Good afternoon and thank you for joining today's Second Quarter 2023 Conference Call. As you read our earnings press release and as you listen to this conference call, please recognize that both contain forward-looking statements within the meaning of the federal securities laws. These forward-looking statements are subject to a number of risks and uncertainties, many of which are beyond our control and which could cause actual results to differ materially from such statements. These risks and uncertainties include those spelled out in our earnings press release, those described in our annual report on Form 10-K for fiscal 2022 and those described in subsequent filings with the SEC. You should consider all forward-looking statements in light of those and other risks and uncertainties. Additionally, we will be providing certain non-GAAP financial measures during this conference call. Our earnings press release and the financial supplement posted to our IR website each provide a reconciliation of these non-GAAP financial measures to their most comparable GAAP financial measures. On the call with me today are Jeff Andreson, our CEO; Larry Sparks, our retiring CFO; and Greg Swyt, our incoming CFO. Jeff will begin with an update on our business, and then Larry and Greg will provide additional details about our results. After the prepared remarks, we will open the line for questions. I'll now turn over the call to Jeff Andreson. Jeff?

Thank you, Claire, and welcome to our Q2 earnings call. Our second quarter results came in at the upper end of our expectations. Revenues were $185 million and declined less than expected, primarily due to the acceleration of customer demand for a couple of end markets that are recovering more quickly in the currently soft WFE environment. Our gross margin, operating expenses and operating profit performance also fell into the upper end of our guidance ranges. And with more favorable tax largely offsetting the higher interest expense, earnings of $0.02 per share also exceeded our prior expectations of a breakeven quarter. We continue to see the second quarter 2023 as Ichor's trough quarter during the current downturn, with modest sequential growth expected as we progress through the year. Our current expectations for the third quarter indicate revenue growth of about 4%, plus or minus, with the only difference compared to our prior outlook of 5% to 10% growth being the stronger second quarter. While our overall outlook for the full year is consistent with what we were seeing at this time last quarter, there was no question that there continues to be a significant amount of variability in customer demand to build schedules. For example, at the same time as Q2 witnessed a degree of demand from Q3, we also saw increased demand in a couple of pockets of strength, including increasing investments in the trailing node, logic and high-bandwidth memory. These areas of upside, however, are being pretty equally offset by softening demand in some areas of leading-edge logic and slower build schedules in other areas, such as EUV lithography. So while we are witnessing some improvement between the quarters, our overall outlook for 2023 is largely unchanged. However, the year is a bit more front half weighted than we previously thought given the stronger performance in Q2. Clearly, our expected revenue decline in 2023 is a good step in the overall market decline of 20% to 25% due to several factors. First is our relative customer exposure, which is more heavily weighted towards etch and deposition compared to lithography. We estimate that our customer shipments of etch and deposition systems would be down at least 30% this year. Furthermore, the component side of our business, which is largely comprised of weldment and precision machine parts and which typically represents about a quarter of our revenue, is seeing deeper cuts as our customers work to reduce their inventory levels. The bright spot for us this year are definitely within growing market segments and new customer design wins, and we continue to expect to add a third 10% customer for fiscal 2023. We are also less exposed to the memory market today than ever before. Based on our customers' revenues by end market, we estimate that memory WFE investments drove approximately 40% of our sales in 2022. And given the industry environment for memory year-to-date, we estimate our current exposure to be less than 25%. All of these factors, which certainly are resulting in a challenging year for Ichor in 2023, are just as strongly indicating the potential for a very strong snapback of demand as the industry recovery – for example, our outlook for the remainder of 2023 assumes little to no recovery in the memory sector, which is broadly expected to begin to rebound sometime next year given the recent stabilization in pricing and demand environment. Our business model and financial profile tend to generate significant operating leverage as revenues increase. For example, we estimate our gross margin flow-through to be approximately 25% as we move through the remainder of 2023 which, at the midpoint of Q3 guidance, will generate a 30% improvement in operating profit on a 4% increase in revenues. A more significant revenue ramp in 2024 could once again lead to very significant earnings growth as we look ahead, which is why we continue to make critical investments in our business in support of future growth. During this period, we are maintaining our focus on driving share gains for our proprietary product and making investments in new offerings that support our customers' long-term technology roadmaps. We are utilizing the slowdown to complete qualifications and new products that will both increase our share of our served markets as well as the internally manufactured content of our existing products. We continue to make good progress on all of our focus areas this year with new customer qualifications for our internally developed machining components, leveraging our global weldment footprint to gain additional share, qualifying our initial next-generation gas panels as well as our proprietary chemical delivery systems and the development of new components that address the wet processing market. I'd like to start with an update on our next-generation gas panel evaluations. We are now actively engaged with four customers. We have now completed the qualification of two of the evaluation units we shipped for two different applications. Our best estimate of when production shipments will begin is mid to late 2024 as they will now move into their customer evaluation stage. Additionally, we also expect to complete a third evaluation this quarter that will also lead to first production units in a similar timeframe as our tool is introduced into the market. These are important milestones for Ichor, and we are very pleased with the progress we are making with this new product. We have finalized the qualification of incremental machining components, and we'll begin initial shipments later this quarter. These components will be integrated into our existing gas panels that we manufacture today and will be margin accretive. The new gains in our chemical delivery business are progressing but at a slower pace than our gas delivery product. As a result, we are reviewing our Japan strategy to accelerate our results in this region. We are also developing new components for this market that we expect to begin to lease in 2024 as well. And lastly, we reported on our last earnings call that we have completed delivery and customer qualification of our first gas panels for the silicon carbide market and are now shipping production units. We continue to work closely with our initial customer and expect to deliver the first evaluation units to them for their next generation tools sometime in early Q4. In summary, I’ll remind everybody here today that our revenues tend to recover more sharply when industry spending rebounds and our business model enables earnings growth well in excess of revenue growth. In the meantime, we are managing through the lower demand environment by focusing on delivering solid financial results as the business recovers from Q2 levels, improving our operational capabilities, qualifying our internally developed products and developing new products that align with our customers' needs for both technology and costs. Before turning the call over to Larry, I’d like to share my sincere appreciation for his leadership of the finance organization and across the enterprise over the past four years and congratulate him on his elongated retirement. Both Larry and I trace our roots back to our many years at Applied Materials, which is where we also met Greg Swyt. In fact, Greg and I have worked together for the majority of our last 25 plus years in the business, so you might remember him from Nanometrics where he took over for me after I joined Ichor in 2017. Greg’s extensive experience in semiconductor equipment and his deep knowledge of Ichor’s finance and operations will make this transition very seamless. But we will all miss Larry. We also know we’re in great hands with Greg. With that, I’ll turn the call over to Larry to recap our Q2 results before closing with Greg to provide further details around our Q3 financial outlook. Larry?

Thank you, Jeff. I’ve really enjoyed my four years at Ichor and getting to know many of you in the investment community. First, I want to remind you that the P&L metrics discussed today are non-GAAP measures. These metrics exclude the effects of share-based compensation, amortization of acquired intangible assets, non-recurring charges, and discrete tax items and adjustments. There is a useful schedule summarizing our GAAP and non-GAAP financial results, which includes individual line items for non-GAAP operating expenses such as R&D and SG&A in the investor section of our website for reference during this call. Second quarter revenues were $185 million, near the upper end of our expectations, though down 18% from Q1. The gross margin of 14.5% met our expectations of a little under 20% flow-through on the revenue decline, compared to our model of a 25% incremental margin on increasing revenue. Operating expenses were $21.5 million, and due to the uptick in both revenue and gross margin, Q2 operating margin was above the midpoint of our guidance at 2.9%. Due to higher interest rates, net interest expense rose to $5 million. On the other hand, our non-GAAP net income tax benefit for the quarter was also slightly higher than anticipated at $500,000. Consequently, net earnings for the quarter were $0.02 per share. Our GAAP net loss included a non-cash $11 million valuation allowance on our U.S. deferred tax assets because our U.S. profits dipped into a cumulative three-year loss by the end of Q2. A significant portion of our fixed costs, like interest expense, M&A, amortization, and stock-based compensation, is in the U.S. and does not change with customer volume. As the industry rebounds and our U.S. revenue and profitability improve, we will reassess our valuation allowance needs. Now, regarding the balance sheet, cash and equivalents at the end of the quarter were $85 million, an increase of $16 million from Q2, while total debt decreased by $7 million. We generated $27 million in cash flow from operations, and after $4 million in CapEx, our free cash flow for the quarter was $23 million. As anticipated, working capital balances went down across the board due to the current soft demand environment. Accounts receivable decreased by [Technical Difficulty] million, and inventory dropped by over $5 million. Days Sales Outstanding declined slightly to 47, and inventory turns were at 2.4. Given the free cash flow generated in Q2, we chose to pay down part of our revolver, particularly due to the ongoing interest rate increases. Currently, we have $95 million available on our revolver and our net debt coverage ratio is about two times. Now, I’m happy to introduce Greg Swyt and hand the call over to him to discuss our Q3 guidance. Greg?

Thanks Larry, and thank you Jeff for the earlier introduction. It’s nice to know that many familiar names from my Nanometrics space are listening to today’s call. Our revenue guidance for the third quarter is in the range of $185 million to $200 million, which indicates our expectations of modest sequential growth from Q2. As Larry indicated, our incremental gross margin flow through expectations are approximately 25% on increasing revenues, which we expect will drive Q3 gross margin improvement to the high 14s level. We expect closely managed operating expenses to the $21.7 million level plus or minus $200,000. As we continue to prioritize our R&D investments in support of our new product programs and maintain the critical infrastructure that will enable us to quickly respond to customer demand, as the spending environment further recovers. At the midpoint of Q3 revenue guidance, we would expect to generate approximately $7 million of operating profit, which is a sequential growth increase of about 30% from Q2 levels, demonstrating the strong earnings leverage we can achieve as revenue volumes recover. Interest expense is expected to increase once again to approximately $5.3 million due to higher interest rates. Finally, our guidance on taxes as we move through 2023 continue to reflect the expectation of a net tax benefit to be recorded for the full year. Although we are expecting pre-tax income globally for the year, given the pre-tax losses incurred in the past. We expect to recognize a tax – a net tax benefit in the range of $4 million to $5 million for fiscal 2023. This is a bit smaller of a benefit than we forecasted last quarter, and given that we’ve recognized $3.2 million of the benefit year-to-date. For modeling purposes, you should assume a benefit of $400,000 at the midpoint of our Q3 guidance and approximately $1 million forecasted for another quarter of sequential growth expected for Q4. As we look ahead to 2024 on an ongoing basis, we expect to incur a nominal non-GAAP tax expense each quarter. And for modeling purposes, you should assume a 5% to 10% non-GAAP effective tax rate. Operator, we are ready to take questions. Please open the line.

Yes. Hi. Thanks for taking my question, and Larry, congrats on an amazing career and good luck on your retirement. You're going to be missed. And Greg, welcome. And I have three questions, and maybe all three for Jeff maybe. Jeff, thanks for the color on what happened in the quarter and your guidance, and it's kind of consistent with what you said a quarter ago, which is like you expect sequential growth. I'm kind of curious, like, given your limited visibility and the fact that your customers, like you mentioned, are trying to draw down inventory, what gives you the comfort that Q4 is going to be sequential growth? And is there any way you can quantify it? Or is it too early to quantify how December quarter is going to look like? And then I have two other questions.

Yes. I think that's a good question. So as to our visibility, you've seen movement, and we talked about builds moving and things like that. But in general, kind of the magnitude of what we're seeing is holding up, and that gives me some confidence that as our customers are working through this, that what we're seeing is what we're going to get, so to speak. So what I would tell you is I think the inventory correction at some of our customers is going to take us through this year to get done. So – but I think our visibility, quite honestly, has kind of moved around a little bit quarter-to-quarter and moved within advanced nodes and lagging nodes, but it's held up in kind of the same visibility for the year that we've seen. And so if you kind of just play the numbers out, you're probably looking at a 4% or 5% sequential increase off the midpoint of our Q3 guidance.

Got it. Very helpful, Jeff. And then the second question is you kind of mentioned that you're going to add a third 10%-plus customer this year. I'm assuming it's probably related to their exposure to EUV. Can you just help us talk a little bit about kind of like what your exposures are and how to really quantify it? Or like, kind of how you think about that going into later this year and into next year? And then I had one last question after that.

Yes, I think that we haven't quantified how much content we get per EUV. We generally don't do that even on the other gas delivery products or other areas. But they're very transparent. And so as you know, they've kind of slowed some of their builds down. We've seen some of that trickling through kind of the second, third and fourth quarter for us. But in general, they're still going to cross 10%. And I would say, next year, it's very difficult. If I could tell you what WFE was, I could tell you if they stay above it or below it, because they're going to be kind of near that level by the end of the year. So – but I would say, as a way to think about it is any indication they're giving you about their growth year-over-year, we're going to see it four or five months beforehand. So we'll have a piece of 2025 and 2024, so we would expect to see growth year-over-year still in that area.

Got it. Very helpful. And then my final question, Jeff, just like there's been a lot of focus on silicon carbide. It seems like a really exciting market. And my understanding is that you guys have some exposure to it. Can you just help us like frame kind of what your exposure is in terms of gas panels or gas boxes, where it is and how to think about that opportunity into next year for your silicon carbide exposure? Thank you.

Yes. I think it's an initial customer. I would say that it's a relatively complex gas box in comparison to a pretty easy one. So I'm not going to tell you the ASP. But I would tell you as kind of this year for us is high single digits and millions. And next year, I would expect that to continue to grow because we – I would expect it to probably double year-over-year only because we've pretty much been delivering just in the second half of the year with kind of smaller quantities in Q2. So it's a growing market, and that's at one customer. And there are other areas that are benefiting from this that we're also trying to engage with at this point, but it's too early for me to kind of give you any outlook on that. So…

Thanks a lot, Jeff, and congrats, Larry.

Thank you, Krish.

Thanks, Krish.

Hi, there. Thanks for letting us ask a few questions and also congratulations to Greg, and all the best to you, Larry. Maybe first question, so going back to the commentary around the design activity for the new gas panels with increased Ichor proprietary content, two successful qualifications, another progressing nicely. Can you – Larry or maybe actually, Jeff, can you discuss sort of were these wins kind of on cost, on performance merits or maybe a combination of both? And also kind of looking a little further out, if those go well, how could design-in activity kind of go from there forward?

Yes, that's a good question. So the simple answer is there is a cost advantage and a technology advantage, which is how we've gotten the attention of our initial customers. And so on an apples-for-apples basis, I think some of the new components that we've done, particularly around the flow controller actually can eliminate some components, which actually lowers the cost. So they see a pretty good cost reduction as well as performance enhancement, handling a wider range of gases as well. So sizing it, I would like to see these first applications move through their customer evaluation assets. The third one has to do that as well. And so maybe by the end of the fourth quarter something we'll have a good feel for how they're doing now that they've moved it from, say, their application lab in their facility out to a customer for their first tool.

Okay…

So more to come. Sorry, Brian.

Yes. That's helpful. Maybe for Greg, Larry or Jeff, on the cost structure, are you where you want to be right now in terms of resizing headcount, a lot of that's variable, and just the general expense structure of revenue growth off the bottom remains somewhat measured here still over the near term?

Yes. I think what we've done is we have a pretty variable model in direct labor workforce where we carry a lot of temporaries and stuff. So we have right-sized that to what we see as an adequate level to kind of address the next several quarters of demand. They're all fairly similar, as you know. And so we can handle any kind of uptick or anything like that, which is the over time and things like that. OpEx structure, we've taken more of a guarded approach because we have to continue our investments in R&D. The company is going to return to growth and scale. So we scale some places where we can and we've used kind of what I would call temporary variable cost reductions, which is PTO and things like that so – and then we're kind of not replacing attrition unless it's a critical role. So if we see 2024 not start to uptick, we may take a different approach in OpEx.

Okay, great. Thanks. Maybe sneaking one last quick question. You know that some end markets were incrementally better, including trailing nodes. What are your customers saying about the durability and sustainability of trailing edge investment in calendar 2024?

I think there is still remaining pretty positive about that. Obviously, there's some geopolitical issues that could slow that up, which I think don't have an opinion on. It's trying to curtail or require licenses for some of the lagging nodes that could slow things up. But right now, the demand is really pretty healthy. We participate in it fairly well, but there are more things that we can do to kind of support that and our customers as well. So some of that they still do internally, and we're working on seeing if we can help them, and I think it's pretty healthy market right now.

Okay, great. Thanks for the color.

You bet.

Hi, guys. Larry, congratulations on your retirement. And Greg, welcome. I guess maybe first for Jeff, just wanted to follow up on Brian's question on the sort of three customers adopting the next-gen gas channel. I know you don't want to share too much color yet, but would you classify or categorize these programs as kind of major etch/deposition platforms? Or are you sort of starting on more niche platforms to kind of get your feet wet and to see how the gas channel performs and then you would sort of target larger, higher volume systems, say, in 2025, 2026?

Yes. I think they lean more towards kind of the niche application, so not blanket films or something like that. So they are initially smaller applications that we can kind of cut our teeth, learn, get it out there and then move it to larger applications as we have success in the marketplace. But having said that, they’re not insignificant. They all stack up. So as we’ve talked about, you don’t need a lot of wins given the margin profile of that kind of shift from 90% procured to 70% or 75% internally manufactured to kind of move the needle for us. So we’re pretty excited. It’s kind of a little bit of a – we’ve gotten our qualifications going, we expect a third one by the end of the quarter as well. And then those have to move now to their customer qualification process. So we still got a little bit of lead time before we move to production.

Got it. And then second question, I think you mentioned the two areas of strength were trailing nodes, but also high bandwidth memory. I was just wondering if you could just share, Ichor plays in that HBM. Is that really more on the etch and dep systems for the three silicon vias or are there other applications where you’re seeing demand for the HBM application?

Yes, I mean, Quinn, I don’t see the sell through on everything. But I do know there’s certain tool types that are kind of focused on some of the packaging applications of high bandwidth and that’s where I’ve seen it. So I would infer that we see it across some other areas too. I wouldn’t say it’s gigantic, but it’s definitely a positive and a challenging memory market.

Got it. And then just last quick one for me. You mentioned sort of a change or shift in strategy for the Japanese market to try to accelerate some penetration. Could you elaborate on what actions you’re taking?

We’re reviewing, I mean, I don’t want to get in too much details. But obviously, we’ve been trying to work with partners and the question is do you go and get boots on the ground versus work with partners or some combination of the two. And that’s what we’re trying to sort out to see if we can get this accelerated.

Yes. Thanks for taking the question, and I’ll echo the prior congrats to both Larry and Greg. Good luck and welcome aboard. So Jeff, maybe I’ll start off with you. So it sounds like what you’re saying, while there have been some moderate movements some in, some out that things are tracking well to what you’ve been expecting three months ago. The question is this is, as we think about the potential for industry to move into a period of more significant acceleration one, are you seeing any signs that is happening? And two, if not, where would you expect those to emerge? And when would you expect those to start to surface?

So I’ll give you my view. I think memory, and I think we’ve talked about this at last several conferences we’ve been at. I view it as kind of middle of the year next year. I think foundry/logic I think is maybe a little bit of the wild card. I think the trailing edge remains fairly stable. And then when you kind of add that, I think our first silicon carbide opportunity is actually a pretty good growth driver year on year as well. So I do think foundry/logic has held up relatively well and I wouldn’t suspect that’s going to deep dive. But there’s a lot of both political and economic challenges right now that can change that direction. So a little bit too early to tell.

Yes. Got it. Okay. And then maybe switching over to Greg. So Greg, we had some nice cash generation in the second quarter and some of that was used to pay down debt. What do we expect with cash generation for 3Q and how are you thinking about potential further debt reduction?

So the – Craig, so the cash flow that we’re expecting, we will continue to evaluate where we’re generating our free cash flow and then as opportunistic, we’ll pay down our debt. But at this point, we expect that we should generate enough cash flow to service the business as well as address some debt in the quarter.

Yes, and I’ll just add Craig that we’re focused on inventory reduction. You saw a little bit of reduction this quarter and you saw a little bit incremental debt repayment. We expect to do a similar process this quarter. So hopefully we can continue to bring that inventory down. And then obviously with the interest rates where they are, debt repayment is a pretty high priority.

Yes. And then given Jeff’s earlier comments that we might see the fourth quarter up somewhere around mid-single digits, would it be fair to think that we would be able to generate cash and have sufficient beyond, growth initiatives to pay down debt a little bit more? Is that just too far out guys?

Yes. We would expect to continue to move our inventory lower as the primary driver for improved cash flow.

Yes, thanks for taking my questions. I was wondering as far as your OEM customers, where are we with the inventory levels there? Are we now matching their demand levels or is there still a significant level of inventory there and how long would you expect it to last?

Good question. Hey Dave. I think that on the component side of the business, I think it’s going to last through the end of the year. I don’t think they’re where they’re at. And it’s not an across the board comment, it’s different with each of our OEM customers. So it’s not one for all and all for one. So I think the component side is going to take longer, I think most of the gas panels that kind of get hung up between when we all drive this industry on forecast, forecast change. And so I think that is largely behind us. So it’s really working through the component business.

Okay. And then I think I understand it, you kind of answered it in different ways on this conference call, but as far as, when the industry starts to turn into, what areas do you think that you’ll outperform in or will allow you to grow faster than the industry? Silicon carbide is a good example. But maybe you could just outline what you think the two or three biggest opportunities are to outgrow the industry?

Well, I think, if we can take a horizon of a year or two, I think our new gas panels can have a material impact on us if we get qualified beyond the first three and add three and four. Silicon carbide obviously is a focus area for us, we’re supporting our first customer. We’re continuing to work on their next generation. This is an application I think is going to continue to grow and has some legs for several years for sure. And there are other opportunities in that space, as I said on the call, a little too early to talk about who we’re talking with. But there are some other opportunities that I think we can do that. There are opportunities I think for us to expand what we do for our EUV customer beyond just gas delivery. So there are other areas we’re working on. And I think as the industry rebounds, we’re so levered to etch and deposition when memory recovers, I think just that segment of the market and where we’re at, we’re going to outperform the overall market then because of that as well.

Okay. And final one from me is you mentioned this 25% drop rate on incremental revenue. Is that what we can kind of pencil in throughout 2024, which I would assume will be a much higher, will be a nice growth here?

Yes, I’ll comment, I’ll start. The – I think it’s fair that maintaining 25% flow through for all 2024, it’ll be dependent a little bit on product mix and kind of the pace of the recovery. But we expect to continue to drive market share gains and revenue growth in the components part of the business, which is a critical piece of our gross margin. And as Jeff mentioned, recognizing some of the new gas panel product revenues in 2024 should allow us to continue to achieve 25% flow through during the year. So we’re shooting for that. I mean, I think we’ve got a good plan and we just have to execute that plan as long as the market comes back, kind of where we see it today, I think that’s a reasonable expectation.

No, I’m sorry, just to clarify, if you see a broad adoption of newer gas panels, wouldn’t you think the drop rate would be higher than 25%? Or is that kind of baked into the cake?

I think initially it would, it might have a little upside, but let’s have some success before we re-up our outlook model at this stage. But it depends on the magnitude of it. Dave, obviously if you get 10 million, for example, it’s different than getting 20 or 25 or 50 that may change the needle, so.

Thank you very much.

All right. Thanks for the help.

Thanks, Craig. Thank you for joining us on our call this quarter. I’d like to thank our employees, suppliers, and customers for their ongoing dedication and support as we continue to navigate this highly dynamic business environment. Our upcoming investor activities include the Needham Semiconductor Conference being held virtually on August 22 and Jefferies Conference in Chicago on August 29. We also look forward to our next quarterly earnings calls scheduled for early November. Operator, that concludes our call.