Good day. My name is Priscilla, and I will be your conference operator today. At this time, I would like to welcome to the KLA Corporation First Quarter Fiscal Year 2021 Earnings Conference Call and Webcast. All participants’ lines have been placed on listen-only mode to prevent any background noise. After the speakers’ remarks, there will be a question-and-answer session. I would now like to hand the conference over to Mr. Kevin Kessel, Vice President of Investor Relations. Please go ahead.

Thank you, Priscilla, and welcome to KLA's fiscal Q1 2021 quarterly earnings call to discuss the results of the September quarter and our outlook for the December quarter. Joining me today is Rick Wallace, our Chief Executive Officer, and Bren Higgins, our Chief Financial Officer. During today’s call, we will discuss quarterly results for the period ending September 30, 2020, that we released today after the market closed in the form of a press release, Shareholder Letter, and slide deck. All of these documents can be found on the IR section of our website. Today’s discussion of our financial results and outlook is presented on a non-GAAP financial basis unless otherwise specified. A detailed reconciliation of GAAP to non-GAAP results is in today’s earnings materials posted on the KLA IR website. Our IR website also contains a calendar of future virtual investor events as well as presentations, corporate governance information including our quiet period policy, and links to KLA’s SEC filings, including the most recent annual report and quarterly reports on forms 10-K and 10-Q. Our comments today are subject to risks and uncertainties reflected in the risk factor disclosure in our SEC filings. Any forward-looking statements, including those we make on the call today, are also subject to those risks, and KLA cannot guarantee those forward-looking statements will come true. Our actual results may differ significantly from those projected in our forward-looking statements. We changed the format of these calls last quarter to include pre-publishing a shareholder letter that provides deeper insights into our business. We will also start by providing some streamlined highlights from our full prepared remarks while still providing more time overall for your questions and answers. With that, I'd like to turn the call over to our President and Chief Executive Officer, Rick Wallace. Rick?

Thanks, Kevin, and welcome to everyone joining us today. As we rapidly approach the end of the calendar year, it's amazing when I stop to think how much has changed over the last 12 months. I hope you and your families are safe and in good health, and I appreciate your continued interest in and support for our company. I want to make sure I begin my remarks today by conveying my appreciation to the worldwide KLA team. It's your perseverance, striving to be better, and determination that exemplify KLA's core values and enable us once again to meet our commitments and to deliver exceptionally strong financial performance in the September quarter. On behalf of the entire KLA executive team, I want to thank you. In this quarter's Shareholder Letter that was published today, we highlighted how our results demonstrate the resourcefulness of our global workforce, the resiliency of our business model, and our continued commitment to returning value to our shareholders. As many of you may have already seen, our September quarter revenue and non-GAAP EPS both finished at the upper end of our guidance, a result of continued strong demand from customers, exceptional execution by our global teams, and the enduring strength and resiliency of the KLA operating model in guiding our strategic objectives. I'm pleased to say that we are continuing this momentum into the December quarter and nearing the end of what truly has been an unprecedented year in calendar 2020. Most importantly, we are executing at a high level, operating from a position of strength in our marketplace, and are solidly on track to meet or exceed our 2023 financial targets. In terms of the resourcefulness of our global workforce, we just completed the third quarter of operating through a pandemic. COVID-19 has presented an unexpected opportunity to showcase KLA’s resilience and resourcefulness in these unprecedented times. We have begun proactively taking steps to mitigate disruption in our business and remain vigilant of the risk posed by the virus to our people. We've done this by adopting strict safety protocols to protect our workforce while innovating new ways to collaborate with customers and partners. As demonstrated by our strong performance throughout 2020, we are successfully meeting customer needs, executing our R&D roadmap, and operating our worldwide manufacturing facilities efficiently. We continue to evaluate and adapt at various facilities in accordance with local regulation, prioritizing employee health and safety. Our worldwide teams deserve praise for never losing sight of what our customers want and need to improve their businesses and to drive better yield management. We benefited from them being exceptionally resourceful and as always remain committed to customer satisfaction and meeting our commitments. While we consider the challenges our worldwide teams are facing today, we recognize that they extend well beyond the workplace, which makes us intently focused on ensuring that we're supporting our teams and our people in every possible way. Lastly, investment in the long term remains an important priority for us. We're confident that our R&D programs will help strengthen our technology and market leadership. We’re gratified by the effectiveness of our business continuity actions, which have allowed R&D activities to adapt, although not without challenges, and to continue through this pandemic. Now, turning to the industry demand environment. In the September quarter, we saw broad diversified strength across each of our segments. Semiconductor process control revenue was solidly above plan and our services business delivered strong operating leverage and is on track to deliver double-digit growth in 2020. We also ended the quarter with strong backlog, reflecting the enabling role KLA plays in our customers’ technology roadmap and investment. Driven by the circular industry trends and the ongoing commitment by our customers to invest in R&D for next-generation technology, the stage is set for KLA’s outdoor market in calendar 2020. Today's environment continues to accelerate the adoption of several industry growth drivers that we originally outlined in our 2019 Investor Day. The integration of digital technology into our lives is transforming the way we live and work, resulting in a fundamentally changed way businesses operate and deliver value to customers. This digital transformation is fueling secular demand drivers, such as high-performance computing, artificial intelligence, and accelerated migration to the cloud from on-prem applications, as well as 5G communication, driving investments and innovation in advanced memory and logic device technologies. Process control is on the critical path of enabling this digital transformation, driving our growth and long-term revenue and profitability. The addition of the Orbotech in 2019 to our business portfolio has expanded our exposure to the compelling industry trends. We’re all driving this all-important digital transformation in our own business as well, including adopting new productivity tools to improve collaboration with our global teams and customers. For example, our customer service organization has been working closely with customers to expand remote service technologies, which augment our in-country service and installation engineers. We’ve also recently adopted and integrated a new cloud-based platform for managing our global HR management system that should continue to benefit us as we scale. Finally, we're also integrating cloud-based manufacturing and service planning tools to increase the visibility of our parts demand to our suppliers and to allow us to more proactively respond to customer service requirements. Here are just a few examples of the accelerated digital transformation that we ourselves are experiencing inside at KLA as we adapt to this new environment. Here are five top highlights from our most recent quarter. First, as expected, we saw continued strength and breadth in foundry and logic demand in the September quarter. These customers are benefiting from investment in digital transformation to support the secular growth drivers that we mentioned earlier, and we expect this demand to remain healthy in 2021. In memory, total utilization is high, and memory customers continue to drive down device inventories and plan for higher bit growth in 2021 to meet expected improvement in demand. We expect higher business levels across a broader range of customers in the December quarter with momentum continuing into 2021. Second, we ended the quarter with strong backlog, demonstrating momentum in the marketplace across multiple product platforms in both the semiconductor process control and EPC groups, fueled by new applications in our optical inspection portfolio, such as EUV print check for Gen5, and the success of our new offerings, including the eSL10, e-beam inspection platform, we're seeing strong adoption of our patterned wafer inspection product suite, driving our market leadership and what we expect will be a year of growth for process control. Third, our service business continues to perform well and is positioned for double-digit growth in 2020. KLA's service revenue is 25% of the total quarterly and is delivering long-term growth at a rate that's double the underlying industry WFE growth rate. Fourth, it was another strong quarter for Electronics Packaging and Components group, or EPC, highlighted by the record demand of our PCB division. The strong growth in PCB was driven by EPC's high exposure to the 5G infrastructure and smartphone market. SPTS and ICOS divisions are also benefiting from the transition to 5G along with increasingly complex advanced semiconductor packaging. Finally, in keeping with our commitments to deliver strong and predictable capital returns to our shareholders, we announced back in July that our Board of Directors approved our 11th consecutive annual dividend increase. During the September quarter, we returned $329 million to investors via dividends and buybacks. Over the past 12 months, we've returned $1.3 billion to shareholders or 82% of free cash flow. We believe our track record of delivering strong capital returns is a key component of the KLA investment thesis and offers predictable and compelling value creation for our shareholders. Before I hand it over to Bren to get into greater detail on our financial highlights, let me briefly summarize. Despite the disruption and unforeseen challenges in the year associated with the pandemic, KLA has benefited from the resourcefulness of our global workforce. We have adapted well, and we're very well positioned for a strong finish to 2020. This demonstrates the critical nature of our products and services in enabling the digital transformations of our lives, the resiliency of our business model, and the return value to our shareholders. We believe the secular factors driving our industry demand that we identified at last year's Investor Day are as relevant now as they were then, and they'll help enable us to achieve our 2023 financial targets. At the same time, our strategy of driving diversified growth with strong long-term operating leverage should yield consistent returns for our shareholders. And with that, I'll turn it over to Bren.

Thanks, Rick, and good afternoon, everyone. KLA's September quarter results once again demonstrated both the soundness and strength of our ongoing strategy. We continue to exhibit our ability to meet customer needs and expand our market leadership while growing operating profits, generating strong free cash flow, and maintaining a robust capital return strategy. Total revenue was $1.54 billion. Non-GAAP gross margin was 62.1%, at the upper end of the guided range for the quarter of 60.5% to 62.5%. Non-GAAP EPS was $3.03, at the high end of the guided range of $2.42 to $3.06. GAAP EPS was $2.69. Gross margin at 62.1% was 60 basis points above the midpoint of guidance, as higher semiconductor process control product mix, lower inventory reserve requirements due to strengthening demand, and services leverage drove the upside realized in the quarter. Revenue for the semiconductor process control segment, including its associated service business, was $1.27 billion. In terms of approximate customer segment mix of process control systems revenue to semiconductor customers, foundry was strong as expected at 59%, logic was 10%, and memory was 31% in the September quarter. Within memory, the business was split roughly two-thirds DRAM and one-third NAND. Revenue for the specialty semiconductor process segment was $89 million, down 11% sequentially but up 29% year-over-year. Demand in this segment is driven by growth in RF, MEMs, and advanced packaging. PCB, Display, and Component Inspection revenue was $181 million, down 10% sequentially but up 1% year-over-year. In terms of balance sheet highlights, KLA ended the quarter with $2.04 billion in total cash, total debt of $3.45 billion after retiring $50 million outstanding on our revolving line of credit, and a flexible and attractive bond maturity profile supported by investment-grade ratings from all three agencies. From a cash flow and capital returns perspective, free cash flow was $456 million in the September quarter, free cash flow conversion was 96.1%, and free cash flow margin was 29.7%. For capital returns, over the past 12 months, we returned $1.3 billion to shareholders or 82% of free cash flow, including $542 million in dividends paid and $789 million in share repurchases. During the September quarter, we repurchased $188 million of common stock and paid $141 million in dividends. As it relates to guidance, our view for WFE growth this year is approximately 10%, growing off a baseline of $52 billion to $53 billion in 2019. Given this and our outlook for revenue growth in the calendar fourth quarter, KLA is once again in a position to outgrow our industry. Looking forward, based on our current backlog and sales funnel visibility over the next couple of quarters, we are encouraged by the sustainability of our current demand profile for the first half of calendar 21. We will have more to say about our views of 21 WFE in our January earnings report. Before turning to our specific December quarter guidance, we'd like to comment on the current trade situation regarding the United States and China. As you all know, in the September quarter, the US Department of Commerce stated that SMIC may pose an unacceptable risk of diversion to a military end-use in China. So we must obtain an export license prior to shipping certain systems and spare parts to SMIC and certain related parties that are subject to the US export administration regulations. This new license requirement did not have any effect on any shipments in the September quarter. We are complying with the new rules and have already applied for licenses for expected shipments in the December quarter. Given the expected level of business in the quarter subject to license requirements, the result of the license requirements will not have a material impact on revenue. As a result, we have made no adjustments for this situation to our plans or guidance ranges. The trade situation remains fluid and we've done our best to give you our perspective on the impact to our business, and we’ll refrain from speculating on the situation further. Our December quarter guidance is as follows: total revenue is expected to be in a range of $1.585 billion plus or minus $75 million; Foundry is forecasted to be about 52% of semiconductor process control systems revenues for semiconductor customers, depicting the strength we continue to see amongst the foundry customer base; Memory is expected to grow to be approximately 37%; Logic is expected to be about 11%. We forecast non-GAAP gross margin to be in a range of 61% to 63% as we expect similar product mix and services leverage as in the September quarter. The market reception to product offerings in our semiconductor process control business has been strong, and as outlined at our Investor Day last year, the company has made solid progress in our plans at driving costs and efficiencies on new product platforms and leveraging scale derived from our worldwide service infrastructure. In addition, better than modeled gross margin improvement in acquired businesses is a tailwind to our gross margins overall. Other model assumptions include; operating expense of approximately $380 million, interest and other expenses of approximately $42 million, and an effective tax rate of approximately 13%. Finally, GAAP diluted EPS is expected to be in a range of $2.59 to $3.23 and non-GAAP diluted EPS in a range of $2.82 to $3.46, or $3.14 at the midpoint. The EPS guidance is based on a fully diluted share count of approximately 155 million shares. In closing, KLA is executing well with increasing confidence that we are on track to meet or exceed our 2023 target model, both in terms of top-line growth and profitability. Growth in semiconductor revenue looks compelling over the long run with solid demand across end markets and at multiple technology nodes. We are encouraged by the strength and resiliency of the KLA operating model, which guides our strategic objectives. These objectives fill our growth, operational excellence, and differentiation across increasingly more diverse product and service offerings. They also underpin our sustained technology leadership, deep competitive moat, and strong track record of free cash flow generation and capital returns to shareholders.

Thanks, Bren. Priscilla, I think we're ready for you to queue for questions, please provide instructions.

We'll now take our first question from John Pitzer with Credit Suisse. Your line is open.

Congratulations! I just wanted to follow up, Bren, on your commentary around China. You said the results of licenses will not have a material impact on the December quarter revenue. Is that because you've already adjusted for it in your guidance or you just don't think that most of your shipments to SMIC require a license? And in that same vein, just given that China continues to be extremely strong, I think one of the key investor concerns out there is that the fear of bans are causing customers to pull forward. I'm wondering if you could just talk a little bit about the mix of your China business between domestic and multinational and kind of that concern of pull forward?

On the SMIC situation, we have applied for licenses for the December quarter where we think they are necessary. To provide some context, SMIC is an important but not a particularly large customer for us. Over the past six months, we have been discussing broader investment opportunities, and they have been a part of those discussions. There are likely timing factors influencing how other customers are approaching their business throughout the year. When we review our reports from the September quarter, where we saw no impact, and look forward to the December quarter, we have applied for licenses where we think they are needed. Overall, we do not anticipate a material impact on our revenue expectations for the quarter, so we did not make any adjustments to our plans. Regarding your second question, it is quite challenging in our business environment. Demand has been very strong overall, and when a customer attempts to pull in a delivery, it takes a slot away from another customer. Given the current demand, most customers are adhering to their slots, and we have not noticed a significant change. We remain consistent in our shipment outlook for the year at around $800 million, which is more heavily weighted towards the second half. Thus, we haven’t observed a notable change in customer behavior concerning our products.

And we will take our next question today from Harlan Sur with JPMorgan.

Great job on the quarterly execution and strong results. On the innovation and new product front, there's a good correlation in years where the team rolls out new tools and platforms and then the forward revenue momentum for the next few years. Last year, you guys I think launched about 10 new tools or platforms, second iteration of your Gen5, your new X-ray metrology platform, e-beam inspection platform and also your multi-column e-beam inspection for mask inspection, just to kind of name a few. Are these platforms contributing to the incremental upside in revenue performance this year? And how many new platforms do you guys have in development and/or will be introducing over the next 12 months?

These programs are at various stages in their life cycle. We have seen contributions, such as with the print check for EUV on the BBP platform, which has seen continued demand. However, some products like the X-ray metrology and the multi-beam reticle tool are not significantly impacting revenue in the short term, though we expect them to drive growth in 2021 and beyond as part of our 2023 plan. We have a number of significant investments underway, but they are in different phases of introduction. We're confident that the programs we have are aligned to support our 2023 objectives. There have been challenges, including some related to COVID, particularly early on, which affected our execution. Nevertheless, we believe we have made considerable progress in managing these issues and feel positive about our current position, which is why we believe we are on track to meet or exceed our 2023 plans. Bren, would you like to add anything?

Harlan, I think one of the things that we're pretty excited about is that over the last year or so, we've introduced platforms in a lot of our core businesses. Those platforms have had really strong market perception. We think you mentioned Gen 5, but also new iterations of the Gen 4 product line and customers mix and matching across both tool sets and supporting a wide variety of designs and different process flows, which has been great for the business. But new laser scattering offerings, you mentioned e-beam, we have a new e-beam inspection product. The portfolio strategy of the company, as we connect those tools and leverage common interfaces and common algorithms, common software, has been able to provide a pretty competitive offering out there in the marketplace. And so we've been able to maintain our share. We grew share in 2019. We think we're going to maintain that in '20, maybe improve it a little bit, and been able to do it at very strong margins. So certainly, growth in the overall business is a factor there, but also the product position is a factor. So we're pretty pleased with what's out in the marketplace. And to Rick's point, we've got some new things coming down the pipeline that hopefully will drive our performance against our '23 targets.

We will go next to C.J. Muse with Evercore. Your line is open.

I guess I was hoping perhaps you could speak a little bit about the confidence that you have on sustainable spending in the first half of '21. And in particular, I would love to hear your thoughts around foundry and logic contributions. And as part of that, if you could touch on what impact, if at all, you might see if we see greater spend on 5-nanometer versus 3-nanometer at TSMC? Thank you.

As we said in the prepared remarks, we had very strong backlog coming into the quarter. We had a positive book to bill this quarter. And if we look at the funnel of expectations into the December quarter, just the overall order outlook as we look into December and into March and then the backlog position we believe will take into the year gives us some confidence of sustainability of these business levels. While it's early for us to spend a lot of time sizing '21, and we'll have more to say about ‘21 in the next earnings call in January, that overall position gives us confidence that we'll see some sustainability here. From a foundry/logic point of view when you look at the overall market, and there are puts and takes there. But we are pretty confident in the fact that foundry/logic looks like it has sustainability as we move into the first half of the year; I don't see it changing. Obviously, quarter to quarter, there's always fluctuation. But in general, feel very good about the profile of that business as we move in the first half.

Just one thing to add, C.J. I think one of the beliefs in our investment thesis on some of our new capabilities, for example, EUV print check, was that we were going to be highly relevant in the advanced nodes. But of course, people really hadn't hit much volume. So we've really seen proof of that concept. And we're getting a lot of customer pull for capacity and capability to support those ramps, and it's not just at one customer. So we feel very good about the process control intensity expectations that we had going into these nodes. We're seeing them being realized. So we view that as another positive indicator, not just on the overall foundry spend, but on the process control related spend.

We would expect Gen 5 to have some growth next year in wafer starts, and we also expect to see some, what we call mini line risk production type investment on N3 more towards the middle of the year end, into the second half.

Thank you. And we will move to Krish Sankar with Cowen & Company. Your line is open.

I had a question for Rick or Bren. You guys mentioned in your prepared comments memory should see growth next year. I understand you're going to give more color in January. But just within that context, how would you expect KLA revenues to trend? The reason I'm asking is there's a general view that within the memory vertical, KLA has more exposure to NAND than DRAM. So I'm kind of curious to hear your thoughts on '21 memory and KLA's performance.

Since around mid-2018, our memory customers have been exercising very disciplined spending. This trend has persisted even after a significant decline in 2019, leading to a stable year in 2020. We anticipate a modest recovery in the December quarter, as indicated by our recent disclosures, and expect this to continue into the next year. The overall pricing environment, along with factors such as the recovery timing in smartphones and data centers, will influence the memory market. The introduction of EUV technology into DRAM may also play a role as we approach the second half of the year, giving us a sense of hope for an improved memory business in 2021. I believe the discipline in spending will remain, and as pricing starts to recover, we may see increased investments, though expectations for growth are modest and depend significantly on market dynamics. Currently, process control intensity is somewhat higher in 3D flash compared to DRAM, but the introduction of EUV in DRAM presents an opportunity to enhance process control. We are optimistic about this potential as it unfolds. Additionally, with increasing stack and layer counts in flash, we foresee more opportunities for our metrology product lines. We're also introducing new products, including e-beam inspection tools, which we believe will create opportunities for us to enhance intensity or increase market share. Overall, we feel positive about these prospects.

And we will move next to Joe Moore with Morgan Stanley. Your line is open.

Sorry to go back to this, but I just want to make sure I understand the SMIC situation. Are you saying you didn't have exposure in the September quarter? And then, I guess, as you look at these rules, is there sort of an equal impact whether you ship out of the US or whether you ship out of Israel or Singapore?

In the September quarter, the change or the notification from the government came in at the very end of September. So there's no impact in the September quarter. As we look at the December quarter, as I said earlier, when we have to apply for licenses, we've applied for those. We don't think that the granting of those licenses within the timeframe we're talking about will have a material impact on the business.

And is there a difference as to where you ship out of it? Is it a different licensing process, whether you ship out of the US or from a foreign location?

There isn't a licensing requirement that comes from a factor.

And we will move next to Patrick Ho with Stifel. Your line is open.

Rick or Bren, in terms of your PCB business, it's actually had a few strong quarters and you mentioned that 5G has been a big driver. You've given us the roadmap and a lot of the development on the process control area. Can you just talk about, I guess, the product roadmap on that business and because these types of tools typically have a long lifespan, when do you feel the need to call refresh and upgrade for this next wave of line that's being driven by 5G?

It's a great question. The answer is, we're relatively new to this business. So about a year and a half year, very impressed with what the Orbotech team had been doing. I think in conjunction with them, we're really working hard to make sure we have the right amount of investment to continue new products meeting customer needs. I would say that they had great engagement, and we've added that. As a result, we're investing heavily in that business to make sure that we're meeting some of the emerging demand, the flex PCB and all the new substrates, all the things. This is the beginning, as you know, of the 5G. We think there's a continued opportunity for system growth over time, so we're very bullish on what that team has done. In combination, we think it's been a tremendous success so far and a lot of upside as we go forward. Like KLA businesses, it requires continued investment in new capabilities and we're doing that right now.

And we will move next to Timothy Arcuri with UBS. Your line is open.

Bren, I had a question about your Semi Systems business. If I sort of take your prior comments about the PCB and the Display business for calendar half-on-half, you said it would be down half-on-half. So that would imply that segment is sort of at best flat for December. It seems like Semi Systems have to be up about 5% to like 9.35 to 9.40 for December? So I guess, A, is that right? And B, assuming it is, then your systems for the year are up about 10%, which is about in line with where we think WFE is? Yet you said that you're outgrowing the market. So I just wanted to see if you can fit those comments. Because it doesn't seem like you're really gaining WFE share this year, and you didn't gain anything last year either in a period where we've seen pretty big mix shifts toward foundry/logic. So I guess, can you sort of speak to that? Thanks.

A few questions in there, Tim, and I'll try to answer this for you. Yes, I mean your conclusion around December sequential Semi Systems is right, mid single digits. Obviously, we run the business at a total company level. In terms of our expectations, it looks like it's sequentially a bit single-digit growth here. When you take in aggregate, you add all that up that with our semi systems, probably somewhere in the neighborhood of about 15% growth year-over-year against a market environment that's 10%. So that's an outperform. If you look at last year, WFE was down about 7%, and our Semi business was up 1%. So that's an outperform to 2019. So we can spend some time with you on the math on all of this, but that's how to think about your questions.

Thank you. We will go next to Atif Malik with Citi. Your line is open.

Rick, if I look at inspection and measurement, industry sales attach rate to lithography sales historically makes a new high as the industry introduces newer wavelengths. As you look at EUV now since introduction at 7-nanometer growing to 26 steps at 3-nanometer and some introduction at DRAM. Do you think the defect challenges associated with EUV remains a tailwind for your process control business or leveling off?

I think it's a good question. What we've seen so far, as you know, we're relatively conservative, but we have had indications, and we believe earlier in EUV that we would see increased penetration of our advanced optical tools as well as in the mass shop. That's really playing out. We do model process control intensity going up as a result of increased EUV adoption. Part of why that's working for us is, I mentioned EUV print check. That's essentially kind of a new category where we're able to deploy additional BBP tools to support the ramp of EUV. As you might imagine, those wafers are incredibly expensive, so there's a real focus by our customers to make sure that they're obviously optimizing their yield and catching excursions. At the same time, the size of the defect is becoming more relevant and smaller defects. Our tools end up having to run in modes where they capture smaller defects with increased algorithms, which also means that the capacity needs increase as the design rules go down in order to cover and detect. Yes, I would say that those are both tailwinds, and our customers tell us that because they're very ambitious about ramping the advanced nodes and wanting to make sure we're in a position to support them. Does that answer your question?

We will go next to Quinn Bolton with Needham & Company. Your line is open.

I wanted to first ask just the patterning business, up 21% sequentially. It looks like it had a pretty strong quarter. Wondering if you could highlight sort of what areas within pattern really drove that growth? And then I've got a follow-up.

Patterning overall, we had a strong quarter in reticle inspection. So quarter to quarter, that was the biggest driver.

Do you expect that to continue, or is that a fairly lumpy business?

Well, it's big ASPs. And so it's low integers and big ASPs. And so depending on timing, it does tend to be lumpy. Overall reticle inspection, because of the number of design starts in advanced foundry has been a really strong business for us. So when we look at it overall, it was a very strong year in '19 and '20. It’s down a little bit from '19 in that business, but still pretty strong. So I think those drivers will continue. As we move into next year and we start to move into some of our offerings to support additional EUV activities, we should see some contribution from there as well. But reticle inspection was a driver. But to your point, it is lumpy quarter to quarter.

Follow-up question, just ASML, in call you talked about some modulation in its EUV system deliveries given no transition timing of some of its customers. Wondering if you look to next year, do you see continued growth in EUV print check, or do you expect that to perhaps soften for some period of time?

I wouldn't say softened. I mean, the challenge that customers have with EUV print check is into new applications, there are new algorithms. There’s new defects that they've got to run down and do source. There's a huge appetite to get that. In fact, we're getting a lot of pressure to get systems that were forecast delivered to support that. There are additional algorithms, as I said, we're developing. All indications we see are an expanding opportunity for EUV print check, and I think that will go for some time based on the early indications that we're getting.

We'll go next to Vivek Arya with Bank of America. Your line is open.

I wanted to dig into the gross margins and your operating margins; both were above your longer-term planned for September. I believe the midpoint of your guidance says that they can sustain at these levels. I'm curious, how should we think about the trajectory of these margins going into the next several quarters? Can they sustain at these levels or do you think that there was anything abnormal, whether it was COVID or mix-related that helped you? As kind of part B of that, it was good to see you restart the share buybacks, but the levels are still somewhat below what you have done in some prior quarters. Any color around just the sustainability of margins and how you can reaccelerate share repurchase would be very helpful. Thank you.

On gross margin, as I said earlier, we've been very pleased overall with the product positioning overall and the pricing related to that positioning. So that's been a good thing for our business. I mentioned operating leverage in Service. With the growth of the Service business, the utilization rates in the installed base that one thing with consolidation in the industry allows you to really drive good utilization across your resources. We've invested in infrastructure over the last few years, and we're starting to see the benefits of that now. We are getting a tailwind too in our EPC group related to acquisitions that the acquired businesses are doing better from a margin point of view. So there's a number of factors that are driving. If you look at our long-term plan, we talked about 60% to 61% at these revenue level type gross margin performance. I would expect us now to be somewhere between 61% and 62%. You do have mix factors in any given quarter. There is probably a good point here of sustainability versus the model that we had. If you take it down to operating margins, I think we're underspending our normalized spend levels just because of some COVID constraints around travel, but also how quickly we can hire people and so on. I think that the spend level is probably understated a bit when compared to what normalized would look like. I think there is a point here that drops through that has sustainability to it. Mix issues notwithstanding in any given quarter. On the buyback, we start with a principle in terms of how we look at the overall capital structure of the company and then how we allocate that capital. So we start with a cash target of $1.5 billion to $2 billion. We're operating within our target range today. Most of our buybacks or returns generally are funded through ongoing cash flow. It was a little bit lower in this quarter compared to the March quarter. As you look at that and we look at our go-forward expectations around cash flow, we would expect it to be roughly around these levels on an ongoing basis. So somewhere around $200 million plus or minus. It's a systematic approach that we run through. We have some opportunistic possibility around that, that we can work around it. It tends to be much more principle-based than anything else. We're going to return at least 70%. We returned 82% in the last 12 months. We're going to return at least 70% of the cash flow we're going to generate through share repurchases and dividends, pretty balanced across the two.

Thank you. Blayne Curtis: I just want to revisit prior question on memory. You mentioned in your letter, customers were looking for higher bit growth to meet demand. Just any more color where that demand is coming from? I know you don't want to guide for memory next year, but just any color on what type of magnitude outside you're seeing?

Well, like I said, we're optimistic. We see some improvement in the December quarter, and I think that continues as we move into next year. Most of it is coming from customers supporting 5G and handsets, we think that's probably the biggest driver. It's pretty modest growth at these levels just given where the industry has been, but we're optimistic that we'll see growth as we move into next year.

Thank you very much, Priscilla, and thank you, everybody, for your questions and your interest. We will be talking to you shortly during the quarter during our virtual investor event. This concludes the call.

This concludes today's KLA first quarter 2021 earnings call and webcast. Please disconnect your line at this time, and have a wonderful day.