. The accompanying consolidated balance sheets include a liability within other noncurrent liabilities related to these deferrals. The Company maintains a nonqualified trust, referred to as a “rabbi” trust, to fund payments under this plan. Rabbi trust assets are subject to creditor claims under certain conditions and are not the property of employees. Therefore, they are accounted for as other noncurrent assets within the consolidated balance sheets. The assets held in the rabbi trust are invested in money market funds and company-owned life insurance policies. The consolidated balance sheets include assets held in trust related to the nonqualified deferred compensation plan of $4.6 million and $4.3 million at December 31, 2024 and 2023 respectively, and the related liabilities of $5.9 million and $5.6 million at December 31, 2024 and 2023, respectively.
In July 2024, the UK Court of Appeal upheld a ruling in the matter of Virgin Media Limited versus NTL Pension Trustees II Limited, that certain historical amendments for contracted out defined benefit schemes were invalid if they were not accompanied by the correct actuarial confirmation, a decision that the Company was not a party to or involved in and could impact the Company’s non US pension plan in the UK. The Company and its UK pension scheme trustee are reviewing this development, along with its actuaries, and considering whether this decision has any implications for its UK pension plan.
Note 11 – Share-Based Compensation
The Vishay Precision Group, Inc. 2022 Stock Incentive Plan (the "2022 plan") permits the issuance of up to 608,000 shares of common stock. At December 31, 2024 the Company had reserved 440,970 shares of common stock for future grant of equity awards (restricted stock, unrestricted stock, restricted stock units (“RSUs”), or stock options) pursuant to the 2022 Plan. If any outstanding awards are forfeited by the holder or canceled by the Company, the underlying shares would be available for re-grant to others. If shares are withheld for payment of taxes, those shares do not become available for future grant under the 2022 plan.
Restricted Stock Units
Pursuant to the 2022 plan, the Company issued RSUs to board members, executive officers, and certain employees of the Company during 2024. The amount of compensation cost related to share-based payment transactions is measured based on the grant-date fair value of the equity instruments issued. VPG determines compensation cost for RSUs based on the grant-date fair value of the underlying common stock. Compensation cost is recognized over the period that the participant provides service in exchange for the award. The Company recognizes compensation cost for RSUs that are expected to vest and for which performance criteria are expected to be met.
On March 7, 2024 and in accordance with their respective employment agreements, VPG’s three executive officers were granted annual equity awards in the form of RSUs, of which 50 % are performance-based. The awards have an aggregate target grant-date fair value of $1.7 million and were comprised of 49,190 RSUs. Fifty percent of these awards will vest on January 1, 2027, subject to the executives’ continued employment. The performance-based portion of the RSUs will also vest on January 1, 2027, subject to the executives' continued employment and the satisfaction of certain performance objectives relating to three-year cumulative “adjusted free cash flow” and "net earnings goals", each weighted equally.
On March 7, 2024, certain non-executive VPG employees were granted annual equity awards in the form of RSUs. Certain employees received awards, of which 75 % are performance-based and certain employees received awards of which 50 % are performance-based. The awards have an aggregate grant-date fair value of $0.6 million and were comprised of 16,821 RSUs. The non-performance portion of these awards (twenty-five percent for certain employees and fifty percent for certain employees) will vest on January 1, 2027, subject to the employees' continued employment. The performance-based portion of the RSUs will also vest on January 1, 2027, subject to the employees' continued employment and the satisfaction of certain performance objectives relating to three-year cumulative earnings and cash flow goals, each weighted equally.
On May 22, 2024, and in accordance with the Company's 2024 Non-Employee Director Compensation Plan, the Board of Directors approved the issuance of an aggregate of 14,826 RSUs to the independent board members of the Board of Directors. The awards have an aggregate grant-date fair value of $0.5 million and will vest on or before the 2025 Annual Stockholders
F-32
Note 11 – Share-Based Compensation (continued)
Meeting in May 2025, subject to each applicable director's continued service on the Board of Directors. Vesting of equity awards is subject to acceleration under certain circumstances.
On August 14, 2024, and in accordance with the Company's 2024 Non-Employee Director Compensation Plan, the Board of Directors approved the issuance of an aggregate of 2,265 RSUs to an independent board member of the Board of Directors in connection with his appointment to the Board of Directors. The award had an aggregate grant-date fair value of $0.06 million and will vest on or before the 2025 Annual Stockholders Meeting in May 2025, subject to such independent director's continued service on the Board of Directors. Vesting of such equity awards is subject to acceleration under certain circumstances.
On December 4, 2024, and in accordance with the Company's 2024 Non-Employee Director Compensation Plan, the Board of Directors approved the issuance of an aggregate of 1,588 RSUs to an independent board member of the Board of Directors in connection with her appointment to the Board of Directors. The award had an aggregate grant-date fair value of $0.04 and will vest on or before the 2025 Annual Stockholders Meeting in May 2025, subject to such independent director's continued service on the Board of Directors. Vesting of such equity awards is subject to acceleration under certain circumstances.
The amount of compensation cost related to share-based payment transactions is measured based on the grant-date fair value of the equity instruments issued. VPG determines compensation cost for RSUs based on the grant-date fair value of the underlying common stock. The Company recognizes compensation cost for RSUs that are expected to vest and for which performance criteria are expected to be met. The following table summarizes share-based compensation expense recognized (in thousands):
Vesting of equity awards may be subject to acceleration under certain circumstances.
RSU activity is presented below (number of RSUs in thousands):
| Years ended December 31, | |||||||||||||||||||||||||||||||||||
| 2024 | 2023 | 2022 | |||||||||||||||||||||||||||||||||
| Number of RSUs | Weighted Average Grant-date Fair Value | Number of RSUs | Weighted Average Grant-date Fair Value | Number of RSUs | Weighted Average Grant-date Fair Value | ||||||||||||||||||||||||||||||
| Outstanding: | |||||||||||||||||||||||||||||||||||
| Beginning of year | $ | $ | $ | ||||||||||||||||||||||||||||||||
| Granted | |||||||||||||||||||||||||||||||||||
| Vested | ( | ( | ( | ||||||||||||||||||||||||||||||||
| Forfeited | ( | ( | |||||||||||||||||||||||||||||||||
| End of year | $ | $ | $ | ||||||||||||||||||||||||||||||||
The fair value of the RSUs vested during 2024 was $1.9 million. Included in the 2024, 2023 and 2022 activity are RSU's forfeited as a result of performance objectives not being met. These awards are therefore available for future grants under the Plan.
None of the RSUs with performance-based criteria is expected to vest in the coming 3 years period.
Share-Based Compensation Expense
The following table summarizes pre-tax share-based compensation expense recognized (in thousands):
| Years ended December 31, | |||||||||||||||||
| 2024 | 2023 | 2022 | |||||||||||||||
| Restricted stock units | $ | $ | $ | ||||||||||||||
Share-based compensation expense is recognized ratably over the vesting period of the awards and for RSUs with performance criteria, is recognized for RSU's that are expected to vest and for which performance criteria are expected to be met.
During 2024, a net adjustment of $1.5 million decreasing share-based compensation expense was recorded, based on the evaluation of performance objectives associated with awards granted in 2022, 2023 and 2024. It was determined that certain objectives were not likely to be fully met, necessitating a reversal of certain compensation expense associated with those awards.
F-33
Note 11 – Share-Based Compensation (continued)
During 2023, a net adjustment of $0.4 million decreasing share-based compensation expense was recorded, based on the evaluation of performance objectives associated with awards granted in 2021, 2022 and 2023. It was determined that certain objectives were not likely to be fully met, necessitating a reversal of certain compensation expense associated with those awards.
During the fourth quarter of 2022, a net adjustment of $0.3 million increasing share-based compensation expense was recorded, based on the evaluation of performance objectives associated primarily with awards granted in 2020. It was determined that certain objectives, which were deemed not likely to be met in previous years, were met.
The total tax benefit on share-based compensation expense was $0.2 million, $0.5 million and $0.5 million for the years ended December 31, 2024, 2023 and 2022, respectively. The deferred tax benefit (expense) on share-based compensation expense was $(0.3 ) million, $0.1 million, and $0.2 million for the years ended December 31, 2024, 2023, and 2022, respectively.
As of December 31, 2024, the Company had $0.3 million of unrecognized share-based compensation expense related to share-based awards that expected to be recognized over a weighted-average period of approximately 0.4 years.
Note 12 – Commitments, Contingencies, and Concentrations
Tax Assessment
During the second quarter of 2024, the Israel Tax Authority has issued a Value Added Tax (VAT) assessment to the Company, in the amount of ILS 8.4 million (approximately $2.3 million), pertaining to claims of VAT between the years 2019 to 2023.
The Company believes that the liability for the assessment is not probable and files an appeal against this assessment.
Given the stage of this matter, the Company is currently unable to predict the likely outcome or estimate the potential financial impact, if any, of this matter.
Litigation
The Company is subject to various legal proceedings that constitute ordinary, routine litigation incidental to its business. The Company is of the opinion that the disposition of these proceedings will not have a material adverse effect on its business or its financial condition, results of operations, and cash flows.
Executive Employment Agreements
The Company has employment agreements with its executive officers which outline base salary, incentive compensation, and equity-based compensation. The employment agreements with the Company's executive officers also provide for incremental compensation in the event of termination without cause or resignation for good reason.
Sources of Supplies
Although most materials incorporated in the Company’s products are available from a number of sources, certain materials are available only from a relatively limited number of suppliers.
Some of the most highly specialized materials for the Company’s sensors are sourced from a single vendor. The Company maintains a safety stock inventory of certain critical materials at its facilities.
Certain metals used in the manufacture of the Company’s products are traded on active markets, and can be subject to significant price volatility.
Market Concentrations
No single customer comprises greater than 10% of net revenues.
The vast majority of the Company’s products are used in the broad industrial market, with selected uses in military and aerospace, medical, agriculture, and construction. Within the broad industrial segment, the Company’s products serve wide applications in the waste management, bulk hauling, logging, scale manufacturing, engineering systems, pharmaceutical, oil, chemical, steel, paper, and food industries.
Credit Risk Concentrations
Financial instruments with potential credit risk consist principally of cash and cash equivalents, accounts receivable, and notes receivable. The Company maintains cash and cash equivalents with various major financial institutions. Concentrations of credit risk with respect to receivables are generally limited due to the Company’s large number of customers and their dispersion across many countries and industries. At December 31, 2024 and 2023, the Company had no significant concentrations of credit risk.
F-34
Note 12 – Commitments, Contingencies, and Concentrations (continued)
Geographic Concentrations
At December 31, 2024 and 2023, a significant percentage of the Company’s cash and cash equivalents are held outside the United States. See the following table for the percentage of cash and cash equivalents by region of subsidiary, at December 31, 2024 and December 31, 2023:
| December 31, | |||||||||||
| 2024 | 2023 | ||||||||||
| Asia | % | % | |||||||||
| United States | % | % | |||||||||
| Israel | % | % | |||||||||
| Europe | % | % | |||||||||
| Canada | % | % | |||||||||
| Total | % | % | |||||||||
Note 13 - Leases
The Company primarily leases office and manufacturing facilities in addition to vehicles, which have remaining terms of less than one year to eleven years, ten months, thirteen days .
Leases recorded on the balance sheet consist of the following (in thousands):
| Leases | December 31, 2024 | December 31, 2023 | |||||||||
| Assets | |||||||||||
| Operating lease right of use asset | $ | $ | |||||||||
| Liabilities | |||||||||||
| Operating lease - current | $ | $ | |||||||||
| Operating lease - non-current | $ | $ | |||||||||
Other information related to lease term and discount rate is as follows:
| December 31, 2024 | |||||
| Operating leases weighted average remaining lease term (in years) | |||||
| Operating leases weighted average discount rate | % | ||||
The components of lease expense are as follows (in thousands):
| Year Ended | |||||||||||||||||
| December 31, 2024 | December 31, 2023 | December 31, 2022 | |||||||||||||||
| Operating lease cost | $ | $ | $ | ||||||||||||||
| Short-term lease cost | |||||||||||||||||
| Sublease income | ( | ( | ( | ||||||||||||||
| Total net lease cost | $ | $ | $ | ||||||||||||||
Right of use assets obtained in exchange for new operating lease liability during 2024 were $2.0 million and in 2023 were $6.8 million. The Company paid $5.2 million for its operating leases for the year ended December 31, 2024 and $5.1 million for the year ended December 31, 2023, which are included in operating cash flows on the consolidated statements of cash flows.
Undiscounted maturities of operating lease payments as of December 31, 2024 are summarized as follows (in thousands):
F-35
Note 13 - Leases ( continued)
| 2025 | $ | ||||
| 2026 | |||||
| 2027 | |||||
| 2028 | |||||
| 2029 | |||||
| Thereafter | |||||
| Total future minimum lease payments | $ | ||||
| Less: amount representing interest | ( | ||||
| Present value of future minimum lease payments | $ | ||||
Note 14 – Segment and Geographic Data
VPG reports in three reportable segments: Sensors segment, Weighing Solutions segment, and Measurement Systems segment. The Sensors reporting segment is comprised of the foil resistor and strain gage operating segments. The Weighing Solutions segment is comprised of specialized modules and systems used to precisely measure weight, force torque, and pressure. The Measurement Systems reporting segment is comprised of highly specialized systems for steel production, materials development, and safety testing.
The chief operating decision maker ("CODM") is our chief executive officer. The evaluation of the segments performance is based on multiple performance measures including revenues and operating income, exclusive of certain items. Management believes that evaluating segment performance, excluding items such as restructuring severance, impairment of goodwill and indefinite-lived intangible assets and amortization of intangible assets, acquisition costs, and other items is meaningful because they relate to occurrences or events that are outside of our core operations, and management believes that the use of these measures provides a consistent basis to evaluate our operating profitability and performance trends across comparable periods.
The accounting policies of the segments are the same as those described in the summary of significant accounting policies (see Note 1). Reporting segment assets are the owned or allocated assets used by each segment. Products are transferred between segments on a basis intended to reflect, as nearly as practicable, the market value of the products.
The following table sets forth reporting segment information (in thousands):
F-36
Note 14 – Segment and Geographic Data (continued)
| Sensors | Weighing Solutions | Measurement Systems | Corporate/ Other | Total | ||||||||||||||||||||||||||||
| 2024 | ||||||||||||||||||||||||||||||||
| Net third-party revenues | $ | $ | $ | $ | — | $ | ||||||||||||||||||||||||||
| Intersegment revenues | — | ( | — | |||||||||||||||||||||||||||||
| Total revenues | ( | |||||||||||||||||||||||||||||||
| Costs of products sold | ( | |||||||||||||||||||||||||||||||
| Gross profit | ||||||||||||||||||||||||||||||||
| Research and development expenses | — | |||||||||||||||||||||||||||||||
| Segment selling, general, and administrative expenses* | — | |||||||||||||||||||||||||||||||
| Segment operating income | ||||||||||||||||||||||||||||||||
| Other supplemental information: | ||||||||||||||||||||||||||||||||
| Acquisition costs | ||||||||||||||||||||||||||||||||
| Restructuring costs | ||||||||||||||||||||||||||||||||
| Depreciation and amortization expense | ||||||||||||||||||||||||||||||||
| Capital expenditures | ||||||||||||||||||||||||||||||||
| Total assets | ||||||||||||||||||||||||||||||||
| 2023 | ||||||||||||||||||||||||||||||||
| Net third-party revenues | $ | $ | $ | $ | — | $ | ||||||||||||||||||||||||||
| Intersegment revenues | ( | — | ||||||||||||||||||||||||||||||
| Total revenues | ( | |||||||||||||||||||||||||||||||
| Costs of products sold | ( | |||||||||||||||||||||||||||||||
| Gross profit | — | |||||||||||||||||||||||||||||||
| Research and development expenses | — | |||||||||||||||||||||||||||||||
| Segment selling, general, and administrative expenses* | — | |||||||||||||||||||||||||||||||
| Segment operating income | ||||||||||||||||||||||||||||||||
| Other supplemental information: | ||||||||||||||||||||||||||||||||
| Restructuring costs | ||||||||||||||||||||||||||||||||
| Depreciation and amortization expense | ||||||||||||||||||||||||||||||||
| Capital expenditures | ||||||||||||||||||||||||||||||||
| Total assets | ||||||||||||||||||||||||||||||||
| 2022 | ||||||||||||||||||||||||||||||||
| Net third-party revenues | $ | $ | $ | $ | — | $ | ||||||||||||||||||||||||||
| Intersegment revenues | ( | — | ||||||||||||||||||||||||||||||
| Total revenues | ( | |||||||||||||||||||||||||||||||
| Costs of products sold | ( | |||||||||||||||||||||||||||||||
| Gross profit | ||||||||||||||||||||||||||||||||
| Research and development expenses | — | |||||||||||||||||||||||||||||||
| Segment selling, general, and administrative expenses* | — | |||||||||||||||||||||||||||||||
| Segment operating income | ||||||||||||||||||||||||||||||||
| Other supplemental information: | ||||||||||||||||||||||||||||||||
| Restructuring costs | ||||||||||||||||||||||||||||||||
| Depreciation and amortization expense | ||||||||||||||||||||||||||||||||
| Capital expenditures | ||||||||||||||||||||||||||||||||
| Total assets | ||||||||||||||||||||||||||||||||
F-37
Note 14 – Segment and Geographic Data (continued)
* Segment selling, general and administrative expenses are direct selling, general and administrative expenses, excluding research and development expenses and amortization of intangible assets attributed to the segment.
The following table reconciles segment profit to consolidated income before taxes (in thousands):
| Years ended December 31, | |||||||||||||||||
| 2024 | 2023 | 2022 | |||||||||||||||
| Segment operating income | $ | $ | $ | ||||||||||||||
| Acquisition costs | |||||||||||||||||
| Restructuring costs | |||||||||||||||||
| Unallocated G&A expenses | |||||||||||||||||
| Operating income | $ | $ | $ | ||||||||||||||
| Other income (expense) | $ | $ | ( | $ | |||||||||||||
| Income before taxes | $ | $ | $ | ||||||||||||||
The following geographic data includes property and equipment based on physical location (in thousands):
| December 31, | |||||||||||
| Property and Equipment - Net | 2024 | 2023 | |||||||||
| United States | $ | $ | |||||||||
| Europe | |||||||||||
| Israel | |||||||||||
| Asia | |||||||||||
| Canada and Other | |||||||||||
| $ | $ | ||||||||||
F-38
Note 15 – Earnings Per Share
Basic earnings per share are computed using the weighted average number of common shares outstanding during the periods presented. Diluted earnings per share is computed using the weighted average number of common shares outstanding, adjusted to include the potentially dilutive effect of restricted stock units (see Note 10), and other potentially dilutive securities.
The following table sets forth the computation of basic and diluted earnings per share attributable to VPG stockholders (in thousands, except earnings per share):
| Years ended December 31, | |||||||||||||||||
| 2024 | 2023 | 2022 | |||||||||||||||
| Numerator: | |||||||||||||||||
| Numerator for basic and diluted earnings per share: | |||||||||||||||||
Net earnings attributable to VPG stockholders | $ | $ | $ | ||||||||||||||
Denominator: | |||||||||||||||||
Denominator for basic earnings per share: | |||||||||||||||||
Weighted average shares | |||||||||||||||||
Effect of dilutive securities: | |||||||||||||||||
Restricted stock units | |||||||||||||||||
Dilutive potential common shares | |||||||||||||||||
Denominator for diluted earnings per share: | |||||||||||||||||
Adjusted weighted average shares | |||||||||||||||||
Basic earnings per share attributable to VPG stockholders | $ | $ | $ | ||||||||||||||
Diluted earnings per share attributable to VPG stockholders | $ | $ | $ | ||||||||||||||
Note 16– Additional Financial Statement Information
The caption “Other” on the consolidated statements of operations consists of the following (in thousands):
| Years ended December 31, | |||||||||||||||||
| 2024 | 2023 | 2022 | |||||||||||||||
| Foreign exchange gain/(loss) | $ | $ | ( | $ | |||||||||||||
| Interest income | |||||||||||||||||
| Pension expense | ( | ( | ( | ||||||||||||||
| Other | ( | ( | ( | ||||||||||||||
| $ | $ | $ | |||||||||||||||
Foreign currency exchange gains and losses represent the impact of changes in foreign currency exchange rates. The foreign exchange gain/(loss) for the year ended December 31, 2024, is primarily due to fluctuations in the Japanese yen, Israeli shekel and the Canadian dollar. The foreign exchange gain/(loss) for the year ended December 31, 2023, is primarily due to fluctuations in the Israeli shekel, the Canadian dollar and the British pound and for the year ended December 31, 2022, is primarily due to fluctuations in the Israeli shekel, the Japanese yen and the British pound.
F-39
Note 16 – Additional Financial Statement Information (continued)
Pension expense represents the net periodic benefit cost excluding the service cost.
Other accrued expenses consist of the following (in thousands):
| December 31, | |||||||||||
| 2024 | 2023 | ||||||||||
| Customer advance payments | $ | $ | |||||||||
| Accrued restructuring | |||||||||||
| Goods received, not yet invoiced | |||||||||||
| Accrued taxes, other than income taxes | |||||||||||
| Accrued commissions | |||||||||||
| Accrued professional fees | |||||||||||
| Accrued technical warranty | |||||||||||
| Current accrued pension and other post retirement costs | |||||||||||
| Other | |||||||||||
| $ | $ | ||||||||||
Israeli Severance Pay
The Israeli Severance Pay Law, 1963 ("Severance Pay Law"), specifies that employees of our Israeli subsidiary are entitled to severance payment, following the termination of their employment. Under the Severance Pay Law, the severance payment is calculated as one-month salary for each year of employment, or a portion thereof.
Part of the subsidiary's liability for severance pay is covered by the provisions of Section 14 of the Severance Pay Law ("Section 14"). Under Section 14, employees are entitled to monthly deposits, at a rate of 8.33 % of their monthly salary, contributed on their behalf to their insurance funds. Payments in accordance with Section 14 release the subsidiary from any future severance payments in respect of those employees. As a result, the Company does not recognize any liability for severance pay due to these employees and the deposits under Section 14 are not recorded as an asset in the Company's balance sheet.
Note 17 – Fair Value Measurements
ASC Topic 820, Fair Value Measurements and Disclosures, establishes a valuation hierarchy of the inputs used to measure fair value. This hierarchy prioritizes the inputs to valuation techniques used to measure fair value into three broad levels. The following is a brief description of those three levels:
Level 1: Observable inputs such as quoted prices (unadjusted) in active markets for identical assets or liabilities.
Level 2: Inputs other than quoted prices that are observable for the asset or liability, either directly or indirectly. These include quoted prices for similar assets or liabilities in active markets and quoted prices for identical or similar assets or liabilities in markets that are not active.
Level 3: Unobservable inputs that reflect the Company’s own assumptions.
An asset or liability’s classification within the hierarchy is determined based on the lowest level input that is significant to the fair value measurement.
F-40
Note 17 – Fair Value Measurements (continued)
The following tables provide the financial assets and liabilities carried at fair value measured on a recurring basis (in thousands):
| As of December 31, 2024 | Fair value measurements at reporting date using: | ||||||||||||||||||||||||||||
| Total Fair Value | Level 1 Inputs | Level 2 Inputs | Level 3 Inputs | ||||||||||||||||||||||||||
| Assets: | |||||||||||||||||||||||||||||
| Assets held in rabbi trusts | $ | $ | $ | $ | |||||||||||||||||||||||||
| As of December 31, 2023 | Fair value measurements at reporting date using: | ||||||||||||||||||||||||||||
| Total Fair Value | Level 1 Inputs | Level 2 Inputs | Level 3 Inputs | ||||||||||||||||||||||||||
| Assets: | |||||||||||||||||||||||||||||
| Assets held in rabbi trusts | $ | $ | $ | $ | |||||||||||||||||||||||||
The Company maintains nonqualified trusts, referred to as “rabbi” trusts, to fund payments under deferred compensation and nonqualified pension plans. Rabbi trust assets consist primarily of marketable securities, classified as available-for-sale money market funds at December 31, 2024 and December 31, 2023, and company-owned life insurance assets. The marketable securities held in the rabbi trusts are valued using quoted market prices on the last business day of the year. The company-owned life insurance assets are valued in consultation with the Company’s insurance brokers using the value of underlying assets of the insurance contracts. The fair value measurement of cash and cash equivalents held in the rabbi trust is considered a Level 1 measurement and the measurement of the company-owned life insurance assets is considered a Level 2 measurement within the fair value hierarchy.
The fair value of the long-term debt, excluding capitalized deferred financing costs at December 31, 2024 and December 31, 2023 approximates its carrying value, as the revolving debt and term loans are reset monthly based on current market rates, plus a base rate as specified in the 2024 Credit Agreement. The fair value measurement of long-term debt is considered a Level 2 measurement.
The Company’s financial instruments include cash and cash equivalents, accounts receivable, short-term notes payable, and accounts payable. The carrying amounts for these financial instruments reported in the consolidated balance sheets approximate their fair values.
Note 18 – Related Party Transactions
Following the spin-off from Vishay Intertechnology, Inc. on July 6, 2010, VPG is an independent, publicly-traded company, and Vishay Intertechnology does not retain any ownership interest in VPG, although a common group of stockholders control a significant portion of the voting power of each company and the companies have three common board members.
Subsequent to the spin-off, VPG and Vishay Intertechnology continue to share certain manufacturing locations. VPG owns one location in Japan at which it leases space to Vishay Intertechnology. Lease receipts related to the shared facility are immaterial.
F-41
This Securities Trading Policy (this “Policy”) has been prepared to focus Vishay Precision Group, Inc. (the “Company” or “Vishay Precision Group”) and its personnel on areas of ethical risk regarding trading stock of the Company and certain other firms, provide guidance to personnel to help them recognize and deal with such ethical issues, and help foster a culture of honesty and accountability respecting such matters. This Policy applies to every director, officer, and employee of Vishay Precision Group and its subsidiaries throughout the world. While this Policy details conduct expected of each of us and standards to follow in our trading of Company securities, no code or policy can spell out the appropriate conduct and ethical behavior for every situation with which we are confronted. In the final analysis, we have to rely on our own common sense, good judgment and conscience. Therefore, this Policy is intended to provide guidelines to assist us in our work for Vishay Precision Group. At Vishay Precision Group, we expect everyone to conduct herself and himself according to the highest standards of business ethics and integrity. Adherence to these principles is important in order to maintain public trust and confidence in our Company. Even an action that merely appears to be unethical can reflect negatively on us and harm our community standing. Vishay Precision Group takes great pride in the high level of integrity and business ethics displayed by our directors, officers, and employees. We hope and expect that the publication of this Policy will help foster and maintain this tradition. February 28, 2024 Sincerely, /s/ Saul V. Reibstein Saul V. Reibstein Chairman of the Board
February 28, 2024 SECURITIES TRADING POLICY Background The board of directors of Vishay Precision Group, Inc. (the “Company” or “Vishay Precision Group”) has adopted this Securities Trading Policy (this “Policy”) for our directors, officers, employees and consultants with respect to the trading of the Company’s securities, as well as the securities of certain other firms, as described further herein. Federal and state securities laws generally prohibit the purchase or sale of a company’s securities by persons who are aware of material information about that company that is not generally known or available to the public. These laws also prohibit persons who are aware of such material nonpublic information from disclosing this information to others who may trade. Companies and their controlling persons are also subject to liability if they fail to take reasonable steps to prevent securities trading by company personnel in violation of applicable securities laws. Failure to comply with this Policy may also require the Company to impose sanctions on offending parties. This Policy is designed to prevent insider trading or allegations of insider trading, and to protect the Company’s and your reputation for integrity and ethical conduct. It is your obligation to understand and comply with this Policy. As the ultimate responsibility for adhering to this Policy and avoiding improper trading rests with you, the Company believes it is in the Company’s best interest and your best interest to closely adhere to this Policy. Should you have any questions regarding this Policy, please contact the Company’s Legal Department (the “Legal Department”). Scope of Policy Persons Covered. As a director, officer, employee or consultant of the Company or its subsidiaries, this Policy applies to you. The same restrictions that apply to you apply to your family members who reside with you, anyone else who lives in your household and any family members who do not live in your household but whose transactions in Company securities are directed by you or are subject to your influence or control (such as parents or children who consult with you before they trade in Company securities). You are responsible for making sure that the purchase or sale of any security covered by this Policy by any such person complies with this Policy. This Policy further applies to any entities that you influence or control, including any corporations, partnerships or trusts (collectively referred to as “Controlled Entities”), and transactions by these Controlled Entities should be treated for the purposes of this Policy and applicable securities laws as if they were for your own account. One portion of this Policy—under the heading “Pre-clearance and Blackout Procedures”— only applies to “Covered Persons” as defined in that section.
-2- Companies Covered. The prohibition on securities trading in this Policy is not limited to trading in the Company’s securities. It includes trading in the securities of firms such as customers, suppliers or competitors of the Company and those with which the Company may have negotiated or may be negotiating commercial agreements or significant transactions, such as an acquisition, investment or sale. Information that is not material to the Company may nevertheless be material to one of those other firms, and you may not buy or sell its securities at any time when you have material nonpublic information about it or have material nonpublic information that could affect its share price. Transactions Covered. Trading includes purchases and sales of stock, derivative securities such as put and call options and convertible debentures, warrants or preferred stock, and debt securities (debentures, bonds and notes), as well as derivative securities not issued by the Company such as exchange-traded put or call options or swaps relating to the Company’s securities. Transactions Not Covered by this Policy Stock Option Exercises. This Policy’s trading restrictions generally do not apply to the exercise of a stock option for cash or to the net exercise of a stock option. The trading restrictions do apply, however, to any sale of the underlying stock or to a cashless exercise of the option through a broker, as this entails selling a portion of the underlying stock to cover the costs of exercise. The restrictions also apply to situations where an option holder pays the purchase price in Vishay Precision Group stock, if this is permitted under the terms of the option. Restricted Stock Awards. This Policy does not apply to the vesting of restricted stock, or the exercise of a tax withholding right pursuant to which you elect to have the Company withhold shares of stock to satisfy tax withholding requirements upon the vesting of any restricted stock. This Policy does apply, however, to any market sale of restricted stock after it has vested. Transactions Not Involving a Purchase or Sale. Bona fide gifts are not transactions subject to this Policy, unless the person making the gift has reason to believe that the recipient intends to sell the Company’s securities while the officer, employee or director is aware of material nonpublic information or is subject to the trading restrictions specified below in “Pre-Clearance and Blackout Procedures.” Statement of Policy Trading on Inside Information. You may not trade in the securities of the Company, directly or through family members or other persons or entities, if you are aware of material nonpublic information relating to the Company. Similarly, you may not trade in the securities of any other company if you are aware of material nonpublic information about that company which you obtained in the course of your involvement with the Company. Disclosure of Material Nonpublic Information to Others. You may not disclose material nonpublic information to persons within the Company whose jobs do not require them to have that information, or outside of the Company to any persons, including, but not limited to, family, friends, business associates, investors and expert consulting firms, unless any such disclosure is made in accordance with the Company’s policies regarding the protection or authorized external disclosure of information regarding the Company. Similarly, you may not communicate to any
-3- such persons any material nonpublic information about another company which you obtained in the course of your involvement with the Company. No Tipping. You may not pass material nonpublic information on to others or recommend to anyone the purchase or sale of any securities when you are aware of such material nonpublic information. This practice, known as “tipping,” also violates the securities laws and can result in the same civil and criminal penalties that apply to insider trading, even though you did not trade and did not gain any benefit from another’s trading. Because even a casual remark recommending a purchase or sale of securities covered by this Policy could be misconstrued as being based upon material, nonpublic information, you should exercise caution in making any such recommendation. Pre-clearance and Blackout Procedures To help prevent inadvertent violations of the federal securities laws and the Hart-Scott Rodino Antitrust Improvements Act of 1976, and to avoid even the appearance of trading on inside information, directors, executive officers subject to Section 16 of the Securities Exchange Act of 1934, as amended (the “Exchange Act”), and certain designated employees and consultants of the Company and its subsidiaries who are likely to have access to material nonpublic information about the Company (each, a “Covered Person”) are required to comply with the pre-clearance and blackout procedures described herein. The names and/or positions of the Covered Persons subject to these pre-clearance and blackout procedures are listed on the attached Schedule I. The Company may from time to time designate other individuals or positions that are subject to this policy and will amend Schedule I from time to time as necessary to reflect changes. Pre-clearance Procedures Covered Persons are subject to the following pre-clearance procedures: You, together with your immediate family members and members of your or their households, may not engage in any transaction involving the Company’s securities without first obtaining pre- clearance of the transaction from the Company’s Legal Department.1 This includes stock plan transactions such as gifts, loans, contribution to a trust or any other transfer. This does not include the exercise of an employee stock option acquired pursuant to the Company’s plans, or to the exercise of a tax withholding right pursuant to which a person has elected to have the Company withhold shares subject to an option to satisfy tax withholding requirements. This does include, however, any sale of stock as part of a broker-assisted cashless exercise of an option, or any other market sale for the purpose of generating the cash needed to pay the exercise price of an option. A request for pre-clearance should be submitted to the Legal Department at least two business days in advance of the proposed transaction. The Legal Department is under no obligation to approve a trade submitted for pre-clearance, and may determine not to permit the trade. Unless the Legal Department specifies otherwise, a pre-clearance for a trade or other activity involving Company’ securities will be valid for a period of five business days from the date on which the pre-clearance is given. 1 The Senior Director of the Legal Department may not trade in Company securities unless the Chief Executive Officer or the Chief Financial Officer has approved the trade(s) in accordance with the procedures set forth in this Policy.
-4- Blackout Procedures Covered Persons are subject to the following blackout procedures. Blackout Periods. The Company’s announcement of its quarterly and annual financial results almost always has the potential to have a material effect on the market for the Company’s securities. Therefore, to avoid even the appearance of trading on the basis of material nonpublic information, you may not trade in the Company’s securities during the period beginning 30 days before the end of a quarter and ending after the conclusion of the second full business day following the release of the Company’s earnings for that quarter or year. Interim Earnings Guidance and Event-Specific Blackouts. The Company may on occasion issue interim earnings guidance or other potentially material information by means of a press release, SEC filing on Form 8-K or other means designed to achieve widespread dissemination of the information. You should anticipate that trading will be blacked out while the Company is in the process of assembling the information to be released and until the information has been released and fully absorbed by the market. From time to time, an event may occur that is material to the Company and is known by only a few directors or executives. So long as the event remains material and nonpublic, the persons who are aware of the event, as well as other persons covered by the earnings blackout procedures, may not trade in the Company’s securities. The existence of an event- specific blackout will not be announced, other than to those who are aware of the event giving rise to the blackout. If, however, a person whose trades are subject to pre-clearance requests permission to trade in the Company’s securities during an event-specific blackout, the Legal Department will inform the requesting person of the existence of a blackout period, without disclosing the reason for the blackout. Any person made aware of the existence of an event-specific blackout should not disclose the existence of the blackout to any other person. The failure of the Legal Department to designate a person as being subject to an event-specific blackout will not relieve that person of the obligation not to trade while aware of material nonpublic information. Hardship Exceptions. A Covered Person who is subject to an earnings blackout period and who has an unexpected and urgent need to sell Company stock in order to generate cash may, in appropriate circumstances, be permitted to sell Company stock even during the blackout period. Hardship exceptions may be granted only by the Legal Department and must be requested at least two days in advance of the proposed trade. A hardship exception may be granted only if the Legal Department concludes that the Company’s earnings information for the applicable quarter does not constitute material nonpublic information. Exception for Approved 10b5-1 Plans Trades by Covered Persons in the Company’s securities that are executed pursuant to an approved Rule 10b5-1 Plan (as defined herein) are not subject to the prohibition on trading on the basis of material nonpublic information contained in the Policy or, after the applicable cooling-off period,
-5- to the restrictions set forth above relating to pre-clearance procedures and blackout periods. However, as stated in this Policy under the heading “Rule 10b5-1 Trading Plans,” all such trading plans must be approved in advance in writing by the Legal Department. Post-Employment Transactions If you are aware of material nonpublic information when you terminate employment or services, you may not trade in the Company’s securities until that information has become public or is no longer material. In all other respects, the pre-clearance and blackout procedures set forth in this section of this Policy will cease to apply to your transactions in Company securities upon the expiration of any “blackout period” that is applicable to your transactions at the time of your termination of employment or services. Compliance with Section 16 and Rule 144 Directors and executive officers are responsible for compliance with Section 16 of the Exchange Act (“Section 16") and Rule 144 of the Securities Act of 1933, as amended (the “Securities Act”), in connection with their transactions in the Company’s securities. The requirements of this Policy do not supersede the required compliance with your obligations under Section 16 or Rule 144. Section 16. Directors and executive officers should be aware that most transactions in the Vishay Precision Group stock are subject to the two business day reporting requirements under Section 16. The Company’s policy is to assist directors and executive officers in completing and filing their Section 16 reports. It is important that the Legal Department receive prompt notice of reportable transactions, so that the Company can assist in filing the required reports on a timely basis. Rule 144. Directors and executive officers are required to file Form 144 before making open market sales of Vishay Precision Group stock. This form is generally prepared and filed by your broker. Company Assistance Your compliance with the pre-clearance and blackout procedures that are a part of this Policy is of the utmost importance both for you and for the Company. If you have any questions about pre- clearance and blackout procedures described above or any other portion of this Policy or their application to any proposed transaction, you may obtain additional guidance from the Legal Department. Certification All Covered Persons must certify their understanding of, and intent to comply with, this Policy, including the pre-clearance and blackout procedures portion thereof, on the form attached to this Policy as Schedule II. Definition of Material Nonpublic Information Inside information has two important elements -- materiality and public availability.
-6- Material Information. Information is material if a reasonable investor would consider it important in deciding whether to buy, hold or sell a security. Any information that could reasonably be expected to affect the price of the security is material. Common examples of material information about a company include, but are not limited to: • Projections of future earnings or losses or other earnings guidance. • Earnings that are inconsistent with the consensus expectations of the investment community. • A pending or proposed merger, acquisition or tender offer or an acquisition or disposition of significant assets. • A change in senior management or the board of directors. • The establishment or material modification of a repurchase program for company securities. • Major events regarding the company’s securities, including the declaration of a stock split or a cash or stock dividend, or the offering of additional securities. • Significant changes in the company’s debt ratings. • Actual or threatened major litigation, or the resolution of such litigation. • New major contracts, orders, suppliers, customers or finance sources, or the loss thereof. • The pending introduction of major new products or the yet-to-be-publicized development of important new inventions. The above examples of material information are not exhaustive. Both positive and negative information can be material. Because trading that receives scrutiny will be evaluated after the fact with the benefit of hindsight, questions concerning the materiality of particular information should be resolved in favor of materiality, and trading should be avoided. Nonpublic Information. Nonpublic information is information that is not generally known or available to the public. Information is considered to be available to the public only when it has been released broadly to the marketplace (such as by a press release or an SEC filing) and the investing public has had time to absorb the information fully. As a general rule, information is considered nonpublic until the conclusion of the second full trading day after the information is broadly disseminated. For example, if the Company announces financial earnings before trading begins on a Tuesday, the first time you can buy or sell Company securities is the opening of the market on Thursday (assuming you are not aware of other material nonpublic information at that time). However, if the Company announces earnings after trading begins on that Tuesday, the first time you can buy or sell Company securities is the opening of the market on Friday. Additional Guidance The Company considers it inappropriate for those employed by or associated with the Company to engage in short-term or speculative transactions in the Company’s securities or in other transactions in the Company’s securities that may lead to inadvertent violations of the securities trading laws. Accordingly, your trading in Company securities is subject to the following: Short Sales. You may not engage in short sales of the Company’s securities (sales of securities that are not then owned), including a “sale against the box” (a sale with delayed delivery).
-7- Publicly Traded Options. You may not engage in transactions in publicly traded options in the Company’s securities, such as puts, calls and other derivative securities, on an exchange or in any other organized market. Standing Orders. Standing orders regarding the Company’s securities should be used only for a very brief period of time. A standing order placed with a broker to sell or purchase stock at a specified price leaves you with no control over the timing of the transaction. A standing order transaction executed by the broker when you are aware of material nonpublic information may result in unlawful securities trading. This prohibition does not apply to purchase and sales under a Rule 10b5-1 plan that is approved by the Legal Department. Rule 10b5-1 plans are discussed below. Margin Accounts and Pledges. Company securities held in a margin account or pledged as collateral for a loan may be sold without your consent by the broker if you fail to meet a margin call or by the lender in foreclosure if you default on the loan. Because a margin or foreclosure sale may occur at a time when you are aware of material nonpublic information or otherwise are not permitted to trade in Company securities, you are prohibited from holding Company securities in a margin account or pledging Company securities as collateral for a loan. Hedging. Certain forms of hedging or monetization transactions, such as zero-cost collars and forward sale contracts, involve the establishment of a short position in the Company’s securities and limit or eliminate your ability to profit from an increase in the value of the Company’s securities. When this occurs, you may no longer have the same interests and objectives as other stockholders of the Company. Therefore, you are prohibited from engaging in any hedging or monetization transactions involving Company securities. Rule 10b5-1 Trading Plans General. A Rule 10b5-1 trading plan is a written program for trading securities designed to gain the protections of the defenses against insider trading under Rule 10b5-1 of the Exchange Act. A plan of this type establishes parameters for purchases and/or sales of the Company’s securities by a broker or other independent fiduciary, or places discretion in another person who has no material, nonpublic information. Once the plan agreement is executed, the person who creates the trading plan retains no discretion over purchases or sales of the Company’s securities under the plan. This includes the amount of the securities being traded, the trading prices and the timing of the trades. For example, a trading plan may simply instruct a broker to sell 1,000 shares on the first of every month, or it may involve a complex trading formula. In order to be eligible to rely on the defenses under Rule 10b5-1, a person subject to this Policy must enter into a Rule 10b5-1 plan for transactions in the Company’s securities that meets certain conditions specified in Rule 10b5-1 (a “Rule 10b5-1 Plan”). If a plan meets the requirements of Rule 10b5-1, and is thus a Rule 10b5-1 Plan, securities of the Company may be purchased or sold within such plan without regard to certain insider trading restrictions. Pre-Approval. Because the rules governing trading plans can be complex, anyone considering entering into a Rule 10b5-1 Plan should first consult the Legal Department. All persons subject to this Policy must obtain the written pre-approval of the Legal Department prior to (i) adopting any new Rule 10b5-1 Plan or (ii) modifying, amending or terminating any existing Rule 10b5-1 Plan.
-8- By providing any such pre-approval, however, the Company does not incur any obligation to assure that the plan or other action approved complies with Rule 10b5-1 or assume any liability if it does not. Each director, officer, employee or consultant who adopts a Rule 10b5-1 Plan should consult with his or her own legal counsel. Mandatory Cooling-Off Periods. • Directors and Executive Officers. New Rule 10b5-1 Plans submitted by a director or executive officer, and amendments or modifications to an existing plan, must provide for transactions to occur no earlier than the later of the date that is (i) ninety (90) days after the effective date of the new plan, or amendment or modification to an existing plan, and (ii) two business days following the disclosure by the Company of its financial results in a Quarterly Report on Form 10-Q or Annual Report on Form 10-K covering the fiscal quarter in which the plan was adopted, amended or modified, provided that this mandatory cooling-off period shall not exceed one hundred twenty (120) days after adoption of the new plan, or amendment or modification to an existing plan. • All Other Persons. New Rule 10b5-1 Plans adopted by any person subject to this Policy, other than directors and executive officers, and amendments or modifications to an existing plan by such persons, must provide for transactions to occur no earlier than thirty (30) days after the effective date of the new plan, or amendment or modification to an existing plan. Good Faith Certification. All new Rule 10b5-1 Plans, and any amendments or modifications of an existing plan, must be entered into in good faith by the applicable person, and not as part of a plan or scheme to evade the prohibitions of Rule 10b-5, at a time when such person was not in possession of material nonpublic information about the Company. All directors and executive officers seeking to establish a new plan, or amend or modify an existing plan, will be required to provide a written representation to the Company certifying to that effect. Discretionary Authority. All new plans, and any modifications or amendments to an existing plan, must give a third party the discretionary authority to execute purchases and sales under the plan, on behalf of but outside the control of the person subject to this Policy, provided the third party does not possess any material nonpublic information about the Company. Alternatively, the plan must explicitly specify the security or securities to be purchased or sold, the number of shares, the prices and/or dates of transactions, or other formula(s) describing such transactions. Overlapping Plans. No person subject to this Policy may maintain more than one active plan at the same time, without the pre-approval of the Legal Department. Multiple overlapping plans may be approved by the Legal Department in limited circumstances as permitted under Rule 10b5-1. This restriction on multiple overlapping plans will not apply to a plan adopted solely and exclusively for the purpose of selling Company securities to satisfy a person’s tax obligations through a “sell-to-cover” method in connection with the vesting of equity awards (“Sell-to-Cover Plans”). Sales under Sell-to-Cover Plans must be strictly limited to the number of securities needed to cover such person’s tax obligations and the award holder may not be permitted to exercise control over the timing of such sales. This exemption does not apply to plans for sales incident to the exercise of option awards. Single-Trade Plans. Only one “single-trade plan” may be utilized by a person subject to this Policy in any twelve-month period. A single-trade plan is a Rule 10b5-1 Plan for the open market
-9- purchase or sale of the total amount of the securities subject to the plan as a single transaction. This restriction does not apply to Sell-to-Cover Plans. Post-Employment Transactions This Policy continues to apply to your transactions in Company securities even after you have ended employment or other services to the Company or a subsidiary as follows: if you are aware of material nonpublic information when your employment or service relationship ends, you may not trade in Company securities until that information has become public or is no longer material. Unauthorized Disclosure Maintaining the confidentiality of Company information is essential for competitive, security and other business reasons, as well as to comply with securities laws. You should treat all information you learn about the Company or its business plans in connection with your employment or service as confidential and proprietary to the Company. Inadvertent disclosure of confidential or inside information may expose the Company and you to significant risk of investigation and litigation. Disclosures to Outsiders. The timing and nature of the Company’s disclosure of material information to outsiders is subject to legal rules, the breach of which could result in substantial liability to you, the Company and its management. Also, individuals who talk directly to reporters without going through the proper channels risk providing incorrect information or revealing proprietary strategies. Accordingly, it is important that responses to inquiries about the Company by the press, investment analysts or others in the financial community be made on the Company’s behalf only through authorized individuals. Unless responding to such inquiries is among your specifically authorized responsibilities, you should politely refer all media representatives to the Vishay Precision Group’s Investor Relations Department. Disclosure to Company Personnel. You should consider the consequences of disclosure of material, nonpublic information even in discussions with Company personnel. For example, these individuals could be prohibited from trading in the Company’s securities until the information is publicly disclosed or, as a result of your communication, they could inadvertently engage in a violation of the securities laws or this Policy. Accordingly, even within the Company, you should restrict dissemination of material, nonpublic information on a need-to-know basis. Company Assistance Your compliance with this Policy is of the utmost importance both for you and for the Company. If you have any questions about this Policy or its application to any proposed transaction, you may obtain additional guidance from the Legal Department. Do not try to resolve uncertainties on your own, as the rules relating to securities trading are often complex, not always intuitive and carry severe consequences. Consequences of Violation Violation of the Policy may result in both civil and criminal penalties under applicable securities laws. You may also be subject to Company sanctions that could include termination of your relationship with the Company.
-10- * * * * * This Policy is amended on February 28, 2024.
SECURITIES TRADING POLICY FOR PERSONS OTHER THAN “COVERED PERSONS” CERTIFICATION To Vishay Precision Group, Inc.: I have received and read a copy of the Vishay Precision Group, Inc. Securities Trading Policy. I hereby agree to comply with the provisions of the Policy applicable to persons other than “Covered Persons” (as defined therein). (Name) (Signature) (Date)
Schedule I2 Covered Persons A. Directors and officers of the Company. B. Employees at the Vice President and Senior Director level and their direct reports. C. Regional, Corporate and Business Controllers, Corporate Finance Team and personnel working in the Legal and Investor Relations Departments of the Company. 2 Covered Persons should include any person and any person that holds a specific position or in a specific department that recurrently has access to inside information. Therefore, if all accounting personnel will be Covered Persons, this schedule will simply list “Accounting Department” and any individual in such department will be subject to the pre-clearance and blackout procedures outlined in this Policy.
Schedule II SECURITIES TRADING POLICY REGARDING PRE-CLEARANCE AND BLACKOUT PROCEDURES APPLICABLE TO “COVERED PERSONS” CERTIFICATION To Vishay Precision Group, Inc.: I have received and read a copy of the Vishay Precision Group, Inc. Securities Trading Policy, dated February 28, 2024 (the “Policy”). I hereby agree to comply with the requirements of the Policy, including the portion thereof relating to pre-clearance and blackout procedures. (Name) (Signature) (Date)
FORM OF EVENT-SPECIFIC BLACKOUT LETTER Date: , , CONFIDENTIAL Dear : Until further notice, you may not trade in any securities of the Company, as described under “Scope of Policy-Transactions Covered” in the Company’s Securities Trading Policy, dated February 28, 2024 (the “Policy”), previously delivered to you. You also may not inform anyone else of these restrictions on trading. These restrictions on trading do not apply to the exercise for cash of stock options granted to you by the Company. However, sale of stock received from an option exercise, including in a broker- assisted cashless exercise, is subject to the restrictions. In addition, these restrictions do not apply to the vesting of restricted stock, or the exercise of a tax withholding right pursuant to which you elect to have the Company withhold shares of stock to satisfy tax withholding requirements upon the vesting of any restricted stock. The restrictions do apply, however, to any market sale of restricted stock after it has vested. The restrictions also do not apply to trading under an approved Rule 10b5-1 Plan (as defined in the Policy), once any applicable cooling-off period has expired. Very truly yours, Name: Vishay Precision Group, Inc. Legal Department
EXHIBIT 21.1
SUBSIDIARIES OF THE REGISTRANT
Note: Name of Subsidiaries are indented under name of its parent. Subsidiaries are wholly owned unless otherwise noted. (Director's or other share required by statute in foreign jurisdictions and totaling less than 1% of equity are omitted).
| Vishay Precision Foil, Inc. | Delaware | ||||
| Vishay Precision Foil GmbH | Germany | ||||
| Vishay Measurements Group GmbH | Germany | ||||
| Powertron GmbH | Germany | ||||
| Nokra Optische Prüftechnik und Automation GmbH | Germany | ||||
| Vishay Measurements Group, Inc. | Delaware | ||||
Vishay Transducers, Ltd. (a) | Delaware | ||||
| Vishay Transducers India Private Limited | India | ||||
| Pharos de Costa Rica, S.A. | Costa Rica | ||||
| Vishay Celtron Technologies, Inc. | Taiwan | ||||
| Vishay Precision España S.L. | Spain | ||||
| Vishay Precision Asia Investments Pte., Ltd. | Singapore | ||||
| Vishay Precision Measurement Trading (Shanghai) Co., Ltd. | China | ||||
| Vishay Celtron (Tianjin) Technologies Co., Ltd. | China | ||||
| Vishay Precision Foil K.K. | Japan | ||||
| Alpha Electronics Corp. | Japan | ||||
| Pacific Instruments, Inc. | California | ||||
| DSI Holdings DE Inc. | Delaware | ||||
| Dynamic Systems Inc. | New York | ||||
| DSI Europe GmbH | Germany | ||||
| Diversified Technical Systems, Inc. | California | ||||
| Vishay Precision Israel Ltd. | Israel | ||||
| Vishay Measurements Group UK Ltd. | England and Wales | ||||
| Vishay Advanced Technologies Ltd. | Israel | ||||
| Vishay Precision Transducers India Private Limited | India | ||||
| Vishay Measurements Group France S.A.S. | France | ||||
| SCI Vijafranc | France | ||||
| VPG Systems UK, Ltd. | England and Wales | ||||
| Vishay Precision Group Canada ULC | Canada | ||||
| Vishay PM Onboard (Ireland) Limited | Ireland | ||||
| Vishay PME France SARL | France | ||||
| Vishay PM Onboard Limited | England and Wales | ||||
| Vishay Nobel AB | Sweden | ||||
| Vishay Nobel AS | Norway | ||||
| VPG Technology Development Ltd. | Israel | ||||
(a) Registrant has a direct ownership interest of 62% in Vishay Transducers, Ltd.
CONSENT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM We consent to the incorporation by reference in Registration Statement Nos. 333-187211 and 333- 265228 on Form S-8 of our reports dated February 25, 2025, relating to the financial statements of Vishay Precision Group, Inc. (the "Company") and the effectiveness of the Company’s internal control over financial reporting appearing in this Annual Report on Form 10-K for the year ended December 31, 2024. /s/ Brightman Almagor Zohar & Co. Brightman Almagor Zohar & Co. Certified Public Accountants A Firm in the Deloitte Global Network Tel Aviv, Israel February 25, 2025
EXHIBIT 31.1
CERTIFICATION PURSUANT TO SECTION 302 OF THE SARBANES-OXLEY ACT OF 2002
I, Ziv Shoshani, certify that:
1.I have reviewed this Form 10-K of Vishay Precision Group, Inc.;
2.Based on my knowledge, this report does not contain any untrue statement of a material fact or omit to state a material fact necessary to make the statements made, in light of the circumstances under which such statements were made, not misleading with respect to the period covered by this report;
3.Based on my knowledge, the financial statements, and other financial information included in this report, fairly present in all material respects the financial condition, results of operations and cash flows of the registrant as of, and for, the periods presented in this report;
4.The registrant’s other certifying officer and I are responsible for establishing and maintaining disclosure controls and procedures (as defined in Exchange Act Rules 13a-15(e) and 15d-15(e)) and internal control over financial reporting (as defined in Exchange Act Rules 13-15(f) and 15d-15(f)) for the registrant and have:
a.Designed such disclosure controls and procedures, or caused such disclosure controls and procedures to be designed under our supervision, to ensure that material information relating to the registrant, including its consolidated subsidiaries, is made known to us by others within those entities, particularly during the period in which this report is being prepared;
b.Designed such internal control over financial reporting, or caused such internal control over financial reporting to be designed under our supervision, to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles;
c.Evaluated the effectiveness of the registrant’s disclosure controls and procedures and presented in this report our conclusions about the effectiveness of the disclosure controls and procedures, as of the end of the period covered by this report based on such evaluation; and
d.Disclosed in this report any change in the registrant’s internal control over financial reporting that occurred during the registrant’s most recent fiscal quarter (the registrant’s fourth fiscal quarter in the case of an annual report) that has materially affected, or is reasonably likely to materially affect, the registrant’s internal control over financial reporting; and
5.The registrant’s other certifying officer and I have disclosed, based on our most recent evaluation of internal control over financial reporting, to the registrant’s auditors and the audit committee of registrant’s Board of Directors (or persons performing the equivalent functions):
a.All significant deficiencies and material weaknesses in the design or operation of internal control over financial reporting which are reasonably likely to adversely affect the registrant’s ability to record, process, summarize and report financial information; and
b.Any fraud, whether or not material, that involves management or other employees who have a significant role in the registrant’s internal control over financial reporting.
| Dated: February 25, 2025 | /s/ Ziv Shoshani | |||||||
| Ziv Shoshani | ||||||||
| Chief Executive Officer | ||||||||
EXHIBIT 31.2
CERTIFICATION PURSUANT TO SECTION 302 OF THE SARBANES-OXLEY ACT OF 2002
I, William M. Clancy, certify that:
1. I have reviewed this Form 10-K of Vishay Precision Group, Inc.;
2.Based on my knowledge, this report does not contain any untrue statement of a material fact or omit to state a material fact necessary to make the statements made, in light of the circumstances under which such statements were made, not misleading with respect to the period covered by this report;
3.Based on my knowledge, the financial statements, and other financial information included in this report, fairly present in all material respects the financial condition, results of operations and cash flows of the registrant as of, and for, the periods presented in this report;
4.The registrant’s other certifying officer and I are responsible for establishing and maintaining disclosure controls and procedures (as defined in Exchange Act Rules 13a-15(e) and 15d-15(e)) and internal control over financial reporting (as defined in Exchange Act Rules 13-15(f) and 15d-15(f)) for the registrant and have:
(a)Designed such disclosure controls and procedures, or caused such disclosure controls and procedures to be designed under our supervision, to ensure that material information relating to the registrant, including its consolidated subsidiaries, is made known to us by others within those entities, particularly during the period in which this report is being prepared;
(b)Designed such internal control over financial reporting, or caused such internal control over financial reporting to be designed under our supervision, to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles;
(c)Evaluated the effectiveness of the registrant’s disclosure controls and procedures and presented in this report our conclusions about the effectiveness of the disclosure controls and procedures, as of the end of the period covered by this report based on such evaluation; and
(d)Disclosed in this report any change in the registrant’s internal control over financial reporting that occurred during the registrant’s most recent fiscal quarter (the registrant’s fourth fiscal quarter in the case of an annual report) that has materially affected, or is reasonably likely to materially affect, the registrant’s internal control over financial reporting; and
5.The registrant’s other certifying officer and I have disclosed, based on our most recent evaluation of internal control over financial reporting, to the registrant’s auditors and the audit committee of registrant’s Board of Directors (or persons performing the equivalent functions):
(a)All significant deficiencies and material weaknesses in the design or operation of internal control over financial reporting which are reasonably likely to adversely affect the registrant’s ability to record, process, summarize and report financial information; and
(b)Any fraud, whether or not material, that involves management or other employees who have a significant role in the registrant’s internal control over financial reporting.
| Dated: February 29, 2024 | /s/ William M. Clancy | |||||||
| William M. Clancy | ||||||||
| Chief Financial Officer | ||||||||
EXHIBIT 32.1
CERTIFICATION PURSUANT TO
18 U.S.C. SECTION 1350,
AS ADOPTED PURSUANT TO
SECTION 906 OF THE SARBANES-OXLEY ACT OF 2002
In connection with the Annual Report of Vishay Precision Group, Inc. (the “Company”) on Form 10-K for the fiscal year ended December 31, 2024 as filed with the Securities and Exchange Commission on the date hereof (the “Report”), I, Ziv Shoshani, Chief Executive Officer of the Company, certify, pursuant to 18 U.S.C. section 1350, as adopted pursuant to section 906 of the Sarbanes-Oxley Act of 2002, that:
(1)The Report fully complies with the requirements of section 13(a) or 15(d) of the Securities Exchange Act of 1934; and
(2)The information contained in the Report fairly presents, in all material respects, the financial condition and results of operations of the Company.
| Dated: February 25, 2025 | /s/ Ziv Shoshani | |||||||
| Ziv Shoshani | ||||||||
| Chief Executive Officer | ||||||||
EXHIBIT 32.2
CERTIFICATION PURSUANT TO
18 U.S.C. SECTION 1350,
AS ADOPTED PURSUANT TO
SECTION 906 OF THE SARBANES-OXLEY ACT OF 2002
In connection with the Annual Report of Vishay Precision Group, Inc. (the “Company”) on Form 10-K for the fiscal year ended December 31, 2023 as filed with the Securities and Exchange Commission on the date hereof (the “Report”), I, William M. Clancy, Chief Financial Officer of the Company, certify, pursuant to 18 U.S.C. section 1350, as adopted pursuant to section 906 of the Sarbanes-Oxley Act of 2002, that:
(1)The Report fully complies with the requirements of section 13(a) or 15(d) of the Securities Exchange Act of 1934; and
(2)The information contained in the Report fairly presents, in all material respects, the financial condition and results of operations of the Company.
| Dated: February 29, 2024 | /s/ William M. Clancy | |||||||
| William M. Clancy | ||||||||
| Chief Financial Officer | ||||||||
Exhibit 97.1
VISHAY PRECISION GROUP, INC.
DODD-FRANK CLAWBACK POLICY
The Compensation Committee (the “Compensation Committee”) of the Board of Directors (the “Board”) of Vishay Precision Group, Inc., a Delaware corporation (the “Company”) has adopted the following Dodd-Frank Clawback Policy (this “Policy”) on November 30, 2023, effective as of October 2, 2023 (the “Effective Date”).
1.Purpose. The purpose of this Policy is to provide for the recoupment of certain incentive compensation pursuant to Section 954 of the Dodd-Frank Wall Street Reform and Consumer Protection Act of 2010, in the manner required by Section 10D of the Securities Exchange Act of 1934, as amended (the “Exchange Act”), Rule 10D-1 promulgated thereunder, and the Applicable Listing Standards (as defined below) (collectively, the “Dodd-Frank Rules”).
2.Administration. This Policy shall be administered by the Compensation Committee. Any determinations made by the Compensation Committee shall be final and binding on all affected individuals.
3.Definitions. For purposes of this Policy, the following capitalized terms shall have the meanings set forth below.
(a)“Accounting Restatement” shall mean an accounting restatement of the Company’s financial statements due to the material noncompliance of the Company with any financial reporting requirement under the securities laws, including any required accounting restatement (i) to correct an error in previously issued financial statements that is material to the previously issued financial statements (i.e., a “Big R” restatement), or (ii) that would result in a material misstatement if the error were corrected in the current period or left uncorrected in the current period (i.e., a “little r” restatement).
(b)“Affiliate” shall mean each entity that directly or indirectly controls, is controlled by, or is under common control with the Company.
(c)“Applicable Exchange” shall mean (i) The Nasdaq Stock Market, if the Company’s securities are listed on such national stock exchange, or (ii) the New York Stock Exchange, if the Company’s securities are listed on such national stock exchange.
(d)“Applicable Listing Standards” shall mean (i) Nasdaq Listing Rule 5608, if the Company’s securities are listed on The Nasdaq Stock Market, or (ii) Section 303A.14 of the New York Stock Exchange Listed Company Manual, if the Company’s securities are listed on the New York Stock Exchange.
(e)“Clawback Eligible Incentive Compensation” shall mean Incentive-Based Compensation Received by a Covered Executive (i) on or after the Effective Date, (ii) after beginning service as a Covered Executive, (iii) if such individual served as a Covered Executive at any time during the performance period for such Incentive-Based Compensation (irrespective of whether such individual continued to serve as a Covered Executive upon or following the Restatement Trigger Date), (iv) while the Company has a class of securities listed on a national securities exchange or a national securities association, and (v) during the applicable Clawback Period. For the avoidance of doubt, Incentive-Based Compensation Received by a Covered Executive on or after the Effective Date could, by the terms of this Policy, include amounts approved, awarded, or granted prior to such date.
(f)“Clawback Period” shall mean, with respect to any Accounting Restatement, the three completed fiscal years of the Company immediately preceding the Restatement Trigger Date and any transition period (that results from a change in the Company’s fiscal year) within or immediately following those three completed fiscal years (except that a transition period between the last day of the Company’s previous fiscal year end and the first day of its new fiscal year that comprises a period of at least nine months shall count as a completed fiscal year).
(g)“Company Group” shall mean the Company and its Affiliates.
(h)“Covered Executive” shall mean any “executive officer” of the Company as defined under the Dodd-Frank Rules, and, for the avoidance of doubt, includes each individual identified as an executive officer of the Company in accordance with Item 401(b) of Regulation S-K under the Exchange Act.
(i)“Erroneously Awarded Compensation” shall mean the amount of Clawback Eligible Incentive Compensation that exceeds the amount of Incentive-Based Compensation that otherwise would have been Received had it been determined based on the restated amounts, computed without regard to any taxes paid. With respect to any compensation plan or program that takes into account Incentive-Based Compensation, the amount contributed to a notional account that exceeds the amount that otherwise would have been contributed had it been determined based on the restated amount, computed without regard to any taxes paid, shall be considered Erroneously Awarded Compensation, along with earnings accrued on that notional amount.
(j)“Financial Reporting Measures” shall mean measures that are determined and presented in accordance with the accounting principles used in preparing the Company’s financial statements, and all other measures that are derived wholly or in part from such measures. Stock price and total shareholder return (and any measures that are derived wholly or in part from stock price or total shareholder return) shall for purposes of this Policy be considered Financial Reporting Measures. For the avoidance of doubt, a measure need not be presented in the Company’s financial statements or included in a filing with the U.S. Securities and Exchange Commission (the “SEC”) in order to be considered a Financial Reporting Measure.
(k)“Incentive-Based Compensation” shall mean any compensation that is granted, earned or vested based wholly or in part upon the attainment of a Financial Reporting Measure.
(l)“Received” shall mean the deemed receipt of Incentive-Based Compensation. Incentive-Based Compensation shall be deemed received for this purpose in the Company’s fiscal period during which the Financial Reporting Measure specified in the applicable Incentive-Based Compensation award is attained, even if payment or grant of the Incentive-Based Compensation occurs after the end of that period.
(m)“Restatement Trigger Date” shall mean the earlier to occur of (i) the date the Board, a committee of the Board, or the officer(s) of the Company authorized to take such action if Board action is not required, concludes, or reasonably should have concluded, that the Company is required to prepare an Accounting Restatement, or (ii) the date a court, regulator or other legally authorized body directs the Company to prepare an Accounting Restatement.
4.Recoupment of Erroneously Awarded Compensation. Upon the occurrence of a Restatement Trigger Date, the Company shall recoup Erroneously Awarded Compensation reasonably promptly, in the manner described below. For the avoidance of doubt, the Company’s obligation to recover Erroneously Awarded Compensation under this Policy is not dependent on if or when restated financial statements are filed following the Restatement Trigger Date.
-2-
(a)Process. The Compensation Committee shall use the following process for recoupment:
(i)First, the Compensation Committee will determine the amount of any Erroneously Awarded Compensation for each Covered Executive in connection with such Accounting Restatement. For Incentive-Based Compensation based on (or derived from) stock price or total shareholder return where the amount of Erroneously Awarded Compensation is not subject to mathematical recalculation directly from the information in the applicable Accounting Restatement, the amount shall be determined by the Compensation Committee based on a reasonable estimate of the effect of the Accounting Restatement on the stock price or total shareholder return upon which the Incentive-Based Compensation was Received (in which case, the Company shall maintain documentation of such determination of that reasonable estimate and provide such documentation to the Applicable Exchange).
(ii)Second, the Compensation Committee will provide each affected Covered Executive with a written notice stating the amount of the Erroneously Awarded Compensation, a demand for recoupment, and the means of recoupment that the Company will accept.
(b)Means of Recoupment. The Compensation Committee shall have discretion to determine the appropriate means of recoupment of Erroneously Awarded Compensation, which may include without limitation: (i) recoupment of cash or shares of Company stock, (ii) forfeiture of unvested cash or equity awards (including those subject to service-based and/or performance-based vesting conditions), (iii) cancellation of outstanding vested cash or equity awards (including those for which service-based and/or performance-based vesting conditions have been satisfied), (iv) to the extent consistent with Section 409A of the Internal Revenue Code of 1986, as amended (“Section 409A”), offset of other amounts owed to the Covered Executive or forfeiture of deferred compensation, (v) reduction of future compensation, and (vi) any other remedial or recovery action permitted by law. Notwithstanding the foregoing, the Company Group makes no guarantee as to the treatment of such amounts under Section 409A, and shall have no liability with respect thereto. For the avoidance of doubt, appropriate means of recoupment pursuant to this Section 4(b) may include amounts approved, awarded, or granted prior to the Effective Date. Except as set forth in Section 4(d) below, in no event may the Company Group accept an amount that is less than the amount of Erroneously Awarded Compensation in satisfaction of a Covered Executive’s obligations hereunder.
(c)Failure to Repay. To the extent that a Covered Executive fails to repay all Erroneously Awarded Compensation to the Company Group when due (as determined in accordance with Section 4(a) above), the Company shall, or shall cause one or more other members of the Company Group to, take all actions reasonable and appropriate to recoup such Erroneously Awarded Compensation from the applicable Covered Executive. The applicable Covered Executive shall be required to reimburse the Company Group for any and all expenses reasonably incurred (including legal fees) by the Company Group in recouping such Erroneously Awarded Compensation.
(d)Exceptions. Notwithstanding anything herein to the contrary, the Company shall not be required to recoup Erroneously Awarded Compensation if one of the following conditions is met and the Compensation Committee determines that recoupment would be impracticable:
(i)The direct expense paid to a third party to assist in enforcing this Policy against a Covered Executive would exceed the amount to be recouped, after the Company has made a reasonable attempt to recoup the applicable Erroneously Awarded Compensation, documented such attempts, and provided such documentation to the Applicable Exchange;
-3-
(ii)Recoupment would violate home country law where that law was adopted prior to November 28, 2022, provided that, before determining that it would be impracticable to recoup any amount of Erroneously Awarded Compensation based on violation of home country law, the Company has obtained an opinion of home country counsel, acceptable to the Applicable Exchange, that recoupment would result in such a violation and a copy of the opinion is provided to the Applicable Exchange; or
(iii)Recoupment would likely cause an otherwise tax-qualified retirement plan, under which benefits are broadly available to employees, to fail to meet the requirements of 26 U.S.C. 401(a)(13) or 26 U.S.C. 411(a) and regulations thereunder.
5.Reporting and Disclosure. The Company shall file all disclosures with respect to this Policy in accordance with the requirements of the Dodd-Frank Rules.
6.Indemnification Prohibition. No member of the Company Group shall be permitted to indemnify any current or former Covered Executive against (i) the loss of any Erroneously Awarded Compensation that is recouped pursuant to the terms of this Policy, or (ii) any claims relating to the Company Group’s enforcement of its rights under this Policy. The Company may not pay or reimburse any Covered Executive for the cost of third-party insurance purchased by a Covered Executive to fund potential recoupment obligations under this Policy.
7.Acknowledgment. If required by the Compensation Committee, each Covered Executive shall be required to sign and return to the Company the acknowledgement form attached hereto as Exhibit A (or such other acknowledgement form authorized by the Compensation Committee) pursuant to which such Covered Executive will agree to be bound by the terms of, and comply with, this Policy. However, for the avoidance of doubt, each Covered Executive will be fully bound by, and must comply with, the Policy, whether or not such Covered Executive has executed and returned an acknowledgment form to the Company.
8.Interpretation. The Compensation Committee is authorized to interpret and construe this Policy and to make all determinations necessary, appropriate, or advisable for the administration of this Policy. The Compensation Committee intends that this Policy be interpreted consistent with the Dodd-Frank Rules.
9.Amendment; Termination. The Compensation Committee may amend or terminate this Policy from time to time in its discretion, including as and when it determines that it is legally required to do so by any federal securities laws, SEC rule or the rules of any national securities exchange or national securities association on which the Company’s securities are listed.
10.Other Recoupment Rights. The Compensation Committee intends that this Policy be applied to the fullest extent of the law. The Compensation Committee may require that any employment agreement, equity award, cash incentive award, or any other agreement entered into be conditioned upon the Covered Executive’s agreement to abide by the terms of this Policy. Any right of recoupment under this Policy is in addition to, and not in lieu of, any other remedies or rights of recoupment that may be available to the Company Group, whether arising under applicable law, regulation or rule, pursuant to the terms of any other policy of the Company Group, pursuant to any employment agreement, equity or compensatory plan, equity award, cash incentive award, or other agreement applicable to a Covered Executive, or otherwise (the “Separate Clawback Rights”). Notwithstanding the foregoing, this Policy replaces and supersedes the Company’s previous Clawback Policy, but only with respect to Incentive-Based Compensation Received on or after the Effective Date. There shall be no duplication of recovery of the same Erroneously Awarded Compensation under this Policy and the Separate Clawback Rights, unless required by applicable law.
-4-
11.Successors. This Policy shall be binding and enforceable against all Covered Executives and their beneficiaries, heirs, executors, administrators or other legal representatives.
-5-
Exhibit A
VISHAY PRECISION GROUP, INC. DODD-FRANK CLAWBACK POLICY
ACKNOWLEDGEMENT FORM
By signing below, the undersigned acknowledges and confirms that the undersigned has received and reviewed a copy of the Vishay Precision Group, Inc. Dodd-Frank Clawback Policy (the “Policy”). Capitalized terms used but not otherwise defined in this Acknowledgement Form (this “Acknowledgement Form”) shall have the meanings ascribed to such terms in the Policy.
By signing this Acknowledgement Form, the undersigned acknowledges and agrees that the undersigned is and will continue to be subject to the Policy and that the Policy will apply both during and after the undersigned’s employment with the Company Group. Further, by signing below, the undersigned agrees to abide by the terms of the Policy.
Sign: _____________________________
Name: [Employee]
Date: _____________________________
A-1