Thank you for joining us for the Gentex Reports Third Quarter 2020 Financial Results Conference Call. Currently, all participants are in a listen-only mode. Following the speaker's presentation, we will have a question-and-answer session. Now, I will pass it over to Josh O'Berski, Director of Investor Relations. Please proceed.

Thank you. Good morning and welcome to the Gentex Corporation third quarter 2020 earnings release conference call. I'm Josh O'Berski, Gentex's Director of Investor Relations, and I'm joined by Steve Downing, President and CEO; Neil Boehm, Vice President of Engineering and CTO; and Kevin Nash, Vice President of Finance and CFO. This call is live on the Internet and can be reached by going to Gentex's website at www.gentex.com. All contents of this conference call are the property of Gentex Corporation and may not be copied, published, reproduced, rebroadcast, retransmitted, transcribed, or otherwise redistributed. Gentex Corporation will hold responsible and liable any party for any damages incurred by Gentex Corporation with respect to any unauthorized use of the contents of this conference call. This conference call contains forward-looking information within the meaning of Gentex's safe harbor statement included in the Gentex Reports Third Quarter 2020 Financial Results press release from earlier this morning and, as always, shown on the Gentex website. Your participation in this conference call implies consent to these terms. Now, I'll turn the call over to Steve Downing, who will get us started today.

Thank you, Josh. For the third quarter of 2020, the company reported net sales of $474.6 million, which was a decline of 1% compared to net sales of $477.8 million in the third quarter of 2019. We finished the third quarter of 2020 with the second-highest sales quarter in company history, behind only the third quarter of 2019. The impact of the COVID-19 pandemic created extended shutdowns in the automotive industry during much of the second quarter, which continued to impact global light vehicle production, which was down 4% for the third quarter. When looking at regional production for the third quarter of 2020, the China market expanded by 11%, the European and Japan/Korea markets were each down approximately 8%, and the North American market was relatively flat. The company's largest revenue-generating markets are North America, Europe, Japan, and Korea, which were collectively down 5% quarter-over-quarter. The third quarter began with a slow start, as orders in July were far behind prior year actual results. But as the quarter progressed, our customer orders continued to grow, and ultimately the quarter ended at the highest sales levels of the year. The change in sales volumes from the second quarter to the third quarter created numerous difficulties from an operations and planning perspective, but our team met the challenge and is doing an unbelievable job to meet our customer orders with a very high level of operational efficiency. During the third quarter, volumes increased so quickly that it became very difficult for our operations teams to keep up. But in typical Gentex fashion, we had many salaried employees volunteer to help build parts to ensure we were able to meet our customer orders. For the third quarter of 2020, the gross margin was 39.7% compared to a gross margin of 37.7% for the third quarter of 2019. Gross margin improved significantly on a quarter-over-quarter basis, which was driven by the strength in orders during the quarter and the previously announced $35 million in annualized structural cost reductions that took place in the second quarter of 2020. Gross margin was also positively impacted by purchasing cost reductions and improvements in tariff-related costs, which together were able to offset the impact caused by annual customer price reductions. The cost savings actions that we took during the second quarter had a sizable and direct impact on the results reported today. These efforts have reset the profitability of the company for the second half of 2020 and set the stage for what we believe will be strong margin performance, as we head into 2021 and beyond. The third quarter of 2020 margin performance was the result of quick decision-making and flawless execution by the entire Gentex team. Operating expenses during the third quarter of 2020 decreased by 5% to $49.4 million, compared to operating expenses of $52.2 million in the third quarter of 2019. The decrease was primarily driven by the structural cost reductions made during the second quarter of 2020. Income from operations for the third quarter of 2020 was $138.9 million, which was an increase of 8% when compared to income from operations of $128.1 million for the third quarter of 2019. Operating income improved on a quarter-over-quarter basis driven by product mix, operational efficiency, and the structural cost changes that were executed in the second quarter. It was also positively impacted by the fact that many of the industry trade shows that we normally participate in have been canceled due to the pandemic, and most of our business development teams have been unable to travel to customers globally. The company looks forward to being able to display products at trade shows and getting back to more normalized levels of business travel to our global customers. Once these selling expenses begin to increase, it is expected to have an approximate negative impact of 50 basis points to 100 basis points on operating margin, but should help the company secure our future order pipeline. During the third quarter of 2020, the company's effective tax rate was 18.1%, up from 15% during the third quarter of 2019. The increase in the tax rate was driven by lower foreign-derived intangible income deduction, lower discrete benefits, and certain state taxes. The company had a 5% increase in net income to $117.1 million for the third quarter of 2020, which compared to net income of $111.9 million in the third quarter of 2019. The increase in net income was accomplished despite the quarter-over-quarter reduction in sales when compared to the third quarter of 2019. This increase in net income was driven by increased gross and operating profits, which were the result of the positive product mix in the quarter, operating efficiency, and structural cost savings that were put in place during the second quarter of 2020. The company had earnings per diluted share for the third quarter of 2020 of $0.48, which compared to earnings per diluted share of $0.44 for the third quarter of 2019, primarily as a result of the increase in net income as well as a lower diluted share count when compared to the third quarter of 2019 as a result of share repurchases. During the third quarter of 2020, the company paid down $50 million of debt on our revolving credit facility. We currently anticipate that we will pay the remaining balance on our credit facility during the fourth quarter of 2020. During the third quarter of 2020, the company repurchased 1.2 million shares of its common stock at an average price of $26.93 per share. As of September 30, 2020 the company has approximately 11.9 million shares remaining available for repurchase pursuant to its previously announced share repurchase plan. The company intends to continue to repurchase additional shares of its common stock in the future in support of the previously disclosed capital allocation strategy, but share repurchases may vary from time to time and will take into account macroeconomic issues including the impact of the COVID-19 pandemic, market trends, and other factors that the company deems appropriate. I will now hand the call over to Kevin for the third quarter financial details.

Thank you, Steve. Automotive net sales in the third quarter of 2020 were $464.7 million compared with $464.3 million in the third quarter of 2019. Automotive net sales were strong during the quarter of 2020 despite the 3% quarter-over-quarter decrease in auto-dimming mirror unit shipments, primarily driven by revenue growth of the company's Full Display Mirror product. Other net sales in the third quarter of 2020, which include dimmable aircraft windows and fire protection products were $10 million a decrease of 26% compared to other net sales of $13.5 million in the third quarter of 2019. Dimmable aircraft window sales decreased by 52% for the third quarter of 2020 when compared to the third quarter of 2019. The company expects that dimmable aircraft window sales will be impacted until the recovery of the aerospace industry begins and the Boeing 787 aircraft production levels improve. In terms of the balance sheet, during the third quarter, the company continued to focus primarily on maintaining high levels of liquidity in order to remain well-positioned for multiple economic scenarios. As previously mentioned during the quarter, the company began repurchasing shares, but also paid down approximately two-thirds of its debt. I'll mention a few key balance sheet items as of September 30 compared to December 31 of 2019. Cash and cash equivalents increased to $400.5 million up from $296.3 million, primarily due to year-to-date cash flow from operations and investment maturities, which were partially offset by share repurchases, dividend payments, and capital expenditures. Short-term investments were $52.3 million down from $140.4 million. The company had approximately $88 million of investment maturities, the majority of which were not reinvested during the second and third quarters of 2020. Long-term investments were $159 million, up from $139.9 million. Long-term investments include FDIC-insured CDs, treasury notes, as well as corporate and municipal debt. The portfolio continues to be well-positioned with over 90% of the corporate and municipal holdings invested in A-rated or better institutions. Accounts receivable increased to $268.5 million from $235.4 million. The increase in AR was due to a significant increase in sales during the quarter and more significantly the timing of the sales within the third quarter. As of September 30, all the company's Tier 1 and OEM customers continue to be in good standing. Inventories were $233.3 million, down from $248.9 million as a result of lower raw material inventory and finished goods inventory levels. As production and sales levels have increased, raw material inventories that built through the second quarter have moved down to a more normalized level. Our purchasing and supply chain teams have continued to manage through certain supply chain stresses and supplier issues and have done an excellent job of making sure operations have not shut down as a result of component shortages. Accounts payable decreased to $90.2 million, down from $97.6 million, and accrued liabilities were $146.2 million, up from $74.3 million. Increases were due to increases in accrued salaries and wages accrued income taxes as well as increases as a result of the draw on the company's line of credit. Third quarter 2020 cash flow from operations was $138.6 million, up from $110.5 million in the third quarter of 2019. The company was able to realize a year-over-year increase in operating cash flow as a result of the increase in net income during the quarter and fluctuations in working capital. Year-to-date cash flow from operations was $329 million, which compares to $383.9 million for year-to-date cash flow in 2019, driven by the lower net income in the second quarter of 2020. Capital expenditures for the third quarter were $8.2 million, compared with $12.9 million for the third quarter of 2019. And year-to-date 2020 capital expenditures were $37 million, compared to $58.3 million year-to-date in 2019. Depreciation and amortization for the third quarter of 2020 was $25.1 million, compared to $26 million in the third quarter of 2019. And year-to-date depreciation and amortization was $78.5 million compared to $79.3 million for year-to-date 2019. I'll now hand the call over to Neil for a product update.

Thank you, Kevin. For the third quarter of 2020, there were 23 net new nameplate launches of our interior and exterior auto-dimming mirrors and electronic features net of previously disclosed feature headwinds. Of the total launches, approximately 50% had advanced features. Advanced feature launches in the quarter were led by new launches of HomeLink, Integrated Toll Module, and Full Display Mirror. We're excited to announce that during the third quarter of 2020, we began shipping Full Display Mirror to our eighth OEM customer, FCA. Developing and launching the FDM technology for FCA was a great cooperation between both organizations to bring an exciting technology to market. During the third quarter, we began shipping FDM on a total of four new nameplates. These nameplates are as follows: the Jaguar I-PACE, the Ram 1500 TRX, the Ram ProMaster, and the Toyota Venza. The variety in these nameplates helps to show how broad the use cases are for the FDM product and we're excited to see them come to market. For 2020, we have launched Full Display Mirror on 18 new nameplates. Our final launch update for today is in regards to Integrated Toll Module. During the third quarter, we made our first production shipments of ITM on six new platforms for Audi. Currently, we are shipping ITM on nine platforms for Audi, and they are as follows: The A4, A5, A6, A7, Q5, Q7, Q8, e-tron, and e-tron Sportback. We're excited with the progress of the ITM launches and we continue to see great interest in this technology from our customers. The third quarter of 2020 was a strong launch quarter for the company, and the Gentex team has done an incredible job keeping these launches moving forward even with the adverse conditions we've had to deal with in the second quarter of this year. I'll now hand the call back over to Steve for guidance and closing remarks.

Thank you, Neil. The company's current forecast for light vehicle production for the fourth quarter and full year 2020 and 2021 is based on the mid-October 2020 IHS market forecast for light vehicle production in North America, Europe, Japan/Korea, and China. Based on this information, light vehicle production in the company's primary markets is expected to be down 2% for the fourth quarter of 2020 versus the same period last year. For 2020, light vehicle production in the company's primary markets is expected to be down 16% when compared to 2019. For 2021, light vehicle production in the company's primary markets is expected to be up 12% when compared to 2020. Based on this light vehicle production forecast and the structural changes that the company has made over the last several months, we have updated our previous guidance estimate for the second half of 2020 to the following: revenue of $940 million to $960 million; gross margin between 39% and 40%; operating expenses between $95 million and $100 million; tax rate between 16% and 17%; capital expenditures between $25 million and $30 million; and depreciation and amortization of $50 million to $55 million. Given the magnitude of changes this year, the company continues to believe that providing updated second half guidance will provide a more accurate representation of the new cost structure and financial performance of the company for the remainder of 2020. Also, based on the mid-October 2020 light vehicle production estimates for 2021, the company is reintroducing revenue guidance for 2021. Despite the fact that there continues to be significant uncertainty regarding macroeconomic conditions underlying overall consumer demand for light vehicles worldwide and the continued impact from the COVID-19 pandemic, we currently estimate that revenue for calendar year 2021 will be approximately 15% to 20% higher than estimated revenue for calendar year 2020. While we have enjoyed a very rapid recovery in light vehicle production over the last several months, we remain cautiously optimistic about the trends in the economy heading into 2021. We adapted very quickly in the second quarter to the COVID-19 pandemic to adjust our cost structure because we were estimating that global light vehicle production and therefore our total addressable market was likely to be much smaller over the next few years than it was from 2017 to 2019. Despite the cost changes we made during that time, we remain focused on further developing and adding to our product strategy and launch execution to help us maintain our history of growth that outperforms the underlying market. We believe that our focus on both cost control and new product innovation will provide above-market returns for our shareholders over the next several years. Lastly, I don't do this very often on earnings calls, but my last comment today is for the team at Gentex. I realize the last seven months have been unbelievably difficult on you. What has made it even more difficult is that we haven't been able to hold any of the large meetings that we usually have each quarter, so that we can communicate what is happening, our plan, and why we believe the future is bright for Gentex. But despite the challenges and the changes, you delivered again. You've already read this in letters and business updates from me, but I believe that you deserve to hear me say it out loud. Thank you. That completes our prepared comments for today. Thank you for your time, and we can now proceed to questions.

Thank you. Our first question comes from James Picariello with KeyBanc Capital Markets. Your line is now open.

Hi. Good morning, guys and congrats on a really great quarter here.

Good morning, James.

If we project the run rate from the second half of this year to next year, we can expect an impact of 50 to 100 basis points on SG&A, likely leaning towards the lower end of that range. This assumes that spending on travel and trade shows in the first half of 2021 does not significantly exceed the current run rate. For gross margins, you are forecasting 39.5% for the second half. You mentioned some benefits from purchasing cost reductions, which may contribute positively, but there is also an expected $10 million to $11 million in additional savings from cost of goods sold due to this year’s restructuring efforts extending into next year. What do you think is the appropriate run rate for gross margins as we consider next year? Can you help clarify both of these areas?

Sure. If you look at the overall gross margin, I think, the one thing that did help in Q3 that we mentioned in our press release was some help from white collar employees who were helping build parts. So gross margins were a hair higher than what we'd expect going forward. But that total is probably only a 25 to 50 basis points impact on margins. So honestly, as we stand here today, probably somewhere between 38.5% to 39.5% would be the range we would give for next year.

38.5% to 39.5%?

Yes.

Yes.

Okay. Yes. So that's very encouraging. And then for FDM, how should we – what's the right target for this year's shipment number?

If you look at – yes, I mean, we lost if you look at – if you take Q2 out of it, we were right in line with our original annual guidance. We probably made up a little ground even in the back half, made up a little bit of what we lost in Q2 in the back half of this year. So we're going to be down from our original target for this year, but definitely not a full 25% down.

Got it. And then just last one. As we think about your strong free cash flow from here right clean balance sheet. Is there a targeted total cash and investments number as we think about what your potential cash deployment is towards buybacks? Is there a targeted number you have in mind?

For total cash?

Yeah. Total cash and investments like previously you had $525 million?

Yeah. If you look at it, I mean, total cash and investments, I mean, we're going to be somewhere in that $550 million to call it a little over $600 million range is kind of where we're comfortable. So what we're focused on right now is as you saw in Q3, and we waited till we were pretty far into the quarter, and we started to see customer orders respond and then cash flow build that's when we started repurchasing. So that's kind of what we're watching as we move through the last quarter here, and then into early next year. As long as cash generation continues like it has been in Q3, you'll see us get active on repurchases again.

Congrats again.

Thank you, James.

Thank you. Our next question comes from David Kelley with Jefferies. Your line is now open.

Hey, good morning, guys. Thanks for taking my questions. Just maybe starting with the ITM launches with Audi and just lighting feverishly to keep up with the number of the models you mentioned. How are you thinking about kind of the go-forward trajectory for ITM? Just trying to get a sense of the size of that contribution into 2021 would be great? Thanks.

Yeah. So from the Audi perspective, you'll see it continue to roll out. The vehicles, the multiple models that were read off were mostly the 2021s. So as the 2021s continue to come out, you'll see ITM show up as a standard feature in those products. Late this year into the beginning of 2021, we'll begin also shipping on our second OEM for that product as well. So it continues to grow. It's not as fast as some of the other technologies, but we continue to see the interest and expansion of it.

And the nice part about that in terms of contribution really given that we're still with our launch OEM you're looking at – like Neil mentioned in his comment there, we're basically standard on most Audi vehicles in North America. And so you can get a sense of total Audi volume and sales in North America. It will give you a pretty good estimate of like what our volume is currently. And typically, we're in that kind of $50 to $65 price point for ITM.

Okay. Great. That's super helpful. And then maybe switching to cost in the quarter. Were there any one-time costs such as overtime to meet the significant ramp-up in production volumes you noted? We were just trying to get a sense for if there might be any offsets to the lower trade show and travel cost and the implications of the move forward, I'd assume reversal of those two as going end of the year here?

Yeah. We've been pretty busy. As Steve mentioned, it started a little slow, but orders ramped up pretty heavily. So, yeah, our teams were stretched a little bit working a significant amount of overtime. And we would expect that would abate as you move through and things start to normalize and may offset it, but you have to continually balance that with wage growth and expense management.

But nothing on the SG&A side that would have been higher that would have – that would be a natural offset to trade show marketing expenses.

Okay. Got it. Perfect. Thanks. And maybe last one, just if I could squeeze one in. Dimmable aircraft sales you noted down 52%. Do you expect any further sequential deterioration, or are we pretty much bouncing along the bottom from here?

No, it could go lower. Honestly, when you consider Boeing's announcements about changing the production footprint for the 787 and the significant cuts they've made to their production estimates, it could indeed decrease further. The good news is it's only 1%. Before the reductions, it accounted for 1% of revenue, so it wouldn't substantially affect the top line. However, it may have a more noticeable impact on the bottom line. It could drop lower than it has been; last quarter it was about half of where it was the previous year. Yes, it could go lower than that.

Okay. Got it. Thanks guys.

No problem.

Thanks, David.

Thank you. Our next question comes from John Murphy with BoA. Your line is now open.

Good morning, guys. I just wanted to actually follow up real quickly on the prior question. So you had white collar workers working the line, but you're saying that actually didn't create incremental costs. So I'm just curious, it just seemed like kind of that scramble would create some temporary inflation in costs that would disappear over time. That just wasn't the case?

Our scrap rates and yield losses were down in the quarter, which helped offset some inefficiencies related to overtime. I would say we are experiencing very high levels of gross margins. There isn't much potential for improvement given the current overtime situation and the adjustments we had to make. Despite the chaos, the teams performed incredibly efficiently during this time.

Okay. I have a second question about the mix. It seems like it was very strong this quarter for both Full Display and the added electronic features. I'm curious about how sustainable you believe this is. It appears that this was a period when automakers were producing very high-end vehicles. I'm trying to understand what you think will happen with the mix going forward and what specific impact that may have had on gross margins.

Yes. So I mean, if you look at the strong North America rebound, I mean that obviously plays very well into our feature set with FDM being the primary driver. Outside mirror sales were very strong in the quarter as well catering into that North American launch. But as Neil talked about the continued launches of the new vehicle platforms, that's what's going to continue to sustain the strength of product mix as we go into the next rest of this year and into next year.

What I can say about the product mix is that on a year-over-year basis, it contributed around 50 to 100 basis points. The majority of the improvement in margin came from operational efficiency and cost structure enhancements that we implemented intentionally.

That's very helpful. As a follow-up, regarding the FDM compared to ITM, when you examine these newer products, is there a significant difference in the margins from those compared to traditional electronic ads? Do you have any in-house intellectual property that you're being compensated for, unlike some of the electronics that were previously just a pass-through? I'm looking to understand how much higher those margins are compared to the base margins as these new products come in.

Our base mirror margins have typically been in the high-teens to low-20s, specifically for auto-dimming inside mirrors. Most of the advanced features we've introduced recently are performing at or slightly above our corporate average margin, which contributes significantly to our overall performance. As our base mirrors evolve into advanced features, we see a noticeable margin increase. This improvement not only generates additional revenue but also enhances the core mirror's gross margin profile from the high-teens to approximately mid-30s.

That's very helpful. Thank you so much.

Thanks, John.

Thanks, John.

Thank you. Our next question comes from Ryan Brinkman with JPMorgan. Your line is now open.

All right. Great. Congrats on the quarter. Thanks too for the preliminary outlook on 2021 revenue today, I don't think many other suppliers are going to venture to guide to next year just yet given the still high macro uncertainty. As of now that seems to imply, I think that the 15% to 20% about 1.2 to 6.2 percentage point growth over market, just simplistically looking at IHS is 13.8% growth next year. I haven't tried to weight that for your geographic exposures or anything, but I think historically you've targeted more like a 5% plus. Just curious what your growth over market assumptions are next year, what might be baked into that?

Our guidance suggests a growth of 15% to 20% based on IHS data, which estimates vehicle production next year at around 12.5%, possibly 12%. This implies that the midpoint of our guidance would exceed production in our key markets by approximately 5.5 points.

Okay. Very helpful. That is helpful. And then just last question on the $35 million annual structural cost reduction target. Is that in any way volume dependent? So if the industry continues to outperform would you maybe look to curtail that some? How should we think about that?

No, that $35 million was executed in Q2. So that's the annualized savings, but it was all executed completely in Q2.

Okay. So none of that needs to layer back on or anything if volume comes back faster?

No. I mean, it already has in Q3. If they continue to come up even faster, obviously, we'll scale the business to what orders are, but then it would be in line or proportionate to the revenue growth. So it shouldn't deter from the margin performance that you've seen.

I see. Very helpful. Thank you.

Thank you.

Thank you. Our next question comes from Mark Delaney with Goldman Sachs. Your line is now open.

Hi, yes. Good morning. Thanks for taking the question. And congratulations on the good results especially on gross margins. I was hoping to dig into the gross margin outlook a little bit more. Within that commentary of potentially 38.5% to 39.5% gross margins next year any more details you can provide as you're thinking about that number in terms of factors like how mix and volume and pricing and potentially absorption some of those other factors. What are some of the puts and takes within that 38.5% to 39.5% deal?

Thank you for the question. The main considerations as we enter a new calendar year are the annual customer price reductions. Our team is dedicated to mitigating these impacts. Historically, we have noted that this can result in a headwind of 200 to 300 basis points in the early part of the year. However, as Steve mentioned, we are benefiting from our structural cost savings, and our purchasing and supply chain teams are expected to continue compensating for many of the annual customer price reductions through lower purchasing costs. Therefore, depending on revenue growth, efficiency, and product mix, these are the same factors we evaluate every year. It’s important to note that while we expect annual price reductions to begin again in January, the overall structure of these elements remains stable.

Got it. That's helpful. My follow-up is just on the content environment more generally, and I understand you already talked about what you're expecting in aggregate as you think about the growth over production for 2021. But wondering if you could share any more details on what you may be hearing from your customers on the content environment? And I think the mix of vehicles has been trending towards the high end for the whole market which should be very good for Gentex. But then you also talked about some factors like in this current macroeconomic environment and what sort of content there may be in certain vehicles, especially premium features like auto-dimming mirrors. So just kind of any more details you can share on some of the tailwinds and maybe potential constraints as you hear out from your customers?

Sure. In the third quarter, we had solid average content per vehicle. As OEMs work to rebuild inventory, they are starting with higher-end feature sets, which is positive. Looking at releases this October and through the end of the year, we don't anticipate any drastic changes from the third quarter. The data we gather from our customers about sourcing programs and launches indicates they have estimated take rates and packaging strategies in place. Something significant would need to happen at the beginning of next year for the vehicle mix to negatively affect our forecast. The primary risk is the overall number of vehicles sold and factors such as consumer sentiment, vehicle prices, and borrowing rates. Macroeconomic trends are what we are most concerned about, while micro decisions regarding packaging will not have as significant an impact compared to these larger economic issues.

That's helpful. If I could ask one last question about the long-term outlook for easier products and electric vehicles, there are proposals for some battery electric vehicles to use either smaller outside mirrors or cameras to maximize their potential range. However, these are typically high-end vehicles, and this may present a great opportunity for Gentex. Could you elaborate on what you are observing in terms of design for your mirror products specifically within the battery electric vehicle market?

Yes. I'd start at high level first. I'd say on BEV vehicles, we do really well on content. If you look at the consumer, if you look at the average price of those vehicles what you'll see is a trend towards technology, which suits us really well, whether it's with FDM or other advanced electronic features. You look at the Audi for instance in the e-tron and that was our launch vehicle for our Integrated Toll Module product. And so we feel very well set up to be a part of that trend and take advantage of those trends. When you look at what's happening in the space, as it relates to cameras replacing outside mirrors, the talk and a lot of the movement that happened over the last couple of years has actually slowed down a little bit, primarily because of the cost structure, the difficulty engineering and getting those products in the space and the cost once you do. We still believe we have a superior offering in that space and we're excited about what opportunities that will bring. We think it's just going to be a few years longer than what everyone estimated it will be before you'll start to see. And it requires a lot of legal changes to happen in various parts of the world before it becomes mainstay or even a larger portion of the market. Right now you're talking tens of thousands of vehicles sold globally with this type of technology, and primarily because it's multiples more expensive than existing auto-dimming technology. And so we continue to be excited about the opportunity it represents, but we think it's going to be a few years out versus how fast the market seemed to think it was going to happen.

Thank you very much.

Thanks.

Thank you. Our next question comes from David Whiston with Morningstar. Your line is now open.

Thanks, good morning. First a question on unit shipments. The one positive outlier here was North American interior was actually up. I was just curious why?

Yes, it's really driven by that increase in light vehicle production from the first part of the quarter to the end of the quarter where OEMs are really trying to fill that pipeline to get vehicles on dealer lots. And then as Neil talked about, right some of the vehicle launches, FDM launches have been very strong and the strong mix towards high-end vehicles contributed towards that.

And just how would you gauge – I don't know how much insight you can get into your customers – your OEMs, customers' state of minds on supply chain and whatnot. But I imagine in April, it is extremely frantic and it's – inventory is still quite thin as you know. So do you think it's a little bit less frantic for them than it was three, four months ago or about the same?

I would say it's a little less than it was then. I mean, if you look at what was happening then, you're dealing too with government intervention at the time, telling you what you can, when you can and cannot work, how much and so that added a whole layer of chaos that fortunately right now we're not having to deal with. In terms of trying to get back up and running, the hardest part OEMs had then was trying to make sure you could staff each plant that you could get make sure your supply chain was secure. And so that's happening now but for a different reason. Before it was – did everyone get started. Could everyone make sure or guarantee they were started back up? Now, it's do you have the right number of people? Do you have the capacity in place? And can you keep up with demand? And so that's really probably what the next month or two looks like as what – all of September was really dealing with constraints and trying to make sure that your entire supply chain is operational and able to produce the capacity that's needed. And that's a similar problem that we had in the quarter and where the Gentex team really stood up well was making sure that we were supplementing where needed and people volunteering to change buildings, change lines, whatever needed to be done to make sure we kept up with customer demand.

So you have not had any customers say well we need these mirror units by tomorrow or next week but then say, well, never mind, we had too many people call in sick or we have to stop the line or slow the line, nothing like that?

No. I mean, what's happened is you have customers changing orders a lot like on this side, usually it's canceling orders when you're coming into a bad time. This time it's can we get 10% more than what we said or 15% more than we said. Typical to Gentex, we try our best to honor those. If we can't, we just give them a applicable time under which they can get those parts. And typically given the supply chain, there's flexibility from the OEMs. So if they have a request and if you give them a reasonable response, you can usually find a way to make sure you get them the parts they need in enough time for them to build the vehicles they want.

Okay. And on the guidance, the second half operating expenses are higher despite the structural cost reductions. So I was just curious about what's the dynamic there, what's increasing versus the decreases from Q2?

It's really driven by the fact that margins improved and our corporate profitability improved, which then ultimately our profit-sharing bonus, which is really for the employee level. All employees share in that that drives a little bit of increase there. Options expensing, things that we're estimating based on the performance and our expectations of what stock price will happen. Obviously, that moves options expensing, and there's a few others and like Neil mentioned, there's a lot of launch activity going on. And so, you're going to see a lot of that flow through the R&D line items.

So it’s most like comp and launches. Is that fair?

Yeah.

Yeah.

Thank you. Our next question comes from Luke Junk with Baird. Your line is now open.

Hi. Good morning, everyone. First question I want to ask is maybe a little bit more of a hypothetical. And that is, if there were to be a change in administration I mean who knows of course, but if there was we could maybe see a softening in the U.S.'s stance towards China. And I'm just wondering if you could walk through the potential benefits to the company if that did happen both in terms of gross margin as it relates to tariffs and perhaps more importantly, just the ability of the company to compete in China more broadly.

Let's assume for a moment that there is a change in administration and the trade war slows down or comes to an end. There are both advantages and disadvantages to consider. On the positive side, our duties and tariff rates on incoming components, as well as on our exports, would likely decrease. This could make our products more competitive in the Chinese market. However, at the same time, we would likely face increased competition from similar suppliers in China. Therefore, while there are benefits and drawbacks, the overall impact is difficult to gauge. Those are the main areas we would anticipate seeing if such a change were to occur.

And then, one other item to consider, and there's not a lot of details coming out, but I think if there's a change in administration a lot of the talk around increases in corporate income tax rates is certainly one of the primary agendas there in that camp. So you would expect a negative impact there.

And very concerning, as you can imagine.

Yeah, right, okay. Those are some good things to consider. And then, second, just looking out a little further into 2021 in terms of the FDM. Just any very high level guardrails you can give us around the pace of launches? Is 200,000 units still a good starting point, or maybe could that get squeezed a little bit higher, if we see this trend towards sort of the higher-end vehicle mix that we're seeing currently continue?

In terms of launches or annual volumes?

In terms of the launches, yeah.

I don't think launches will change. I mean if you look at the engineering function and the time lapse it takes to get them queued up and ready. We feel pretty comfortable where we're at for the rest of this year and into 2021. I don't think that will change a whole lot.

Okay. Actually, yeah, makes sense. I actually meant to ask in terms of just the unit numbers.

If you consider that we experienced some setbacks in Q2 due to shipping issues, the overall growth trajectory we observed over the past couple of years remains intact. Although we lost a significant portion of Q2, the expected growth rate and the number of units we anticipate adding annually have not changed. We believe this trend will continue to develop throughout 2020 and into 2021.

Yeah. Thanks for taking my question, and clearly, an exceptionally strong quarter here. Looking here, great to see the North American interior mirror market actually up 4%. I'd assume that that's bolstered by the growing dominance that we're seeing in some of these higher-value truck and SUVs. Have you seen a material increase in some of these markets for penetration rates for the interior or exterior mirrors as far as like dimmable glass? And is there significant opportunities to further push that forward over the next like 12 or 24 months?

Yes, when discussing penetration, it's been fairly consistent at around 1% a year across the market. The positive aspect for North America is our strong foothold with new vehicles, particularly with the FCA programs and GM trucks, as many platforms are in the midst of heavy launches. The OEMs are focused on getting dealer inventory to their desired levels. Therefore, while penetration hasn't noticeably increased in a significant way, we are actively working on vehicles and platforms where we currently have no exposure.

Thank you. And then just looking at the Full Display Mirror. Great to see such a sharp rebound in the third quarter. I know next year if you're guiding 15% to 20% sales growth fair to assume I would think that FDM piece of the business would be growing like materially faster than that as far as what you have planned for launches. Any detail you could provide around that?

No, your assumption is correct. I would say that we are still consistent with the expected unit growth rate of around 250,000 to 300,000 for this year in Full Display Mirror. We initially anticipated this growth to occur in 2021, and we continue to follow that trajectory.

Great. What is the potential to reach a larger portion of the market and reduce costs for the Full Display Mirrors, allowing the penetration rate to grow more significantly over the next few years to a more substantial percentage of the overall market?

Yes, we've been working on that. And a lot of the customers that we're launching with now, there's a much wider variety of price points that we execute Full Display Mirror with. So, at the beginning, everything was kind of in that $225 to $250 per unit. That's come down because that was four years ago. That's come down 3% to 4% a year in essence. So, you're really kind of in the $200 to $225 range now for most products. We also have lower-cost versions, smaller displays and all the bells and whistles, certainly not all the graphics processing capability in every product depending on what the OEM wants. And so you can see price points as well as $150 to $180 depending on the size of display and what type of graphics processing the OEM wants done. And so we do have a wide variety that we offer our customers that you start to see these on multiple OEMs. Sometimes you can notice a difference in those products. Certainly, when you drive them or how the OEM chooses to handle that graphics processing can lower our cost to them if they choose to do it at the camera or a video processing block. So, there is already a wide variety of price points. That's what has allowed us to continue to grow the number of OEMs and the units.

Great. And then last question for me. Is there any real material difference? I know that you have relationships with pretty much all the automakers as far as penetration rates for the company's products amongst the various OEMS, particularly the larger OEMs. Are there any opportunities to improve with one or two manufacturers specifically?

There are numerous opportunities ahead. When we examine high-end or luxury builders, we see a strong adoption of our core auto-dimming technology. However, our greatest potential lies with volume manufacturers. It's crucial to package our core auto-dimming technology in a way that maximizes benefits. Currently, only about 32% of vehicles produced globally are equipped with our inside mirrors, and approximately 14% to 15% have our outside mirrors. This indicates significant growth potential for our core auto-dimming technology. Additionally, the adoption of Full Display Mirrors remains quite low in the overall global production. We are enthusiastic about the opportunities that lie ahead, especially with innovations we've showcased at CES, such as the Integrated Toll Module and other new technologies that have yet to penetrate the market.

Thank you. I hope back in queue.

Yeah.

Yeah. I guess one more, I guess if we want to talk a little bit about more broadly like how material could the ITM opportunity be? I know that's still a relatively nascent offering. But if you could elaborate on that a little bit that would be helpful.

On FDM?

ITM?

Currently, the decrease in market potential is mainly due to the North American market, where the product is specifically targeted. Depending on your outlook for SAAR, the market cap ranges from 15 million to 17 million vehicles. Beyond that, it depends on how an OEM decides to package the product. It is primarily geared towards the luxury segment, with geographical preferences indicating higher utility along the coasts and in the southern regions. There are some areas in the Midwest, such as Chicago, where the product will also be beneficial, but there are certainly regions in North America where it might not be as effective due to less frequent tolling. When we analyze car sales across North America, estimates suggest that approximately 40% to 60% of vehicles are sold in regions where tolling is either prevalent or at least an option. Therefore, we estimate that 50% to 60% of the overall North American market falls squarely within our target demographic.

Thanks. Thanks for providing all the color on that. So I will hope back in queue.

Thank you. I'm not showing any further questions at this time. I would now like to turn the call back over to, Josh O'Berski for closing remarks.

Thank you everyone for your time and questions. This concludes our Q3 quarterly call. Have a great weekend.

Ladies and gentlemen, this concludes today's conference call. Thank you for participating. You may now disconnect.