First Breach, Inc 8-K, filed Oct 28, 2026
First Breach, Inc. (FBDT)
About this 8-K
First Breach, Inc filed this 8-K on October 28, 2026, reporting on events of October 23, 2026.
First Breach terminated its ideaForge UAV joint venture, eliminating its up to $25.0 million capital commitment, including a $10.0 million tranche scheduled for December 31, 2026. It also reported a successful initial test flight of the Long Range Strike platform. AI summary
Items reported
- Item 1.02: Ended a material agreement
- Item 7.01: Regulation FD disclosure
- Item 9.01: Financial statements and exhibits
UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549
FORM
CURRENT REPORT
PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
Date of report (Date of earliest event reported):
(Exact Name of Registrant as Specified in Its Charter)
(State or Other Jurisdiction of Incorporation)
(Commission File Number) |
(IRS Employer Identification No.) |
| (Address of Principal Executive Offices) | (Zip Code) |
(Registrant’s Telephone Number, Including Area Code)
N/A
(Former Name or Former Address, if Changed Since Last Report)
Check the appropriate box below if the Form 8-K filing is intended to simultaneously satisfy the filing obligation of the registrant under any of the following provisions (see General Instruction A.2. below):
| Written communications pursuant to Rule 425 under the Securities Act (17 CFR 230.425) | |
| Soliciting material pursuant to Rule 14a-12 under the Exchange Act (17 CFR 240.14a-12) | |
| Pre-commencement communications pursuant to Rule 14d-2(b) under the Exchange Act (17 CFR 240.14d-2(b)) | |
| Pre-commencement communications pursuant to Rule 13e-4(c) under the Exchange Act (17 CFR 240.13e-4(c)) |
Securities registered pursuant to Section 12(b) of the Act:
| Title of each class | Trading Symbols | Name of each exchange on which registered | ||
Indicate by check mark whether the registrant is an emerging growth company as defined in Rule 405 of the Securities Act of 1933 (17 CFR §230.405) or Rule 12b-2 of the Securities Exchange Act of 1934 (17 CFR §240.12b-2).
Emerging
growth company
If
an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying
with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act.
Item 1.02. Termination of a Material Definitive Agreement.
As previously disclosed, on September 23, 2025, First Breach Inc. (the “Company”) entered into that certain Joint Venture Agreement, as amended on March 11, 2026 (as amended, the “JV Agreement”), by and between the Company and ideaForge Technology Inc., a Texas corporation (“ideaForge”), pursuant to which the Company and ideaForge agreed to enter into a joint venture to jointly undertake the business of licensing, sourcing, designing, engineering, manufacturing and distributing unmanned aerial vehicles (“UAVs”) in the United States.
Pursuant to the JV Agreement, the Company had agreed, subject to the closing of the joint venture, to make an initial capital contribution to the joint venture of up to $25.0 million, including a first tranche of $10.0 million to be funded on December 31, 2026.
On October 26, 2026 (the “Effective Date”), the Company and ideaForge entered into a Termination Agreement (the “Termination Agreement”) pursuant to which the parties agreed to mutually terminate the JV Agreement immediately as of the Effective Date. As a result of the termination, the Company has no further obligation to make any capital contribution to the joint venture, including the $10.0 million first tranche previously scheduled to be funded on December 31, 2026. Additionally, pursuant to the Termination Agreement, each party released the other from all claims arising out of or relating to the JV Agreement. The Company did not incur any early termination penalties in connection with the termination. Certain customary provisions of the JV Agreement survive termination, including those relating to confidentiality, governing law and dispute resolution.
The Company intends to continue the manufacture of unmanned aerial systems in its own factory and advancing its unmanned aerial systems program with Hellbender, Inc. further to its previously disclosed agreement with that company.
The foregoing description of the JV Agreement and the Termination Agreement does not purport to be complete and is qualified in its entirety by reference to the full text of the JV Agreement and the Amending Agreement to the Joint Venture Agreement, previously filed as Exhibits 10.3 and 10.5, respectively, to the Company’s Registration Statement on Form S-1 (File No. 333-295442) filed with the U.S. Securities and Exchange Commission on May 27, 2026, and the Termination Agreement, filed as Exhibit 10.1 to this Current Report on Form 8-K, each of which is incorporated herein by reference.
Item 7.01. Regulation FD Disclosure.
On October 27, 2026, the Company issued a press release announcing the successful initial test flight of its Long Range Strike platform, the second of the two proprietary drone platforms under development with Hellbender, Inc. A copy of the press release is furnished as Exhibit 99.1 to this Current Report on Form 8-K.
The information in this Item 7.01 and Exhibit 99.1 furnished hereto shall not be deemed “filed” for purposes of Section 18 of the Securities Exchange Act of 1934, as amended (the “Exchange Act”), or otherwise subject to the liabilities of that section, nor shall it be deemed incorporated by reference in any filing under the Securities Act of 1933, as amended, or the Exchange Act, except as expressly set forth by specific reference in such a filing.
Item 9.01. Financial Statements and Exhibits.
| (d) | Exhibits |
| Exhibit No. | Description | |
| 10.1† | Termination Agreement, dated October 23, 2026, by and between the Company and ideaForge | |
| 99.1 | Press Release, dated October 27, 2026 | |
| 104 | Cover Page Interactive Data File (embedded within the Inline XBRL document) |
† The Company has omitted portions of the referenced exhibit pursuant to Item 601(b)(10)(iv) of Regulation S-K because it (a) is not material and (b) is the type of information that the Company both customarily and actually treats as private and confidential. The Company hereby agrees to furnish supplementally the omitted information to the SEC upon request.
| 2 |
SIGNATURES
Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned hereunto duly authorized.
| Dated: October 28, 2026 | First Breach Inc. | |
| By: | /s/ Jeffrey Low | |
| Name: | Jeffrey Low | |
| Title: | Chief Executive Officer | |
| 3 |
Exhibit 10.1
TERMINATION AGREEMENT
BY AND BETWEEN
IDEAFORGE TECHNOLOGY INC.
AND
FIRST BREACH INC.
Spice Route Legal Privileged and Confidential |
October 20, 2026 |
TERMINATION AGREEMENT
This termination agreement (“Agreement”) is entered into on 23rd day of October, 2026 (“Execution Date”) by and between:
| 1. | IDEAFORGE TECHNOLOGY INC., a Texas corporation incorporated under the laws of Texas, United States of America, and having its registered office at 5900 Balcones Drive STE 100, Austin, Texas 78731 (hereinafter referred to as “IF”, which expression shall, unless repugnant to the context or meaning thereof, be deemed to mean and include its Affiliates, successors-in-interest and permitted assigns); |
AND
| 2. | FIRST BREACH INC., a Delaware corporation incorporated under the laws of Delaware, United States of America, and having its registered office at 18450 Showalter Road Bay 1 Hagerstown, Maryland 21742 (hereinafter referred to as “FB”, which expression shall, unless repugnant to the context or meaning thereof, be deemed to mean and include its Affiliates, successors-in-interest and permitted assigns)). |
IF and FB are hereinafter referred to individually as a “Party” and collectively as the “Parties”, as the context may require.
WHEREAS:
| A. | The Parties executed a joint venture agreement dated September 23, 2025 (“JV Agreement”) to jointly undertake the Business (as defined in the JV Agreement) through a C Corporation proposed to be incorporated under the laws of Delaware in the name “First Forge Technology Inc.” (“JV”). |
| B. | The Parties subsequently executed an amendment to the JV Agreement dated March 11, 2026, (“Amendment Agreement”) to amend certain provisions of the JV Agreement. The JV Agreement and the Amendment Agreement are collectively referred to as the “Existing Agreements”. |
| C. | Pursuant to the email dated October 06 2026 from FB to IF (“Termination Email”), a copy of which is attached as Annexure A of this Agreement, the Parties have now agreed to terminate the Existing Agreements, along with any rights, obligations and interests thereto, on and with effect from the Execution Date. |
NOW THEREFORE IT IS AGREED TO BETWEEN THE PARTIES AS FOLLOWS:
| 1. | DEFINITIONS AND INTERPRETATIONS |
| 1.1 | Notwithstanding the termination of the Existing Agreements on and from the Execution Date, capitalized terms and expressions used but not defined herein shall have the meanings ascribed to such terms and expressions under the Existing Agreements. |
| 2 |
Spice Route Legal Privileged and Confidential |
October 20, 2026 |
| 1.2 | The rules of interpretation set out in Part B of Schedule I of the JV Agreement shall apply mutatis mutandis to this Agreement. |
| 2. | On and with effect from the Execution Date, the Parties acknowledge and agree that: |
| 2.1 | The Existing Agreements shall stand terminated in accordance with (a) Clause 15.2.1 on account of Closing (as defined in the JV Agreement) not having occurred prior to the expiry of the Long Stop Date (as defined in the JV Agreement) and (b) Clause 15.2.2 of the JV Agreement, by mutual agreement in writing by the Parties; |
| 2.2 | Notwithstanding anything to the contrary contained in the Existing Agreements, the provisions of this Agreement shall prevail over the provisions of the Existing Agreements; and |
| 2.3 | Each of the Parties hereto confirm that: (i) it has no claims, rights or rights of action against the other Party hereto and/ or each of their respective former, current or future officers, directors, partners, present and future members, managers, trustees, representatives, employees, principals, agents, predecessors, successors, assigns, beneficiaries, heirs, executors, personal or legal representatives, insurers, affiliates, successors, and attorneys or any of them (each a “Releasee”); (ii) it has not filed or made any claims, actions, complaints, lawsuits, administrative complaints or charges relating to or in connection with the Existing Agreements; and (iii) it irrevocably and unconditionally waives and relinquishes any and all claims, rights or rights of action against any Releasee, in each case, in relation to all matters arising out of, or in connection with or relating to the Existing Agreements. |
| 3. | The foregoing waivers and releases set out in Clause 2.3 of this Agreement shall not apply to the breaches of this Agreement and any other agreements that the Parties may enter into following this Agreement. |
| 4. | REPRESENTATIONS AND WARRANTIES |
| 4.1 | Each of the Parties hereby makes the following representations and warranties (with respect to itself) on the date hereof to and in favour of the other Party: |
| (a) | It is validly existing under the law of its incorporation and has all necessary power, authority and capacity to enter into, deliver and perform this Agreement. |
| (b) | This Agreement, when delivered by it, will constitute its legal, valid and binding obligation, enforceable against it, in accordance with its terms. |
| 3 |
Spice Route Legal Privileged and Confidential |
October 20, 2026 |
| 5. | CONFIDENTIALITY |
| 5.1 | Subject to Clauses 5.2 and 5.3 below, each receiving Party acknowledges that any Confidential Information (as defined in the JV Agreement) of the disclosing Party that it has received or had access to shall remain subject to its confidentiality obligations, and that the termination of the Existing Agreements shall not release either Party from its obligations in relation to such Confidential Information, which shall continue in accordance with Clause 17 of the JV Agreement. |
| 5.2 | Return or destruction: Within 7 (Seven) days from the Execution Date (and, in respect of any Confidential Information subsequently identified or requested, within 7 (Seven) days of such identification or request), each receiving Party shall: |
| (a) | return to the disclosing Party or destroy, at the disclosing Party’s sole discretion (as notified in writing), all Confidential Information in its or their possession, custody or control, in whatever form or medium they may be held; |
| (b) | permanently and irretrievably delete all Confidential Information held in electronic form from all systems, devices, email accounts, servers, cloud storage, back-up and archival media, document management platforms and data rooms; |
| (c) | destroy all notes, analyses, summaries, compilations and other Confidential Information prepared by or for it, which contain, reflect or are derived from the Confidential Information of the disclosing Party; and |
| (d) | ensure that no copy, extract, summary or reproduction of any Confidential Information, in whole or in part and in any form or medium, is retained by it or any of them. Provided that, the receiving Party shall not be required to destroy Confidential Information which it is required to retain under Applicable Law (as defined in the JV Agreement), in which case such Party shall promptly notify the disclosing Party of the Confidential Information so retained and the legal requirement, and such retained Confidential Information shall continue to be subject to this Agreement for so long as they are retained. |
| 5.3 | Obligations of the receiving Party: Each receiving Party, shall, in respect of any Confidential Information which by its nature, is not capable of being returned or destroyed in accordance with Clause 5.2 of this Agreement: |
| (a) | safeguard the Confidential Information from unauthorised use, access or disclosure using at least the same degree of care that it uses to protect its own information of a similar nature, which in no event shall be less than a reasonable standard of care and in accordance with Applicable Law; |
| 4 |
Spice Route Legal Privileged and Confidential |
October 20, 2026 |
| (b) | not disclose the Confidential Information to any third party without obtaining the prior written consent of the disclosing Party; |
| (c) | limit access to the Confidential Information to those of its personnel who strictly need to know it for the purpose of complying with this Clause 5, and who are subject to confidentiality obligations no less restrictive than those imposed under this Agreement; |
| (d) | not make any copies of any Confidential Information without obtaining the prior written consent of the disclosing Party; |
| (e) | not use any Confidential Information for any purpose whatsoever, including for its own benefit or the benefit of any third party, or in connection with the design, development, manufacture, sourcing, marketing or sale of any product or service; and |
| (f) | promptly notify the disclosing Party on the occurrence of any unauthorised access, disclosure or misappropriation of any of the Confidential Information, and provide assistance to the disclosing Party as may be required, at its own cost. |
| 6. | Intellectual Property: Each Party shall retain all right, title and interest in and to its own Intellectual Property (as defined in the JV Agreement), whether owned, developed or licensed by it, prior to or during the term of the Existing Agreements. Nothing in the Existing Agreements or this Agreement shall operate to assign, Transfer (as defined in the JV Agreement), or grant to the other Party (whether expressly, by implication or otherwise) any right, title, interest or license in or to such Intellectual Property and no Transfer or license of Intellectual Property shall be deemed to have occurred under the Existing Agreements or any Proposed Agreements (as defined in the JV Agreement). |
| 7. | Notice: Unless otherwise provided herein, all notices, demands, claims or other communications to be provided hereunder will be in writing and delivered by: (a) courier, registered or speed post, or (b) email to the Party due to receive the notice and signed by or on behalf of the Party providing it. |
The address referred to above are:
| (i) | IF |
Address: 5900 Balcones Drive STE 100, Austin, Texas 78731
Attention: Amit Shrishrimal, Officer – Finance
E-mail: [***]
| 5 |
Spice Route Legal Privileged and Confidential |
October 20, 2026 |
| (ii) | FB |
Address: 18450 Showalter Road Bay 1, Hagerstown, Maryland 21742
Attention: Jeffrey Low, CEO
E-mail: [***]
Any notice or other communication shall be deemed to have been given: (i) if delivered, on the date of such delivery; and (ii) if sent by email transmission, on the same day if transmitted before 5.00 p.m., or the next day.
| 8. | Entire Agreement: This Agreement constitutes the entire understanding between the Parties with respect to the subject matter hereof and shall supersede all prior agreements or arrangements whether oral or written between the Parties and no variation of this Agreement shall be effective unless reduced into writing and signed by and on behalf of each Party. |
| 9. | Amendments: No change, modification, or termination of any of the terms, provisions, or conditions of this Agreement will be effective unless made in writing and signed by all signatories to this Agreement. |
| 10. | Survival: Notwithstanding the termination of the Existing Agreements, the following provisions of the JV Agreement shall survive the termination of the Existing Agreements and shall continue in full force and effect: Clause 1 (Definitions and Interpretations) (to the extent applicable); Clause 15.4 (Survival), Clause 17 (Confidentiality); Clause 18 (Governing Law); Clause 19 (Dispute Resolution); and Clause 20 (Miscellaneous). The Parties hereby agree that, notwithstanding Clause 15.4 of the JV Agreement, Clause 16 (Non-compete and Non-Solicit) of the JV Agreement shall not survive the termination of the Existing Agreements. |
| 11. | Notwithstanding the termination of the Existing Agreements being effective from the Execution Date, the provisions of Clause 17 (Confidentiality), Clause 18 (Governing Law), Clause 19 (Dispute Resolution), Clause 20.3 (Waiver), Clause 20.4 (Severability), 20.6 (Independent Contractors), Clause 20.7 (Further Actions), 20.8 (Exercise of Rights), Clause 20.9 (Remedies), Clause 20.10 (Costs and Taxes) and Clause 20.12 (Counterparts) of the JV Agreement shall apply mutatis mutandis to this Agreement and are herein incorporated by reference, as if set out in full herein, with references to the “Agreement” and the “JV Parties” being read as references to this Agreement and the Parties, respectively. |
[Annexure to follow]
| 6 |
Spice Route Legal Privileged and Confidential |
October 20, 2026 |
Annexure A
Termination Email
[***]
| 7 |
Spice Route Legal Privileged and Confidential |
October 20, 2026 |
IN WITNESS WHEREOF, each of the aforenamed Parties has signed and executed this Termination Agreement, on the date first above written.
For and on behalf of IDEAFORGE TECHNOLOGY INC.
| /s/ Ankit Mehta | ||
| Name: | [Ankit Mehta] | |
| Title: | [Director] |
Signature Page to the Termination Agreement executed between IdeaForge Technology Inc. and First Breach Inc.
| 8 |
Spice Route Legal Privileged and Confidential |
October 20, 2026 |
IN WITNESS WHEREOF, each of the aforenamed Parties has signed and executed this Termination Agreement, on the date first above written.
For and on behalf of FIRST BREACH INC.
| /s/ Jeffrey Low | ||
| Name: | [Jeffrey Low] | |
| Title: | [Chief Executive Officer] |
Signature Page to the Termination Agreement executed between IdeaForge Technology Inc. and First Breach Inc.
| 9 |
Exhibit 99.1

First Breach Completes First Test Flight of Long Range Strike Drone
Larger of the Company’s two Class 1 attritable platforms takes to the air, joining the Close Quarters Strike platform already in-flight testing.
Long Range Strike platform is designed for greater than 20 km range, ~ 1 kg payload, and fully non-Chinese sourcing of all key electronic and power components, with production scaling targeted for Q2 2027
HAGERSTOWN, MD / October 27, 2026 / First Breach Inc. (NASDAQ:FBDT) (“First Breach” or the “Company”), an American-made defense technologies company focused on vertically integrated ammunition production and next-generation unmanned aerial systems, today announced the successful initial test flight of its Long Range Strike (“LRS”) platform, the second of the two proprietary drone platforms under development with Hellbender, Inc. Both the LRS and the Company’s Close Quarters Strike (“CQS”) platform are now in active flight testing.

Close Quarters Strike and Long Range Strike platforms
“Having both platforms in flight testing is an important step in expanding our drone product portfolio,” said Jeffrey Low, Co-Founder and Chief Executive Officer of First Breach. “These two aircraft share components, share a supply chain, and share a production line. That was the plan from the first day of the Hellbender agreement, and today both of them are flying. For the long-range mission, this is the platform the Department of War has been describing, built the way they have asked for it to be built.”
The LRS is a compact, man-portable Class 1 unmanned aircraft system weighing under 9 kg (20 lb.), with propellers under 457 mm (18 in) and a wheelbase or folded wingspan under 350 mm. The platform is designed for a range in excess of 20 km, a current speed of approximately 120 km/h, and a payload of ~1 kg. Operators control the aircraft in first-person view, with computer vision search assistance layered over map-based waypoint navigation. Onboard hardware is intended to support identification friend or foe and terminal guidance, while modular radio connectivity and GNSS-denied navigation hardware are intended to support resilience in environments affected by electronic warfare. Designed from inception for high-volume robotic assembly, the LRS sourcing plan calls for 100 percent non-Chinese sourcing of its battery pack, motors, power electronics, flight control system, flight computer, and vision guidance system.
The milestone advances First Breach’s development of two distinct products built around common components, a shared supply chain, and a common production line. This approach is intended to support manufacturing efficiency and scalable assembly as the Company progresses toward commercialization. First Breach continues to target completion of its initial prototypes in the fourth quarter of 2026 and the start of scaled production in the second quarter of 2027.
About First Breach
First Breach Inc. is an ISO 9001:2015 certified, American-made defense technologies company focused on manufacturing match-grade ammunition components, finished ammunition, and developing next-generation unmanned aerial systems for commercial, law enforcement, and military markets. The Company manufactures its products in-house at its Hagerstown, Maryland facility, where it produces brass cups, casings, projectiles, lead cores, lead wire, and completed ammunition with rigorous quality control standards. First Breach is also advancing its drone strategy through the development of U.S.-made unmanned systems, leveraging advanced engineering, robotics, ISR and sensor technologies, and precision manufacturing capabilities to address evolving defense, homeland security, law enforcement, and commercial requirements across domestic and international markets.
For more information, please visit: First Breach Inc.
About Hellbender
Hellbender, Inc. is a Pittsburgh-based engineering and advanced manufacturing company specializing in physical AI, computer vision, drones, robotics, electronics design, and automated manufacturing. Operating from approximately 90,000 square feet of facilities, the company provides integrated product development capabilities spanning engineering, prototyping, printed circuit board assembly, advanced sensor integration, robotic manufacturing, and production testing. More than 25% of Hellbender’s workforce consists of military veterans, supporting its commitment to American manufacturing and technical innovation.
For more information, please visit: Hellbender
Cautionary Note Regarding Forward-Looking Statements
This press release contains forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995. Forward-looking statements are not historical facts and include statements regarding the Company’s expectations, beliefs, plans, objectives, strategies, future events, future performance, business prospects, growth initiatives, acquisitions, market opportunities, capital resources, operational objectives, and other statements that are predictive in nature. Forward-looking statements may be identified by the use of words such as “anticipate,” “believe,” “continue,” “could,” “estimate,” “expect,” “forecast,” “intend,” “may,” “plan,” “potential,” “predict,” “project,” “seek,” “should,” “target,” “will,” “would,” and similar expressions, although not all forward-looking statements contain these identifying words.
Forward-looking statements are based on management’s current expectations, assumptions, and beliefs regarding future developments and their potential effect on the Company. These statements are not guarantees of future performance and involve known and unknown risks, uncertainties, assumptions, and other factors that may cause actual results, performance, or achievements to differ materially from those expressed or implied by such forward-looking statements.
Factors that could cause actual results to differ materially from those expressed or implied by forward-looking statements include, but are not limited to, changes in economic, business, market, competitive, regulatory, technological, legal, and geopolitical conditions; the Company’s ability to execute its business strategy; access to capital and financing; customer demand; industry developments; and other risks and uncertainties described from time to time in the Company’s filings with the U.S. Securities and Exchange Commission, which are available for review at www.sec.gov.
Readers are cautioned not to place undue reliance on forward-looking statements, which speak only as of the date they are made. Except as required by applicable law, the Company undertakes no obligation to update, revise, or publicly disclose any revisions to any forward-looking statements to reflect events, circumstances, or changes in expectations occurring after the date of this press release.
Investor Relations
Frank
Pogubila
Partner
Integrous Communications
Phone: 951.946.5288
Email: fpogubila@integcom.us
Website: www.firstbreach.com
For additional company updates, follow First Breach on LinkedIn, X, and Facebook.