Good day everyone, and welcome to the Onto Innovation Third Quarter Earnings Release Conference Call. Today's call is being recorded. At this time, I would like to turn the call over to Mike Sheaffer. Please go ahead.

Thank you, Ann, and good afternoon, everyone. Onto Innovation issued its 2020 third quarter financial results this afternoon, shortly after the market closed. If you have not received a copy of this release, please refer to the Company's website at www.ontoinnovation.com, where a copy of the release is posted. Joining us on the call today are Michael Plisinski, Chief Executive Officer; and Steven Roth, Chief Financial Officer. As is always the case, I need to remind you of the Safe Harbor regulations. Any matters today that are not historical facts, particularly comments regarding the Company's future plans, products, objectives, forecasts and expected performance consist of forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995. These estimates, whether expressed or implied, are being made based on currently available information and the Company's best judgment at this time. Within these is a wide range of assumptions that the Company believes to be reasonable. However, it must be recognized that these statements are subject to a range of uncertainties that can cause the actual results to vary materially. Thus, the Company cautions that these statements are no guarantees of future performance. Risk factors that may impact Onto Innovation's results are currently described in Onto Innovation's Form 10-K report for the year ended December 2019, as well as other filings with the Securities and Exchange Commission. Onto Innovation does not update forward-looking statements and expressly disclaims any obligation to do so. Today's discussion of our financial results will be presented on a non-GAAP financial basis unless otherwise specified. As a reminder, a detailed reconciliation between GAAP and non-GAAP results can be found in today's earnings release. I will now go ahead and turn the call over to Mike Plisinski. Mike?

Good afternoon and once again thank you all for joining us today. We will begin with a review of the highlights from the third quarter followed by Steve's review of our financial results. Before opening the call for your questions, I'll provide our outlook for the fourth quarter. So let's begin with the specialty device and advanced packaging markets which made up 50% of our revenue in the third quarter. Demand from these markets surged 44% in the quarter and our inspection business grew by over 20% from the previous quarter, while we added 12 new customers for both frontend and backend inspection applications. These customers spanned a variety of markets and geographies, but they shared the same need for higher fidelity solutions for both 2D inspection and 3D metrology applications. In fact, our 3D metrology business is up over 60% in the first three quarters of 2020 over the same period in 2019. The growing importance of interconnect technology is accelerating the progression of geometries using advanced packaging. As an example, several years ago, our largest customer in Taiwan announced a strategic focus on advanced packaging and at that time RDL geometries were roughly 8 microns and bump heights were 50 microns. Within a few years that quickly dropped to 2 micron RDL geometries and bump heights below 20 microns. We expect that that will be reduced by another 50% in the not too distant future. The tools that were good enough for process control even two years ago are simply not any longer. We see this dynamic playing out across each of the top five semiconductor manufacturers within this group and within this group we estimate our leading share increased by another 20% over the last two years. Likewise, process control requirements are increasing for higher-end packages integrated into the latest mobile devices. Once again, we see that trend benefiting Onto Innovation and in the third quarter revenue for front-end RF process control systems more than doubled and we expect it to double again in the fourth quarter. We believe data fidelity is also why a leading supplier of time-of-flight sensors for high-end mobile devices recently selected our inspection solutions for both front-end and back-end process control applications. The need for higher speed interconnects will continue to accelerate adoption of advanced packaging across a growing number of markets and we are ready with the technology and scale to support our customers to achieve their challenging manufacturing initiatives. Now in the advanced nodes portion of our business, our customers are challenged by shrinking geometries, new materials and complex 3D structures. Our new metrology suite coupled with our machine learning and fab-wide data analysis software uniquely delivers the sampling rates required to achieve higher yields and volume production. The reaction to our new metrology suite has been extremely positive. In the third quarter we have already taken orders and delivered Atlas V systems to an advanced memory customer and expect continued shipments to the customer in the fourth quarter. In addition, early versions of our Atlas V have been used by logic customers for the development of node generation at the smallest 2 nanometers. Logic customers have the smallest design nodes and most complex structures such as gate-all-around, so they make a very challenging proving ground for our technology. As a result of this early work, we expect to deliver additional Atlas V systems to logic customers in the fourth quarter. We also introduced an industry-first IRCD technology, which is integrated into our Aspect system for measurement of high aspect ratio structures and high aspect 3D NAND. These structures can be 100 nanometers in diameter, that's 80 times that in depth making this an 80 to 1 aspect ratio and extremely difficult to measure. Yet precise control of these deep channel holes is critical to performance. The Aspect's metrology can accurately measure these channel holes in a few seconds compared to the best x-ray speed of about five minutes per site. Because of this tremendous performance advantage, our Aspect system was recently transitioned from R&D to production at a major memory IDM for final qualification of the technology. Within this production environment, we will further enhance the value by leveraging our ONTO metrology ecosystem which includes Atlas metrology and AI-Diffract machine learning software. This new software enables advanced modeling of systems’ spectral data and the integration of multiple data streams to improve times of solution and process robustness. AI-Diffract is backwards compatible with our legacy platforms and since its release several months ago, we've already installed it on systems at three of the top five semiconductor manufacturers. We are beginning to see opportunities to add compositional analysis to our ecosystem through the Element system. In the third quarter, our Element metrology system was selected by a top equipment manufacturer to help develop next-generation transistor technology since x-ray is not effective for light elements like hydrogen and it's destructive for films larger than 100 Angstroms. We see this as a great opportunity to explore and develop additional applications and system capability for our customers in a truly cutting-edge R&D facility. Finally, our new integrated metrology module, the IMPULSE V completed qualification at two of the leading CMP equipment providers where we demonstrated best-in-class speed, as well as measurement sensitivity for thinner films down to 20 Angstroms in thickness. We've demonstrated throughputs that up to 30% faster than existing integrated metrology systems on the market and already meet our customers' next-generation requirements. You can see that in our first year as Onto Innovation we have deepened our customer engagements in the advanced nodes by aligning roadmaps with our customers' future manufacturing challenges. We are leveraging our broad portfolio of sensor technologies, powerful data analytics, and a passionate team to provide a significantly more compelling value proposition to customers across the value chain, and this is setting us up well for growth in the fourth quarter and in 2021. Finally, our strong financial model is fueling the scope and scale necessary to keep pace with the demands of a consolidating customer base. And with that, I'll introduce Steve to discuss more about our financial highlights.

Thanks, Mike, and good afternoon everyone. In my remarks this afternoon, I'll provide some details behind our Q3 results. I will also provide some insight in what we're seeing for gross margin operating expenses going forward and then discuss our guidance for the fourth quarter. Our third quarter revenue was $126.5 million slightly below the midpoint of our guidance and it decreased from $134.9 million in the second quarter. Quarter-over-quarter, our Q3 results were impacted by lower metrology sales offset by strength in our inspection and wafer business and a second consecutive record quarter for our service business in spite of travel restrictions due to COVID-19. Breaking the revenue down by market, 50% of our sales were in our special device and advanced packaging markets. Within that market, we saw strength with RF, NAND, and power customers. In addition, we saw strength from our advancing packaging OSET customers recovering from weakness we saw in Q2. Software and services represented 28% of revenue helped by the record service revenues that I just mentioned and advanced nodes decreased in the quarter and represented 22% of revenues. Within advanced nodes, we saw weakness in both memory and foundry. Turning to gross margin, we continued to see improving margins even with the decline in revenue with third quarter gross margins at 54% above our guidance and driven by product mix. This compares to a gross margin of 53% reported in the second quarter. As we look forward to Q4, we expect increasing metrology sales and supply chain synergies impacting our product margins and currently anticipate margins to be in the range of 53% to 55%. Now to operating expenses, third quarter operating expenses were $45.1 million below the low end of our guidance and a decrease from $47.7 million in the second quarter of 2020. The decrease was primarily the result of an increase in paid time off as employees began taking vacations which in previous quarters were low due to COVID-19. In addition, research and development expenses decreased in the quarter as the company completed an additional milestone in a contracted R&D project which lowered expenses in the quarter. We continue to control our headcount as we focus on identifying additional synergies from the merger. In the fourth quarter, we view certain reductions in the third quarter to be temporary in nature and, as such, expect an increase in operating expenses in the fourth quarter. Based on that, we currently anticipate Q4 operating expenses to be in the range of $46 million to $47 million and well below the $52 million quarterly 2019 run rate of the combined companies prior to the merger. Net income increased in the third quarter and was $19.6 million or $0.40 per share and at the high end of our guidance, and 47% above the Street estimate of $0.34. In 2020 second quarter, we reported net income of $20.8 million or $0.42 per share. Higher gross margin and lower operating expenses contributed to the strong performance. Moving to the balance sheet, which is on a GAAP basis, we ended the quarter with a cash position of $340 million, up $28 million from Q2. Year-to-date our free cash flow is 24% of revenue excluding cash used for merger expenses. Cash receivable declined in the quarter and ended at $131.4 million, and inventory increased in the quarter to $185 million for anticipated Q4 sales increases. Now turning to the fourth quarter, we expect revenue to be in the range of $150 million plus or minus $5 million. In this revenue range, we expect earnings to be between $0.55 and $0.66 per share. At the midpoint of the revenue, gross margin and operating expense guidance that I provided, we expect our Q4 results to be within the long-term operating model that we established for ONTO when we announced the merger last year. With that, I'd like to turn the call back to Mike for additional insights into our Q4 guidance.

Thank you, Steve. We've never been more confident in our team and in our future. This confidence stems from our achievements this year with merger integration, managing through the pandemic, and the traction of our new products in the market. We're just beginning to see the fruits of this labor in the fourth quarter revenue which at the midpoint of guidance will increase roughly 19% over the third quarter and 15% over the fourth quarter of 2019. This expected upturn is driven by increases from our logic customers and a modest recovery in memory in Q4, which we expect to continue into early 2021. So as expected, demand for our current products are strong and we have shown the traction in our new metrology suite that we believe will provide additional growth opportunities later in 2021. I'm also very excited to announce the availability of the IRIS metrology platform for planar films applications through close collaboration with the top three semiconductor manufacturers. We successfully demonstrated the required performance ahead of our original timeline. This top manufacturer already placed an order for a tool to ship this quarter, and we expect to ship a second tool in the first quarter and volume orders through 2021. With the addition of this tool to our portfolio, we have expanded our SAM and now offer one of the most comprehensive optical process control ecosystems in the industry. This suite is positioned to serve all of the segments in the roughly $1 billion optical metrology market. By leveraging our discovery platform and AI-Diffract software, we are able to aggregate our unique data streams to solve critical dimensional and material challenges at speeds volume production requires. This is another great example of how Onto Innovation is leveraging the breadth of our technology and the strength of our team to deliver new and compelling solutions to our customers. Likewise, we see our specialty and advanced packaging customers contributing strongly to the fourth quarter. Traditionally, demand from these more volume-driven customers softens in the fourth quarter due to seasonality effects where holiday inventory is already in place. However, higher than expected orders for new Apple and Samsung 5G handsets are raising demand forecasts. This is especially exciting for Onto Innovation since the 5G enabled smartphones contain higher, more complex RF content. Using a variety of sensors, including our exclusive Clearfind technology, our Dragonfly systems are able to detect and classify the submicron defects critical to these devices. This helped drive our Q3 RF revenue to more than double over the second quarter and we expect revenue from our RF ecosystem to double again in the fourth quarter. We have seen incredible demand this year for our inspection solutions. We project to end the year with inspection growing 25% over 2019, far exceeding general market projections. We believe this reflects share gains across all of the most demanding applications in advanced packaging and the strength of our solutions across the 5G ecosystem. In 2021, we expect to continue to build on our entry into the CIS market with additional customers adopting our higher fidelity solutions for their leading-edge camera designs in both mobile and automotive applications. So in conclusion, this is an exciting time for the Onto Innovation team. Throughout this year, we have made incredible improvements to our operational model and efficiencies, very quickly aligned roadmaps and accelerated key areas of development, so we could provide solutions customers did not imagine previously. We see the traction across the semiconductor value chain from all of our core product lines. As a result, we are well positioned across multiple secular growth markets, including high performance compute, 5G and cloud computing, and we look forward to the growth in the fourth quarter and a stronger 2021. And with that, we'll open up for your questions. Ann?

Thank you. And we'll take our first question from Patrick Ho with Stifel.

Thank you very much, and congrats on a nice quarter and outlook. Mike, first off on the specialty semi’s and advanced packaging, you gave a lot of great color in terms of some of the inspection opportunities, particularly for the mobile market. Can you discuss both the near term opportunities as well as some of the longer term opportunities as it relates to high performance computing applications? Given that, devices are changing, they're becoming more complicated to measure and analyze, can you discuss some of the opportunities there, both in the near term that you're seeing as well as longer term?

Sure, thank you, Patrick. Well, it's all around interconnect technology right now. So interconnect technology is continuing to shrink, which in and of itself makes for more complex systems and more complex metrology capabilities. So not just looking for defects but also making critical measurements. In addition, the near term opportunities are around the quality of the surfaces for interconnection to other die and other interfaces. So this is where the clarifying technology is proving to be very valuable in detecting what typically can't be seen, which is resist residue on these interconnects. So right now, I think the market is continuing to expand its understanding of these defect failure modes, and the opportunities our systems can provide. In addition, as we look forward, I think the heterogeneous die, and the more complex packages, that better interconnect technology helps bring forward will also provide new opportunities for growth, especially for Onto Innovation, where we're also providing the lithography systems on a panel format, that seems to be the format of choice for system and packages are heterogeneous die, heterogeneous packages. We’re seeing that first in high-performance computing. There's a lot of demand for it there. But I believe that we'll migrate down into some of the other specialty devices, and we're seeing it in our front-end modules. I believe we'll see it in other modules as well like camera technologies, CMOS image sensors, where you may want some compute engines, especially as these cameras become more sophisticated and consumers demand higher amounts of processing power closer to the camera for faster image acquisition, processing and decisions. Again, that becomes an integrated package. I think those are some of the things we're seeing.

Great, that's really helpful, Mike. And maybe as my follow up question, on the front-end semi side, you mentioned some of the opportunities for your new products aside from the Atlas. Can you discuss, I guess, excluding maybe the planar films which you just introduced, can you discuss the increase in capital intensity that you're seeing on the metrology and given some of the new products you introduced, some of the non x-ray solutions that you talked about, how that's increasing capital intensity trends or the metrology portfolio that you have today?

I believe this will certainly generate more demand and opportunities for our portfolio, which in turn will enhance ONTO's potential for increased capital intensity within the line. Regarding the Elements area, it's gaining traction for certain x-ray applications and with Aspect customers due to their recent introduction. Customers are actively exploring various applications to fully understand the capabilities we offer. Initial applications are progressing well, and customers are also expanding their use beyond our original intentions, which is the goal of entering production and having our strong applications team assist them in broader adoption. As we witness this wider adoption, we will gain clearer insights into the scale of opportunities available. What we consistently hear is that while x-rays are intriguing for R&D, customers are having difficulty envisioning their use in high volume production. Our suite of solutions, tailored for high volume production, has generated excitement, as evidenced by the traction we've noted in the third quarter. However, we still need to demonstrate our effectiveness, get these solutions into production, and start seeing repeat business to truly gauge the extent of these opportunities.

Great, and final question from me for Steve. In terms of some of your process tool peers, they talked about building a little bit of inventory of supply and parts, just given the uncertainty that's out there in the marketplace today. Given your process control focus, you do have longer lead times or certain supply, uncertain supply. Is there any need on your end to build inventory given the improving demand environment, as well as the uncertainties in the marketplace?

No, Patrick, I don't see that. I mean, we've actually been ahead of that curve probably since the beginning of the year when you first started talking about COVID. I think you saw our inventories jump up at that time. And I think our whole supply chain organization has done a great job of kind of being ahead of the curve, especially working through COVID and as well as even the ramps we are starting to see with our sales in the fourth quarter. So I don't see that happening.

Yes, I will add just a little bit to that.

Let's take our next question from Craig Ellis with B. Riley.

Hey, guys, this is Collin John for Craig, thanks for taking the question. I guess I'll start at a high level. Since you guys last reported, AMAT has come out with some front-end macro inspection. News and KLA had talked about advanced packaging, I guess I'm just trying to understand from a share percentage where we were last quarter with your assumptions, kind of where we are now and looking forward if you see any change, just kind of in the broader landscape, that would be super helpful?

So KLA’s always been in the advanced packaging market for 15, 20 years or maybe not quite that long, but for a significant amount of time. We've maintained the number one share in that market for that entire time. So I don't think that's anything new. I didn't hear the other company, did you say AMAC or AMAT?

AMAT, Sorry.

Oh AMAT, no I didn't hear that they announced any macro inspection system, so I'm not aware of progress there. We'll have to check on that. So yes, no, team has heard of that. So right now, we're the leaders in the space. We've continued to grow the share. As I mentioned earlier, we had 25% growth this year in macro defect inspection primarily from the advanced packaging markets. We talked about the top five IDMs. We think we grew our share about 20% over the last two years because of this shrinking geometries and the higher demands for the quality of the data streams. And so we're actually excited about continuing to gain share and grow our position in the market.

Got it, okay. And then jumping down to OpEx line, obviously, it sounds like you had some kind of one-timers in the quarter with the PPO, but last quarter, you mentioned that there was going to be continued opportunity for kind of synergy harvesting. I guess I'm trying to figure out where we are in that process? And then looking out to maybe Q1 not understanding, I can't give any explicit guidance. But is there any kind of year-end charges that we would expect to kind of step up and any further synergy harvesting that may offset that. So, last quarter, I think the guidance was for $47 million, and now it's $46.5 million at the midpoint? Could we get down to $46 million or $45.5 million in a normalized environment or given COVID, all these COVID charges, is that kind of fair to say or are we kind of bottoming out here at the $46.5 million?

I wouldn't say we're at the bottom yet. We're consistently exploring new opportunities that arise daily, particularly in our R&D programs. There isn't a clear indication that we've reached a minimum. Some programs may lead to synergies in R&D efforts, but they are long-term projects that will take time to develop rather than providing short-term results. You’re correct in noting that the impacts from COVID have affected our Q3 numbers, and we anticipate some recovery, though not entirely, especially with the holiday season approaching. Overall, I expect total levels in Q4 to vary. There's nothing out of the ordinary; we're continuing to see a decrease from the $47 million adjusted midpoint. Looking ahead, there are no specific one-time impacts expected in Q4. Typically, Q1 experiences a slight rise in operating expenses due to payroll taxes and other resets, but I don’t expect that to be significant. We have effectively managed to reduce operating expenses, and while there may be opportunities going into 2021, I can't quantify them at this moment.

Got it. That's very helpful. Lastly, regarding gross margin, I'm interested to know that it seems you've had significant strength with the new products. Last quarter, it was mentioned that we could expect a mixed contribution from these products throughout 2021. Is that still a valid perspective? As these new products increase in volume and gain traction, should we anticipate a positive contribution to gross margin throughout the year, or are you starting to notice some strength in the first half? Any insights you could provide would be appreciated.

Yes, when you look at the entire year, you can see that we've improved from the first half to the second half, and the overall margin profile has increased. Part of this is due to the introduction of new products and the supply chain efficiencies we've mentioned that will impact Q4. I believe as we approach the $150 million revenue range, we should align with our long-term model, which starts at 54%. I anticipate margins moving from 54 to 55 as we exceed 150 million in revenue, and I think our model, which expects revenues to be over $600 million, will show that the minimum gross margins will exceed 54%, reaching the mid-55s.

Got it, alright. Thanks, guys.

We'll take our next question from Tom Diffely with D.A. Davidson.

Yes, good afternoon. First, Steve following up on the operating question from earlier, what do you think the net impact of COVID has been either positive or negative on the OpEx and which of those pieces do you think are somewhat permanent going forward?

That's a great question, Tom. I don't believe the changes are that significant for us. The most notable impact has been on travel, which we have significantly reduced. I expect this trend to carry into 2021, particularly until a vaccine is available, allowing us to return to some normal activities. Therefore, I anticipate that the first half of 2021 will see ongoing COVID-related cost reductions in travel, though we may gradually ease these restrictions. Travel is the main area affected for us; we don't have many other significant changes to report. Our team continues to work, manufacturing remains active, and our R&D projects are still ongoing. While most of us are working from home, the overall impact of COVID on our operations has been limited, aside from travel. I don't think any of these reductions are permanent. Eventually, as everyone returns to the office and travels resumes, I believe we'll get back to normal. Overall, I don’t foresee a substantial impact from these adjustments.

Okay, that's helpful. And then Mike, it sounds like some nice momentum with the Atlas V. I'm curious, so what drove the softness, the weakness in metrology in the quarter? And then when you look over the next year, for Atlas V specifically, is it the logic foundry gain that's going to be the biggest driver? Is there going to be a memory recovery? Do you think that's the biggest driver of the new platform?

For the new platform it looks pretty broad based. So we're seeing, we've already shipped with orders to memory customers I mentioned and then we're shipping to multiple logic customers in the quarter. So the demand and the value proposition is fairly broad based. As far as what drove the drop, I think, we described it before, as largely two customers who are pretty strong spenders in the first half of the year, had a pause, a digestion period, however you want to call it, and we're seeing that pick right back up as we expected in the fourth quarter, a little bit stronger than we expected. And I would say, behind that is also some increasing optimism from memory manufacturers and additional expansions there, which we hope to see carrying forward into the early part of 2021.

Okay, I know that you previously on the OCD tool, you had penetration into virtually all the top 10 customers out there, I'm curious, have most of them now taken a set of Atlas V or do you still have some penetration left to do?

We still have penetration left to do. So the Atlas V is just coming out, well released three, four months ago. So yes, so we're just in the early stages there of penetrating and transitioning customers from one generation to the next generation of Atlas.

Okay, thank you.

You're welcome.

We’ll go next to David Duley with Steelhead Securities.

Yes, thanks for taking my questions. A couple of, first one is, as far as your inspection business goes, you've shown obviously above market growth and above unit volume growth. And I'm kind of curious, I'm sure there's three or four reasons for this, but if you could just summarize, why that business is growing so rapidly now, besides obviously, a pretty strong ball and recovery that we're currently seeing?

Yes, I think it's the stronger requirements or the tougher requirements for our customers for their process control. So as I mentioned, what was good enough before for the market, it really isn't any longer. They need higher quality data, more repeatable, they need tool matching, they need all the sophisticated capabilities that we used to have from front-end, macro defect inspection that we've built into the systems over years. Now the back in advanced packaging and specialty device manufacturers are seeing demand for that same kind of process control in their markets. And they're seeing it not only for the performance of their devices, but also their end customer demands. So as these devices are becoming combined together, and integrated into other packages, end customers like let's say an Apple or Qualcomm or somebody like this is concerned about stacking tolerances and errors for the whole package due to stacking tolerances. So they want to tighten up the process variation and tighten up the performance requirements as much as possible. And that means you need a better ruler, and we provide that better ruler. So I think that's where we're seeing the market really coming towards us. And what's exciting for us is it's not just the top five IDMs which we have seen that and talked about that over the last couple years, but also now we're seeing it in the specialty devices and even which, it is primarily 5G right now, but as we mentioned last quarter with the CMOS image sensor company also had higher process control requirements that the incumbent technology couldn’t meet and that was one of the reasons we won that business. So the market certainly coming towards us and I'd say that's the biggest reason why we're seeing the increased demand.

So similar to, the test guy is seeing significant increases in test time and test intensities. The inspection intensity is also growing fairly significantly with these new products and advanced packages. Do you have an idea, is there, is it 50% more inspection intensive now, let's say with the current device maybe a 5G device versus a 4G device or do you have any metrics there?

I would say it varies by customer, but overall, some of the more advanced customers, I'd say it's about a 2x to 3x increase in intensity so the leading customers. Some of the trailing customers, maybe aren't there yet, but I believe they will be as they try and push their devices up the value chain.

Excellent. Well, final question from me. I guess it's a little bit complex, but you've talked about a host of new products and upgrades to the current products. If you could just review, I think you have several brand new products that address new markets, if you could just help, just outline a couple of new products that you have, what is the rough addition to the TAM that those new products bring?

The biggest addition is the Iris platform, which will open up the planar films market, estimated to be around $400 million, a space where neither Rudolph nor Nanometrics have previously operated, as it is primarily dominated by KLA Tencor. Our initial launch of the platform targets a specific segment of this market, about half, and we plan to further develop it to eventually encompass the entire planar films market. This represents the largest increase in the serviceable addressable market. Additionally, the Element compositional analysis tool, primarily used in wafer manufacturing, is being rolled out across nearly all major wafer manufacturers. We're starting to observe demand, particularly for high-end memory devices, and we see potential in logic as well for this non-destructive, inline analysis capability in the fab. This could significantly boost our total addressable market by an estimated $30 million to $50 million based on initial discussions, although this market is relatively new and customers are still adapting, as mentioned last quarter. The Aspect tool is similarly positioned. As the 3D-NAND market shifts to higher stacks and faces challenges in measuring channel holes, we're providing solutions for high-volume production. While this may not greatly expand our total addressable market, we are discovering additional applications in other markets that could be promising, and we will share those findings as we quantify them. The Atlas V presents more of an opportunity to gain market share, given its sensitivity and capabilities, particularly at 2 nanometer levels. We have a platform that can meet the throughput and sensitivity demands for volume manufacturing expected in the next four to five years, presenting a compelling value proposition. Therefore, while this is less about expanding the total addressable market, it focuses more on gaining market share.

Okay, I promise I have just one more. I think you have several lithography systems in backlog which are expected to ship early next year. With that in mind, do you have, can you make any commentary towards the March quarter and what you see seasonality wise?

We are very excited for the March quarter.

Okay, thank you.

Yes, we were, as I mentioned, we see the memory expansion, which we're starting to see here in the fourth quarter, and we think that's going to continue into the first half, I think I said early 2021. So you take that and you take some of the shipments on lithography and you start to get a little excitement building for the first quarter. And then the continued growth in 5G, I mean, that's another area that's you can tell from our numbers right now, we have a very strong demand for inspection in that area and with I believe the latest forecasts was the 5G handsets will double yet again in 2021. That demand is going to continue for our level of process control systems, inspection and metrology. So yep, we're very excited about the first half of 2021.

Thank you.

We’ll take our next question from Mark Miller with Benchmark Company.

Hi, congratulations on your results. I was just wondering, in terms of you're talking about memory starting to come back, do you think that will be more weighted towards DRAM, the NAND or do you see both of these memory markets improving?

Right now, we’re seeing both. I think that the industry numbers we've seen suggests DRAM will recover a little stronger or grew a little faster, but from what we've seen, we think that yes, both are going to be recovering for us and contributing to our growth. I think with NAND having so many more players in the market, it's a little bit harder to see who's going to where the pricing and all the capacity is going to be. But right now, we're seeing really growth from both DRAM and NAND.

You had a strong year for macro defect inspection. Do you feel you're picking up share there?

We do. Yes, we do. We think that we're picking up share on the specialty devices within the 5G ecosystem. We think we're picking up share on the really high end IDMs. So a number of these IDMs have transitioned and started to invest much more in their advanced packaging technologies. They've added, I think I've mentioned Intel and TSMC and Hynix and Samsung, have all talked, even Micron have all talked about advanced packaging being a key enabler for their roadmaps moving forward and various flavors of it. And we believe those demanding customers are increasingly are more frequently choosing the ONTO solutions.

How many 10% customers last quarter, and what were - there is?

Yes, Mark, there was one 10% customer, that was over 10%.

Was that memory, logic, or foundry?

Foundry.

And finally, just a housekeeping issue, cash from operations and CapEx?

CapEx, you're asking for the quarter?

Yes.

It was minimal. Looking at year-to-date, we were only at $3.4 million. So it's been way below normal run rates. And that's again, that's because of, I think obviously COVID slow down that process of a lot of our stuff is internal tools. Most of our CapEx tends to be internal tools. So there's a lot of people in the slowdown and working from home that less demand on having additional tools. There has been some increase of late because obviously some of the new products that Mike mentioned. So we'll be developing training tools that we'll need for those.

And cash from operations?

Cash from operations is well run that right now running $60 million, $70 million cash from operations. It was like 22% of revenue for the quarter.

You said $72 million?

$70 million for the year-to-date.

Oh $70 year-to-date, okay.

Yes, I guess they were, have to call up the difference for the cash flow statement. As you'll see, it's $72 million for the year-to-date.

Okay, thank you.

We'll go next to Charles Shi with Needham & Company.

Hi, Mike and Steve, thanks for taking my question. I have a few. Maybe first off, let me ask about any SMIC exposure in the third quarter and whether you just wonder if you have adjusted down your fourth quarter guidance for any of the SMIC export license requirement? And if you can shed a little bit of light into what's required for an export license for shipping to SMIC that will be great? Thanks.

Currently, what is needed is to apply for a license, complete the necessary paperwork, and within about 60 days, you should receive a response from the government. This process applies to specific products and their classifications. At present, the products we are supplying to SMIC do not all fall into the category where military use applies. Therefore, our existing policies with SMIC remain unchanged, and we continue to operate and support them as we have in recent weeks and months.

Yes, got it. Got it. So maybe the second question is a little bit into the composition of your revenue mix for third quarter, definitely. The inspection business is strong, specialty device, advanced packaging were surging and which offset by some of the temporary weakness in the metrology side of the billing business, definitely demonstrating the stability, enhanced stability of the merged company of Nanometrics into Rudolph. So I just really want to ask, how much can you quantify how much of the metrology revenue was pushed out of third quarter, and how much of that can be recognized in the fourth quarter?

So it wasn't as much push out as it was less demand. So we had strong demand in the first half and then pause in demand, and then now accelerating growth in the fourth quarter. So I think the, if you look at the inspection surged, grew by 44%, metrology slightly bigger. So it would be down 25% or 30%, something like this.

Got it. Got it, thanks.

On the second quarter, and then of course, growing fairly significantly in this fourth quarter.

Got it. So maybe my last question, really is on the prospective tool, congratulations on having your tool transitioning into the high volume production. Hopefully, that's very soon. Can you give us hope on the very high level when you expect to recognize the first revenue and how the revenue ramp could be, could look like in next year, if you can quantify that revenue run rate? That would be great.

Yes, so the, you're asking specifically about the Aspect tool. So that is, I would say by first quarter of next year, possibly sooner, but first quarter of next year, we would expect to be able to close out this current evaluation. We're shipping additional units, so to different customers and those are all recognize within, I would say, six to nine months between, for evaluation and moving into qualification. And then the question is, how quickly the customers ramp or do they ramp that product in parallel, because it's so far proving to be a very stable platform that requires a lot less application support and the recipes tend to be more robust et cetera. So I think the adoption will be faster than normal, much more complex Atlas platform. So if you're asking about Aspect that's the answer there. I think the Atlas, which we're seeing much faster, let's say stronger adoption and stronger pull, I would say that would be contributing meaningfully in the second half of next year. So we'll continue to ship and deliver units this year. We're recognizing revenue on it already and we'll see that ramping up maybe 5% to 10% of revenue by second half of next year.

Great, thanks for the color. Thank you.

And with no further questions in the queue, I would like to turn the call back over to Mike Sheaffer, with any additional or closing remarks.

Thank you. We'd like to thank everyone for participating in the call today and for your continued interest in Onto Innovation. That concludes our remarks for the call. Ann, please wrap it up. Thank you.

Again, this does conclude today's conference. We thank you for your participation. You may now disconnect.