Welcome to the Kaiser Aluminum Third Quarter 2022 Earnings Call. My name is Vanessa, and I will be your operator for today's call. I will now turn the call over to Melinda Ellsworth. You may begin.

Thank you. Good afternoon, everyone, and welcome to Kaiser Aluminum's Third Quarter and first nine months. If you've not seen a copy of our earnings release, please visit the investor relations page on our website at kaiseraluminum.com. We have also posted a version of the slide presentation for this call. Joining me on the call today are President and Chief Executive Officer, Keith Harvey; Executive Vice President and Chief Financial Officer, Neal West; and Vice President and Chief Accounting Officer, Jennifer Huey. Before we begin, I'd like to refer you to the first three slides of our presentation and remind you that the statements made by management and the information contained in this presentation that constitute forward-looking statements are based on management's current expectations. For a summary of specific risk factors that could cause results to differ materially from the forward-looking statements, please refer to the company's earnings release and reports filed with the Securities and Exchange Commission, including the company's annual report on Form 10-K for the full year ended December 31, 2021. The company undertakes no duty to update any forward-looking statements to conform the statement to actual results or changes in the company's expectations. In addition, we have included non-GAAP financial information in our discussion. Reconciliations to those comparable GAAP financial measures are included in the earnings release. Any reference in our discussion today to EBITDA means adjusted EBITDA, which excludes non-run rate items, for which we've provided reconciliations in the appendix. At the conclusion of the company’s presentation, we will open the call for questions. I would now like to turn the call over to Keith Harvey.

Thanks, Melinda, and thank you all for joining us for a review of our third quarter results. Turning to Slide 6. While our third quarter results reflected significant headwinds, primarily related to supply chain issues at our Warrick rolling mill, we made tremendous progress to position Kaiser for success moving forward. EBITDA declined to $31 million in the third quarter, predominantly reflecting the headwinds associated with the U.S. Mag and Alcoa supply chain challenges at Warrick, and the planned outage at Trentwood, in which we incurred incremental costs in the aggregate totaling approximately $24 million for the quarter. We believe these issues at our Warrick operation, which have caused significant disruptions during most of the year, are now resolved. More on this topic in a moment. With the actions taken and major work now complete, we believe Warrick, Trentwood, and our other facilities are well-positioned to operate at a more normalized run rate for the balance of the year in what remains a very challenging environment. As previously announced, in early July, we declared force majeure at our Warrick rolling mill due to the abrupt cessation of magnesium deliveries from U.S. Mag. However, the force majeure was lifted in early September after we successfully secured and qualified magnesium from additional alternative sources. At this point, we have secured all our magnesium requirements through 2023 and are in the process of finalizing agreements for 2024 and beyond. As a result, we believe our supply base is well diversified and we are no longer reliant on a single supplier or geographical region. Litigation with U.S. Mag continues, but U.S. Mag is no longer a factor in our magnesium supply base moving forward. At the time we declared force majeure, we anticipated production and shipments of certain beverage and food packaging products could be reduced by 40% to 50% of previously expected shipments in the third quarter. Our actual shipments were better than expected, and with the security of our magnesium supply and Warrick's capacity now fully restored, we’ll work with our customers to return to more normalized production through the remainder of the year. Work with Alcoa continued during the quarter to improve the smelter's performance, which negatively impacted the efficiencies and financial performance of the Warrick rolling mill for several quarters. These issues have now been addressed and Alcoa's performance and quality have improved back to acceptable levels. As noted in our second quarter earnings call, we continue to qualify additional molten metal sources to further diversify our metal supply going forward and mitigate the risk of any further operational disruptions. Longer term, we intend to increase the use of recycled materials as a percentage of our raw materials as we continue to migrate towards more sustainable raw material and power supplies at Warrick. During the quarter, we completed a long-planned major outage at our Trentwood rolling mill. There was significant work completed on our large stretcher, the cast house, and other areas within the mill with minimal disruption to our customers. Trentwood is well positioned for a strong finish to the year as we focus on satisfying and improving aerospace market and meeting continued strong demand for general engineering plate. I want to congratulate the team there for the tremendous effort put forward to complete this body of work and prepare our operations for continued growth moving forward. We also continued to make good progress on our roll coat capacity expansion project for beverage and food can applications at our Warrick facility. With the equipment on order, we are focused on readying the site for installation and startup of the new roll coat line to begin in late 2023 or early 2024, with production to be fully operational mid to late 2024. In summary, I'm pleased with the progress we have made to restore our operations to more normalized levels following the significant headwinds we experienced during the third quarter. We have a strong and diversified portfolio and demand has remained solid for the vast majority of the end markets we serve, which we expect to continue for the balance of the year. While continued high inflationary conditions remain and are having an adverse impact on cost and efficiencies within our operations, our teams are focused on offsetting these higher costs and inefficiencies through cost reduction efforts, efficiency improvements, and continued commercial actions to improve our margins, demonstrating the flexible nature of our cost structure. I am confident our solid market position, strong customer relationships, and multiyear contracts with strategic partners will continue to support the long-term profitable growth for Kaiser. I'll now turn the call over to Neal for more detail on the quarter.

Thank you, Keith, and good morning, everyone. Turning to Slide 8. Value-added revenue for the third quarter 2022 of $356 million increased $50 million or 16% compared to the prior year period, predominantly reflecting improved pricing across our end markets to mitigate the impact of inflationary costs. Our aero high-strength business value-added revenue increased $4 million or 5% year-over-year on 10% lower shipments, reflecting a higher mix of high-value products, while shipments reflect the impact of the planned outage at our Trentwood facility. Packaging value-added revenue improved year-over-year by $21 million or 17% on 15% lower shipments, reflecting the commodity surcharges and higher pricing, while lower shipments reflect the impact of the force majeure declared in July for our packaging products. General engineering products improved $19 million or 26% year-over-year, reflecting higher pricing on 8% lower shipments, which was driven by softness in demand for extruded rod and bar products shipped to service centers. Autobar continued to improve $5 million or 25% on a 23% increase in shipments. Value-added revenue of $1.1 billion for the first nine months of 2022 increased $307 million or 39% compared to the first nine months of 2021. Aero high-strength value-added revenue increased $45 million year-over-year on an 11% improvement in shipments, reflecting higher pricing and continued improvement in underlying commercial aerospace demand. Packaging value-added revenue for the first nine months of 2022 was $447 million or $189 million higher, reflecting a full nine months of the Warrick acquisition, commodity surcharges, and higher pricing. General engineering value-added revenue improved year-over-year by $69 million, primarily driven by higher pricing with continued strong demand, while added value-added revenue for automotive applications increased $3 million, relatively flat as compared to the prior year first nine months, reflecting the ongoing semiconductor and other automotive supply chain disruptions. Additional detail on value-added revenue and shipments by end market applications can be found in the appendix of the presentation. Turning to Slide 9. Adjusted EBITDA for the third quarter 2022 decreased $19 million compared to the prior year quarter. Reflected in the current quarter are $24 million of higher costs and inefficiencies due to the force majeure declared at a packaging operation in July and a planned outage at our Trentwood facility. In addition, we are continuing to be affected by higher inflationary driven costs, which we are aggressively moving to offset with cost reduction efforts, efficiency improvement projects and pricing actions. Our third quarter 2022 EBITDA margin of 8.8% declined from 16.5% in the prior year period, reflecting the impact of the noted inefficiencies and higher costs. Adjusted EBITDA for the first nine months of 2022 was $128 million, a decrease of $19 million as compared to the first nine months of 2021. The decrease reflects the higher value-added revenue, as discussed, offset by higher major maintenance, manufacturing, energy and employee-related costs, as well as the $54 million of supply chain disruptions and the incremental freight costs we have discussed in this and previous quarters, which have now been addressed as noted by Keith. Moving on to Slide 10. Reported operating income for the third quarter of 2022 was $3 million. Adjusting for $3 million of non-run rate charges, adjusted operating income was $6 million, down 78% from $26 million in the prior year third quarter, primarily due to the decrease in EBITDA as previously discussed. In addition, operating income includes $1 million of incremental depreciation and amortization expense. Reported net income for the third quarter 2022 was $3 million compared to a reported net loss of $2 million in the prior year quarter. Adjusting for non-run rate items noted above, adjusted net income for the third quarter of 2022 was $10 million compared to adjusted net income of $9 million in the prior year quarter. The third quarter of 2022 also reflected a $13 million of pretax other income, primarily related to a sale of a nonstrategic legacy land asset. For the third quarter of 2022, we recorded a tax expense of $1 million, reflecting the impact of the acquired tax adjustments. For the full year of 2022, we now expect our effective tax rate to be in the low to mid single digit. And over the long term, we continue to believe our annual effective tax rate before discrete items will be in the low to mid 20% range. We anticipate that our cash taxes will remain in low to mid single digits until we consume our federal NOLs, which, as of year end 2021, were $187 million. As reported, income per diluted share was $0.16 in the third quarter '22 compared to a loss per diluted share of $0.14 in the prior year quarter. Adjusting for non-run rate items, adjusted income per diluted share was $0.60 for the third quarter of 2022 compared to an adjusted income per diluted share of $0.57 in the third quarter of 2021. As of September 30th, cash of approximately $129 million and more than $555 million of borrowing availability in our revolving credit facility provide total liquidity of approximately $684 million. There were no borrowings underneath the revolving credit facility during the quarter and the facility remains undrawn. For the first nine months of 2022, our $128 million of EBITDA and available cash funded $141 million of working capital usage, predominantly related to inventory build, $82 million of capital, $34 million of interest, $38 million of dividends paid to our shareholders, and $5 million of cash tax. We expect working capital to be a source of funds over the next few quarters as the business adjusts to a more normalized operating environment. We have lowered our planned capital spending for the full year 2022 to $165 million to $175 million due to the supply chain challenges and the timing of payments on certain projects. And now I'll turn the call back over to Keith to discuss our fourth quarter 2022 and beyond business outlook.

All right. Thanks, Neal. And now for our outlook for the balance of the year. Turning to Slide 12. We expect a solid fourth quarter in aero and high-strength shipments to end the year as the momentum continues in commercial aerospace towards full recovery from the pandemic. Rate increases for single aisles have either been announced or are being planned in 2023 as supply chains improve, airline passenger miles increase and declarations by the airframer support a stronger upcoming year. Business jet production is strong, yet not fully reflective of real demand due to limitations set by ongoing supply chain issues. Even so, there is a strong backlog for business jets with production increases set to grow each year over the next several years. Defense is expected to remain strong, led by increasing demand for the F-35 and the other legacy platforms we support. We remain well-positioned to continue to support these programs. Our Trentwood mill and our other facilities, which service the aerospace and high-strength end markets, are positioned well to capitalize on the strong demand expected in the fourth quarter and beyond. Turning to Slide 13. With the resolution of our magnesium and molten metal supply chain issues at our Warrick rolling mill in early September and the return to a more normalized operating environment, we expect to see shipments continue to improve in the fourth quarter. Our capacity for 2023 is fully committed and our long-term outlook remains intact. As discussed earlier, our investment for a new roll coat line is on track and expected to be fully operational in 2024. Discussions with customers for continued supply through the balance of the decade continue, and we remain encouraged with our long-term outlook for profitable growth in packaging at Warrick. Now turning to general industrial and Slide 14. During our second quarter earnings call, we noted inventory levels for extruded rod and bar products at service centers were slightly elevated over recent previous periods, suggesting supply was catching up to the strong demand we've experienced over the previous 18 to 24 months. During the third quarter, inventories have appeared to flatten out and slightly declined from last quarter's higher levels. But we believe this is more a factor of lower demand resulting in lower shipments from the mills to service centers in soft alloy extruded long products. We now expect that softening in long products will continue into the fourth quarter due to typical seasonality and inventories becoming more in balance with current demand. However, we are not experiencing the same market dynamics with general engineering plate shipments. Demand remains very strong and we anticipate strong shipments of general engineering plate will continue well into 2023. Global factors continue to limit the availability of these products from the typical importing mills into the North American market, allowing us to maximize our opportunities. And with the Trentwood outage behind us, we are well-positioned to serve these customers in the fourth quarter and beyond. Turning to Slide 15. Automotive continues its slow recovery due to various supply chain shortages. And at this point, we don't expect any meaningful recovery until 2023. Now turning to Slide 16. Given the current outlook for our markets and our expected mix of shipments along with continued strong inflationary pressures and an expected higher incremental spend of approximately $5 million in major maintenance in the fourth quarter, we expect our fourth quarter EBITDA and margins to improve to levels similar to the results we delivered in the first half of this year now that our major supply chain issues have largely been resolved. And in summary, turning to Slide 18. Over the longer term, our strategy remains intact and we continue to believe we are well positioned to deliver value-added revenue of approximately $2 billion and an EBITDA margin in the mid to high 20% range, the timing of which remains subject to expected investments and macroeconomic conditions. With that, I will now open the call to any questions you may have.

Our first question comes from Josh Sullivan with The Benchmark Company.

Just within the aerospace outlook, Boeing and Airbus are facing some supply chain issues related to engines. How do you see the impact on the aerospace plate side for airframes, and how has your demand outlook for commercial airframes evolved over the last nine months?

Our highest point was at the end of the first quarter in 2020. During the depths of the pandemic, our aerospace and high-strength shipments dropped to about 40% below that peak. When considering the full year, 2019 serves as the benchmark. We've since recovered and anticipate being down around 30%. We're optimistic about a recovery in late 2023 and into 2024, particularly relying on the rebound in commercial airframes. Discussions with our major airframe customers have left us feeling positive about the demand for plate, even with the supply shortages they're managing. We believe we remain on track, particularly with our facilities, including Trentwood, and with our contracts in place. As long as demand continues to recover and there are no major disruptions in the supply chain, we expect to see further improvement next year as we move toward recovery.

And then maybe sticking with high strength. What are you seeing as far as semiconductor capital equipment demand? How much of your exposure is currently outside of North America? And then are you seeing any early indications of demand from some of these large domestic capacity projects that are coming online?

There are a few major suppliers, such as Lam and Applied Materials, among others. They provide chip-making tools for end users, and their reach is truly global. We have significant operations in Asia, a substantial presence in the US, and production capabilities for Europe. The production levels for Europe and the US are quite robust and stable. However, there are some uncertainties regarding the recent Biden administration's announcements about chip production in China, and many of our end customers are navigating that situation. This could potentially dampen demand due to government directives, but we will have to wait and see. Nevertheless, we continue to experience strong demand and anticipate it will remain strong throughout 2023, and we will proceed from there.

And then just one last one. What's your exposure to any potential ban on Russian aluminum imports?

Josh, we don't buy anything from Russia. So what now? Just because we don't doesn't mean that the market isn't insulated. I can speak for Kaiser. We have diversity in not only magnesium supply, but also metal supply in our purity and other alloys. The lesson that we've had to learn from our experiences on magnesium really made us focus and ensure that, that diversity, not only of suppliers, but regionality is very well diversified. So it could have some up and down spikes in the pricing. But as you know, in the Kaiser model, we pass that through. So I really don't expect any of that impact on us. And I feel very, very good about our diversity of supply base for any of these materials. So whether it's something in Russia, whether it's something that happens in China, we're trying our best to insulate ourselves from all these global macro conditions.

We have our next question from Emily Chieng with Goldman Sachs.

My first one is just around the margin outlook there. It looks like from your commentary, you're looking at somewhere in the low teens EBITDA margin on Warrick in the fourth quarter. But perhaps as we look ahead into 2023, could you perhaps outline what the biggest driver you need to see for margins to improve close towards the low to mid-20% range? Is that aerospace volumes, is it commercial improvements offsetting cost inflationary pressures? What else should we be thinking about here?

We will focus on 2023 in February. Regarding your question, we are addressing it daily. We have moved past major disruptions that have significantly affected us. To illustrate, Neal mentioned the additional $54 million in costs we faced this year. If we hadn't incurred those costs, we would be seeing approximately a 17% margin on our business today. I am optimistic about our ability to increase pricing, which we have successfully done in various markets, even in those with long-term contracts. I believe this trend will continue unless we encounter major market shifts. Our primary challenge now is stabilizing our operations to eliminate large disruptions, allowing us to enhance the efficiencies that these disruptions have hindered. Once we achieve stability, we can return to our normal pace, which will improve our costs compared to 2022. As the aerospace sector recovers, we expect better pricing in packaging and a robust general engineering business. We believe that aligning our product mix with cost controls will help us return to traditional margins. The significant advancements will occur once we implement the new roll coat line at Warrick, enabling us to produce at a much higher margin. As we align aerospace markets back to 2019 levels, we anticipate that we will be able to achieve the performance levels we believe are possible for our business.

My follow-up is just around the 3Q value-added revenue per pound levels across your different end markets there. It looks like for aero, packaging, and general engineering, these were up pretty meaningfully quarter-over-quarter. Would that be a good level to use going forward as we think about the look forward, or is there some sort of a mix change there that drove some of the quarter-over-quarter uplift?

Well, it's a good recognition there, Emily. We are up in price across the board. I looked at these numbers, for instance, Q3 versus the second half of last year. And remember, we've been playing catch up with these costs and passing through costs. So shipments and mainly due to the force majeure issue, we were down about 13% in Q3 versus the second half of last year. But our value-added revenue is up 15%. So what we have been successful in doing is not only passing through costs and moving back prices in the right direction, we've also been very successful in passing these commodity surcharge prices through. So if you recall, when we brought in Warrick into the portfolio, Warrick had a lot of these contracts in place in which we could have annual recoup and reset of costs and certain pass-through components of the business. What we've been successful in doing is moving those to a quarterly basis on resetting those costs. Not for all but we have been successful in improving getting those costs recovered in a much timelier time frame with all the customers there. So there have been a lot of actions that have taken place and you start to see it in the bar per pound. And so not all of that is just a mix, but there is a certain amount of pass-through on the commodity prices, and there's costs that we've incurred.

Yes, just one note, Emily. In the third quarter for aero high strength, the commodity bar per pound reflects a mix because of the planned outage at Trentwood. Aerospace plate production was down, but our other higher valued extruded products made up a larger portion of the mix, which impacted the bar per pound.

Maybe just a quick follow-up there then. Outside of that mix component in aero and high strength, would it be fair to say that a lot of the sequential quarterly change in value-added revenue per pound is really just the surcharge rather than maybe sort of demand related price increases that you've been able to push through?

Well, they'll certainly continue, Emily. So I wouldn't expect a dip because now we've put those fundamentally in place with our customers, so those should continue. Now it's a little tough to differentiate between those costs and how much margin just through pricing on conversion price increase, but we're certainly focused in that area as well. So as we turn over new contracts in aerospace as we move through, we're certainly looking at increased prices that will take place. And there will be some margin expansion just on conversion price increase as we go through into new contracts. And we can state that for aero, you can state that for automotive, you can state that for packaging. And while general engineering is more transactional, we're certainly pushing through prices quicker there. And there is some margin expansion based on price improvements on our conversions. So we're very mindful of moving that through as well.

Thank you. I see no further questions in queue.

Okay. So thanks, everyone, for being with us today. I look forward to updating you on our fourth quarter and full year results next February. Thank you very much.

And thank you, ladies and gentlemen. This concludes our conference. We thank you for participating. You may now disconnect.