Good morning, and welcome to Visei Intertechnology's second quarter 2026 earnings conference call. I am joined today by Jules McCall, our president and chief executive officer, and by Dave McConnell, our chief financial officer. This morning, we reported results for our second quarter 2026. A copy of our earnings release is available in the Invest Relations section of our website at IR.Liche.com. This call is being broadcast live over the web and can be accessed through our website. In addition, today's call is being recorded and will be available via replay on our website. During the call, we will refer to a slide presentation, which we also posted on ir.vshea.com. You should be aware that during today's conference call, we will be making certain forward-looking statements that discuss future events and performance. These statements are subject to risks and uncertainties that could cause actual results to differ from the forward-looking statements. For a discussion of factors that could cause results to differ, please see today's press release and Viché's Form 10-K and Form 10-Q filings with the Securities and Exchange Commission. We are including information in our press release and on this conference call on various gap and non-gap measures. We have included full gap to non-gap reconciliation in our press release and in the presentation posted on IRVShay.com, which we believe will be useful when comparing our gap and not gap results. We use non-GAAP measures because we believe they provide useful information about the operating performance of our businesses and should be considered by investors in conjunction with GAAP measures. Specifically, as it pertains to our tariff refunds, we are reporting GAAP and adjusted revenue for the second quarter. The second quarter, 2026, adjusted net revenues exclude $30.0 million for tariff refunds passed through to customers with no impact on gross profit. The tariff refunds are recognized as reductions of net revenues and cost of products sold in the second quarter 2026 gap results. Adjusted gross margin is calculated using adjusted net revenues. Tariff refunds have not been allocated to a reportable segment, end market, sales channel, or region. All following second quarter 2026 measures presented exclude tariff refunds. Tariff refunds do not impact any other period presented. On today's conference call, management will refer to adjusted revenues in the analysis of results for the quarter. Now I turn the call over to President and Chief executive Joel Smekoff.

Thank you, Peter. Thank you, everyone, for joining our call this morning. Let's start the call with a review of the second quarter performance, and Dave will take you through a detailed review of our financial results for the quarter and our guidance for the third quarter of 2026. After that, I'll update you on the strategic levers we are pulling to drive growth and profitability and then we'd be happy to answer any of your questions for the second quarter we are reporting adjusted revenue of nine hundred and nineteen million dollars exceeding the top end of our revenue guidance revenues are growing faster over the past five quarters on strengthening demand supported by the agility of the Shay 3.0 compared to the first quarter revenue grew 9.5%, 20.5% year-on-year, reflecting continued growth across all Boucher product technologies, our end markets, business channels, and regions. Market share gains for both semis and passives came through higher consumption from increasing customer volume and increasing customer count, with increasing demand in the industrial segment, AI, aerospace, and automotive. In terms of demand dynamics, our Q2 results are a continuation of Q1, and on a year-to-year basis, our results tell us that Bechet 3.0 is working as designed. With industry lead time stretching, pricing, rising, and geopolitical tensions remaining, customers are concerned about the availability of products and assurance of supply. To secure supply, customers are placing orders showing longer visibility. Many customers are forecasting six months out with a desire to replenish their own inventories. Demand related to AI applications continues to accelerate, leading numerous customers to place orders beyond 52 weeks to make sure they have a place in our production loading book to bill for q2 is 1.32 with semis at 1.23 and passives higher at 1.40 q2 is a record high bookings for resistors and inductors as a result our total backlog grew 18% to 1.9 billion dollars or 6.1 months. Having invested $900 million to expand capacity during the recent market trough years, we are reacting much faster than historically to serve more customers. We are demonstrating that we can scale with their volume production while maintaining competitive lead time. Our book to bill is showing us that we are getting turns orders because of the first half 26 improved delivery performance. In the fourth quarter of 25, we began to announce price increases related to increasing cost of metals, materials, and logistics. Price increase announcements continued through Q1 and Q2 this year. At this point, about one-third of our running part numbers have announced price increases. We saw some of the price increases land in our Q2 financials. The attractiveness of our hybrid component business model grows. Our volume manufacturer of both discrete semis and passives helps customers as they search for greater supply of all of these components on their bill of materials. As a reminder, Bichet can populate more than 80% of the components on a board in a power application. Another point to share, customers are more frequently raising their requests for Western supply of electronic components, which fits very well with our geographical manufacturing footprint and further site optimization projects. Bechet is a technically leading Western-located manufacturer, and now with our Bechet 3.0 mindset and customer-serving approach, we can supply them with the product they need. Let's turn to a review of Q2 revenue, starting with the revenue by end market on slide four. All end markets show positive revenue increase with industrial accounting for more than half of the increase. industrial revenue increased 16.2 percent versus q1 and 30.1 percent versus prior year reflecting higher consumption primarily for smart grid ai power and high voltage dc projects as well as factory automation bookings increased due to our ability to serve a growing pos through our distribution channel. New programs are launching the second half of 26 and into 27 with positive demand trends and industrial power for AI, especially as EMS customers accelerate investments in AI-related applications to support data center growth and high-voltage DC transmission. We continue design discussions with customers for humanoids. To elaborate further Further on industrial, our bookings increased for industrial power applications for customers who are participating in power conversion and cooling projects for AI data centers. We are increasing our part count on new projects as customers add our passes to AI power management solutions. Also customers who are not AI related. That demand is becoming increasingly concerning. These customers need to make sure they have a manufacturing spot in our queue. Escalations are increasing. In automotive, revenue increased 3.6% quarter over quarter and 10.1% versus prior year. Reflecting ongoing demand as electronic content continues to increase for driver assist and autonomous driving applications. Plus, the further adoption of hybrid and EV platforms. Bookings were strong in the Americas as customers are becoming more proactive to share their visibility and backlog placement. In some cases, customers are providing us with forecasts for the next 12 to 18 months. In Asia, we are seeing distributors and OEMs wanting to build safety stocks, but this is challenging in this high-demand market. Aerospace defense revenue increased 4.2% versus the first quarter and 15.4% versus last year, reflecting increasing consumption by U.S. defense contractors related to programs that have been funded, including accelerated replenishment of components to support multiple missile programs. In Asia and Europe, we are seeing increasing demand from OEM customers and through EMS. Bookings increase sharply from distribution, driven by orders for resistors in preparation for escalating Department of Defense funding. More products will be needed to support missile programs and also next-generation radar platforms, high-energy weapons for drone defense and drone dominance projects, the Golden Dome, LEO constellations, and many more projects. Healthcare revenue increased 7% versus Q1 and 14.7% versus prior year, with longstanding customers in the Americas ramping production and EMS customers in Asia seeing improving demand and supply assurance uncertainties. We continue to identify opportunities to leverage the full Bichet portfolio in medical. In the other category, which includes telecom, computing, and consumer, revenue grew 11.3% quarter over quarter and 28.4% year over year. Share gains, higher consumption, drove volume increases for AI-related programs in Asia, as did higher demand for AI optical communication network switches. In Europe, higher demand for 5G radio projects increased as customers ramp up production. Memory shortages and higher component prices have tempered the consumer segment's demand strength a bit. Across other end markets and technologies, we continue to proactively tackle a wide array of opportunities to gain share, putting into practice the Vachey 3.0 business-minded approach. Historically, Vachey underserved or didn't serve high-margin customers during market cycles. Bichet 3.0 has been working hard to regain these customers where we had the print position but didn't have the capacity to fulfill orders. I'm pleased to report that we are succeeding at both regaining customers and adding new high margin growth customers for an overall increase in customer count. We are winning back share and in seeing increased design in and quoting activity. Let's turn to slide five for a review of Q2 by channel. Revenue by channel was led by distribution, which increased from 55% of the total in Q1 to 58% in Q2. Distribution revenue increased 15.6% versus Q1 and 24.2% versus last year, with gains in each region driven by broad-based consumption momentum and reflecting market share gains. Based on distribution reports, we are seeing consumption among existing, new, and returning customers. Distribution inventory overall decreased to 18 weeks at quarter end from 20 weeks last quarter, and POS increased 4.7 percent quarter on quarter and 20.5% year-on-year with growth in all regions. Our initiative to expand distributor inventory by part number count and depth during the building of Bechet 3.0 is proving to bring very positive results as we provide strong support in the beginning of this market upcycle. Having a proactive business approach in tune with the availability of product is helping us to win. Strong bookings by distribution customers, particularly for industrial power, AI-related applications, and aerospace defense reflect continued demand momentum amplified by the need to replenish inventory due to stretching lead times. In the Americas, numerous customers are discussing safety stock programs in support of escalating aerospace defense demand. Under Vashay 3.0, we are positioning ourselves to provide far more support to more customers, as reflected in our growing POS and increased SKU count. Good customer support opens up more and more new design opportunities for us. Increasing output to distribution is a top priority, and we are committed to securing share gains and expanding share. Our business unit leaders travel to distributors quarterly to be close to the pulse of the market, gain market visibility, and creating more accountability. OEM revenue was up 1.7% quarter over quarter and 16.8% year over year, reflecting solid demand related to smart grid and AI server power, as well as automotive and medical. EMS revenue increased 3.2% quarter over quarter and 10.8% year over year, reflecting industrial, aerospace defense, and automotive program ramps in all regions, plus strengthening demand in AI. Let's go to slide six for the regions, turning to the geographical mix on this slide. Asia accounted for over half of the revenue increase from the first quarter, increased 12.5% from increased consumption. Sales grew 14.1% in the Americas on increased consumption, with orders for passives reaching the highest level we have seen in more than 20 years, and semis starting to accelerate as many customers move to volume production. America has ended the quarter with a book-to-bill of 1.5. Before turning the call over to Dave, I want to thank the Viché employees and our reps for their hard work as we continue to transform Viché to perform positively in this upcycle and to support more customers. Their knowledge and contribution to the success of Viché 3.0 is well done. Everyone recognizes that Viché is growing because of our work as a team. The early stages of this up cycle are here, and everyone is committed to taking full advantage of the opportunities to drive revenue growth and profitability. Dave, I'll pass the call to you.

Thanks, Joel, and good morning, everyone. Let's start a review of the second quarter results with the highlights on slide seven. Second quarter gap revenue was $889 million. Adjusted revenue was $919 million, exceeding our guidance range and increasing 9.5% sequentially, driven by strong volume growth of 7% and an increase in average selling prices of 2%. As a reminder, the difference between the GAAP and adjusted revenue represents the $30 million of tariff refunds received in the second quarter that will be passed through to our customers in the second half of 2026. Compared to the second quarter of 2025, adjusted revenue increased 21%, driven primarily by an 18% increase in volume and a 2% increase in average selling prices. Favorable foreign currency, mainly from the euro, provided an additional 1% benefit. Moving on to the next slide, presenting the income statement highlights, gross profit was $177 million, delivering a GAAP gross margin of 23.3% and an adjusted gross margin of 22.6 percent. The adjusted gross margin exceeded our guidance and represents an increase versus prior quarter. Prior volumes and improved pricing conditions drove margin expansion, helping to offset ongoing metals, materials, and logistic cost pressures. Depreciation expense was 53 million, relatively flat with quarter one. SG&A expenses were 154 million flat versus quarter one and within the line with our guidance. Gap operating margin was 6%. Adjusted operating margin was 5.8% compared to 2.6% in the first quarter and 1.4% in the second quarter of 2025. EBITDA for the quarter was $105 million for an adjusted EBITDA margin of 11.4% up from 9.3% in the first quarter. Our gap effective tax rate is improving as profitability increases but remains elevated as items such as U.S. taxation of foreign earnings and repatriation taxes continue to have a disproportionate impact on the effective tax rate. Q2 effective tax rate of 33.7 came in below our guidance range as pre-tax earnings exceeded expectations. Earnings per share was 19 cents for both GAAP and adjusted compared to 5 cents per share in Q1 and an adjusted loss per share of 7 cents in the second quarter of 2025. Moving on, slide 9 provides a summary table detailing revenue, gross margin, and book-to-bill ratios across our reportable segments for quick reference. All reportable segments delivered revenue growth quarter over quarter and versus prior year. Turning to slide 10, in the second quarter, our cash conversion cycle improved to 110 days from 116 days in quarter one, in part due to our increased sales volume and our continued disciplined working capital management. DSO improved from 41 days in Q1 to 38 days, primarily due to higher revenues and the impact of our securization program. Inventory days outstanding improved to 102 days due to increased sales volume. Overall inventory increased slightly to $807 million, mainly due to the building of safety stock and raw materials in WIPP, as well as to support the increasing backlog. Continuing to slide 11, you can see we generated $105 million in operating cash for the second quarter, which includes the tariff refunds received that we passed through to customers. We continued to deploy cash for capacity expansion projects. Total cap X for the quarter was $95 million, including approximately $66 million for our new 12-inch wafer fab in Germany. On a trailing 12-month basis, capital intensity was 10.5%, which is a decrease from 11.3% in the prior year. Free cash flow for the quarter was $10 million, reflecting the increased operating income, as well as the tariff refunds received from the U.S. government, and additional net cash inflows related to our accounts receivable securization program. This compares to the negative $47 million in the first quarter. Stockholder returns for the second quarter consisted of our $13.6 million quarterly dividend. We did not repurchase any shares in the quarter. During the quarter, though, we completed a public stock offering of 17.25 million shares of common stock and received cash of $830 million net of issuance costs. At the end of the quarter, our global cash and short-term investment balance was $1.3 billion, and we had $238 million outstanding on our revolver. We used a portion of the proceeds from our public stock offering to repay the outstanding balance on our revolver in July. Our cash and revolver capacity will be used to support an acceleration of our gross initiatives. At the end of the quarter, we had $423 million accessible in our revolving credit facility at the current EBITDA level. The accessible amount increased to approximately $661 million after the repayment of our credit facility in July. Moving on to slide 11 and the guidance for the third quarter of 26 revenues are expected to be between 945 million and 975 million at the midpoint this represents a 21.4 increase year over year and a 4.5 percent increase quarter over quarter taking into account european seasonality gross margin is expected to be in the range of 24.0 percent plus or minus 50 basis points one quarter sooner than our goal of exiting the year at 24 percent quarterly gross margin. Appreciation expense is expected to be approximately $54 million for the third quarter and $215 million for the full year. SG&A expenses are expected to be $155 million plus or minus $3 million. We're continuing to invest in R&D and customer-facing activities as the overall business environment improves. Interest expense is expected to be approximately $7 million for the third quarter. Our gap-effective tax rate remains elevated at low levels of pre-tax income and loss we expect the effective tax rate to become more predictable and in the range of our historical average as earnings grow for the third quarter 26 we expect the effective tax rate to be between 35 and 40 percent the expected share count for eps purposes varies based on the average price of our stock during the quarter primarily due to our convertible debt please refer to slide 21 that displays the range of expected share count for the third quarter finally our stockholder return policy calls for us to return at least 70 percent of our free cash flow to stockholders in the form of dividends and stock repurchases for 2026 we once again expect negative free cash flow due to our capacity expansion plans and i'll turn the call back to joel all right thanks dave let's turn to slide 13 for a review of the strategic levers we are pulling in our efforts to accelerate revenue growth drive margin expansion and enhanced returns.

With the proceeds from our recent equity raise, we have the resources to accelerate our growth plans, allowing us to invest across semis and passive technologies in parallel rather than sequentially. All of the strategic levers are in play. There are eight of them. Each supports our efforts to accelerate revenue growth and drive margin expansion and enhance returns. We plan to spend between $400 million and $440 million in CapEx in 2026, with about half of that earmarked for the investments we're making at our 12-inch fab in Germany. At our 12-inch fab in Germany, all of the equipment has been assembled, and we plan to complete installation in the third quarter, so we are ready to start running engineering wafers toward the end of the year, we remain on track with our goal of starting non-automotive production in mid-2027. At several foundries, we are now ramping up production, which will give us additional wafer capacity to support AI-related application demand starting in the second half of the year. To support the front-end wafer investments, we are working on an initiative to have more dedicated Bechet back-end capacity to reduce our dependency on multiple outside subcontractors on the passive side automotive qualifications at our La Laguna and Juarez facilities are ongoing we are also increasing capacity on our polymer capacitor production by the end of the year and we will have started an expansion of that capacity in La Laguna With expanded capacity, we will be able to support more AI and automotive applications. Through our subcontractor initiatives, we continue to expand our portfolio available for distribution. This positions us to increase our share for the customer bill of materials and outsource low-margin commercial-grade products. Our equity raise also gives us more resources to expand our research and development activities and to reignite a disciplined, value-accretive M&A process. In terms of innovation and our new product development work, we are continuing to execute our silicon carbide strategy and development of GAN to participate in the wideband gap market. To accelerate our innovation work, we are stepping up our evaluation of which technologies to acquire. At the same time, we continue to work on new applications at the component level. This quarter, we have won designs in the area of industrial power management, smart grid battery backup systems, energy storage systems, power modules for industrial heating, solar inverters, and ADOT systems. Our results year-to-date demonstrate the benefits of our Bichet 3.0 initiatives to put the customer first. We continue to work on the gross margin progression toward 30%, the target of our strategic plan. Channel management and product mix management are main priorities, where we proactively and deliberately direct capacity toward higher margin customers and products to improve mix as part of our business-minded approach. under Bechet 3.0. We are no longer simply supporting specific large OEM accounts by taking orders to maximize factory utilization. In closing, our second quarter and first half results demonstrate that Bechet 3.0 is working and propelling us forward to not only take full advantage of the upcycle, outpacing industry growth rates, gaining market share, but also to lay the foundation for sustained growth, leveraging multi-year demand across these markets, and as a new company, expanding margins and enhancing shareholder returns. Olivia, we are now ready to open the call for the first question.

Thank you, Joel. At this time, we will conduct the question and answer session. As a reminder, to ask a question, you will need to press star 11 on your telephone and wait for your name to be announced. To withdraw your question, please press star one one again. Please stand by while we compile the Q&A roster. Our first question comes from the line of Ruplu Bhattacharya from Bank of America Merrill Lynch. Ruplu, your line is now open.

Hi, thanks for taking my questions. Joel, maybe can you talk a little bit more about the use of foundries? What utilization are your fabs running at today and what percent of your manufacturing is at foundries? And can you weave in your expectations for the Newport fab in terms of wafers per month you expect by the end of this year? And same for the fab that's coming up in Germany, what wafers per month capacity are you targeting for 2028?

Pirate Blue. Use of foundries. We have spoke previously about putting our technology structures at foundries in Korea. We have two that we're working with. Additional one in China. Those are coming on board here in the third quarter. That's going to help us increase our capacity for ai wafers and ai end products the newport fab we continue to have the automotive audits we're well into uh the single digits of nine and ten customer audits have been completed a couple more to go getting the customer programs to accept the pcns is the next step and this is taking a little time. We're working with the customer closely. When we get the tier one customer programs approved, the utilization of the Newport fab will increase. We're expecting to see more and more programs approved every month through the end of the year. By having those programs approved in Newport, we're able to open capacity in the Itzaho 8-inch fab, which is going to help us so the capacity increase second half and into the first half of 27 will be it's a hoe 8 inch Korea two foundries and another foundry in China the 12 inch fab we talked about first qualifying the non automotive commercial parts so we can run the fab much faster than Newport was started that is still on target for mid-27 as far as wafer counts we're not

ready to share that at this time we are making good progress with the fabs and capacity okay okay thanks for that we're also getting some so there have been some media reports that for AI applications or power applications maybe some vendors want to use more MLCCs versus polymer tantalum can you give us your thoughts on Vishay's exposure to MLCC and is that something that you would want to increase over time or do you think the exposure to polymer tantalum is more important and what is your current percent of revenue from polymer tantalum and do you plan to expand that? So just MLCC versus polymer tantalum use and your exposure to those.

MLCC, we have products which are more specialized. The MLCCs that we have is more for military and more for medical. We do get some orders for AI or compute programs when the lead times are long from other MLCC suppliers.

We still see the demand for polymer tantalum.

Polymer tantalum in automotive, polymer tantalum in AI. So I know there's some talk about MLCCs versus polymer, but we're still seeing the demand grow for Polymer. We're expanding our Polymer output through the end of this year at the current locations that we're in, and we'll be expanding capacity at a new site in La Laguna, Mexico. So Polymer will be a growing part of our portfolio. We see very long lead times from competition, but the interest from customers is still very strong to add Bechet to this product set.

Okay. If I can just squeeze one more in, Dave, can you talk about like CapEx this year and versus next year? How should we think? Do you think CapEx maintains at this level or do you see that increasing or decreasing? And your spend on CapEx versus buybacks, how should we think about capital allocation if you can give a general framework? Thanks so much for taking my questions.

Okay. Yeah. Hi, Rupert Blue. So I think we're sticking with the 400 to 440 CapEx this year. We're halfway there through six months. Next year, we're not going to give you a number yet. I think what we would say is our capital intensity will continue to drop back down to lower levels and not stay at the $11.10 range. Absolute dollars is still maybe a fairly high number, but as a percentage, as capital intensity number, it should drop.

Okay.

Thank you.

Thank you. Our next question comes from the line of David Williams with Needham. Dave, David, your line is now open.

Good morning, gentlemen, and congrats on the really solid progress here.

Thanks, David.

I guess maybe first on the gross margin line, it seems like you've got some better leverage there as we've kind of inflected. Just kind of curious how you think about the gross margin. Obviously, we have your longer-term targets, and you've pulled that forward a bit. You said in the script maybe a quarter on that 24%, but do you think that we have more room here to grow, and how should we think about this margin kind of going forward? What does that trajectory look like? Has it changed, or are we still kind of where you thought we would be at this point?

We're happy to accelerate that 24% that we said we were going to exit the fourth quarter. We say we can hit that in Q3. We've got a series of initiatives that are going to help the margin. The short term is the volume, for sure. The volume helps us with the variable margin. ASPs, we're increasing ASPs, and that's also helping the variable and gross margin. The channel management, as we look at our backlog and we position our backlog to support higher margin customers, that gives us an immediate short-term impact. Each division has annual cost savings targets they need to hit, so those will be rolling in quarter on quarter. they don't all happen in the first half of the year it takes some time through the year to go maximizing the newport fab we increase the utilization there to carry cost away and make that even more and more accretive quarter on quarter with these automotive program approvals the it's a 12 inch middle of the 27 is going to start helping us there as well we'll get the economies of a 12-inch wafer. The back-end semiconductor finishing, putting that in a low-cost country and reducing our dependency on subcontractors. We've got quite a few of them that are building parts for us, so this will be a help. We won't have to pay the margin of the subcontractor, and we can have it in with Bechet. The factory optimization. We talk about footprint optimization we've got a lot of factories so this is another initiative which begins in 27 staging in 26 starting in 27 28 which is another one of the eight which is going to continue to give us the lift in gross margin we've got many levers to pull here and all of them are active yeah i think david i think to your point though i think what joel just laid out is 28 numbers still not accelerate it again to the beginning of 27, then we're going to reach the 30% from the investor day.

And then, excuse me, you talked a little bit about the escalations in the script as well. Just kind of curious if you could talk about how broad-based that was, and are there any concerns here potentially of getting to a point where we're double ordering or where things maybe are getting a little out of hand, or do you think we're still fairly rational in the ordering pace that we're seeing today?

I think at this point it's still fairly rational. We look at items like the POS. The POS is growing for Bechet, so consumption is going out the door of distribution. The weeks of inventory has gone down each of the quarters. So the distributors, even though they speak about the need to replenish, they haven't been able to do it. People are placing orders farther out because of the concern of the high AI demand that they might miss. Other market segments might miss the opportunity to get products. So we're seeing those orders for positioning to their programs. When I talk to a lot of colleagues across the industry, not seeing the double ordering at this point, there's some long lead time products out there. But at this point, it's supporting consumption. It's supporting demand. We're going to watch it every quarter. We're going to keep watching our indices, our metrics. But at this point, we say we're early. We're early in this upcycle.

And if I could squeeze just one last one in. As you kind of think about the strength within the AI data center, how would you rank that in terms of the demand strength that you're seeing today relative to maybe how you entered the year and what your expectations were? Would you say it's significantly higher, about the same, or just maybe any color around that? And thanks for that.

Demand for AI is growing. With the hybrid model of semis and passives, we're getting more and more passives on the bill of materials, so that's growing. The MOSFETs, the diodes, we've been on the bill of materials. We need to get the Korean foundry moving here in the third quarter with wafers, and then we can support more of the AI MOSFETs and diodes in the later part of the year. So that's growing. I think we're growing at a good rate, pushing for more for sure. There's more that we could support short term. There's continued escalations, not just because of Bechet orders, but we also have opportunities where our competitors are not able to supply and we're getting those escalation opportunities. So AI has continued strong, and we're pushing to be even a bigger player than we are today. Thanks, David.

Thank you. Our next question comes from the line of Melissa Fairbanks with Raymond James. Melissa, your line is now open.

Hey, guys. Thanks very much for taking my question.

Hi, Melissa.

Hi. Good morning. Joel, you kind of provided a lot of color behind this already, but I was kind of curious. This is a question that's been coming up on a lot of calls this quarter. You did communicate that there have been some price increases. You expect to see some price increases. It may not technically be double ordering yet, but are you seeing any pull forwards related to once you communicate these price increases, those people are wanting to get the inventory or the capacity locked in?

Yeah, we see the intention, but the way we're doing the price increases, we are updating the backlog rather quickly. Okay. So to be able to try and get ahead of the queue and have a ship, within weeks we're updating the backlog to the new price. So we don't see that people are able to get ahead of it. We do see tier one automotives trying to put inventory in place. OEMs are pushing them to get some inventory in place. But even that's a challenge because of the loads that are in our manufacturing lines, plus we believe our competitors. It's quite difficult for somebody to try and build inventory and get ahead of something. It's a pretty dynamic business we're in. It's growing in all market segments. Capacities are being filled quarter on quarter. as new capacities land. Those are being loaded very quickly. So I think the price increases are being implemented and not just a paper price increase. I think they're real, they're coming quick, and it's hard for somebody to pull anything ahead.

Okay, great. I assume increase in turns business within the quarter reflects that as well. That's not happening. And it would be great if the tier one auto guys could have learned a lesson from the last supply chain crisis, but here we are.

Yeah, we have this revolving thing going on here, don't we? Yeah.

One last question from me. To the extent that you are expanding the portfolio available for distribution, and that way you're going to capture more content on a board or more content and design. Is there an aspect of demand creation that we may need to think about in terms of impacting the margin, or is that just negligible as we look at increasing content?

For the most part, it's negligible. Getting the strength of the distributor FAEs with their design registration is a good benefit. We've got a Vachey FAEs out there, but when we can multiply the headcount with the distributor FAEs and incentivize them to go out and put Vachey on the bill of materials, it's a plus plus. So the cost is negligible for us.

Okay. Perfect.

Thanks very much, guys.

Thanks, Melissa. Appreciate it.

Thank you. I'm showing no further questions at this time. I would now like to turn the call back over to Joel for closing remarks.

All right. Thank you, To sum up today's call, our Q2 and first half results demonstrate that Bechet 3.0 is working as intended and positioning Bechet to fully participate in the industry upcycle, outpacing industry growth while we continue to gain share, and to prepare Bechet for long-term sustainable growth. In the third quarter, we will be attending the Needham Virtual Semiconductor and Semicap Conference on August 18th. And we'll also be in person at the Citi Global Conference on September 9th. Hope to see many of you there. Thank you very much for attending our call. Have a great week.

Thank you for your participation in today's conference. This does conclude the program. You may now disconnect.