Thank you for standing by. Welcome to Flex's Fourth Quarter and Fiscal Year 2025 Earnings Conference Call. Presently, all participants are in a listen-only mode. After the speakers' remarks, there will be a question-and-answer session. As a reminder, this call is being recorded. I'll now turn the call over to Mr. David Rubin. You may begin.

Thank you, Melissa. Good morning, and welcome to Flex's fourth quarter and fiscal 2025 earnings conference call. With me today is our Chief Executive Officer, Revathi Advaithi; and Chief Financial Officer, Kevin Krumm. We'll give brief remarks followed by Q&A. Slides for today's call as well as a copy of the earnings press release and summary financials are available on the Investor Relations section at flex.com. This call is being recorded and will be available for replay on our corporate website. As a reminder, today's call contains forward-looking statements, which are based on our current expectations and assumptions. These statements involve risks and uncertainties that could cause actual results to differ materially. For a full discussion of these risks and uncertainties, please see the cautionary statement in our presentation, press release or in the Risk Factors section in our most recent filings with the SEC. Note this information is subject to change, and we undertake no obligation to update these forward-looking statements. Please note, unless otherwise stated, all results provided will be non-GAAP measures, and all growth metrics will be on a year-over-year basis. The full non-GAAP to GAAP reconciliations can be found in the appendix slides of today's presentation as well as in the summary of financials posted on the Investor Relations website. Now I'd like to turn the call over to our CEO, Revathi.

Thank you, David. Good morning, and thank you for joining us today. Starting with our fiscal Q4 results on slide four, we had a very strong finish to the year. Revenue came in at $6.4 billion, growing almost 4% year-over-year. Adjusted operating margin came in at 6.2%, which is another quarterly record. And the second quarter in a row with adjusted operating margin above 6%. We delivered adjusted EPS of $0.73, up 28% over last year. Now looking at the full year results, we achieved another year of record annual adjusted operating margins coming in at 5.7% despite continued macroeconomic headwinds. And this is our fifth consecutive year of double-digit adjusted EPS growth, reaching a record level of $2.65 per share. Also, we generated over $1 billion in free cash flow, another record high, and for the second consecutive year, we exceeded our 80%-plus adjusted free cash flow conversion target. This year we drove strong growth in key markets such as the data center as we continue to shift the portfolio towards more profitable business. We executed on multiple program ramps, completed several key acquisitions, and we won two PACE awards in the automotive space with our NVIDIA Drive AGX powered Jupyter compute platform and our backup DC/DC converter. Throughout all of this, we maintained our relentless focus on operational efficiency. Another year of strong results once again demonstrates our ability to effectively navigate a challenging macroeconomic environment and deliver value to our shareholders. These achievements also speak to the extraordinary dedication of our team who delivered these results under challenging market conditions. This has been the theme for the last several years, and it's important to understand how we got here. Now turning to the next slide. From the beginning, I have emphasized our focus on winning the right kind of growth that would ultimately transform this company. Since 2020, we have executed our Flex Forward strategy. We've made aggressive portfolio management decisions that positioned us to shift towards higher-value businesses. And by integrating thoughtful organizational changes and operational innovations, we have built a more efficient and resilient company. From this transformational strategy, we've delivered multiple years of consecutive record level adjusted operating margins and earnings per share. This performance validates our strategic direction and shows our ability to create sustainable value through the cycles. As you will recall, on our Investor Day last May, we formally unveiled the next phase in our evolution our EMS + Products + Services strategy. This approach builds on our world-class advanced manufacturing and supply chain capabilities, adding proprietary products and expanded value-added services that provide greater vertical integration and customization at scale. Our power products further differentiate Flex as the only provider with a comprehensive portfolio spanning the data center from grid to chip. We believe that this evolved strategy will generate greater value for our customers, more integrated engagements, and of course, margin accretive growth opportunities. Now turning to the next slide. Our data center business exemplifies this strategy in action. Total data center revenue grew about 50% year-over-year in both Q4 and for the full year, and reached approximately $4.8 billion in fiscal '25 at accretive margins. We also strengthened our competitive position through several acquisitions aimed at solving critical challenges around power, heat, and scale. Our data center revenue is comprised of two parts, cloud and power. In FY '25, our cloud programs generated about $3.5 billion as we provide end-to-end customized hyperscale rack solutions. Cloud operations are increasingly seeking more complete solutions to improve efficiency and cost at the scale they require. This year we further enhanced our solution with direct-to-chip liquid cooling capabilities through our JetCool acquisition. Our power products, which is a combination of our embedded and critical power solutions, generated about $1.3 billion in revenue in fiscal '25. As you can see in the graphic, embedded power solutions start at the board level with our power modules managing power to the GPU or custom ASIC, all the way through the rack. Critical power solutions is the other part of our power portfolio which covers everything above the rack and through data center facilities, including our power pods that provide a fully customized modular data center power in a box which is critical in supporting faster time to market and future flexibility as data centers evolve. Through our Crown Technical acquisition, we enhanced our critical power capabilities in the data center and expanded our addressable market into grid modernization. As you can see, we have truly differentiated ourselves as the only company providing both end-to-end IT cloud integration and an innovative power portfolio that spans from grid to chip. This synergistic combination reinforces our position in the evolving AI data center ecosystem, given the convergence between compute and power. Our value proposition is evident in the strength of our data center revenue growth at accretive margins. As we look to next year, we expect data center revenue to grow around the mid 30% level, with power likely a little above that rate as we ramp domestic capacity and cloud to be slightly below due to difficult comparisons. Now turning to slide seven. Regarding tariffs, here are a few things to keep in mind as we navigate the evolving situation. As we previously stated, tariffs are a pass-through cost. Mexico is our largest revenue center, and over 90% of what we produce there is USMCA compliant. Very little of the product manufactured in China comes to the US. However, we do procure raw materials from China and other countries that may still be impacted by higher tariff, so this does add costs that we will ultimately pass-through. As a trusted global manufacturing partner with deep supply chain expertise, we have become the first call for customers to help navigate today's complex trade and tariff environment. Through our proprietary Pulse simulation platform and our team of supply chain experts, we have visibility and potential tariff impact by customer and by country, and are currently working with many customers to develop durable tariff mitigation strategies. This approach builds on our success guiding customers through Tariff 1.0 and other recent major geopolitical events. What's particularly noteworthy is how quickly the situation has progressed from conversations about potential location scenarios to customers moving forward with transition plans for North American manufacturing capacity. We believe these moves are reflective of a long-term trend towards regionalization, as well as the value of our footprint and the trust customers place in our execution. We were early in establishing the right footprint capabilities and labor pools in key markets. Our actions and strategic investments have enabled us to have the right ecosystem in place today. Flex's global operational footprint now covers over 48 million square feet. Last year, we expanded four new strategic locations, predominantly in the US, which now encompasses 7 million square feet across 17 facilities and further expandability. When combined with our 9 million square feet in Mexico, we now command one of the largest advanced manufacturing footprints in North America. This expansion has been tied to current customer demand, especially with cloud and power programs. We'll continue to be selective on new programs in North America as we prioritize capacity for initiatives that deliver maximum value and align with our longer-term strategy. Additionally, our EMEA footprint now exceeds 11 million square feet, also maintaining our position as one of the region's largest diversified manufacturing providers. You can see how our extensive footprint and operational agility have now become tremendous strategic assets. Of course, there are still risks in the current tariff environment, particularly to demand, and a potential slowdown in the broader economy. Still, we believe that we are well-positioned to support customers and expect Flex to remain both a facilitator and beneficiary of regionalization in the coming years. Kevin will provide our full guidance in just a moment, but I want to make a few comments as we look ahead to fiscal 2026. Once again, this year is off to a dynamic start. As I've said before, resiliency and adaptability are embedded in our core, enabling us to navigate years of disruptions while still executing our longer-term growth and margin expansion strategy. The strength of this foundation becomes evident when you consider that despite current market uncertainty, our fiscal 2026 guidance indicates we expect to achieve a 6% adjusted operating margin, reaching our fiscal 2027 target a full year ahead of schedule. Stepping back, I remain deeply confident in our strategy and distinctive value proposition. I believe our current capabilities and competitive advantage present the strongest opportunity in our company's history. And I'm very excited about our future and the exceptional value we'll continue to deliver to our stakeholders. Lastly, I want to thank the Flex team again for your continued dedication and hard work. I also want to thank our customers for their trust and partnership. And with that, I'll turn it over to Kevin.

Thank you, Revathi. Good morning, everyone. Starting with our Q4 results on slide nine. Fourth-quarter revenue came in at $6.4 billion, up nearly 4% versus the prior year. Gross profit totaled $602 million, and gross margin improved to a record level of 9.4%, up 80 basis points. Operating profit was $396 million with operating margins at 6.2%, up 80 basis points. And as Revathi mentioned, this was a new record for Flex. Finally, earnings per share for the quarter increased 28% year-over-year to $0.73 per share. Turning to our quarterly segment results on the next slide. In Reliability, revenue was $2.9 billion, down 1.3%, largely driven by strength in power offset by continued softness in core industrial and renewables. Operating income was $180 million with segment operating margin up 40 basis points, finishing at 6.2%. Agility revenue totaled $3.5 billion, growing a very strong 8.2%, driven by cloud demand and networking share gains offsetting weak enterprise IT and consumer end markets. Operating income was $230 million with operating margins up 100 basis points and improving to a new quarterly record of 6.6% on continued mix improvements. Looking at our full year FY '25 results on slide 11, revenue was $28.5 billion, down 2%, driven by strength in cloud and power, primarily offset by continued softness in core industrials and renewables. Gross profit totaled $2.3 billion and gross margin improved to 8.8%, up 100 basis points driven by strong mix. Operating income totaled $1.5 billion, up 15%, leading to a 5.7% operating margin, up 90 basis points, driven by favorable mix impacts and operational efficiency. I'll point out we hit record levels for both annual gross and operating margins this year. For the full year, Flex achieved EPS of $2.65, up 23% driven by record operating profit and strong free cash flow conversion, which contributed to another year of strong share buybacks. Moving to our cash flow on slide 12. Free cash flow in the quarter was $325 million. And for the full fiscal year, we delivered a record $1.1 billion in free cash flow. The strong performance is coming from CapEx discipline and continued focus on working capital management with outsized reductions in inventory. In Q4, net inventory was down 4% sequentially and 18% year-on-year. Inventory net of working capital advances was 56 days, a reduction of 14 days versus the prior year. For the quarter, net CapEx totaled $108 million, bringing full year CapEx to $423 million or approximately 1.6% of revenue. In the fourth quarter, we repurchased about $300 million of stock or approximately 8 million shares. Our capital allocation priorities remain intact. We are focused on maintaining our investment-grade balance sheet, funding CapEx to support organic growth, deploying capital towards accretive M&A and returning capital to our shareholders opportunistically through our share repurchase program. This was evident in FY '25 as we deployed CapEx judiciously, spent about $400 million on strategic accretive M&A, and repurchased nearly $1.3 billion of stock representing about 9% of our outstanding shares. Turning to our segment results for FY '25 on slide 13. FY '25 was a highly dynamic year. Still, we delivered exceptional performance in key end markets such as data center, as well as achieving growth in medical devices and automotive power electronics, where we continue to benefit from content gains. Macro-driven headwinds affected several end markets including core industrial, renewables, and medical equipment. We believe these headwinds are temporary and expect these end markets to support growth in the future. Our diversified end market strategy has enhanced our resilience through market cycles while simultaneously driving growth in our strategic focus areas. Additionally, active portfolio management to improve mix, growth in our products business, and expanding value-added services have helped drive strong margin expansion through the cycles and in both segments. Finally, our focus on operational excellence and efficiency is contributing to record level operating margins. In our Reliability segment, revenue was $11.7 billion with operating margin finishing at 5.8%. Again, that's a record level for the segment, and despite the top line pressure, the team still delivered 50 basis points of margin improvement. In our Agility segment, revenue totaled $14.1 billion delivering a 6.1% operating margin, also a record. I'm reminded agility margins used to be around 2%, so that's quite a transformation and it reflects purposeful mix shift towards higher value business in all three business units. Looking at our full year '26 guidance on slide 14. With respect to the current macro environment, we're taking a conservative approach to our initial guidance. We believe it's prudent to provide a wider than usual revenue range, recognizing there are a lot of variables that create uncertainty for our customers. That said, we have not expanded the range for our operating margin or operating profit as we are confident in our ability to navigate this environment from a profitability standpoint as we've done over the last few years and in other challenging situations. Additionally, we have not incorporated direct tariff impacts to our expected costs or revenues, given the rapidly changing nature of the situation. I'll explain that in further detail in a moment. Another factor to consider as we look to FY '26 revenue guidance, we are seeing an increasing number of customers moving to our customer-sourced inventory models, particularly in our cloud business. Financial reporting requires that the value of the customer-sourced inventory under these contracts be excluded from revenue. The net effect is that this shift in contract mix is muting our reported growth rate by excluding this activity which is growing significantly year-on-year from revenue. With the strong growth in our data center business, cloud is becoming a more material contributor, and within cloud, we are seeing an increase in adoption of these models. In FY '25, this customer source inventory activity increased $1.5 billion and represented approximately 17% of revenue. This is versus approximately 11% of revenue in FY '24 and is expected to increase an additional $1 billion plus in FY '26, which would represent approximately 20% of revenue. We've said in the past we support our customers in either standard purchase and resale models or these consignment-like models because they both drive operating profit dollar growth which you saw increase 15% year-on-year in FY '25. The simple takeaway is that we are winning new higher value data center business not fully reflected in growth rates, which is driving growth in operating profit and EPS and generating greater value for our shareholders. As we look ahead, our FY '26 expectations are revenue to be between $25 billion and $26.8 billion; adjusted operating margin to be between 6% and 6.1%. As we said in the past, as global tax rates increase, we expect some headwinds. So, for FY '26 we expect our adjusted tax rate to land at about 21%. We expect adjusted EPS to be between $2.81 to $3.01 per share, and we expect to generate strong free cash flow and maintain our 80%-plus free cash flow conversion target. As Revathi said, our adjusted operating margin guidance implies that we hit our FY '27 target of 6%-plus operating margins a year earlier than expected. With regards to tariffs, it is a highly dynamic situation, but a few things to keep in mind. We expect tariffs to be a pass-through cost, and we typically have strong contractual protections to allow for this. Tariffs can affect cash flow timing if there is a lag between when we pay the tariff at the border and receive the recoveries from customers. Depending on the magnitude, tariff recoveries could have an impact similar to inflation recoveries during the supply chain crisis where we saw a slight increase in revenue growth and slight pressure on operating margins as recoveries came in as low-calorie revenue. Lastly, some Flex One power products could be subject to tariffs due to current material and component sourcing. While we don't anticipate this to be a material issue, we do have pricing actions underway to offset these impacts where needed. Obviously, this is all still rapidly evolving, which is why we've excluded these direct tariff factors from our guidance. I just want to reiterate we have a strong footprint in the right geographies which we are confident will allow us to help our customers navigate this environment and position Flex well to benefit from the longer-term trends in regionalization. Moving onto our initial FY '26 segment outlook. For Reliability Solutions, we expect revenue to be flat at the midpoint, with continued strength in data center power offsetting macro-related softness in automotive, core, industrial, and renewables. For Agility Solutions, we expect revenue to be flat to slightly up, driven by sustained strength in cloud demand, network and share gains, and lifestyle wins tempered by soft enterprise, IT, telco, and consumer devices. Finishing off with our guidance for the first quarter on slide 16. We expect Reliability Solutions to be flat to down high single digits, largely due to expected auto weakness on tariff-related disruptions affecting customer volumes. We expect Agility Solutions revenue to be down low single to up mid single digits based on strong cloud balanced against softer enterprise, IT, and consumer-related end markets. For total Flex, we expect revenue in the range of $6 billion to $6.5 billion with adjusted operating income between $330 million and $370 million. Interest and other expense is estimated to be around $50 million, and the adjusted tax rate to be around 21%. Lastly, we anticipate adjusted EPS to be between $0.58 and $0.66 per share based on approximately 385 million weighted average shares outstanding. With that, I will now turn the call back over to the operator to begin Q&A.

Thank you. We'll now begin the question-and-answer portion of today's call. Our first question comes from the line of Samik Chatterjee with JP Morgan. Please proceed with your question.

Hi. Thank you. Good morning and thank you for taking my questions, and congratulations on the strong margin guide here. Maybe if I can start off with that. As we look at the margin guide for fiscal '26, which is for 6%, a bit more than 6%, how should we think about the drivers related to fiscal '25 outside of maybe mix on the cloud business, as that grows rapidly outside of mix on increasing contribution from cloud, what are the other drivers you're sort of penciling in there in relation to the strong margin guide for fiscal '26? And I will follow up.

Hi, Samik. This is Kevin. I'll start on that. Yeah. You nailed it. A big driver of the mix year-on-year is going to be our continued growth in the cloud, also the data center product business. As we earn our power business, we should continue to see favorable mix impacts from that as well. I will point out our service business, we expect continued growth there year-on-year, which should have some favorable mix impacts. And then lastly, what I'll say is the drivers of mix that you've seen benefit our business in FY '25, we expect to continue in FY '26, which is in each one of our segments, we expect them to continue to drive mix improvement in those segments through operational efficiency and continued productivity and leverage.

Understood. For my follow-up, you've mentioned in your prepared remarks that customers are currently seeking capacity, which you have available in both Mexico and the US. Could you provide some insight into what you're hearing from customers regarding demand for your US operations versus Mexico? How much flexible capacity do you currently possess, and does this create an opportunity for higher margins as you progress through fiscal '26? Thank you.

Yeah. Samik, I would say first is definitely for our teams, the phones are ringing off the hook as customers are trying to figure out, one is what's the impact of tariffs and then longer term what this means for their footprint. The good part is that we have worked through this in the whole Tariff 1.0 scenario and we've done a lot of work already in terms of moving the footprint around for our customers over the last five years. So, it's not new to us. The good news for us is that our footprint is so strong in Europe and in North America that we have some available capacity. And we have also announced new capacity expansions over the last year, as you have seen and heard from us in these regions, that we're able to really be thoughtful about what is the right kind of mix we want as we look at these capacity expansions. But at the end of the day, we want to help our customers, right, and that is our big focus. So, a lot of conversations with customers on open capacity, increasing utilizations in terms of our existing equipment to drive productivity so we can drive more volume for them from these factories. All of those things are continuing conversations, and we expect the continued shift that has happened in our footprint, that has happened in our PPE and then as a result, continued improved margin as a result of these changes. So, while tariffs create a lot of noise and are not helpful in many ways, the changes that are happening to regionalization and to customer locations as a result of this are really, really important to us. And so only the last thing I'd say in closing is as customers look at things from a longer-term perspective, regionalization will continue. We will need open capacity in North America, could be Mexico or the US and I believe they're very well equipped to deal with that and support them through that transition.

Thank you. Thanks for all the color.

Thank you. Our next question comes from the line of Steven Fox with Fox Advisors. Please proceed with your question.

Hi, good morning, and thanks for taking my questions. I had two. First off, Revathi, I was curious if you could expand on your comments. You highlighted around data centers, your scale advantages. How does that play out in the new fiscal year? What are you seeing in the marketplace that is sort of playing into those advantages? And then Kevin, just from an inventory standpoint, obviously a lot of improvement there. How do we think about sort of inventories and working capital impacting the cash flows in fiscal '26? Thanks.

Okay. Steven, I'll start off. I'd say in data centers, as I think about our overall kind of footprint and capability, right, is one is in the IT integration side that comes under our CEC business. First is having the ability to have a fully vertically integrated capability. That is where you're cutting the sheet metal, putting all the equipment together with server storage, switching devices, having the power available to do it. Then also today having liquid cooling capability to scale these customer orders up are all important. And so, we have the ability not only to have the footprint but have the power availability for these IT integration and the equipment and the utilization capability for rack integration, I would say unlike almost any other competitors in this region in this area. So, scale is really, really important in the IT integration side. On the power side, the engineering and design capability in terms of not only designing what is happening today, which is we're talking about kind of 100-kilowatt power in rack or higher in some cases, being able to design that with kind of the silicon providers is really significantly important. So, there this of engineering capability in designing that and deploying that I think is very important for us. So, on the power side, the scale comes not only from footprint but from the engineering scale and the depth of experience that exists there. The thing I said in my prepared remarks that I've said a few times before is what is coming together is compute and power, and there's really no supplier who can put the two together other than Flex. Right? And so that is a very unique capability we have that totally differentiates us. And more and more customers are asking for that today, not only in terms of the programs they're working on today, but what they're designing for the future. And that's a very unique differentiation that we have.

Alright. Steven, thanks for the question. On inventory, as you asked on FY '26, I'll point to sort of inventory trends over the last couple of years. As you know, coming out of COVID, we invested heavily in inventory and we've been harvesting that investment over the last couple of years, and certainly did so again in FY '25, which was a big driver in our record level free cash flow, which was about $1.1 billion. As we end the year, our team has done a great job, and we see inventories really ending FY '25 at more normal levels. All that said, we do expect some improvement in our inventory rate and in our working capital rate in FY '26, but not at the levels we've seen over the last couple of years. And that's really what's informing our 80%-plus free cash flow conversion target. The other thing I'll point out with respect to FY '25 as we move into FY '26 is in FY '25 CapEx as a percent of revenue was about 1.6%. That's a little below our target rate, historical target rate of about 2%. So, as we go back into or as we go into FY '26, I expect our CapEx as a percent of revenue to normalize closer to that historical rate. Again, that's a contributor to our full year guide of 80%-plus free cash flow conversion.

Great. Thank you very much.

Thank you.

Thank you. Our next question comes from the line of Ruplu Bhattacharya with Bank of America. Please proceed with your question.

Hi. Thanks for taking my questions. Revathi, you talked about strong growth in power and cloud, and I think you guided to 30% year-on-year growth. Can you delve a little bit deeper into who the customers are that you're targeting now for both cloud and power? In cloud, can you maintain that growth with just the top customer that you had, or are you planning to expand beyond that customer? Is hyperscale the customer set, or is it enterprise? In power, can you give some details on what the customer set is and which region do you see power products growing? Any kind of details to help us get comfortable with the 30% year-on-year growth rate? And I have a follow-up. Thank you.

I'd like to emphasize that you can be completely confident in the 30% growth target, especially considering our strong execution over the past few years. It's important to note that we often take a conservative approach in our long-term guidance. I want to assure you that the 30% target is something you should definitely feel assured about. In terms of where this growth is coming from, on the IT integration side, we have a diverse mix of multiple hyperscaler customers. We are not dependent on any single large hyperscaler, and all of them are experiencing substantial growth with significant long-term projects coming up. Additionally, we are also expanding our presence with smaller cloud customers in various regions, which is a key aspect of our strategy. Our IT integration business is characterized by a very diverse customer base. Regarding our embedded power business, which involves designing power components for chips, we primarily collaborate with silicon providers, many of whom are hyperscalers producing their own silicon. We have a significant diversification of end customers here as well. In our critical power segment, we partner with nearly every major colocation provider and big hyperscaler, especially in Europe and North America, though our presence in Asia is comparatively less. The geographical and customer diversity within our data center business is what truly sets us apart. As technology integrates compute and power, we are uniquely positioned to advance that technology, which is a critical advantage for us.

Thank you for the information. I would like to ask about the impact of customer-sourced inventory on both revenues and margins. You mentioned a $1 billion impact in fiscal '26. Is this solely related to hyperscale, or does it extend to other end markets as well? Are you observing this in both the power and cloud businesses? Additionally, what effect does the shift to a customer-sourced inventory model have on margins? Is it beneficial or detrimental? Any insights would be appreciated. Thank you.

Sure. I'll address your question. Regarding hyperscale, it is not isolated. The contracting arrangements extend beyond just our cloud business, although most of the contracts are indeed in the cloud sector. As for margins, the short answer is yes, there is an improvement when comparing year-on-year results. However, it's crucial to remember that for fiscal year '25 and as we project into fiscal year '26, we do anticipate an increase in our margins that isn't reliant on this boost.

Great. Thank you for all the details. Really appreciate it.

Thank you. Our next question comes from the line of George Wang with Barclays. Please proceed with your question.

Hey, guys. Thanks for taking my question, and congrats on the quarter. I have two quick ones. Firstly, maybe for Kevin, I noticed the implied OPM percentage for 1Q '26 is a bit lower sequentially, kind of drive with first quarter a year ago as well, kind of will step down from 4Q to 1Q. Is this just due to typical seasonality or kind of startup cost with the program ramping? Can you kind of call out the drivers, kind of pointing to implied OP percentage maybe kind of 5.6% for the 1Q?

Hi, George. Regarding the decrease in implied margins from Q4 '25 to Q1 '26, there are two main factors. First, we anticipate a decline in our sequential revenue, which will lead to reduced fixed cost absorption in some of our business segments. Second, we expect a decrease in our automotive business from Q4 to Q1, and the cost structure in that sector will contribute to a slight margin reduction in the first quarter compared to what we expect as the year progresses. These are the two primary reasons for the decrease in operating margin from Q4 to Q1.

And I'd say George, the only thing I'd add to that is you've seen this in the last year also, right? Our Q1 was somewhat soft and had a fairly strong year in terms of our margin performance. And you can see our FY '26 guide is really strong, with a 6% operating margin that we're going to hit a year ahead of schedule. So, I'm not worried about kind of the sequentials. I feel very good about how we have laid this out. It's going to be a strong year.

Yeah, I agree. Also, quick follow-up for Revathi. You guys called out networking share gains which caught my eye. I'm just curious if you can double-click on the networking share gains. Can you talk about which specific customer set, or is it mostly broad-based? And in terms of share gain, are these gains from Asia competitors, or could it be just a share gain from US-based EMS guys as well? So, just if you can give any color on that. Thanks.

Yeah. The only thing I would say, George, is that we mainly grow with kind of large players in the networking space and they're all fairly well known to you and to everyone. So, we've continued to grow with them in the last few years. And I would say in terms of geography it is across the world with these share gains and these customers. So, I think that's all I can add to it. Right? I'm not going to share names and all that, but it's a pretty significant part of where we have grown and it's a very good business for us.

Okay. Just a quick one if I can squeeze in. Just in terms of value-added services, last year you guys talked about $1 billion. In the prepared remarks, you talked about year-over-year growth. Just curious about any color beyond that. Just how to quantify the growth rate for FY '26 for the value-added services which is margin accretive.

Yeah. I don't think we are sharing growth rates for FY '26 in terms of the services business. I think we give you enough as we look back usually on the services business. All I'll say is we expect to grow again in fiscal '26 in almost all aspects of that business. As you know very well, it really drives vertical integration for us across multiple end markets. And it is important in terms of how we improve margins because that is a key part of our strategy. Revenue-wise, it's not big numbers compared to our overall kind of $25 billion, $26 billion revenue that we have, but really important in terms of building customer affinity and driving margins. But really no numbers to share for you in terms of exact growth rates and things like that. But we expect it to grow in FY '26.

Great. Thank you. Congrats again on the quarter and guide. I will go back to the queue.

Thanks, George.

Thank you. Our next question comes in line of Mark Delaney with Goldman Sachs. Please proceed with your question.

Yes, good morning. Thank you very much for taking my questions. Nice to see the margin strength and recognizing you're guiding to reach the 6% a year earlier than you'd previously targeted. I do want to better understand how tariffs may affect the margin guidance though. I believe you said your guidance excludes tariffs both with respect to revenue and cost, and you'd expect tariff costs to be passed through at low margin. So, if tariff levels are sustained, and I realize tariffs are quite dynamic, but in a scenario where tariff levels are sustained around levels they are today, do you still think you'd be at 6% margins for this coming year?

Thank you for your question, Mark. You're approaching it correctly. Our guidance does not account for any impacts from tariffs on direct share costs, which would affect both revenue and costs, resulting in margins that are essentially flat to zero. Therefore, if tariffs were imposed at the levels indicated in our current guidance, we would anticipate a downward pressure on margins. While we don't expect it to be major, there would still be some basis points impact relative to our current guidance.

Okay. Thanks for clarifying, Kevin. My other question also related to tariffs and more trying to better understand what kind of knock-on effects tariffs are having to end demand. You said you're factoring some weakness into the auto market, but as you think about some of the other end markets, are you seeing any weakness in customer schedules? Perhaps if prices are going higher, you're expecting some negative elasticity of demand, or if you're not seeing that, is that something you tried to factor into the revenue guidance? Thanks.

Yeah. I'd say, Mark, we're really not seeing anything in terms of outside of what we have talked about in automotive, in any kind of significant weakness in terms of customers themselves. And I'll just remind you that if you think about our current business mix, right, even in our lifestyle and consumer end market businesses, we are with kind of really high-end consumers and complex products. And so, we're not seeing any significant impact there. Of course, our data center business is very strong. We don't see any significant impact there. Industrial businesses are still holding, as you have seen in terms of CapEx for industrials are still pretty strong, driven by investments that they're making. So, we're not really seeing any significant impact in terms of end market demand outside of automotive. So, if you think about our guide today, it really reflects that. And you can see that from a lot of the results that are coming out. Also, that demand's holding pretty well in all the major end markets we're in. So, highly dynamic, of course. Things could change. But I would say both dealing with tariffs passed through and demand, we feel like we have included what we see today in our guide.

Hey, Mark. The only thing I want to add, because you asked your question based on OP margin, which I understand why you positioned it that way. But when we think about tariffs, while there will be a drag on OP margin, as we've thought about our guide, we do not expect there to be an impact on OP profit dollars this year, or EPS dollars for that matter. So, I just wanted to clarify that because that was a critical element of our guide as we thought about it for FY '26.

Yeah. No, that makes sense. Kevin and Revathi, thanks for all your thoughts on what you're seeing by end market.

Thanks, Mark.

Thank you. Our next question comes from Steve Barger with KeyBanc Capital Markets. Please proceed with your question.

Good morning. This is Christian Zyla on for Steve Barger. Thanks for taking the questions. First question, just going back to the Husqvarna facility acquisition. Could you just give us some additional color on how that deal came about? Was that opportunistic timing, or is that business that you were vying for? And then just more broadly, is the current operating environment across the globe getting more potential customers to the table to consider and pursue your entire suite of outsourcing capabilities?

Yeah. I would say, Christian, on the deal with Husqvarna, we constantly talk to customers and engage with them about how we can help them with their supply chain, right? So that's a constant conversation with them. As this whole regionalization conversation has become stronger and stronger, and we're looking to build our footprint in North America, this was a really good opportunistic deal for us and for the customer. Where we're able to take on their capability and then add to our footprint and our capability in a region that we are very interested in growing more aggressively. So, it was really a win-win for us. And more and more conversations like that with customers are happening where not only can we help them with their footprint, existing footprint, but we can expand our capability with that too. So, it was a perfect deal, perfect timing, and really excited to welcome that group into our fold and looking to expand that capability pretty well. What was the second question? Christian, can you repeat your second question?

Yes, absolutely. Just is it getting more customers to the table to consider outsourcing or your entire suite of outsourcing capabilities?

I would say we are getting a lot of customer conversations with our teams in terms of regionalization, but also as you're doing regionalization, taking on more end-to-end capability. Because the hardest part about regionalization is going to be where is your raw material coming from? Who's going to be making that? Everything that's vertically down, not just the final test in assembly. So, it's better for customers if they hand over things to us more end-to-end. Everything from a planning perspective, managing their supply chain to then vertically integrating it into all the aspects that go into the final product does make it easier for them. So, we are seeing more of those conversations. It is pushing us to develop our own capability even further in markets like Mexico and in the US, but also develop our supply chain even more aggressively. So, Christian, you're right. It is driving more end-to-end conversations at a faster speed today than it's ever been before.

That's great. And then if I could just sneak in my second question. It's a follow up on the earlier inventory question. I know the last few years you guys have been working down to bring down inventory levels, but if we were to see inflection sooner in say core agility or auto markets, should we expect to see an equal uptick in inventories, or anything on the working capital side? Just help us think about the inflection and kind of the future. Thank you.

Hi, this is Kevin. I'll take that. When considering our inventory, if we observe a significant shift towards growth, we will need to invest in our working capital to support that growth. However, there will still be opportunities in working capital that can help offset that investment. So yes, as we shift towards growth, there will be some working capital investment across all our segments. But we also have opportunities to improve our rate, which will assist in balancing out some of that investment moving forward.

Yeah. The only thing I would add, Kevin, to that is one thing we learned through the supply chain crisis is getting really good at managing inventory end-to-end. Right? So not just for us, but for our customers and then through the supply chain. So, all of those learnings and systems and processes we have developed will all come into play overall. At the end of the day, we want to make sure our days are well in control for us and our customers. So, yes, we'll need more inventory to support growth, but the important part is we will manage our days of inventory really well across the supply chain.

Thank you, guys.

Thank you.

Thank you. Ladies and gentlemen, this concludes our question-and-answer session and thus concludes our call today. We thank you for your interest and participation. You may now disconnect your lines.