Good morning, ladies and gentlemen. I'm your conference facilitator today, Kevin, and I'd like to welcome everyone to Cleveland-Cliff's fourth quarter and full year 2025 earnings conference call. All lines have been placed on mute to prevent any background noise. After the speaker's remarks, there'll be a question and answer session. The company reminds you that certain comments made on today's call will include predictive statements that are intended to be made as forward-looking within the safe harbor protections of the Private Securities Litigation Reform Act of 1995. Although the company believes that its forward-looking statements are based on reasonable assumptions, such statements are subject to risks and uncertainties that could cause actual results to differ materially. Important factors that could cause results to differ materially are set forth reports on Form 10-K and 10-Q and news releases filed with SEC, which are available on the company's website. Today's conference call is also available and being broadcast on clevelandcliffs.com. At the conclusion of the call, it will be archived on the website and available for replay. The company will also discuss results excluding certain special items. Reconciliation for Regulation G purposes can be found in the earnings release, which was published this morning. At this time, I'd like to introduce Lorenzo Gonzalez, Chairman, President, and Chief Executive Officer.

Thank you, Kevin, and good morning, everyone. After several years of no real actions taken to reverse the systematic destruction of the American industrial bases, we finally saw in 2025 a federal administration that values the importance of preserving and growing American manufacturing. That said, in 2025, throughout the entire year, we were still exposed to a lot of steel imports, poisoning our domestic market, creating a demand gap that negatively impacted our steel shipments and asset utilization. In response to these challenging conditions, we made difficult decisions on shutting down assets that were dragging us down. Also, in 2025, we terminated our index-based slab supply contract with ArcelorMiddle. The contract became very onerous in its final year, when the Brazilians' lab price index unnaturally separated from the U.S. finished steel prices. The factors that waited on our performance in 2025 were well-known and addressable. As we enter 2026, these problems have either been resolved or are clearly improving. We have already secured more business from our automotive clients, and that will show throughout 2026 as the OEMs reshore production back to the United States. States. Also very important, at the end of 2025, the Canadian government has finally made a move to restrict imported steel into Canada, and that has created positive momentum in 2026 for our Canadian subsidiary, Stelco. Our robust order book is the best confirmation that the business environment has already started to improve. Section 232 tariffs at 50% are, of course, a leading driver of this impact. We are seeing the benefit of melted and poured requirements in driving demand for domestically produced steel. A lot of the new galvanizing capacity in the U.S. has come online and taken share from imports, reducing the amount of hot-rolled availability in the marketplace. We have been able to use the melting capacity previously allocated to orders of low-margin slabs to few orders of higher-margin flat-rolled products. That said, due to melted and poured requirements, we anticipate continued demand for our domestically produced slabs. We remain open to being a domestic slabs supplier to those in need of domestic slabs, as long as we can agree on a pricing construct that makes sense. With all this positive influence, the spot steel price is sitting at a two-year high. Later in the recent cold weather stretch across the Midwest, scrap prices and electricity prices have continued to grind higher, which has increased the cost structure of the mini-mills to a greater level than our own. This has given us a cost advantage as we generate a lot of our own power and use much less scrap. Even with our sizable fixed-price automotive footprint, because of our vertically integrated nature and the also significant size of our non-automotive customer base, Cliff's profitability is more impacted by spot steel prices than any other company in our industry. Said another way, when hot road coil prices rally, we, Cleveland Cliffs, benefit. Automotive is still our core end market, and when domestic production levels of car trucks and SUVs remain weak for an extended period, the impact on us is unavoidable. vehicle production in the united states was down in 2085 for the third consecutive year but with with this new era of policy driven reshoring the return to pre-covid levels of vehicle production in the united states is inevitable throughout 2025 we geared up for this inevitability by signing multi-year fixed-price contracts with all major OEM customers. These agreements increased our market share and secured the high-margin business that will flow through in 2026. We have the installed capacity available right now. Cliffs does not need to build new plants. Unfortunately, the transition to CliffsSteel from the previous suppliers is not instantaneous. It takes some time before we see the full impact of these changeovers, but we will see it in 2026. The expected combination of these market share gains with an increased domestic production of vehicles will be a massive gain for our throughput, efficiency, costs, and ultimately profits. One more time, differently from our competitors currently building new steel plants or announcing plans to build steel plants, Cleveland Cliffs has production capacity available right now. Again, Cliffs does not need to build plants to be ready in 2028, 2029, or 2030. The incremental volume demanded by the automotive industry can and will be absorbed by our existing footprint. That volume carries attractive incremental margins, and thanks to our multi-year fixed price contracts with all major automotive OEMs, there will be no pressure on the price of cars to consumers in the U.S. that could even remotely be attributed to the price of CliffsSteel. Another example of the progress we continue to demonstrate in automotive is our successful replacement of aluminum with steel using aluminum forming equipment. Our CliffsSteel is now stamped into exposed automotive components using existing forming equipment on a production-scale basis. This Cleveland Cliffs development demonstrates that the changeover from aluminum to steel can be easily done without requiring new tooling or capital investment from the customer. That significantly lowers the barrier to adoption and expands the addressable market for our Cliffs steel products, particularly as the aluminum supply chain has suffered severe disruption with a succession of fire events, clearly exposing its weakness. More than ever before, Cleveland Cliffs is seeing a clear path to replace aluminum with made-in-USA steel in major applications. We operate in a market that companies from around the world are spending billions of dollars to enter. We are already here. We already have the assets. We already have the workforce. As manufacturing activity in the United States continues to recover, Cleveland Cliffs is the best positioned to benefit without requiring massive capital investments. I want to drill down on another factor that impacted our 2025 performance, and that was the change in dynamics in the Canadian steel market. For the last several years, even under the previous tariff regime, pricing in the Canadian market moved in tandem with the U.S. market. We acquired Stelco on November 1, 2024, four days before President Trump's election, and immediately took Stelco out of the U.S. market, redirecting Stelco's output 100% to the Canadian market. This was not driven by policy change, but rather our conviction on what's in the best interest for our shareholders and our employees on both sides of the border. even the all surprising change in canada relations with the u.s should not have affected this strategy at all but that's not how it played out all of a sudden canada became a dumping ground for producers trying to avoid u.s tariffs and downstream canadian manufacturing was negatively are impacted as well. Canadian pricing decoupled from U.S. pricing. Until recently, the Canadian government insisted on doing nothing about this unsustainable situation, preferring to watch its steel industry flounder for the sake of globalism. After raising the alarm louder and louder, we finally saw the Canadian government come around late in the fourth quarter of 2025. While still insufficient and limited in scope, the restrictions implemented were at least able to stop the bleeding. As a result, we have seen Canadian pricing and shipments improve in the last month prior to our acquisition stelco was a low price exporter into the u.s in the highly disruptive one by the way when you look at the big picture what our acquisition has done to transform and improve the u.s marketplace more than justifies and supports a return on our $2.5 billion purchase price of Stelco. In the fourth quarter, we revealed that our Memorandum of Understanding partner was Pusco, Korea's largest steelmaker and the world's third largest steelmaker outside of China. The partnership with Cliffs will allow Pusco to support and grow its established U.S. customer base while ensuring that its products meet U.S. counter-origin, melted and poured requirements. Our collaboration represents a model of how allies can deepen industrial cooperation under fair and transparent trade principles, and it aligns with U.S. policy goals to strengthen domestic industry and attract foreign investment. POSCO continues to conduct due diligence as part of our recently announced strategic partnership. Both parties are focused on structuring a transaction that is highly accretive and strategically compelling for each company. The duration of these negotiations reflects the seriousness and potential scale of the opportunity. We are targeting signing a definitive agreement in the first half of 2026. This remains the number one strategic priority for both Cleveland Cliffs and POSCO, and engagement between the teams is active and ongoing. Our MOU is non-binding, and we will only move forward on ratifying our partnership if the collaboration is accretive to CLIFFS shareholders. I would like to conclude my remarks congratulating our employees for our remarkable safety record. In 2085, we achieved the lowest total recordable incident rate since Cleveland Cliffs became a steel producer six years ago. Our TRIR, including contractors, which is unusual in our industry, we include contractors. Our TRIR was 0.8 per 200,000 hours worked. That represents a 43% improvement compared with 2021, which was our first full year operating as an integrated steelmaker. This is a direct outcome of how we manage and operate in contrast with how the predecessors used to do, with the same people and the same plants. safety performance at this level requires discipline consistency and leadership at every site we have room for improvement but the amount of progress we have seen in safety results since forming this new iteration of cliffs six years ago is truly remarkable i will now turn it over to our cfo celso gonzalves for his remarks

Hey, good morning. Total shipments in Q4 were 3.8 million tons, which was slightly lower than Q3 due to heavier-than-usual seasonal impacts. Looking forward, Q1 shipment levels should improve back to the 4 million ton level again, driven by improved demand and less maintenance time at our mills. My expectation for full-year 2026 shipment level is in the 16.5 to 17 million ton range, an improvement from 2025 as we run our mills at higher utilizations. Q4 price realization of $993 per net ton fell by around $40 per net ton as the lagging indices on spot prices declined. Automotive volume fell, and slab prices became even more disconnected. Since these factors are largely behind us, I expect a substantial improvement in realized prices starting in Q1 of 2026, an increase of approximately $60 per ton from Q4 of 2025. As pricing continues to grind higher, and assuming this trend continues, we will likely see even further increases in this price as the year progresses. On the operations side, 2025 represented our third straight year of unit cost reductions, with another $40 per ton reduced last year. The much-needed rationalization of our footprint and reduction of around 3,300 employees last year was a big part of that. We have further momentum heading into 2026 as we locked in coal contracts that generate over $100 million of savings year-over-year and an expectation of much higher utilizations, both in melt and in our finishing operations. Combining this with some partial offsets in utilities and labor costs, we expect unit costs to decline again for a fourth straight year, down another $10 per ton in 2026. On an apples-to-apples basis with 2025, the reduction is even greater, as we are also selling a richer mix this year without slabs, making the year-over-year reduction even more impressive. With that said, for the first quarter of 2026, the recent spike in utilities costs and change in mix will likely push costs up temporarily before normalizing into Q2. As a reminder, we generally hedge 50% of our natural gas exposure to looking forward one year. On CapEx, we had a record low year in 2025 in capital expenditures as a steel company, with only $561 million spent. 2026 total CapEx is projected to be around $700 million, reflecting more normalized maintenance capital, as well as some pre-work and a coke plant upgrade ahead of the Burns Harbor Furnacee Reline plan for 2027. Annual pension and OPEB cash obligations continue to decline. With the HRC curve where it is and automotive volumes ultimately returning, I expect to return back to healthy cash flow generation in 2026, all of which will be used to pay down debt. Asset sale processes continue, and they should bring us more cash proceeds throughout the year. We have already closed the sale of FPT Florida and we are under contract to sell several idle properties with agreements in principle for the majority of the rest. My expectation of the $425 million in total proceeds from these sales remains intact. Some of the larger asset sale processes remain in a holding pattern while the POSCO talks remain ongoing, but we have several options out there that we are evaluating. One major success we had in 2025 was balance sheet management, particularly in the fourth quarter. From a pure dollar perspective, our leverage remains too elevated for my liking, but the shape and format of our debt structure gives us incredible runway and flexibility. After the refinancings that we completed in 2025, our nearest bond maturity is now in 2029, and all of our outstanding bonds are unsecured. Our ABL draw is the lowest it has been since the Stelco acquisition, and our total liquidity to end 2025 was $3.3 billion. The focus this year is on generating EBITDA and cash flow. I feel much better about where we are today versus where we were 12 months ago. Looking ahead, our order book is solid. Demand is improving. Lead times are going out. Prices are rising. costs are still coming down, tariffs are in place, the slab contract is gone, manufacturing is coming back, unemployment is low, rate cuts are here, tax refunds are coming, Stelco is contributing, autos are looking to replace aluminum with steel, POSCO is collaborating, our employees are incentivized, and our operations and commercial teams are working together towards the same goal. to maximize profitability in 2026. With that, I'll turn the call back over to Lorenzo for his closing remarks.

Thank you, Celso. 2025 was about fixing what needed to be fixed, making tough but necessary decisions, and positioning Cleveland Cliffs for sustainable performance in a fundamentally improved market. Those actions are now largely behind us. As we move through 2026, we are operating with a linear footprint, a stronger order book, improving price realization, declining unit costs, and a clear line of sight to higher utilization and cash generation. With that, I'll turn it over to Kevin for the Q&A.

Thank you. And I'll be conducting a question and answer session. If you'd like to be placed into question queue, please press star 1 on your telephone keypad. A confirmation tone will indicate your line is in the question queue. You may press star two if you'd like to move your question from the queue. For participants using speaker equipment, it may be necessary to pick up your handset before pressing star one. One moment, please, while we pull up for questions. Our first question today is coming from Carlos de Abba

from Morgan Stanley. Your line is now live. Good morning, Lorenzo Alcanzo. Thank you. My first question is on the benefit that you expect on the cancellation of the SLAB contract this year, given the running prices that we have seen, can you maybe update us as to how much EBITDA, more or less, or any other, you know, form of benefit that you expect to see from this contract expiring? And then maybe we can, just on CAPEX beyond 2026, given the relining that you expect on 2027, how much should we pencil in, give or take, for CAPEX in 2027?

Yeah, good morning, Carlos. I will answer the question on the slabs, and I will also talk about the CAPEX one. As far as these slabs, when we sold, I'm sorry, when we acquired ArcelorMittal USA from ArcelorMittal, we had that slab contract as the last item that we had to negotiate. And it was more about duration than pricing formula, because pricing formula was based on the international price of slabs, and referencing the Brazilian slab price, just because Brazil was by far the largest exporter of slabs at the time. So, and for four of the five years, the contract worked. And then on the fifth year, magically, the separation between the price of slabs and the price of hot vans turned that contract into a disaster. And we tried to negotiate the contract, but we were unsuccessful because short-term gains for them were more important than the long-term relationship. So I'm fine with that. So I ate, I took like a big boy, and now they don't have our slabs anymore. So good luck on running their business here in the United States without having melted and poor slabs made in Cleveland Cliffs, not made in somewhere else. Somewhere else does not know what they are doing. We know what we are doing. So they don't have their slabs anymore. And if I can put a number on the gain, it would be that number by itself to the order of $500 million, just by replacing these labs with higher margin. That's a very high-level number and should be even more than that. But $500 million is a good number to start thinking about the gain of not having. And that's just a benefit on us, not the fact that competition for automotive business became automatically weaker when you don't make our slabs available to a competitor. I'll let Celso answer the other one on CapEx.

Sorry, maybe before we move to Celso. Quick question, Lorenzo. When should we expect to see the beginning of this around 500 million improvement in

already in Q1 or it's more Q2? Yeah, look, we are already selling the material in Q1, yes, so, but of course you know how these things work, the cost flows through inventory, and you're going to see more impact in Q2 than in Q1, and then more impact in Q3 than in Q2, but that's our projection for the year.

Yeah, Carlos, if you think about it, right, the HRC price is $970 or so, and the slab price was like $485. So it's a pretty immediate improvement. You know, in terms of revenue at the current price, it's like a $700 million improvement in revenue at current market prices, and then you consider, call it $150 million increasing conversion costs to roll the slabs. That's the way to think about it on a full-year basis for 2026.

Right. Thank you.

And then as it relates to CapEx, you know, as I mentioned, 2025 was a record low at 565. We had dramatically reduced spend at Stelco. We had CapEx avoidance related to idle facilities and asset optimization and things like that. um 2026 will be more normalized that 700 million um call it more normalized maintenance spend and some pre-work um and pre-spend related to the burns harbor reline in 2027 and then beyond 27 um you know it goes to call it 900 uh in 27 and then back down uh to 700 uh in 2028 and the only reason that 27 goes to 900 is largely because of that blast furnace reline at Burns Harbor.

Perfect. Thank you very much.

Thank you.

Thank you. Next question is coming from Nick Giles from B-Riley Security. Your line is now live.

Thank you, Operator. Good morning, Lorenzo and Celso. Lorenzo, you outlined the capacity you have today and attractive incremental margins on what I heard is uncontracted volumes. So, So, you know, you've layered in some multi-year agreements, but I was wondering if you could give us a sense for how much open capacity that is, what could still be contracted, and similar to Carlos' questions, just any sensitivity from an EBITDA perspective.

Yeah, look, we have downstream capacity in pretty much every single location that we operate. Just to give you an idea, let me take a simple example. Single line, galvanizing line we have in Columbus, Ohio. That was one of the first assets that were caught in the attention for Pusco. We run that line at less than 300,000 tons a year. That line has a capacity of 450,000 tons a year. We can produce all kinds of exposed parts over there. but we don't run at full capacity because the OEMs don't produce cars in the United States as much as they should. They produce in Mexico, they import from Korea, they import from other places, and that's what kind of kills our automotive business. And it has been abundantly clear since day one of the Trump administration, The directive is to produce cars in the United States, not importing cars from Korea and putting a stamp of an American OEM on top of that. It's still a Korean car. It's not an American car. It's not generating American jobs. So that's what kills our capacity utilization. We need this made-in-USA automotive production in order to utilize our capacity. What I just explained with numbers, for Columbus, Ohio, I can do the same thing for Rockport, Indiana, for other downstream facilities like what we call New Carlisle, Indiana, that used to be called Tech & Colt under previous ownership. ownership, we have a lot of capacity to deploy. And it's a matter of just moving from commodity type, which, by the way, now is extremely profitable, to a more specialized type of steel that is typical Cleveland Cliffs type of capability or forte in terms of the technology. By the way, we have the technology. We are a well-known and well-recognized supplier of automotive steel in the international scale. And we knew that all along. Now we have the agreement of Pusco on that. So there's nothing that we need to learn from Pusco to how to do stuff. We know how to do stuff. We just don't have the orders. But now we're going to have it.

I really appreciate all that detail. So my second question was really just around the outlook, particularly here in 1Q. HRC has obviously risen dramatically. So can you just help us set expectations around ASP and costs and maybe just volumes as well?

Yeah, I'll have Celso handle that for you.

Yeah, hey, Nick, let me give you guys some general guidance for Q1 and the rest of 2026. So for Q1, shipments should return back to that 4 million ton mark, and that's largely driven by improved demand, both in the U.S. and Canada. Q1 auto shipments are expected to improve back to the, call it Q3, of 25 levels or better. As I mentioned, ASP is expected to be up $60 a ton in Q1. All that pricing that negatively impacted Q4 is now positive for Q1. The monthly lag, the quarter lags, and the spot pricing are all up. Canadian pricing is also improving. You know, we talked about the end of the slab contract, and the automotive volumes increasing is also a benefit. The way that we calculate ASP has changed slightly, so let me give you guys the new kind of guidelines for that, given the expiration of the slab contract. and the increased automotive volume. The way to think about it going forward is around 35% to 40% is on a fixed full year price with resets throughout the year, obviously. And then 25% of the volumes are on a CRU month lag. 10% is on a CRU quarter lag. And then the balance, call it 25% to 30%, is the spot and other, including the Stelco volume. So that's the way to think about ASP going forward. Costs in Q1 will likely be up around $20 a ton before normalizing into Q2. But as I mentioned earlier, on a full-year basis, the cost from 25 to 26 on a full-year basis is expected to decline $10 per ton, further even with adjustments for richer mix and the expiration of the slab contract. So on an apples-to-apples basis, the cost would be down even more, but should be down around $10 per ton with the current construct. I think with that, you should have everything you need to get a sense for Q1 and the full year of 2026.

I think so. Guys, I appreciate the details as always and continue the best of luck. Thank you.

Thank you. Next question is coming from Lawson Winder from Bank of America. Your line is now live.

Yeah, thank you very much, operator, and good morning, Lorenzo and Celso. Nice to hear from you, and thank you for the update. If I could ask on POSCO, like I think there's no question that it is serious and potentially transformational for CLIFS. I was just curious, you made the remark that POSCO is still continuing their due diligence. Has Cleveland CLIFS completed its due diligence on POSCO?

Look, yes, that's correct, number one. Number two, keep in mind, Lawson, they came to us. We did not look for them. So that's a very important point to consider. So that shows that we feel like they need us probably much more than we need them. That's my view. That said, we are proud of our negotiation and our conversation and our potential partnership. One thing to keep in mind, our Cleveland Clips Board of Directors will not approve any deal that's not accretive to our shareholders. So that's what we're working on. Forming a partnership with POSCO is our number one strategic priority at this point. And based on what they say to us, that's the same thing for POSCO. uh we believe that we would be able to provide to pusco the ability to meet west trade and origin requirements particularly melting and pour into the united states in a short term uh what they need absolutely need uh they will not be able to sell here without uh uh complying with that requirement, that thing is not going to change. It's clear at this point. And this is a market that everybody wants to be in. And we are the only possibility for any company that's outside of the border of the United States to be inside the border of the United States. So POSCO is in the pole position, in a very comfortable position to have a partnership with us. We absolutely love working with them and they seem to like working with us. Now it's a matter of finalizing an agreement that's a creative to both beliefs and post-school, which should not be difficult to

accomplish. Thank you, Loretta. That was very helpful. If I could ask one following question, just on the aluminum opportunity, I mean, I think it's really intriguing. Could you maybe frame that up for us in terms of the size of the opportunity to take share from aluminum in terms of tonnages and then what would be the the timeline to achieve those tonnages yeah look

this was the type of thing that we have been have been asking for a an opportunity to prove ourselves to our our clients and for some reason they were committed to keep the status quo in place until they are no longer, because it's not just the ones that use massive amounts of aluminum. That's obvious. That's absolutely obvious. We can't rely on a supply chain of aluminum that is very weak in the United States, and they proved that by having a succession of fires in the same plant in a space of 40 days or 45 days, and also truly dependent from aluminum produced abroad, knowing that Canada is another country. Like they like to say, we're not a 51st state, yes. We agree with that. It's outside of the border of the United States. It's another country, yes. So that's why they're subject to Section 232 and will continue to be, because they are another country. So aluminum from Canada is not a strategic solution for the supply chain. And then we proved our point that stamping aluminum or stamping steel for the type of steel that we Cleveland Clips produce is the same thing. And we proved that at this point with three different OEMs, and they know what they need to do, and we are ready for them. Timing is on their control, not my control. We are ready. We proved that. We are getting orders at a production-scale basis, and this should only be growing. And the potential is the potential of the size of all aluminum utilized. The best-selling vehicle in the United States has a lot of aluminum on the outside. We are starting to produce parts for that vehicle. That's all I can tell you without triggering any problems with my clients.

that's very helpful thank you very much thank you thank you next question today is coming from alex hacking from city airline is now live yeah thanks morning um can you maybe quantify how big

of a drag on earnings stelco has been for the past few quarters um and and therefore kind of by proxy, how much potential upside there is, you know, as Canadian markets turn around. And just for context, you know, we're looking at a Canadian publicly traded pair that's guiding to losing, you know, over $250 a ton of EBITDA in 4Q. I assume Stelco's doing better than that, but, but yeah, anything you could do to help quantify that. Thank you.

Yeah. Hey, Alex, it's also, you know, we don't, break down EBITDA by mill, but obviously Stelco was disappointing in 2025, as you can imagine. But the good news is that they're a contributor now. We've seen a lot of improvement recently that will lead to significant EBITDA increase in 2026. And if you think of the big picture, on a net basis, even though they haven't been contributing to the bottom line, it has kind of changed the dynamics of the market and has helped our U.S. business. and that's only going to be amplified here as HRC pricing in the U.S. has found some footing at a higher level. So you can't really think of Stelco as a standalone. We're happy with the asset. We're happy with the people. We have great people that work for us at Stelco, but you have to think of the business as a whole, and going forward, they're going to be a much

bigger contributor to the big picture yeah uh alex lorenzo here let me add a little bit more on on the stelco compares with the with a competitor the competitor had the same business model as stelco selling to the united states and uh we bought stelco to do one thing that the competitor was never willing to do uh changing the business model to sell into canada and we did Like I said in my prepared remarks, a few days before President Trump was elected, let alone President Trump was in office and let alone President Trump implementing Section 232 tariffs in April. We did that in November. So we were way ahead of the game in terms of how to reposition STELCO. Another thing that we took from Stelco that we did not have before is made in Canada Coke, in our Coke batter over there, which is a USMCA compliant feedstock. So that was a benefit for us. And that benefit will continue to be in place. The other thing is that if we had not had all the imports from the United States being redirected to Canada, and have the Canadian government accepting that as normal course of business would have had a completely different in 2025. It took us almost one entire year to convince the Canadian government that that was a completely unsustainable situation. And they finally made a move, a move that was a lot smaller than the move that we would like them to make. But that was enough for us to see a completely different dynamics in the domestic market in Canada. So the comparison between Stelco and the competitor is not a good comparison. It's got to be Stelco for Cliffs and Stelco for Cliffs going forth. And Stelco for Cliffs in 2025 was not as good as we envisioned, basically because domestic Canadian prices went down due to the avalanche of imports into Canada. That has been put on hold. That has changed. And we will have a completely different 2026 because of that.

Thanks for the color. I guess just following up, how much better can 2026 look? Like on the price side, where do you think Canadian prices should be with the new tariff policy versus where they are today. I don't know if you can comment on that at all.

Yeah, like Celso said, we don't break down STELCO results into our results, so we do not disclose that. But it's easy to see that based on how bad 2025 was, and use the competitor as the reference for that specific point, you'll see that there will be night and day. So they will be a contributor, and it will be a significant contributor to Clif's results.

Thank you. You're welcome. Thank you. Next question today is coming from Albert Rialini from Jeffrey. Your line is now live.

Hey, good morning. Lorenzo Celso, thank you for taking my question. So just Celso, I think you kind of alluded to it a bit, but the $425 million in total proceeds that are potentially under contract, closure, and agreement, I think you had said that doesn't include some of the larger-scale assets, and I think you had mentioned that those would be on hold until, you know, anything with POSCO were to be finalized. So I guess what I'm asking is that total amount of proceeds from the asset sales could be a lot higher, and then timing would be until anything with POSCO would be finalized. Is that my understanding correct?

So, hey, Albert, so the $425 million, that's the totality of all of kind of our idle plants that we're marketing. And there's interest across the board for all of them. We've received $60 million so far, but we're in discussions to sell the rest, and that would add up to the $425. Beyond that, you know, we have the larger assets that we could sell that there's been some interest around, you know, specifically Toledo HBI and FPT assets. So that would be in addition to the 425. Now, we put these larger asset sales on hold, given, you know, POSCO's interest in our business. They're looking across our entire footprint. So we don't want to jeopardize the POSCO opportunity, which is much bigger. But, you know, for whatever reason, if the POSCO opportunity were to not materialize, we could pick up where we left off on the larger asset sales, and we've had some meaningful interest in those as well. So that would be in addition to the 425. You're correct.

Thank you. Albert, just a slight correction. It's also said on the discussion, some of the discussions are already signed contracts. So we are a little beyond just discussions. We have contracts in place, and it's a matter of going between a binding contract and a sale agreement at closing. These transactions are real. It's a matter of time for closing. So like we have done so far, we're the ones that already closed.

Thank you for the clarity. Thank you. Thank you. We've reached end of our question and answer session. and I'd like to turn the floor back over for any further closing comments.

Thank you very much, and you guys have enjoyed 2026 as much as Cleveland Cliffs will. I appreciate your interest in our company. Thanks a lot. Bye now.

Thank you. That does conclude today's teleconference webcast. Let me disconnect your line at this time, and have a wonderful day. We thank you for your participation today.