Ambarella Inc 10-Q for FY2025 Q1
Ambarella Inc (AMBA)
About this 10-Q
Ambarella Inc filed this 10-Q on June 6, 2024, covering the quarter ended April 30, 2024 (FY2025 Q1).
Headline figures
Quarter ended April 30, 2024, as reported in this filing, compared with the same period a year earlier where the filing states it.
- Revenue
- $54.47M
- down 12.3% from $62.14M a year earlier
- Net loss
- $37.93M
- compared with a net loss of $35.9M a year earlier
- Diluted EPS
- -$0.93
- compared with -$0.91 a year earlier
UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549
Form
(Mark One)
|
QUARTERLY REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934 |
For the quarterly period ended
OR
|
TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934 |
For the transition period from to ______
Commission file number:
(Exact name of registrant as specified in its charter)
|
||
(State or other jurisdiction of incorporation or organization) |
|
(I.R.S. Employer Identification No.) |
|
|
|
|
||
(Address of principal executive offices) |
|
(Zip Code) |
(
(Registrant’s telephone number, including area code)
Securities registered pursuant to Section 12(b) of the Act:
Title of each class |
Trading Symbol |
Name of each exchange on which registered |
Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.
Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files).
Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company, or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company,” and “emerging growth company” in Rule 12b-2 of the Exchange Act.
|
☒ |
|
Accelerated filer |
|
☐ |
|
|
|
|
|
|||
Non-accelerated filer |
|
☐ |
|
Smaller reporting company |
|
|
|
|
|
|
|
|
|
Emerging growth company |
|
|
|
|
|
|
If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐
Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes ☐ No
The number of ordinary shares of the Registrant outstanding as of May 31, 2024 was
AMBARELLA, INC.
QUARTERLY REPORT ON FORM 10-Q
TABLE OF CONTENTS
|
Page |
||
|
|
|
|
|
3 |
||
|
|
|
|
Item 1. |
|
3 |
|
|
|
|
|
|
Unaudited Condensed Consolidated Balance Sheets at April 30, 2024 and January 31, 2024 |
|
3 |
|
|
|
|
|
|
4 |
|
|
|
|
|
|
|
5 |
|
|
|
|
|
|
|
6 |
|
|
|
|
|
|
|
7 |
|
|
|
|
|
|
Notes to Unaudited Condensed Consolidated Financial Statements |
|
8 |
|
|
|
|
Item 2. |
Management’s Discussion and Analysis of Financial Condition and Results of Operations |
|
19 |
|
|
|
|
Item 3. |
|
26 |
|
|
|
|
|
Item 4. |
|
27 |
|
|
|
|
|
|
27 |
||
|
|
|
|
Item 1. |
|
28 |
|
|
|
|
|
Item 1A. |
|
28 |
|
|
|
|
|
Item 5. |
|
58 |
|
|
|
|
|
Item 6. |
|
58 |
|
|
|
|
|
|
60 |
||
2
PART I – FINANCIAL INFORMATION
ITEM 1. Financial Statements
AMBARELLA, INC.
CONDENSED CONSOLIDATED BALANCE SHEETS
(in thousands, except share and per share data)
(unaudited)
|
|
As of |
|
|||||
|
|
April 30, |
|
|
January 31, |
|
||
|
|
2024 |
|
|
2024 |
|
||
ASSETS |
|
|
|
|
|
|
||
Current assets: |
|
|
|
|
|
|
||
Cash and cash equivalents |
|
$ |
|
|
$ |
|
||
Marketable debt securities |
|
|
|
|
|
|
||
Accounts receivable, net |
|
|
|
|
|
|
||
Inventories |
|
|
|
|
|
|
||
Restricted cash |
|
|
|
|
|
|
||
Prepaid expenses and other current assets |
|
|
|
|
|
|
||
Total current assets |
|
|
|
|
|
|
||
Property and equipment, net |
|
|
|
|
|
|
||
Deferred tax assets |
|
|
|
|
|
|
||
Intangible assets, net |
|
|
|
|
|
|
||
Operating lease right-of-use assets, net |
|
|
|
|
|
|
||
Goodwill |
|
|
|
|
|
|
||
Other non-current assets |
|
|
|
|
|
|
||
Total assets |
|
$ |
|
|
$ |
|
||
LIABILITIES AND SHAREHOLDERS' EQUITY |
|
|
|
|
|
|
||
Current liabilities: |
|
|
|
|
|
|
||
Accounts payable |
|
|
|
|
|
|
||
Accrued and other current liabilities |
|
|
|
|
|
|
||
Operating lease liabilities, current |
|
|
|
|
|
|
||
Income taxes payable |
|
|
|
|
|
|
||
Deferred revenue, current |
|
|
|
|
|
|
||
Total current liabilities |
|
|
|
|
|
|
||
Operating lease liabilities, non-current |
|
|
|
|
|
|
||
Other long-term liabilities |
|
|
|
|
|
|
||
Total liabilities |
|
|
|
|
|
|
||
|
|
|
|
|
|
|||
Shareholders' equity: |
|
|
|
|
|
|
||
Preference shares, $ |
|
|
|
|
|
|
||
Ordinary shares, $ |
|
|
|
|
|
|
||
Additional paid-in capital |
|
|
|
|
|
|
||
Accumulated other comprehensive loss |
|
|
( |
) |
|
|
( |
) |
Accumulated deficit |
|
|
( |
) |
|
|
( |
) |
Total shareholders’ equity |
|
|
|
|
|
|
||
Total liabilities and shareholders' equity |
|
$ |
|
|
$ |
|
||
See accompanying notes to condensed consolidated financial statements.
3
AMBARELLA, INC.
CONDENSED CONSOLIDATED STATEMENTS OF OPERATIONS
(in thousands, except share and per share data)
(unaudited)
|
|
Three Months Ended April 30, |
|
|||||
|
|
2024 |
|
|
2023 |
|
||
Revenue |
|
$ |
|
|
$ |
|
||
Cost of revenue |
|
|
|
|
|
|
||
Gross profit |
|
|
|
|
|
|
||
Operating expenses: |
|
|
|
|
|
|
||
Research and development |
|
|
|
|
|
|
||
Selling, general and administrative |
|
|
|
|
|
|
||
Total operating expenses |
|
|
|
|
|
|
||
Loss from operations |
|
|
( |
) |
|
|
( |
) |
Other income, net |
|
|
|
|
|
|
||
Loss before income taxes |
|
|
( |
) |
|
|
( |
) |
Provision for income taxes |
|
|
|
|
|
|
||
Net loss |
|
$ |
( |
) |
|
$ |
( |
) |
Net loss per share attributable to ordinary shareholders: |
|
|
|
|
|
|
||
Basic |
|
$ |
( |
) |
|
$ |
( |
) |
Diluted |
|
$ |
( |
) |
|
$ |
( |
) |
Weighted-average shares used to compute net loss per share attributable to ordinary shareholders: |
|
|
|
|
|
|
||
Basic |
|
|
|
|
|
|
||
Diluted |
|
|
|
|
|
|
||
See accompanying notes to condensed consolidated financial statements.
4
AMBARELLA, INC.
CONDENSED CONSOLIDATED STATEMENTS OF COMPREHENSIVE LOSS
(unaudited, in thousands)
|
|
Three Months Ended April 30, |
|
|||||
|
|
2024 |
|
|
2023 |
|
||
Net loss |
|
$ |
( |
) |
|
$ |
( |
) |
Other comprehensive income (loss), net of tax: |
|
|
|
|
|
|
||
Net unrealized gains (losses) on investments |
|
|
( |
) |
|
|
|
|
Other comprehensive income (loss), net of tax |
|
|
( |
) |
|
|
|
|
Comprehensive loss |
|
$ |
( |
) |
|
$ |
( |
) |
See accompanying notes to condensed consolidated financial statements.
5
AMBARELLA, INC.
(in thousands, except share data)
(unaudited)
|
|
|
|
|
|
|
|
|
|
|
Accumulated |
|
|
|
|
|
|
|
||||||
|
|
Outstanding |
|
|
Additional |
|
|
Other |
|
|
|
|
|
|
|
|||||||||
|
|
Ordinary Shares |
|
|
Paid-in |
|
|
Comprehensive |
|
|
Retained Earnings |
|
|
|
|
|||||||||
|
|
Shares |
|
|
Amount |
|
|
Capital |
|
|
Loss |
|
|
(Accumulated Deficit) |
|
|
Total |
|
||||||
Balance--January 31, 2024 |
|
|
|
|
$ |
|
|
$ |
|
|
$ |
( |
) |
|
$ |
( |
) |
|
$ |
|
||||
Issuance of shares through employee equity plans |
|
|
|
|
|
|
|
|
|
|
|
— |
|
|
|
— |
|
|
|
|
||||
Issuance of shares through employee stock purchase plan |
|
|
|
|
|
|
|
|
|
|
|
— |
|
|
|
— |
|
|
|
|
||||
Stock-based compensation expense |
|
|
— |
|
|
|
— |
|
|
|
|
|
|
— |
|
|
|
— |
|
|
|
|
||
Other comprehensive loss - net of tax |
|
|
— |
|
|
|
— |
|
|
|
— |
|
|
|
( |
) |
|
|
— |
|
|
|
( |
) |
Net loss |
|
|
— |
|
|
|
— |
|
|
|
— |
|
|
|
— |
|
|
|
( |
) |
|
|
( |
) |
Balance--April 30, 2024 |
|
|
|
|
$ |
|
|
$ |
|
|
$ |
( |
) |
|
$ |
( |
) |
|
$ |
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||
|
|
|
|
|
|
|
|
|
|
|
Accumulated |
|
|
|
|
|
|
|
||||||
|
|
Outstanding |
|
|
Additional |
|
|
Other |
|
|
|
|
|
|
|
|||||||||
|
|
Ordinary Shares |
|
|
Paid-in |
|
|
Comprehensive |
|
|
Retained Earnings |
|
|
|
|
|||||||||
|
|
Shares |
|
|
Amount |
|
|
Capital |
|
|
Loss |
|
|
(Accumulated Deficit) |
|
|
Total |
|
||||||
Balance--January 31, 2023 |
|
|
|
|
$ |
|
|
$ |
|
|
$ |
( |
) |
|
$ |
|
|
$ |
|
|||||
Issuance of shares through employee equity plans |
|
|
|
|
|
|
|
|
|
|
|
— |
|
|
|
— |
|
|
|
|
||||
Issuance of shares through employee stock purchase plan |
|
|
|
|
|
|
|
|
|
|
|
— |
|
|
|
— |
|
|
|
|
||||
Stock-based compensation expense |
|
|
— |
|
|
|
— |
|
|
|
|
|
|
— |
|
|
|
— |
|
|
|
|
||
Other comprehensive gain - net of tax |
|
|
— |
|
|
|
— |
|
|
|
— |
|
|
|
|
|
|
— |
|
|
|
|
||
Net loss |
|
|
— |
|
|
|
— |
|
|
|
— |
|
|
|
— |
|
|
|
( |
) |
|
|
( |
) |
Balance--April 30, 2023 |
|
|
|
|
$ |
|
|
$ |
|
|
$ |
( |
) |
|
$ |
( |
) |
|
$ |
|
||||
See accompanying notes to condensed consolidated financial statements.
6
AMBARELLA, INC.
CONDENSED CONSOLIDATED STATEMENTS OF CASH FLOWS
(unaudited, in thousands)
|
|
Three Months Ended April 30, |
|
|||||
|
|
2024 |
|
|
2023 |
|
||
Cash flows from operating activities: |
|
|
|
|
|
|
||
Net loss |
|
$ |
( |
) |
|
$ |
( |
) |
Adjustments to reconcile net loss to net cash provided by (used in) operating activities: |
|
|
|
|
|
|
||
Depreciation and amortization |
|
|
|
|
|
|
||
Amortization (accretion) of premium (discount) on marketable debt securities, net |
|
|
( |
) |
|
|
( |
) |
Stock-based compensation |
|
|
|
|
|
|
||
Deferred income taxes |
|
|
|
|
|
|
||
Other non-cash items, net |
|
|
|
|
|
|
||
Changes in operating assets and liabilities: |
|
|
|
|
|
|
||
Accounts receivable |
|
|
( |
) |
|
|
|
|
Inventories |
|
|
|
|
|
( |
) |
|
Prepaid expenses and other current assets |
|
|
( |
) |
|
|
( |
) |
Other non-current assets |
|
|
( |
) |
|
|
|
|
Accounts payable |
|
|
( |
) |
|
|
|
|
Accrued and other current liabilities |
|
|
|
|
|
( |
) |
|
Income taxes payable |
|
|
( |
) |
|
|
( |
) |
Deferred revenue |
|
|
|
|
|
( |
) |
|
Operating lease liabilities |
|
|
( |
) |
|
|
( |
) |
Other long-term liabilities |
|
|
|
|
|
|
||
Net cash provided by (used in) operating activities |
|
|
( |
) |
|
|
|
|
Cash flows from investing activities: |
|
|
|
|
|
|
||
Purchase of investments |
|
|
( |
) |
|
|
( |
) |
Sales of investments |
|
|
|
|
|
|
||
Maturities of investments |
|
|
|
|
|
|
||
Purchase of tangible and intangible assets |
|
|
( |
) |
|
|
( |
) |
Net cash provided by (used in) investing activities |
|
|
|
|
|
( |
) |
|
Cash flows from financing activities: |
|
|
|
|
|
|
||
Proceeds from exercise of stock options and employee stock purchase plan |
|
|
|
|
|
|
||
Long-term financing payment for intangible assets |
|
|
( |
) |
|
|
( |
) |
Net cash provided by (used in) financing activities |
|
|
( |
) |
|
|
|
|
Net increase (decrease) in cash, cash equivalents and restricted cash |
|
|
( |
) |
|
|
|
|
Cash, cash equivalents and restricted cash at beginning of period |
|
|
|
|
|
|
||
Cash, cash equivalents and restricted cash at end of period |
|
$ |
|
|
$ |
|
||
Supplemental disclosure of cash flow information: |
|
|
|
|
|
|
||
Cash paid for income taxes |
|
$ |
|
|
$ |
|
||
Supplemental disclosure of noncash investing activities: |
|
|
|
|
|
|
||
Unpaid liabilities related to tangible and intangible assets purchases |
|
$ |
|
|
$ |
|
||
See accompanying notes to condensed consolidated financial statements.
7
AMBARELLA, INC.
Notes to Condensed Consolidated Financial Statements
(Unaudited)
1. Organization and Summary of Significant Accounting Policies
Organization
Ambarella, Inc. (the Company) was incorporated in the Cayman Islands on January 15, 2004. The Company is a leading developer of low-power semiconductor solutions offering high-definition (HD) and Ultra HD compression, advanced image signal processing, and powerful artificial intelligence (AI) processing. The Company combines its processor design capabilities with its expertise in video and image processing, algorithms and software to provide a technology platform that is designed to be easily scalable across multiple applications and enable rapid and efficient product development. The Company’s system-on-a-chip, or SoC, designs fully integrate high-definition video processing, image processing, AI computer vision algorithms, audio processing and system functions onto a single chip. These low power SoCs deliver exceptional video and image quality and can extract valuable data from high-resolution video and radar streams. The Company is currently addressing a broad range of human and computer vision applications, including video security, advanced driver assistance systems (ADAS), electronic mirrors, drive recorders, driver/cabin monitoring systems, autonomous driving, and industrial and robotic applications.
The Company sells its solutions to leading original equipment manufacturers, or OEMs, who include the Company’s SoCs in their products, and original design manufacturers, or ODMs, who include the Company’s SoCs in the products that they supply to OEMs, globally.
Basis of Presentation
The accompanying unaudited condensed consolidated financial statements have been prepared by the Company in accordance with the instructions to Form 10-Q pursuant to the rules and regulations of the Securities and Exchange Commission (SEC) and, therefore, do not include all information and notes normally provided in audited financial statements. The accounting policies are described in the “Notes to Consolidated Financial Statements” in the Annual Report on Form 10-K for the 2024 fiscal year filed with the SEC on March 29, 2024 (the Form 10-K) and updated, as necessary, in this Form 10-Q. The year-end condensed consolidated balance sheet data presented for comparative purposes was derived from audited financial statements. In the opinion of management, all adjustments (consisting of normal recurring accruals and adjustments) considered necessary for a fair statement have been included. The results of operations for any interim period are not necessarily indicative of, nor comparable to, the results of operations for any other interim period or for a full fiscal year. These unaudited condensed consolidated financial statements should be read in conjunction with the consolidated financial statements and related notes contained in the Form 10-K.
Basis of Consolidation
The Company’s fiscal year ends on January 31. The condensed consolidated financial statements of the Company and its subsidiaries have been prepared in conformity with U.S. GAAP. All intercompany transactions and balances have been eliminated upon consolidation.
Significant Accounting Policies
There have been no material changes to the Company’s significant accounting policies described in Note 1 - Organization and Summary of Significant Accounting Policies, of the Notes to Consolidated Financial Statements included in the Company’s Annual Report on Form 10-K for the fiscal year ended January 31, 2024.
Concentration of Risk
The Company’s products are manufactured, assembled and tested by third-party contractors located primarily in Asia. The Company does not have long-term agreements with these contractors. A significant disruption in the operations of one or more of these contractors would impact the production of the Company’s products which could have a material adverse effect on its business, financial condition and results of operations.
8
A substantial portion of the Company’s revenue is derived from sales through one of its distributors, WT Microelectronics Co., Ltd., formerly Wintech Microelectronics Co., Ltd., or WT, which serves as its non-exclusive sales representative and fulfillment partner in Asia other than Japan, and to one ODM, Chicony Electronics Co., Ltd., or Chicony, which manufactures devices incorporating the Company’s solutions on behalf of multiple end-customers. Termination of the relationships with these customers could result in a temporary or permanent loss of revenue. Furthermore, any credit issues from these customers could impair their abilities to make timely payment to the Company. See Note 15 for additional information regarding revenue and credit concentration with these customers.
Financial instruments that potentially subject the Company to concentrations of credit risk consist primarily of cash, cash equivalents, marketable debt securities and accounts receivable. The Company maintains its cash primarily in checking accounts with reputable financial institutions. Cash deposits held with these financial institutions may exceed the amount of insurance provided on such deposits. The Company has not experienced any losses on deposits of its cash. In order to limit the exposure of each investment, the cash equivalents and marketable debt securities consist primarily of money market funds, fixed deposit accounts, commercial paper, corporate bonds, asset-backed securities and U.S. government securities which management assesses to be highly liquid. The Company does not hold or issue financial instruments for trading purposes.
The Company performs ongoing credit evaluation of its customers and adjusts credit limits based upon payment history and customers’ credit worthiness. The Company regularly monitors collections and payments from its customers.
Restricted Cash
Amounts included in restricted cash represent those required to be set aside to secure certain transactions in a foreign entity. As of April 30, 2024 and January 31, 2024, restricted cash was immaterial, respectively.
|
|
As of |
|
|||||||||||||
|
|
April 30, |
|
|
January 31, |
|
|
April 30, |
|
|
January 31, |
|
||||
|
|
(in thousands) |
|
|||||||||||||
Cash and cash equivalents |
|
$ |
|
|
$ |
|
|
$ |
|
|
$ |
|
||||
Restricted cash |
|
|
|
|
|
|
|
|
|
|
|
|
||||
Total as presented in the condensed consolidated statements of cash flows |
|
$ |
|
|
$ |
|
|
$ |
|
|
$ |
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
||||
Recent Accounting Pronouncements
There has been no adoption of any new and recently issued accounting pronouncements.
9
2. Financial Instruments and Fair Value
The Company invests a portion of its cash in money market funds and debt securities that are denominated in United States dollars. The debt security investment portfolio consists of commercial paper, corporate bonds, asset-backed securities and U.S. government securities.
|
|
As of April 30, 2024 |
|
|||||||||||||
|
|
Amortized Cost |
|
|
Unrealized Gains |
|
|
Unrealized Losses |
|
|
Fair Value |
|
||||
|
|
(in thousands) |
|
|||||||||||||
Money market funds |
|
$ |
|
|
$ |
|
|
$ |
|
|
$ |
|
||||
Commercial paper |
|
|
|
|
|
|
|
|
|
|
|
|
||||
Corporate bonds |
|
|
|
|
|
|
|
|
( |
) |
|
|
|
|||
Asset-backed securities |
|
|
|
|
|
|
|
|
( |
) |
|
|
|
|||
U.S. government securities |
|
|
|
|
|
|
|
|
( |
) |
|
|
|
|||
Total cash equivalents and marketable debt securities |
|
$ |
|
|
$ |
|
|
$ |
( |
) |
|
$ |
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
||||
|
|
As of January 31, 2024 |
|
|||||||||||||
|
|
Amortized Cost |
|
|
Unrealized Gains |
|
|
Unrealized Losses |
|
|
Fair Value |
|
||||
|
|
(in thousands) |
|
|||||||||||||
Money market funds |
|
$ |
|
|
$ |
|
|
$ |
|
|
$ |
|
||||
Commercial paper |
|
|
|
|
|
|
|
|
|
|
|
|
||||
Corporate bonds |
|
|
|
|
|
|
|
|
( |
) |
|
|
|
|||
Asset-backed securities |
|
|
|
|
|
|
|
|
( |
) |
|
|
|
|||
U.S. government securities |
|
|
|
|
|
|
|
|
( |
) |
|
|
|
|||
Total cash equivalents and marketable debt securities |
|
$ |
|
|
$ |
|
|
$ |
( |
) |
|
$ |
|
|||
|
|
As of April 30, 2024 |
|
|||||||||||||||||||||
|
|
Less than 12 Months |
|
|
12 Months or Greater |
|
|
Total |
|
|||||||||||||||
|
|
Fair Value |
|
|
Unrealized Losses |
|
|
Fair Value |
|
|
Unrealized Losses |
|
|
Fair Value |
|
|
Unrealized Losses |
|
||||||
|
|
(in thousands) |
|
|||||||||||||||||||||
Corporate bonds |
|
$ |
|
|
$ |
( |
) |
|
$ |
|
|
$ |
( |
) |
|
$ |
|
|
$ |
( |
) |
|||
Asset-backed securities |
|
|
|
|
|
( |
) |
|
|
|
|
|
( |
) |
|
|
|
|
|
( |
) |
|||
U.S. government securities |
|
|
|
|
|
( |
) |
|
|
|
|
|
( |
) |
|
|
|
|
|
( |
) |
|||
Total marketable debt securities at loss position |
|
$ |
|
|
$ |
( |
) |
|
$ |
|
|
$ |
( |
) |
|
$ |
|
|
$ |
( |
) |
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||
|
|
As of January 31, 2024 |
|
|||||||||||||||||||||
|
|
Less than 12 Months |
|
|
12 Months or Greater |
|
|
Total |
|
|||||||||||||||
|
|
Fair Value |
|
|
Unrealized Losses |
|
|
Fair Value |
|
|
Unrealized Losses |
|
|
Fair Value |
|
|
Unrealized Losses |
|
||||||
|
|
(in thousands) |
|
|||||||||||||||||||||
Corporate bonds |
|
$ |
|
|
$ |
( |
) |
|
$ |
|
|
$ |
( |
) |
|
$ |
|
|
$ |
( |
) |
|||
Asset-backed securities |
|
|
|
|
|
( |
) |
|
|
|
|
|
( |
) |
|
|
|
|
|
( |
) |
|||
U.S. government securities |
|
|
|
|
|
( |
) |
|
|
|
|
|
( |
) |
|
|
|
|
|
( |
) |
|||
Total marketable debt securities at loss position |
|
$ |
|
|
$ |
( |
) |
|
$ |
|
|
$ |
( |
) |
|
$ |
|
|
$ |
( |
) |
|||
|
|
As of |
|
|||||
|
|
April 30, 2024 |
|
|
January 31, 2024 |
|
||
|
|
(in thousands) |
|
|||||
Included in cash equivalents |
|
$ |
|
|
$ |
|
||
Included in marketable debt securities |
|
|
|
|
|
|
||
Total cash equivalents and marketable debt securities |
|
$ |
|
|
$ |
|
||
10
The contractual maturities of the investments at April 30, 2024 and January 31, 2024 were as follows:
|
|
As of |
|
|||||
|
|
April 30, 2024 |
|
|
January 31, 2024 |
|
||
|
|
(in thousands) |
|
|||||
Due within one year |
|
$ |
|
|
$ |
|
||
Due in 1 - 5 years |
|
|
|
|
|
|
||
Total cash equivalents and marketable debt securities |
|
$ |
|
|
$ |
|
||
The unrealized gains and losses on the available-for-sale securities were primarily caused by fluctuations in market value and interest rates as a result of the economic environment. In accordance with ASU No. 2016-13, Financial Instruments-Credit Losses (Topic 326): Measurement of Credit Losses on Financial Instruments, the Company estimates the expected losses at an individual security level whenever a security’s fair value is below its amortized cost basis using the discounted cash flow method. The credit-related portion of the loss is recognized in other income, net, in the condensed consolidated statements of operations but is limited to the difference between the fair value and the amortized cost basis of the security, adjusted for accrued interest. The non-credit-related portion of the loss is recognized in accumulated other comprehensive loss in the condensed consolidated balance sheets. The credit-related losses were not material for the three months ended April 30, 2024 and 2023, respectively.
Interest income, including amortization of premiums and accretion of discounts related to the investments, as well as realized gains and losses from sales of the investments are recorded in other income, net, in the condensed consolidated statements of operations. For the three months ended April 30, 2024 and 2023, interest income and realized gains and losses, net, were approximately $
The following fair value hierarchy is applied for disclosure of the inputs used to measure fair value. This hierarchy prioritizes the inputs into three broad levels as follows:
Level 1—Inputs are unadjusted quoted prices in active markets for identical assets or liabilities.
Level 2—Inputs are quoted prices for similar assets and liabilities in active markets or inputs that are observable for the assets or liabilities, either directly or indirectly through market corroboration, for substantially the full term of the financial instruments.
Level 3—Unobservable inputs based on the Company’s own assumptions used to measure assets and liabilities at fair value. The inputs require significant management judgment or estimation.
The Company measures the fair value of money market funds using quoted prices in active markets for identical assets and classifies them within Level 1. The fair value of the Company’s investments in other debt securities are obtained based on quoted prices for similar assets in active markets and are classified within Level 2.
The following tables present the fair value of the financial instruments measured on a recurring basis as of April 30, 2024 and January 31, 2024, respectively:
|
|
As of April 30, 2024 |
|
|||||||||||||
|
|
Total |
|
|
Level 1 |
|
|
Level 2 |
|
|
Level 3 |
|
||||
|
|
(in thousands) |
|
|||||||||||||
Money market funds |
|
$ |
|
|
$ |
|
|
$ |
|
|
$ |
|
||||
Commercial paper |
|
|
|
|
|
|
|
|
|
|
|
|
||||
Corporate bonds |
|
|
|
|
|
|
|
|
|
|
|
|
||||
Asset-backed securities |
|
|
|
|
|
|
|
|
|
|
|
|
||||
U.S. government securities |
|
|
|
|
|
|
|
|
|
|
|
|
||||
Total cash equivalents and marketable debt securities |
|
$ |
|
|
$ |
|
|
$ |
|
|
$ |
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
||||
|
|
As of January 31, 2024 |
|
|||||||||||||
|
|
Total |
|
|
Level 1 |
|
|
Level 2 |
|
|
Level 3 |
|
||||
|
|
(in thousands) |
|
|||||||||||||
Money market funds |
|
$ |
|
|
$ |
|
|
$ |
|
|
$ |
|
||||
Commercial paper |
|
|
|
|
|
|
|
|
|
|
|
|
||||
Corporate bonds |
|
|
|
|
|
|
|
|
|
|
|
|
||||
Asset-backed securities |
|
|
|
|
|
|
|
|
|
|
|
|
||||
U.S. government securities |
|
|
|
|
|
|
|
|
|
|
|
|
||||
Total cash equivalents and marketable debt securities |
|
$ |
|
|
$ |
|
|
$ |
|
|
$ |
|
||||
11
In addition to available-for-sale securities, the Company also has fixed deposit accounts that are classified as cash equivalents. As of April 30, 2024 and January 31, 2024, the carrying value of fixed deposit accounts was approximately $
3. Inventories
Inventories at April 30, 2024 and January 31, 2024 consisted of the following:
|
|
As of |
|
|||||
|
|
April 30, 2024 |
|
|
January 31, 2024 |
|
||
|
|
(in thousands) |
|
|||||
Work-in-progress |
|
$ |
|
|
$ |
|
||
Finished goods |
|
|
|
|
|
|
||
Total |
|
$ |
|
|
$ |
|
||
4. Property and Equipment, Net
Depreciation expense was approximately $
|
|
As of |
|
|||||
|
|
April 30, 2024 |
|
|
January 31, 2024 |
|
||
|
|
(in thousands) |
|
|||||
Computer hardware and software |
|
$ |
|
|
$ |
|
||
Tools and equipment |
|
|
|
|
|
|
||
Furniture and fixtures |
|
|
|
|
|
|
||
Leasehold improvements |
|
|
|
|
|
|
||
Construction in progress |
|
|
|
|
|
|
||
|
|
|
|
|
|
|
||
Less: accumulated depreciation and amortization |
|
|
( |
) |
|
|
( |
) |
Total property and equipment, net |
|
$ |
|
|
$ |
|
||
5. Goodwill and Intangible Assets, Net
Goodwill represents the excess of the purchase price over the fair value of net tangible and identifiable intangible assets acquired in a business combination.
Intangible assets primarily consist of software licenses as well as developed technology, customer relationships and trade name that were acquired from business combinations.
The Company enters into certain software license agreements with third parties from time-to-time. The software licenses consist of noncancelable on-premise internal-use software and software with alternative use that is to be sold, leased or otherwise marketed as part of a product. The licenses have been capitalized as intangible assets, and the corresponding future payments have been recorded as liabilities at net present value. As of April 30, 2024, software license liabilities of approximately $
The components of intangible assets as of April 30, 2024 and January 31, 2024 were as follows:
|
|
As of April 30, 2024 |
|
|
As of January 31, 2024 |
|
||||||||||||||||||
|
|
Gross Carrying Amount |
|
|
Accumulated Amortization |
|
|
Net Carrying Amount |
|
|
Gross Carrying Amount |
|
|
Accumulated Amortization |
|
|
Net Carrying Amount |
|
||||||
|
|
(in thousands) |
|
|||||||||||||||||||||
Software licenses |
|
$ |
|
|
$ |
( |
) |
|
$ |
|
|
$ |
|
|
$ |
( |
) |
|
$ |
|
||||
Developed technology |
|
|
|
|
|
( |
) |
|
|
|
|
|
|
|
|
( |
) |
|
|
|
||||
Customer relationships |
|
|
|
|
|
( |
) |
|
|
|
|
|
|
|
|
( |
) |
|
|
|
||||
Trade name |
|
|
|
|
|
( |
) |
|
|
|
|
|
|
|
|
( |
) |
|
|
|
||||
Total intangible assets, net |
|
$ |
|
|
$ |
( |
) |
|
$ |
|
|
$ |
|
|
$ |
( |
) |
|
$ |
|
||||
12
The amortization expense associated with software licenses was approximately $
|
|
As of |
|
|
|
|
April 30, 2024 |
|
|
Fiscal Year |
|
(in thousands) |
|
|
2025 (9 months remaining) |
|
$ |
|
|
2026 |
|
|
|
|
2027 |
|
|
|
|
2028 |
|
|
|
|
2029 |
|
|
|
|
Thereafter |
|
|
|
|
Total future amortization expenses: |
|
$ |
|
|
Goodwill and intangible assets are tested for impairment at least annually, in the fourth fiscal quarter, or more frequently if events or changes in circumstances indicate that they may be impaired. There were
6. Accrued and Other Current Liabilities
Accrued and other current liabilities at April 30, 2024 and January 31, 2024 consisted of the following:
|
|
As of |
|
|||||
|
|
April 30, 2024 |
|
|
January 31, 2024 |
|
||
|
|
(in thousands) |
|
|||||
Accrued employee compensation |
|
$ |
|
|
$ |
|
||
Accrued product development costs |
|
|
|
|
|
|
||
Software license liabilities, current |
|
|
|
|
|
|
||
Other accrued liabilities |
|
|
|
|
|
|
||
Total accrued and other current liabilities |
|
$ |
|
|
$ |
|
||
The timing of SoC development and invoicing from outside foundries usually results in the fluctuation of accrued product development costs. For the accrued employee compensation, approximately $
7. Leases
There were no material lease agreements entered into, or modified, during the three months ended April 30, 2024. The operating lease expense was approximately $
Supplemental cash flow information related to the operating leases is as follows:
|
|
Three Months Ended April 30, |
|
|||||
|
|
2024 |
|
|
2023 |
|
||
|
|
(in thousands) |
|
|||||
Cash paid for operating leases included in operating cash flows |
|
$ |
|
|
$ |
|
||
Supplemental non-cash information related to lease liabilities arising from obtaining right-of-use assets |
|
$ |
|
|
$ |
|
||
13
As of April 30, 2024, the weighted average remaining lease term is
|
|
As of |
|
|
|
|
April 30, 2024 |
|
|
Fiscal Year |
|
(in thousands) |
|
|
2025 (9 months remaining) |
|
$ |
|
|
2026 |
|
|
|
|
2027 |
|
|
|
|
2028 |
|
|
|
|
2029 |
|
|
|
|
Thereafter |
|
|
|
|
Total future annual minimum lease payments |
|
|
|
|
Less: interest |
|
|
( |
) |
Total lease liabilities |
|
$ |
|
|
8. Deferred Revenue
Deferred revenue is primarily related to nonrecurring engineering charges that are either invoiced or paid but for which the related performance obligations are not yet satisfied, as well as the portion of a transaction price that exceeds the weighted average selling price for products sold to date under tiered-pricing contracts that contain material rights. During the three months ended April 30, 2024 and 2023, the amount recognized as revenue that was included in the deferred revenue balance at the end of prior fiscal year was not material, respectively.
As of April 30, 2024, the amount of remaining unsatisfied performance obligations on contracts, primarily consisting of product purchase orders and nonrecurring engineering service agreements with original contract duration of more than
9. Other Long-Term Liabilities
Other long-term liabilities at April 30, 2024 and January 31, 2024 consisted of the following:
|
|
As of |
|
|||||
|
|
April 30, 2024 |
|
|
January 31, 2024 |
|
||
|
|
(in thousands) |
|
|||||
Unrecognized tax benefits, including interest |
|
$ |
|
|
$ |
|
||
Deferred tax liabilities |
|
|
|
|
|
|
||
Software license liabilities, non-current |
|
|
|
|
|
|
||
Other long-term liabilities |
|
|
|
|
|
|
||
Total other long-term liabilities |
|
$ |
|
|
$ |
|
||
10. Capital Stock
Preference shares
There were
Ordinary shares
In the first quarter of fiscal year 2025, the Company added
As of April 30, 2024 and January 31, 2024, the following ordinary shares were reserved for future issuance under the Company’s equity plans and employee stock purchase plan:
14
|
|
As of |
|
|||||
|
|
April 30, 2024 |
|
|
January 31, 2024 |
|
||
Shares reserved for options, restricted stock and |
|
|
|
|
|
|
||
Shares reserved for employee stock purchase plan |
|
|
|
|
|
|
||
Share repurchase program
There were
11. Stock-based Compensation
The following table presents the classification of stock-based compensation for the periods indicated:
|
|
Three Months Ended April 30, |
|
|||||
|
|
2024 |
|
|
2023 |
|
||
|
|
(in thousands) |
|
|||||
Stock-based compensation: |
|
|
|
|
|
|
||
Cost of revenue |
|
$ |
|
|
$ |
|
||
Research and development |
|
|
|
|
|
|
||
Selling, general and administrative |
|
|
|
|
|
|
||
Total stock-based compensation |
|
$ |
|
|
$ |
|
||
As of April 30, 2024, approximately $
The following table sets forth the weighted-average assumptions used to estimate the fair value of employee stock purchase plan awards for the periods indicated:
|
|
Three Months Ended April 30, |
|
|||||
|
|
2024 |
|
|
2023 |
|
||
Employee stock purchase plan awards: |
|
|
|
|
|
|
||
Volatility |
|
|
% |
|
|
% |
||
Risk-free interest rate |
|
|
% |
|
|
% |
||
Expected term (years) |
|
|
|
|
|
|||
Dividend yield |
|
|
% |
|
|
% |
||
The following table summarizes stock option activities for the period indicated:
|
|
Option Outstanding |
|
|||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
Weighted- |
|
|
|
|
|||||
|
|
|
|
|
|
|
|
|
|
Total Intrinsic |
|
|
Average |
|
|
|
|
|||||
|
|
|
|
|
|
|
|
Weighted- |
|
Value Of |
|
|
Remaining |
|
|
Aggregate |
|
|||||
|
|
|
|
|
Weighted- |
|
|
Average |
|
Options |
|
|
Contractual |
|
|
Intrinsic |
|
|||||
|
|
|
|
|
Average |
|
|
Grant-date |
|
Exercised |
|
|
Term |
|
|
Value |
|
|||||
|
|
Shares |
|
|
Exercise Price |
|
|
Fair Value |
|
(in thousands) |
|
|
(in years) |
|
|
(in thousands) |
|
|||||
Outstanding at January 31, 2024 |
|
|
|
|
$ |
|
|
|
|
|
|
|
|
|
|
|
|
|||||
Exercised |
|
|
( |
) |
|
|
|
|
|
|
$ |
|
|
|
|
|
|
|
||||
Expired |
|
|
( |
) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||
Outstanding at April 30, 2024 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
$ |
|
|||||
Exercisable at April 30, 2024 |
|
|
|
|
$ |
|
|
|
|
|
|
|
|
|
|
$ |
|
|||||
15
The intrinsic value of options outstanding and exercisable is calculated based on the difference between the fair market value of the Company’s ordinary shares on the reporting date and the exercise price. The closing price of the Company’s ordinary shares on April 30, 2024 was $
The following table summarizes restricted stock unit activities for the period indicated:
|
|
|
|
|
Weighted- |
|
||
|
|
|
|
|
Average |
|
||
|
|
|
|
|
Grant-Date |
|
||
|
|
Shares |
|
|
Fair Value |
|
||
Unvested at January 31, 2024 |
|
|
|
|
$ |
|
||
Granted |
|
|
|
|
|
|
||
Vested |
|
|
( |
) |
|
|
|
|
Forfeited |
|
|
( |
) |
|
|
|
|
Unvested at April 30, 2024 |
|
|
|
|
$ |
|
||
As of April 30, 2024, the aggregate intrinsic value of unvested restricted stock units was $
12. Net Loss Per Ordinary Share
The following table sets forth the computation of basic and diluted loss per ordinary share for the periods indicated:
|
|
Three Months Ended April 30, |
|
|||||
|
|
2024 |
|
|
2023 |
|
||
|
|
(in thousands, except share and per share data) |
|
|||||
Numerator: |
|
|
|
|
|
|
||
Net loss |
|
$ |
( |
) |
|
$ |
( |
) |
Denominator: |
|
|
|
|
|
|
||
Weighted-average ordinary shares - basic |
|
|
|
|
|
|
||
Weighted-average ordinary shares - diluted |
|
|
|
|
|
|
||
Net loss per ordinary share: |
|
|
|
|
|
|
||
Basic |
|
$ |
( |
) |
|
$ |
( |
) |
Diluted |
|
$ |
( |
) |
|
$ |
( |
) |
The following weighted-average potentially dilutive securities were excluded from the computation of diluted net loss per ordinary share as their effect would have been antidilutive:
|
|
Three Months Ended April 30, |
|
|||||
|
|
2024 |
|
|
2023 |
|
||
Options to purchase ordinary shares |
|
|
|
|
|
|
||
Restricted stock units |
|
|
|
|
|
|
||
Employee stock purchase plan |
|
|
|
|
|
|
||
|
|
|
|
|
|
|
||
13. Income Taxes
The following table provides details of income taxes for the periods indicated:
|
|
Three Months Ended April 30, |
|
|||||
|
|
2024 |
|
|
2023 |
|
||
|
|
(in thousands) |
|
|||||
Loss before income taxes |
|
$ |
( |
) |
|
$ |
( |
) |
Provision for income taxes |
|
|
|
|
|
|
||
Effective tax rate |
|
( |
|
|
( |
|
||
The Company recorded an expense for income taxes of $
16
The Company files federal and state income tax returns in the United States and in various foreign jurisdictions. The Company’s fiscal years
The Company regularly assesses the likelihood of adverse outcomes resulting from potential tax examinations to determine the adequacy of its provision for income taxes. These assessments can require considerable estimates and judgments. As of April 30, 2024, the gross amount of unrecognized tax benefits was approximately $
14. Commitments and Contingencies
Contract Manufacturer Commitments
The Company’s components and products are procured and built by independent contract manufacturers based on sales forecasts. These forecasts include estimates of future demand, historical trends, analysis of sales and marketing activities, and adjustment of overall market conditions. The Company regularly issues purchase orders to independent contract manufacturers which are cancelable upon agreement between the Company and third-party manufacturers. These manufacturing purchase commitments typically provide the Company with flexibility to cancel, reschedule or adjust requirements based upon business needs but the Company may incur certain costs depending on the production stage of the products. As of April 30, 2024 and January 31, 2024, total manufacturing purchase commitments were approximately $
Indemnification
The Company, from time to time, in the normal course of business, indemnifies certain vendors with whom it enters into contractual relationships. The Company has agreed to hold the other party harmless against third-party claims in connection with the Company’s future products. The Company also indemnifies certain customers against third-party claims related to certain intellectual property and product liability matters. It is not possible to determine the maximum potential amount of liability under these indemnification obligations due to the limited history of prior indemnification claims and the unique facts and circumstances that are likely to be involved in each particular claim. The Company has
Other Matters
From time to time, the Company is subject to commercial disputes, employment issues, intellectual property claims and litigation, in the ordinary course of its business. Although the ultimate disposition of asserted claims cannot be predicted with certainty, it is the Company’s belief that the outcome of any such claims, either individually or on a combined basis, will not have a material adverse effect on its consolidated financial position. The results of any litigation cannot be predicted with certainty, and regardless of the outcome, litigation can have an adverse impact on the Company because of defense and settlement costs, diversion of management resources, and other factors. As of April 30, 2024 and January 31, 2024, there were
17
15. Segment Reporting
The Company operates in
Geographic Revenue
The following table sets forth the Company’s revenue by geographic region based on bill-to location for the periods indicated.
|
|
Three Months Ended April 30, |
|
|||||
|
|
2024 |
|
|
2023 |
|
||
|
|
(in thousands) |
|
|||||
Taiwan |
|
$ |
|
|
$ |
|
||
Asia Pacific |
|
|
|
|
|
|
||
Europe |
|
|
|
|
|
|
||
North America other than United States |
|
|
|
|
|
|
||
United States |
|
|
|
|
|
|
||
Total revenue |
|
$ |
|
|
$ |
|
||
Substantially all of the Company’s property and equipment were located in the Asia Pacific region, United States and Europe. As of April 30, 2024, the net amount of these fixed assets located in these regions was approximately $
Major Customers
For the three months ended April 30, 2024, the customers representing 10% or more of revenue were WT and Chicony, which accounted for approximately
16. Subsequent Events
On May 29, 2024, the Company’s Board of Directors approved an extension of the Company's existing share repurchase program for an additional twelve months through
18
ITEM 2. Management’s Discussion and Analysis of Financial Condition and Results of Operations
The following discussion and analysis of our financial condition and results of operations should be read in conjunction with the unaudited condensed consolidated financial statements and related notes included elsewhere in this Quarterly Report on Form 10-Q, and the consolidated financial statements and notes thereto for the fiscal year ended January 31, 2024 and management’s discussion and analysis of our financial condition and results of operations included in our Annual Report on Form 10-K for the 2024 fiscal year filed with the Securities and Exchange Commission, or SEC, on March 29, 2024.
This Quarterly Report on Form 10-Q, including this “Management’s Discussion and Analysis of Financial Condition and Results of Operations”, includes a number of forward-looking statements that involve many risks and uncertainties. Forward-looking statements are identified by the use of the words “would,” “could,” “will,” “may,” “expect,” “believe,” “should,” “anticipate,” “outlook,” “if,” “future,” “intend,” “plan,” “estimate,” “predict,” “potential,” “target,” “seek,” “project,” “forecast,” “continue” or “foreseeable” and similar words and phrases, including the negatives of these terms, or other variations of these terms, that denote future events. Such statements include, but are not limited to, statements concerning our market opportunity and our ability to compete in such markets, our product strategy, our ability to develop and introduce new solutions, our future financial and operating performance, our sales and marketing strategy, our investment strategy, research and development, our customer and supplier relationships and inventory levels, industry trends, our cash needs and capital requirements, our repurchase programs, our expectations about taxes, operating expenses, and cost recognition, the availability of third-party components and economic and political conditions. These statements reflect our current views with respect to future events and our potential financial performance, and are subject to risks and uncertainties that could cause our actual results and financial position to differ materially and adversely from what is projected or implied in any forward-looking statements included in this Quarterly Report on Form 10-Q. These factors include, but are not limited to: risks associated with revenue being generated from new customers or design wins, neither of which is assured; our ability to retain and expand customer relationships and to achieve design wins; risks associated with the overall economy, including higher inflation and escalating trade tensions between the U.S. and China; the commercial success of our customers’ products; our growth strategy; fluctuations in our operating results; our ability to anticipate future market demands and future needs and preferences of our customers; our ability to introduce new and enhanced solutions; the expansion of our current markets and our ability to successfully enter new markets; anticipated trends and challenges, including competition, in the markets in which we operate or seek to operate; our expectations regarding computer vision; our ability to effectively generate and manage growth; our ability to retain key employees; the potential for intellectual property disputes or other litigation; the risks described under Item 1A of Part II — “Risk Factors,” and Item 2 of Part I — “Management’s Discussion and Analysis of Financial Condition and Results of Operations”; the risks described elsewhere in this Quarterly Report on Form 10-Q and those discussed in other documents we file with the SEC. We make these forward-looking statements based upon information available on the date of this Quarterly Report on Form 10-Q, and we have no obligation (and expressly disclaim any such obligation) to update or alter any forward-looking statements, whether as a result of new information or otherwise except as otherwise required by securities regulations.
Overview
We are a leading developer of low-power system-on-a-chip, or SoC, semiconductors providing powerful artificial intelligence, or AI, processing, advanced image signal processing and high-resolution video compression. Since inception, we have primarily served human viewing applications with video and image processors for enterprise, public infrastructure and home applications, such as internet protocol, or IP, security cameras, sports cameras, wearables, aerial drones, and aftermarket automotive video recorders. Our recent development efforts have focused on creating advanced AI technology that enables edge devices to visually perceive the environment and make decisions based on the data collected from cameras and, most recently, other types of sensors. This category of AI technology is known as computer vision (CV) or edge inference AI, and our CV SoCs integrate our state-of-the-art video processor technology together with our deep learning neural network processing technology, which we refer to as CVflow™. The CVflow-architecture supports a variety of CV algorithms, including object detection, classification and tracking, semantic and instance segmentation, image processing, stereo object detection, and terrain mapping. CVflow can process other sensor modalities including lidar and radar, and allows customers to differentiate their products by porting their own, or third party, neural networks and/or classical CV algorithms to our CVflow-based SoCs. Our latest third generation CVflow technology enables us to address incremental and computationally intense AI applications for deep fusion, deep planning, and large language models (LLMs), as well as efficiently process transformer AI networks.
Our SoC designs fully integrate computer vision functionality, high-definition, or HD, video processing, image processing, audio processing, and system functions onto a single chip, delivering exceptional video and image quality at high compression rates, differentiated functionality and low power consumption. These CV-based technologies are allowing us to address a broader range of markets and applications requiring AI video features, including IP security cameras, a variety of automotive cameras, consumer cameras, and industrial and robotic applications. We anticipate that our CV technology will also enable us to capture more content per electronic system and increase our average selling price.
19
Our development efforts are focused on SoCs that provide human viewing, computer vision and radar detection functionalities. As a result, we believe that our future revenue growth, if any, will significantly depend upon our ability to expand within camera markets with our computer vision technology, particularly in the Internet of Things, or IoT, markets, as well as emerging markets such as AI-enabled security cameras, AI-based driving applications, including driver monitoring systems, advanced blind spot detection, object detection, and deep learning algorithms for HD mapping solutions, automotive advanced driver assistance systems, or ADAS, applications, and industrial and robotics markets. We expect our research and development expenditures to increase in comparison to prior periods as we devote additional resources to the development of innovative video and image processing solutions with increased functionality, such as AI and CV capabilities, and as we target new markets.
We sell our SoC solutions to leading original design manufacturers, or ODMs, and original equipment manufacturers, or OEMs, globally, and in the automotive market, we also sell to Tier-1 suppliers. We refer to ODMs and Tier-1 automotive suppliers as our customers and OEMs as our end customers, except as otherwise indicated or as the context otherwise requires.
Our sales cycles typically require a significant investment of time and a substantial expenditure of resources before we can realize revenue from the sale of our solutions, if any. Our typical sales cycle consists of a multi-month sales and development process involving our customers’ system designers and management and our sales personnel and software engineers. If successful, this process culminates in a customer’s decision to use our solutions in its system, which we refer to as a design win. Our sales efforts are typically directed to the OEM of the product that will incorporate our video and image processing solution, but the eventual design and incorporation of our SoC into the product may be handled by an ODM or Tier-1 supplier on behalf of the OEM.
Volume production may begin within 9 to 18 months after a design win, but could be longer in certain markets, depending on the complexity of our customer’s product and other factors upon which we may have little or no influence. In general, design cycles will be longer in the OEM automotive and industrial and robotics markets than in the IoT markets. Once our solutions have been incorporated into a customer’s design, they are likely to be used for the life cycle of the customer’s product. Conversely, a design loss to a competitor will likely preclude any opportunity for future revenue from such customer’s product. Even if we obtain a design win and our SoC remains a component through the life cycle of a customer’s product, the volume and timing of actual sales of our SoCs to the customer depend upon the production, release and market acceptance of that product, none of which are within our control. An IoT product typically has a life cycle of 6 to 24 months. We anticipate that product life cycles will typically be longer than 24 months in the OEM automotive and industrial and robotics markets, as new product introductions occur less frequently in these markets.
Financial Highlights
Factors Affecting Our Performance
20
Ability to Capitalize on AI and Computer Vision Trends. We expect that AI and computer vision functionality will become an increasingly important requirement in many of our current and future markets, including IoT, automotive, industrial and robotics markets. As a result, we believe that our ability to develop advanced AI computer vision technology, enable and support customer product development in emerging applications, such as ADAS, advanced blind spot detection, object detection, classification and tracking, people recognition, retail analytics, and machine learning, and gain customer acceptance of our technology platform and solutions will be critical to our future success. Moreover, achieving design wins, particularly for computer vision-centric applications in the IoT, automotive, industrial and robotics markets, is vital to our ability to generate revenue growth. As such, we closely monitor our design wins with our customers. However, a design win may not successfully materialize into revenue, and even if it does result in revenue, the amount generated by each design win can vary significantly.
Ability to Develop and Introduce New or Enhanced Solutions. We operate in a dynamic environment characterized by rapidly changing technologies and technological obsolescence. To compete successfully, we must design, develop, market and sell enhanced solutions with increased levels of performance and functionality that meet the expectations of our customers. As such, we continuously invest in our research and development projects, especially AI and computer vision technologies. However, failure to anticipate or timely develop new or enhanced solutions in response to technology shifts and trends could result in decreased revenue and our competitors achieving design wins we sought. Moreover, any reliability or quality problems with our solutions could harm our reputation, increase additional development and replacement costs, and prevent us from retaining existing customers and attracting new customers.
Pricing, Product Cost and Margin. Our pricing and margins depend on the volumes and features of the solutions we provide to our customers. Additionally, we make significant investments in new solutions for both cost improvements and new features that we expect to drive revenue and maintain margins. In general, solutions incorporated into more complex configurations, such as those used in high-performance camera applications or, in the future, advanced driver assistance systems, have higher prices and higher gross margins as compared to solutions sold into lower-performing, more competitive camera applications. Our average selling price can vary by market and application due to market-specific supply and demand, the maturation of products launched in previous years and the launch of new products by us or our competitors.
We continually monitor the cost of our solutions. As we rely on third-party manufacturers for the manufacture of our products, we maintain a close relationship with these suppliers to continually monitor production yields, component costs and design efficiencies.
Continued Concentration of Revenue by End Market. Historically, our revenue has been significantly concentrated in a small number of end markets and we developed technologies to provide solutions for new markets as they emerged. Since fiscal year 2018, the IoT markets and automotive markets have been our largest end markets and sales into these markets collectively generated the majority of our revenue. We believe, however, that continued expansion into new markets is required to facilitate revenue growth and customer diversification. We have recently introduced solutions to address emerging applications and markets, such as the incorporation of AI and computer vision functionalities for AI-enabled security cameras, AI-based driving applications and industrial and robotics markets. While we will continue to seek to expand our end market exposure, we anticipate that sales to a limited number of markets will continue to account for a significant percentage of our total revenue for the foreseeable future. Our concentration in a limited number of markets may cause our financial performance to fluctuate significantly from period to period based on the success or failure of products that our SoCs are designed into as well as the overall growth or decline in the video capture markets in which we compete. In addition, we derive a significant portion of our revenue from a limited number of ODMs who build products on behalf of a limited number of OEMs and from a limited number of OEMs to whom we ship directly. We believe that our operating results for the foreseeable future will continue to depend on sales to a relatively small number of customers.
Sales Volume. A typical design win that successfully launches into the marketplace can generate a wide range of sales volumes for our solutions, depending on the end market demand for our customers’ products. Our ability to accurately forecast demand can be adversely affected by a number of factors, including the reputation of the end customer, market penetration, product capabilities, size of the end market that the product addresses, our end customers’ ability to sell their products, miscalculations by our customers of their inventory requirements, changes in market conditions, adverse changes in our product order mix and fluctuating demand for our customers’ products. In certain cases, we may provide volume discounts on sales of our solutions, which may be offset by lower manufacturing costs related to higher volumes. In general, our customers with greater market penetration and better branding tend to develop products that generate larger volumes over the product life cycle.
21
Customer Product Life Cycle. We estimate our customers’ product life cycles based on the customer, type of product and end market. We typically commence commercial shipments from 9 to 18 months following a design win; however, in some markets, lengthier product and development cycles are possible, depending on the scope and nature of the project, such as in the automotive market. An IoT product typically has a product life cycle of 6 to 24 months. We anticipate that product development and product life cycles will typically be longer than 24 months in the OEM automotive, Tier-1 automotive suppliers and robotics markets, as new product introductions typically occur less frequently in these markets.
Impact of Global Supply Chain Conditions on Our Business. Due in part to impacts of the COVID-19 pandemic, the semiconductor industry faced significant global supply chain challenges over the past few years. Supply chain issues can impact our business as they relate to both our suppliers and our customers. With respect to our suppliers, we have experienced supply constraints for certain chips from Samsung Electronics Corporation and we may in the future experience similar issues. With respect to our customers, to the extent customers face supply chain issues with other components needed to pair with our products in order to produce their end products, such customers may delay future orders of our products or hold inventory of our products for longer periods of time. Recent supply chain challenges have substantially subsided and we expect conditions to return to more stability in future periods.
Results of Operations
The following table sets forth a summary of our statement of operations for the periods indicated:
|
|
Three Months Ended April 30, |
|
|||||
|
|
2024 |
|
|
2023 |
|
||
|
|
|
|
|||||
Revenue |
|
$ |
54,473 |
|
|
$ |
62,142 |
|
Cost of revenue |
|
|
21,313 |
|
|
|
24,623 |
|
Gross profit |
|
|
33,160 |
|
|
|
37,519 |
|
Operating expenses: |
|
|
|
|
|
|
||
Research and development |
|
|
54,137 |
|
|
|
54,441 |
|
Selling, general and administrative |
|
|
18,468 |
|
|
|
18,620 |
|
Total operating expenses |
|
|
72,605 |
|
|
|
73,061 |
|
Loss from operations |
|
|
(39,445 |
) |
|
|
(35,542 |
) |
Other income, net |
|
|
2,271 |
|
|
|
1,286 |
|
Loss before income taxes |
|
|
(37,174 |
) |
|
|
(34,256 |
) |
Provision for income taxes |
|
|
758 |
|
|
|
1,646 |
|
Net loss |
|
$ |
(37,932 |
) |
|
$ |
(35,902 |
) |
The following table sets forth operating results as a percentage of revenue of each line item for the periods indicated:
|
|
Three Months Ended April 30, |
|
|
|||||
|
|
2024 |
|
|
2023 |
|
|
||
Revenue |
|
100 |
|
% |
100 |
|
% |
||
Cost of revenue |
|
|
39 |
|
|
|
40 |
|
|
Gross profit |
|
|
61 |
|
|
|
60 |
|
|
Operating expenses: |
|
|
|
|
|
|
|
||
Research and development |
|
|
99 |
|
|
|
88 |
|
|
Selling, general and administrative |
|
|
34 |
|
|
|
30 |
|
|
Total operating expenses |
|
|
133 |
|
|
|
118 |
|
|
Loss from operations |
|
|
(72 |
) |
|
|
(58 |
) |
|
Other income, net |
|
|
4 |
|
|
|
2 |
|
|
Loss before income taxes |
|
|
(68 |
) |
|
|
(56 |
) |
|
Provision for income taxes |
|
|
2 |
|
|
|
2 |
|
|
Net loss |
|
|
(70 |
) |
% |
|
(58 |
) |
% |
Revenue
22
We derive substantially all of our revenue from the sale of HD and Ultra HD video and image processing SoC solutions to IoT OEMs, IoT ODMs, automotive OEMs or Tier-1 automotive suppliers, either directly or through our distributors. A substantial portion of our revenue from sales was made indirectly through one of our distributors, WT Microelectronics Co., Ltd., formerly Wintech Microelectronics Co., Ltd., or WT, which serves as our non-exclusive sales representative and fulfillment partner in Asia other than Japan, and from one ODM, Chicony Electronics Co., Ltd., or Chicony, which manufactures devices incorporating our solutions on behalf of multiple end-customers.
Our average selling prices fluctuate based on the mix of our solutions sold in a period which reflects the impact of both changes in unit sales of existing solutions as well as the introduction and sales of new solutions. Our AI and CV-based solutions generally have higher selling prices than our traditional video and image processing SoC solutions that do not enable AI or CV functionality. Our solutions are typically characterized by a life cycle that begins with higher average selling prices and lower volumes, followed by broader market adoption, higher volumes and average selling prices that are lower than initial levels.
The end markets into which we sell our products have seen significant changes as consumer preferences have evolved in response to new technologies. As a result, the composition and timing of our revenue may differ meaningfully during periods of technology or consumer preference changes. We expect shifts in consumer use of video capture to continue to change over time, as AI and computer vision specialized use cases emerge and video capture continues to proliferate.
Cost of Revenue and Gross Margin
Cost of revenue includes the cost of materials, such as wafers processed by third-party foundries, costs associated with packaging, assembly, testing and manufacturing support operations, such as logistics, planning and quality assurance, as well as personnel costs (including stock-based compensation) related to project service agreements. Cost of revenue also includes indirect costs, such as inventory valuation reserves, adverse purchase commitment reserves, facility cost allocations, amortization of developed technology and software licenses, warranty and other general overhead costs.
We expect that our gross margin may fluctuate from period to period as a result of changes in customer mix, average selling price, product mix and the introduction of new products by us or our competitors. In general, solutions incorporated into more complex configurations, such as those used in high-performance cameras, and in future advanced automotive OEM applications, have had or are expected to have higher prices and higher gross margins, as compared to solutions sold into the lower-performance, more competitive camera applications. As semiconductor products mature and unit volumes sold to customers increase, their average selling prices typically decline. These declines may be paired with improvements in manufacturing yields and lower wafer, packaging and test costs, which offset some of the margin reduction that could result from lower selling prices.
Research and Development
Research and development expense consists primarily of personnel costs, including salaries, stock-based compensation and employee benefits. The expense also includes costs of development incurred in connection with our collaborations with our foundry vendors, costs of licensing intellectual property from third parties for product development, costs of development for software and hardware tools, costs of fabrication of mask sets for prototype products, the cost and depreciation of equipment, outside services as well as allocated depreciation and facility expenses. All research and development costs are expensed as incurred. We expect our research and development expense to generally increase in absolute dollars as we continue to enhance and expand our product features and offerings and increase headcount for new SoC development and development of computer vision technology.
Selling, General and Administrative
Selling, general and administrative expense consists primarily of personnel costs, including salaries, stock-based compensation and employee benefits for our sales, marketing, finance, human resources, information technology and administrative personnel. The expense also includes amortization of trade name and customer relationships, professional service costs related to accounting, tax, legal services, and allocated depreciation and facility expenses.
Other Income, Net
Other income, net, consists primarily of interest income and yields from our cash deposits and debt security investments, realized gains and losses from equity and debt security investments, subsidies granted by foreign governments, as well as gains and losses from foreign currency transactions and remeasurements.
23
Provision (Benefit) for Income Taxes
We are incorporated and domiciled in the Cayman Islands and also conduct business in several locations such as the United States, China, Taiwan, Hong Kong, Italy, South Korea, Germany, and Japan, and we are subject to taxation in those jurisdictions. Our worldwide operating income is subject to varying tax rates, and our effective tax rate is highly dependent upon the geographic distribution of our earnings or losses and the tax laws and regulations in each geographical region. It is also subject to fluctuation from changes in the valuation of our deferred tax assets and liabilities; tax benefits from excess stock-based compensation deductions; transfer pricing adjustments and the tax effects of nondeductible compensation. We have historically had lower effective tax rates as a substantial percentage of our operations are conducted in lower-tax jurisdictions.
Comparison of the Three Months Ended April 30, 2024 and 2023
Revenue
|
|
Three Months Ended April 30, |
|
|
Change |
|
||||||||||
|
|
2024 |
|
|
2023 |
|
|
Amount |
|
|
% |
|
||||
|
|
(dollars in thousands) |
|
|||||||||||||
Revenue |
|
$ |
54,473 |
|
|
$ |
62,142 |
|
|
$ |
(7,669 |
) |
|
|
(12.3 |
)% |
Revenue decreased for the three months ended April 30, 2024, as compared to the same period in the prior fiscal year, primarily due to lower product unit shipments, partially offset by continued adoption of our CV-based solutions, which have higher average selling prices than non-CV solutions.
Gross Margin
|
|
Three Months Ended April 30, |
|
|
Change |
|
||||||||||
|
|
2024 |
|
|
2023 |
|
|
Amount |
|
|
% |
|
||||
|
|
(dollars in thousands) |
|
|||||||||||||
Gross margin |
|
|
60.9 |
% |
|
|
60.4 |
% |
|
|
— |
|
|
|
0.5 |
% |
Gross margin increased for the three months ended April 30, 2024, as compared to the same period in the prior fiscal year, primarily due to sales of inventory that was previously reserved and lower adverse purchase commitments recognized.
Research and Development
|
|
Three Months Ended April 30, |
|
|
Change |
|
||||||||||
|
|
2024 |
|
|
2023 |
|
|
Amount |
|
|
% |
|
||||
|
|
(dollars in thousands) |
|
|||||||||||||
Research and development |
|
$ |
54,137 |
|
|
$ |
54,441 |
|
|
$ |
(304 |
) |
|
|
(0.6 |
)% |
Research and development expense decreased for the three months ended April 30, 2024, as compared to the same period in the prior fiscal year, primarily due to approximately $0.9 million of lower personnel costs, including stock-based compensation, employee benefits and incentive bonus, as a result of lower headcount, partially offset by approximately $0.6 million of additional engineering-related expenses associated with the progress and number of chips in development.
Selling, General and Administrative
|
|
Three Months Ended April 30, |
|
|
Change |
|
||||||||||
|
|
2024 |
|
|
2023 |
|
|
Amount |
|
|
% |
|
||||
|
|
(dollars in thousands) |
|
|||||||||||||
Selling, general and administrative |
|
$ |
18,468 |
|
|
$ |
18,620 |
|
|
$ |
(152 |
) |
|
|
(0.8 |
)% |
Selling, general and administrative expense decreased for the three months ended April 30, 2024, as compared to the same period in the prior fiscal year, primarily due to approximately $0.7 million of lower personnel costs, including stock-based compensation, employee benefits and incentive bonus, as a result of lower headcount, partially offset by approximately $0.5 million of additional outside professional service costs.
24
Other Income, Net
|
|
Three Months Ended April 30, |
|
|
Change |
|
||||||||||
|
|
2024 |
|
|
2023 |
|
|
Amount |
|
|
% |
|
||||
|
|
(dollars in thousands) |
|
|||||||||||||
Other income, net |
|
$ |
2,271 |
|
|
$ |
1,286 |
|
|
$ |
985 |
|
|
|
76.6 |
% |
The increase in other income, net, for the three months ended April 30, 2024, as compared to the same period in the prior fiscal year, was primarily due to approximately $1.0 million of additional interest income and yields from our cash deposits and debt security investments.
Provision for Income Taxes
|
|
Three Months Ended April 30, |
|
|
Change |
||||||||||||
|
|
2024 |
|
|
2023 |
|
|
Amount |
|
|
% |
||||||
|
|
(dollars in thousands) |
|||||||||||||||
Provision for income taxes |
|
$ |
758 |
|
|
$ |
1,646 |
|
|
$ |
(888 |
) |
|
|
(53.9 |
) |
% |
Effective tax rate |
|
(2.0) |
|
% |
(4.8) |
|
% |
|
— |
|
|
2.8 |
|
% |
|||
The quarterly income taxes reflect an estimate of the corresponding fiscal year’s annual effective tax rate and include, when applicable, adjustments from discrete tax items arising in the quarter.
The decrease in income tax expense for the three months ended April 30, 2024, as compared to the same period in the prior fiscal year, was primarily due to a decrease in the proportion of profits generated in the U.S.
Liquidity and Capital Resources
As of April 30, 2024, we had cash, cash equivalents and marketable debt securities of approximately $203.3 million. We invest in highly-liquid, short-term marketable debt securities and hold these investments as available-for-sale securities. Refer to Note 2 of the Notes to Condensed Consolidated Financial Statements for additional information. The current inflationary environment in the United States and resulting high interest rates have not had a material impact on our investment portfolio and financial position.
Cash Flows
The following table summarizes our cash flows for the periods indicated:
|
|
Three Months Ended April 30, |
|
|||||
|
|
2024 |
|
|
2023 |
|
||
|
|
(in thousands) |
|
|||||
Net cash provided by (used in) operating activities |
|
$ |
(14,951 |
) |
|
$ |
22,025 |
|
Net cash provided by (used in) investing activities |
|
|
2,135 |
|
|
|
(8,210 |
) |
Net cash provided by (used in) financing activities |
|
|
(288 |
) |
|
|
385 |
|
Net increase (decrease) in cash, cash equivalents and restricted cash |
|
$ |
(13,104 |
) |
|
$ |
14,200 |
|
Net Cash Provided by (Used in) Operating Activities
Net cash used in operating activities increased for the three months ended April 30, 2024, as compared to the same period in the prior fiscal year, primarily attributable to reductions in working capital including payments for chip development costs and a higher net loss, adjusted for certain non-cash items.
Net Cash Provided by (Used in) Investing Activities
Net cash provided by investing activities increased for the three months ended April 30, 2024, as compared to the same period in the prior fiscal year, primarily attributable to approximately $9.2 million of net cash receipts from our debt security investments, and $1.2 million less in payments for the purchase of capital assets.
25
Net Cash Provided by (Used in) Financing Activities
Net cash provided by financing activities decreased for the three months ended April 30, 2024, as compared to the same period in the prior fiscal year, primarily due to approximately $1.0 million additional principal payments associated with long-term software license agreements, partially offset by approximately $0.3 million higher cash receipt from stock activities.
Share Repurchase Program
No ordinary shares were repurchased during the three months ended April 30, 2024. As of April 30, 2024, there was approximately $49.0 million remaining available for repurchases under the current repurchase program through June 30, 2024. On May 29, 2024, our Board of Directors approved an extension of the existing share repurchase program for an additional twelve months through June 30, 2025. Refer to Note 16 of the Notes to Condensed Consolidated Financial Statements for additional information.
Operating and Capital Expenditure Requirements
We believe that our existing cash balances will be sufficient to meet our anticipated cash requirements through at least the next 12 months. In the future, we may require more working capital to meet our operating and capital expenditure needs. If our available cash balances are insufficient to satisfy our future liquidity requirements, we may seek to sell equity or convertible debt securities or borrow funds commercially.
Contractual Obligations, Commitments and Contingencies
Manufacturing Purchase Obligations
As of April, 2024, we had purchase obligations with our independent contract manufacturers of $35.4 million.
Except as described above, there were no other material changes in our contractual obligations, commitments and contingencies from those disclosed in our Annual Report on Form 10-K for the fiscal year ended January 31, 2024. Please see Item 7, “Management’s Discussion and Analysis of Financial Condition and Results of Operations – Contractual Obligations, Commitments and Contingencies” in our Annual Report on Form 10-K for the fiscal year ended January 31, 2024 for a description of our contractual obligations.
Off-Balance Sheet Arrangements
As of April 30, 2024, we did not engage in any off-balance sheet arrangements, including the use of structured finance, special purpose entities or variable interest entities.
Recent Authoritative Accounting Guidance
See Note 1 of Notes to Condensed Consolidated Financial Statements for information regarding recently issued accounting pronouncements.
Critical Accounting Policies and Significant Management Estimates
There have been no material changes to our critical accounting policies and estimates as compared to the critical accounting policies and estimates described in our Annual Report on Form 10-K for the 2024 fiscal year filed with the SEC on March 29, 2024.
ITEM 3. Quantitative and Qualitative Disclosures About Market Risk
There have been no material changes to the market risk as described in Part II, Item 7A. “Quantitative and Qualitative Disclosures About Market Risk” in our Annual Report on Form 10-K for the 2024 fiscal year filed with the SEC on March 29, 2024.
26
ITEM 4. Controls and Procedures
Evaluation of Disclosure Controls and Procedures
Our management, with the participation of our Principal Executive Officer and Principal Financial Officer, has evaluated the effectiveness of our disclosure controls and procedures as of the end of the period covered by this Quarterly Report on Form 10-Q. The term “disclosure controls and procedures” (as defined in Rules 13a-15(e) and 15d-15(e)) under the Exchange Act, means controls and other procedures of a company that are designed to ensure that information required to be disclosed by a company in the reports that it files or submits under the Exchange Act is recorded, processed, summarized and reported, within the time periods specified in the SEC’s rules and forms. Disclosure controls and procedures include, without limitation, controls and procedures designed to ensure that information required to be disclosed by a company in the reports that it files or submits under the Exchange Act is accumulated and communicated to the company’s management, including its principal executive and principal financial officers, as appropriate to allow timely decisions regarding required disclosure. Management recognizes that any controls and procedures, no matter how well designed and operated, can provide only reasonable assurance of achieving their objectives and management necessarily applies its judgment in evaluating the cost-benefit relationship of possible controls and procedures.
Based upon such evaluation, our Principal Executive Officer and Principal Financial Officer have concluded that due to the material weakness in our internal control over financial reporting described below, our disclosure controls and procedures were not effective as of April 30, 2024 at a reasonable assurance level. The material weakness did not result in a material misstatement to our interim consolidated financial statements for the period ended April 30, 2024.
Previously Identified Material Weakness in Internal Control Over Financial Reporting
As reported in Part II, Item 9A. “Controls and Procedures” in our Annual Report on Form 10-K for the fiscal year ended January 31, 2024, our management identified a material weakness in our internal control over financial reporting as of January 31, 2024, as we did not design and maintain effective controls over the accounting for income taxes. Specifically, we did not have tax personnel with the appropriate skills and level of experience to assess complicated tax matters, and we did not properly identify, risk assess, design and maintain effective controls related to the income tax provision, including controls related to the evaluation of tax deductions and recognition and measurement of deferred tax assets. This material weakness resulted in immaterial errors to the provision for income taxes, deferred tax assets, income taxes payable, and income tax disclosures which were adjusted in the Company’s consolidated financial statements for the fiscal year ended January 31, 2024. Additionally, this material weakness could result in a misstatement of the aforementioned account balances or disclosures that would result in a material misstatement in our annual or interim consolidated financial statements that would not be prevented or detected.
Remediation Plan Efforts
In order to remediate the material weakness described above, management continues to implement a remediation plan that includes implementing enhancements to our existing control activities with improved documentation standards, technical oversight and training, as well as, implementing enhanced review procedures in our income tax monitoring control. As we continue to evaluate and work to improve our internal control over financial reporting, we may determine to take additional measures to address the material weakness, including but not limited to, hiring of experienced personnel, as well as greater engagement of external subject matter experts on complex tax matters.
The material weakness described above will not be considered remediated until the internal controls described above have been implemented and operated effectively for a sufficient period of time for management to conclude, through testing, that they are effective.
Changes in Internal Control over Financial Reporting
Other than the remediation plan outlined above, there were no changes in the Company’s internal control over financial reporting during the quarter ended April 30, 2024, that have materially affected, or are reasonably likely to materially affect, our internal control over financial reporting.
Inherent Limitations of Disclosure Controls and Internal Control over Financial Reporting
Because of their inherent limitations, our disclosure controls and procedures and our internal control over financial reporting may not prevent material errors or fraud. A control system, no matter how well conceived and operated, can provide only reasonable, not absolute, assurance that the objectives of the control system are met. The effectiveness of our disclosure controls and procedures and our internal control over financial reporting is subject to risks, including that the controls may become inadequate because of changes in conditions or that the degree of compliance with our policies or procedures may deteriorate.
PART II – OTHER INFORMATION
27
ITEM 1. Legal Proceedings
We are not engaged in any material legal proceedings at this time. Refer to Note 14, Commitments and Contingencies, to the condensed consolidated financial statements included in Part I, Item 1 of this Quarterly Report on Form 10-Q.
ITEM 1A. Risk Factors
Certain factors may have a material adverse effect on our business, financial condition and results of operations. You should consider carefully the risks and uncertainties described below, in addition to other information contained in this Quarterly Report on Form 10-Q, including our unaudited condensed consolidated financial statements and related notes. The risks and uncertainties described below are not the only ones we face. Additional risks and uncertainties that we are unaware of, or that we currently believe are not material, may also become important factors that adversely affect our business. If any of the following risks actually occurs, our business, financial condition, results of operations, and future prospects could be materially and adversely affected. In that event, the trading price of our ordinary shares could decline, and you could lose part or all of your investment.
Summary of Risk Factors
Our business and our industry is subject to numerous risks and uncertainties, including those described in the following Risk Factors. These risks include, but are not limited to, the following:
28
29
Risks Related to Our Business and Our Industry
If our customers do not design our solutions into their product offerings, or if our customers’ product offerings are not commercially successful, our business would suffer.
We sell our video and image processing system-on-a-chip, or SoC, solutions to original equipment manufacturers, or OEMs, who include our SoCs in their products, and to original design manufacturers, or ODMs, who include our SoCs in the products that they supply to OEMs. We generally refer to ODMs as our customers and OEMs as our end customers, except as otherwise indicated or as the context otherwise requires. Our SoCs are generally incorporated into our customers’ products at the design stage, which is referred to as a design win. As a result, we rely on OEMs to design our solutions into the products that they design and sell. Without these design wins, our business would be significantly harmed. We often incur significant expenditures developing a new SoC solution without any assurance that any OEM will select our solution for design into its own product. Once an OEM designs a competitor’s device into its product, it becomes significantly more difficult for us to sell our SoC solutions to that OEM because changing suppliers involves significant cost, time, effort and risk for the OEM. We anticipate that it will take longer and require more resources and greater expenditures to achieve design wins, and likely take longer to generate revenue from such design wins, in the new markets we are targeting, such as the OEM automotive and robotics markets, than our legacy camera markets. We also face certain competitive disadvantages in these markets relative to larger competitors that have significantly more resources and a longer history working with OEMs and ODMs in these markets. In addition, trade tensions between the United States and China and potential new export restrictions may make it more difficult to secure future design wins with China customers.
Even if an OEM designs one of our SoC solutions into its product, we cannot be assured that the OEM’s product will be commercially successful over time or at all. For example, in the past we have secured design wins for customer products that were never commercially released by our customer or did not sell in volumes initially forecast by the customer, as a result of factors beyond our control. If products incorporating our SoC solutions are not commercially successful or experience rapid decline, our revenue and business will suffer. Similarly, if an OEM designs one of our SoC solutions into its product, we are not assured that we will receive or continue to receive new design wins from that OEM, which could negatively impact our business.
If we fail to penetrate new markets, including the automotive OEM and ADAS market, our revenue and financial condition could be harmed.
We believe that our future revenue growth, if any, significantly depends on our ability to expand within the Internet of Things, or IoT, camera markets with our new artificial intelligence, or AI, computer vision SoC solutions, and the OEM automotive, robotics and industrial markets. Our AI computer vision SoC solutions have functionality that may also be applicable to other developing markets, such as processing of large language models (LLMs). Each of these markets presents distinct and substantial risks and, in many cases, requires us to develop new functionality or software to address the particular requirements of that market. If any of these markets do not develop as we currently anticipate, the technical requirements of these markets evolve in ways we do not anticipate, the development of such markets is delayed or impacted by factors outside of our control, or if we are unable to penetrate them successfully with our solutions, our revenue could decline and our financial condition would be negatively impacted. Some of these markets are primarily served by only a few large, multinational OEMs with substantial negotiating power relative to us and, in some instances, with internal solutions that are competitive to our products. Meeting the technical requirements and securing design wins with any of these companies requires a substantial investment of our time and resources and we cannot assure you that we will secure design wins from these or other companies or that we will achieve meaningful revenue from the sales of our solutions into these markets. In addition, we face competition from larger competitors with greater resources and more history in these markets, which may put us at a competitive disadvantage to these larger competitors. If we fail to penetrate these or other new markets we are targeting, our financial condition would likely suffer. Moreover, if we are successful in achieving design wins in these new markets, it will likely take longer to generate revenue from such design wins than in our traditional markets.
If we fail to develop and introduce new or enhanced solutions that meet market requirements on a timely basis, our ability to attract and retain customers could be impaired and our competitive position could be harmed.
30
We operate in a dynamic environment characterized by rapidly changing technologies. To compete successfully, we must design, develop, market and sell enhanced solutions that provide increasingly higher levels of performance and functionality and that meet the technical and cost expectations of our customers. Our existing or future solutions could be rendered obsolete by the introduction of new products by our competitors; convergence of other markets with or into the camera market; the market adoption of products based on new or alternative technologies; the emergence of new industry standards applicable to our solutions; or the requirement of additional functionality included in video processors. In addition, some of the markets for our solutions are characterized by frequent introduction of next-generation and new products, short product life cycles, increasing demand for added functionality and significant price competition. As we develop and introduce new solutions, we also face the risk that customers may not value or be willing to bear the cost of incorporating these newer solutions into their products, particularly if they believe their customers are satisfied with current solutions. Regardless of the improved features or superior performance of the newer solutions, customers may be unwilling to adopt our new solutions due to design or pricing constraints. If we or our customers are unable to manage product transitions in a timely and cost-effective manner, our business and results of operations would suffer.
Our failure to anticipate or timely develop new or enhanced solutions in response to technological shifts could result in decreased revenue and our competitors achieving design wins that we sought. In particular, we may experience difficulties with product design, development of new software, manufacturing, marketing or qualification that could delay or prevent our development, introduction or marketing of new or enhanced solutions. In addition, for some markets, such as the automotive OEM market, we need to establish and maintain relationships with third-party suppliers or software providers in order to effectively market our solutions to end-customers. Failure to establish these relationships could harm our ability to achieve design wins. Delays in product development could impair our relationships with our customers and negatively impact sales of our solutions under development. If we fail to introduce new or enhanced solutions that meet the needs of our customers or penetrate new markets in a timely fashion, we will lose market share, and our operating results will be adversely affected.
Impacts of the global supply chain challenges could adversely affect our business, financial condition, and results of operations.
During the COVID-19 global pandemic, various restrictions were put in place causing a temporary decline in demand for certain items. As restrictions began easing across the world, an increase in demand for products containing semiconductor chips exacerbated bottlenecks in the supply chain, resulting in a global semiconductor supply shortage impacting our industry, which resulted in a lengthening of the manufacturing lead time for our products and impacting the normal forecasting and ordering patterns of our customers. To the extent customers face supply chain issues with respect to other components needed to pair with our products in order to produce their end products, such customers delayed orders of our products or hold inventory of our products for longer periods of time, resulting in a decline in our revenue. With respect to our suppliers, we experienced supply constraints for certain chips from Samsung. While these supply chain challenges have largely subsided, we may in the future experience similar issues.
Uncertain risks relating to the adoption, use or application of emerging technologies, including artificial intelligence, by our customers and in our business, could adversely impact our financial results and result in reputational harm and liability.
Many of our products support AI functionality implemented in our customers’ products, such as object detection, classification and tracking, image processing, and terrain mapping. Our latest generation of products also enable us to address computationally intense AI applications for deep fusion, deep planning, and large language models (LLMs) in edge devices. The adoption of AI solutions may not develop in the manner or in the time periods we anticipate and, as the markets for AI solutions are still developing, demand for these products may be unpredictable and vary significantly from one period to another. These factors may adversely impact demand for our AI related products. In addition, compliance with evolving government regulations worldwide related to AI may increase the costs related to the development of AI products and solutions and limit global adoption, which may also adversely impact demand for our AI related products.
31
Concerns relating to the responsible use of AI in our and our customers’ products may result in reputational and financial harm and liability. AI poses emerging ethical issues and presents risks and challenges that could affect its adoption, and therefore our business. If we or our customers enable or offer solutions that draw controversy due to their perceived or actual impact on society, such as AI solutions that have unintended consequences or are controversial, we may experience reputational harm, competitive harm, financial harm or legal liability.
Shortages in, or increased costs of, wafers and materials could adversely impact our gross margins and lead to reduced revenues.
Worldwide manufacturing capacity for silicon wafers is relatively inelastic. If the demand for silicon wafers or assembly material exceeds market supply, our supply of silicon wafers or assembly material could quickly become limited or prohibitively expensive. Silicon wafers constitute a material portion of our product cost and if we are unable to purchase wafers at favorable prices, our results of operations and financial condition will be adversely affected. The semiconductor industry recently experienced significant shortages of manufacturing capacity, which resulted in a lengthening of the manufacturing lead time for our products and which has at times harmed our revenue. While this capacity shortage has improved, lead times for our products remain longer than normal, which could negatively impact our ability to meet our customer’s demand for our products and have an adverse impact on our revenue, results of operations and customer relationships. We have also experienced, during times of supply chain capacity shortages, customers placing orders for our products that exceed their actual demand, which may lead to us manufacturing a surplus of products and could have a negative impact on our results of operations and cash reserves and lead to our customers having excess inventory.
Our primary inventory warehouse is located in Hong Kong and may be affected by continued political, social, health and economic conditions in Hong Kong.
We operate a warehouse facility in Hong Kong through which the substantial majority of our finished SoCs are shipped to customers or our logistic partners. Hong Kong has experienced, and continues to experience, political unrest and social strife in addition to the impact of the COVID-19 pandemic. The Bureau of Industry and Security, or BIS, of the U.S. Department of Commerce, or Commerce, imposes on Hong Kong the same stringent export and reexport controls applicable to China, including licensing requirements such as those applicable to SoCs and semiconductor end-uses. It is possible that the U.S. government may take future measures to impose stricter export controls or duties on shipments made to Hong Kong, which could harm our business, increase the cost of conducting our operations in Hong Kong or result in retaliatory actions against U.S. interests. While we have not been materially impacted by these problems to date, continued deterioration in political, social or economic conditions in Hong Kong or future unforeseen problems, including health pandemics, could affect deliveries of our SoCs to our customers or logistic partners, possibly resulting in business interruptions, substantially delayed or lost sales, loss of inventory, or increased expenses that cannot be passed on to customers, any of which could ultimately have a material adverse effect on our business and financial results. In addition, we could be forced to relocate our warehouse operations, either temporarily or permanently, to another potentially costlier location (or a location resulting in higher tax costs) or find alternative potentially costlier methods of shipping our finished SoCs to customers and logistic partners.
Our target markets may not grow or develop as we currently expect and are subject to market risks, any of which could harm our business, revenue and operating results.
We are focusing our development resources on addressing computer vision applications, primarily in the automotive and IoT markets. The application of computer vision functionality in these markets is relatively new, and we may be unable to predict the timing or development of these markets with accuracy. For example, a slower than expected adoption rate for AI technology in automotive or IP security camera applications could slow the demand for our new solutions. Similarly, changes in the projected growth rate for ADAS or autonomous driving technology in the automotive market due to government regulations or changes in consumer preferences could negatively impact demand for our solutions. If our key target markets do not grow, grow slower, or do not develop in ways that we currently expect, demand for our SoCs may not materialize as expected, and our business and operating results could suffer.
Our customers may cancel their orders, change production quantities or delay production. If we fail to accurately forecast demand for our solutions, revenue shortfalls or excess, obsolete or insufficient inventory could result.
32
Our customers typically do not provide us with firm, long-term purchase commitments. A substantial majority of our sales are made on a purchase order basis, which permits our customers to cancel, change or delay their product purchase commitments with little or no notice to us and often without penalty to them. Because production lead times often exceed the amount of time required by our customers to fill their orders, we often must build SoCs in advance of receiving orders from customers, relying on an imperfect demand forecast to project volumes and product mix. As a result of a number of factors, including longer manufacturing times for our products and increased demand from customers during fiscal year 2023, we increased our inventory levels. These factors have substantially subsided and we expect conditions to return to more stability in future periods.
Our SoCs are incorporated into products manufactured by or for our end customers, and as a result, demand for our solutions is influenced by the demand for our customers’ products. Our ability to accurately forecast demand can be adversely affected by a number of factors, including inaccurate forecasting by our customers, changes in market conditions including reductions in market activity due to pandemics, adverse changes in our product order mix and fluctuating demand for our customers’ products. Even after an order is received, our customers may cancel these orders, request a decrease in production quantities or request a delay in the delivery of our solutions. Any such cancellation, decrease or delay subjects us to a number of risks, most notably that our projected sales will not materialize on schedule or at all, leading to unanticipated revenue shortfalls and excess or obsolete inventory that we may be unable to sell to other customers.
Alternatively, if we are unable to project customer requirements accurately, we may not build enough SoCs, which could lead to delays in product shipments and lost sales opportunities in the near term, as well as force our customers to identify alternative sources, which could affect our ongoing relationships with these customers. In addition, the rapid pace of innovation in our industry could render portions of our inventory obsolete. Excess or obsolete inventory levels could result in unexpected expenses or increases in our reserves that could adversely affect our business, operating results and financial condition.
We depend on a limited number of customers and end customers for a significant portion of our revenue. If we fail to retain or expand our customer relationships, our revenue could decline.
We derive a significant portion of our revenue from a limited number of ODMs who build products on behalf of a limited number of OEMs and from a limited number of OEMs to whom we ship directly. We anticipate that this customer concentration will continue for the foreseeable future. In fiscal year 2024, the customers representing 10% or more of our revenue were WT Microelectronics Co., Ltd., or WT, which serves as our non-exclusive sales representative and fulfillment partner in Asia other than Japan, and Chicony Electronics Co., Ltd., or Chicony, one ODM which manufactures devices incorporating our solutions on behalf of multiple end-customers, accounted for approximately 53% and 14% of total revenue, respectively. For the three months ended April 30, 2024, the customers representing 10% or more of our revenue were WT and Chicony which accounted for approximately 62% and 13% of total revenue, respectively. In addition, we believe that revenue from our top 10 end customers, either directly or through a distributor or an ODM, accounted for approximately 51% of our total revenue in fiscal year 2024 and accounted for approximately 58% of our total revenue for the three months ended April 30, 2024. We believe that our operating results in the near term will continue to depend on sales to a relatively small number of customers and end customers. In the future, these customers may decide not to purchase our SoC solutions at all, may purchase fewer solutions than they did in the past or may alter their purchasing patterns. As substantially all of our sales to date have been made on a purchase order basis, these customers may cancel, change or delay product purchase commitments with little or no notice to us and often without penalty and may make our revenue volatile from period to period, which has happened in the past. The loss of a significant customer, or substantial reduction in purchases by a significant customer, could happen again at any time and without notice, and such loss would likely harm our financial condition and results of operations. Moreover, because several of our largest OEM customers have a dominant position in their markets, a loss of a significant customer may not be easily replaced.
Achieving design wins is subject to lengthy competitive selection processes that require us to incur significant costs. Even if we begin a product design, a customer may decide to cancel or change its product plans, resulting in no revenue from such expenditures.
We are focused on selling our SoC solutions to ODMs and OEMs for incorporation into their products at the design stage. These efforts to achieve design wins typically are lengthy, especially in emerging markets, such as the OEM automotive market, and in any case can require us to both incur design and development costs and dedicate scarce engineering resources in pursuit of a single customer opportunity. We may not prevail in the competitive selection process, and even when we do achieve a design win, we may never generate any revenue despite incurring development expenditures. In addition, even if an OEM designs one of our SoC solutions into one of its products, we cannot be assured that we will secure new design wins from that OEM for future products. Further, even after securing a design win, we have experienced and may again experience delays in generating revenue from our solutions as a result of the lengthy product development cycle typically required, if we generate any revenue at all as a result of any such design win.
33
Our customers generally take a considerable amount of time to evaluate our solutions. The typical time from early engagement by our sales force to actual product introduction runs from nine to 12 months for IoT markets and potentially significantly longer in the OEM automotive, robotics and industrial markets. The delays inherent in these lengthy sales cycles increase the risk that a customer will decide to cancel, curtail, reduce or delay its product plans, causing us to lose anticipated sales. In addition, any delay or cancellation of a customer’s plans could harm our financial results, as we may have incurred significant expense and generated no revenue. If we were unable to generate revenue after incurring substantial expenses to develop any of our solutions, our business would suffer.
Some of our customers may require our products and our third-party contractors to undergo a qualification process that does not assure product sales. If we are unsuccessful or delayed in qualifying these products or third-party contractors with a customer, our business and operating results could suffer.
Prior to purchasing our products, some of our customers, particularly in the automotive market, may require that our products and our third-party contractors undergo extensive qualification processes, which involve testing of our products in the customers’ systems, as well as testing for reliability of our products and our supply chain. This qualification process may take several months and qualification of a product by a customer does not assure any sales of the product to that customer. Even after successful qualification and sales of a product to a customer, a subsequent revision in our third party contractors’ manufacturing process or our selection of a new supplier may require a new qualification process, which may result in delays and in our holding excess or obsolete inventory. After our products are qualified, it can take several months or more before the customer commences volume production of components or systems that incorporate our products. Despite these uncertainties, we devote substantial resources, including design, engineering, sales, marketing and management efforts, to qualify our products with customers in anticipation of sales. If we are unsuccessful or delayed in qualifying these products with a customer, sales of the products to the customer may be precluded or delayed, which may impede our growth and cause our business to suffer.
We expect competition to increase in the future, which could have an adverse effect on our revenue and market share.
The global semiconductor market in general, and the computer vision and video/image processing markets in particular, are highly competitive. We compete in different target markets to various degrees on the basis of a number of competitive factors, including our solutions’ performance, features, energy efficiency, size, ease with which our solution may be integrated into our customers’ products, customer support, reliability and price, as well as on the basis of our reputation. We expect competition to increase and intensify as more and larger semiconductor companies enter our markets and as existing competitors improve or expand their product offerings. We also expect that the trend among large OEMs to seek to develop their own semiconductor solutions will continue and expand, particularly in camera markets experiencing consolidation, such as the IP security market. In addition, in our newer markets, such as the OEM automotive and robotics markets, we will face competition from larger competitors with greater resources, longer histories in these markets and established relationships with OEMs and ODMs. Increased competition could result in price pressure, reduced profitability and loss of market share, any of which could harm our business, revenue and operating results.
Our competitors range from large, international companies with greater resources offering a wide range of semiconductor products to smaller, nimble companies specializing in narrow markets. In the IoT market, our primary competitors include AMLogic Inc., Fuzhou Rockchip Electronics Co., Ltd., HiSilicon Technologies Co., Ltd., or HiSilicon, which is owned by Huawei Technologies Co., Ingenic Semiconductor Co., Ltd., Novatek Microelectronics Corp., or Novatek, NVIDIA Corporation, or NVIDIA, OmniVision Technologies, Inc., Qualcomm Incorporated, or Qualcomm, SigmaStar Technology Corp., and Socionext Inc. In the automotive camera market, we compete against Allwinner Technology Co., Ltd., Horizon Robotics Inc., iCatch Technology, Inc., Mobileye, a subsidiary of Intel Corporation, Novatek, NVIDIA, NXP Semiconductors N.V., Qualcomm, Renesas Electronics Corporation, and Texas Instruments. Certain of our customers and suppliers also have divisions that produce products competitive with ours and other customers may seek to vertically integrate competitive solutions in the future. In addition, certain third-party developers of technology competitive to our solutions have licensed their technology, including image signal processing and computer vision IP, which potentially enables a greater number of competitors to offer competitive solutions.
Our ability to compete successfully depends on elements both within and outside of our control. Many of our competitors are substantially larger, have greater financial, technical, marketing, distribution, customer support and other resources, are more established than we are and have significantly better brand recognition and broader product offerings than us, which may enable them to develop and enable new technology into product solutions better or faster than us and to better withstand adverse economic or market conditions in the future. Our ability to compete will depend on a number of factors, including:
34
Our competitors may also establish cooperative relationships among themselves or with third parties or acquire companies that provide similar products to ours. As a result, new competitors or alliances may emerge that could acquire significant market share. Any of these factors, alone or in combination with others, could harm our business and result in a loss of market share and an increase in pricing pressure.
A breach of our security systems may have a material adverse effect on our business.
Our security systems are designed to maintain the physical security of our facilities and information systems and protect our customers’, suppliers’ and employees’ confidential information. Accidental or willful security breaches or incidents or other unauthorized access by third parties to our facilities or our information systems or the existence of computer viruses or other malicious code or security vulnerabilities in our data or software could expose us to a risk of loss, unavailability, misappropriation and other unauthorized processing of proprietary and confidential information. The costs to us to eliminate or alleviate cyber or other security problems, bugs, viruses, ransomware and other malicious software programs and security vulnerabilities could be significant, and our efforts to address these problems may not be successful and could result in interruptions and delays that may impede our sales, product distribution, financial reporting or other critical functions. In addition, we could incur significant costs in notifying affected persons and entities and otherwise complying with the multitude of foreign, federal, state and local laws and regulations relating to the unauthorized access to, or use or disclosure of, personal information.
Security breaches and incidents, computer malware and computer hacking attacks have become more prevalent and sophisticated. These threats are constantly evolving, making it increasingly difficult to successfully defend against or implement adequate preventive measures, and we may face difficulties or delays in identifying and otherwise responding to any security breach or incident. Moreover, remote work by our personnel and remote access to our systems have increased significantly, which also increases our cybersecurity risk profile. We expect to incur significant costs in an effort to detect and prevent security breaches and incidents, and we may face increased costs and requirements to expend substantial resources in the event of an actual or perceived security breach or incident. Our policies and security measures cannot guarantee security, and our IT infrastructure, including our networks and systems, may be vulnerable to security breaches and incidents, cyber-attacks, or fraud. Third parties have attempted, and will likely continue to attempt, to penetrate and/or infect our network and systems with malicious software and phishing attacks in an effort to gain access to our network and systems. Experienced computer programmers and hackers may be able to penetrate our security controls and misappropriate or compromise our confidential information or that of third parties or create system disruptions. Computer programmers and hackers also may be able to deploy viruses, worms and other malicious software programs that attack our information systems and cause disruptions of our business. For portions of our IT infrastructure, we rely on products and services provided by third parties. These third-party products and services relate to, among other things, human resources, electronic communication services and some finance functions, and we are, of necessity, dependent on the security systems of these third-party providers. These third-party service providers are subject to similar, and in certain cases greater, security threats than we face. These third-party providers may also experience breaches, incidents, and attacks compromising or otherwise impacting their products, and their products may contain security vulnerabilities, each of which could impact our systems, and unauthorized access to the systems of our cloud-based service providers, any other security breaches or incidents impacting such systems, or the existence of computer viruses, ransomware or other malicious code in their data or software could expose us to a risk of loss, misappropriation, unavailability and other unauthorized processing of information. Data security breaches and incidents may also result from non-technical means, including, for example, intentional malfeasance or negligence by an employee or contractor. Any data security breach or incident or theft, misuse, loss, unavailability or other unauthorized processing of this information, or the perception that any of these matters has occurred, could result in, among other things, damage to our reputation, allegations by our customers that we have not performed our contractual obligations, regulatory investigations and other proceedings, litigation by affected parties and possible
35
penalties, damages, and other liabilities, any of which could have a material adverse effect on our business, financial condition, our reputation, and our relationships with our customers and partners. We may also encounter or be subject to bugs, errors, or hacking or other events resulting in system interruptions or other disruptions, corruption or loss of data, an inability to accurately process or record transactions, and security or technical reliability issues. All of these could harm our ability to conduct core operating functions such as product development, customer support, processing purchase orders and invoices, processing payroll, product distribution, recording and reporting financial and management information on a timely and accurate basis, and could impact our internal control compliance efforts. Due to conflicts and geopolitical events such as the ongoing hostility between Russia and Ukraine, we and our vendors, contractors, and other third parties we work with are vulnerable to a heightened risk of cybersecurity attacks, phishing attacks, viruses, malware, ransomware, hacking or similar breaches and incidents from nation-state and affiliated actors, including attacks that could materially disrupt our supply chain and our systems and operations.
Additionally, we cannot be certain that our insurance coverage will be adequate or otherwise protect us with respect to claims, expenses, fines, penalties, business loss, data loss, litigation, regulatory actions, or other impacts arising from security breaches or incidents, or that such coverage will continue to be available on acceptable terms or at all. Any of these results could adversely affect our business, financial condition, and operating results.
While we intend to continue to invest in research and development, we may be unable to make the substantial investments that are required to remain competitive in our business.
The semiconductor industry requires substantial investment in research and development in order to bring to market new and enhanced solutions. Our research and development expense was $215.1 million, $204.9 million and $167.3 million in fiscal years 2024, 2023 and 2022, respectively. For the three months ended April 30, 2024, our research and development expense was $54.1 million. In general, we expect to increase our research and development expenditures in future periods as compared to prior periods as part of our strategy of focusing on the development of innovative computer vision, video and image processing solutions with increased functionality, and as we target key markets, such as the automotive OEM and robotics markets. We are unable to predict whether we will have sufficient resources to achieve the level of investment in research and development required to remain competitive. For example, development in the latest process nodes, such as 5 nanometer, or nm, or smaller, costs significantly more than required to develop in larger process nodes, such as 14 or 10nm. This added cost could prevent us from being able to maintain a technology advantage over larger competitors that have significantly more resources to invest in research and development. In addition, we cannot assure you that the technologies which are the focus of our research and development expenditures will become commercially successful or generate any revenue.
The loss of any of our key personnel could seriously harm our business.
We believe our future success depends in large part upon the continuing services of the members of our senior management team and various engineering and other technical personnel. If one or more of our senior executives or other key personnel are unable or unwilling to continue in their present positions, we may not be able to replace them easily or at all, our business may be disrupted, and our financial condition and results of operations may be materially and adversely affected. In addition, if any member of our senior management team or any of our other key personnel joins a competitor or forms a competing company, we may experience material disruption of our operations and development plans and lose customers, know-how and key professionals and staff members, and we may incur increased operating expenses as the attention of other senior executives is diverted to recruit replacements for key personnel.
We rely on highly skilled personnel and, if we are unable to hire, retain or motivate key personnel, we may not be able to grow effectively.
Our performance largely depends on the talents and efforts of highly skilled individuals. Our future success depends on our continuing ability to identify, hire, develop, motivate, and retain highly skilled personnel for all areas of our organization. Our industry is characterized by high demand and intense competition for talent, particularly for engineering personnel. The pool of qualified candidates is limited, particularly in Silicon Valley and parts of Asia for very-large-scale integration, or VLSI, and artificial intelligence and computer vision engineers, and certain of our competitors and potential competitors with greater resources have directly targeted our employees. In addition, we also face competition in hiring artificial intelligence engineers, including from companies with which we do not directly compete. Our compensation arrangements, such as our equity award programs, may not always be successful in attracting new employees and retaining and motivating our existing employees. Our continued ability to compete effectively, and to grow our business, depends on our ability to attract new employees and to retain and motivate our existing employees.
36
The average selling prices of semiconductor solutions in our target markets have typically decreased over time and will likely do so in the future, which could harm our revenue and gross margins.
Average selling prices of semiconductor products in the markets we serve have historically decreased over time, and we expect such declines to occur for our solutions over time. Our gross margins and financial results will suffer if we are unable to offset reductions in our average selling prices by reducing our costs, developing new or enhanced SoC solutions, such as our new AI computer vision-based solutions, on a timely basis with higher selling prices or gross margins, or increasing our sales volumes. Additionally, because we do not operate our own manufacturing, assembly or testing facilities, we may not be able to reduce our costs as rapidly as companies that operate their own facilities, and our costs may even increase, which could also reduce our gross margins. In the past, we have reduced the prices of our SoC solutions in anticipation of future competitive pricing pressures, new product introductions by us or our competitors and other factors. We expect that we will have to address pricing pressures again in the future, particularly in markets experiencing consolidation, which could require us to reduce the prices of our SoC solutions and harm our operating results.
If we are unable to manage any future growth, we may not be able to execute our business plan and our operating results could suffer.
Our business has grown rapidly in the past. Our future operating results depend to a large extent on our ability to successfully manage any expansion and growth, including the challenges of managing a company with an executive management team in the United States and the majority of its employees in Asia. We are increasing our investment in research and development and other functions to grow our business and address new markets, such as the OEM automotive and robotics markets. To manage growth successfully, we believe we must effectively, among other things:
We are likely to incur the costs associated with any increased investments earlier than some of the anticipated benefits, and the return on these investments, if any, may be lower, may develop more slowly than we expect or may not materialize. If we are unable to manage growth effectively, we may not be able to take advantage of market opportunities or develop new solutions, and we may fail to satisfy customer product or support requirements, maintain product quality, execute our business plan or respond to competitive pressures.
Deterioration of the financial conditions of our customers could adversely affect our operating results.
Deterioration of the financial condition of our distributors or customers could adversely impact our collection of accounts receivable. For the fiscal year ended January 31, 2024, the customers representing 10% or more of revenue were WT and Chicony, which accounted for approximately 53% and 14% of total revenue, respectively. As of January 31, 2024, accounts receivable with WT and Chicony were approximately $10.3 million and $7.0 million, respectively. For the three months ended April 30, 2024, the customers representing 10% or more of revenue were WT and Chicony, which accounted for approximately 62% and 13% of total revenue, respectively. As of April 30, 2024, accounts receivable with WT and Chicony were approximately $13.8 million and $7.4 million, respectively. We regularly review the collectability and creditworthiness of our distributors and customers to determine an appropriate allowance for credit losses. Based on our review of our distributors and customers, we currently have only immaterial reserves for uncollectible accounts. If our uncollectible accounts, however, were to exceed our current or future allowance for credit losses, our operating results and cash flows would be negatively impacted.
We are subject to the cyclical nature of the semiconductor industry.
37
The semiconductor industry is highly cyclical and is characterized by constant and rapid technological change, rapid product obsolescence, price erosion, evolving standards, short product life cycles and wide fluctuations in product supply and demand. Cyclical downturns have been characterized by diminished product demand, production overcapacity, high inventory levels and accelerated erosion of average selling prices, which could harm our business and operating results. We are dependent on the availability of third-party foundry and assembly capacity to manufacture and assemble our SoC solutions. None of our third-party foundry or assembly contractors has provided assurances that adequate capacity will be available to us in the future. The semiconductor industry recently experienced significant shortages of capacity, which resulted in a lengthening of the manufacturing lead time for our products. Such capacity shortages could negatively impact our ability to meet our customers’ demand for our products and have an adverse impact on our revenue, results of operations and customer relationships. We have also experienced, during times of supply chain capacity shortage, customers placing orders for our products that exceed their actual demand, which may lead to us manufacturing a surplus of products and could have a negative impact on our results of operations and cash reserves. Recent supply chain challenges have largely subsided and we expect conditions to return to more stability in future periods.
The complexity of our solutions could result in unforeseen delays or expenses from undetected defects, errors or bugs in hardware or software which could reduce the market adoption of our new solutions, damage our reputation with current or prospective customers and adversely affect our operating costs.
Highly complex SoC solutions such as ours frequently contain defects, errors and bugs when they are first introduced or as new versions are released. We have in the past and may in the future experience these defects, errors and bugs. If any of our solutions have reliability, quality or compatibility problems, we may not be able to successfully correct these problems in a timely manner or at all. In addition, if any of our proprietary features contain defects, errors or bugs when first introduced or as new versions of our solutions are released, we may be unable to timely correct these problems. Consequently, our reputation may be damaged and customers may be reluctant to buy our solutions, which could harm our ability to retain existing customers and attract new customers, and could adversely affect our financial results. In addition, these defects, errors or bugs could interrupt or delay sales to our customers. If any of these problems are not found until after we have commenced commercial production of a new product, we may incur significant additional development costs and product recall, repair or replacement costs. These problems may also result in claims against us by our customers or others.
We may experience difficulties in transitioning to new wafer fabrication process technologies or in achieving higher levels of design integration, which may result in reduced manufacturing yields, delays in product deliveries and increased costs.
We aim to use the most advanced manufacturing process technology appropriate for our products that is available from our third-party foundries. As a result, we periodically evaluate the benefits of migrating our solutions to smaller geometry process technologies in order to improve performance and reduce costs. We believe this strategy will help us remain competitive. We may face difficulties, delays and increased expense as we transition our products to new processes, such as the 4nm or 3nm process nodes, and potentially to new foundries. We currently depend on Samsung, as the principal foundry for our products, to transition to new processes successfully. We cannot assure you that Samsung will be able to effectively manage such transitions or that we will be able to maintain our relationship with Samsung or develop relationships with new foundries. Moreover, as we utilize more advanced process nodes beyond 5nm, we are increasingly dependent upon a very small number of foundries currently available for certain advanced process technologies. If we or our foundry vendors experience significant delays in transitioning to smaller geometries or fail to efficiently implement transitions, we could experience reduced manufacturing yields, delays in product deliveries and increased costs, all of which could harm our relationships with our customers and our operating results.
Rapidly changing industry standards could make our video and image processing solutions obsolete, which would cause our operating results to suffer.
We design our video and image processing solutions to conform to video compression standards, including MPEG-2, H.264 Advanced Video Coding (AVC) and H.265 High Efficiency Video Coding (HEVC), set by industry standards setting bodies such as ITU-T Video Coding Experts Group and the ISO/IEC Moving Picture Experts Group. Generally, our solutions comprise only a part of a camera device. All components of these devices must uniformly comply with industry standards in order to operate efficiently together. We depend on companies that provide other components of the devices to support prevailing industry standards. Many of these companies are significantly larger and more influential in driving industry standards than we are. Some industry standards may not be widely adopted or implemented uniformly, and competing standards may emerge that may be preferred by our customers or by consumers. If our customers or the suppliers that provide other device components adopt new or competing industry standards with which our solutions are not compatible, or if the industry groups fail to adopt standards with which our solutions are compatible, our existing solutions would become less desirable to our customers. If our solutions are not in compliance with prevailing industry standards for a significant period of time, we could miss opportunities to achieve crucial design wins, which could harm our business.
38
As a result, our sales would suffer, and we could be required to make significant expenditures to develop new SoC solutions to ensure compliance with relevant standards.
Pandemics, epidemics, or other widespread public health crises have had, and may in the future have, an adverse impact upon our business, results of operations, and financial condition.
A future pandemic, epidemic, health crisis, or other outbreak of disease, including the emergence of new COVID-19 variants, may negatively and materially impact our business, results of operations, and financial condition, due to:
The COVID-19 pandemic created worldwide uncertainty and significantly and negatively impacted the global economy which caused significant uncertainty and volatility in global financial markets and the trading prices for the common stock of technology companies, including ours. The pandemic impacted our workforce and the operations of our customers and suppliers. In response to the pandemic and related government measures, we implemented safety measures to protect our employees and contractors at our locations around the world and may be required to take similar action in the future.
The potential impact that a future pandemic, epidemic, health crisis, or other outbreak of disease, including the emergence of new COVID-19 variants, could have on our business, results of operations, and financial condition, and on the other risk factors described in this “Risk Factors” section, may be difficult to predict.
Some of our operations and a significant portion of our customers and our subcontractors are located outside of the United States, which subjects us to additional risks, including increased complexity and costs of managing international operations and geopolitical instability.
We have research and development design centers and business development offices in China, Germany, Italy, Japan, South Korea and Taiwan, and we expect to continue to conduct business with companies that are located outside the United States, particularly in Asia. We purchase wafers from foreign foundries, have our solutions assembled and tested by subcontractors located in Asia, and supply our solutions to customers located outside of the United States. Even customers of ours that are based in the United States often use contract manufacturers based in Asia to manufacture their products, and these contract manufacturers typically purchase products directly from us. As a result of our international focus, we face numerous challenges and risks, including:
39
Any acquisitions we may make in the future could disrupt our business, cause dilution to our shareholders, reduce our financial resources and harm our business.
Prior to our acquisition of Oculii in 2021, we had not made any acquisitions since our acquisition of VisLab S.r.l. in 2015. Our ability to make and successfully integrate acquisitions is largely unproven. Any future acquisitions may not strengthen our competitive position and may be viewed negatively by our customers, financial markets or investors, and we may not achieve our goals in a timely manner, or at all. In addition, any acquisitions we make could lead to difficulties in integrating personnel, technologies and operations from the acquired businesses and in retaining and motivating key personnel from these businesses. Acquisitions may disrupt our ongoing operations, divert management from their primary responsibilities, subject us to additional liabilities, increase our expenses and adversely impact our business, operating results, financial condition and cash flows. Acquisitions may also reduce our cash available for operations and other uses, and could also result in an increase in amortization expense related to identifiable assets acquired, potentially dilutive issuances of equity securities or the incurrence of debt, any of which could harm our business.
The complexity of calculating our tax provision may result in errors that could result in restatements of our financial statements.
We are incorporated in the Cayman Islands and our operations are subject to income and transaction taxes in the United States, China, Hong Kong, Germany, Italy, Japan, South Korea, Taiwan and other jurisdictions in which we do business. Due to the complexity associated with the calculation of our tax provision, we have hired independent tax advisors to assist us. If we or our independent tax advisors fail to resolve or fully understand certain issues, there may be errors that could result in us having to restate our financial statements. The risk of errors may be exacerbated by the significant number of tax law changes recently enacted in the United States and other jurisdictions. Restatements are generally costly and could adversely impact our results of operations or have a negative impact on the trading price of our ordinary shares.
Climate change and climate change-related policies and regulations may have a long-term impact on our business.
Global climate change is causing, and is projected to continue to cause, an increase in the frequency and intensity of certain natural disasters. Additionally, adverse weather, such as drought, wildfires, severe storms, sea-level rise, flooding, heat waves and cold waves, may occur, more frequently and/or with greater intensity. Such extreme events are driving changes in market dynamics, and local, national and international policies and regulations, which could result in disruptions to us, our suppliers, customers, and employees. These disruptions could make it more difficult and costly for us to deliver our products, obtain components or other supplies through our supply chain, maintain, or resume operations or perform other critical corporate functions, and could reduce customer demand for our products.
40
The increasing concern over climate change could also result in shifting customer preferences. If we fail to manage changes in customer expectations in an effective manner, demand for our products could diminish, and our financial performance could suffer. Additionally, new laws or regulations enacted to address climate change that are more stringent than current legal or regulatory requirements may increase our compliance burdens and costs, including indirect costs that are passed on to us from our customers or suppliers. Climate change also may reduce the availability or increase the cost of insurance for negative impacts of natural disasters by contributing to an increase in the frequency and severity of such natural disasters. Ultimately, the impacts of climate change, whether involving physical risks (such as disruptions resulting from climate-related events) or transition risks (such as regulatory changes, changes in market dynamics or increased operating costs, including the cost of insurance) are expected to be widespread and unpredictable and may materially and adversely affect our business and financial results.
Risks Related to Our Financial Performance or Results
Fluctuations in our operating results on a quarterly and annual basis could cause the market price of our ordinary shares to decline.
Our revenue and operating results have fluctuated significantly from period to period in the past and are likely to do so in the future. As a result, you should not rely on period-to-period comparisons of our operating results as an indication of our future performance. It is also possible that our normal seasonal patterns will be impacted by ongoing macroeconomic uncertainty, lingering effects of pandemics, supply chain disruptions and semiconductor capacity shortages, including the buildup of inventory by customers in response to such shortages, and continued high inflation. In future periods, our forecasted or actual revenue and results of operations may be below the expectations of analysts and investors, which could cause the market price of our ordinary shares to decline.
Factors that may affect our operating results include:
41
Moreover, the semiconductor industry has historically been cyclical in nature, reflecting overall economic conditions as well as budgeting and buying patterns of consumers. For example, the semiconductor industry recently experienced significant shortages of capacity, which resulted in a lengthening of the manufacturing lead time for our products and could be impacting the normal forecasting and ordering patterns of our customers. In recent periods, some customers have indicated they are reducing their inventory levels as lead times for semiconductor chips and other components used by customers shrink, which has reduced, and may continue to reduce, such customers’ demand for our products in future periods. We expect these cyclical conditions to continue. As a result, our quarterly operating results are difficult to predict, even in the near term. Our expense levels are relatively fixed in the short term and are based, in part, on our expectations of future revenue. If revenue levels are below our expectations, we may experience material adverse impacts on our business, including declines in margins, profitability and cash flows, or incur losses.
If we do not generate revenue growth, we may not be able to execute our business plan and our operating results could suffer.
We believe that our future revenue growth, if any, will significantly depend on our ability to expand within our existing IoT camera markets, such as the existing professional and home security and monitoring camera markets, and successfully penetrate new markets, such as the OEM automotive, robotics and industrial markets, with our new AI computer vision-based SoC solutions. We believe that executing upon our business plan requires us to continue to develop new SoCs and new software to address the particular requirements of these markets. Accordingly, we continue to invest in the development of new technology and solutions and expect our research and development expenditures to increase compared to prior periods. If we are unable to generate or maintain adequate revenue growth, our financial results could suffer and we may not be able to continue to invest in the development of new technology and solutions required to be successful.
We may have difficulty accurately predicting our future revenue and appropriately budgeting our expenses.
The rapidly evolving nature of the markets in which we sell our solutions, combined with substantial uncertainty concerning how these markets may develop, the considerable amount of time our customers generally take to evaluate our solutions, and other factors beyond our control, limits our ability to accurately forecast quarterly or annual revenue. In the recent years, we expanded our staffing and increased our expenditures in anticipation of future revenue growth. If our revenue does not increase as anticipated, we could incur significant losses and declines in our cash reserves due to our higher expense levels if we are not able to decrease our expenses in a timely manner to offset any shortfall in future revenue. Continued or persistent losses may require us to obtain additional capital that may not be available on reasonable terms or at all.
Changes to financial accounting standards may affect our results of operations and could cause us to change our business practices.
We prepare our consolidated financial statements to conform to generally accepted accounting principles, or GAAP, in the United States. These accounting principles are subject to interpretation by the American Institute of Certified Public Accountants, the SEC and various bodies formed to interpret and create accounting rules and regulations. Changes in those accounting rules could have a significant effect on our financial results, require significant resources, pose challenges in forecasting revenue and may affect our reporting of transactions completed before a change is announced. Changes to those rules or the questioning of current practices may adversely affect our reported financial results or the way we conduct our business.
Fluctuations in exchange rates between and among the currencies of the countries in which we do business may adversely affect our operating results.
Our sales have been historically denominated in U.S. dollars. An increase in the value of the U.S. dollar relative to the currencies of the countries in which our end customers operate could impair the ability of our end customers to cost-effectively integrate our SoCs into their devices which may materially affect the demand for our solutions and cause these end customers to reduce their orders, which would adversely affect our revenue and business. We may experience foreign exchange gains or losses due to the volatility of other currencies compared to the U.S. dollar. A significant portion of our solutions are sold to customers located outside the United States, primarily in Asia. Sales to customers in Asia accounted for approximately 79%, 79% and 86% of our total revenue in fiscal years 2024, 2023 and 2022, respectively. For the three months ended April 30, 2024, sales to customers in Asia accounted for approximately 85% of our total revenue. Because most of our end customers or their ODM manufacturers are located in Asia, we anticipate that a majority of our future revenue will continue to come from sales to that region. Although a large percentage of our sales are made to customers in Asia, we believe that a significant number of the products designed by these customers and incorporating our SoCs are then sold to consumers globally. In addition, if in the future we sell products or purchase inventory in currencies other than the U.S. dollar, our exposure to foreign currency risk could become more significant.
42
A significant number of our employees are located in Asia, principally Taiwan and China, and Europe. Therefore, a portion of our payroll as well as certain other operating expenses are paid in currencies other than the U.S. dollar, such as the New Taiwan Dollar, the Chinese Yuan Renminbi and the Eurozone Euro. Our operating results are denominated in U.S. dollars and the difference in exchange rates in one period compared to another may directly impact period-to-period comparisons of our operating results. Furthermore, currency exchange rates, particularly the exchange rates between the Chinese Yuan Renminbi and the U.S. dollar, between the New Taiwan Dollar and the U.S. dollar, and between the Eurozone Euro and the U.S. dollar, have been volatile in the recent past and these currency fluctuations may make it difficult for us to predict our operating results.
We have not implemented any hedging strategies to mitigate risks related to the impact of fluctuations in currency exchange rates. Even if we were to implement hedging strategies, not every exposure can be hedged and, where hedges are put in place based on expected foreign exchange exposure, they are based on forecasts which may vary or which may later prove to have been inaccurate. Failure to hedge successfully or anticipate currency risks accurately could adversely affect our operating results.
We cannot predict our future capital needs, and we may not be able to obtain additional financing to fund our operations.
We may need to raise additional funds in the future. Any required additional financing may not be available on terms acceptable to us, or at all. If we raise additional funds by issuing equity securities or convertible debt, investors may experience significant dilution of their ownership interest, and the newly-issued securities may have rights senior to those of the holders of our ordinary shares. If we raise additional funds by obtaining loans from third parties, the terms of those financing arrangements may include negative covenants or other restrictions on our business that could impair our operational flexibility and would also require us to incur interest expense. If additional financing is not available when required or is not available on acceptable terms, we may have to scale back our operations or limit our production activities, and we may not be able to expand our business, develop or enhance our products, take advantage of business opportunities or respond to competitive pressures which could result in lower revenue and reduce the competitiveness of our products.
Our marketable securities portfolio could experience a decline in market value or otherwise become illiquid, which could materially and adversely affect our financial results.
As of April 30, 2024, we had approximately $97.0 million in money market funds and debt security investments and $12.9 million in fixed deposit accounts. The debt security investments consisted of commercial paper, corporate bonds, asset-backed securities and U.S. government securities. We currently do not use derivative financial instruments to adjust our investment portfolio risk or income profile. These investments, as well as any cash deposited in bank accounts, are subject to general credit, liquidity, market and interest rate risks, which may be exacerbated by unusual events, such as the pandemics or widespread public health problems, the Eurozone crisis and the U.S. debt ceiling crisis, which affected various sectors of the financial markets and led to global credit and liquidity issues. For example, in March 2023, Silicon Valley Bank (SVB) was closed and the Federal Deposit Insurance Corporation (FDIC) was appointed as receiver. At the time of closing on March 10, 2023, we had cash deposits with SVB of approximately $17.0 million. We also had cash equivalents and marketable debt security investments residing in custodial accounts held by U.S. Bank for which SVB Asset Management was the investment advisor until March 15, 2023. While we were able to recover all deposited amounts from SVB, there can be no assurance that our current or future banks will not face similar risks as SVB or that we will be able to recover in full our deposits in the event of similar closures. We regularly maintain cash balances that are not insured or are in excess of the FDIC’s insurance limit. If the global financial markets continue to experience volatility or deteriorate, our investment portfolio may be impacted and some or all of our investments may become illiquid or otherwise experience loss which could adversely impact our financial results and position. To the extent that we increase the amount of our security investments in the future, these risks would be exacerbated.
43
Risks Related to Our Dependence on Third Parties
We do not have long-term supply contracts with our third-party manufacturing vendors, and they may not allocate sufficient capacity to us at reasonable prices to meet future demands for our solutions.
The semiconductor industry is subject to intense competitive pricing pressure from customers and competitors. Accordingly, any increase in the cost of our solutions, whether by adverse purchase price variances or adverse manufacturing cost variances, will reduce our gross margins and operating profit. We currently do not have long-term supply contracts with most of our primary third-party vendors, and we negotiate pricing with our main vendors on a purchase order-by-purchase order basis. Therefore, they are not obligated to perform services or supply product to us for any specific period, in any specific quantities, or at any specific price, except as may be provided in a particular purchase order. The ability of our foundry vendors to provide us with a product, which is solely sourced at each foundry, is limited by their available capacity, existing obligations and technological capabilities. Foundry capacity may not be available when we need it or at reasonable prices. None of our third-party foundry or assembly and test vendors have provided contractual assurances to us that adequate capacity will be available to us to meet our anticipated future demand for our solutions. In recent years, we experienced supply constraints at our primary foundry and assembly vendor resulting from industry wide supply chain challenges. These conditions have weakened and we expect conditions to stabilize in future periods.
Our foundry and assembly and test vendors may allocate capacity to the production of other companies’ products while reducing deliveries to us on short notice. In particular, other companies that are larger and better financed than we are or that have long-term agreements with our foundry or assembly and test vendors may cause our foundry or assembly and test vendors to reallocate capacity to them, decreasing the capacity available to us. Converting or transferring manufacturing from a primary location or supplier to a backup provider could be expensive and would likely take at least two or more quarters. There are only a few foundries, including Samsung and Taiwan Semiconductor Manufacturing Co., Ltd., or TSMC, that are currently available for certain advanced process technologies that we utilize or may utilize, such as 10nm or 5nm. Accordingly, as we continue to develop solutions in advanced process nodes, we will be increasingly dependent upon such foundries. The unavailability of one or both of these foundries could significantly impact our ability to produce our new products or delay production, which would negatively impact our business.
Our customers incorporate components supplied by multiple third parties, and a supply shortage or delay in delivery of these components could delay orders for our solutions by our customers.
Our customers purchase components used in the manufacture of their products from various sources of supply, often involving several specialized components, including lenses, sensors, microcontrollers, power management integrated circuits (PMICs), Wi-Fi chips, and memory chips. Any supply shortage or delay in delivery by third-party component suppliers, or a third-party supplier’s cessation or shut down of its business, may prevent or delay production of our customers’ products. As a result of delays in delivery or supply shortages of third-party components, orders for our solutions may be delayed or canceled and our business may be harmed. For example, the semiconductor industry recently experienced shortages of certain devices, including microcontrollers, PMICs, Wi-Fi chips, which impacted our customers’ ability to build their products and negatively impact our customers’ demand for our solutions. Similarly, our ability to generate design wins in some markets, such as the automotive OEM market, requires us to collaborate with third-party software suppliers in order to offer a complete solution to customers. Our inability to successfully collaborate with such third-party suppliers, or such suppliers’ inability to develop and deliver software, could harm our ability to achieve design wins and harm our business.
44
We outsource our wafer fabrication, assembly and testing operations to third parties, and if these parties fail to produce and deliver our products according to requested demands in specification, quantity, cost and time, our reputation, customer relationships and operating results could suffer.
We rely on third parties for substantially all of our manufacturing operations, including wafer fabrication, assembly and testing. Currently, the majority of our SoCs are supplied by Samsung in facilities located in Austin, Texas and South Korea, from whom we have the option to purchase both fully assembled and tested products as well as tested die in wafer form for assembly. Samsung subcontracts the assembly and initial testing of the assembled chips it supplies to us to Signetics Corporation and STATS ChipPAC Ltd. In the case of purchases of tested die from Samsung, we contract the assembly to Advanced Semiconductor Engineering, Inc., or ASE. Final testing of all of our products is handled by Sigurd Corporation or King Yuan Electronics Co., Ltd. under the supervision of our engineers. We depend on these third parties to supply us with material of a requested quantity in a timely manner that meets our standards for yield, cost and manufacturing quality. Availability of capacity within our supply chain tightened during fiscal year 2023, which at times limited the volume of products we can produce, negatively impacting our business and operations, and similar capacity constraints may adversely affect our business in the future. Moreover, because each SoC is fabricated in only one manufacturing facility, or single sourced, any disruption to a facility could cause significant delays in the production or shipment of the products produced in that facility that could not be easily offset by having such product(s) produced in another facility. We do not have any long-term supply agreements with any of our manufacturing suppliers. If one or more of these vendors terminates its relationship with us, or if we encounter any problems with our manufacturing supply chain, including available capacity constraints, our ability to ship our solutions to our customers on time and in the quantity required would be adversely affected, which in turn could cause an unanticipated decline in our sales and damage our customer relationships.
If, in the future, we enter into arrangements with suppliers that include additional fees to expedite delivery, nonrefundable deposits or loans in exchange for capacity commitments or commitments to purchase specified quantities over extended periods, such arrangements may be costly, reduce our financial flexibility and be on terms unfavorable to us, if we are able to secure such arrangements at all. To date, we have not entered into any such arrangements with our suppliers. If we need additional foundry or assembly and test subcontractors because of increased demand or the inability to obtain timely and adequate deliveries from our current vendors, we may not be able to do so cost-effectively, if at all.
A substantial portion of our revenue is processed through a single distributor and the loss of this distributor may cause disruptions in our shipments, which may adversely affect our operations and financial condition.
We sell a significant percentage of our solutions through a single distributor, WT, which serves as our non-exclusive sales representative and fulfillment partner in Asia other than Japan. Approximately 53%, 57% and 62% of our revenue was derived from sales through WT for the fiscal years ended January 31, 2024, 2023 and 2022, respectively, and approximately 62% of our revenue was derived from sales through WT for the three months ended April 30, 2024. We anticipate that a significant portion of our revenue will continue to be derived from sales through WT in the foreseeable future. Our current agreement with WT is effective until January 2026, unless it is terminated earlier by either party for any or no reason with 60 days written notice or by failure of the breaching party to cure a material breach within 30 days following written notice of such material breach by the non-breaching party. Our agreement with WT will automatically renew for additional successive 12-month terms unless at least 60 days before the end of the then-current term either party provides written notice to the other party that it elects not to renew the agreement. Termination of the relationship with WT, either by us or by WT, could result in a temporary or permanent loss of revenue. We may not be successful in finding suitable alternative distributors on satisfactory terms, or at all, and this could adversely affect our ability to effectively sell our solutions in certain geographical locations or to certain end customers. Furthermore, WT, or any successor or other distributors we do business with, may face issues obtaining credit, which could impair their ability to make timely payments to us.
We are subject to risks associated with our distributors' product inventories.
We sell many of our products to customers through distributors who maintain their own inventory of our products for sale to ODMs and end customers. We allow limited price adjustments on sales to distributors. Price adjustments may be effected by way of credits for future product or by cash payments to the distributor, either in arrears or in advance, using estimates based on historical transactions. In accordance with ASC 606, we recognize revenue on sales to distributors upon shipment and transfer of control (known as “sell-in” revenue recognition) based on the amount of consideration expected to be received. To the extent that the actual consideration received is materially different from estimated variable consideration recognized, we may be required to adjust revenue in subsequent periods.
45
If our distributors are unable to sell an adequate amount of their inventory of our products in a given quarter to ODMs and end customers, or if they decide to decrease their inventories for any reason, such as adverse global economic conditions or a downturn in technology spending, our sales to these distributors and our revenues may decline. We also face the risk that our distributors may purchase, or for other reasons accumulate, inventory levels of our products in any particular quarter in excess of future anticipated sales to end customers. If such sales do not occur in the time frame anticipated by these distributors for any reason, these distributors may substantially decrease the amount of product they order from us in subsequent periods until their inventory levels realign with end-customer demand, which would harm our business and could adversely affect our revenues in such subsequent periods. In recent periods, some end customers have indicated they are seeking to reduce their inventory levels, which may reduce such customers’ demand for our products, including products purchased through our distributors, in future periods and harm our financial results.
If our foundry vendors do not achieve satisfactory yields or quality, our reputation and customer relationships could be harmed.
The fabrication of our video and image processing SoC solutions is a complex and technically demanding process. Minor deviations in the manufacturing process can cause substantial decreases in yields, and in some cases, cause production to be suspended. Our foundry vendors, from time to time, experience manufacturing defects and reduced manufacturing yields, including in the fabrication of our SoCs. Changes in manufacturing processes or the inadvertent use of defective or contaminated materials by our foundry vendors could result in lower than anticipated manufacturing yields or unacceptable performance of our SoCs. Many of these problems are difficult to detect at an early stage of the manufacturing process and may be time consuming and expensive to correct. Poor yields from our foundry vendors, or defects, integration issues or other performance problems in our solutions, could cause us significant customer relations and business reputation problems, harm our financial results and give rise to financial or other damages to our customers. Our customers might consequently seek damages from us for their losses. A product liability claim brought against us, even if unsuccessful, would likely be time consuming and costly to defend.
Each of our SoC solutions is manufactured at a single location. If we experience manufacturing problems at a particular location, we would be required to transfer manufacturing to a new location or supplier. Converting or transferring manufacturing from a primary location or supplier to a backup fabrication facility could be expensive and could take two or more quarters. During such a transition, we would be required to meet customer demand from our then-existing inventory, as well as any partially finished goods that could be modified to the required product specifications. We do not seek to maintain sufficient inventory to address a lengthy transition period because we believe it is uneconomical. As a result, we may not be able to meet customer needs during such a transition, which could delay shipments, cause production delays, result in a decline in our sales and damage our customer relationships.
We rely on third-party vendors to supply software development tools to us for the development of our new products, and we may be unable to obtain the tools necessary to develop or enhance new or existing products.
We rely on third-party software development tools to assist us in the design, simulation and verification of new products or product enhancements. To bring new products or product enhancements to market in a timely manner, or at all, we need software development tools that are sophisticated enough or technologically advanced enough to complete our design, simulations and verifications. In the future, the design requirements necessary to meet consumer demands for more features and greater functionality from our solutions may exceed the capabilities of available software development tools. Unavailability of software development tools may result in our missing design cycles or losing design wins, either of which could result in a loss of market share or negatively impact our operating results.
Because of the importance of software development tools to the development and enhancement of our solutions, our relationships with leaders in the computer-aided design industry, including Cadence Design Systems, Inc., Mentor Graphics Corporation and Synopsys, Inc., are critical to us. If these relationships are not successful, we may be unable to develop new products or product enhancements in a timely manner, which could result in a loss of market share, a decrease in revenue or negatively impact our operating results.
46
We rely on third parties to provide services and technology necessary for the operation of our business. Any failure of one or more of our vendors, suppliers or licensors to provide such services or technology could harm our business.
We rely on third-party vendors to provide critical services, including, among other things, services related to accounting, human resources, information technology and network monitoring that we cannot or do not create or provide ourselves. We depend on these vendors to ensure that our corporate infrastructure will consistently meet our business requirements. The ability of these third-party vendors to successfully provide reliable and high-quality services is subject to technical and operational uncertainties that are beyond our control. While we may be entitled to damages if our vendors fail to perform under their agreements with us, our agreements with these vendors limit the amount of damages we may receive. In addition, we do not know whether we will be able to collect on any award of damages or that these damages would be sufficient to cover the actual costs we would incur as a result of any vendor’s failure to perform under its agreement with us. Upon expiration or termination of any of our agreements with third-party vendors, we may not be able to replace the services provided to us in a timely manner or on terms and conditions, including service levels and cost, that are favorable to us, and a transition from one vendor to another vendor could subject us to operational delays and inefficiencies until the transition is complete.
Any disruption to the operations of our third-party contractors and their suppliers could cause significant delays in the production or shipment of our products.
Our operations could be harmed if manufacturing, logistics or other operations of our third-party contractors or their suppliers are disrupted for any reason, including natural disasters, high heat events or water shortages, severe storms, other negative impacts from climate change, information technology system failures, military actions or environmental, public health or regulatory issues. The majority of our products are manufactured by or receive components from third-party contractors located in South Korea, Taiwan and Japan. The risk of an earthquake or tsunami in South Korea, Taiwan, Japan and elsewhere in the Pacific Rim region is significant due to the proximity of major earthquake fault lines. A disruption in the availability of image sensors from Sony Corporation as a result of the 2016 Kumamoto, Japan earthquake impacted our customers’ ability to build or launch cameras and, as a result, negatively impacted the timing and scope of demand for our SoCs in fiscal year 2017. Similarly, a severe cold storm in Texas in February 2021 disrupted the manufacturing of some of our products at Samsung’s Texas facility for several weeks. Any disruption resulting from such events could cause significant delays in the production or shipment of our products until we are able to shift our manufacturing, assembling or testing from the affected contractor to another third-party vendor. We may not be able to obtain alternate capacity on favorable terms, or at all.
Risks Related to Our Legal and Regulatory Environment
Global economic and political conditions, including high inflation, recessionary concerns and trade restrictions, may have an impact on our business and financial condition in ways that we currently cannot predict.
Our operations and performance depend significantly on global, regional and U.S. economic and geopolitical conditions. Customer demand for our solutions may be negatively impacted by weak economic conditions, high inflation or recessionary environments in the US and other nations. Inflation or other deteriorations in global economic conditions may impact our operating expenses and third parties may demand pricing accommodations, which could harm our ability to meet customer demands or collect revenue or otherwise harm our business and financial results.
General trade tensions between the United States and China have been escalating, which has, in our view, created and will perpetuate an uncertain business environment. Tariffs on Chinese-origin products have continued to increase. Additionally, in 2022, the U.S. government announced new controls restricting the ability to send certain products and technology related to semiconductors, semiconductor manufacturing, advanced computing, supercomputing, and artificial intelligence to China, including Hong Kong, without an export license. In many cases, these licenses are subject to a policy of denial and will not be issued. These controls have continued to expand. While our current products are not restricted by these controls, such controls could impact our ability to export products to China in the future. It also is possible that the Chinese government will retaliate in ways that could impact our business.
47
If additional tariffs or trade restrictions are imposed on our SoC solutions or the products of our customers, or trade restrictions are imposed on our ability to conduct business with certain customers, there could be a negative impact on our operations and financial performance. Even in the absence of new restrictions, tariffs or changes in export classifications, it is possible that foreign customers could take actions to reduce dependence on the supply of components, including our solutions, that could be subject to new export classifications or trade restrictions. There are also risks that the Chinese government may, among other things, require the use of local suppliers, compel companies that do business in China to partner with local companies to conduct business and provide incentives to government-backed local customers to buy from local suppliers. A large portion of our employee base is in China and impacts to our China offices could significantly harm our operations, make it difficult to support customers and negatively impact product development. The materialization of these risks could have a material adverse effect on our business and financial condition. Further, our business and performance are subject to economic conditions, and our suppliers, distributors, and customers may suffer their own financial and economic challenges.
Russia’s ongoing conflict with Ukraine has triggered significant sanctions from U.S. and European leaders. Changes in U.S. trade policy could trigger retaliatory actions by Russia, its allies and other affected countries, including China, resulting in a trade war. For example, in addition to controls imposed on China discussed above, following Russia’s invasion of Ukraine, the United States and other countries imposed certain economic sanctions and severe export control restrictions against Russia and Belarus, as well as certain Russian nationals, which caused us to terminate certain business relationships in those countries. These sanctions and restrictions have continued to increase as the conflict has further escalated, and the United States and other countries could impose wider sanctions and export restrictions and take other actions in the future that could impact our business. Furthermore, if the conflict between Russia and Ukraine continues for a long period of time, or if other countries, including the U.S., become further involved in the conflict, we could face significant adverse effects to our business and financial condition. In addition, some of our customers and third-party partners have engineering teams located in Russian and/or Ukraine, whose operations have been and may continue to be disrupted by the ongoing conflict between the countries. If such disruption were to continue for an extended period, our customers could face delays in the launch of new products containing our solutions, resulting in delayed or decreased demand for our solutions.
We have significant business operations in Taiwan, including 343 employees as of April 30, 2024, and many of our third-party manufacturing suppliers are located in Taiwan. Accordingly, our business, financial condition and results of operations may be affected by changes in governmental and economic policies in Taiwan, social instability and diplomatic and social developments in or affecting Taiwan due to its international political status. Although significant economic and cultural relations have been established between Taiwan and China, we cannot assure that relations between Taiwan and China will not face political or economic uncertainties in the future. Any deterioration in the relations between Taiwan and China, and other factors affecting military, political or economic conditions in Taiwan, could disrupt our business operations and materially and adversely affect our results of operations.
Our ability to sell our products to several China customers has been restricted.
Several of our customers, including Hangzhou Hikvision Digital Technology Co., Ltd, or Hikvision, Zhejiang Dahua Technology Co., Ltd., or Dahua, and affiliates of Shenzhen Dajiang Baiwang Technology Co., Ltd., have been added to the BIS Entity List, which imposes limitations on the supply of U.S. controlled items to the listed entities. In October 2022, BIS imposed additional restrictions on transactions with Dahua involving items subject to BIS export regulations. Notwithstanding our ability to continue to supply some SoC products to some affiliates of the listed entities, these customers may seek to obtain similar or substitute products from our competitors that are not subject to these limitations, or to develop similar or substitute products themselves. We also cannot be certain what additional actions the U.S. government may take with respect to any of our China customers, including changes to the Entity List restrictions, export regulations, tariffs or other trade restrictions, or whether the Chinese government may take any actions in response to U.S. government action that may adversely affect our ability to do business with our China customers. Even in the absence of new restrictions, tariffs or trade actions imposed by the U.S. or Chinese government, our China customers may take actions to reduce dependence on the supply of components subject to U.S. trade regulations, including our SoC solutions, which could have a material adverse effect on our operating results. We are unable to predict the duration of the restrictions imposed by the U.S. government or of any additional governmental actions, any of which could have a long-term adverse effect on our business, operating results and financial condition.
We are subject to governmental export and import controls that could subject us to liability or impair our ability to compete in international markets.
48
The U.S. and various foreign governments have imposed controls, export license requirements and restrictions on the import or export of certain products, technologies and software. We must export our products in compliance with U.S. export controls, including the Commerce’s Export Administration Regulations. We may not always be successful in obtaining necessary export licenses, and our failure to obtain required import or export approval for our products or limitations on our ability to export or sell our products imposed by these laws may harm both our international and domestic sales and adversely affect our revenue. Noncompliance with these laws could have negative consequences, including government investigations, penalties and reputational harm.
Changes in our products or changes in export, import and economic sanctions laws and regulations may delay our introduction of new products in international markets, prevent our customers from deploying our products internationally or, in some cases, prevent the export or import of our products to or from certain countries altogether. Any change in export or import regulations or legislation, shift or change in enforcement, or change in the countries, persons or technologies targeted by these regulations, could result in decreased use of our products by, or in our decreased ability to export or sell our products to, existing or potential customers with international operations. In such event, our business and results of operations could be adversely affected.
We are subject to warranty and product liability claims and to product recalls.
From time to time, we are subject to warranty claims that may require us to make significant expenditures to defend these claims or pay damage awards. In the future, we may also be subject to product liability claims resulting from failure of our solutions or if products we design, manufacture, or sell, cause personal injury or property damage, even where the cause is unrelated to product defects. These risks will likely increase as our products are introduced into new devices, markets, or applications, including autonomous and semi-autonomous automotive, drone and robotic applications. In the event of a warranty claim, we may also incur costs if we compensate the affected customer. We maintain product liability insurance, but this insurance is limited in amount and subject to significant deductibles. There is no guarantee that our insurance will be available or adequate to protect against all claims. We also may incur costs and expenses relating to a recall of one of our customers’ products containing one of our devices. The process of identifying a recalled product in consumer devices that have been widely distributed may be lengthy and require significant resources, and we may incur significant replacement costs, contract damage claims from our customers and reputational harm. Costs or payments made in connection with warranty and product liability claims and product recalls could harm our financial condition and results of operations, as well as harm our reputation and cause the market value of our ordinary shares to decline.
We are subject to governmental laws, regulations and other legal obligations related to privacy, data protection and cybersecurity.
The legislative and regulatory framework for privacy, data protection and cybersecurity issues worldwide is rapidly evolving and is likely to remain uncertain for the foreseeable future. We collect and otherwise process personal information and other data as part of our business processes and activities. This data is subject to a variety of U.S. and international laws and regulations, including oversight by various regulatory or other governmental bodies. Many foreign countries and governmental bodies, including China, the European Union and other relevant jurisdictions where we conduct business, have laws and regulations concerning the collection, use and other processing of personal information and other data obtained from their residents or by businesses operating within their jurisdictions that are more restrictive than those in the U.S. For example, the European Union has adopted the General Data Protection Regulation, or GDPR, which imposed stringent data protection requirements and provided for substantial penalties for noncompliance, including the potential for fines of up to €20 million or 4% of the annual global revenues of the noncompliant entity, whichever is greater. The United Kingdom has adopted legislation that substantially implements the GDPR and provides for a similar penalty structure. Similarly, California has adopted the California Consumer Privacy Act of 2018, or CCPA, which took effect in 2020. California has adopted a new law, the California Privacy Rights Act of 2020, or CPRA, that substantially expanded the CCPA as of January 1, 2023. The CCPA, as amended and modified by the CPRA, gives California residents the right to access, delete and opt out of certain sharing of their information, and imposes penalties for failure to comply. Numerous other U.S. states have proposed, and in certain cases enacted, similar general privacy legislation.
In 2021, the National People’s Congress passed the Data Security Law of the People’s Republic of China (Data Security Law) and China’s Personal Information Protection Law (PIPL). The Data Security Law is the first comprehensive data security legislation in China and aims to regulate a wide range of issues in relation to the collection, storage, processing, use, provision, transaction and publication of any kind of data. The PIPL is the first national-level law comprehensively regulating issues in relation to personal information protection in China. Significant uncertainty remains regarding how regulators will interpret and enforce these laws, but the Data Security Law contains provisions that allow substantial government oversight and include fines for failure to obtain required approval from China’s cyber and data protection regulators for cross-border personal information-related data transfers. PIPL authorizes enforcement by cybersecurity authorities and other regulators, and provides for fines and other remedies for noncompliance.
49
Aspects of these laws remain unclear, resulting in further uncertainty and potentially requiring us to modify our data practices and policies and to incur substantial additional costs and expenses in an effort to comply. Because the interpretation and application of many laws and regulations relating to privacy, data protection, and data security, along with industry standards, are uncertain, it is possible that these laws and regulations may be interpreted and applied in a manner that is inconsistent with our data management practices or the features of our products or solutions, and we could face fines, lawsuits, regulatory investigations, and other claims and penalties, and we could be required to fundamentally change our products or our business practices, which could have an adverse effect on our business. Any inability, or perceived inability, to adequately address privacy and data protection concerns, or to comply with applicable laws, regulations, policies, industry standards, contractual obligations or other legal obligations, even if unfounded, could result in additional cost and liability to us, inhibit sales, damage our reputation and adversely affect our business.
Failure to comply with the U.S. Foreign Corrupt Practices Act, or FCPA, and similar laws associated with our activities outside of the United States could subject us to penalties and other adverse consequences.
We face significant risks if we fail to comply with the FCPA and other anti-corruption laws that prohibit improper payments or offers of payment to foreign governments and political parties by us for the purpose of obtaining or retaining business. In many foreign countries, particularly in countries with developing economies, it may be a local custom that businesses operating in such countries engage in business practices that are prohibited by the FCPA or other applicable laws and regulations. Although we implemented an FCPA compliance program, we cannot assure you that all of our employees and agents, as well as those companies to which we outsource certain of our business operations, will not take actions in violation of our policies and applicable law, for which we may be ultimately held responsible. Any violation of the FCPA or other applicable anti-corruption laws could result in severe criminal or civil sanctions and, in the case of the FCPA, suspension or debarment from U.S. government contracting, which could have a material and adverse effect on our reputation, business, financial condition, operating results and cash flows.
We, our customers and third-party contractors are subject to increasingly complex environmental regulations and compliance with these regulations may delay or interrupt our operations and adversely affect our business.
We face increasing complexity in our procurement, design, and research and development operations as a result of requirements relating to the materials composition of our products, including the European Union’s, or EU’s, Restriction on the Use of Certain Hazardous Substances in Electrical and Electronic Equipment, or RoHS, directive, which restricts the content of lead and certain other hazardous substances in specified electronic products put on the market in the EU and similar Chinese legislation relating to marking of electronic products which became effective in March 2007. Failure to comply with these and similar laws and regulations could subject us to fines, penalties, civil or criminal sanctions, contract damage claims, and take-back of non-compliant products, which could harm our business, reputation and operating results. The passage of similar requirements in additional jurisdictions or the tightening of these standards in jurisdictions where our products are already subject to such requirements could cause us to incur significant expenditures to make our products compliant with new requirements, or could limit the markets into which we may sell our products.
Our failure to comply with present and future environmental, health and safety laws could cause us to incur substantial costs, result in civil or criminal fines and penalties and decreased revenue, which could adversely affect our operating results. Failure by our foundry vendors or other suppliers to comply with applicable environmental laws and requirements could cause disruptions and delays in our product shipments, which could adversely affect our relations with our ODMs and OEMs and adversely affect our business and results of operations.
Regulations related to “conflict minerals” may force us to incur additional expenses, may make our supply chain more complex and may result in damage to our reputation with customers.
Pursuant to the Dodd-Frank Wall Street Reform and Consumer Protection Act of 2010, or the Dodd-Frank Act, the Securities and Exchange Commission, or the SEC, has adopted requirements for companies that use certain minerals and metals, known as conflict minerals, in their products, whether or not these products are manufactured by third parties. These requirements require companies to perform due diligence, disclose and report whether or not such minerals originate from the Democratic Republic of the Congo and adjoining countries. These requirements could adversely affect the sourcing, availability and pricing of minerals used in the manufacture of semiconductor devices, including our products. While these requirements continue to be subject to administrative uncertainty, we have incurred, and may continue to incur, costs to comply with the disclosure requirements, including costs related to determining the source of any of the relevant minerals and metals used in our products. Since our supply chain is complex, we may not be able to sufficiently verify the origins for these minerals and metals used in our products through the due diligence procedures that we implement, which may harm our reputation. In such event, we may also face difficulties in satisfying customers who require that all of the components of our products are certified as conflict mineral free.
50
We are subject to regulatory compliance requirements, including Section 404 of the Sarbanes-Oxley Act of 2002, which are costly to comply with, and our failure to comply with these requirements could harm our business and operating results.
We are subject to disclosure and compliance requirements associated with being a public company, including but not limited to compliance with Section 404 of the Sarbanes-Oxley Act of 2002. For example, Section 404 of the Sarbanes-Oxley Act requires that our management report on, and our independent auditors attest to, the effectiveness of our internal control structure and procedures for financial reporting. Compliance with Section 404 requires a significant amount of time, expenses and diversion of internal resources. If we or our auditors discover a material weakness in our internal controls, the disclosure of that fact, even if quickly remedied, could reduce the market’s confidence in our financial statements and harm our stock price. In addition, if we fail to maintain effective controls over financial reporting, we could be subject to sanctions or investigations by The Nasdaq Global Select Market, the SEC, or other regulatory authorities. Irrespective of compliance with Section 404, any failure of our internal controls could have a material adverse effect on our stated results of operations and harm our reputation. Furthermore, investor perceptions of our company may suffer, and this could cause a decline in the market price of our ordinary shares.
We have identified a material weakness in our internal control over financial reporting. Failure to achieve and maintain effective internal control over financial reporting in accordance with Section 404 of the Sarbanes-Oxley Act of 2002 could materially and adversely affect our business, results of operations, financial condition, and stock price.
We are subject to disclosure and compliance requirements associated with being a public company, including but not limited to compliance with Section 404 of the Sarbanes-Oxley Act of 2002. For example, Section 404 of the Sarbanes-Oxley Act requires that our management report on, and our independent auditors attest to, the effectiveness of our internal control structure and procedures for financial reporting. Compliance with Section 404 requires a significant amount of time, expenses and dedication of internal resources.
In connection with the preparation of our consolidated financial statements, a material weakness was identified in our internal control over financial reporting as of January 31, 2024. We did not design and maintain effective controls over the accounting for income taxes. Specifically, we did not have tax personnel with the appropriate skills and level of experience to assess complicated tax matters, and we did not properly identify, risk assess, design and maintain effective controls related to the income tax provision, including controls related to the evaluation of tax deductions and recognition and measurement of deferred tax assets. This material weakness resulted in immaterial errors to the provision for income taxes, deferred tax assets, income taxes payable, and income tax disclosures which were adjusted in our consolidated financial statements for the fiscal year ended January 31, 2024. Additionally, this material weakness could result in a misstatement of the aforementioned account balances or disclosures that would result in a material misstatement in our annual or interim consolidated financial statements that would not be prevented or detected.
The material weakness did not result in a material misstatement to the fiscal year 2024 consolidated financial statements. As a result of this material weakness, our management concluded that our internal control over financial reporting was not effective based on the framework in Internal Control-Integrated Framework (2013), issued by the Committee of Sponsoring Organizations of the Treadway Commission. We are actively engaged in implementing a remediation plan designed to address this material weakness. If our remedial measures are insufficient to address the material weakness, or if additional material weaknesses or significant deficiencies in our internal control are discovered or occur in the future, our consolidated financial statements may contain material misstatements and we could be required to restate our financial results.
Even if this material weakness is quickly remedied, or if we or our auditors discover an additional material weakness in our internal controls, the market’s confidence in our financial statements could decline and our stock price may be harmed. In addition, our failure to maintain effective controls over financial reporting could subject us to sanctions or investigations by The Nasdaq Global Select Market, the SEC, or other regulatory authorities. Irrespective of compliance with Section 404, this and any other failure of our internal controls could have a material adverse effect on our stated results of operations and harm our reputation. Furthermore, investor perceptions of our company may suffer, and this could cause a decline in the market price of our ordinary shares.
Changes in effective tax rates or adverse outcomes resulting from examination of our income tax returns could adversely affect our results.
51
Our future effective tax rates could be adversely affected if our earnings are lower than anticipated in countries where we have lower statutory rates and higher than anticipated in countries where we have higher statutory rates, by changes in the valuation of our deferred tax assets and liabilities, transfer pricing adjustments, re-organization or restructuring of our businesses, changes in our corporate structure, including the effect of acquisitions on our legal structure, by tax costs related to intercompany realignments, tax effects of share-based compensation, expiration of or lapses in tax incentives, or by changes in tax laws, regulations, accounting principles or interpretations thereof. For example, changes in tax laws, including the U.S. federal tax legislation commonly referred to as the Tax Cuts and Jobs Act of 2017, or Tax Act, as well as other factors, could cause us to experience fluctuations in our tax obligations and effective tax rates and otherwise adversely affect our tax positions and/or our tax liabilities. The Tax Act requires complex computations not previously provided in U.S. tax law. The U.S. Department of Treasury has broad authority to issue regulations and interpretative guidance that may significantly impact how we will apply the law and impact our results of operations in the period issued. In August 2022, the U.S. enacted the Inflation Reduction Act of 2022, or IRA, which includes a new 15% corporate minimum tax as well as a 1% excise tax on the fair value of corporate stock repurchases made by U.S. corporations and certain foreign corporations after December 31, 2022. We do not expect the IRA to have a material impact on our financial statements.
In addition, our income tax returns are subject to continuous examination by the Internal Revenue Service, or IRS, and other tax authorities. We regularly assess the likelihood of adverse outcomes resulting from these examinations to determine the adequacy of our provision for income taxes. We cannot assure you that the outcomes from these continuous examinations will not have an adverse effect on our operating results and financial condition.
Unfavorable tax law changes, an unfavorable governmental review of our tax returns, changes in our geographical earnings mix or imposition of withholding taxes on repatriated earnings could adversely affect our effective tax rate and our operating results.
Our operations are subject to certain taxes, such as income and transaction taxes, in the Cayman Islands, the United States, China, Hong Kong, Japan, Italy, Germany, South Korea, Taiwan and other jurisdictions in which we do business. A change in the tax laws in the jurisdictions in which we do business, including an increase in tax rates or an adverse change in the treatment of an item of income or expense, possibly with retroactive effect, could result in a material increase in the amount of taxes we incur. In particular, past proposals have been made to change certain U.S. tax laws relating to foreign entities with U.S. connections, which may include us. For example, previously proposed legislation has considered treating certain foreign corporations as U.S. domestic corporations (and therefore taxable on all of their worldwide income) if the management and control of the foreign corporation occurs, directly or indirectly, primarily within the United States. If such legislation were enacted, we could, depending on the precise form, be subject to U.S. taxation notwithstanding our domicile outside the United States. In addition, over the last several years, the Organization for Economic Co-operation and Development (OECD) has been working on a Base Erosion and Profit Shifting Project and has been issuing guidelines and proposals covering a number of issues, including country-by-country reporting, permanent establishment rules, transfer pricing rules and tax treaties. Many of these changes have been or are in the process of being adopted by numerous countries and could materially and adversely affect our provision for income taxes. In 2021, more than 140 countries tentatively signed on to a framework that imposes a global minimum tax of 15%. The Council of the European Union has adopted this initiative, which has been implemented into the domestic laws of some jurisdictions for fiscal years starting on or after December 31, 2023 for multinationals that meet the annual threshold of at least EUR 750 million of consolidated revenues. Additional changes to global tax laws are likely to occur, and such changes may adversely affect our effective tax rate, operating results, and cash flow.
In December 2018, the Cayman Islands passed the International Tax Co-Operation (Economic Substance) Law, 2018, which requires Cayman Islands companies carrying on one or more relevant activities to maintain a substantial economic presence in the Cayman Islands. Effective from December 31, 2019, we have structured our activities to comply with the new law. However, the legislation remains subject to further clarification and interpretation and accordingly, there is no guarantee that we will be deemed to be compliant. Furthermore, this legislation may require us to make additional changes to the activities we carry on in the Cayman Islands, which could increase our cost of operations, and we could be subject to penalties for lack of compliance. As a result, we are not able to determine the impact on our operations and net income as of the current period.
We are subject to periodic audits or other reviews by tax authorities in the jurisdictions in which we conduct our activities. Any such audit, examination or review requires management’s time, diverts internal resources and, in the event of an unfavorable outcome, may result in additional tax liabilities or other adjustments to our historical results.
52
Because we conduct operations in multiple jurisdictions, our effective tax rate is influenced by the amounts of income and expense attributed to each such jurisdiction. If such amounts were to change so as to increase the amounts of our net income subject to taxation in higher-tax jurisdictions, or if we were to commence operations in jurisdictions assessing relatively higher tax rates, our effective tax rate could be adversely affected. In addition, we may determine that it is advisable from time to time to repatriate earnings from subsidiaries under circumstances that could give rise to imposition of potentially significant withholding taxes by the jurisdictions in which such amounts were earned, without our receiving the benefit of any offsetting tax credits, which could also adversely impact our effective tax rate.
We may be classified as a passive foreign investment company which could result in adverse U.S. federal income tax consequences for U.S. holders of our ordinary shares.
Based on the current and anticipated valuation of our assets and the composition of our income and assets, we do not expect to be considered a passive foreign investment company, or PFIC, for U.S. federal income tax purposes for our 2025 fiscal year or the foreseeable future. However, a separate determination must be made at the close of each taxable year as to whether we are a PFIC for that taxable year, and we cannot assure you that we will not be a PFIC for our 2026 fiscal year or any future taxable year. Under current law, a non-U.S. corporation will be considered a PFIC for any taxable year if either (a) at least 75% of its gross income is passive income or (b) at least 50% of the value of its assets, generally based on an average of the quarterly values of the assets during a taxable year, is attributable to assets that produce or are held for the production of passive income. PFIC status depends on the composition of our assets and income and the value of our assets (which may be based in part on the value of our ordinary shares, which may fluctuate), including, among others, a pro rata portion of the income and assets of each subsidiary in which we own, directly or indirectly, at least 25% by value of the subsidiary’s equity interests, from time to time. Because we currently hold, and expect to continue to hold, a substantial amount of cash or cash equivalents, and because the calculation of the value of our assets may be based in part on the value of our ordinary shares, which may fluctuate and may fluctuate considerably given that market prices of technology companies historically often have been volatile, we may be a PFIC for any taxable year. If we were treated as a PFIC for any taxable year during which a U.S. holder held ordinary shares, certain adverse U.S. federal income tax consequences could apply for such U.S. holder.
Changes in our United States federal income tax classification, or that of our subsidiaries, could result in adverse tax consequences to our 10% or greater U.S. shareholders.
The Tax Act may have changed the consequences to U.S. shareholders that own, or are considered to own, as a result of certain attribution rules, 10% or more of the voting power or value of the stock of a non-U.S. corporation (a 10% U.S. shareholder) under the U.S. federal income tax law applicable to owners of U.S. controlled foreign corporations, or CFCs.
Prior to the Tax Act, we did not believe that we, or any of our non-U.S. subsidiaries, were considered a CFC, which is a determination made daily based on whether the 10% U.S. shareholders together own, or are considered to own under the attribution rules, more than 50% of the voting power or value of a non-U.S. corporation. Under the Tax Act, however, because our group includes one or more U.S. subsidiaries, certain of our non-U.S. subsidiaries may be classified as CFCs with respect to any single 10% U.S. shareholder, even without regard to whether 10% U.S. shareholders together own, directly or indirectly, more than 50% of the voting power or value of the Company. Our 10% or greater U.S. shareholders should consult their individual tax advisors for advice regarding the Tax Act’s revision to the U.S. federal income tax law applicable to owners of CFCs.
53
Risks Related to Our Intellectual Property
Our failure to adequately protect our intellectual property rights could impair our ability to compete effectively or defend ourselves from litigation, which could harm our business, financial condition and results of operations.
Our success depends, in part, on our ability to protect our intellectual property. We rely primarily on patent, copyright, trademark and trade secret laws, as well as confidentiality and non-disclosure agreements and other contractual protections, to protect our proprietary technologies and know-how, all of which offer only limited protection. The steps we have taken to protect our intellectual property rights may not be adequate to prevent misappropriation of our proprietary information or infringement of our intellectual property rights, and our ability to prevent such misappropriation or infringement is uncertain, particularly in countries outside of the United States. The failure of our patents to adequately protect our technology might make it easier for our competitors to offer similar products or technologies, which would harm our business. For example, our patents and patent applications could be opposed, contested, circumvented, designed around by our competitors or be declared invalid or unenforceable in judicial or administrative proceedings. Our foreign patent protection is generally not as comprehensive as our U.S. patent protection and may not protect our intellectual property in some countries where our products are sold or may be sold in the future. Many U.S.-based companies have encountered substantial intellectual property infringement in foreign countries, including countries where we sell products. Even if foreign patents are granted, effective enforcement in foreign countries may not be available. For example, the legal environment relating to intellectual property protection in certain emerging market countries where we operate is relatively weaker, often making it difficult to create and enforce such rights. We may not be able to effectively protect our intellectual property rights in these emerging markets or elsewhere. If such an impermissible use of our intellectual property or trade secrets were to occur, our ability to sell our solutions at competitive prices may be adversely affected and our business, financial condition, operating results and cash flows could be materially and adversely affected.
We may in the future need to initiate infringement claims or litigation in order to try to protect our intellectual property rights. Litigation, whether we are a plaintiff or a defendant, can be expensive, time-consuming and may divert the efforts of our technical staff and management, which could harm our business, whether or not such litigation results in a determination favorable to us. Litigation also puts our patents at risk of being invalidated or interpreted narrowly and our patent applications at risk of not being issued. Additionally, any enforcement of our patents or other intellectual property may provoke third parties to assert counterclaims against us. If we are unable to protect our proprietary rights or if third parties independently develop or gain access to our or similar technologies, our business, revenue, reputation and competitive position could be harmed.
Third parties’ assertions of infringement of their intellectual property rights could result in our having to incur significant costs and cause our operating results to suffer.
The semiconductor industry is characterized by vigorous protection and pursuit of intellectual property rights and positions, which has resulted in protracted and expensive litigation for many companies. We and certain of our customers have received, and in the future may receive, communications from others alleging our infringement of their patents, trade secrets or other intellectual property rights. In addition, we and certain of our end customers have been the subject of lawsuits alleging infringement of intellectual property rights by our solutions or products incorporating our solutions, including the assertion that the alleged infringement may be attributable, at least in part, to our technology. Such lawsuits could subject us to significant liability for damages and invalidate our proprietary rights, though this has not occurred to date. Any potential intellectual property litigation also could force us to do one or more of the following:
Any significant impairment of our intellectual property rights from any litigation we face could harm our business and our ability to compete.
54
Any potential dispute involving our patents or other intellectual property could affect our customers, which could trigger our indemnification obligations to them and result in substantial expense to us.
In any potential dispute involving our patents or other intellectual property, our customers could also become the target of litigation. Certain of our customers have received notices from third parties claiming to have patent rights in certain technology and inviting our customers to license this technology, and certain of our end customers have been the subject of lawsuits alleging infringement of patents by products incorporating our solutions, including the assertion that the alleged infringement may be attributable, at least in part, to our technology. Because we generally indemnify our customers for intellectual property claims made against them for products incorporating our technology, any litigation could trigger technical support and indemnification obligations under some of our license agreements, which could result in substantial expense to us. Because some of our ODMs and OEMs are larger than we are and have greater resources than we do, they may be more likely to be the target of an infringement claim by third parties than we would be, which could increase our chances of becoming involved in a future lawsuit. If any such claims were to succeed, we might be forced to pay damages on behalf of our ODMs or OEMs that could increase our expenses, disrupt our ability to sell our solutions and reduce our revenue. In addition to the time and expense required for us to supply support or indemnification to our customers, any such litigation could severely disrupt or shut down the business of our customers, which in turn could hurt our relations with our customers and cause the sale of our products to decrease.
The use of open source software in our products, processes and technology may expose us to additional risks and compromise our proprietary intellectual property.
Our products, processes and technology sometimes utilize and incorporate software that is subject to an open source license. Open source software is typically freely accessible, usable and modifiable. Certain open source software licenses, such as the GNU General Public License, require a user who intends to distribute the open source software as a component of the user’s software to disclose publicly part or all of the source code to the user’s software. In addition, certain open source software licenses require the user of such software to make any derivative works of the open source code available to others on terms unfavorable to us or at no cost. This can subject previously proprietary software to open source license terms.
While we monitor the use of open source software in our products, processes and technology and try to ensure that no open source software is used in such a way as to require us to disclose the source code to the related product, processes or technology when we do not wish to do so, such use could inadvertently occur. Additionally, if a third-party software provider has incorporated certain types of open source software into software we license from such third-party for our products, processes or technology, we could, under certain circumstances, be required to disclose the source code to our products, processes or technology. This could harm our intellectual property position and our business, results of operations and financial condition.
Risks Related to Ownership of Our Ordinary Shares
The market price of our ordinary shares may be volatile, which could cause the value of your investment to decline.
The market price of our ordinary shares has historically been highly volatile, and has been particularly volatile in recent years. For example, since February 1, 2020, the trading price of our common stock ranged from a low of $36.02 to a high of $227.59 and was $45.97 at the close of trading on April 30, 2024. The trading price of our ordinary shares is likely to remain volatile and could be subject to wide fluctuations in price in response to various factors, some of which are beyond our control. These factors include:
55
In addition, the stock market in general, and the market for semiconductor and other technology companies in particular, have experienced extreme price and volume fluctuations that have often been unrelated or disproportionate to the operating performance of those companies. These broad market and industry factors may cause the market price of our ordinary shares to decrease, regardless of our actual operating performance. These trading price fluctuations may also make it more difficult for us to use our ordinary shares as a means to make acquisitions or to use options to purchase our ordinary shares to attract and retain employees. If the market price of our ordinary shares declines, you may not realize any return on your investment in us and may lose some or all of your investment. In addition, in the past, following periods of volatility in the overall market and the market price of a company’s securities, securities class action litigation has often been instituted against these companies. This litigation, if instituted against us, could result in substantial costs and a diversion of our management’s attention and resources.
Our actual operating results may not meet or exceed our guidance and investor expectations, which would likely cause our stock price to decline.
From time to time, we may release guidance in our earnings releases, earnings conference calls or otherwise, regarding our future performance that represent our management’s estimates as of the date of release. If given, this guidance, which will include forward-looking statements, will be based on projections prepared by our management. Projections are based upon a number of assumptions and estimates that, while presented with numerical specificity, are inherently subject to significant business, economic and competitive uncertainties and contingencies, many of which are beyond our control. The principal reason that we expect to release guidance is to provide a basis for our management to discuss our business outlook with analysts and investors. With or without our guidance, analysts and other investors may publish expectations regarding our business, financial performance and results of operations. We do not accept any responsibility for any projections or reports published by any such third persons.
Guidance is necessarily speculative in nature, and it can be expected that some or all of the assumptions of the guidance furnished by us will not materialize or will vary significantly from actual results. If our actual performance does not meet or exceed our guidance or investor expectations, the trading price of our ordinary shares is likely to decline. Similarly, if our guidance does not meet or exceed expectations of investors or securities analysts, the trading price of our ordinary shares is likely to decline.
The price of our ordinary shares could decrease as a result of dilution of existing shareholders from new shares being sold in the market.
Sales of a substantial number of our ordinary shares in the public market, or the perception that these sales might occur, could cause the market price of our ordinary shares to decline. In the past, we have issued stock options to employees and we regularly issue restricted stock units (RSUs) to employees, which settle as ordinary shares upon vesting. These shares can be freely sold in the public market upon issuance and vesting, subject to restrictions provided under the terms of the applicable plan and/or the option agreements entered into with option holders. We may also issue ordinary shares or securities convertible into ordinary shares from time to time in connection with a financing, acquisition or otherwise. Any such issuance could result in substantial dilution to our existing shareholders and cause the trading price of our stock to decline.
We do not intend to pay dividends on our ordinary shares and, consequently, a shareholder’s ability to achieve a return on its investment will depend on appreciation in the price of our ordinary shares.
We have never declared or paid any cash dividends on our ordinary shares and do not currently intend to do so for the foreseeable future. We currently intend to invest our future earnings, if any, to fund our growth. Therefore, shareholders are not likely to receive any dividends on their ordinary shares for the foreseeable future and the success of an investment in our ordinary shares will depend upon any future appreciation in their value. There is no guarantee that our ordinary shares will appreciate in value or even maintain the price at which our shareholders have purchased their shares. Investors seeking cash dividends should not purchase our ordinary shares.
56
Provisions of our memorandum and articles of association and Cayman Islands corporate law may discourage or prevent an acquisition of us which could adversely affect the value of our ordinary shares.
Provisions of our memorandum and articles of association and Cayman Islands law may have the effect of delaying or preventing a change of control or changes in our management. These provisions include the following:
Holders of our ordinary shares may face difficulties in protecting their interests because we are incorporated under Cayman Islands law.
Our corporate affairs are governed by our amended and restated memorandum and articles of association, by the Companies Law (as the same may be supplemented or amended from time to time) of the Cayman Islands and by the common law of the Cayman Islands. The rights of our shareholders and the fiduciary responsibilities of our directors under Cayman Islands law are not as clearly established as under statutes or judicial precedent in existence in jurisdictions in the United States. In particular, the Cayman Islands has a less developed body of securities laws than the United States and provides significantly less protection to investors. There is no legislation specifically dedicated to the rights of investors in securities and thus no statutorily defined private cause of action specific to investors such as those provided under the Securities Act or the Securities Exchange Act of 1934, as amended. In addition, shareholders of Cayman Islands companies may not have standing to initiate shareholder derivative actions in U.S. federal courts. Therefore, you may have more difficulty in protecting your interests in the face of actions by our management, directors or controlling shareholders than would shareholders of a corporation incorporated in a jurisdiction in the United States due to the comparatively less developed nature of Cayman Islands law in this area.
Shareholders of Cayman Islands exempted companies, such as our company, have no general rights under Cayman Islands law to inspect corporate records and accounts or to obtain copies of lists of shareholders of the company. Our directors have discretion under our articles of association to determine whether or not, and under what conditions, our corporate records may be inspected by our shareholders, but are not obliged to make them available to our shareholders. This may make it more difficult for you to obtain the information needed to establish any facts necessary for a shareholder motion or to solicit proxies from other shareholders in connection with a proxy contest.
Subject to limited exceptions, under Cayman Islands law, a minority shareholder may not bring a derivative action against the board of directors.
57
Holders of our ordinary shares may have difficulty obtaining or enforcing a judgment against us because we are incorporated under the laws of the Cayman Islands.
It may be difficult or impossible for you to bring an action against us in the Cayman Islands if you believe your rights have been infringed under U.S. securities laws. There is no statutory recognition in the Cayman Islands of judgments obtained in the United States, although the courts of the Cayman Islands will in certain circumstances recognize and enforce a non-penal judgment of a foreign court of competent jurisdiction without retrial on the merits. While there is no binding authority on this point, this is likely to include, in certain circumstances, a non-penal judgment of a United States court imposing a monetary award based on the civil liability provisions of the U.S. federal securities laws. The Grand Court of the Cayman Islands may stay proceedings if concurrent proceedings are being brought elsewhere. There is uncertainty as to whether the Grand Court of the Cayman Islands would recognize or enforce judgments of United States courts obtained against us predicated upon the civil liability provisions of the securities laws of the United States or any state thereof and whether the Grand Court of the Cayman Islands would hear original actions brought in the Cayman Islands against us predicated upon the securities laws of the United States or any state thereof.
General Risk Factors
If our operations are interrupted, our business and reputation could suffer.
Our operations and those of our manufacturers are vulnerable to interruption caused by technical breakdowns, computer hardware and software malfunctions, software viruses, infrastructure failures, pandemics, and regional health issues, earthquakes, fires, severe storms, floods and other negative impacts from climate change, power losses, telecommunications failures, terrorist attacks, wars, Internet failures and other events beyond our control. Our operations could also be disrupted by geopolitical conditions, particularly in Taiwan or China, where the majority of our employees are located. Any disruption in our services or operations could result in a reduction in revenue, delay product development and R&D, or result in a claim for substantial damages against us, regardless of whether we are responsible for that failure. If remote or work from home conditions were to continue for an extended period of time, we may experience delays in product development, a decreased ability to support our customers, reduced design win activity, and overall lack of productivity. We rely on our computer equipment, database storage facilities and other office equipment, which are located primarily in the seismically active San Francisco Bay Area and Taiwan. If we suffer a significant database or network facility outage, our business could experience disruption until we fully implement our back-up systems.
If securities analysts or industry analysts downgrade our ordinary shares, publish negative research or reports or fail to publish reports about our business, our stock price and trading volume could decline.
The trading market for our ordinary shares will be influenced by the research and reports that industry or securities analysts publish about us, our business and our market. If one or more analysts adversely changes their recommendation regarding our stock or our competitors’ stock, our stock price would likely decline. If one or more analysts cease coverage of us or fail to regularly publish reports on us, we could lose visibility in the financial markets which in turn could cause our stock price or trading volume to decline.
ITEM 5. Other Information
Securities Trading Plans of Directors and Executive Officers
During our fiscal quarter ending April 30, 2024, no director or officer, as defined in Rule 16a-1(f),
ITEM 6. Exhibits
The exhibits listed in the accompanying Exhibit Index are filed or incorporated by reference as part of this Quarterly Report.
58
EXHIBIT INDEX
Exhibit Number |
Description |
|
|
|
|
3.1(1) |
|
|
|
|
|
10.1(2)* |
|
|
|
|
|
31.1 |
|
|
|
|
|
31.2 |
|
|
|
|
|
32.1± |
|
|
|
|
|
101.INS |
|
Inline XBRL Instance Document – the instance document does not appear in the Interactive Data file because its XBRL tags are embedded within the Inline XBRL document |
|
|
|
101.SCH |
|
Inline XBRL Taxonomy Schema Linkbase Document |
|
|
|
101.CAL |
|
Inline XBRL Taxonomy Calculation Linkbase Document |
|
|
|
101.DEF |
|
Inline XBRL Taxonomy Definition Linkbase Document |
|
|
|
101.LAB |
|
Inline XBRL Taxonomy Labels Linkbase Document |
|
|
|
101.PRE |
|
Inline XBRL Taxonomy Presentation Linkbase Document |
|
|
|
104 |
|
The cover page from the Company’s Quarterly Report on Form 10-Q for the quarter ended April 30, 2024, has been formatted in Inline XBRL and included in Exhibit 101. |
(1) |
|
Incorporated by reference to the Registrant’s registration statement on Form S-1 (No. 333-174838) Amendment No. 3 as filed with the Securities and Exchange Commission on September 12, 2012. |
(2) |
|
Incorporated by reference to the Form 8-K filed on February 28, 2024. |
* |
|
Management contracts or compensation plans or arrangements in which directors or executive officers are eligible to participate. |
± |
|
In accordance with Item 601(b)(32)(ii) of Regulation S-K and SEC Release No. 33-8238 and 34-47986, Final Rule: Management’s Reports on Internal Control Over Financial Reporting and Certification of Disclosure in Exchange Act Periodic Reports, the certifications furnished in Exhibits 32.1 hereto are deemed to accompany this Form 10-Q and will not be deemed “filed” for purposes of Section 18 of the Exchange Act. Such certifications will not be deemed to be incorporated by reference into any filings under the Securities Act or the Exchange Act, except to the extent that the registrant specifically incorporates it by reference. |
59
Signatures
Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned thereunto duly authorized.
|
|
|
|
|
|
|
|
|
|
|
AMBARELLA, INC. |
||
|
|
|
|
|||
Date: June 6, 2024 |
|
|
|
By: |
|
/s/ Feng-Ming Wang |
|
|
|
|
|
|
Feng-Ming Wang |
|
|
|
|
|
|
President and Chief Executive Officer |
|
|
|
|
|||
Date: June 6, 2024 |
|
|
|
By: |
|
/s/ John A. Young |
|
|
|
|
|
|
John A. Young |
|
|
|
|
|
|
Chief Financial Officer |
60
Exhibit 31.1
CERTIFICATION OF PRINCIPAL EXECUTIVE OFFICER
Certification of Principal Executive Officer Required Under Rule 13a-14(a) and 15d-14(a) of the
Securities Exchange Act of 1934, as amended.
I, Feng-Ming Wang, certify that:
1. I have reviewed this Quarterly Report on Form 10-Q of Ambarella, Inc.;
2. Based on my knowledge, this report does not contain any untrue statement of a material fact or omit to state a material fact necessary to make the statements made, in light of the circumstances under which such statements were made, not misleading with respect to the period covered by this report;
3. Based on my knowledge, the financial statements, and other financial information included in this report, fairly present in all material respects the financial condition, results of operations and cash flows of the registrant as of, and for, the periods presented in this report;
4. The registrant’s other certifying officer(s) and I are responsible for establishing and maintaining disclosure controls and procedures (as defined in Exchange Act Rules 13a-15(e) and 15d-15(e)) and internal control over financial reporting (as defined in Exchange Act Rules 13a-15(f) and 15d-15(f)) for the registrant and have:
(a) Designed such disclosure controls and procedures, or caused such disclosure controls and procedures to be designed under our supervision, to ensure that material information relating to the registrant, including its consolidated subsidiaries, is made known to us by others within those entities, particularly during the period in which this report is being prepared;
(b) Designed such internal control over financial reporting, or caused such internal control over financial reporting to be designed under our supervision, to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles;
(c) Evaluated the effectiveness of the registrant’s disclosure controls and procedures and presented in this report our conclusions about the effectiveness of the disclosure controls and procedures, as of the end of the period covered by this report based on such evaluation; and
(d) Disclosed in this report any change in the registrant’s internal control over financial reporting that occurred during the registrant’s most recent fiscal quarter (the registrant’s fourth fiscal quarter in the case of an annual report) that has materially affected, or is reasonably likely to materially affect, the registrant’s internal control over financial reporting; and
5. The registrant’s other certifying officer(s) and I have disclosed, based on our most recent evaluation of internal control over financial reporting, to the registrant’s auditors and the audit committee of the registrant’s board of directors (or persons performing the equivalent functions):
(a) All significant deficiencies and material weaknesses in the design or operation of internal control over financial reporting which are reasonably likely to adversely affect the registrant’s ability to record, process, summarize and report financial information; and
(b) Any fraud, whether or not material, that involves management or other employees who have a significant role in the registrant’s internal control over financial reporting.
Date: June 6, 2024
/s/ Feng-Ming Wang |
Feng-Ming Wang |
President and Chief Executive Officer |
(Principal Executive Officer) |
Exhibit 31.2
CERTIFICATION OF PRINCIPAL FINANCIAL OFFICER
Certification of Principal Financial Officer Required Under Rule 13a-14(a) and 15d-14(a) of the
Securities Exchange Act of 1934, as amended.
I, John A. Young, certify that:
1. I have reviewed this Quarterly Report on Form 10-Q of Ambarella, Inc.;
2. Based on my knowledge, this report does not contain any untrue statement of a material fact or omit to state a material fact necessary to make the statements made, in light of the circumstances under which such statements were made, not misleading with respect to the period covered by this report;
3. Based on my knowledge, the financial statements, and other financial information included in this report, fairly present in all material respects the financial condition, results of operations and cash flows of the registrant as of, and for, the periods presented in this report;
4. The registrant’s other certifying officer(s) and I are responsible for establishing and maintaining disclosure controls and procedures (as defined in Exchange Act Rules 13a-15(e) and 15d-15(e)) and internal control over financial reporting (as defined in Exchange Act Rules 13a-15(f) and 15d-15(f)) for the registrant and have:
(a) Designed such disclosure controls and procedures, or caused such disclosure controls and procedures to be designed under our supervision, to ensure that material information relating to the registrant, including its consolidated subsidiaries, is made known to us by others within those entities, particularly during the period in which this report is being prepared;
(b) Designed such internal control over financial reporting, or caused such internal control over financial reporting to be designed under our supervision, to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles;
(c) Evaluated the effectiveness of the registrant’s disclosure controls and procedures and presented in this report our conclusions about the effectiveness of the disclosure controls and procedures, as of the end of the period covered by this report based on such evaluation; and
(d) Disclosed in this report any change in the registrant’s internal control over financial reporting that occurred during the registrant’s most recent fiscal quarter (the registrant’s fourth fiscal quarter in the case of an annual report) that has materially affected, or is reasonably likely to materially affect, the registrant’s internal control over financial reporting; and
5. The registrant’s other certifying officer(s) and I have disclosed, based on our most recent evaluation of internal control over financial reporting, to the registrant’s auditors and the audit committee of the registrant’s board of directors (or persons performing the equivalent functions):
(a) All significant deficiencies and material weaknesses in the design or operation of internal control over financial reporting which are reasonably likely to adversely affect the registrant’s ability to record, process, summarize and report financial information; and
(b) Any fraud, whether or not material, that involves management or other employees who have a significant role in the registrant’s internal control over financial reporting.
Date: June 6, 2024
/s/ John A. Young |
John A. Young |
Chief Financial Officer |
(Principal Financial and Accounting Officer) |
Exhibit 32.1
CERTIFICATION OF PRINCIPAL EXECUTIVE OFFICER AND PRINCIPAL FINANCIAL OFFICER
PURSUANT TO
18 U.S.C. SECTION 1350,
AS ADOPTED PURSUANT TO
SECTION 906 OF THE SARBANES-OXLEY ACT OF 2002
I, Feng-Ming Wang, certify, pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002, that the Quarterly Report of Ambarella, Inc. on Form 10-Q for the fiscal quarter ended April 30, 2024 fully complies with the requirements of Section 13(a) or 15(d) of the Securities Exchange Act of 1934, as amended, and that the information contained in such Quarterly Report on Form 10-Q fairly presents in all material respects the financial condition and results of operations of Ambarella, Inc.
Date: June 6, 2024
|
|
|
By: |
|
/s/ Feng-Ming Wang |
Name: |
|
Feng-Ming Wang |
Title: |
|
President and Chief Executive Officer |
I, John A. Young, certify, pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002, that the Quarterly Report of Ambarella, Inc. on Form 10-Q for the fiscal quarter ended April 30, 2024 fully complies with the requirements of Section 13(a) or 15(d) of the Securities Exchange Act of 1934, as amended, and that the information contained in such Quarterly Report on Form 10-Q fairly presents in all material respects the financial condition and results of operations of Ambarella, Inc.
Date: June 6, 2024
|
|
|
By: |
|
/s/ John A. Young |
Name: |
|
John A. Young |
Title: |
|
Chief Financial Officer |