Executive readout · one minute
Webcast research workspace
Read the call alongside every captured source. Transcript, audio, slides stay in one workspace.
Conference · 2026-09-09
You came from your AI assistant. Add Equibles to it and ask about this data directly, free.
Executive readout · one minute
Read the call alongside every captured source. Transcript, audio, slides stay in one workspace.
Research coverage
3 live sources
Switch sources without leaving this page or losing your listening position.
Open the source you need; every reader stays inside this workspace.
All right.
Good morning, everybody.
Welcome to the Jeffries Industrial Conference. My name is Albert Illini. I work on the metals and mining research team here, and I'm joined today by Reliance's CEO, Carla Lewis, and COO, Stephen Cook. And, yeah, so this is going to be a fireside chat. If anybody has any questions, just feel free to raise your hand, and we'll come over and give you over a mic. But maybe, Carla, I'll start pretty high level. Just, you know, maybe the state of demand you guys are seeing for your products, you know, during two-quarter earnings, more so on the mill side of things, I think they painted a pretty positive outlook, you know, seeing some green shoots, more so in construction and later then markets, you know, new age kind of construction, data centers, things of that nature. So maybe what you're seeing more on the downstream side of things, service center side of things, yeah, if you could just maybe walk through some of your demand and markets, what has been strong as of late.
Great, yeah, we'll dive into that, and first off, you know, thank you all for being here this morning. I'm guessing none of you were at the tennis match last night because you made it into the meeting today, and thanks to Jeffries and Albert for asking Reliance to be here. So, as Albert mentioned, we are a metal service center company, so for those of you not familiar, we buy from the major producers, primarily here in the U.S. We're the most diversified from a product mix and market exposure standpoint and the largest service center in North America, so we cover a lot of different products and end markets. It's overall, we would agree with the mills. The mills are very bullish. We typically follow what they're seeing in demand, and we also typically, we service a lot of smaller orders. At Reliance, with $15 billion of sales, our average order size is about $3,000 in order, so we're doing several transactions, 40% of our orders, customer calls us today, we deliver tomorrow. We also do sell into some, you know, larger projects and larger OEMs, and then at a high level, and then I'll let Steve talk a little more specifically on the markets. At a high level, as I said, overall, pretty bullish carbon steel products, a third of our business, non-residential construction and infrastructure, Thank you. We actually don't sell metal directly into the automotive end market, but we process and ship a significant number of tons to the auto OEMs on what we call a toll processing basis, where it's customer-owned material. So we don't take possession of the metal, so we don't have metal price risk, and we don't get squeezed on profits, on margins by the OEMs, and we're able to participate meaningfully in that market with the mills as the producers, as our customers, and we charge a fee to process the metal, to handle the metal, to store the metal, to deliver the metal, et cetera. And that's been a very profitable way for us to participate in the automotive market. But, Steve, if you could maybe talk about some of the end markets.
Yeah. Thank you, Carla. So, basically, when people ask us about which end markets are strong, which are weak, there's a lot more strong, many more strong markets than weak markets. We used to point back to ag and semiconductor and some other markets that were lagging, But it just seems like everything seems to be, you know, really coming to the forefront. There's a lot of products that are in short supply at our mill supplier's level, which might make some of our customers who are on the sidelines come out and try to make sure that they secure those products. Copper products for electrification and data centers, copper bus bar, aluminum plate is in short supply, and many carbon products, whether it's structural tube, sheet. We have wide-flange beans, which are the highest price they've ever traded at, and supply is basically on allocation into 2027, and there's carbon plate that has recently become more scarce. So we feel like our customer base, we serve all markets. We have 320 locations, mostly in the United States, but we're in Canada and Mexico and Asia and Europe also. Everybody's trying to get their supply, and fortunately, our model is 95% domestic suppliers, and we have some really good relationships with them, and they're doing a really good job, making sure that our customers have what they need, no matter what the end market is.
Yeah, and I think just in that, you know, a little specifically data center electrification around, it continued to be strong. On the non-res side, we've seen a lot of, you know, schools, hospitals, public infrastructure, airport type of business over the last couple years, and we continue to see the activity there on the non-res side. Automotive continues at healthy levels. For us, we haven't really seen a dip. We continue to have opportunity for more demand there. As I mentioned, general manufacturing, fairly broad-based. As Steve said, ag probably, you know, the one lagging, but we're starting to see a little activity there. But, you know, consumer products, industrial machinery, most of that, the heavy equipment, construction equipment, we've seen those pick up. Aerospace has been picking up. There's been some excess inventory in the supply chain that's being worked through. There is still some there, but for a lot of the products we sell, that has been worked through. So with the higher build rates now and the, you know, multi-year backlog, we're very positive on aerospace going forward, as well as semiconductor, we were lagging a bit, but we're starting to see that pick up as well.
Okay, and then, you know, maybe getting more into the weeds on steel versus aluminum, but I think that kind of goes into my next kind of question, which was on the tariff front. And obviously, we've had a little bit of ping pong related headlines lately, with the potential reduction on tariffs in Canada, 25%. You know, I think there's also maybe some more optimism out of Mexico that they maybe can get something similar done. I mean, you know, again, and I think we've seen with the current administration, the reality might be very different than what the headline ultimately reports, and, you know, that initial headline said, you know, it could be based on different products, but just, I guess, how would a reduction to 25% in Canada kind of affect your business, and especially, I guess, on the aluminum side of things, just given we import so much primary aluminum from Canada in recent years?
Yeah, and, you know, this is kind of uncharted waters, so we don't know exactly what the impact would be or how that would happen or play out. But, you know, in general, we think a trade deal in North America with Canada and the U.S. would be positive for trade flow and for activity levels. On the steel side, and also, I think a lot of that is dependent upon what each of those countries, how they handle their overall trade policies, including countries outside of North America, and if they limit some of the metal, the import that was coming in to each Canada and Mexico and then making its way to the U.S. So, we... We're hopeful that they have protections in place there to prevent some of that from happening, which I think is probably part of a trade deal. As Albert mentioned, particularly on the aluminum side of things, last year when the tariffs were announced, the U.S. aluminum producers who we buy from, they bring in about two-thirds of the primary alumina from Canada. So that was immediately hit with the 50% tariffs, and that created some disruption in the U.S. market. Prices went up very high immediately because the tariffs were real. There was not strong underlying demand at that time to support customers paying higher prices. There was a lot of kind of pre-tariff aluminum in the system, and it was pretty readily available. So there was a bit of a hit to margins. Customers were not buying and not buying at the full tariff-costed prices a little over a year ago. Since then, demand has improved for a lot of those products, and so we are seeing now the customers are paying our markup on the base aluminum price. They're paying the tariff, but they're not paying our markup on that. And the other behavior it caused at our customer base last year was both our customers and other service centers really skinnied down on their inventory because everyone was concerned there was going to be a trade deal with Canada any day, and their inventory would be immediately devalued, and they didn't want to get stuck holding that. Also, a lot of our smaller customers and competitors have to worry about credit lines, and with prices as high as they are, they're very hesitant to hold any extra aluminum inventory, and there's still the concern that if the tariffs do get reduced, that there will be a devaluation. We saw a little bit with the rumors or the talks the other week where there was a little bit of a pullback on aluminum pricing, but there's more to go if there would be a trade deal. I think at Reliance, we're better positioned than most other companies because of our size, that if inventory, if aluminum prices go down, we can stop buying from the mills and basically supply each other and get rid of that high-cost aluminum faster than most other of our competitors to protect our margin, hopefully a little better than others in a declining price environment. I'll, Steve, if you have anything.
Yeah, I would just add a few weeks ago when there was talk of reducing the tariffs from 50% to 25%, you saw the stock prices drop a little bit. Canada has been a supplier to the United States for the last 30, 40 years, as long as I've been in the business, and to buy material from Canada, you can get it within days or weeks, as opposed to if you're buying from Europe or Asia, where there's a longer time to get the material. So, if they are going to hit our market again, like they have in the past years, it will help with some supply for some of our customers, but... We've found that Canada staying where they are and being a little more restrained has been good for our industry, good for our mill suppliers who have invested billions and billions of dollars. So if the tariffs are reduced, I think that some sort of quota system would maybe keep things normalized so our domestic mill suppliers can continue to invest in our industry.
Maybe just think deeper there on that quota system. So I think if you look at market expectations for steel prices next year, right, I think there's some type of trade deal within North America kind of embedded there. And I think that's been kind of the base case expectation, just given how intertwined those industries have become after Trump gave them the original exemption, I believe, in 2020. So, you know, we've argued that the real risk is, like, this is, you know, maybe a first sign of a crack in the administration and if it's a sign of things to come. So, you know, just based on maybe what you're hearing high level, you know, do you think, you know, there's risk that maybe Europe or Southeast Asia or other kind of nations could see some type of reduction to 25% or even some type of quota system like you just mentioned, Stephen?
Yeah, I mean, it's hard to speculate what the current administration might do, but generally, you know, this administration and even the Biden administration have been favorable from a trade perspective to the metals industry. So we don't see, you know, and I know, Albert, you didn't suggest this, we don't see Section 232 going away, but certainly there could be some modifications to the current tariff levels. And, you know, generally, as long as, if we still have Section 232, I think it's favorable for the metals industry and provides a lot of protection we need. But generally, prices, you know, probably would come down. That's what we've seen in the past. But they would still be at healthy levels. I mean, we're at elevated levels on a lot of products now. And, you know, we can still be very profitable. We like the higher prices. We make more money when prices are higher. But we can still be, you know, very profitable, even if there is some, you know, modest reduction in overall metal prices. And we could see some more activity if prices come down a bit.
Yeah, I would say that one recurring theme with our mill suppliers is they're aware that they don't want to give the administration an excuse to start, you know, trying to promote more material coming in from offshore. So, prices are high, lead times are extended, but they're trying to balance that to make sure that they're able to fill material requirements for vital jobs, and, um... Add more capacity, so the customers and users aren't going to the administration, you know, asking for relief, so it's a balance, and I think they've done a really good job of, you know, keeping all parties, you know, in business.
And then maybe just the last one I had on the tariff side of things. You know, we've seen kind of imports take up from the low in March. I think flat rolled imports are near double where they were in March currently. And just, you know, given, you know, some of the, I guess, elevated freight and insurance costs as a result of maybe the war, excluding that, you know, we've calculated that kind of that import arbitrage spread is near the highest level it's been outside of like post-COVID. And, you know, 10 plus years. So, but you really haven't seen much move in the price. So I think maybe that's maybe a sign of demand is indeed improving at the margin. But anything to call out in terms of maybe you guys are seeing customers, you know, willing to pay the, you know, higher domestic price for a security of supply or a maybe cleaner steel, right? Maybe some carbon concerns with imported steel.
Sure. Our customers who are, you know, building equipment or making data centers, they just want to make sure that they have their material. So as long as they know they have a secure supply, they're not as price sensitive as they have been in past years. Yeah, like I said, they've asked for maybe to go offshore, but it's a conversation we have between our mill supplier, the customer, and us to make sure that we're able to solve their problems without making drastic purchases. I don't think a lot of our competitors, they don't have the 95-5% balance that we have. It's more 50-50, and I think that that hasn't served them well. I think they're trying to do more domestic, and I think that is the trend. And, you know, I don't think that it's a smart play to go. Take a bigger position overseas.
And then if there's any questions in the room, just raise your hand. But I guess, yeah, moving on more maybe to specifically the service center and Reliance specifically, I guess this is kind of a combined question in one, but one, just maybe you want to talk about what you're seeing with your market share gains since initiating that kind of growth spending cycle. I think that began in 2021 that was really spearheaded by M&A, and then maybe some of the other consolidation we've seen in the service industry over the past 12 months and how that's affected your business and I guess maybe the opportunity you see going forward for further consolidation in the market.
Okay. Yeah, and a lot in there. So Reliance has grown significantly over the years, quite a bit through acquisitions. Since our IPO in 1994, we've completed 76 acquisitions. We typically look for good, you know, profitable, well-run opportunities, companies out there, bring them into Reliance and, you know, strategically growing our product portfolio value-add processing. And so a lot of Reliance's growth came through those acquisitions. Really in around 2015 or so, we started to see the processing equipment that we use really advance and have better capabilities so that if we invested in that equipment, we could provide more value to our customers. And at the same time, a lot of our customers were wanting to reduce the amount of in-house processing. But we do, like, first and second stage processing, change the size and the shape of the metal. And so they were asking us to do more for them. They wanted to do more, you know, design and assembly. And so it played well that, you know, we were investing significantly in the equipment. And we were picking up more activity, especially on the processing side, but we, at that time, Reliance, we wanted to focus on quality of earnings, and so we actually reduced our volumes. We were making more money at the time by going after only the highest margin business, but then a few years ago, you know, Steve and I said we started talking about what we call smart profitable growth, keep all of that high margin business, we really like that, but there's a lot of other good business out there that's profitable, and especially if prices decline, we need more of that volume with inflation to cover our expenses. So we've been growing quite a bit organically, taking market share over the last three years. We've been outpacing industry shipments by a couple percentage points every quarter for the last two years, I think, with that focus on picking up good volume business. We're getting better leverage on the operating expense line. So we're continuing, and in 2025, we did not complete any acquisitions, but we grew our tons shipped by over 400,000 tons on us shipping about, you know, six to six and a half million tons a year. So it was pretty significant organic volume growth last year, and just because we did not complete any acquisitions last year does not mean that we were not actively looking and in processes, but again, we try to buy good, profitable companies, but at prices that make sense to us, and there have been, in our opinion, some inflated views by sellers and maybe their bankers on what the value You should be. So sticking to, you know, our kind of disciplined approach, we did not complete any, even though, as Albert mentioned, there were some, have been some, has been activity, continued consolidation activity. We think that consolidation will continue. You know, Steve's talked about our mill suppliers. They're growing. They're looking for people to partner with them. Customers are consolidating and growing. They're looking for those secure supply chains. This change the sustainability of their suppliers. So we think, you know, consolidation will continue as far as there have been two, you know, larger public service center company transactions in the last 12 months. And, you know, to the extent that that brings more pricing discipline to those companies because they've each taken out a competitor, that would be positive for all of us. We'd love to see them be more disciplined in the market. Also, you know, there's always disruption around mergers and consolidations. And so, you know, we've benefited from picking up some customers, picking up some of their employees as they work through the consolidation.
Yeah, I mean, you did a good job covering that. Carla mentioned the mill suppliers. As Nucor opens up a mill in West Virginia, Steel Dynamics continues with their aluminum mill in Mississippi, and you have a lot of foreign entities adding new capacity. It'd be silly for us to have, with our footprint, not to grow alongside our suppliers as our customers continue to ask for more products and services, and our 16,600 employees. We are happy to work overtime and be part of a growing business, so I think that we made, like Carla said, 76 acquisitions. It takes time to put all of those together and strategize what you're going to do with them, but I think that we have a great team, great culture, great chemistry out there, and we're growing, and we're going to continue to grow alongside our mill suppliers and customers.
That was a good point, Carla, on the consolidation, giving more pricing power, because I think that's exactly what we've seen on the mills side of things, right? Maybe post kind of Cliffs becoming an integrated producer with Cliffs and USDO kind of having that integrated pricing power for maybe some of the higher grade auto blends, and then CMC and Nucor on the rebar side of things. So I definitely agree there. And correct me if I'm wrong, but is – The service industry is still pretty fragmented, right? Where I think it from your last deck was an 18% market share you guys have so there's plenty of room for further consolidation. Yeah, yeah. Okay. Question in the room.
You heard me.
I did. I heard you, yeah. And the question was about the fact that in the second quarter of 2026, we did not repurchase any shares. That should not indicate anything. We have not changed our approach on capital allocation or repurchasing shares. We take an opportunistic view, and, you know, each quarter we enter the market at the levels we think are appropriate. And so in the second quarter, There was a big run-up in our stock price from where it was when we entered the quarter, so we were not in the market during that quarter. But, again, our approach stays consistent. We expect to be in the market opportunistically going forward. There was speculation that because our working capital increased that that kept us from repurchasing. That's not the case. We have plenty of liquidity to be able to be executing on all of our capital allocation priorities, whether that be organic growth, M&A growth. We continue to pay and consistently increase our dividend rate and then also our repurchase shares. So it just so happened that we were not in the marketing queue, too, but no change in strategy.
I guess, yeah, so I actually was going to segue into kind of capital allocation, you know, just given kind of the free cash flow profile and maybe the coming free cash flow profile if we have a, you know, a multi-year period of the elevated kind of tariff regime. But I guess, you know, just what you mentioned there on buybacks. Of course, you know, you want to be strategic and opportunistic with that. But I guess any concern that maybe, you know, if you guys aren't in the market buying shares, is that maybe, you know, a read through to investors like that? Hey, if the own company maybe isn't buying their own shares at the current level, why should we?
Yeah, and that should not be the read-in, of course. You know, as I said, you know, we monitor where the stock is trading when we enter the quarter and set some targets at that time, and, you know, we also don't know that our shareholders want us buying at peak levels. What is peak? It's hard to tell these days because of all the volatility that's out there in the stock price, but, yeah, we understand that could be potentially implied. As I said, just the whole market kind of bounced back pretty quickly in the second quarter of this year from an equity price standpoint, and we just did not anticipate it happening that quickly in the second quarter.
Makes sense. And then I guess just maybe one more on capital allocation. Just, I guess, high level, you know, the capital, there's no policy, right, in terms of a split between dividend and buybacks. Just maybe, I guess, you know, I think you already alluded to it, but how you think about that. And then just on the growth side of things, just I think you guys have a multiple where you would consider for M&A and just maybe how you gauge that versus organic growth.
Yeah, so from a growth step, from a capital allocation standpoint, you know, we do believe that investing in the right long-term growth of our business is the best use of our capital. So whether that's organically or, you know, through acquisition, you know, on the acquisition side, as I mentioned earlier, you know, we do look for good companies that are immediately accretive to earnings and cash flow. There continue to be a lot of companies out there, a lot in the fragmented industry, again, a lot of small to medium-sized companies, but many of those are growing. So we look at those opportunities and see, as companies become available, we look to see how they fit within Reliance. You know, are they going to provide the right returns to us? We typically, the way our kind of disciplined valuation, we look at the companies and come up with what we think a normalized long-term go-forward EBITDA level is for them and typically value it then at five to seven times. You know, in the market the last few years, it's been closer to the seven times. There haven't been many deals getting done at five times. But we try to stay, you know, pretty disciplined from that standpoint. On the organic growth, we also, for the larger CapEx items, we do look at, you know, payback periods, and that can vary depending upon the type of investment we're making, whether it's in, you know, a greenfield building or whether it's in equipment. But, you know, those opportunities come up from customer needs. They come through our operating entities. And then Steve, you know, works with our different companies to evaluate the opportunities and look at the ones that we think provide the right return levels. On our dividend, we don't have a formal policy, but we've been paying dividends for, I think, 66 years now, a quarterly dividend. We've never not paid it, and we've never reduced it, so we like to consistently increase the dividend. Typically, it's been on an annual basis to a level that's sustainable, so we can continue to always be able to pay that. And then, as we talked earlier, the repurchase activities on a more opportunistic basis.
Great. Thank you. And just a few more minutes here. If there's any questions in the audience, please just raise your hand. I guess moving into, I know working capital is a very large part of your business. And on the mill side of things, in the first half, we saw a lot of builds, partly due to the run-up in pricing, also due to some of the companies and some of their organic growth, like some ramp-up costs with steel-d and aluminum and things of that nature. But just maybe, you know, high level how just a reminder how working capital really impacts your business. And then maybe, you know, what you're seeing in the second half, just given pricing has continued to, to run higher is do you expect working capital to be a source of funds? Yeah.
Yeah, so generally with seasonality, we typically build working capital in the first and second quarters of the year, and then we see it start to decline in the third and fourth quarters. Basically, just because of number of shipping days, our shipment levels generally decline a bit in the third quarter and the fourth quarter, but that's absent, you know, increasing price levels. So we did see some inventory build. We carry about $2.5 billion worth of inventory. The way we monitor and manage our inventory is we have inventory turnover targets. So our overall consolidated turn targets about 4.7 times. Second quarter, we were a little above five turns, so turning a little more quickly. What we tell our companies to do is buy to what your shipment levels are. Each of our companies, depending on their product mix, has their individual inventory turn target. So we've been very happy with the way our companies have been turning their inventory. Our AR has popped up quite a bit, too, because of the higher pricing levels, and, you know, we manage that on a day's sales outstanding basis. That's remained consistent at around 41, 42 days. So we're very happy with the way our teams are executing from a working capital management standpoint and where those levels are. And if prices, if metal prices are going up, that's good for us. We generally, as I mentioned, get a gross profit margin of around 30%, so if we get 30% gross profit on $1,100 a ton as opposed to 30% on $600 a ton, we're very happy, and we have no problem, and, you know, we have no liquidity issues of our working capital continuing to increase as long as we're comfortable that we're managing it well. So second half of this year, typically we would see some working capital release, but if prices hold and continue to increase, if activity levels are stronger than normal seasonality, we could see it build, but we're fine if that's the case. And I don't know, Steve, if you have any comments on, like, suppliers and performance or anything with working capital.
Yeah, just in general, looking at the tons we have on hand compared to year-over-year, they're almost identical. Maybe they're up 10,000 or 20,000 tons, but the cost is much higher. Based on customer demand and what we're hearing from our 2,000 salespeople, the reports that they're giving us, we're going to continue to buy inventory into the third and fourth quarter. We don't feel like our customers are scaling back. Lead times are still extended, so I think that we're going to continue going down the path we're on right now.
All right, thank you. So I want to be conscious of your time. I know you have a meeting for this, but maybe just lastly, a high-level quick one. You know, I think on the mill side of things, we're seeing a lot of those companies, you know, take a different path to growth this time around, maybe recognizing that the current tariff regime might not be around in its full existence, you know, maybe during a new administration. So they're all kind of pivoting into their own kind of growth. Nucor more downstream, CMC as well. Just anything you see there maybe impacting your industry as maybe some of the mill players start to look more downstream.
Yeah, I mean, certainly we think that service centers have a valuable role in the supply chain, and obviously so do the producers, and we need each other, and we would like us all to respect that and recognize that. And I think for the most part, it's worked okay. A lot of the downstream value add that some of the mills have entered into and are talking about is a little different than the type of value add that we're doing. And so it's working, I think, well so far. And, you know, as I mentioned earlier, you know, Reliance, bread and butter, $3,000 in order. We put, you know, 15 different orders on a truck and go out and deliver it to our customers. That's not mill business. Like, none of them are set up and equipped, and I don't think they're going after that. Some of the larger projects, there can be some conflicts sometimes, but, you know, we try to work that out. We try to be a good customer to our suppliers and have strong relationships with them and look for opportunities to grow together.
Great. Well, thank you, Carla and Stephen.
Thank you.
0:01 to 35:24 · One card per analyst, follow-ups included. Each plays from its start, and the one being answered is marked.
All right.
Carla Lewis: Good morning, everybody.
Also speaking: Steve Cook, Speaker 1
Company presentation
36 pages · use arrow keys or swipe to navigate