Greetings, and welcome to the Veeco Second Quarter 2023 Earnings Call. At this time, all participants are in a listen-only mode. A question-and-answer session will follow the formal presentation. Please note, this conference is being recorded. I will now turn the conference over to our host, Anthony Pappone, Head of Investor Relations. Thank you. You may begin.

Thank you, and good afternoon, everyone. Joining me on the call today are Bill Miller, Veeco's Chief Executive Officer; and John Kiernan, our Chief Financial Officer. Today's earnings release is available on the Veeco website. Please note that we have prepared a slide presentation to accompany today's webcast. We encourage you to follow along with the slides on veeco.com. This call is being recorded by Veeco Instruments and is copyrighted material. It cannot be recorded or rebroadcast without Veeco's express permission. Your participation implies consent to our recording. To the extent that this call discusses expectations about market conditions, market acceptance, and future sales of the company's products, future disclosures, future earnings expectations, or otherwise makes statements about the future, such statements are forward-looking and are subject to a number of risks and uncertainties that could cause actual results to differ materially from the statements made. These factors are discussed in the business description, management's discussion and analysis, and Risk Factors sections of the company's report on Form 10-K and annual report to shareholders, in our subsequent quarterly reports on Form 10-Q, current reports on Form 8-K, and press releases. Veeco does not undertake any obligation to update any forward-looking statements, including those made on this call, to reflect future events or circumstances at the date of such statements. During this call, management will address non-GAAP financial measures. Information regarding such non-GAAP financial measures, including reconciliation to GAAP measures of performance, is available on our website. With that, I will turn the call over to our CEO, Bill Miller.

Thank you, Anthony. Good afternoon, everyone, and thank you for joining our call today. Veeco had another solid quarter with strong top and bottom line results. Today, I'll take you through our second quarter highlights, provide an update on our markets, and discuss a few significant growth opportunities in more detail. John will provide a financial update and guidance, and then we'll be happy to take questions. Revenue in Q2 totaled $162 million, toward the high end of our guidance range; while non-GAAP operating income reached $24 million and non-GAAP diluted EPS totaled $0.36, both above the high end of our guidance range. Our semiconductor growth strategy of investing in advanced logic and memory to win new customers and applications continues to gain traction as evidenced by record semiconductor revenue during the quarter. In addition to our solid financial results, we're also excited to share several key business wins. First, we shipped LSA systems and received follow-on orders from a Tier 1 customer for high bandwidth memory, enabling artificial intelligence. Second, we received LSA orders from Tier 1 logic customers for their most advanced nodes. And third, we've made further progress towards shipping evaluation systems for nanosecond annealing, or NSA; and ion beam deposition, or IBD, for advanced node semiconductor applications. I'll now provide more details on our markets and review several opportunities we view as integral to our success. Looking first at our semiconductor market. Laser annealing plays a critical role in chip production. As devices continue to shrink, customers require the most advanced technologies to meet increasingly stringent chip process demands. Growth from our laser annealing platform represents our largest opportunity as we expand to new markets, new applications and introduce our NSA system. We saw broad-based demand for our laser annealing platform during the quarter from both leading and trailing edge customers as evidenced by record revenue and robust order activity. Our IBD system for EUV mask blanks continues to be the system of choice for our customers due to its ability to manufacture near defect-free EUV mask blanks. We expect continued demand for these systems as customers add capacity to support increased adoption of EUV lithography. Veeco provides wet processing solutions primarily used for photoresist strip, solvent cleans, and flux removal for high bandwidth memory, and temporary bond material strip. We also provide advanced packaging lithography systems, serving several applications, including copper pillar, bumping, redistribution layers and wafer-level packaging. Based on our strong year-to-date results and order activity, we continue to expect our semiconductor business to be up year-over-year in 2023. Our opportunity in the compound semiconductor market is driven by demand for epitaxy equipment for power electronics applications, including silicon carbide and gallium nitride, in addition to photonics applications such as microLED. Integration of our silicon carbide CVD technology is progressing well, and customer engagement remains healthy. We expect the demo-ready system by year-end, in anticipation of several evaluations with Tier 1 customers next year. We believe our innovative system design offers an opportunity for a differentiated solution and are optimistic our sales, service, and manufacturing infrastructure can position us to gain share in this high-growth market. We also remain committed to our opportunities in GaN and microLED as long-term fundamentals and these markets remain positive. Lastly, looking at our data storage business. Veeco has the most advanced ion beam equipment in the industry, with customers using our products to manufacture thin-film magnetic heads for hard disk drives. As reported, the hard disk drive industry experienced contraction in exabyte shipments in 2022 and 2023, with uncertainty as to the timing of a recovery. However, recent analyst and industry forecasts predict nearline hard disk drive exabyte shipments to grow at an approximate 20% to 25% CAGR over the coming years. Despite current industry challenges, we continue to expect revenue growth in 2023 based on the ship dates of orders in our backlog. I'd like to take a few minutes now to touch on the emergence of artificial intelligence in areas where customers are utilizing our technologies. Opportunities for Veeco are growing as customers adopt our products for AI applications that require higher performance logic and memory content compared to traditional chips. There are three main areas where we are benefiting from AI. First, for GPU chips, Veeco's LSA systems for transistor formation and IBD systems for EUV mask blank manufacturing are established as production tools of record at our customers' most advanced nodes. Looking ahead, we believe there are significant opportunities for our NSA and IBD systems in AI GPU applications where traditional technologies are challenged. Second, HVM DRAM is driving increased demand for our technologies. As previously mentioned, in the second quarter, we received follow-on LSA orders for HVM applications. Equally important, we see future opportunities for NSA and IBD solutions for advanced AI memory applications. And third, Veeco wet processing systems for Flux Clean of micro bumps are enabling advanced packaging for AI at both the sub-module level for HVM and the system product level. Recent wet processing wins validate our position. Our AP lithography systems for bump also enable advanced packaging for AI at the full product level. I'd now like to take a deeper dive into two of our largest semiconductor growth opportunities, beginning with laser annealing. We continue to execute our laser annealing growth strategy in logic and memory by winning new customers and applications. Looking ahead, we expect the opportunities for laser annealing to grow as geometries shrink and requirements and material sets continue to change. As an example, gate-all-around devices require annealing solutions with lower thermal budget and lower contact resistance, both of which our technology is proving to achieve. Our laser annealing platform is the production tool of record for Tier 1 IDMs, foundries, and memory customers for their advanced nodes and is under evaluation for additional applications. In the DRAM memory market, we are in the early stages of ramping HVM applications. Continued innovation is essential to maintaining product leadership. We're excited to advance our NSA platform, which enables laser annealing at broader temperature ranges for significantly shorter dwell times. This technology also enables two classes of applications. The first is low thermal budget annealing for new applications like backside power distribution networks, and the second is material property modifications for new 3D applications. Customer pull for this new product is strong, and we're planning evaluation shipments later this year and in 2024. Turning now to IBD for advanced node semiconductor applications. Veeco's decades of IBD leadership in our data storage business led us to successfully extend this core technology in the semiconductor market for EUV mask blank production. We see opportunities to utilize this technology for advanced node semiconductor applications requiring critical film performance and believe our innovative technology addresses gaps with incumbent technologies like physical vapor deposition, or PVD, for low resistivity metallization and high-density dielectrics. In the area of low resistivity metallization for HVM and logic applications for AI, ion beam deposited tungsten and ruthenium are demonstrating roughly 15% to 20% lower resistivity as compared to PVD solutions. For DRAM, this enables our customers to continue scaling down tungsten bit-line thickness while maintaining electrical performance of the device. For logic, ruthenium-based metallization will enable new integration schemes at future nodes. While this significant opportunity is still in the early stages, initial data has been promising and customer engagement continues to advance with discussions expanding from technical capability to operational readiness and cost of ownership. Our team is focused on successful execution, beginning with shipping IBD evaluation tools to Tier 1 customers later this year and in 2024. As we look ahead, we believe demand for IBD technologies can expand to multiple semiconductor applications. I'll now turn it over to John for a financial update.

Thanks, Bill, and good afternoon, everyone. Today, I will be discussing non-GAAP financial data and would encourage you to refer to our reconciliation between GAAP and non-GAAP results, which you can find in our press release and at the end of the quarterly earnings presentation. Starting with Q2 revenue by market and geography. Revenue totaled $162 million for the quarter, increasing 5% from Q1 and coming in near the high end of our guidance. This was driven by sales to semiconductor customers, which increased 14% sequentially and 9% year-over-year. Our semiconductor business comprised 65% of total revenue as compared to 60% in the prior quarter, led by record laser annealing shipments. Compound semiconductor revenue increased slightly quarter-over-quarter and came in at 15% of revenue. The increase was primarily driven by system shipments for photonics applications. Moving along, our data storage business totaled 9% of revenue, a decline from the prior quarter. And scientific and other made up 11% of revenue, in line with Q1. Now turning to quarterly revenue by region. Revenue from our Asia Pacific region, excluding China, increased to 36% of total revenue versus 25% in the prior quarter, resulting from a significant increase in semiconductor system sales. As forecasted, revenue from China decreased compared to Q1, totaling 31% of revenue. This decline was primarily due to lower LSA system shipments. Looking ahead to the second half of the year, we continue to expect a decline in China revenue versus the first half of the year, with full revenue in the range of 30% of total revenue. The United States was 22% of revenue. And finally, EMEA came in at 11% of revenue for the quarter. Switching gears to our non-GAAP quarterly results. Gross margin came in at approximately 43%, a sequential increase from approximately 42%, and above the high end of our guidance range. Gross margin was positively impacted by higher revenue, favorable product mix, as well as lower spending in service and operations. Operating expenses for the quarter totaled $45 million, in line with guidance. We continue to focus on cost management while maintaining investment for growth. Tax expense for the quarter was approximately $3 million, in line with the prior quarter, resulting in an effective tax rate of 14% in Q2. Net income came in at $21 million and EPS was $0.36 on a diluted share count of 61 million shares. Looking to our GAAP results. We had a net loss of $85 million, or $1.61 per share, principally from a $97 million loss on extinguishment from refinancing a portion of our convertible notes. The loss resulted from paying $301 million for repurchasing 80% of our 2025 and 2027 convertible notes, which were trading at a premium to the net carrying value of approximately $204 million. The company issued 4.5 million shares of stock with a value of $102 million and used $199 million in cash for the repurchase. Turning to the balance sheet and cash flow highlights. We ended the quarter with cash and short-term investments of $287 million, a sequential increase of $34 million. This increase was primarily driven by $24 million of net proceeds from refinancing our convertible notes and $11 million in cash flow from operations, partially offset by $4 million in CapEx. From a working capital perspective, our accounts receivable increased by $10 million to $130 million, with DSOs for the quarter increasing to 72 days. Inventory increased by $19 million from the prior quarter to $244 million, with days of inventory also increasing to 225 days. This increase was attributed to continued investment in our evaluation program and to support revenue growth in the second half of the year. Accounts payable increased sequentially by $1 million to $63 million, while days payable declined to 61 days. Customer deposits increased from the prior quarter by $24 million to $137 million. Long-term debt on the balance sheet was recorded at $274 million, representing the carrying value of about $282 million of convertible notes. In connection with the aforementioned refinancing, we completed a private offering of $230 million of 2.875% convertible notes due in 2029, while also repurchasing $206 million in aggregate principal amount of the outstanding 3.5% convertible notes due in 2025 and 3.75% convertible notes due in 2027. As a result of the transaction, our cash balance and principal balance of debt each increased by $24 million. Key benefits of the refinancing include extending the average maturity of our convertible notes by approximately three years, reducing the weighted average interest rates from 3.6% to 3%; reducing cash interest payments by $900,000 annually; increasing the weighted average conversion price from $21.31 to $27.77, inclusive of the cap call, and is expected to result in lower share dilution. In summary, the refinancing strengthened our balance sheet and financial profile. For additional details related to the refinancing transactions, please refer to the schedules included in the backup and financial tables sections of our earnings presentation. Now turning to our Q3 non-GAAP guidance. Q3 revenue is expected to be between $155 million and $175 million, with gross margin between 42% and 43%. We expect OpEx between $45 million and $47 million, net income between $17 million and $23 million, and EPS between $0.30 and $0.40 on a diluted share count of 59 million shares. Now for some color on our full year 2023 non-GAAP guidance. Based on our current backlog and expected growth trajectory in the second half of the year, we reiterate our 2023 revenue outlook of between $630 million and $670 million. Moreover, we are raising our profitability outlook for the year to account for stronger gross margin, a reduction in net interest expense, and a lower projected tax rate. We now expect gross margin in the 42% to 43% range and non-GAAP EPS between $1.30 and $1.50 per diluted share for 2023. With that, I'll now turn the call over to Bill for closing remarks.

Thank you, John. Before concluding our prepared remarks, I'd like to highlight why Veeco is a compelling investment opportunity and is making progress toward our $800 million target model. First, as an innovative manufacturer of key semiconductor process equipment, Veeco is uniquely positioned with differentiated technologies in growth markets driven by the lasting mega trends we frequently discuss, including high-performance computing and AI. Second, our laser annealing product line is well established and our efforts to expand our footprint to new markets, applications, and products are gaining traction. Third, we have decades of experience and leadership in ion beam technology, and we're continuing to advance our product roadmap. Moving beyond EUV mask blanks, we're now introducing ion beam into wafer-level critical films for the semiconductor industry and are planning to gain share from incumbent technologies. Lastly, we have a long-term opportunity to capitalize on demand in the epitaxy equipment market for several power electronics and photonics applications. And with that, we'll be happy to take your questions. Operator, please open the line.

Thank you. And ladies and gentlemen, at this time, we will conduct our question-and-answer session. Our first question comes from Tom O'Malley with Barclays. Please state your question.

Good afternoon and thank you for the question. Congratulations on the strong results. My first question is about the AI opportunity. You discussed it extensively during the call and shared some slides illustrating what that opportunity could entail. However, I’m more interested in the financial aspect. Can you explain how much of your current revenue is related to HVM? I understand that you've identified a few AI opportunities, but what is the size of your HVM exposure right now? Additionally, what are your long-term expectations for the HVM opportunity and the overall AI opportunity?

Tom, I'll take an attempt at your question. Last year, I would say our contributions from AI were very small, maybe negligible. We did some analysis, and with some assumptions, we're estimating that a little bit under right about 10% of our revenue is attributable to AI. Going forward, we're certainly not going to give too much quantitative color on '24, but clearly, it does seem to be a significant driver. And we're having a lot of qualitative discussions, evaluations, and the like, and it's a focus area, these areas of nanosecond annealing evaluations and ion beam deposition evaluations, and our expectation is these will end up in AI-type applications or at least a significant portion will be in those applications.

Helpful. And then you guys are raising the profitability for the full year. Obviously, there's the reduction in interest expense. You talked about lower tax in gross margin. Could you just highlight on the gross margin side, you saw a pretty significant step-up. Is that mostly related to mix and the higher semi revenue? Is that just certain wins that you guys have gotten? What's given you the confidence that, that gross margin profile is higher than it was originally?

Yeah. Well, first of all, Tom, the first half of the year results were a bit higher than initially forecasted. So half the year is behind us here where our gross margin came in better. I think as we looked at this particular quarter, the volume was a bit higher than originally forecasted and we did see a bit of a mix impact positively. And then we've been seeing a bit of improvement on logistics cost and controlling operations and service spending. As we look out for the balance of the year now, we're raising our guide for the second half of the year slightly and to come in slightly higher than the first half of the year.

Got you. And if I could just sneak one more in, you guys oftentimes give a little color on the out quarter for what you see by segment for your businesses. Could you just help us out with, in the September quarter, what you guys are seeing? Thank you.

Sure, Tom. So at the midpoint of the guide, we're guiding about $165 million of revenue for Q3. And I would say that we expect semi to be slightly down after a record quarter in Q2, and we're not forecasting another record in Q3 at this point. We see compound semi being flat. We've been talking about for a number of quarters now that we expect our data storage revenue to be up in the second half of the year. So we are expecting that in the third quarter, data storage to be up, could be in the $30 million range for Q3, and we're expecting scientific flat.

Yeah. Thanks for taking my question. I guess the first one is a little bit of a follow-up on the high-bandwidth memory opportunity, or just memory in general. Could you just discuss how big you think the LSA TAM is in the foundry and logic business and perhaps compare that to the memory business? And it's my recollection, at least in the foundry and logic business, that you kind of won one advanced node, then you picked up other nodes or other applications. How do you expect the high bandwidth memory business to unfold over the next year or two?

Dave, I would say in memory, in general, Veeco has very little exposure to memory. That being said, we just had our first foray in the high bandwidth memory, winning an HVM application for laser annealing. So we've been sizing the logic portion of laser annealing at about $400 million a year. And then with this one success that we have, we've kind of sized it currently with this one success at about $100 million. But I think if you look three to five years out, as we can hopefully win more customers and kind of land and expand in memory, we could see that opportunity growing to be comparable size to logic, so going from $400 million in logic to another $400 million in memory.

I would like to know more about the epi tool for silicon carbide. It seems you've made a significant investment in that market. How large do you estimate the epi tool market to be? What advantages do you believe your tool has in this sector? While I recognize your extensive experience with epi in other markets, I'm interested in your thoughts on its specific advantages for the silicon carbide market.

Yeah. We're really excited about the acquisition. From talking with customers, they're very excited about the technology that we acquired. The challenge was they were a smaller company and really not bankable. And so I think their technology, plus Veeco's manufacturing, service and sales support, logistics worldwide, really opens up a lot of doors. And we're seeing very strong engagement from customers. Regarding the first half of your question regarding the market size, we're estimating that market to be in the $200 million to $300 million a year at this time and then maybe by 2027 kind of growing to about $0.5 billion in the future.

Okay. Thank you.

Thank you, Dave.

Just wondering, I think you mentioned some microLED developments later this year. Can you give a little more color on that?

What we've seen, as we've pretty broadly discussed, is microLED pushing out about a year. And so we're actually, I think, very well positioned. We've developed a new arsenide phosphide product to intercept the microLED market when it happens. We're also selling tools for GaN-on-Silicon for disruptive microLED applications. So Mark, I would say microLED has the potential to be a large opportunity, but it's probably not going to be in a significant volume until 2025 timeframe.

Thank you.

Thank you, Mark.

There appears to be no additional questions at this time. I'll hand the floor back to Bill Miller, CEO, for closing remarks.

I want to thank our customers and shareholders along with the Veeco United team for their continued support as we execute our growth strategy. Have a great evening, everyone.

Thank you. And with that, we conclude today's call. All parties may disconnect.