Operator
Good day, everyone, and welcome to ClearSign Technologies' third quarter, 2026 earnings conference call. At this time, all participants are placed on a listen-only mode, and we'll open the floor for your questions and comments after the presentation. It is now my pleasure to hand the floor over to your host, Matthew Selinger, Investor Relations at ClearSign. Sir, the floor is yours.
Good afternoon, and thank you, operator. Welcome, everyone, to the Clearside Technologies Corporation third quarter 2026 corporate update call. During this conference call, the company will make forward-looking statements. Any statement that is not a statement of historical fact is a forward-looking statement. This includes remarks about the company's projections, expectations, plans, beliefs, and prospects. These statements are based on judgments and analysis as of the date of this conference call. The risks and uncertainties associated with the forward-looking statements made in this conference call include, but are not limited to, whether field testing and sales of ClearSign products will be successfully completed, whether ClearSign will be successful in expanding the market for its products, Timing of customer orders and our ability to convert proposals into orders, delays, holds, or cancellations of customer projects, the performance of our products in the field and related warranty costs, our reliance on original equipment manufacturers and other third parties, Our ability to obtain additional financing, and other risks that are described in ClearSign's filings with the SEC, including those discussed under the Risk Factor section of the Annual Report on Form 10-K for the fiscal year ended December 31, 2025, and on our quarterly report on Form 10-Q for the quarter ended September 30, 2026, and, of course, our subsequent filings. Any estimates we discussed today regarding our pipeline or potential future orders are forward-looking statements and are not guidance. Except as required by law, ClearSign assumes no responsibility to update these forward-looking statements to reflect future events or actual outcomes that's not intended to do so. So, on the call today, with me are Jim Deller, ClearSign's Chief Executive Officer, and Brent Hines, ClearSign's Chief Financial Officer. So, with that, I am going to turn the call over to Jim Deller. Jim?
Thank you, Matthew. As always, I'd like to thank everyone for joining us on the call today and for your continued interest in ClearSign. Like our most recent calls, we will use a Q&A format for this session. Some of you have sent in questions ahead of time. We did assimilate those questions into the questions that we will cover today. For the call today, Matthew will lead the question and answer session where we'll go through the different business units, much like our previous calls. Many of you have seen this, but you can send in questions ahead of time to our investor relations at M-S-E-L-I-N-G-E-R at firmirgroup.com. We will start with Brent Hines going over the company financials for the third quarter of 2026.
Thank you, Jim, and thank you to everyone joining us here today. Before I begin, I'd like to note that our financial results on Form 10Q was filed earlier this week with the SEC. With that, I'd like to give an overview of our financial results for the third quarter of 2026. For the third quarter of 2026, the company recognized approximately $712,000 in revenues compared to approximately $1 million for the same period in 2025. The year-over-year decrease in revenue was primarily attributable to product mix. While the product mix during the quarter resulted in lower reported revenue, it generated meaningful improvement in gross margins. As discussed in our Q2 conference call, we entered into a licensing arrangement with an OEM heater manufacturer to build three M-series midstream burners, and we successfully fulfilled our obligations under this arrangement during the third quarter of 2026. Our third quarter gross profit margin was approximately 55.6%, which is an increase of almost 20 percentage points over the prior comparable period's margin of 35.8%. This year-over-year improvement in gross margin was primarily driven by our licensing arrangement with an OEM leader manufacturer. We believe licensing arrangements like this further diversifies our go-to-market strategy. And we expect to continue pursuing such arrangements to further expand our revenue channels. We also believe licensing arrangements like this will bolster our overall gross margin and help us achieve our overall long-term company gross margin target of 40%. Now moving on to the full P&L. Our net loss for the third quarter decreased by $361,000 compared to the same period in 2025. The decrease in our net loss was predominantly driven by a $601,000 decrease in general and administrative expenses, offset by a $233,000 decrease in other income. Our G&A expenses decreased predominantly due to a one-time non-cash expense in the prior period related to the vesting of restricted stock units issued to our former directors. Other income decreased predominantly because our Department of Energy grant completed in May of 2026. Now let's shift our focus to cash. Our net cash used in operations for the third quarter of 2026 was approximately $1.3 million compared to approximately $1.8 million for the same period in 2025. This improvement was driven predominantly by timing of customer cash collections. As of September 30th, 2026, we had approximately $10.3 million in cash and cash equivalents. As of September 30th, 2026, we had approximately 6.8 million shares of common stock outstanding. And with that, I'd like to turn the call over to Matthew Sillinger.
Brent, thank you for the financial overview. And Jim, thank you for joining me today here. I'd like to start the call with a brief overview of Clearside, Jim, what we do, how we do it for any new investors. After that, I think we'll dive into the product lines and company developments. So with that, Jim, could you summarize briefly for HighLevel, what does Clearside do?
Yes, certainly. So a really high level, right? We have unique IP and some leading engineers for the company. In essence, we've had a technologically advanced solution to enable energy companies to efficiently meet their clean air emissions obligations. So our clients are large oil refineries, petrochemical companies, midstream gas companies, generally companies in the energy business. As part of their production, they burn fuel gases, natural gas or gas blends, to make their processes work. Whether it's heating up oil to break it down or whatever, as part of that combustion process. They make toxic gases, and we're primarily concerned with NOx emissions. These are nitrogen oxides. These gases are highly regulated. They have to operate within them to stay within their permits. They're controlled by the local air regulators. And the traditional technology that allows them to get down to the latest levels we're seeing in California and Texas is what they call a selective catalytic reduction unit. This is a very expensive piece of equipment that has to be built into the back end of their heaters, and then it has to be supplied with ammonia to operate. With that unique technology, we can provide special burners that essentially do not make the NOx emissions in the first place. You might, you know, we've all, you know, had kids, you might compare it to your kids and explain to them, hey, it's much better not to make the mess in the first place than to have to go to the expense of cleaning up afterwards. To put some numbers to that, one of our, by talking to the customers from one of our projects that we have to date, for their project, their estimate to put an SCR and solve their problem that way was $50 million. Using the clear sign burners, we believe their total cost would be in a region of $5 to $10 million. So we're looking at an 80% cost savings for that client. If you look at a large refinery, they've probably got 40 to 50 heaters on that refinery. That savings will add up to hundreds of millions of dollars for that refinery if they apply it across the site. So it's a very meaningful opportunity. All right.
So, again, I know our technology has been referred to before, kind of maybe as a simple but elegant solution. So, like you said, again, we basically have a – call it a better combustion, a better flame that doesn't then produce these emissions in the first place. Fantastic. That sounds simple enough. Then how does ClearSign go about getting these solutions into the market? Yeah.
So this has been a key part of the strategy of ClearSign, certainly since... I joined. We have a very unique technology. We manage our sales. We have significant engagement with customers. But to provide the burdens in this industry, there are some what would be typical barriers to entry. You've got to be able to demonstrate your equipment operating at full scale. Plans like all refiners require you to manufacture equipment in shops that they have accredited themselves. Sending those up is a very cash-intensive business. We are judicial with our investors' money. We understand that's how we exist today. So we formed a strategy we call asset light. Essentially, we focus on the IP, and we have formed collaborative relationships with other companies that have the infrastructure we need that allows us to benefit from their infrastructure without that being either a capital cost or an ongoing cost for ClearSign.
Great. So again, simplifying again, you're basically leveraging existing businesses or infrastructure to bring kind of our advanced technology solutions to market.
Okay. All right. Well, let's go ahead and move, if you don't mind, into the product lines.
Does that work? Certainly. Yep.
And I think it makes sense to start with process burners here. We have a growing number of installations in the field, but in particular, we've been talking about a 26-burner order going to a Gulf Coast facility of a petrochemical customer for some time. And again, this installation was slated to start at the end of October and be operational here in this month. So I think everybody's waiting, especially our investors that follow us, how is this going?
Oh, everyone is waiting for this. It's going great. The, you know, you said the. The burners were due to install in October. That went absolutely smoothly, and they're due to start up in November, and I believe we're ahead of schedule on that timeline. It's looking really good. I think we'll be done within about a week. I'm really looking forward to having that done.
All right, and then again, so how, on this installation, either like or unlike others, how are we going to be able to kind of claim or signal a victory to the market and maybe an industry?
In terms of the... The event, if you like, this is different. This is a big, sophisticated heater on a global chemical company. So in these big installations, the equipment is monitored on a continuous basis. They have a system called No Descent, Continuing Emissions Monitoring Equipment, and that takes continuous measurements of the emissions going out of the stack and actually live streams it down to the airbores and, of course, to the operators and to the side Thank you. Those analyzers are calibrated and certified by the local air board, and that is the full measurement. So we will be watching, as will everybody else, watching those numbers to ensure that they are down below the permit and the guarantee levels at the end of this project. So that will be the success. And then for anyone looking at ClearSight, we have been focused on getting this project done and excited about it for so long that you will see. LinkedIn announcements and in time, presentations and other materials. But the data from those admissions monitors will be the metric, if you like, the event that everyone's looking for for the technical success of this installation.
Right. And you said to yourself, we put a lot of weight in a startup. So what do you think this means then for Clear Science prospects going forward? And how are we going to, in a sense, leverage this?
Oh, I think this is, I mean, all the time we've said that this is... Huge or really meaningful. We are talking and have been talking for a long time to either companies and importantly the lead engineers of the major refiners needing to comply with local emissions regulations. They understand the value of our technology. They understand what we do. Many of them have been to see our furnace at the test furnace. The only thing they're waiting on is having a place to go see it. It's almost like test driving a car or speaking to someone that's running it so they have the confidence to recognize this product for themselves. We've had literally the words of one of the leading engineers for major refining, so I want to be the first, second person to use your burners. This reference is a major installation on a global chemical company in the middle of our biggest market down on the Texas Gulf Coast. It's been engineered by the premier heater engineering company in the country, Bob Wolko. I mean, while we can't name the customer on the job site publicly, All right. Well, then conferences like the American Petroleum Institute that we go to, people are aware of this project. They've been watching it. So this is a really big deal for the place. I'm very excited to have this done.
All right. So it's obviously a big catalyst. Then, I mean, investors are going to want to know, Jim, you know, I guess, what are the next actionable items internally? You know, are we just going to let this kind of trickle out to the market? You know, how are our prospects going to know about this?
Oh, yeah. There will be many events. I mean, the key amount... I was down at the American Petroleum Institute last week and already talking to the lead engineers on refiners. They're aware that this project is stuck enough. When we get this project operating successful, I personally will be making phone calls to those people explaining what we've done, trying to talk to them to come and see it, trying to set up arrangements for them to witness it on the job site, making arrangements. Beyond that, I'm looking forward to conference presentations, magazine articles. Please ask anyone to follow us on LinkedIn. We will be putting information about this. Obviously, this will be a multi-layered approach, but it will start with these one-on-one phone calls. I mean, there are certain key people in the industry. That have talked to us about all the projects they're waiting for, they are going to be called and talked, and they'll be engaged in conversations as soon as we can get them on the phone.
Okay. Well, thank you. That's what investors are going to want to hear. So let's come back, and you did talk about a proposal pipeline, but I'll come back to that later, I think. Let's talk about other projects, right? We've got another notable project in process. A 32-burner order, and this is slated for California. What's the status of this project today?
So this one is going really well. In the big picture, the phase that we're at, we had a detailed engineering and testing phase that is almost down to completion. It's pretty much done with the point of discussing the witness date with the clients, and from there, we'll be moving on to the fabrication of the burners to ship the first half of the burners. The plan is to get those out and get those off and running and then to roll in and supply the second half. If I can, to talk a little bit more about this one. This project has been in the test firm a bit longer than the standard two to three weeks. The reason is this is a new configuration of... our Gen2 technology platform. So when we developed that Gen2 burner, we described it as a technology platform that's adaptable and usable for different installations. This is the burner in that flat flame configuration. So it's the first one we put in a flat flame. This expands our market to get us into a new section of the heaters on refineries, often the larger heaters. As we're going through this, we're adapting the flame to be optimized in that heater. From my perspective, though, additionally, why we're putting a lot of effort into this is I see this as a stepping stone to get into new markets for clear science. We've talked in the past, and I'm sure we'll talk again about high-temperature applications, down-fired reformers often for hydrogen production, ammonia production, things like that, and also for ethylene furnaces. The ethylene furnaces are flat-plane burners. The burner we have today is not suitable as it is for ethylene furnaces, but it is a significant step in that direction, and I think sets us up well to get engagement and start formally pursuing. That expansion of our business.
Okay, so I'm just going to back up and maybe unpack this. So, obviously, and we've talked about this in other calls, but the implication here, because of this different configuration, right, is that, A, it's a different implication for process burners, which we're already going through on this project, right, and demonstrating we can utilize this in a different type of – Yep, yep. But beyond that, in particular, this means, as you mentioned, this could enter us into... Other markets, you mentioned downfired reformer, ethylene, and these are massive markets as you've talked about in the past, right? If you could just give it a little color, the size of these in the market and the heaters.
Yeah, from my experience, well, typically the rather ethylene business for a burner manufacturer is as big as the refining business. So it'll double our market size that in itself. The downfired reformers. And these units can be up to over 200 burners in a single unit. Massive. So, again, both of these are very big burners. And the great thing is when you're making burners, whether it's ethylene or multiple furnaces side by side, or the downpipe reformers, you're building hundreds of burners exactly the same.
Yep. Okay. So this could be looked at as maybe a stair step towards that. What else would be needed for ClearSign to go into those markets?
Yeah, there is significant work that will go into... By developing the furnace, we call these high temperature applications for a reason. These furnaces are very hot. There will be research and development significant to develop these products. Going into this kind of a program... You really want to do that with a customer partner who is bought into the projects, so you make sure you're developing the right product, you're developing it as this customer needs it, and then at the end of the project, when you have it, that means you've got an installation lined up to put that burner into service and to demonstrate it and essentially to launch the product line. So there'll be a number of pieces. Go into getting these projects, but for me, we really want to get a customer partner engaged in this development so we can be assured of having a properly developed product at the end. We want the input, and we want a home for that first installation.
And has the company had any conversations with potential partners?
Yes. I mean, this is a – it's been part of our long-term. We get the process burners done first, but no, we have been actively talking with various people and entities about this project. We don't have anything formal arranged at this time, but it is a project that we are actively working on.
Okay, it's exciting. Let me get back to process burners, if you don't mind. And we also have announced. A 36-burner order, and this was going to Texas as well. But we mentioned in the last call, this one's been delayed a bit. Is there any change of status?
There is not. I mean, again, just to reiterate for anyone, we don't believe or we've been told this has nothing to do with clear scientists due to internal organizational changes within the client. For that, we also don't have any updates, so I don't have any news at this point. I just look forward to getting this project back on track.
Well, then, so just a few weeks ago, it was actually the last day of the quarter, the third quarter, September 30th. You announced, along with Kern Energy, that ClearSign had been selected for the DOE Industrial Technology Validation Program for a grant there. Could you give a little more color on this?
Yeah, this is, you know, it's a nice project. I think it's a great initiative from the DOE. This is a joint project between us and our long-term customer, Kern Energy. Basically, it's a DOE-funded project to pay for the installation of one of our latest Gen 2 process burners into a heater on the Kern Energy site. It's going to be a fast-term project. The DOE will provide the money. Kern will place a full purchase order on clear sign with that DOE money. So if it's an order for us, it gets another reference out in the field. So it's, yeah, great. Great little project for us.
Great. And I do want to highlight, though, while we're not waiting on this, quote, validation, right, this will be an additional validation or data point, right? This product is already out.
Oh, we have many, many quotes using this better technology. We demonstrate it to industry, but extra sites having your equipment up and running in addition to the order of the revenue. It would be a great reference. A win for clear sign, and... They're great to support a long-term customer.
Great. So in terms of looking at the process for our product line, what do the prospects look like? We talked about the proposal pipeline in the past. How is that still looking today?
I mean, these prospects are changing rapidly as we complete this project down in Texas. So this is really exciting times for us. We have talked in the past a lot about the one. One customer who's identified 10 heaters they want us to look at, there's other clients that we're installing burgers into that reference more heaters they want to look at when those are done, there's other refinery heaters resulting from the demonstration and other sales activities that we've quoted to. So there are a lot of proposal opportunities and clients that we're in discussions with about that heater, very much focused on this Texas startup to give them confidence. This is really exciting. Just the timing right now is a really big deal, and yeah, we're thinking about a week we'll have that Texas site. Okay.
And then when you say heaters, obviously, you mentioned, again, one company with 10 heaters or so. I think we mentioned this in the last call. You know, a good number, is it an average number of burners saying 10 burners? I know they could be 10 to 30, something in that ballpark.
I mean, that's fair. There are some smaller heaters with three to five burners, but if you look at the orders we have in-house right now, there's a 26 we started up down in Texas. There's 32 the Fat Flames we're sending out to California. The one down in Texas that's temporarily on hold was 32 burners. So, yeah. A heater is typically going to be, when we look at revenue numbers, $2 plus million. Okay, great.
Well, let's turn to the M-Series next, if you don't mind. This is the midstream product, and it seems that this has been growing into a steady stream of business. We had five orders in Q3, two so far already in Q4. Where is this business coming from?
But geographically, these orders are all coming out of the... The Permian region, West Texas area.
But we've shipped, is that correct, burners to other geographies, and then are you seeing other interests from other places as well?
We have burners in Oklahoma here right next to us, one in New Mexico. Going into energy installations, we have quotes into the Marsalis area, the northeast region, we have quotes into Canada. So we are seeing a much wider interest. The recent orders that we've processed, the five last month and two this month, are all going down to the Permian. So in terms of if we're going to go and set up a presentation somewhere, the big market right now, the growth is coming out of that Permian. Area, which is having these birds going down there for reference right into that region also is very powerful. And new heaters, too. Yes. So key, I think, differently from other industries, the midstream area is growing rapidly. I believe the growth was over 20 percent last year. This is for gas for export. It's for gas that's going into increased utilization. If you think of all these data sets we keep hearing about, they need gas to generate electricity. So there's a massive demand for... gas and the growth of the bitstream industry. So these, in fact, I believe all of these recent orders are new heaters going down to expansion of the assets down in the very region.
And these orders seem to turn a lot quicker, isn't that right?
Yes, certainly much faster than the process bonus. And the strategy we set this up was these are... Standard products. They're designed to be repeated and off the shelf, and we've got a sufficient frequency now, and our clients have standard heater sizes so that the drawings for these orders and the engineering is already done. So we get an order. Our vendors already have the drawings for these recent sizes. We're able to just grow some more vendors. So we get to the point of achieving the efficiency that we'd envisioned when we formed the strategy for. For this product line. So with that, the timing, we can turn these orders now in three to four months.
Yeah, I mean, I think we saw that. I think we saw orders. As Brent mentioned, we had orders in Q2, obviously, shipped and booked in Q3, right? So these are going to be a much quicker. And theoretically, we could have, we could fulfill one within the same quarter. I don't want to get aggressive.
But when you time. If we receive in the first week of the quarter, it's feasible. It's feasible for us to turn it in a quarter. The two we've received this month, you know, they come in, the client has a request. They'll be shipped out in Q1 2027.
And you alluded to that in the last press release, in the last order, correct, talking about those said efficiencies in the manufacturing process.
Yes. I mean, for us, the consumption of our resources is minimal now. We've got the work done. We obviously place the order or overseer for shipments and shipping and things like that. The engineering and the design work is already done.
Okay, and then let's talk some numbers, Jim. What's the dollar range that these burners are selling for?
Yes, these are a wide-ranging product. In dollars from our standard sizes, they run from about $50,000 up to about $250,000 per burner. Thank you. Put the current orders in perspective, most of these are a large size. They're not the largest, but they're running in the $180,000 range.
Okay, that's great. And so what sort of run rate do you think was obtainable that we could see in this product line?
I think we've got some data to give us confidence. In the last quarter, we ran five burners last quarter. We already got two in for this quarter. The quarter's not over yet. My goal for these products down in the permit basin when we get these up and running is to just be the go-to 9 ppm midstream burn supplier. If we get them proven, I think that's very achievable. I see no reason we shouldn't expect to at least maintain that 5 per quarter run rate of it, rather than 20 per year. Okay, perfect.
All right. Let's take a look over to Flair, if you don't mind. What is the latest development on the Flair product line?
Yeah. This is similar. I really thought all about quality lines. We've had, we've talked about this. This year has been getting, we've got our products worked out in getting the big installations out running. So like the Gulf Coast process burners like that. But we've actually got great M-series out of getting those out, establishing the industry. And it's the same for flares, our biggest flares system. This is out in California. It's just about complete. It's scheduled to start up by the end of the year. This will be a great reference, because we know that that client has permits in progress that reference ClearSign technology. We believe they're waiting for this startup to proceed with other flares, just really the same situation we are with the others. So this startup is going to be very significant for us. But this is a, right, also I have... We've also talked about taking the flare as a burner product and turning it into a full million dollar system. This is a $1.5 million project of a complete flare system that ClearSign is now starting up in California and really showing, hey, we are a flare supplier.
Yeah, so similar then to, like you said, the 26 burner order kind of demonstrating this full system. You believe it will be a catalyst? Yes.
I mean, this is a big, very credible flair in the industry. I'm getting this front running, and what's rare amongst the flares is a flare that can actually meet a measured emissions permit for NOx is going to be very special in the market. So this is a big deal.
And this product line, I mean, it's not going to turn as quickly as, let's say, the M series, right? But do you have a target or desirable? You're selling, do you think, over a year on these?
Yeah, desire was a different thing. I think seeing what we're seeing, right, this is a fairly low product predominantly in California. There's been a little bit of interest in other places. I think it's reasonable to look at three, possibly four per year as a runway based on what we're seeing at this time. This one will be lumpy. The nice thing with the midstream is that there's enough volume now and they're fast enough. I think we can start to see a smoother supply of those. I think the flares are going to be on an individual basis, so it may not be so steady. But I think for long-term run rates, that's probably a fair expectation based on the technology in the markets where they are today.
So I'm going to bring all the product lines together, if you don't mind, Jim, because we are nearing the end of the year. But are there milestones we can look for between now and the end of the year? Or do we jump to 2027?
No. I mean, when we talk to us on this, Kim, hopefully within a week, we're making phone calls about that Texas project. By the end of the year, we'll get the flair started out. The way the midstream industry has been performing and being productive for us, I'm hoping we're going to get some more midstream orders before the year is out. Within the more strategic long-term developments that we're making that clear sign, there are, as I've alluded to, there's conversations we're having trying to put the plan together for moving into things like the high temperature burners. So there's, right, certainly internally, whether it's something we've announced or not, but I'm certainly looking to make progress on those projects before the year end as well. So there's a lot. We've got a lot to do this year. We haven't finished yet.
Okay, that's great. Well, then how about, thank you for that. How about 2027? Let's talk about next year. I know you've spent time to talk about, you know, the pipeline, and we've put some pieces together here in this conversation. But what do you think 2027 could look like for ClearSign?
I'm excited about next year. I mean, we've... We've really gone through this year focusing on getting these major startups and references out, operating in the field, talking about those. But we've brought that together, and this year we're right in the final stages of wrapping that up. So next year's the time to get the benefit of those. So we'll be out promoting the text installation, having that great reference in place. I'm looking at bringing in process one of the burner orders next year. That reference in place, bringing the people in. Yeah, yeah. Converting those, let's get moving on those priorities. I'm looking for process burner orders. I'm looking to follow on from the flare installation. I'm really excited about the midstream. Getting these, the burners that we've seen going out to midstream, many of those are scheduled to start up in Q1, something Q2. That will give us functioning burners down in the Permian Basin in these big installations. I said, I want to be the go-to supplier for those burners. I think we've got a fantastic technology in the M1 burners. I don't want anyone to have any questions why they shouldn't just order them from us. I'm really looking forward to developing a steady stream of M-series burners.
It would be safe to say that 2026 is really kind of, you know, lack of a bit of establishing product line, and 2027 will be converting conversions of those products.
I mean, that's a high-level look, but that's what I'm saying. We've truly talked about that, right, getting these major installations focused on development technology, the demonstration of the... We're at the Gen 2 burner early in the year, focusing on the startup of the Gulf Coast, which is occurring as we speak. So yes, I think that's, you know, we're really looking forward to getting out and using those references to validate our technology and start to give our customers confidence to move forward with their promotion.
So with that, let me ask. Let me ask you this thing, Jim. You know, how is the ClearSign team doing? What's the internal sentiment?
I mean, they're excited. I mean, the... The more we've got going on, so if you just look back over the last month or two months, we've had a team down on the Gulf Coast site going through the installation, checking that out, going through the startup, working with the operators, working with the client and the log for the engineering company, and at times that's been around the clock. We've truly had a team down there. At the same time, we've been running multiple burner tests. So our engineering team, we have a lean team here. We're asset light. Everyone wears many hats. They really dig deep and do what they've got to do. We have Brendan's finance team in that have been out at the Modi Midstream Burners at a midstream event showing off their amazing sales skills. So we've truly had all of the company doing what has to be done. We're very careful within the company to have frequent weekly communications to keep everyone up to speed on all of our projects, what we're doing, where we're going as a company. I believe everyone's really excited right now. They're seeing the success that we're getting using from Texas. We're seeing the steady stream, the midstream waters coming in. Guys lined up waiting to go and start the flare-up out in California. People are excited here. I mean, they're working hard now. I really appreciate that.
Did I hear you correct saying that even Brent was out on the sales calls?
Yes, Brent and the whole sales team. Everyone was out. I think the office was pretty much empty.
Was that – I wonder, can I attribute the uptick in the gross margins in this month to that, Brent?
Yes, you certainly can. Okay, great.
So with that, there are no more formal questions from my side. We're going to go ahead and open it up if we could, operator. We'll take a pause here, but can we please open it up for question and answer session?
Operator
Certainly. Everyone at this time will be conducting a question-and-answer session. If you have any questions or comments, please press star 1 on your phone at this time. We do ask that while posing your question, please pick up your handset, if you're listening on speakerphone, to provide optimum sound quality. And once again, if you have any questions or comments, please press star 1 on your phone. Please hold while I pull for questions. Thank you. Your first question is coming from Samir Joshi from H.C. Wainwright. Your line is live. Hey, good afternoon, everyone.
Thanks for taking my questions. Just a few on gross margins and then order flow. The gross margins this quarter were better, and I saw some reference to licensing arrangement contributing to this. Can you explain that a little bit more?
Yes, I can. Thank you for the question, first of all.
The licensing sales, we've had this as part of our plan for ClearSign really from the start as a part of the long-term strategy, especially looking at scalability and how do we grow the business. It's also one of the benefits of product lines like the midstream burners, in this case, where we have standard products. And we have clients that have the ability to manufacture their own burners. What's special to ClearSign is the IP and the designs. So, in this case, we are able to provide the fabrication drawings to the client on a licensing basis to give them the ability to
fabricate their own burners. Thank you.
The benefits of the client are they get to manage the schedule. It obviously saves them money because we're not paying a third party to fabricate the burners. For ClearSend, we make exactly the same profit, whether it's a license sale or whether we are supplying the equipment. Of course, it's really been a win-win. The burners the client manufactured look fantastic. I actually got to see them myself. We also put some photographs on LinkedIn. If anyone's flying us, they've been shipped down to the Pervian Basin. So that went really well. We believe that the client will continue to purchase the burners for their use in that way going forwards.
And it's been a very good development for ClearSign, as you saw in the margins.
So, thanks for that. Should we expect, or let me ask it this way, are there other and more customers who are looking at this model, or it's only this one customer that is looking to manufacture it themselves?
We certainly expect repeat orders from this customer. You know, I don't know the plans of other customers. I would certainly be open to it. One of the criteria, of course, is they have to have the ability to manufacture the burners themselves, but I'm absolutely open to that. At this point, though, I've not had any other discussions about this type of order with other customers.
As I said, not at this time, but we certainly expect more orders in this manner from this one customer.
Understood. And then, moving on to the M-Series, I think it was mentioned that you had five orders in 3Q and two orders in 4Q so far. Should we expect... There's additional orders in 4Q that you may announce, and I think you did address how 2027 looks for that, but how should we look at the order flow going into the end of the year?
Yeah, absolutely. I mean, for us, the year is not over yet. We have a lot of ongoing interest in the midstream burners, and what actually makes these questions hard to answer specifically is We have orders coming in that we have not specifically quoted, but we've given our customers sufficient details of our standard burners that match their standard heaters, so they are now quoting their standard heaters, including our burners, on opportunities that they've not necessarily told us about.
So we have actually received purchase orders out of the blue that we've had to... But log into our system without having a prior quote.
So given that, and given the conversations we're having and the amount of interest we're seeing, I don't have, and I can't make any guarantees, but yes, I am expecting additional orders for M-series burners before the year is out, just given the nature of the industry and the rate that we've seen
these orders come in and just the general interest in the industry.
Thanks for that. And just one last one maybe for Brent and maybe I missed it in the commentary, but in addition to operating expenses being lower year-over-year, they were lower sequentially as well. So was there an explanation given for the sequentially lower OPEX?
Yes. If you look in the MD&A section of the queue, you'll see the information. It's really driven by that divesting were restricted stock units, which were non-cash, and legal expenses as well.
The reduction from 2025 into 2026. Got it.
Thanks a lot, and good luck.
Operator
Thank you. And once again, everyone, if you have any questions or comments, please press star, then one on your phone. Your next question's coming from Peter Gastrich from Water Tower Research. Your line is live.
Thank you. Hi, Jim. Thanks for taking my questions, and congratulations on the quarter. It's, you know, good to hear the Gulf Coast burners are up and running, and, excuse me, nice to see the M1 orders, you know, keep coming in. So my first question is about DOE and current energy. So this program, you know, looks very interesting. Could you give us, you know, a sense of the size of the opportunity and roughly when the burners would go in?
This is a fast-term project and a chance to get our new Gen 2 technology out into the field. We're able to address a particular need on this job site, so it's a single burner heater. There's a lot of engineering involved in the order. I don't have the specific numbers to hand, but it's in the range of $500,000 to $750,000 from memory. I'll apologize in advance, and I'll off with that, but from seeing the contact documents, I believe those numbers are accurate.
Thank you. Oh, sorry. Sorry. You asked about the timing, and I'll tell you my expectations. We've completed the contractual details which involve the representative. Of the DOE, we still have to work out the exact schedule with CURN. My expectations are that we will receive the order from them early Q1. I do believe that they're still completing the permit, so that is a caveat on that statement. And with that, my best guess will be to complete the order somewhere around late Q3, early Q4 next year. Again, those are... Estimates on my part, we've not worked out those details yet, so they may change, but that's my expectation for the progression of that project.
So most of my detailed questions that I had in mind have been answered, and I appreciate that. So I just have a couple of, you know, bigger picture questions for you. So your team has talked about burners that improve yield and uptime, not just cut the emissions. So are there customers, you know, that are generally starting to see ClearSign as a way to improve plant profitability, and could that open additional markets that aren't necessarily driven, you know, purely by Knox rules, or is that not the right way to look at it?
No, that, Peter, is exactly the right way to look at those opportunities. And really what's exciting is if we can improve the yield or improve the uptime for a client, we're no longer just a cost for compliance with emissions. We actually give them a significant return on their investment. And the Texas project that is currently on hold, unfortunately, was actually based on improving the... of uptime of that furnace as one of the primary drivers. So that was one project that's been through the engineering. We completed the CFD modeling, and we're able to demonstrate those benefits to the customer at that phase. So yes, it is something we're pursuing. It's something we've been able to demonstrate to that client. And going forwards, as we're able to show more and more to the industry what we can do, my expectation is that we will be able to capitalize on that ability to a greater extent.
And just a final question. So your CTO, Matt Martin, he mentioned on our podcast a little bit ago that the M-Series and a flare design went straight from computer modeling to the field. I just want to ask, how does that change the cost and speed of bringing new products to market, and where does AI kind of fit in with ClearSign?
First question is if. The ability to
design a burner in CFD to the extent that we can create fabrication drawings and send it out to the field and have the success we've had on the M1 burner is a game changer. It typically takes probably an additional six months to a year. When you're going through the slow process of optimizing a burner in a test furnace, and then you have to wait for mechanical changes to be made and then fire it up. In the computer, you can check out different ideas. You can see what's going on inside the burner and inside the flames. And then rather than speculating what changes you need to make, you can actually see what's going on and make surgical changes to optimize the process. So, the... For anyone who doesn't know this, the very first M1 burner was drawn from the output from our computer modeling program. It was put in a heater, and that design has never been touched. And that burner has actually demonstrated NOx down below 2 ppm. It is still out there running today and is the benchmark for our entire M1 product line. So this is one of the... I just want to brag a little bit on our CTO, Matthew Martin, the resources here at Clirsa. We've been able to develop the computer modeling technology for combustion systems and burners, I believe, to probably the greatest extent of anywhere in the world, in my opinion. And that has allowed us to bring technologies like this to market in the speed that we have, and to actually put them out in the field and have the success we've had both with the flare. And the M-Series, but here's your basic question. It is hugely significant for ClearSign and the speed that we can bring not only new technologies, but also adapt technologies for specific client needs and show them how those products will work modeled inside their furnace as part of our sales or project validation process.
So it is extremely powerful. Great. Thanks very much, Jim, and congratulations. I'll get back in the questions queue. I appreciate your questions, Peter. Thank you.
Operator
Thank you. There are no further questions in the queue.
Operator, I'm going to go ahead and read a couple, Jim, if you don't mind.
Cool. It's from email. And I think you touched on this one, Jim, but the question is this. It's clear that large-scale orders may have been held back while the old guard in the energy business waited to be absolutely sure they would work as expected.
So is this 26-burner startup likely to be a seminal event that opens the floodgates? We believe so.
I mean, that is – Based on what we've been told from the clients, they are, above everything else, they are waiting to see the technology running in somebody else's heater. So, yes, on the simple answer, that is, yes, we believe so. We're just excited to be able to get out and talk about it.
And, Jim, in the past, the company, you have stated kind of a break-even number of 160 burners.
You know, a year. Do you believe that's obtainable potentially next year, or is that a further target?
What are your thoughts there? Yeah. And that number is based on a $100,000 per year, so $60 million run rate, right? The math works out to get the company to break in. We absolutely have the line of sight in the pipeline to get to that number. I mean, it's three or four process burner orders, a couple of flares, and then the runway with the M-Series. I mean, it's a very...
Thank you, everyone. I really appreciate you tuning in. To this call, I'm going to be interested in ClearSign, especially taking your time and giving us your time this afternoon. We look forward to updating you regarding our developments and speaking with you on our Q4 and full year call in April next year. But we don't plan on being quite with news on then. So please continue to check in on the website. I do encourage you to follow us on LinkedIn.
Of course, when we have a significant announcement, we will be putting press releases out. In addition to that. So thank you very much.
Operator
Thank you. Everyone, this concludes today's event. You may disconnect at this time and have a wonderful day. Thank you for your participation.