Good afternoon, and welcome to SiTime’s Second Quarter 2021 Financial Results Conference Call. At this time, all participants are in a listen-only mode. At the conclusion of today’s conference call, instructions will be given for the question-and-answer session. If anyone needs assistance at any time during the conference call, please press the star followed by the 0 on your touchtone phone. As a reminder, this conference call is being recorded today, Wednesday, August 4, 2021. I would now like to turn the call over to Leanne Sievers of Shelton Group Investor Relations. Leanne, please go ahead.

Good afternoon, and welcome to SiTime’s Second Quarter 2021 Financial Results Conference Call. On the call from SiTime are Rajesh Vashist, Chief Executive Officer, and Art Chadwick, Chief Financial Officer. Before we begin, I’d like to point out that during the course of this call, the company may make forward-looking statements regarding expected future results including financial position, strategy and plans, future operations, the timing market and other areas of discussion. It is not possible for the company’s management to predict all risks nor can the company assess the impact of all factors on its business or the extent to which any factor or combination of factors may cause actual results to differ materially from those contained in any forward-looking statements. In light of these risks, uncertainties and assumptions, the forward-looking events discussed during this call may not occur, and actual results could differ materially and adversely from those anticipated or implied. Neither the company nor any other person assumes responsibility for the accuracy and completeness of the forward-looking statements. The company undertakes no obligation to publicly update forward-looking statements for any reason after the date of this call to conform these statements to actual results or to changes in the company’s expectations. For more detailed information on risks associated with our business, we refer you to the risk factors described in our 10-K filed on February 16, 2021, as well as the company’s subsequent filings with the SEC. Also, during the call, we will refer to certain non-GAAP financial measures, which we consider to be an important measure of company performance. These non-GAAP financial measures are provided in addition to and not as a substitute for or superior to measures of financial performance prepared in accordance with U.S. GAAP. The only difference between GAAP and non-GAAP results is stock-based compensation expense. Please refer to the press release issued today for a detailed reconciliation between our GAAP and non-GAAP financial results. I’d now like to turn the call over to Rajesh. Please go ahead.

Thank you, Leanne. Good afternoon, and thank you for joining today’s call. We had a truly exceptional quarter. Our results reflect a fundamental acceleration in our growth trajectory, and I would say a leap forward by a year in our revenue. Increasingly, we have clear evidence that the conversion to SiTime’s silicon MEMS timing solution has shifted into high gear with existing and new designs. Over the past three quarters, our year-over-year growth rate has increased from more than 40% in the fourth quarter of last year to more than 60% in the first quarter of this year and now to more than double in this quarter. We view this as a clear validation of our strategy. The rapid adoption of new technologies that need precision timing and SiTime’s unique focus on this sector has accelerated market adoption of our products. The programmability of our products, combined with the quality and fabless model flexibility, continue to bring back these customers who now understand their value proposition even more clearly. For example, in the automotive segment, customer design-ins have taken off. There is an increased need for high-performance timing solutions because of electric vehicles, advanced driver-assistance systems, automated driving, and connectivity. These new supporting elements like radar, LiDAR, cameras, and domain control units have surged. In fact, the number of timing devices in a vehicle has increased dramatically to more than 50 devices today and continues to grow. We now believe that automotive at SiTime could represent a $100 million business over the next few years. We’re also seeing similar adoption trends in data centers and enterprise, which also has the potential to become a $100 million business in the next few years because of cloudification. As cloud services providers expand and add new features, timing, particularly precision timing, becomes critical for increasing bandwidth and lowering latency. Increasing performance requires more electronics, such as 100G, or 400G optical modules in data centers where our SiT9501 family is being adopted at a very brisk rate because of its size and performance. The need for lower latency is also driving new features such as time synchronization in servers where Elite and Emerald families continue to be designed in. To further quantify the enduring acceleration of SiTime’s business, our design wins have doubled sequentially in the automotive, industrial, and aerospace markets and increased by 40% in the communications and enterprise segments. As stated earlier, our unique systems approach to timing delivers products that just work. Customers like the fact that we are taking care of their precision timing needs, which are generally not their expertise. They further appreciate SiTime’s programmable architecture that allows them to qualify a single part and configure it in multiple ways. Last quarter, I mentioned how we have taken steps to reevaluate our pricing strategy and increase pricing on some products. We can see those benefits here in Q2. We’ve also secured long-term pricing agreements with customers at a rapid pace in Q2, and I expect this trend to continue as our customers focus on securing supply for the next 12 to 24 months. SiTime’s semiconductor supply chain allows us to quickly respond to changes in customer demand, which is an advantage over quartz which is limited by capital expense-heavy manufacturing. I’m pleased to note that we are well supported by our suppliers. Our strategy of close partnerships with wafer fabs has been rewarded as our partners view SiTime as a growth opportunity. In addition to the total available market, they continue to find more capacity to help us meet our growth and customer demand. We’ve also expanded our partnership with our assembly and test houses, where we have doubled our test capacity and already secured the capacity needed to meet demand for 2021 and 2022. As I last said, I believe we are in the golden age of semiconductors, and in particular, a multiyear high-growth opportunity in the precision timing market where SiTime uniquely excels. We have demonstrated our ability to execute on this need for high-performance programmable timing solutions across 300 applications in the past few years. In summary, we’re seeing the scaling of SiTime’s business. This forward shift is leading to a sustainable acceleration of our business. We’re on our way to living up to our full potential, and I’m very excited about that. I’ll now turn the call over to Art to discuss the second quarter results in more detail and provide the outlook for the third quarter of 2021.

Great. Thanks, Rajesh. And good afternoon, everyone. Today, I’ll discuss second quarter 2021 financial results and provide some guidance for the third quarter. I’ll focus my discussion on non-GAAP financial results and refer you to today’s press release for a detailed description of our GAAP results as well as a reconciliation of GAAP to non-GAAP results. First of all, Q2 was a very strong quarter on all metrics. We had exceptional revenue growth, significant gross margin expansion, and strong year-over-year net income growth. Revenue for the quarter was $44.5 million, up 25% sequentially and up 107% year-over-year. Sales into our mobile IoT and consumer segment, which consists of sales into mobile phones, wearable devices, and consumer products, were $21.7 million or 49% of sales. This was down 3% sequentially but up 114% over the same quarter last year. Sales into our industrial, automotive, and aerospace segment, which includes sales into automotive, industrial, medical, aerospace, military, and broad-based sales, were $13.6 million or 31% of sales, up 88% sequentially and up 124% year-over-year. Sales into our Communications and Enterprise segment, which consists of wireless infrastructure including 5G, data center, and networking, were $9.2 million or 20% of sales. This was up 58% sequentially and up 76% year-over-year. Our largest customer accounted for 15% of sales this quarter. This was down as a percentage of sales from Q1, which was the same pattern we saw last year. As I’ve mentioned before, we have a number of initiatives within the company to expand gross margins, and they continue to pay off. We had a significant step-function increase in gross margins this quarter. Non-GAAP gross margins were 61.3%, up more than 7 points sequentially and up more than 14 points over Q2 of last year. The sequential increase can be attributed to three primary factors. First, product mix was favorable. Sales into communications and enterprise and industrial and automotive markets accounted for a larger percentage of sales than in Q1. Second, the current robust pricing environment has allowed us to selectively raise some prices. And lastly, the higher overall revenue provides more leverage on our manufacturing overhead. Non-GAAP operating expenses were $17.6 million, comprised of $9.1 million in R&D and $8.5 million in SG&A. Non-GAAP net income was $9.6 million or 22% of sales with EPS of $0.46 per share. This compares to $3.8 million or just 11% of sales in Q1. Stock-based compensation expense and related payroll taxes were $7.6 million, essentially flat with Q1. Trade receivables were $25.3 million with days sales outstanding of 51 days, down from 59 days last quarter. Inventory was $18.5 million, up from $15 million last quarter as we built inventory to support higher Q3 revenue. During the quarter, we generated $4.3 million in positive cash flow from operations and invested $7.7 million in new capital equipment. We ended the quarter with $253 million in cash and no bank debt. I’d now like to provide some guidance for the third quarter of 2021. I’ll start by saying the transition from quartz to silicon has kicked into high gear as market trends continue to drive the need for higher performance timing solutions. We are seeing a significant increase in demand, which will drive further sales growth in the second half of this year and beyond. Additionally, customers are placing orders well into next year, which is giving us the best visibility we have ever had. We expect sales in Q3 will increase to between $56 million and $60 million, which is about 30% sequential growth at the midpoint. We expect sales to our largest customer to increase in Q3 to approximately 25% of total sales for the quarter. We expect continued gross margin expansion, due in this case primarily to the current robust pricing environment. Q3 non-GAAP gross margins are expected to be between 61% and 63%. Operating expenses will increase as we continue to expand our workforce and invest in new product development. Q3 non-GAAP operating expenses will increase approximately 15% sequentially to about $20 million. The basic share count in Q3 would be approximately 19.2 million shares. The dilutive effect of employee RSUs will add approximately 2 million additional shares, taking the total expected diluted share count to approximately 21.2 million shares. Based on that guidance just given, we expect third-quarter non-GAAP EPS will be between $0.70 and $0.80 per share. We are not giving detailed guidance for Q4, but we are comfortable saying that we expect Q4 revenue will be at least 10% higher than in Q3, which will drive revenue for the full year to a 75% or higher growth rate. On the topic of ESG, we continue to develop our company culture in line with basic ESG principles. As I mentioned on our last call, we promote an inclusive environment by valuing the contributions of all employees and work to ensure our employees feel seen, heard, valued, and respected. We believe diversity makes us stronger. A diverse workforce supports creativity, problem-solving, and better decision-making. We also believe it’s important to minimize the environmental impact of our products and operations to ensure a sustainable future. We continue to enhance our sustainability practices by developing and implementing policies to reduce our carbon emissions and consumption of energy and water. So in summary, we are having a truly great year. Our customers see our value proposition and are willing to pay for it. Our product portfolio continues to expand with differentiated products that address large and growing markets. We have an enviable list of Tier 1 customers that continues to expand, and we have a very strong balance sheet. And with that, I’d like to turn the call back to the operator for Q&A.

And your first question will come from Quinn Bolton with Needham & Company.

Hopefully, you can hear me. Congratulations on the great results and particularly your stronger gross margin. I wanted to start there with your pricing strategy. It sounds like you’ve really only recently begun to implement selective price increases. And so I guess to use a baseball analogy, what inning are you in with respect to price increases? And how long can that continue?

Yes, I think we're in the midst of it. We haven't quite reached the final stages, but we've definitely moved past the initial phase. Regarding pricing, in 70% or 80% of our business, depending on how you look at it, we are single-sourced. We want to honor that commitment to our customers, which is why we are very careful with our price increases, both in terms of how much we increase prices and how often. For instance, many of our customers may not have experienced any price increases. Some smaller customers might not see it, while larger ones could notice adjustments, especially from a supply chain perspective. I believe we are in the middle of this process, and I think it will start to ease up towards the end of this year, leaving us in a strong position as we close out the year.

And Quinn, I’ll just add to that. In my guidance, I did guide that our gross margins are going to continue to expand in Q3. And the reason for that in Q3 is primarily because of pricing. These are prices that in some cases we raised a quarter ago, and they’re stepped in over time. It is a very robust pricing environment out there, and we’re right in the middle of that. So we will see continued gross margin expansion in Q3 and Q4 because of that.

Great. Thank you for that additional color. And then I wanted to follow up as my second question, Rajesh, you I believe mentioned that you have locked in capacity for not only ‘21, but also 2022. I guess if I were to step back to the beginning of 2021, my guess is your 2021 outlook has improved dramatically relative to 6 years ago. And so I guess when you talked about 2022 and locking in supply, can you give us any sense of what kind of sequential increase that might encompass and how much upside, to the extent that you see another acceleration in demand, do you think you would be able to support that if ‘22 plays out like you’ve seen ‘21 play out?

Right. So first of all, I want to make sure that we’re talking here about capacity that’s locked in on the backend, on the test and assembly side, which is also very important for us, not on the wafer side. On the wafer side, we continue to see tightness just like everybody else does. We are in 180 nanometers. That’s a very, very tight node at TSMC, maybe even the world. But generally speaking, our wafer fab partners have been very helpful because we have continued to pursue a sole partnership strategy because we have long relationships with both Bosch as well as with TSMC. But one way of thinking about SiTime I want to make sure I leave everybody with is that this is not an average growth jump quarter. This is, as I said at the beginning, I see a sea change. I see a pull-in of a year’s worth of growth, if you will. And so if we continue after this at a 25%, 30% growth rate for the coming year, it could of course be even greater, but that’s always been our stated goal. And we are not walking away from that 25%, 30%.

Your next question will come from Suji Desilva with ROTH Capital.

Congratulations on your progress. You mentioned strong growth in auto, industrial, and communications in Q2. Without oversimplifying, is this growth sustainable? If it isn't, what factors contributed to such sequential growth in the quarter?

Right. So it’s two different things that are driving it, but let’s talk about what is sort of key, what is a similar thing in both of them, and in fact, in other markets as well. And that is that the need for high precision timing is growing because the world that we listen to, the world that we purvey to, which is the world of networking, timing, high-end communications, high-end cars, high-end industrial, military, aerospace, that growth is very, very high. So that’s taking us up. The second is the density per device, the density per end product, a device which could be a radio in ORAN, or it could be a car ECU, or it could be a military product, the density of timing, precision timing is going up. And finally, the functionality is going up as well, which means that the average selling price goes up significantly for each of those units. So that’s the sort of secular move up beyond that. Now inside that, one of the reasons I believe that we have been accelerated is because there is an acceleration in our end markets. And the final sort of cherry on top is the shortage in semiconductors, and particularly in timing. So that has brought customers to us that did not come to us sooner. And once they come, we have noticed that most of them tend to stay. They stay for the performance, they stay for the service, they stay for the technical capabilities of the product. So it’s just a customer discovery that has been going on at a faster rate on the back of a faster adoption of end products.

Okay, that's helpful information, Rajesh. I'm looking to better understand the Q4 outlook in relation to Q3. It seems that your larger customer and consumer base might have a stronger Q3 compared to Q4. Is that the expectation for this year? Is there anything that might counter that? Or are other segments growing sufficiently to ensure overall Q4 performance is better, despite the consumer customers typically having a stronger second half?

It’s the other customers.

Your next question will come from Alessandra Vecchi with William Blair.

I echo everyone else’s congratulations on really an epic quarter. Just to expand on Suji’s question, fully understanding the need for high-performance timing and the density per device going up, and the strong growth rate over the last couple of quarters as well. But what do you really think flicked the switch for customers this quarter that caused the inflection point? Was it a little bit also the supply chain dynamics and the recognition of sort of the trials and tribulations in quartz over the last year, or if you could just help me sort of understand really what’s caused the watershed sort of event to happen this quarter.

I would say that the strong trend of customer adoption, precise timing, end customer markets, and significant growth has been remarkable. A year ago, I wouldn't have predicted such growth in electric vehicles, advanced driver-assistance systems, and automotive connectivity. The growth in end customer markets has been a major factor, and the supply tightness has drawn customers to us. Once they engage with us, our programmability and the ability to qualify one part, which leads to hundreds of different part numbers, alongside our commitment to quality and reliability, have encouraged them to stay. We don't see this as a temporary spike in adoption that will vanish once shortages are resolved. It represents a mutual discovery between SiTime and our customers, which we believe will sustain over time. This is why we refer to it as a year of accelerated growth.

That was incredibly helpful and makes a lot of intuitive sense. And then similarly on the gross margin front, in terms of the price raise, how much of that is a like-for-like price raise? And how much of it is the updraft from the mix shift chain and some of the higher value products?

Yes. So Alex, I’m not sure I quite understand the question.

I guess, I think you said a quarter or two ago that you had sort of raised pricing on some of the legacy products as well because you had been sort of undervaluing the product. But I guess part of my question was how much of the gross margin improvement is due to the price raises on an absolute basis, on like-for-like versus just the general mix shift change towards the Endura platform and the Elite platforms?

Yes. So I’ll try to answer it in a different way. Our gross margins increased substantially from Q1 to Q2. And I gave three primary reasons. One was mix, one was pricing, and one was leverage on our manufacturing overhead. And I think each of those played kind of equal weight. So that means pricing added a couple of points of margin this quarter and each of those other points added a couple of points of margin. From Q2 to Q3, again, I’m guiding up, and I think all of that guide up is due to pricing.

That makes sense. Thank you for that clarification.

And your next question will come from John Pitzer with Credit Suisse.

My first is just a clarification. I know you guided revenue up sequentially in Q4. I thought I heard an answer to Quinn’s question that you also expect gross margins to be up again sequentially in Q4. Did I hear that correctly?

So again, I would shy away from giving detailed Q4 guidance. I did say that we are comfortable saying that revenue in Q4 will be at least 10% higher than what we expect revenue to be in Q3. So revenue is going up, and it’s not just because of our largest customer, it’s more broad-based than that. That was the answer a couple of questions ago. And then on gross margins, I guided very specifically for Q3 that gross margins would be between 61% and 63%. I think that, without quantifying it, I think there will be some additional gross margin expansion from Q3 to Q4, but I don’t want to put a number on that today.

Thank you, Art, that was helpful. Rajesh, I want to revisit your comments from your prepared statement regarding the capital-intensive nature of quartz capacity. I'm still getting familiar with your business operations. Can you clarify how long it typically takes to increase quartz capacity? Additionally, you've done a great job explaining why customers tend to remain loyal. I'm interested in your thoughts on how we should consider the pricing environment as quartz manufacturers respond to the strong demand by expanding their capacity.

I’m not an expert in this area, but I would estimate that it takes between 6 to 12 months to establish a quartz factory. However, even when that occurs, I don’t anticipate any issues because the core strength of the quartz company lies in quartz resonators, which are essentially plain quartz packaged in ceramics for sale. SiTime's expertise begins with oscillators, incorporating MEMS and analog circuits, and expands to high-performance oscillators. This includes superior performance in terms of capacity, stability, jitter, phase noise, temperature stability, and environmental stability. Even if they manage to build capacity, I believe they won’t be particularly strong because building analog circuits and integrating them with quartz products isn’t their primary business. Moreover, their performance won't match ours. This actually increases the number of customers seeking our services, as they look for support and struggle to find these products elsewhere. Customers approach us not only for new design opportunities but also when they face significant challenges and can't deliver their end products, necessitating SiTime's products. We usually take care of these customers due to our flexible supply chain, which allows us to collaborate with companies like Bosch, TSMC, and ASE to increase our capacity. While it's challenging and not guaranteed, it is possible for us, unlike quartz capacity which is fixed at around 100 million units a month—once it's reached, there’s no flexibility to increase that. Additionally, once we secure a design win, customers often utilize a single part in various configurations, where we excel, contrasting with the fixed-frequency, fixed-performance, and fixed-configuration products offered by quartz companies.

Rajesh, that leads me to my last question, and maybe you already partly answered it, but I’m curious, there’s a lot of end markets you play into with relatively short design cycles. But there’s also a lot with relatively long design cycles. So I’m curious, are you just seeing better demand for designs that you thought were coming, or is the programmability of your offering just allowing you to pick up sockets at a much faster rate even in sort of long design-in end markets like perhaps auto and industrial?

Yes, all of the above. And in fact, the added share, the added sprinkling on top of niceness is the fact that in auto, the people that we are dealing with are not necessarily the legacy people who have very different views than a person building high-volume electric cars who tend to see their electric car as a system, and they don’t have the 3-year qualification cycles, they don’t have the same degree of rigidity around thinking. In those places, that’s where the radar, the LiDAR, the cameras, the domain control, the ECUs, the ADAS, that is where we are shining, not necessarily in somebody making pickup trucks, for example. Even though I guess there’s a new electric pickup truck coming. But so we have that. We have new ways of our chips in use. We have people coming to us for all design-ins. We have people coming to us for long legacy design-ins. And that is why it’s based on the long typical networking, telecommunications, 4, 5-year lifecycles, that’s why we continue to be so bullish about the future. And that’s why I say that for timing, this is a wonderful time to be, so to speak, in timing right now, especially in the high end, the precision end of timing, not in the typical lower end part of it.

Your next question will come from Tore Svanberg with Stifel.

This is Jeremy calling for Tory. And just let me add my congratulations to everyone else’s here on a fantastic quarter. I guess first question, in terms of the end markets and your guidance, can you give us a breakdown? I know you’ve done that in the past in terms of maybe the growth expectations for each of these?

Yes. We were not that specific in our guidance for Q3. Obviously, it’s up substantially. It’s going to be in all of our major markets. At the midpoint of the guidance, we’re expecting revenue to grow 30% sequentially from Q2 to Q3. So obviously, we had a great Q2 and Q3 is going to be even better. But it’s across all of our major markets.

Great. Considering the strong and robust growth you're experiencing, what would you identify as the current limiting factor? Despite the impressive growth, are there specific issues you're facing in your end markets, supply chain, or customer supply chain that are creating critical bottlenecks at this time?

Yes. At this point, I only see world events, COVID world events as gating factors for where we are. We feel in pretty good shape otherwise.

Got it. And maybe if you can just give us a quick update on your new precision resonator line. How are I guess designs going there? Maybe anything in terms of revenue expectations?

Yes. Frankly, we haven’t been pushing that very hard right now. We’ve been busy with the growth in the clocking business and the oscillator product lines. So as you can imagine, that resonator product line is significantly lower in ASP. It generally does not exceed $0.20, whereas all the other products can go up to several dollars, $5, $10, even $15. So it makes sense for us to focus in on the higher ASP, higher gross margin revenue dollars. And so we’re focusing on that because this level of growth requires a very close end focus for not just falling units but also dollar units, dollar revenue.

Excuse me, speakers, I’m showing no further questions at this time. You may continue.

All right. In that case, we want to thank everybody for joining us on the call today. Have a great afternoon. Thank you.

Thank you.

This concludes today’s conference call. Thank you for participating. You may now disconnect.