Photronics Inc Q1 FY2026 Earnings Call

Welcome to the Photronics First Quarter and Fiscal Year 2026 Earnings Conference Call. At this time, all participants are in a listen-only mode. After the speaker's presentation, there will be a question-answer session. To ask a question during the session, you will need to press star 11 on your telephone. You will then hear an automated message advising your hand is raised. To withdraw your question, please press star 11 again. Please be advised that today's conference is being recorded. I would now like to hand the conference over to your speaker today, Ted Moreau, Vice President of Investor Relations. Please go ahead.

Thank you, Operator. Good morning, everyone. Welcome to our review of Photonics' Fiscal First Quarter 2026 financial results. Joining me this morning are George Macracostas, Chairman and Chief Executive Officer, Eric Rivera, President and Chief Financial Officer, and Frank Lee, Head of Asia Operations. The press release reissued Wednesday morning, along with the presentation materials accompanying our remarks, is available on the Investor Relations section of our website and on the Form 8K filed with the SEC. This call includes forward-looking statements that involve risks and uncertainties which could cause Photronics' results to differ materially from management's current expectations. We encourage you to review the forward-looking statements disclosure closure included in our earnings release and in our most recent SEC filings. In March, I will be attending the upcoming OFC trade show in Los Angeles and would welcome the opportunity to meet with investors. With that, I will now turn the call over to George. Thank you, Ted, and good

morning, everyone. Accelerating demand during fiscal Q4 continued throughout fiscal Q1 with sales increasing 4% sequentially to $225 million, exceeding expectations. We executed on the robust high-end demand in Asia ahead of Chinese New Year, propelling our high-end IC business to a second consecutive quarterly record. Revenue and gross margin strength contributed to GAAP-diluted EPS of $0.74 and non-GAAP-diluted EPS above expectations at $0.61 per share. Over the past nine months and stepping into the CEO role, I have prioritized strengthening our operating efficiency. While I'm not sharing specific metrics today, we have been making pinpoint actions to drive continuous improvement. We are executing with urgency and discipline to continue to elevate quality, improve yield, accelerate cycle times, and enhance customer experience. We're optimistic that our improved operational performance will drive higher revenue and continued market share gains as the industry demand expands. And our IC business revenue of $165 million increased 7% year-over-year with our high-end business growing 19%. We continue to recognize growth for masks that support exciting areas such as AI-driven chip packaging applications and masks for high NA EUV development projects. We believe the high-end strength will continue as ordered demand remains healthy to partially mitigate the upcoming seasonal impact following Chinese New Year. As we leverage our global footprint and strengthen sales leadership, we are sharpening our focus on high-end opportunities that advance our node migration strategy while broadening our geographic diversification. Our ongoing expansion projects in the U.S. and Korea will enter volume production in 2027. Customers in these regions are pursuing broader outsourcing strategies and have been sharing their technology requirements, helping to drive our technical roadmap. In the United States, we continue to see healthy customer qualification activity across both advanced logic and memory technologies. In logic, we are supporting high volume manufacturing at 12 and 14 nanometer, while extending qualifications to 8 nanometer and below technologies. For advanced DRAM memory, we are engaged in qualification activity leveraging our new IP processes using our multi-beam masquerader for patterns below 20 nanometers. Our Allen facility expansion remains on track as we're starting to install tools with customer qualifications expected to be completed by the second half of this year. Our plan is to expand production capabilities in Allen to meet the increasing photomass demand for U.S. mainstream wafer fabs, including technology nodes from 90 nanometer to 40 nanometer. In China, our competitive positioning remains strong in this fast-growing market. We will continue delivering quality masks with an emphasis towards higher-end nodes playing to our competitive advantages and where competitive intensity is lower. Turning to FPD, revenue of $60 million increased 3% year-over-year. At the high end, our technology advantages enable us to produce more complex and larger mask sizes. In Korea, we recently took delivery of, and will soon be installing, the most advanced mask writer for the FPD market. This new writer improves resolution and enhances accuracy while allowing us to maintain high throughput. As the first display mask supplier to have the capabilities this tool provides, we will be extending our technology leadership delivering the highest quality AMOLED photo masks for a variety of applications, including G8.6 mask size, which improves screen quality for consumer electronics. G8.6 AMOLED is a market that remains in its infancy with adoption expected to broaden later this year looking ahead at fiscal q2 we continue to see positive underlying demand while the full seasonal effect of the chinese new year in mid-february will be reflected in revenue design starts remain healthy and support our full year growth trajectory in summary the regionalization of global semiconductor manufacturing combined with increased outsourcing from captives is opening up leading edge opportunities, driving our capability and capacity expansion plans. We remain focused on operational efficiencies and executing on the implementation of these investments to fully capitalize on these opportunities. I will now turn the call over to Eric to review our first quarter results and provide second quarter guidance. Thank you, George. Good morning, everyone. First quarter revenue

exceeded expectations at $225 million, increasing 4% sequentially and 6% year-over-year. IC revenue of $165 million increased 7% year-over-year. We achieved record high-end IC revenue of $71 million, an increase of 19%. Strength in Asia accelerated leading up to Chinese New Year, where we have strategically emphasized high-end opportunities. Revenue in the U.S. increased slightly year-over-year, and we expect the U.S. to be a contributor to revenue growth over the coming year. Mainstream IC revenue was flat year-over-year at $94 million. Turning to FPD, fiscal Q1 revenue of $60 million increased 3% year-over-year. This quarter, we experienced a mixed shift toward strong demand in the mainstream category targeted at the China IT display market. While these projects fall within mainstream, they feature larger-sized screens that align well and play directly to our competitive strengths. We expect demand trends to continue in fiscal Q2 with a modest offset from Chinese New Year. Gross margin was at the high end of expectations at 35%, as we benefited from higher revenue levels and a greater mix of high and IC revenue, which combined to drive up our operating leverage. Operating margin was 24 percent. Diluted gap EPS attributable to Fortronic shareholders was 74 cents per share. Excluding foreign exchange impacts, non-gap diluted EPS was 61 cents per share. Our earnings to shareholders in the quarter reflected the strong demand in Asia leading up to Chinese New Year. We also achieved the second-highest quarter of operating cash flow in the company's history at $97 million, equating to 43% of revenue. CapEx was $48 million, which primarily consisted of equipment to further extend our technical leadership in FPD. As we have previously discussed, we have entered a period of elevated capital investments to drive future organic growth. we are reiterating our fiscal 2026 capex guidance of 330 million with elevated capex focused on special project investments in the u.s and korea along with accelerated end-of-life tool upgrades our initiatives in the u.s and korea will further strengthen our ability to capitalize on growth trends including increased captive outsourcing high-end known migrations geographic diversity and regionalization we continuously review capex plans as we monitor market demand requirements relative to our manufacturing capacity and capabilities and additional projects we are considering total cash and short-term investments increased by 49 million sequentially to 637 million including 459 million held in our joint ventures in which we hold 50.01% ownership interest our capital allocation strategies include three priorities reinvesting for organic growth pursuing strategic opportunities and returning cash to shareholders as a reminder we opportunistically used 97 million to repurchase 5 million shares in fiscal 2025 for an average purchase price of 19.52 cents per share For 2026, we will continue to emphasize internal investments to drive future revenue and earnings growth. Before providing guidance, I'd like to remind you that demand for our products is inherently variable. Visibility is limited with typical backlog of only one to three weeks. Additionally, high-end mass sets carry significantly higher ASPs, meaning even a small number of orders can materially influence revenue and earnings. Demand is also affected by IC and display design activity, and secondarily, by wafer and panel capacity dynamics. Given current market conditions and the seasonal impacts of Chinese New Year that George referenced, we expect fiscal Q2 revenue to be in the range of $212 and $220 million. Based on those revenue expectations in our operating model, we estimate fiscal Q2 operating margin between 22% and 24% and non-GAAP diluted EPS between $0.49 and $0.55 per share. I'll now turn the call over to the operator for your questions.

Thank you. As a reminder to ask a question, please press star 11 on your telephone and wait for your name to be announced. To withdraw your question, please press star 11 again. Our first question comes in the line of Christian Schwab from Craig Hallam.

This is Ben Taxdal in for Christian Schwab. First thing, or my first question is, just with that slight sequential decrease in revenue and operating margin, is there anything else we should be thinking about besides the Chinese New Year? And then my follow-up to that would be, what are some things that need to happen to kind of hit that higher end of that guided range?

Good morning, Ben.

Christian, I think in this year, the Chinese New Year, fall into second middle of February. So most customers, especially the Fairbiz Design House customers, they are taking the long holidays. So we do see the customer table forecast will resume in the middle, in the early of March. So I believe we do have a lot of active week from the orders before the new year. However, because of the temporary slowdown during the long holidays and the first week after the holiday, so there may be slight impact on the output, and that's why our forecast is slightly lower than Q1. Basically, we don't see major difference in the market environment, but the holiday do make some impact on our output okay thanks um good context there um now just

with with the allen with the allen facility coming online and and then just thinking about the high end boise facility um and also kind of the high end ic revenue these last you know two quarters um is there can you kind of can you kind of talk about that and then also maybe a little bit of a proxy for you know the high-end ic going forward is it going to be kind of continued at these these same rates these last two quarters or is it going to be lower higher you know the adam project

actually uh we kick off the project several quarters ago uh in terms of planning the facility clean room expansion so and equipment purchasing right now our clean room has been ready and we have a tour delivered already at this moment we are in the process of installing the new equipment which will be complete and sequentially we need to do certain customer qualification so we believe once the qualification complete Allen side will be able to contribute to our business especially in a mid-range of mainstream at the same time Allen can support our Boise facility take some middle or low and must bear away from Boise so we can spare the Boise capacity for a real high-end business and we will see a lot of high-end opportunities and which we have to maximize our Boise capacity in terms of the product mix also I think both a Georgia and Eric report we are going to do a lot of capex expansion which include Boise high-end capacity expansion to meet a strong I mean high-end customer demand all right

Uh, good. Um, and then just my last question here, switching over to flat panel, um, you know, discussing your, your leadership and AMOLED and, and, and kind of G, uh, 8.6 size or sets or size, um, and the, and the material hire ASPs, uh, with that. But can you remind me of the different applications of that technology and then maybe just help us understand the size and scope of that opportunity over the next few years would be really helpful.

For G8.6, as George reported, it's in the infant stage of business development. we do receive a very first set of G 8.6 photo masks from our Korean customer and we do see a lot of Chinese customer are in the process of developing G 8.6 MRA business so we believe with our process tech capability and also the the most advanced new writer we just install in Korea we will be the leader in g8.6 flat panel business Eric you

have anything to add here thank you Frank I think you covered all here so I I have nothing else to add.

All right, guys. Thank you. One moment for our next question. Our next question comes from the line of Gaoshi Sri from Singular Research.

Can you guys hear me?

Hi, Gaoshi.

Good morning, gentlemen. My first question is on the margins. You've been consistently printing kind of mid-30s, even as mix improves. Do you think there's any risk that we are temporarily over-earning here because of unusually tight, high-end supply? Or is that we should expect some more normalization as more capacity, including your own, comes online over the next year or two?

Hi, Gashi. This is Eric. Q being much different than Q1 at the moment from a product mix perspective. Of course, you know, the market is going to determine that, but that's what we're expecting it to be similar. In terms of our, you know, CapEx that we are projecting, as I mentioned on our prepared remarks, we're entering a stage of elevated CapEx investments as a result of the opportunities the market is affording us, and we will certainly capitalize on them. With that comes increased depreciation, of course, when the tools are in place, but also revenue will increase for many of those projects and those capex that are related to end-of-life tools a lot of our end-of-life tools provide additional capabilities that will enable us to improve our product mix so in general I would say that although margins could surely you know fluctuate you know primarily because of product mix we don't expect our margins to to to like fall off a cliff oh let me also I'm sorry go ahead Gauchi no no it was

it go ahead yeah I was gonna sorry I'm something who was that it was very sorry about preschool and I can comment afterwards I'm passing it on to you Frank that all right thank you thank you gosh you actually we do have a lot of high-end business and as I just mentioned we need to maximize our most advanced advanced side of Boise output and that's one one reason we need to have an insight to take some loading away at the same time to increase the capacity in Boise side we are working with many customer to qualify a new writer called multi bean writer this writer has a much much higher throughput and which can improve our overall diesel capacity so right now it's not really so-called business restraint constraint it's actually a little bit capacity constraints. So with the CAPEX and also with the multi-beam qualification in Boise side, we will try to increase our high-end capacity. And of course, the high-end capacity will contribute greatly to the growth margin. Awesome. Thanks for the color.

Sure. And on the Asia side in China, you said that, you know, it's kind of stabilized stuff, mainstream. Now it's been a couple of quarters. Are you seeing any, the local competitors adjust their behavior or either moving up the node themselves or becoming aggressive on pricing in the segments? Or is it still you're de-emphasizing and could that change the

economics of your stabilized soft mainstream outlet yes sorry we should not talk uh i i think

you talk first i talk later no problem here with respect to asia and china specifically i think uh we're focused on on on the high end uh where there's there's less competition that's where we have a competitive advantage from these new entrants and the increased competition there They're more focused on the mainstream as they learn the business, if you will. So given our strategy, we see our margins relatively flat or slightly improving. It all depends on our product mix. But we're focused on the product mix on the high end where there's less competition. Frank, would you like to add something to that?

Sure, sure. I think in China market, even there are several, many newcomers, but because for customers, the high-end qualification requires a lot of human resource, wafer resource from the wafer fair. So most of our high-end customers, they just have one or two suppliers. They are not really interested to spend a lot of resources to qualify number four, number five. And so we believe the entry barrier for the newcomers to the high-end business is very high. So for ourselves, for Chinese, we do have a facility locally in Shaman, and we are focusing on the high-end business in China. We have a business from major Chinese high-end wafer fab, so we will continue to improve our cycle time, the delivery, and so on, and also to maximize our high-end product mix. So we believe the newcomers may have some negative impact on the mainstream, but on a high-end side, we do have a lot of advantages.

Gotcha. Thanks a lot. So since Asia was the stronger demand, the key driver to the beat, Can you give us a little bit of color on what that demand looks like under the hood? And does that mix look structurally different from what you were seeing a year or two ago?

Okay. I think the main driving force is the diversification because due to the geopolitical reason, the I'm sure in the regionization the customer the design house they have to do their product they have to manufacture their product in different countries so for example if they need to sell their chip to China they need to make their wafers in China Chinese are foundry companies so with this a lot of duplicate paper happens to because the this issue at the same time for Chinese customers because the migration to 22-28 nanometers happened in this year. A lot of companies are doing technology migration as compared to a couple years ago. So we do see a lot of new tap-outs in 22-28 nanometers from our China customers.

Thank you. At this time, I would not like to turn the conference back over to Ted Moreau for closing remarks.

Thank you, Gigi, and thank you, everyone, for joining us today. We appreciate your interest in Portronics and look forward to catching up with everyone throughout the quarter. Have a great day.

This concludes today's conference call. Thank you for participating. You may now disconnect.