First Breach, Inc 8-K, filed Oct 21, 2026
First Breach, Inc. (FBDT)
About this 8-K
First Breach, Inc filed this 8-K on October 21, 2026, reporting on events of October 15, 2026.
First Breach announced its proprietary drone prototype reached 161 km/h (100 mph) in flight testing without a payload, the Federal Aviation Administration’s Part 107 maximum groundspeed without a waiver. It is seeking FAA authorization to test above that limit. AI summary
Items reported
- Item 7.01: Regulation FD disclosure
- Item 9.01: Financial statements and exhibits
UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549
FORM
CURRENT REPORT
PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
Date of report (Date of earliest event reported):
(Exact Name of Registrant as Specified in Its Charter)
(State or Other Jurisdiction of Incorporation)
(Commission File Number) |
(IRS Employer Identification No.) |
| (Address of Principal Executive Offices) | (Zip Code) |
(Registrant’s Telephone Number, Including Area Code)
N/A
(Former Name or Former Address, if Changed Since Last Report)
Check the appropriate box below if the Form 8-K filing is intended to simultaneously satisfy the filing obligation of the registrant under any of the following provisions (see General Instruction A.2. below):
| Written communications pursuant to Rule 425 under the Securities Act (17 CFR 230.425) | |
| Soliciting material pursuant to Rule 14a-12 under the Exchange Act (17 CFR 240.14a-12) | |
| Pre-commencement communications pursuant to Rule 14d-2(b) under the Exchange Act (17 CFR 240.14d-2(b)) | |
| Pre-commencement communications pursuant to Rule 13e-4(c) under the Exchange Act (17 CFR 240.13e-4(c)) |
Securities registered pursuant to Section 12(b) of the Act:
| Title of each class | Trading Symbols | Name of each exchange on which registered | ||
Indicate by check mark whether the registrant is an emerging growth company as defined in Rule 405 of the Securities Act of 1933 (17 CFR §230.405) or Rule 12b-2 of the Securities Exchange Act of 1934 (17 CFR §240.12b-2).
Emerging
growth company
If
an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying
with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act.
Item 7.01. Regulation FD Disclosure.
On October 15, 2026, First Breach Inc. (the “Company”) issued a press release announcing that Chief Revenue Officer Ken Leith will present at the 20th Annual LD Micro Main Event, taking place October 19-21, 2026, at the Luxe Sunset Boulevard Hotel in Los Angeles, California. A copy of the press release is furnished as Exhibit 99.1 to this Current Report on Form 8-K.
On October 20, 2026, the Company issued a press release announcing that its proprietary drone prototype has reached a speed of 161 km/h (100 mph) in flight testing without a payload, the maximum groundspeed the Federal Aviation Administration permits for small unmanned aircraft under Part 107 without a waiver. A copy of the press release is furnished as Exhibit 99.2 to this Current Report on Form 8-K.
The information in this Item 7.01, Exhibit 99.1, and Exhibit 99.2 furnished hereto shall not be deemed “filed” for purposes of Section 18 of the Securities Exchange Act of 1934, as amended (the “Exchange Act”), or otherwise subject to the liabilities of that section, nor shall it be deemed incorporated by reference in any filing under the Securities Act of 1933, as amended, or the Exchange Act, except as expressly set forth by specific reference in such a filing.
Item 9.01. Financial Statements and Exhibits.
| (d) | Exhibits |
| Exhibit No. | Description | |
| 99.1 | Press Release, dated October 15, 2026 | |
| 99.2 | Press Release, dated October 20, 2026 | |
| 104 | Cover Page Interactive Data File (embedded within the Inline XBRL document) |
| 2 |
SIGNATURES
Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned hereunto duly authorized.
| Dated: October 21, 2026 | First Breach Inc. | |
| By: | /s/ Jeffrey Low | |
| Name: | Jeffrey Low | |
| Title: | Chief Executive Officer | |
| 3 |
Exhibit 99.1

First Breach to Present at the 20th Annual LD Micro Main Event
Chief Revenue Officer Ken Leith to present on Tuesday, October 20, at 4:30 p.m. Pacific Time
HAGERSTOWN, MD / October 15, 2026 / First Breach Inc. (NASDAQ:FBDT) (“First Breach” or the “Company”), an American-made defense technologies company focused on vertically integrated ammunition production and next-generation unmanned aerial systems, today announced that Chief Revenue Officer Ken Leith will present at the 20th Annual LD Micro Main Event, taking place October 19-21, 2026, at the Luxe Sunset Boulevard Hotel in Los Angeles, California.
Mr. Leith is scheduled to present on Tuesday, October 20, 2026, at 4:30 p.m. Pacific Time. His presentation will provide an overview of First Breach’s business, including its ammunition manufacturing operations and the development of its proprietary unmanned aerial systems.
Mr. Leith will also be available for one-on-one investor meetings on Tuesday, October 20. Investors interested in meeting with First Breach can request a meeting through LD Micro or contact the Company’s investor relations representative below.
Presentation Details
Event: LD Micro Main Event XX
Presenter: Ken Leith, Chief Revenue Officer
Date: Tuesday, October 20, 2026
Time: 4:30 p.m. Pacific Time
Location: Luxe Sunset Boulevard Hotel, Los Angeles, California
Webcast: LD Micro Webcast
About the LD Micro Main Event XX
The 20th Annual LD Micro Main Event will take place October 19-21, 2026, at the Luxe Sunset Boulevard Hotel in Los Angeles. The conference brings together public companies and investors for company presentations, private meetings, and networking opportunities. To register to attend the event or for webcasts, use the following link: LD Micro Webcast.
About First Breach
First Breach Inc. is an ISO 9001:2015 certified, American-made defense technologies company focused on manufacturing match-grade ammunition components, finished ammunition, and developing next-generation unmanned aerial systems for commercial, law enforcement, and military markets. The Company manufactures its products in-house at its Hagerstown, Maryland facility, where it produces brass cups, casings, projectiles, lead cores, lead wire, and completed ammunition with rigorous quality control standards. First Breach is also advancing its drone strategy through the development of U.S.-made unmanned systems, leveraging advanced engineering, robotics, ISR and sensor technologies, and precision manufacturing capabilities to address evolving defense, homeland security, law enforcement, and commercial requirements across domestic and international markets.
For more information, please visit: First Breach Inc.
Cautionary Note Regarding Forward-Looking Statements
This press release contains forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995. Forward-looking statements are not historical facts and include statements regarding the Company’s expectations, beliefs, plans, objectives, strategies, future events, future performance, business prospects, growth initiatives, acquisitions, market opportunities, capital resources, operational objectives, and other statements that are predictive in nature. Forward-looking statements may be identified by the use of words such as “anticipate,” “believe,” “continue,” “could,” “estimate,” “expect,” “forecast,” “intend,” “may,” “plan,” “potential,” “predict,” “project,” “seek,” “should,” “target,” “will,” “would,” and similar expressions, although not all forward-looking statements contain these identifying words.
Forward-looking statements are based on management’s current expectations, assumptions, and beliefs regarding future developments and their potential effect on the Company. These statements are not guarantees of future performance and involve known and unknown risks, uncertainties, assumptions, and other factors that may cause actual results, performance, or achievements to differ materially from those expressed or implied by such forward-looking statements.
Factors that could cause actual results to differ materially from those expressed or implied by forward-looking statements include, but are not limited to, changes in economic, business, market, competitive, regulatory, technological, legal, and geopolitical conditions; the Company’s ability to execute its business strategy; access to capital and financing; customer demand; industry developments; and other risks and uncertainties described from time to time in the Company’s filings with the U.S. Securities and Exchange Commission, which are available for review at www.sec.gov.
Readers are cautioned not to place undue reliance on forward-looking statements, which speak only as of the date they are made. Except as required by applicable law, the Company undertakes no obligation to update, revise, or publicly disclose any revisions to any forward-looking statements to reflect events, circumstances, or changes in expectations occurring after the date of this press release.
Investor Relations
Frank Pogubila
Partner
Integrous Communications
Phone: 951.946.5288
Email: fpogubila@integcom.us
Website: www.firstbreach.com
For additional company updates, follow First Breach on LinkedIn, X, and Facebook.
Exhibit 99.2

First Breach Drone Prototype Reaches 161 km/h (100 mph) in Flight Testing
Prototype hits the maximum groundspeed permitted under FAA Part 107 without a waiver; Company is pursuing FAA authorization to test beyond it.
Demonstrated speed places the platform at the upper end of small one-way attack systems in the field today, as the Company continues toward initial prototype completion in Q4 2026 and scaled production in Q2 2027.
HAGERSTOWN, MD / October 20, 2026 / First Breach Inc. (NASDAQ:FBDT) (“First Breach” or the “Company”), an American-made defense technologies company focused on vertically integrated ammunition production and next-generation unmanned aerial systems, today announced that its proprietary drone prototype has reached a speed of 161 km/h (100 mph) in flight testing without a payload, the maximum groundspeed the Federal Aviation Administration permits for small unmanned aircraft under Part 107 without a waiver. The Company is in the process of obtaining FAA authorization to test at speeds above that limit.
“We did not stop at 100 mph because the aircraft ran out of margin. We stopped because the rulebook did,” said Jeffrey Low, Co-Founder and Chief Executive Officer of First Breach. “This is a platform that was flying tethered a few months ago. Today it is operating at the regulatory ceiling for its class, and we are working with the FAA to find out how much is left above it. For the defense customers we are building for, speed is survivability and mission tempo, and this airframe has both to spare.”
The 161 km/h (100 mph) result was achieved on the current prototype configuration, with no payload, and exceeds the 120 km/h (74 mph) maximum speed the Company published in its prior specifications for the platform. Hellbender has initiated the process of obtaining FAA waivers that would permit testing above that threshold and expects to characterize the platform’s full speed envelope once that authorization is in place.
“Range, payload, and the ability to fight through jamming are what win these programs, and speed is what makes each of those harder to stop,” said Jordan Low, Co-Founder, President and Chief Operating Officer of First Breach. “Together with Hellbender, we have built a platform that outruns most of what is flying in its class and simple enough to produce at the rate the Department of War is asking for. The FAA waiver process runs in parallel with the production ramp. Neither waits on the other.”
The Company continues to target completion of its initial prototypes in the fourth quarter of 2026 and the start of scaled production in the second quarter of 2027, with a targeted production capacity of more than 2,500 drones per week as manufacturing operations expand.
About First Breach
First Breach Inc. is an ISO 9001:2015 certified, American-made defense technologies company focused on manufacturing match-grade ammunition components, finished ammunition, and developing next-generation unmanned aerial systems for commercial, law enforcement, and military markets. The Company manufactures its products in-house at its Hagerstown, Maryland facility, where it produces brass cups, casings, projectiles, lead cores, lead wire, and completed ammunition with rigorous quality control standards. First Breach is also advancing its drone strategy through the development of U.S.-made unmanned systems, leveraging advanced engineering, robotics, ISR and sensor technologies, and precision manufacturing capabilities to address evolving defense, homeland security, law enforcement, and commercial requirements across domestic and international markets.
For more information, please visit: First Breach Inc.
About Hellbender
Hellbender, Inc. is a Pittsburgh-based engineering and advanced manufacturing company specializing in physical AI, computer vision, drones, robotics, electronics design, and automated manufacturing. Operating from approximately 90,000 square feet of facilities, the company provides integrated product development capabilities spanning engineering, prototyping, printed circuit board assembly, advanced sensor integration, robotic manufacturing, and production testing. More than 25% of Hellbender’s workforce consists of military veterans, supporting its commitment to American manufacturing and technical innovation.
For more information, please visit: Hellbender
Cautionary Note Regarding Forward-Looking Statements
This press release contains forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995. Forward-looking statements are not historical facts and include statements regarding the Company’s expectations, beliefs, plans, objectives, strategies, future events, future performance, business prospects, growth initiatives, acquisitions, market opportunities, capital resources, operational objectives, and other statements that are predictive in nature. Forward-looking statements may be identified by the use of words such as “anticipate,” “believe,” “continue,” “could,” “estimate,” “expect,” “forecast,” “intend,” “may,” “plan,” “potential,” “predict,” “project,” “seek,” “should,” “target,” “will,” “would,” and similar expressions, although not all forward-looking statements contain these identifying words.
Forward-looking statements are based on management’s current expectations, assumptions, and beliefs regarding future developments and their potential effect on the Company. These statements are not guarantees of future performance and involve known and unknown risks, uncertainties, assumptions, and other factors that may cause actual results, performance, or achievements to differ materially from those expressed or implied by such forward-looking statements.
Factors that could cause actual results to differ materially from those expressed or implied by forward-looking statements include, but are not limited to, changes in economic, business, market, competitive, regulatory, technological, legal, and geopolitical conditions; the Company’s ability to execute its business strategy; access to capital and financing; customer demand; industry developments; and other risks and uncertainties described from time to time in the Company’s filings with the U.S. Securities and Exchange Commission, which are available for review at www.sec.gov.
Readers are cautioned not to place undue reliance on forward-looking statements, which speak only as of the date they are made. Except as required by applicable law, the Company undertakes no obligation to update, revise, or publicly disclose any revisions to any forward-looking statements to reflect events, circumstances, or changes in expectations occurring after the date of this press release.
Investor Relations
Frank Pogubila
Partner
Integrous Communications
Phone: 951.946.5288
Email: fpogubila@integcom.us
Website: www.firstbreach.com
For additional company updates, follow First Breach on LinkedIn, X, and Facebook.