Hello, and thank you for joining us for Hylion's first quarter 2026 earnings call. On our last call, we had said 2026 would be the year we shifted from development to deployment of the Carno Power Module. The first quarter delivered tangible progress against that plan. We successfully completed the UL Certification Non-Recurring Tests milestone for the Carno Power Module. We signed a new data center partnership with BFG Holdings, broadened our military engagement, and further demonstrated multi-fuel flexibility. We also saw a significant increase in revenue growth, recording $2.8 million this quarter, a four-fold increase from the prior quarter. This growth reflects the accelerating pace of work with the military. Today, I'll walk through each of these areas in more detail, then turn the call over to John for the financial update. Starting with UL Certification, this was a high-priority milestone for us, and I am pleased to share that we successfully passed the UL Certification non-recurring tests for the Carno Power module. This is the gating item we discussed last quarter, and clearing it now enables us to begin delivering early adopter units to customer sites. To frame what this means going forward, each individual power module will still undergo a final operating test prior to receiving its nameplate certification, but the foundational testing we have completed does not need to be repeated. As a reminder, this testing covers the electric motor, battery system, and the complete power module, with each subsystem undergoing separate UL certification. As we continue working towards our full 200-kilowatt design power rating, we expect to move to facility-level certification, after which we will no longer need to certify each unit independently. That progression is an important step towards enabling production at scale. Turning to deployments. We We continue to operate Carno units at our Cincinnati facility while building additional systems. We remain on track to complete the approximately 10 early adopter units this year, ahead of commercialization, which we expect around year-end, depending on the timing of the early deployments. With UL non-recurring testing now complete, we are beginning to work with customers to move these systems to their sites. This is an important transition. Until now, customer units have been operating at our facility under controlled conditions. Over the next couple of quarters, we expect these same units to begin operating in real-world customer environments. We continue to see strong interest from the military in deploying our Carnot technology. We are now in active discussions not only with the Navy and Air Force, but with additional branches of the U.S. military as well. This interest is being driven by the platform's differentiated capabilities, including true fuel agnostic operations, low maintenance requirements, and low acoustic and thermal signature, which are particularly important for applications such as autonomous operations and mobile power generation. We continue to expect to sign $40 to $50 million of additional military contracts this year on top of the approximately $20 million in ONR contracts we are currently executing. We are also seeing strong and growing demand from data center customers. The need for on-site fuel-flexible power generation is becoming increasingly important, and we are actively engaging with the leading players in the market. In that context, I am pleased to announce a new strategic partnership with VFG Holdings. Hyliion and VFG Holdings have executed a non-binding letter of intent to deploy up to 250 Karno cores, or approximately 50 megawatts of power, over the next five years. VFG is a developer of advanced next-generation data centers and offers turnkey solutions including power, infrastructure, compute, and financing. The team at VFG is comprised of industry veterans from some of the largest data center companies and is planning multiple gigawatts of power production in the years ahead. Under this partnership, the parties plan to deploy Carnot power modules at VFG data center sites to demonstrate the unique benefits of the Carnot platform, including lower-than-grid electricity production costs, true fuel-agnostic operations, and direct 800-volt DC integration. We plan to share more details on the partnership in the periods ahead. The LOI between Hylion and BFG is subject to the execution of a definitive purchase agreement. Building on our partnership with ABM Industries, which we announced in early 2026, we have been engaging prospective customers alongside ABM. The opportunities span light and heavy commercial applications from single unit 200 kilowatt deployments to multi-megawatt installations. ABM brings deep capabilities in site engineering, integration, construction, and ongoing site management, which complements our focus on advancing and commercializing the Carno power module. Now shifting to updates on our product development, we continue to make progress towards our full 200 kilowatt design power rating. During the quarter, the team conducted isolated testing on new software and component improvements that yielded additional power and efficiency gains. We plan to incorporate these and other advancements into the product over the coming quarters and remain on track to reach the full design power rating by year end. Beyond the broader fuel flexibility we have previously demonstrated, the first quarter included a particularly meaningful product development milestone. We successfully demonstrated dynamic fuel switching within the Carnot reactor across diesel, natural gas, and hydrogen without shutting the system down. Said differently, the system can operate on both gaseous and liquid fuels with very different characteristics. This achievement validates true fuel flexibility on the platform, not just dual fuel, but the ability to operate on liquid fuel, pipeline gas, and zero carbon fuel through a single architecture with the ability to transition seamlessly between them during operations. The strategic significance of this capability is meaningful as many of our target applications desire this kind of flexibility. For example, data center operators often prefer pipeline natural gas as their primary fuel source while maintaining diesel fuel on-site as a backup in the event of a disruption in natural gas supply. The Carnot Power Module enables both within a single platform, eliminating the need for separate primary and backup generation systems this capability also expands our addressable market in defense applications where mission requirements frequently depend on fuel availability and the ability to adapt in real time with diesel fuel operation now demonstrated we have commenced building an 800 kilowatt carno power module for the u.s navy this system will be deployed on an unmanned Navy vessel as part of our existing ONR program. We expect to complete this build during 2026 alongside other Navy product performance and reliability milestones. Importantly, the 800 kilowatt system we are building for the Navy serves as the same architectural building block for our data center offering. By combining multiple 800 kilowatt units, we can scale to 1.6 megawatts, 2.4 megawatts, 3.2 megawatts, and higher, aligning with the modular power configurations required by data center customers. On manufacturing capacity, our focus today remains on building systems, establishing the supply chain to meet our quality requirements, and continuing to scale print capacity. We are continuing to make meaningful progress with our additive printers, particularly in improving part production speeds. We expect to install a few additional printers this year, and with those additions, our existing fleet is expected to support our planned production needs for 2026, 2027, and into 2028. We remain on track to take delivery of and begin testing one or more printers equipped with the latest laser technology from GE equilibrium later this year. We believe that technology has the potential to further improve print speed and throughput. On supply chain, we noted last quarter that magnet supply was a potential risk given export constraints from China. I'm pleased to share that during the first quarter, we began to see progress with alternate sourcing options for the high-strength magnets we require, increasing our confidence in our ability to support planned production to recap our 2026 milestones at the start of the year we outlined a clear set of objectives with one quarter complete we are making solid progress we have completed ul non-recurring testing on the carno power module we have demonstrated multi-fuel switching including liquid fuel operation and have begun building the 800 kilowatt navy system looking ahead we remain on track to achieve our full 200 kilowatt design power rating complete our remaining early adopter unit deployments secure 40 to 50 million dollars in additional military contracts and deliver approximately 10 million dollars of revenue for this year looking beyond this year our three-year outlook remains unchanged in 2027 we expect to ramp commercial deliveries and expand the range of Carnot deployments, specifically with the military and data center customers. We view 2027 as the year we transition from initial commercialization into meaningful production scale. By 2028 and beyond, we expect to accelerate commercial growth as production capacity enables us to serve a broader portion of customer demand, including expansion into multi-megawatt configurations for data center customers. With that, I'll turn the call over to John to walk through the financial results for the quarter.

Thank you, Thomas, and good morning, everyone. In the first quarter, we recorded revenue of $2.8 million from research and development services. This compares with revenue of about a half a million dollars in the first quarter of 2025 and $700,000 last quarter. The significant growth reflects an acceleration of work under our contracts with the Office of Naval Research. Cost of revenues was $2.6 million, resulting in a gross margin gain of $210,000. As a reminder, R&D services revenue with the Navy reflects the sale of carnal cores and systems, including the 800-kilowatt power module we are building, and the work we perform to test and validate these units. Operating expenses for the first quarter were $13.4 million, down from $19.7 million in the first quarter of 2025. The decrease was driven primarily by lower research and development spending. R&D spending in the first quarter was $7.7 million, down 37% from the $12.2 million we spent a year ago. While the absolute level of R&D spending was down compared to a year ago, most of the year-over-year decrease related to a shift to revenue-generating services for the Navy versus other research and development work. This shift included approximately $1.9 million in lower R&D expenses this quarter as we capitalized inventory and utilized less labor and materials performing R&D activities. This inventory is primarily work-in-process components that we expect to utilize in future periods for building carnal systems for the Navy. On the powertrain exit and termination expense line, we recorded a credit of $414,000 compared to an expense of $1.4 million in the first quarter last year. This credit reflects ongoing asset sales related to our former powertrain business during the quarter and is not expected to be recurring. SG&A costs were relatively flat, with an increase of $100,000 attributable to higher personnel expense partly offset by lower spending in other areas. Our total net loss in the first quarter was $11.7 million, down 32% from the $17.3 million loss we recorded in the first quarter of 2025. Turning to our cash and investment position, we spent $13 million during the first quarter. Capital spending was $1.9 million and consisted primarily of payments for additive printing machines along with some facility investments to support printer operations. Cash generated from asset sales for the quarter was $1.6 million. Asset sales related to the monetization of equipment previously used in our powertrain division and are largely complete. we finished the first quarter with 139.3 million dollars of cash and short and long-term investments on our balance sheet we are reaffirming our guidance for 2026 including approximately 10 million dollars in revenue this year from both r d services and possibly some commercial customer sales also as thomas noted we plan to slow capital spending in 2026 compared to 2025 as we work to optimize the output of the printers that we have on hand today we are planning to execute equipment financing for up to 10 million dollars later this year although that amount may shift up or down based on terms and availability of lease capital overall for 2026 higher revenue expense control lower capital spending and planned equipment financing are expected to result in a lower level of total spending compared to 2025. Our current forecast is for net spending of just over $50 million during the year, resulting in a year-end cash and investment balance of approximately $100 million. We continue to believe that the capital we have on hand today is sufficient to carry us through commercialization of the Carnal Power module. Also, we anticipate additional capital will eventually be required to support production growth, particularly for the purchase of additional additive manufacturing equipment to more rapidly ramp up production in future years. Now I'll turn the call back over to Thomas.

To wrap up, the first quarter delivered against the deployment and commercialization plan we outlined at the start of the year. We completed UL non-recurring testing, signed a meaningful data center partnership with VFG, and generated four times the revenue of the prior quarter. We also broadened our engagement across the U.S. military, demonstrated true multi-fuel flexibility, and commenced the build of our first 800-kilowatt Navy system. The themes we identified last quarter, namely the shift toward 800-volt DC architecture in next-generation AI data centers and the demand for resilient, mission-critical power across the U.S. military, became more tangible in the first quarter. The VFG partnership positions us within the next generation data center deployments, where 800 volt DC native operation is a clear architectural advantage, while expanding military engagements reflect strong demand for the platform's differentiated capabilities. For the remainder of 2026, our focus is execution, delivering the remaining early adopter units, completing the 800 kilowatt Navy system, securing 40 to 50 million dollars of additional military contracts, achieving full 200 kilowatt design power, and commercializing the Carno power module by year end. We are excited about the opportunity ahead and the position we are in to capitalize on it. I will now hand the call over to our moderator to open up for Q&A.

Your first question comes from edward jackson with northland please go ahead uh thanks good morning john good morning thomas good morning um congrats yeah congratulations on all the progress towards commercialization um i got a fluke a question for you i wanted to start out on you know some of the r d and contracting stuff around the navy so you had 12 million dollars i mean you have 20 million contract. You've got about $12 million of it left. You had a pretty big number for it this quarter. How do you think about how that seems like it's, you know, from your own conversation, like, you know, the activity around that contract is accelerating. So, can we expect similar kind of numbers in terms of print, you know, as we go through the remainder of this year against that contract and then kind of tying that into the $40 to 50 million additional military opportunity in front of you um you know what's the timing for you to um you know maybe bring some of that home in terms of contract and would it be fair to assume that uh given the progress you've had with the navy that the ability for you to you know kind of bring that revenue to the pml would be a little quicker you know because you you're you're building on a foundation that's already been laid. That's my first question or questions.

So, Ted, this is John. I'll try and answer that. So the first part was just about the $20 million in contracts that we have today and the pace of that revenue. So last year, I think we – last year and the year before, I think we booked somewhere around $5 million total, and so just under $3 million this quarter. It's a really good start to the year, especially on our forecast of $10 million. we do expect that strength to continue and it's really been a matter of us getting a lot of traction with that with that contract and and getting work done particularly around the 800 kilowatt power module that we talked about and then leading into later in the year you know we do expect to sign additional contracts as you mentioned somewhere between 40 and 50 million and that'll be a second half of the year expectation in terms of when those get signed. And so that will allow us to continue that momentum into the fourth quarter and into 2027. So we feel very good about our military opportunities. I think that's one thing Thomas was really trying to emphasize during his prepared remarks today is we do see the military as a huge opportunity and we are starting now get some big traction on the revenue side. So you should expect that to continue to grow.

Okay. And then my next question, and then I have more of it, I'll step aside and not be a hog, is on the efforts to get to the certification for 200 kilowatts. I know it's kind of like a lack of moments you kind of go through and make different changes. But maybe you can talk a bit about, you know, what you've accomplished towards that in during the first quarter and, you know, where we stand in the current second quarter and what we need to finish to get to that, you know, 200 kilowatt, you know, rate and be able to certify.

Yeah, happy to share more on that one. So maybe I'll start with where we were last quarter. We had shared that we have produced a gross of 175 kilowatts out of the dyno, and that was about three months ago. The focus over this quarter was around actually independently testing some advancements. And in great news, I mean, we were seeing double-digit kilowatts of improvement out of those independent tests that we were running. And so now what we'll work on over the next quarter, as well as the quarters ahead by year end, is rolling in those improvements. We've got other ones that we're working on as well that we'll be rolling in. But ultimately, it's all pointing towards we should be at that 200 kilowatts of power rating by the year end. One nice thing is with the UL testing that we've done, the non-recurring testing, even with improved power levels, we do not need to go back and redo any of that testing. So that's a big win, and it's just that isolated final test that happens on each system, which will have the power rating of it. So it's not like as we increase power, we need to go back and redo all of UL. So that puts us on a good trajectory to be, you know, going into next year, starting to scale production, get more units out there, and have them be at that higher power level.

Okay. I'll step out and get back in line for more questions next time.

Your next question comes from Martin Malloy with Johnson Rice. Please go ahead.

Good morning. Congratulations on your progress. My first question, good morning. I wanted to talk about the military applications and if with respect to the stationary power military applications, if we could see those, the testing and the move and the orders, could that be quicker than what you're seeing with the Navy. And then also on that, are you seeing any change in the interest from the U.S. military following the recent conflict in the Middle East?

Yeah, let me start with the first one of stationary power. So this Office of Navy Research or Naval Research contract that we have, we often talk about the on-ship platform and this 800 kilowatt. One thing that we probably underemphasize is that contract also has stationary deployments planned into it as well. And so that's something that, you know, as we go through this year into next year, we'll be working on those stationary deployments as well. We also, as, you know, John highlighted a little bit earlier, you know, the 40 to 50 million of additional military contracts, that is both for on-ship applications as well as stationary applications as well. So to your point, the stationary does have an accelerated factor to it where it really is just that commercial box that we've already been working on and developed that we'd be deploying. And then the military has plans to put it into hot weather environments, put it into very humid environments. They've got cold weather environments they're going to be operating it in. And so they're really looking to run it through its paces in order to ensure that it's suitable for any type of operation that they might need to be able to be producing power in. So then going into the second part of your question. About the conflict. Yeah, so around the conflict and is that accelerating, you know, the demand? And so what I would say is I think I would kind of look at it outside of the conflict itself. I would say that the interest from the military is just growing overall. Just over the last quarter, I've had a handful of meetings with various generals of both, you know, in the military. I was up at West Point just recently, was up at Fort Hood recently, and we're seeing that, you know, this product just touches a lot of the pain points they have, whether it's not knowing what fuel is going to be available. And so our system can run on various fuels, whether it be that they need a low heat signature, low noise profile, we deliver that. Also, just even the low maintenance. One of the generals expressed that where the military often struggles is in logistics and moving parts around and getting assets to where they're needed. And so if you can move to a lower maintenance system, a system that requires less parts, now you've improved the logistics of the military. So I think overall we're seeing a very fast growth in interest and demand out of the military, and I suspect that next year the military will be where we actually focus a lot of our deployments with them.

That's very helpful. And then for a follow-up question, I just wanted to focus on the commercial, non-military side and the placement of the Carnot generators this year. Can you maybe help us in how to think about the timetable for testing with the customers, how much time that they'll need before those pilot tests turn into orders? Is it a three-month testing process or six or nine months with these customers? And this is all, you know, assuming it works as expected.

The numbers you threw out were spot on. So we've got some that have said it's in the three-month. We've got some that have told us it's more than a nine-month time frame. But, you know, as we highlighted in today's call, we've got nearly 750 units of interest in LOI signed with various customers. And so what I envision happening is that this year we'll get some initial units out with various commercial customers, and then we'll start deploying initial units with other customers as well, and then we'll start layering in repeat orders from those first customers, but we'll also be deploying new units with new customers as well. And so I don't think, you know, backlog interest, that's not our issue. Our issue right now is how do we get these units out into the field? How do we start scaling production and hopefully, you know, deliver more units to customers next year, whether that be through repeat orders or through just a brand new opportunity? And, you know, I think next year we're going to be focusing heavily on both military, as I just mentioned, but then also the data center side of things. And we've been engaging with many of the key players in the data center space, and they're excited and eager to see our product. And they're doing trips up to our Cincinnati facility. We've had one this week. We've had multiple this week. We've got more next week visits happening with various data center players. And so I think that's going to be a long-term growth opportunity for us.

That's great. I'll turn it back.

Your next question comes from Sean Milligan with Needham and Company. Please go ahead.

Hey, Thomas. Great update today. You hit on the printer side and just the capacity you have for this year and next year. Curious about the human element in terms of the assembly, kind of what the plans are to scale up there, and do you see any headwinds on the assembly side?

You know, I guess personnel and then also maybe, like, changes you're making to the system to make it easier and quicker to assemble great question so we're working on all the above so maybe just walking you through the journey initially all the very first assemblies were happening and all the very first printing was all happening out of our cincinnati r d facility the first thing that we started to scale was printing and that's where we set up um we've probably got about 3x the print capacity in texas that we do in cincinnati now and you know we moved that to our larger facility here and built up the team around it over the last handful of months we also then moved power module assembly to texas so that was happening in ohio now it's happening here in texas the next stage of the journey will be moving the actual carnal core assembly to texas that's something that we've already started building out the team they're actually uh traveling to cincinnati learning how to build the system properly and then we'll move that operation here so i think we have a very good setup where we kind of go through the learnings the hurdles the development in our cincinnati facility that allows the the engineers to be alongside the assembly line and kind of educating and and iterating that process. And then once it's more stable, then we move it to Texas and it's more of a focus of let's start scaling and growing it. And to that point, as I mentioned, we've already started building out the team to work on that. So do feel confident the facility has the space and the infrastructure we need in order to scale. And we'll be hiring the team as we need it appropriately. And then we'll also be adding in parallel assembly lines as well, which is something we've already started exploring.

Awesome. And then you mentioned you're having a lot of conversations with data center customers today. Curious kind of what they see as the most unique or in-demand piece. Is it the 800-volt architecture? Is it the fuel agnostic? Just curious about what do you think they view as, like, the differentiator for Hylion?

Yeah, so first is they just need power. So I think any data center provider you talk to, if you had even an old used turbine sitting around, they would buy it right now. It is unbelievable the need for power that they have. And then outside of that, I mean, that's actually, you know, one of the things that they wish we had more of. They would love to have more capacity out of us. Obviously, we're just scaling up, as we've talked about. But so what they're seeing as unique about the Carno power module is, one, it truly enables behind the meter or on-site power generation. It's got very high efficiency for its form factor, as well as it's got very low maintenance. So those are exciting factors. And then the other things that you touched on, let's talk about fuel agnostic at first. So pipeline natural gas is going to be what data centers run on 99% of the time, but the reliability standards that the data centers are held to, pipeline natural gas doesn't actually meet those reliability metrics. So that then forces the data center to have fuel stored on-site as well. And normally in most data centers, the on-site fuel storage is diesel. And so what data centers are being forced to do right now is not only buy a set of natural gas generators, they also then have to go buy a set of diesel generators to be able to handle both those requirements. With the Carno power modules, you can run both of those fuels off of the same power module and have redundancy built in. So that's a big win. And then the last one that you highlighted, the 800-volt architecture. So just coincidentally had the opportunity to meet both Jensen Wong from NVIDIA this past weekend, as well as Lit Buton, the CEO of Intel, and that was discussions I had with both of them. They see 800-volt architecture as where the industry is heading. NVIDIA has been probably the most kind of, you know, progressive on that end of saying that this is where data centers are going to head. And so right now, you would normally have to convert the 480-volt AC power from the grid, convert that into DC to go into the racks, versus with the Carno power module, you can go straight 800-volt DC power out straight into the actual rack. So that's going to reduce your need for transformers. It's going to reduce your need for copper lines in the facility. And so it's just all around a better solution, more efficient solution.

That's great. Thank you for the update. today.

Your next question comes from Edward Jackson with Northland. Please go ahead.

Thank you very much. Coach Thomas, one way to talk about your pipeline and your growth prospects is you know that a year ago, your LOI covered 100 car notes, and now it's at 750. So that's in 12 months.

So, Scott, you might have missed yourself.

My follow-up questions were... I got that up there for you. My follow-up question for you is, you know, when you're moving towards commercialization and the data center opportunity, and, you know, we're talking roughly 10 units, you know, you had indicated earlier in the year that because of the data center opportunity and the evaluations and trials that you were really going to hold back, you know, call two or three units and just maybe be able to use them for demonstration you know with regards to this data center opportunity um you assigned a contract with the dfg or an loi with dfg which really expanded your um pipeline in terms of a backlog or whatever you want to call it in terms of um carnal units that are under lli is there any um tie in between those two or is are they mutually exclusive. And I guess, you know, where I'm going with it is, you know, given the relationship with DSD and what they do, I mean, is that, you know, where you are looking at perhaps putting, you know, some of these units where you're wanting to have them for data center, potential data center customers to, you know, kind of kick around? That's my first question.

Yeah, so I do see some overlap with those. You know, what we're envisioning with these couple of demonstration units. We're actually already in the process of, you know, one of them is going to be mounted on a trailer. It can be moved around from location to location. What we've seen is when people actually get a chance to see the product, you know, I'll kind of try to put a story to it. Like, you know, up in our Cincinnati facility, you walk out of the building, you can see the carnage there. You're maybe 30 feet away. You can't tell whether the product is on or off because of how quiet it is right it's not until you actually get closer to the system that then you can actually you know hear some of the fans running and that's not the experience that people normally have with a an internal combustion engine or turbine data centers are actually running into problems of neighbors complaining about how loud systems are and so when people get to experience the product see it firsthand you know see the how easy it is to operate and how simple it is. You truly just feed fuel in, and you're going to get electrons out. The product, in a lot of ways, sells itself. And so from that end, whether it's with VFG or other data centers, just yesterday another data center provider was in, and they were talking about let's take a system, put it in their AI test facility. All these data center providers have not only the true data centers they're building, They also have facilities where they're testing new technologies, new architectures like the 800 volts, and so they want to get systems deployed and really prove out the use cases we're talking about. So, as we go into 27, you know, as I mentioned, whether it's with VFG and or others, the plan will be to be showcasing some of those demonstrations.

Well, and having been to your facilities, I mean, I stood and had a full conversation with you, not like, I mean, literally right next to a unit, and we didn't have to yell. So, I mean, they are definitely – they aren't that loud. The next question is, you know, you're talking about 27 being the year of kind of ramp in 28 and that you have the capacity to handle, you know, what you view as your needs until you kind of get through 28. Can you perhaps, you know, give us some kind of sense with regards to what you think your, you know, your current capacity level is or, you know, some kind of range in terms of kind of what your capacity level will be in 27? I mean, I assume we're talking units and, you know, just it doesn't have to be exact. I mean, maybe kind of like a low and a high and just kind of, you know, frame out what we could think of in terms of your ability to produce the car mill.

Yeah, so I'll start with apologizing. We're not ready to share that just yet. We do anticipate later this year we'll start leaning in and share more on what we expect capacity for next year and the year after to be. But, you know, we obviously are expecting growth behind it. The reason that we don't want to lean in just yet and share those expected numbers is because we want to see how these initial units go when we get them out to customer sites. I mean, just being transparent, it would be naive for us to think that there won't be any learnings and it'll just be full steam ahead, right? I mean, there definitely will be learnings. Every new technology has it. And, you know, the question is going to be, what are they and how fast can we respond and adapt and, you know, and fix them? So our focus right now, let's get these approximately 10 early adopter units out there. Depending on how those are performing, that's what will then set what we expect production to be next year. But obviously, our goal is to accelerate it and get a good bit more units out there next year and so on in 2028. We're just not ready to actually put in numbers to that yet.

Well, I had to ask. My last question is when you think about your revenue, you know, there's kind of, you know, right now the revenue that you're putting out there is, you know, really coming. It's coming, you know, really from, you know, like development work for the military. At what point – and I know that there's, you know, there's actually condo units kind of within that. Is there – will that always be – will your revenue from the military as you move forward always kind of be in that sort of other revenue bucket? Or as you hit commercialization, will we see another revenue line that will have revenue for your commercial customers? And will your military revenue, or at least some portion of it, shift into that line?

Yeah, Ted, this is John. I'll take a shot at that. So I think it's more of the latter. Our initial contract with the Navy is more R&D. And if you can imagine a new ship platform, they're going to do a lot of R&D work before they put a new power source in that. But then, as Thomas was talking about, there's a lot of interest for mobile power, for example, in the Army and the Air Force. And those types of systems, they could initially be R&D, but those will certainly turn into some kind of commercial unit. So it won't all be R&D. I think from our standpoint, at least now, we're happy to have revenue on both lines. It is beneficial both ways and is a good signal of interest in the system and also us making progress and, you know, offering these types of R&D services to the military. So it should continue to grow in both areas.

And, Ted, just to add to that one, so last week we had a gentleman in from the military, and it's still on our whiteboard here in the conference room that we're all sitting in. And he walked us through the, how do you move from the R&D phase with the military into actually just being purchase orders that are being placed and how to effectively do that? So it's obviously something we're thinking about and do expect that it's long term. This isn't just R&D. This is just, we want it to be a product that they just purchase.

Yeah, that would be ideal. So, okay, well, thanks for taking all the questions and congrats again on the progress in the quarter.

Thank you. your next question comes from martin malloy with johnson rice please go ahead uh thank you i just had one quick follow-up question just regarding the ul testing does that clear the way for what you've done so far does that clear the way for placing the carnal units at the customer sites or is there some final certification that is needed yeah so we've done all the non-recurring tests and just a little more detail that's both on the linear electric motor the battery pack as well as then the full

power module the last thing that we need to do in order to put it at a customer's site is just go through a final run of the system, and then that will then put the nameplate on it for UL certification. So the way that UL structures this is until you get facility-level certification, every unit you produce still needs to go through a final end-of-line run. It does not need to redo all those reoccurring tests I mentioned. It's just a final end-of-line run and then that will will get the nameplate once later this year we move into the facility level certification then we no longer have to independently run every single system prior to nameplate being put on it so the way for you know you really look at this is you know we've hit those UL tests that were needed in order or we've successfully passed those UL tests that were needed in order to move to the next phase of customer sites and then each one that we build will just go through a final run prior to that nameplate being put on them.

Got it. Great. Thank you very much. Appreciate it.

We have reached the end of the Q&A session. I will now turn the call back to Thomas for closing remarks.

Thank you all for joining today's call. Hopefully you can see a lot of excitement on our end. A huge milestone for us to get through that UL certification testing. It's been something we've been talking about for a few quarters now. Obviously excited about the collaboration with DFG and moving the signed LOIs, non-binding LOIs to a potential of about $400 million of revenue at today's current pricing. And then, you know, we talked about a lot as well, the opportunities ahead of us with the military and excited to get those $40 to $50 million of contracts signed and executed and then, you know, be able to share a little bit more of what some of those opportunities are with all of you. So, once again, thanks for joining for this quarter, and we look forward to sharing more on the next earnings call.

This concludes today's call. Thank you for attending. You may now disconnect.